Light-emitting Diode Light Irradiation Research Articles

Increased Multiplexity in Optical Tissue Clearing-Based Three-Dimensional Immunofluorescence Microscopy of the Tumor Microenvironment by Light-Emitting Diode Photobleaching

Optical tissue clearing and three-dimensional (3D) immunofluorescence (IF) microscopy is transforming imaging of the complex tumor microenvironment (TME). However, current 3D IF microscopy has restricted multiplexity; only 3 or 4 cellular and noncellular TME components can be localized in cleared tumor tissue. Here we report a light-emitting diode (LED) photobleaching method and its application for 3D multiplexed optical mapping of the TME. We built a high-power LED light irradiation device and temperature-controlled chamber for completely bleaching fluorescent signals throughout optically cleared tumor tissues without compromise of tissue and protein antigen integrity. With newly developed tissue mounting and selected region-tracking methods, we established a cyclic workflow involving IF staining, tissue clearing, 3D confocal microscopy, and LED photobleaching. By registering microscope channel images generated through 3 work cycles, we produced 8-plex image data from individual 400 μm-thick tumor macrosections that visualize various vascular, immune, and cancer cells in the same TME at tissue-wide and cellular levels in 3D. Our method was also validated for quantitative 3D spatial analysis of cellular remodeling in the TME after immunotherapy. These results demonstrate that our LED photobleaching system and its workflow offer a novel approach to increase the multiplexing power of 3D IF microscopy for studying tumor heterogeneity and response to therapy.

(276) Light Emitting Diodes (LED) as a Potential Therapy for Erectile Function: A Preclinical Study in a Cavernous Nerve Injury Model

Abstract Introduction Erectile dysfunction (ED) induced by nerve injury including prostatectomy poorly responds to PDE5 inhibitor and requires invasive treatment. Light emitting diodes (LED) in some spectral range, is able to irradiate cells without overheating for its low energy consumption and to enhance mitochondrial metabolism, intracellular energy transfer, and thereby cell proliferation and tissue regeneration in some organs. We, herein, investigated whether and how LED therapy may improve penile erection in mouse cavernous nerve injury (CNI) - induced ED model Objective To identify the optimal LED parameters using molecular, histological, and erectile function analysis in cavernous nerve injury. Methods Eight week old male mice (n=120) were divided into 5 age-matched groups, a sham operation group receiving heat treatment, a CNI group receiving heat treatment, a CNI group receiving red light of LED (wavelength; 660 ±3% nm), a CNI group receiving near infrared light of LED (wavelength; 830 ±2% nm), and a CNI group receiving combination of both LED light. Mice were exposed to LED light for 30 minutes on the ventral side including penis for 5 consecutive days after CNI operation. Molecular study, histopathological analysis of the penis and erectile function test were done 2 weeks following the treatment in each subject. Results CNI group with heat treatment had much lower maximum and total ICP than sham control group. In contrast, three groups with LED light irradiation exhibited considerably improved maximum and total ICP, and the group with both LED treatments had the best erectile performance, reaching 90% of the sham surgery group. Histologically, mice treated with RED, NIR, or LED irradiation had more cavernous pericytes and endothelial cells than CNI mice after sham operation. In addition, all three CNI groups with various LED lengths improved neuroprotection and brain regeneration in CNI mice. All groups treated with LED showed increased expression of βIII-tubulin, neurofilament-1, and nNOS in cavernous tissue and dorsal nerve bundle. Additionally, LED treatment in three groups, particularly the combination group, significantly increased βIII-tubulin, S100, and myelin basic protein levels, indicating axonal integrity or expansion in the dorsal root and major pelvic ganglions. Molecular analysis of downstream signals of neural regeneration or angiogenesis showed that 3 groups with LED treatment increased phosphorylated PI3K, neurotrophic factors like BDNF, NGF, and NT-3, and angiogenic factors like angiopoietin1 and vascular endothelial growth factor in cavernous tissue and llpopolysaccharide-treated PC-12 cells. The TUNEL assay and BrdU staining of these tissue and cells showed lower cell apotosis and proliferation in LED-treated groups. Conclusions The results show that LED therapy with RED, NIR, preferably combination of each wavelength improves penile erection by neural progection or regeneration in cavernous nerve injury induced-ED. This noninvasive therapy may be useful in near future for ED refractory to PDE5 inhibitor. As far as we are aware, this is the first research to demonstrate the advantage of LED therapy, low level in sexual dyfunction field. Disclosure No.

