Lignin Depolymerization Research Articles

Recent Advances in Depolymerization and High-Value Utilization of Lignin: A Review

Recent Advances in Depolymerization and High-Value Utilization of Lignin: A Review

Aqueous Electrocatalytic Hydrogenation Depolymerization of Lignin β-O-4 Linkage via Selective Caryl-O(C) Bond Cleavage: The Regulation of Adsorption.

The cleavage of the benzene-oxygen (Caryl-O(C)) bond of the lignin β-O-4 linkage is expected to relieve condensation of the degradation product and improve the product value. Nevertheless, the electrochemical breaking of the Caryl-O(C) bond has not been achieved yet due to the high dissociation energy (∼409 kJ mol-1) and the easy over-reduction of aromatic compounds. Here, we report an aqueous electrochemical reduction strategy for breaking Caryl-O(C) bonds via the regulation of molecular adsorption. The density functional theory (DFT) calculations and quartz crystal microbalance (QCM) measurements reveal that the residual Cu(I) in the CuO electrocatalyst enhances the adsorption of the 2-phenoxy-1-phenylethyl alcohol (PPE) by the Caryl-O(C) bond and lowers the energy barrier of the protons attacking the oxygen atom in the β-O-4 linkage. Thus, compared to the Cu electrocatalyst (with a hydroquinone yield of 47.4% and a benzyl alcohol yield of 24.8%), the CuO nanorod exhibits a much higher yield of hydroquinone (95.3%) and benzyl alcohol (88.6%) at a potential of -0.4 V vs reversible hydrogen electrode (RHE) in an undivided cell. Moreover, the reaction pathway and the cleavage of the Caryl-O(C) bond are identified through a combination of in situ synchrotron-radiation Fourier transformed infrared spectroscopy (SR-FTIR) and DFT calculations. This effective method is utilized for poplar lignin electrolysis, yielding 10.9 wt % of guaiacylglycerol, with an outstanding selectivity of >63.0%. This work provides an efficient and mild method of cleavage of Caryl-O(C) bonds in lignin valorization.

Heterogeneously Catalyzed Reductive Depolymerization of Lignin to Value-Added Chemicals.

Lignin is an abundant renewable source of aromatics, but its complex heterogeneous structure poses challenges for its depolymerization and valorization. Heterogeneously catalyzed reductive depolymerization (HCRD) has emerged as a promising approach, utilizing heterogeneous catalysts to facilitate selective bond cleavage in lignin and hydrogen transfer to stabilize the products under mild conditions. This review provides a comprehensive understanding of the hydrogen transfer mechanisms in HCRD, involving different hydrogen sources, including molecular hydrogen, alcohols, formic acid, etc., and the native hydrogen donor groups in lignin. The interaction between hydrogen sources and catalyst design is explored, emphasizing how catalyst characteristics must align with specific hydrogen transfer pathways to optimize efficiency and selectivity. Precious metal-based and non-precious metal-based catalysts are examined, highlighting advances that enhance hydrogen activation and transfer. Comparative analyses of hydrogen sources reveal distinct advantages and limitations. The significance of HCRD in lignin valorization and the development of integrated biorefineries is underscored, emphasizing its potential to contribute to a sustainable bioeconomy through improved process integration and economic viability.

Selective Adsorption of Lignin Peroxidase on Lignin for Biocatalytic Conversion of Poplar Wood Biomass to Value-Added Chemicals.

Lignin-first biorefineries aim to maximize the valorization of lignin by prioritizing its conversion over other biomass components. This study investigates the selective adsorption of lignin peroxidase (LiP) isozymes from white rot fungi Phanerochaete chrysosporium on lignin, aiming to enhance the biocatalytic conversion of poplar wood biomass into value-added chemicals. The research focuses on the adsorption characteristics of ten recombinant LiP isozymes, particularly PcLiP03, which exhibited the highest adsorption capacity on lignin and negligible adsorption on cellulose. Adsorption isotherms and structural analyses revealed that hydrophobic interactions significantly contribute to the selective adsorption of PcLiP03. Applying PcLiP03 in a continuous stirring cell system effectively converted lignin in unpretreated poplar wood to 2,6-dimethoxy-1,4-benzoquinone under ambient and mild conditions, highlighting its potential for selective lignin depolymerization in integrated biorefineries. This work underscores the importance of enzyme-substrate interactions and offers a promising approach for more efficient and sustainable biomass utilization.

