Light-emitting Diode Illumination Research Articles

Effect of temperature on GaN-integrated optical transceiver chips

The gallium nitride (GaN) integrated optical transceiver chip based on multiple quantum wells (MQW) structure exhibits great promise in the fields of communication and sensing. In this Letter, the effect of ambient temperature on the performance of GaN-integrated optical transceiver chips including a blue MQW light-emitting diode (LED) and a MQW photodiode (PD) is comprehensively studied. Temperature-dependent light-emitting and current–voltage characteristics of the blue MQW LEDs are measured with the ambient temperature ranging from –70°C to 120°C. The experimental results reveal a decline in the electroluminescent (EL) intensity and an obvious redshift in the emission peak wavelength of the LED with increasing ambient temperature. The light detection performance of MQW PD under different temperatures is also measured with the illumination of an external blue MQW LED, indicating an enhancement in the PD sensitivity as the temperature rises. Finally, the temperature effect on the MQW PD under the illumination of the MQW LED on the GaN-integrated optical transceiver chip is characterized, and the PD photocurrent increases with higher ambient temperature. Furthermore, the measured temperature characteristics indicate that the GaN-integrated optical transceiver chip offers a promising application potential for optoelectronic temperature sensor.

Oxygen-enriching triphase platform for reliable sensing of femtomolar Alzheimer’s neurofilament lights

Accurate quantification of neurofilament lights (NfLs), a prognostic blood biomarker, is highly required to predict neurodegeneration in the presymptomatic stages of Alzheimer’s disease. Here, we report self-oxygen-enriching coral structures with triphase interfaces for the label-free photocathodic detection of NfLs in blood plasma with femtomolar sensitivities and high reliability. In conventional photocathodic immunoassays, the poor solubility and sluggish diffusion rate of the dissolved oxygen serving as electron acceptors have necessitated the incorporation of additional electron acceptors or aeration procedures. To address the challenge, we designed the coral-like copper bismuth oxides (CBO) with robust solid–liquid–air contact boundaries that enrich the interfacial oxygen levels without an external aeration source. By optimally assembling the perfluorododecyltrichlorosilane (FTCS) and platinum (Pt) co-catalysts into the silver-doped CBO (Ag:CBO), the stable solid–liquid–air contact boundaries were formed within the sensor interfaces, which allowed for the abundant supply of air phase oxygen through an air pocket connected to the atmosphere. The Pt/FTCS-Ag:CBO exhibited the stable background signals independent of the dissolved oxygen fluctuations and amplified photocurrent signals by 1.76-fold, which were attributed to the elevated interfacial oxygen levels and 11.15 times-lowered mass transport resistance. Under the illumination of white light-emitting diode, the oxygen-enriching photocathodic sensor composed of Pt/FTCS-Ag:CBO conjugated with NfLs-specific antibodies precisely quantified the NfLs in plasma with a low coefficient of variation (≤2.97%), a high degree of recovery (>97.0%), and a limit of detection of 40.38 fg/mL, which was 140 times lower than the typical photocathodic sensor with diphase interfaces.

Effectiveness of light-emitting diodes for arsenic and mercury accumulation by Ceratophyllum demersum L.: An innovative advancement in phytoremediation technology

Light Emitting Diodes (LEDs) have emerged as a tool with great potential in the field of phytoremediation, offering a novel approach to enhance the efficiency of plant-based remediation techniques. In this work investigated the influence of LEDs on the phytoremediation of arsenic (As) and mercury (Hg) by Ceratophyllum demersum L., propagated using tissue culture methods. In addition, the biochemical properties of the plants exposed to metal toxicity were examined. Phytoremediation experiments employed concentrations of As (0.01–1.0 mg/L) and Hg (0.002–0.2 mg/L), with application periods set at 1, 7, 14, and 21 days. In addition to white, red and blue LEDs, white fluorescent light was used for control purposes in the investigations. A positive correlation was observed between higher metal concentrations, extended exposure times, and increased metal accumulation in the plants. Red LED light yielded the highest level of heavy metal accumulation, while white fluorescent light resulted in the lowest accumulation level. Examination of the biochemical parameters of the plants, including photosynthetic pigment levels, protein quantities, and lipid peroxidation, revealed a pronouncedly enhanced performance in specimens subjected to red and blue LED illumination, surpassing outcomes observed in other light treatments. The findings of this study introduce innovative avenues for the effective utilization of red and blue LED lights in the realm of phytoremediation research. Thus, the interaction between LEDs, tissue culture, and the phytoremediation process could lead to synergistic effects that contribute to more effective and sustainable remediation strategies.