Melatonin injection and red light irradiation affect the antioxidant response and cell damage in disk abalone (Haliotis discus hannai) exposed to high water temperatures.

The effects of red light-emitting diode (LED) light irradiation (630 nm, 0.5 W/m2) and melatonin (10-8 and 10-7 M) on oxidative stress and physiological responses in abalones exposed to high temperatures (28°C) were investigated. Changes in messenger RNA (mRNA) expressions of melatonin receptor (MT-R), heat shock protein 70 (HSP70), and antioxidant enzymes, as well as alterations in H2O2 levels in the hemolymph, were examined. The results revealed that high-temperature-stressed abalones treated with melatonin injections or exposed to red LED light showed a significant increase in MT-R mRNA expression, while HSP70 mRNA expression decreased. Notably, HSP70 mRNA expression levels in the red LED light-irradiated group were similar to those in the group injected with 10-8 M melatonin after 24 h exposure. Abalones treated with melatonin at 20°C or irradiated with red LED light exhibited decreased H2O2 levels and reduced antioxidant enzyme mRNA expression compared with those of the control group. However, the high-temperature environment induced oxidative stress in abalones, leading to increased antioxidant enzyme mRNA expression compared with that under 20°C conditions. Moreover, abalones exposed to high-temperature stress exhibited hepatopancreatic DNA damage, which was attenuated by melatonin treatment or red LED light irradiation. Hence, red LED light reduces oxidative stress, boosts antioxidant enzymes, and alleviates DNA damage in high-temperature-stressed abalones, akin to 10-8 M melatonin treatment. Therefore, considering the practical challenges of continuous melatonin administration to abalones, utilizing red LED light emerges as a practical, effective alternative to protect abalones from oxidative stress compared to 10-8 M melatonin treatment.

Decoupling photonic and thermal contributions for photoelectrochemical sensing of melatonin via graphene oxide nanoribbons

This work elucidates the photoelectrochemical (PEC) sensing of melatonin employing graphene oxide nanoribbons (GONRs) synthesized through a microwave-assisted method. GONRs served as electrocatalysts for screen-printed carbon electrodes (SPCE) to facilitate melatonin detection. We incorporated both a light-emitting diode (LED) and a solar simulator as light sources for PEC evaluations. Cyclic voltammetry revealed that the faradaic currents corresponding to melatonin oxidation on GONRs-modified SPCE were amplified under both LED and simulated solar light irradiation. Notably, the GONR (150 W) registered the most pronounced enhancement in the photo-assisted faradaic current and the highest conversion efficiency. Employing the solar simulator, certain thermal factor ratios concerning conversion efficiencies surpassed 50.0% at light intensities of both 80 mW/cm2 and 100 mW/cm2. Conversely, with the LED source, the thermal contribution remained below 15.0% of the total PEC faradaic current. We posit that obtaining conversion efficiencies devoid of thermal influences is pivotal for deepening our comprehension of PEC biosensing mechanisms.

Germination Characteristics and Seedling Growth of <italic>Pseudolysimachion nakaianum</italic> (Ohwi) T. Yamaz. Seeds According to Light Quality Type