Insights into a photo-driven laccase coupling system for enhanced photocatalytic oxidation and biodegradation

Effective depolymerization of lignin into environmentally friendly aromatic chemicals under mild conditions is gaining interest. Fungal laccase is capable of catalyzing a wide range of reactions, but its low redox potential and preference for acidic pH limit its potential applications. Herein, we developed a laccase-methylene blue (LAC-MB) coupling system, combining the selectivity of enzyme catalysis with the high reactivity of photocatalysis, for the efficient degradation of lignin model compounds. Theoretical calculations indicate that the electron donor’s distance to the LAC’s active site T1 Cu is shortened from 29.7 to 7.3 Å in the LAC-MB. In this system, MB, possessing strong interaction with T1 Cu, acts as a light absorber, enabling the rapid transfer of photogenerated electrons to T1 Cu. This significantly enhances the degradation rate of guaiacol (GUA) from 28.8 % to 91.46 %. The LAC-MB can oxidize both phenolic and non-phenolic lignin model compounds under red-LED irradiation with wide pH ranging from 3.0 to 7.0 and high-efficiency. By tuning the primary coordination sphere and the access tunnel of T1 Cu, we further revealed that enhanced binding affinity and active site accessibility for the LAC-MB complex attributed to the photocatalysis’s high reactivity. Based on this, LAC variants with enhanced binding capabilities were constructed and the resulting mutant LAC-MB are characterized by higher oxygen consumption and ROS generation activated by red-LED, specifically a higher quantum yield of 1O2, demonstrating increased electron transfer and light-driven reactivity. This photo-enzyme coupling system presents a new pathway for the high-efficiency processing of lignocellulosic biomass and offers insights for designing future artificial photosynthetic systems.

Exploration of microwave absorptivity and catalysis of CMF@Co-MoS2 for microwave-initiated depolymerization of lignin

Obtaining key platform chemicals from lignin is a sustainable refining concept of the non-petroleum route. Rapid pyrolysis is a potential refining technology, and microwave-assisted catalytic depolymerization with low energy consumption is preferred. Herein, we reported the strategy of microwave-initiated depolymerization using a self-designed dynamic vapor flow reaction system with a facilely prepared CMF@Co-MoS2-0.18 catalyst, achieving efficient conversion of lignin (Dealkalize) to monophenol. Under constant microwave irradiation (2.45 GHz), the CMF@Co-MoS2-0.18 catalyst had excellent dielectric properties (Dielectric loss factor: 0.56) and microwave heating properties (∼140 s rise to ∼ 600℃). Therefore, microwave-initiated depolymerization of lignin showed that the CMF@Co-MoS2-0.18 catalyst can improve the monophenol content (54.72 %) and phenol selectivity (35.84 %) under the synergistic effect of microwave absorptivity and catalysis. The reaction of the lignin model and kinetics analysis show that the CMF@Co-MoS2-0.18 catalyst increases the yield of monophenol by reducing depolymerization activation energy and selectively breaking the β-O-4 bond. The finite element analysis pointed out that under microwave irradiation, CMF@Co-MoS2-0.18 continuously conducted heat to lignin and the lignin vapor would have sufficient energy to collide with the catalyst active site at a high frequency, which led to an increase in the pre-exponential factor and initiated catalytic depolymerization lignin. In summary, we provide a potential pathway for the rapid conversion of lignin into key platform chemicals.