A simply prepared amine oxide molecule as a low work function cathode modifier in organic photovoltaics for harvesting ambient light

Organic photovoltaics (OPV) that possibly convert ambient lights to electric energy are under the spotlight as a power supplier for portable, wearable, and Internet of Things devices. In order to enable the commercialization of ambient light harvesters, it is imperative to design and synthesize device components that offer cost-effectiveness, uniform deposition, and efficient charge extraction/collection. Here, we introduce a simple cathode interlayer (CIL) named EtNO for OPV-based ambient light harvesters. EtNO is designed with a chemical structure that does not require complicated conjugated units and is synthesized through a one-step procedure. EtNO CIL shows efficient reductions in the work function of electrodes, attributed to an interfacial dipole induced from an interaction between amine oxide group of EtNO and electrodes. Furthermore, EtNO forms a uniform layer through solution-processing without deteriorative effects on the surface of photoactive layer in OPVs. Therefore, the OPV with EtNO CIL exhibits an improved performance with an output power density of 79.2 μW cm–2 under light emitting diode illumination (1000 lx, 254 μW cm–2) compared to the device with conventional PDINO CIL (73.1 μW cm–2). Studies conducted on OPVs under halogen light illumination and on large-area devices further demonstrate the significant potential of EtNO as a CIL.

Suppressed Phase Segregation with Small A-Site and Large X-Site Incorporation for Photostable Wide-Bandgap Perovskite Solar Cells.

Wide-bandgap (WBG) perovskite solar cells (PSCs) have been widely used as the top cell of tandem solar cells. However, photoinduced phase segregation and high open-circuit voltage loss pose significant obstacles to the development of WBG PSCs. Here, a two-step small-size A-site and large-size X-site incorporation strategy is reported to modulate the lattice distortion and improve the film quality of WBG formamidinium-methylammonium (FAMA) perovskite films for photostable PSCs based on two-step deposition method. First, CsI with content of 0-20% is introduced to tune the lattice distortion and film quality of FAMA perovskite with a bandgap of 1.70eV. Then, 4% RbI is incorporated to further modulate the perovskite growth and lattice distortion, leading to the suppression of photoinduced phase segregation in the resultant RbCsFAMA quadruple cation perovskites. As a result, the 20%CsI/4%RbI-doped device obtains a promising efficiency of 20.6%, and the corresponding perovskite film shows good photothermal stability. Even without encapsulation, the device can maintain 92% of its initial efficiency after 1000 h of continuous operation under 1 sun equivalent white light-emitting diode illumination.

Ocular accommodation and wavelength: The effect of longitudinal chromatic aberration on the stimulus-response curve.

The longitudinal chromatic aberration (LCA) of the eye creates a chromatic blur on the retina that is an important cue for accommodation. Although this mechanism can work optimally in broadband illuminants such as daylight, it is not clear how the system responds to the narrowband illuminants used by many modern displays. Here, we measured pupil and accommodative responses as well as visual acuity under narrowband light-emitting diode (LED) illuminants of different peak wavelengths. Observers were able to accommodate under narrowband light and compensate for the LCA of the eye, with no difference in the variability of the steady-state accommodation response between narrowband and broadband illuminants. Intriguingly, our subjects compensated more fully for LCA at nearer distances. That is, the difference in accommodation to different wavelengths became larger when the object was placed nearer the observer, causing the slope of the accommodation response curve to become shallower for shorter wavelengths and steeper for longer ones. Within the accommodative range of observers, accommodative errors were small and visual acuity normal. When comparing between illuminants, when accommodation was accurate, visual acuity was worst for blue narrowband light. This cannot be due to the sparser spacing for S-cones, as our stimuli had equal luminance and thus activated LM-cones roughly equally. It is likely because ocular LCA changes more rapidly at shorter wavelength and so the finite spectral bandwidth of LEDs corresponds to a greater dioptric range at shorter wavelengths. This effect disappears for larger accommodative errors, due to the increased depth of focus of the eye.