Background and objective: This study was conducted to understand the effect of different quality of light-emitting diodes (LED) on the germination characteristics and growth of <i>Pseudolysimachion nakaianum</i>.Methods: The LED light irradiation was divided into white, red, blue, and red:blue (1:1). To investigate the germination characteristics, 30 seeds were placed in a Petri dish in three replicates for 8 days. Average germination rate, germination speed, germination uniformity, and average germination time were measured. To investigate the growth of seedlings, plant height, plant width, leaf length, leaf width, leaf number, fresh weight, dry weight and T/R ratio were examined 6 weeks after sowing, and chlorophyll fluorescence (maximum quantum yield, electron transport rate) was measured.Results: The final germination rate and germination speed were highest at red:blue (1:1) LED irradiation. Regarding growth and chlorophyll fluorescence measurements, red:blue LED showed the best growth results, with no significant difference in Fv/Fm between different types of light quality, and the electron transport rate was the highest under red:blue LED irradiation. Also, total fresh/dry weight and T/R ratio were highest for red:blue LED, it is presumed to promote the biomass of entire plant.Conclusion: The results proved that <i>Pseudolysimachion nakaianum</i> showed red LED conditions promoted germination, but cultivation under red:blue LED conditions is judged to be suitable for seedling growth and photosynthesis.

TiO2-Decorated by Nano-γ-Fe2O3 as a Catalyst for Efficient Photocatalytic Degradation of Orange G Dye under Eco-friendly White LED Irradiation.

Azo dyes make up a major class of dyes that have been widely studied for their diverse applications. In this study, we successfully applied nano-γ-Fe2O3/TiO2 as a nanocatalyst to improve the photodegradation efficiency of azo dyes (Orange G (OG) dye as a model) from aqueous solution under white light-emitting diode (LED) irradiation. We also investigated the degradation mechanisms and pathways of OG dye as well as the effects of the initial pH value, amount of H2O2, catalyst dosage, and dye concentration on the degradation processes. The characterizations of nano-γ-Fe2O3 and γ-Fe2O3 Nps/TiO2 were carried out using various techniques, including X-ray diffractometry, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and UV-visible spectroscopy. The efficiency of the photodegradation reaction of OG was found to follow pseudo-first-order kinetics (Langmuir-Hinshelwood model) with a rate constant of 0.0338 min-1 and an R2 of 0.9906. Scavenger experiments revealed that hydroxyl radicals and superoxide anion radicals were the dominant species in the OG photocatalytic oxidation mechanism. This work provides a new method for designing highly efficient heterostructure-based photocatalysts (γ-Fe2O3 Nps/TiO2) based on LED light irradiation for environmental applications.

One-pot solvothermal assembly of CeO2/Ce-BiOBr hollow microsphere heterojunctions for efficient degradation of Congo red driven by visible LED light irradiation

Morphology control and heterostructure construction are two essential aspects in designing and synthesizing photocatalysts. Herein, hollow microsphere heterojunctions of CeO2 and Ce3+ doped BiOBr (Ce-BiOBr) were fabricated adopting a facile one-pot solvothermal approach. Owing to the positively charged Ce species, the interlamellar repulsion can be reduced and the specific surface area of these microsphere can be increased. The as-generated Ce4+/Ce3+ redox centers can synergistically improve the transfer and separation efficiency of photogenerated carriers. When used to treat Congo red (CR), 0.1CBOB with a Ce/Bi molar ratio of 0.1:1 exhibits the best photodegradation efficiency (94.63%) and kinetic rate (0.01119 min−1) under visible light-emitting diode (LED) light irradiation, which are remarkably superior to pure BiOBr and CeO2. The results of radical capture experiment show that photogenerated hole (h+), superoxide radical (·O2−) are the main active species in the process of photocatalytic degradation.

Core/Shell Nitrogen-Doped TiO2@SiO2 Nano-Catalyst as an Additive in Photocatalytic Paint for Gaseous Acetaldehyde Decomposition

A nitrogen-doped TiO2@SiO2 core/shell nano-photocatalyst (N-TiO2@SiO2) was used as an additive in photocatalytic paint and applied for the photocatalytic degradation of gaseous acetaldehyde under light-emitting diode (LED) visible light irradiation. N-TiO2 was synthesised via the solvothermal method and then encapsulated by SiO2 via the sol-gel method. The incorporation of the N atom into the TiO2 structure was observed by X-ray photoelectron spectroscopy. The N-TiO2@SiO2 core/shell structure was determined by TEM images. The photodegradation of gaseous acetaldehyde using the prepared N-TiO2@SiO2 photocatalytic paint was examined in a closed chamber under LED light irradiation. The photodegradation of acetaldehyde by N-TiO2@SiO2 photocatalytic paint (31%) was significantly higher than that of TiO2 paint (5%) and N-TiO2 paint (20%) within 16 h. The chemical resistance and adhesion ability of N-TiO2@SiO2 photocatalytic paint were investigated following Thai Industrial Standards (TIS) no. 2321 and standard test methods for rating adhesion by tape test (ASTM D 3359-22). The N-TiO2@SiO2 paint showed good acid and alkali resistance, as well as high adhesion ability comparable with commercial paint (without a photocatalyst).