Step Towards Enzymatic Bioelectrorefinery: Design of a Ligninolytic Hybrid Air‐Breathing Biocathode

AbstractLignins, abundant aromatic biopolymers and one of the major components of lignocellulosic biomass, remain the most underutilized renewable bioresources of aromatics and hydrocarbons on the Earth. Numerous physical and chemical processes have been developed for lignin valorization; however, they generally suffer from environmentally unfriendly, harsh conditions and lack reaction specificity. On the other hand, milder methods involving biocatalysts exist but are impeded by many limitations, such as cofactor regeneration, deleterious enzyme–lignin interactions, and low stability. In this work, we attempt to eliminate the constrains encountered in enzyme‐based lignin valorization processes through the development of a novel electrochemically assisted bioprocess. This “all‐in‐one” biocathode incorporates a hybrid electrocatalytic interface combining a hydrogen peroxide‐generating passive air‐breathing gas diffusion electrode with an immobilized hydrogen peroxide‐consuming lignin peroxidase on a single surface and catalyzing the depolymerization of lignins. The ligninolytic potential of this bioelectrochemical device is demonstrated using both lignin models (veratryl alcohol and veratrylglycerol β‐guaiacyl ether) and a technical lignin at room temperature in aqueous media with the reaction efficiency of 14.9% per hour.

Sustainable pretreatment method of lignocellulosic depolymerization for enhanced ruminant productivity using laccase protein immobilized agarose beads

Laccase, the selectively lignin degrader, vital to the initiation of lignocellulosic deconstruction was immobilized onto activated agarose beads to increase its reuse potential. Laccase cross-linked beads (~ 3.42 mm) recorded a specific activity of 23 Umg− 1, retaining about 80.43% enzyme activity after 45 days of storage. The immobilization yield and efficiency were 89% and 97% respectively. The equilibrium data fitted the Freundlich equation (R2 = 0.9987) demonstrating multilayer adsorption and the presence of Cu, Fe, and S in the elemental analysis of immobilized beads established effective binding between activated agarose beads and the laccase protein. Characterization studies of the immobilized laccase-treated crop residues revealed significant differences in the lignin polymer after each treatment cycle. An increase in digestibility of 26.21% and 7.62% was observed in paddy and finger millet-treated straws respectively, over the controls corroborating efficient lignin depolymerization. The propitious performance of laccase beads authenticated in the batch enzymatic reactor to treat crop residues paves headway as a sustainable green technology in the deconstruction of crop residues for use as ruminant feed, augmenting productivity.

Bio-Oil Production by Depolymerization and Hydrodeoxygenation of Lignins over Mg–Ni–Mo/Activated Charcoal in Supercritical Ethanol

Bio-Oil Production by Depolymerization and Hydrodeoxygenation of Lignins over Mg–Ni–Mo/Activated Charcoal in Supercritical Ethanol

An oxidative depolymerized lignin treated by potassium ferrate and its use in preparation of epoxy resin

AbstractLignin, as an industrial by‐product, can be used as a phenolic substancen. In this study, enzymatic hydrolysis lignin (L) was treated with potassium ferrate and phenol respectively to obtain oxidized lignin (OL) and phenolated lignin (PL). Their phenolic hydroxyl content (PhOH) increased by 29.1% and 40.5%, respectively. Then four kinds of epoxy resins were prepared, namely lignin‐free epoxy resin (LFER), L epoxy resin (LER), PL epoxy resin (PLER), and OL epoxy resin (OLER). Gel permeation chromatography (GPC) and Fourier transform infrared analyses indicated that potassium ferrate oxidation could decline the molecular weight (Mw) and increase the PhOH of L. Mechanical properties test and dynamic mechanical analysis (DMA) results show that cured OLER (OLEN) has higher crosslinking density and better mechanical properties (shear strength increased by 14%, tensile strength increased by 15%) than cured LER (LEN). Thermogravimetric analysis results show that OLEN has better thermal stability than cured LFER (LFEN) and LEN. In addition, scanning electron microscopy images showed that the modified L had better compatibility. This study presents a novel approach for lignin oxidation.