Formulation of Hierarchical Nanowire-Structured CoNiO2 and MoS2/CoNiO2 Hybrid Composite Electrodes for Supercapacitor Applications.

Hierarchical porous nanowire-like MoS2/CoNiO2 nanohybrids were synthesized via the hydrothermal process. CoNiO2 nanowires were selected due to the edge site, high surface/volume ratio, and superior electrochemical characteristics as the porous backbone for decoration of layered MoS2 nanoflakes to construct innovative structure hierarchical three-dimensional (3D) porous NWs MoS2/CoNiO2 hybrids with excellent charge accumulation and efficient ion transport capabilities. Physicochemical analyses were conducted on the developed hybrid composite, revealing conclusive evidence that the CoNiO2 nanowires have been securely anchored onto the surface of the MoS2 nanoflake array. The electrochemical results strongly proved the benefit of the hierarchical 3D porous MoS2/CoNiO2 hybrid structure for the charge storage kinetics. The synergistic characteristics arising from the MoS2/CoNiO2 composite yielded a notably high specific capacitance of 1340 F/g at a current density of 0.5 A/g. Furthermore, the material exhibited sustained cycling stability, retaining 95.6% of its initial capacitance after 10 000 long cycles. The asymmetric device comprising porous MoS2/CoNiO2//activated carbon encompassed outstanding energy density (93.02 Wh/kg at 0.85 kW/kg) and cycling stability (94.1% capacitance retention after 10 000 cycles). Additionally, the successful illumination of light-emitting diodes underscores the significant potential of the synthesized MoS2/CoNiO2 (2D/1D) hybrid for practical high-energy storage applications.

Investigating the Photostability of Organic Photovoltaics for Indoor and Outdoor Applications

Organic photovoltaics (OPVs) show great promise for both outdoor and indoor applications. However, there remains a lack of understanding around the stability of OPVs, particularly for indoor applications. In this work, the photostability of the poly[(thiophene)‐alt‐(6,7‐difluoro‐2‐(2‐hexyldecyloxy)quinoxaline)]:2,2′‐((2Z,2′Z)‐((4,4,9,9‐tetrahexyl‐4,9‐dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐2,7‐diyl)bis(methanylylidene))bis(3‐oxo‐2,3‐dihydro‐1H‐indene‐2,1‐diylidene))dimalononitrile blend is investigated for both outdoor and indoor applications. Photostability is found to vary drastically with illumination intensity. Devices under high‐intensity white light‐emitting diode (LED) illumination, with their short‐circuit current density (JSC) matching JSC–EQE for AM1.5 G illumination, lose 42% of their initial performance after 30 days of illumination. Contrastingly, after almost 47 days of illumination devices under 1000 lux white LED illumination show no loss in performance. The poor photostability under 1 sun illumination is linked to the poor photostability of IDIC. Through Raman spectroscopy and mass spectrometry, IDIC is found to suffer from photoisomerization, which detrimentally impacts light absorption and carrier extraction. In this work, it is highlighted that under low light levels, the requirement of intrinsic material photostability may be less stringent.