Feasibility study of a LED light irradiation device for the treatment of chronic neck with shoulder muscle pain/stiffness.

Neck with shoulder muscle stiffness/pain is a common disorder. Commonly used physical therapy, pharmacotherapy, acupuncture, and moxibustion only temporarily alleviate the disorder in most cases, thus the disorder often recurs. Low power laser therapy is often used for neck and shoulder stiffness/pain and has been effective in clinical trials. In this study, we evaluated the safety and effectiveness of a newly developed self-care device for disorders including neck with shoulder muscle stiffness/pain. The device incorporates light-emitting diodes (LEDs), which are safer than lasers, as its light source. Ten adults with neck with shoulder muscle stiffness/pain were subject to LED irradiation (wavelength 780 nm ± 15 nm, output 750 mW, power density 3.8 W/cm2, energy density 5.7×102 J/cm2) for 3 minutes on the affected shoulder at a standard acupuncture point (GB21, Jianjing). Immediately after irradiation, the subjective symptoms of the neck with shoulder muscle stiffness and pain evaluated by a visual analog scale were improved from 58.3 mm ± 18.7 mm to 45.5 mm ± 21.5 mm and from 45.8 mm ± 23.3 mm to 39.4 mm ± 21.8 mm, respectively. The symptoms further improved after 15 minutes of irradiation. The skin temperature at the irradiated point increased from 34.3°C ± 1.1°C to 41.0°C ± 0.7°C. The increase in skin temperature was observed within approximately 5 cm of the irradiated area. There was no effect on the heart rate variability, a measure of the autonomic nervous system; however, the baroreflex sensitivity was slightly increased. No irradiation-related adverse skin events were observed. Our LED irradiation device was found to be safe, and it improved the subjective symptoms of muscle stiff neck with shoulders.

A novel BODIPY-based nano-photosensitizer with aggregation-induced emission for cancer photodynamic therapy

The discovery of aggregation-induced emission (AIE) effect provides opportunities for the rapid development of fluorescence imaging-guided photodynamic therapy (PDT). In this work, a boron dipyrromethene (BODIPY)-based photosensitizer (ET-BDP-O) with AIE characteristics was developed, in which the two linear arms of BODIPY group were linked with triphenylamine to form an electron Donor–Acceptor–Donor (D–A–D) architecture while side chain was equipped with triethylene glycol group. ET-BDP-O was able to directly self-assemble into nanoparticles (NPs) without supplement of any other matrices or stabilizers due to its amphiphilic property. The as-prepared ET-BDP-O NPs had an excellent colloid stability with the size of 125 nm. Benefiting from the AIE property, ET-BDP-O NPs could generate strong fluorescence and reactive oxygen species under light-emitting diode light irradiation (60[Formula: see text]mW/cm[Formula: see text]. After internalized in cancer cells, ET-BDP-O NPs were able to emit bright red fluorescence signal for bioimaging. In addition, the cell viability assay demonstrated that the ET-BDP-O NPs exhibited excellent photo-cytotoxicity against cancer cells, while negligible cytotoxicity under dark environment. Thus, ET-BDP-O NPs might be regarded as a promising photosensitizer for fluorescence imaging-guided PDT in future.

Post-Harvest LED Light Irradiation Affects Firmness, Bioactive Substances, and Amino Acid Compositions in Chili Pepper (Capsicum annum L.).