Unveiling lignocellulolytic potential: a genomic exploration of bacterial lineages within the termite gut

BackgroundThe microbial landscape within termite guts varies across termite families. The gut microbiota of lower termites (LT) is dominated by cellulolytic flagellates that sequester wood particles in their digestive vacuoles, whereas in the flagellate-free higher termites (HT), cellulolytic activity has been attributed to fiber-associated bacteria. However, little is known about the role of individual lineages in fiber digestion, particularly in LT.ResultsWe investigated the lignocellulolytic potential of 2223 metagenome-assembled genomes (MAGs) recovered from the gut metagenomes of 51 termite species. In the flagellate-dependent LT, cellulolytic enzymes are restricted to MAGs of Bacteroidota (Dysgonomonadaceae, Tannerellaceae, Bacteroidaceae, Azobacteroidaceae) and Spirochaetota (Breznakiellaceae) and reflect a specialization on cellodextrins, whereas their hemicellulolytic arsenal features activities on xylans and diverse heteropolymers. By contrast, the MAGs derived from flagellate-free HT possess a comprehensive arsenal of exo- and endoglucanases that resembles that of termite gut flagellates, underlining that Fibrobacterota and Spirochaetota occupy the cellulolytic niche that became vacant after the loss of the flagellates. Furthermore, we detected directly or indirectly oxygen-dependent enzymes that oxidize cellulose or modify lignin in MAGs of Pseudomonadota (Burkholderiales, Pseudomonadales) and Actinomycetota (Actinomycetales, Mycobacteriales), representing lineages located at the hindgut wall.ConclusionsThe results of this study refine our concept of symbiotic digestion of lignocellulose in termite guts, emphasizing the differential roles of specific bacterial lineages in both flagellate-dependent and flagellate-independent breakdown of cellulose and hemicelluloses, as well as a so far unappreciated role of oxygen in the depolymerization of plant fiber and lignin in the microoxic periphery during gut passage in HT.Ak1UNwnHwhcNN-Fj12kHobVideo

Guidelines for Identifying the Structure of Heavy Phenolics in Lignin Depolymerization by using High-Resolution Tandem Mass Spectrometry.

The efficient conversion of lignin contributes to reducing human reliance on fossil energy. As a complicated biopolymer, studies on the mechanism of lignin depolymerization is limited by inadequate structural identification of high molecular weight (MW) products like heavy phenolics. Up to now, no individual method can generate both MW and structural information in operando conditions. As a promising approach, tandem mass spectrometry (MS/MS) techniques can provide structural information via the dissociation of target ions. In this study, MS/MS technique was performed both in offline and in-situ mode during lignin depolymerization. The fundamental guidelines based on MS/MS dissociation principles for typical inter-unit linkages like β-O-4, 5-5, β-β, β-5, and β-1 were well established. Based on that, major phenolic dimers are successfully identified, including chemical formula and types of inter-unit linkages. More significantly, real-time monitoring of structural evolution was achieved by applying in-situ MS/MS analysis during lignin depolymerization. The results show the different evolution pathways of isomers with same chemical formula, confirming that structural changes during lignin depolymerization are common and obvious. Overall, this study develops an advanced strategy for the full-view analysis of lignin depolymerization, achieving the static analysis of composition and structure, both monitoring the dynamic evolution of structures.

Oxidative Catalytic Depolymerization of Lignin into Value-Added Monophenols by Carbon Nanotube-Supported Cu-Based Catalysts

Lignin valorisation into chemicals and fuels is of great importance in addressing energy challenges and advancing biorefining in a sustainable manner. In this study, on the basis of the high microwave absorption performance of carbon nanotubes (CNTs), a series of copper-oxide-loaded CNT catalysts (CuO/CNT) were developed to facilitate the oxidative depolymerization of lignin under microwave heating. This catalyst can promote the activation of hydrogen peroxide and air, effectively generating a range of reactive oxygen species (ROS). Through the application of electron paramagnetic resonance techniques, these ROS generated under different oxidation conditions were detected to elucidate the oxidation mechanism. The results demonstrate that the •OH and O2•− play a crucial role in the formation of aldehyde and ketone products through the cleavage of lignin Cβ-O and Cα-Cβ bonds. We further evaluated the catalytic performance of the CuO/CNT catalysts with three typical lignin feedstocks to determine their applicability for lignin biorefinery. The bio-enzymatic lignin produced a 13.9% monophenol yield at 200 °C for 20 min under microwave heating, which was higher than the 7% yield via hydrothermal heating conversion. The selectivity of G-/H-/S-type products was slightly affected, while lignin substrate had a noticeable effect on the selective production. Overall, this study explored the structural characteristics of CuO/CNT catalysts and their implications for lignin conversion and offered an efficient oxidation approach that holds promise for sustainable biorefining practices.