Improved postharvest quality attributes of sweet and sour cherry by using low pressure UVC versus light-emitting diodes (LEDs)

The aim of this study was to evaluate the effects of LPUVC253.7 nm and LEDs405.5 nm light on sweet and sour cherries, to assess the potential of post-harvest illumination for fruit shelf-life and quality extension. Fresh cherries were treated at several doses (up to 1.56 kJ m−2) in a lab design chamber. Microbiological parameters, total phenolic content, antioxidant activity, and quality properties such as weight loss, color, pH, and total soluble solids content, were assessed before and after illumination and during storage time up to 24 days at 4 and 25 °C. Studies on inactivation of natural fruit microbiota and artificially inoculated potential spoilage bacteria Pseudomonas syringae and Aureobasidium pullulans were performed. A maximum reduction of 1.89 and 1.66 log on total aerobic mesophilic bacteria and total mold and yeasts was obtained after light illumination at 253.7 nm on spiked cherry fruits. Regarding fruit quality properties, both light (LPUVC253.7 nm and LEDs405.5 nm) illumination caused no change (p > 0.05) in quality parameters compared with non-treated fruits.Industrial relevance: There is an increasing global demand from consumers for agricultural products high nutritional quality with no or minimal chemical preservatives. Postharvest physical ultraviolet-C (UVC) treatment before or during cold storage can inactivate microbial contaminants, alleviate low-temperature damage, reduce postharvest decay, and extend shelf life of fruits while improving chemical safety. The present study indicated that post-harvest LPUVC and LEDs illumination of cherries can be used as a clean and environmental forthcoming process to extend the shelf-life of fruits with highly preserved quality.

Chronic blue light-emitting diode exposure harvests gut dysbiosis related to cholesterol dysregulation.

Night shift workers have been associated with circadian dysregulation and metabolic disorders, which are tightly coevolved with gut microbiota. The chronic impacts of light-emitting diode (LED) lighting at night on gut microbiota and serum lipids were investigated. Male C57BL/6 mice were exposed to blue or white LED lighting at Zeitgeber time 13.5-14 (ZT; ZT0 is the onset of "lights on" and ZT12 is the "lights off" onset under 12-hour light, 12-hour dark schedule). After 33 weeks, only the high irradiance (7.2 J/cm2) of blue LED light reduced the alpha diversity of gut microbiota. The high irradiance of white LED light and the low irradiance (3.6 J/cm2) of both lights did not change microbial alpha diversity. However, the low irradiance, but not the high one, of both blue and white LED illuminations significantly increased serum total cholesterol (TCHO), but not triglyceride (TG). There was no significant difference of microbial abundance between two lights. The ratio of beneficial to harmful bacteria decreased at a low irradiance but increased at a high irradiance of blue light. Notably, this ratio was negatively correlated with serum TCHO but positively correlated with bile acid biosynthesis pathway. Therefore, chronic blue LED lighting at a high irradiance may harvest gut dysbiosis in association with decreased alpha diversity and the ratio of beneficial to harmful bacteria to specifically dysregulates TCHO metabolism in mice. Night shift workers are recommended to be avoid of blue LED lighting for a long and lasting time.

Optogenetic Stimulation of the Cardiac Vagus Nerve to Promote Heart Regenerative Repair after Myocardial Infarction.

Background: It had been shown that selective cardiac vagal activation holds great potential for heart regeneration. Optogenetics has clinical translation potential as a novel means of modulating targeted neurons. This study aimed to investigate whether cardiac vagal activation via optogenetics could improve heart regenerative repair after myocardial infarction (MI) and to identify the underlying mechanism. Methods: We used an adeno-associated virus (AAV) as the vector to deliver ChR2, a light-sensitive protein, to the left nodose ganglion (LNG). To assess the effects of the cardiac vagus nerve on cardiomyocyte (CM) proliferation and myocardial regeneration in vivo, the light-emitting diode illumination (470 nm) was applied for optogenetic stimulation to perform the gain-of-function experiment and the vagotomy was used as a loss-of-function assay. Finally, sequencing data and molecular biology experiments were analyzed to determine the possible mechanisms by which the cardiac vagus nerve affects myocardial regenerative repair after MI. Results: Absence of cardiac surface vagus nerve after MI was more common in adult hearts with low proliferative capacity, causing a poor prognosis. Gain- and loss-of-function experiments further demonstrated that optogenetic stimulation of the cardiac vagus nerve positively regulated cardiomyocyte (CM) proliferation and myocardial regeneration in vivo. More importantly, optogenetic stimulation attenuated ventricular remodeling and improved cardiac function after MI. Further analysis of sequencing results and flow cytometry revealed that cardiac vagal stimulation activated the IL-10/STAT3 pathway and promoted the polarization of cardiac macrophages to the M2 type, resulting in beneficial cardiac regenerative repair after MI. Conclusions: Targeting the cardiac vagus nerve by optogenetic stimulation induced macrophage M2 polarization by activating the IL-10/STAT3 signaling pathway, which obviously optimized the regenerative microenvironment and then improved cardiac function after MI.