Chili pepper is an important vegetable and spice crop with high post-harvest deteriorations in terms of commercial and nutritional quality. Light-emitting diodes (LEDs) are eco-friendly light sources with various light spectra that have been demonstrated to improve the shelf-life of various vegetables by manipulating light quality; however, little is known about their effects on the post-harvest nutritional quality of chili peppers. This study investigated the effects of different LED lightings on the post-harvest firmness and nutritional quality of chili peppers. We found that red and blue light could increase the content of capsaicinoids, whereas white and red light could increase the essential and aromatic amino acid (AA) content in pepper. Nonetheless, the influence of light treatments on AA contents and compositions depends strongly on the pepper genotype, which was reflected by total AA content, single AA content, essential AA ratio, delicious AA ratio, etc., that change under different light treatments. Additionally, light affected fruit firmness and the content of nutrients such as chlorophyll, vitamin C, and total carotenoids, to varying degrees, depending on pepper genotypes. Thus, our findings indicate that LED-light irradiation is an efficient and promising strategy for preserving or improving the post-harvest commercial and nutritional quality of pepper fruit.

LED light-induced enhanced photocatalytic hydrogen evolution on Au@TiO2 core–shell modified by nitrogen doping and reduced graphene oxide

This study focused on the large band gap of TiO2 for its use as a photocatalyst under light emitting diode (LED) light irradiation. The photocatalytic activities of core–shell structured Au@TiO2 nanoparticles (NPs), nitrogen doped Au@TiO2 NPs, and Au@TiO2/rGO nanocomposites (NCs) were investigated under various light intensities and sacrificial reagents. All the materials showed better photocatalytic activity under white LED light irradiation than under blue LED light. The N-doped core–shell structured Au@TiO2 NPs (Au@N–TiO2) and Au@TiO2/rGO NCs showed enhanced photocatalytic activity with an average H2 evolution rate of 9205 μmol h−1g−1 and 9815 μmol h−1g−1, respectively. All these materials showed an increasing rate of hydrogen evolution with increasing light intensity and catalyst loading. In addition, methanol was more suitable as a sacrificial reagent than lactic acid. The rate of hydrogen evolution increased with increasing methanol concentration up to 25% in DI water and decreased at higher concentrations. Overall, Au@TiO2 core–shell-based nanocomposites can be used as an improved photocatalyst in photocatalytic hydrogen production.

Photocatalytic degradation of bisphenol A on BiOI nanostructured films under visible LED light irradiation

Bismuth oxyiodide (BiOI) films were prepared through the Layer-by-Layer (LbL) method for the first time using powdery BiOI microstructures previously synthesized by a solvothermal method. BiOI films and powdery samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, and UV–vis diffuse reflectance spectroscopy. The chemical composition and morphology of the powdery BiOI microstructures was not affected by the deposition process. The photocatalytic activity of prepared BiOI films and powdery samples was evaluated in the degradation of bisphenol A under white LED (Light emitting diode) light irradiation. The BiOI film composed by 1 layer (BiOI-1) of BiOI flower-like microspheres exhibited the highest photocatalytic activity in comparison with BiOI as powder and BiOI films composed by 3 (BiOI-3) and 5 layers (BiOI-5). The probable reasons for the highest photocatalytic performance of BiOI-1 may be related to its larger surface area, morphological characteristics, and fractal geometry. The results obtained in this work demonstrate that the LbL method can be a suitable technique to fabricate BiOI films with photocatalytic properties for water treatment.

Porous Pyrene Organic Cage with Unusual Absorption Bathochromic-Shift Enables Visible Light Photocatalysis

Porous Pyrene Organic Cage with Unusual Absorption Bathochromic-Shift Enables Visible Light Photocatalysis

Anatase TiO2 decorated CuCr2O4 nanocomposite: A versatile photocatalyst under domestic LED light irradiation