Methacrylated Biosyrups of Depolymerized Lignin for Radiation-Curable Bioaromatic Resins and Functional Nanoscale Coatings

Methacrylated Biosyrups of Depolymerized Lignin for Radiation-Curable Bioaromatic Resins and Functional Nanoscale Coatings

Accessing monomers from lignin through carbon-carbon bond cleavage.

Lignin, the heterogeneous aromatic macromolecule found in the cell walls of vascular plants, is an abundant feedstock for the production of biochemicals and biofuels. Many valorization schemes rely on lignin depolymerization, with decades of research focused on accessing monomers through C-O bond cleavage, given the abundance of β-O-4 bonds in lignin and the large number of available C-O bond cleavage strategies. Monomer yields are, however, invariably lower than desired, owing to the presence of recalcitrant C-C bonds whose selective cleavage remains a major challenge in catalysis. In this Review, we highlight lignin C-C cleavage reactions, including those of linkages arising from biosynthesis (β-1, β-5, β-β and 5-5) and industrial processing (5-CH2-5 and α-5). We examine multiple approaches to C-C cleavage, including homogeneous and heterogeneous catalysis, photocatalysis and biocatalysis, to identify promising strategies for further research and provide guidelines for definitive measurements of lignin C-C bond cleavage.

Catalytic depolymerization of lignin for hydrocarbon rich bio-oil production: Influence of Ni doped on LaCoO3 catalysts and hydrogen sources

Catalytic depolymerization of lignin for hydrocarbon rich bio-oil production: Influence of Ni doped on LaCoO3 catalysts and hydrogen sources

Synthesis and Characterization of Cu<sub>2</sub>O/ CuO Quantum Dots as Photocatalyst for Lignin Depolymerization via Reactive Oxygen Species: A Preliminary Study

Lignin is a type of polymer with diverse functional groups that can be transformed into biofuels and various high-value chemicals. By utilizing light energy and operating at low temperatures, photocatalysis via Reactive Oxygen Species (ROS) becomes a promising strategy to develop further. However, the revelation of photocatalyst mechanisms in ROS production to improve the efficiency and effectiveness of lignin transformation is still limited. This study aims to determine the effect of Cu2O/CuO quantum dots (QDs) concentration in the photocatalyst system on lignin depolymerization via ROS. The wet chemical method was used to synthesize Cu2O/CuO QDs. The property determination of absorbance, crystallinity, and particle morphology is characterized using uv-vis, X-ray diffraction (XRD), and Transmission Electron Microscope (TEM) instrument. The ROS production was measured using a UV-vis instrument by varying the Cu2O/CuO QDs concentration (1, 3, and 5 μM). The depolymerization sign was observed using a Fourier-Transform Infrared Spectroscopy (FTIR) instrument. The result shows that the synthesized material has a Cu2O/CuO phase with an average particle size of 8 nm and a band gap value of 2.35 eV. The optimum ROS production activity was achieved at the Cu2O/CuO QDs 3 μM concentration, reaching ten mM/sec. The FTIR result also confirms that the functional group transformation occurred. Overall, this study provides brief insight for further optimization of the lignin depolymerization photocatalysis process.