Design of a high-power collimating optical system based on Fresnel lenses.

In light-emitting diode (LED) illumination (e.g., LED maritime lighting for ships), creating a uniform light environment for optical systems is an important challenge. In this study, we present a high-power collimating system based on Fresnel lenses, which allows high-brightness LED illumination in the earlier-mentioned remote distance. The work presented in this article focuses on improving the power, compacting the optical structure, and promoting the brightness of the spot. To prove the claims, the system with a total power of 1 kW is designed. The system consists of a 27 W LED array, a freeform surface lens array, and a confocal Fresnel lens array. In comparison with the traditional optical system, the optical structure shortens from 390 to 120 mm, and the divergent angle decreases from 3° to 2 . Meanwhile, the illuminance of the system is obtained as high as 230 lx at the near field of 200 m and 3.0lx at the far field of 1.5 nautical miles. This new method provides a practical and effective way to solve the problem of low power, insufficient illuminance, and long optical structure for LED array illumination, which is suitable for remote illumination and guidance of ships.

Technological mapping of led lighting for microalgae: a survey of patent deposits

Microalgae are a significant focus in bioprocess research due to their capacity to capture atmospheric CO2 and produce valuable secondary metabolites. Light-emitting diodes (LEDs) have gained prominence as a light source for microalgae, offering advantages over traditional lighting due to their narrowband spectrum, along with many advantages in comparison to traditional light sources. This study examines 578 patent families related to microalgae processes with LED illumination, assessing light spectrum, microalgae species, and bioproduct yield, as well as their connection to current scientific literature. The patent analysis was conducted using Orbit Intelligence® software, and scientific research was validated using the Elsevier Scopus® database, meeting specified search criteria. Both technological and scientific advancements have occurred over the past decade. Over the last two decades, the majority of patent activity has been centered in Asia, with China leading with 333 patent filings, followed by South Korea (96) and the USA (45). However, the scientific publication landscape tells a different story, with the USA leading in publications (1693), followed by China (771), and Germany (713). Most patents relate to microalgae cultivation systems. The primary microalgae species featured in the patents include Chlorella, Arthrospira (Spirulina), and Haematococcus, with biodiesel being the most prominent bioproduct. Regarding LED light quality, the patents predominantly utilize a combination of red and blue lights in various ratios. In summary, the adoption of LED lighting in microalgae production has grown significantly in both the industrial and scientific sectors. Tailoring light emissions in microalgae cultivation proves to be a smart and cost-effective method for enhancing efficiency, and this trend is expected to continue expanding in the future.

Exploring the potential of Sm3+-doped Sr2B2O5 phosphors for bridging the amber gap in w-LED application

A series of orange-red emitting Sr2(1-x)B2O5:2xSm3+(x = 0.5–3.0 mol%) phosphors have been synthesized via the self-propagating low-cost solution combustion method. The purpose of this study is to address the amber gap in light-emitting diodes (LEDs). X-ray diffraction technique was employed for structural analysis, which reveals the creation of a purely monoclinic phase having space group P21/a. The optical characteristics of synthesized Sr2B2O5:Sm3+ phosphor were investigated via Photoluminescence (PL) and UV–Vis spectroscopy. The findings of the PL studies indicate that the phosphors doped with Sm3+ ions exhibit distinct emission peaks at 565 nm, 604 nm, 649 nm, and 712 nm when excited by a wavelength of 404 nm. These peaks are ascribed to electronic transitions from 4G5/2 to 6HJ (J = 5/2, 7/2, 9/2, 11/2) energy levels. The temperature-dependent PL studies suggest that the synthesized phosphors display a remarkable thermal stability of 96.1 % and 90 % at 150 ℃ and 200 ℃, respectively. The Diffused Reflectance Spectrum was utilized to estimate the optical band gap energy. The CIE coordinates (0.6, 0.39) for the phosphors were found to be in the orange-red region exhibiting a towering color purity of 98.6 %. The aforementioned findings demonstrate the prepared phosphors will be an auspicious candidate for amber LEDs for automotive illumination.