The rutile and anatase polymorphs of TiO2 are the most extensively studied photocatalyst materials with the efficient absorption in the violet to near ultra violet region of the electromagnetic spectrum, which boost tremendous research endeavors in increasing the photocatalytic activity of TiO2 under visible light sources through rational modifications. Here, we report the astonishing performance of CuCr2O4(CCO)/anatase-TiO2 nanocomposite as a Fenton like catalyst with potential impact for sustainable design and environmental protection. All the materials were thoroughly characterized by several physico chemical techniques. CCO/TiO2 nanocomposite obtained by heat-treatment at 400 °C is found to exhibit high performance towards degradation of azo dyes like methylene blue (MB), rhodamine B (RhB) and methyl orange (MO), antibiotics like tetracycline hydrochloride and norfloxacine, and a promising Pt-free candidate for photoelectrocatalytic oxygen evolution reaction under domestic light emitting diode (LED) light irradiation. CCO/TiO2 shows high recycling activity and chemical stability. Under domestic visible LED light irradiation, the electrons are photoexcited from the conduction band of CCO to that of TiO2 resulting in enhanced charge separation eventually facilitating the catalytic performance of the nanocomposite. TiO2 plays two primordial roles, firstly, it acts as an electron receiver to improve the charge separation in the nanocomposite and secondly, it participates in the Fenton like reaction.

Visible Light-Induced Antibacterial Activity of Pigments Extracted from Dregs of Green and Black Teas.

Chlorophyll and its derivatives are potential natural sensitizers frequently applied in antimicrobial photodynamic therapy. Chlorophyll derivatives are formed naturally during tea processing, but they do not contribute to the color of tea infusions and thus are presumably left in the tea dregs. The present study aimed to investigate (i) the chlorophyll remnants in the pigments recovered from dregs of green and black teas and (ii) the antibacterial activity of pigments extracted from the tea dregs upon illumination using a light-emitting diode (LED) as the light source. Pigment analysis using high-performance liquid chromatography (HPLC) revealed the presence of main degradation products of chlorophylls, such as pheophytin and its epimers, pyropheophytin, and pheophorbides. In vitro assays demonstrated significant reductions in the number of viable bacteria in the presence of the pigments after 30 min of incubation with LED light irradiation. The descending order of bacterial susceptibility was Listeria monocytogenes > Staphylococcus aureus > Escherichia coli > Salmonella typhi. At an equivalent irradiation intensity, the blue and red LEDs could stimulate a comparable inactivation effect through photodynamic reactions. These findings demonstrated the valorization potential of tea dregs as a source of chlorophyll derivatives with visible light-induced antibacterial activity.

Sub-ppm-level organic dyes catalyzed reversible deactivation radical polymerization (RDRP) via in situ bromine-iodine exchange under LED light irradiation

A facial white light-emitting diode (LED) induced reversible deactivation radical polymerization (RDRP) of methacrylate monomers was successfully conducted by using sub-ppm-level organic dyes as organocatalysts. The organic dyes contained Eosin B (EB), Rose bengal (RB), Eosin Y (EY) and 3,3,5,5-Tetraiodophenolsulfonphthalein (TIPS) with the merits of metal free, non-toxic and inexpensive. The resulted poly (methacrylate) with controlled molecular weights and polydispersity indices were obtained either under white LED irradiation or green and blue LED. The polymerization of various functional methacrylates demonstrated that this polymerization system with dyes as organocatalysts had high monomer versatility. Chain extensions copolymerization verified the living features of reversible deactivation radical polymerization.

Facile synthesis of CuCr2O4/BiOBr nanocomposite and its photocatalytic activity towards RhB and tetracycline hydrochloride degradation under household visible LED light irradiation

Here we report the development of CuCr2O4/BiOBr nanocomposite photocatalysts for the first time to serve the purpose of rhodamine B (RhB) and tetracycline hydrochloride (TC-HCl) degradation using household visible light emitting diode (LED) light. In this nanocomposite, sol-gel combustion made spherical shaped CuCr2O4 nanoparticles are decorated on BiOBr plates in single pot via precipitation method using cetyltrimethylammonium bromide (CTAB) as the Br source as well as the template. The present investigation highlights a significant advancement to tackle the challenge of visible light induced photocatalytic degradation of harmful organic dye RhB and antibiotic-pollutant TC-HCl. The 20%CuCr2O4/BiOBr nanocomposite exhibits high degradation activity for both RhB (96.0% in 15 min) and TC-HCl (96.7% in 300 min) in presence of LED light with good recycling characteristics. Detailed structural and optical characterization using XRD, BET, FESEM, TEM, HRTEM, EDX, XPS, UV−Vis DRS, PL spectroscopy and Raman spectroscopy have been carried out prior performing photocatalytic activity tests. The structural as well as optical data have revealed a significant improvement in visible light absorption of BiOBr in presence of CuCr2O4. Based on energy band modification at the heterojunction of nanocomposite materials and their radical trapping ability, a plausible mechanistic path of photocatalytic degradation is presented.