Efficient cleavage of Cα[sbnd]Cβ bonds in lignin using tetrabutylammonium tetrafluoroborate as both the catalyst and auxiliary electrolyte

Lignin is a promising alternative to fossil resources due to its abundance of benzene ring monomers. However, the stability of the CαCβ bond in lignin has hindered its efficient depolymerization. Electrochemical methods for breaking this bond are not well-studied. This paper presents a novel approach for catalytic depolymerization of lignin to produce acetals under mild conditions, without the need for additional catalysts. Under room temperature and in an air atmosphere, the combination of tetrabutylammonium tetrafluoroborate (TBABF4) as an auxiliary electrolyte and methanol (MeOH) as a solvent has shown high selectivity in catalyzing the cleavage of CαCβ bonds in lignin. Over 90.0 % of the resulting products are acetals, with the optimal conditions being a substrate concentration of 0.02 M, TBABF4 concentration of 0.008 M, a constant current of 30 mA, and a reaction time of 3 h. This led to a substrate conversion rate of 95.8 % and a product yield of 98.0 % for benzaldehyde dimethyl acetal (Bda). The mechanism study reveals that the tributyl ammonium radical cation decomposed by TBABF4 is adsorbed on the electrode surface. Subsequently, the adsorbed O2 is activated to form superoxide anion radical active species through single electron transfer, which plays a crucial catalytic role. TBABF4 acts as both an auxiliary electrolyte and a catalyst in this process. This research introduces a novel approach for electrocatalytic depolymerization of inert CαCβ bonds in lignin, leading to the selective conversion into acetal chemicals.

Hydrogenolysis of guaiacol and lignin to phenols over Ni/Nb2O5[sbnd]HZSM-5 catalyst

Selective hydrogenolysis of CAr-O bonds in lignin to produce aromatic compounds typically necessitates severe conditions. We developed a Ni/Nb2O5HZSM-5 catalyst that facilitates direct cleavage of guaiacol's aryl ether bonds at reduced temperatures (200 °C) and pressure (0.1 MPa H2), achieving a conversion of 89.5 % with the selectivity of phenol at 81.7 %, while retaining its activity after five cycles. The Ni/Nb2O5HZSM-5 exhibits a higher yield of phenol (49.1 mmolphenol·gNi−1·h−1), currently achieving the highest phenol yield among Ni-based catalysts. The addition of Nb2O5 enhances the dispersion of Ni and augments the effective surface area. In addition, the strong interaction of Nb with the HZSM-5 changed the electronic state of Nb and enhanced the resistance of the catalyst to high temperature and mechanical stress. Employing this catalyst for lignin depolymerization in an aqueous medium led to a 17.0 wt% yield of alkyl phenolic compounds. This approach represents an advancement in biomass resource conversion, circumventing the dependency on high-pressure and precious-metal catalysts, and signaling a new trajectory for sustainable biomass utilization in scientific research.

Highly efficient lignin depolymerization and enhanced bio-oil upgrading via in-situ hydrogenation: Impact of lignin structure

The inherent structural rigidity of lignin poses a significant challenge to its direct hydrogenation to produce aromatic compounds, requiring harsh reaction conditions. In this study, microwave-assisted hydrothermal liquefication was employed to rapidly generate raw bio-oil under mild conditions, coupled with an in-situ hydrogenation strategy to upgrade its quality. A series of lignin substrates were characterized to establish the relationship between lignin characteristics and aromatic products. Grass lignin can produce low molecular weight bio-oil in high yields (50.4–60.7 %) within 30 min at 180 °C, which is attributed to the abundance of cleavable β-O-4 linkages in its uniform structure. In contrast, softwood lignin with abundant guaiacyl (G) units possessed a robust thermal stability, resulting in a low monomer yield, but a high selectivity to G-type products (97 %). The raw bio-oil was further upgraded through in-situ hydrogenation with Pd catalysts. Low reaction temperatures (60–100 °C) favored the hydrogenation of aromatic aldehydes and ketones to their alcohol products, while high temperatures (100–220 °C) promoted the deep hydrogenation of aromatic side chains to alkyl products. Besides, an upgraded bio-oil with a higher heating value (29.8 MJ/kg) was obtained. Furthermore, the hydrogenation mechanism was investigated through the kinetics of simulated bio-oils. The activation energy follows the order: dimer β-O-4 linkage < monomer aldehyde group < ketone group < CC linkage, which is consistent with the hydrogenation kinetics observed in real lignin bio-oil. Overall, this study highlights the impact of lignin characteristics on subsequent conversion and alsoenhances our understanding of the complex depolymerization/hydrogenation mechanisms during lignin upgrading.