Overlapping speckle correlation algorithm for high-resolution imaging and tracking of objects in unknown scattering media

Optical imaging in scattering media is important to many fields but remains challenging. Recent methods have focused on imaging through thin scattering layers or thicker scattering media with prior knowledge of the sample, but this still limits practical applications. Here, we report an imaging method named ‘speckle kinetography’ that enables high-resolution imaging in unknown scattering media with thicknesses up to about 6 transport mean free paths. Speckle kinetography non-invasively records a series of incoherent speckle images accompanied by object motion and the inherently retained object information is extracted through an overlapping speckle correlation algorithm to construct the object’s autocorrelation for imaging. Under single-colour light-emitting diode, white light, and fluorescence illumination, we experimentally demonstrate 1 μm resolution imaging and tracking of objects moving in scattering samples, while reducing the requirements for prior knowledge. We anticipate this method will enable imaging in currently inaccessible scenarios.

Tunable luminescence spectra of solid solution phosphors Gd3(Sb1-yTay)O7:Bi3+ for ultrahigh color rendering index full-spectrum white light-emitting diodes

The development of efficient luminescent materials that can compensate for the cyan gap is essential for actualizing high-quality full-spectrum white light-emitting diode (wLED) illumination. In this paper, a novel blue-emitting phosphor Gd3SbO7:Bi3+ was synthesized with an emission center located at 449 nm. Based on the cation substitution strategy, the cyan-emitting Gd3TaO7:Bi3+ phosphor is developed by completely replacing Sb5+ ions with Ta5+ ions in Gd3SbO7:Bi3+. Compared with Gd3SbO7:Bi3+, Gd3TaO7:Bi3+ also has an orthorhombic phase with the space group Ccmm, except that its emission wavelength is red-shifted by 45 nm from 449 to 494 nm, and the luminescence color is changed from blue to cyan. Thermal stability measurements demonstrate the negative effect of increasing Ta5+ doping concentration on the thermal stability of Gd3SbO7:Bi3+ phosphors. And a full-spectrum wLED device was fabricated using Gd3SbO7:Bi3+, Gd3TaO7:Bi3+, commercial (Sr, Ba)2SiO4:Eu2+ and CaAlSiN3:Eu2+ phosphors, with an impressive color rendering index (Ra = 94.7, R9 = 93) and suitable correlated color temperature (5832 K). The research results demonstrate the important role of Gd3TaO7:Bi3+ phosphors in compensating the cyan gap, and also provide new insights into the application of cyan phosphors in full-spectrum white light illumination.

Color Rendering Index over 95 Achieved by Using Light Recycling Process Based on Hybrid Remote-Type Red Quantum-Dot Components Applied to Conventional LED Lighting Devices.

Red color conversion materials have often been used in conventional white LEDs (light-emitting diodes) to enhance the insufficient deep-red component and thus improve the color-rendering property. Quantum dots (QDs) are one of the candidates for this due to their flexibility in controlling the emission wavelength, which is attributed to the quantum confinement effect. Two types of remote QD components, i.e., QD films and QD caps, were prepared and applied to conventional white LED illumination to improve the color-rendering properties. Thanks to the red component near 630 nm caused by the QD components, the color rendering indices (CRIs) of both Ra and R9 could be increased to over 95. It was found that both the diffusing nature of the reflector and the light recycling process in the vertical cavity between the bottom reflector and the top optical films play important roles in improving the color conversion efficiency of remote QD components. The present study showed that the proper application of remote QDs combined with a suitable optical cavity can control the correlated color temperature of the illumination over a wide range, thus realizing different color appearances of white LED illumination. In addition, a high CRI of over 95 could be achieved due to the sufficient excitation from fewer QDs, due to the strong optical cavity effect.