Changes in Beneficial C-glycosylflavones and Policosanol Content in Wheat and Barley Sprouts Subjected to Differential LED Light Conditions.

The spectral quality and intensity of light, photoperiodism, and other environmental factors have profound impacts on the metabolic composition of light-dependent higher plants. Hence, we investigate the effects of fluorescent light (96 μmol m−2s−1) and white (100 μmol m−2s−1), blue (100 μmol m−2s−1), and red (93 μmol m−2s−1) light-emitting diode (LED) light irradiation on the C-glycosylflavone and policosanol contents in young seedlings of wheat and barley. Ultra-high-performance liquid chromatography (UHPLC) analyses of C-glycosylflavone contents in barley reveal that the saponarin content is significantly enhanced under blue LED light irradiation. Under similar conditions, isoorientin and isoschaftoside contents are improved in wheat seedlings. The contents of these C-glycosylflavones differed along with the light quality and growth period. The highest accumulation was observed in sprouts after three days under blue LED light irradiation. GC/MS analyses of policosanol contents showed that 1-hexacosanol (C26:o–OH) in barley and 1-octacosanol (C28:o–OH) in wheat seedlings were reduced under LED light irradiation, compared to seedlings under fluorescent light conditions. Nonetheless, the policosanol contents gradually improved with the extension of growth times and treatments, irrespective of the light quality. Additionally, a positive correlation was observed between the expression pattern of biosynthesis-related genes and the respective metabolite content in barley. This study demonstrates that blue LED light irradiation is useful in maximizing the C-glycosylflavone content in barley and wheat sprouts.

Photodynamic Activation of Cholecystokinin 1 Receptor with Different Genetically Encoded Protein Photosensitizers and from Varied Subcellular Sites.

Cholecystokinin 1 receptor (CCK1R) is activated by singlet oxygen (1O2) generated in photodynamic action with sulphonated aluminum phthalocyanine (SALPC) or genetically encoded protein photosensitizer (GEPP) KillerRed or mini singlet oxygen generator (miniSOG). A large number of GEPP with varied 1O2 quantum yields have appeared recently; therefore, in the present work, the efficacy of different GEPP to photodynamically activate CCK1R was examined, as monitored by Fura-2 calcium imaging. KillerRed, miniSOG, miniSOG2, singlet oxygen protein photosensitizer (SOPP), flavin-binding fluorescent protein from Methylobacterium radiotolerans with point mutation C71G (Mr4511C71G), and flavin-binding fluorescent protein from Dinoroseobacter shibae (DsFbFP) were expressed at the plasma membrane (PM) in AR4-2J cells, which express endogenous CCK1R. Light irradiation (KillerRed: white light 85.3 mW‧cm−2, 4’ and all others: LED 450 nm, 85 mW·cm−2, 1.5′) of GEPPPM-expressing AR4-2J was found to all trigger persistent calcium oscillations, a hallmark of permanent photodynamic CCK1R activation; DsFbFP was the least effective, due to poor expression. miniSOG was targeted to PM, mitochondria (MT) or lysosomes (LS) in AR4-2J in parallel experiments; LED light irradiation was found to all induce persistent calcium oscillations. In miniSOGPM-AR4-2J cells, light emitting diode (LED) light irradiation-induced calcium oscillations were readily inhibited by CCK1R antagonist devazepide 2 nM; miniSOGMT-AR4-2J cells were less susceptible, but miniSOGLS-AR4-2J cells were not inhibited. In conclusion, different GEPPPM could all photodynamically activate CCK1R. Intracellular GEPP photodynamic action may prove particularly suited to study intracellular GPCR.