Over 23% Efficiency Under Indoor Light in Gallium-Doped Zinc Oxide Electron-Transport-Layer-Based Inverted Organic Solar Cell to Power IoT Devices

Inverted structured organic solar cells (OSCs) have recently attracted attention due to their greater stability and performance above conventional structured OSCs. Consequently, under indoor lighting, OSCs have excellent power conversion efficiency (PCE). Indoor OSC may be a useful power source for a variety of electrical devices connected to the Internet of Things network. An inverted structured OSC, the electron transport layer (ETL) is crucial. Inverted OSCs have been constructed with variety of metal oxides based ETL. Zinc oxide (ZnO) is one of the best options among them because of its high transparency and stability, but its lower electron mobility is the key reason for the ZnO ETL-based inverted OSCs’ lower PCE. Moreover, very few studies have been conducted on the application of inverted structured OSCs for indoor light harvesting. We fabricate ZnO and gallium (Ga)-doped ZnO (GZO) ETL-based inverted structured OSCs with an poly (2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo1,2-b:4,5-b’dithiophene))-alt-(5,5-(1’,3’-di-2-thienyl-5’,7’-bis(2-ethylhexyl)benzo1’,2’-c:4’,5’-c’dithiophene-4,8-dione):6,6-phenyl-C71-butyric acid methyl ester (PBDB-T:PC70BM) active layer and evaluate them using a light-emitting diode (LED) (1000 lx). To optimize the doping concentration, we have varied the concentration of Ga in the GZO. The findings demonstrate that only by doping the ETL of the inverted structured OSC, the PCE may be significantly enhanced. Under a 1000 lx LED illumination, the device using undoped ZnO as the ETL shows a maximum of 15.56% PCE. The OSC with Ga-doped ZnO as the ETL with an optimized concentration of Ga (2 at.%) exhibits a maximum of 23.42% PCE under a 1000 lx LED.

Experimental demonstration of half-duplex underwater wireless optical communication when light emitting diode illumination noise exists

Experimental demonstration of half-duplex underwater wireless optical communication when light emitting diode illumination noise exists

Biochemical and functional characteristics of stored (double-dose) buffy-coat platelet concentrates treated with amotosalen and a prototype UVA light-emitting diode illuminator.

Pathogen reduction of platelet concentrates (PCs) using amotosalen and broad-spectrum UVA illumination contributes to the safety of platelet transfusion by reducing the risk of transfusion-transmitted infections. We evaluated the in vitro quality of stored buffy-coat (BC) PCs treated with amotosalen and a prototype light-emitting diode (LED) illuminator. Double-dose BC-PCs collected into PAS-III/plasma or SSP+ /plasma (55/45%) were treated with amotosalen in combination with either conventional UVA lamps (INT100 Illuminator 320-400 nm) or LED illuminators at 350 nm. Platelet quality and function were evaluated over 7 days. Platelet counts were conserved during storage in all groups, as was platelet swirling without appearance of macroscopic aggregates. Integrin αIIbβ3 and glycoprotein (GP) VI expression remained stable, whereas GPIbα and GPV declined similarly in all groups. UV lamp- and LED-treated PCs displayed similar glucose consumption, lactate generation, and pH variation. Comparable spontaneous and residual P-selectin and phosphatidylserine exposure, activated αIIbβ3 exposure, mitochondrial membrane potential, lactate dehydrogenase release, and adhesive properties under flow conditions were observed during storage. The use of SSP+ /plasma compared with PAS-III/plasma better preserved most of these parameters, especially during late storage, irrespective of the type of illuminator. Replacing the UVA lamp for photochemical treatment by LED illuminators had no impact on platelet metabolism, spontaneous activation, apoptosis or viability, or on the in vitro function of BC-PCs stored for 7 days in SSP+ or PAS-III/plasma. These findings support improved procedures for the pathogen reduction and storage of PCs, to ensure transfusion safety and retention of platelet functional properties.