Ligand Density Research Articles

Enhanced Molecular Imaging through a Versatile Peptide Nanofiber for Self-assembly and Precise Recognition.

Designing molecules for multivalent targeting of specific disease markers can enhance binding stability which is critical in molecular imaging and targeted therapy. Through rational molecular design, the nanostructures formed by self-assembly of targeting peptides are expected to achieve multivalent targeting by increasing the density of recognition ligands. However, the balance between targeting peptide self-assembly and molecular recognition remains elusive. In this study, we designed a targeting-peptide-based imaging probe system TAP which consist of the signal unit, the recognition motif, the assembly motif and a Pro-leverage. It is verified that TAP could specifically binds to PD-L1-positive tumor cells in a multivalent manner to produce biological effects, and could also be combined with imaging probes through unique self-assembly strategies. By the balance between the peptide self-assembly and targeting recognition, the specificity and stability can be improved while the accumulation capacity of the probes at the tumor site can be greatly enhanced compared with the conventional strategy, thus reducing side effects, providing an effective tool for diagnostic and therapeutic integration of tumors.

MMP2 enzyme-responsive extracellular vesicles as dual-targeted carriers to promote the phagocytosis of macrophages

Combination therapy using inhibition of tumor cell escape and alteration of the tumor microenvironment offers a new strategy for cancer treatment. This study aimed to develop an extracellular vesicle (EV) carrier that regulates tumor cells and the tumor microenvironment to achieve efficient tumor immunotherapy. The ligand modified on carriers targets the immune checkpoint CD47 protein, blocking tumor cell escape. This ligand is cleaved by the MMP2 enzyme and assembles into nanofibers, extending the retention time in the tumor. The carriers target the CD206 protein, enabling efficient uptake by M2 macrophages. Carriers with a high density of ligands (anti-CD206) exhibit strong receptorligand interactions with tumor cells. Due to their high rigidity, these EVs have difficulty deforming during the transmembrane process, reducing resistance and resulting in low uptake efficiency by M2 cells. The optimal uptake efficiency by M2 macrophages is achieved when the mass ratio of ligand to EVs is 1:25. Crocin loaded in EVs facilitates the polarization of M2 macrophages into M1 cells, which can phagocytize tumor cells. This study reveals a potential strategy for using extracellular vesicles in tumor treatment.

Electric-field assisted silicon nanowire field effect transistor for the ultra-low concentration nucleic acid detection

Ultra-low concentration nucleic acid detection is crucial for disease diagnosis and prognosis. Silicon nanowire field-effect transistors (SiNW FETs) are promising due to their sensitivity, real-time capabilities, and compact design. A critical consideration for FETs is the reaction time required for nucleic acid diffusion to the detection surface, especially at low concentrations. This study utilizes polycrystalline silicon nanowire FETs (poly-SiNW FETs) as biosensors, employing a negative voltage on the liquid gate used for detection to create an electric field. This field accelerates nucleic acid diffusion towards the sensor surface to interact with immobilized probes. We adjusted the gate voltages and target solution injection flow rates to identify optimal parameters for nucleic acid detection and how the electrical field accelerates hybridization kinetics. We varied the probe immobilization times to show that higher ligand density accelerates the interaction with the immobilized probe. The study demonstrated stable diffusion of target DNA by combining FET with an electric field of −1 V and a slow injection flow rate, reducing the equilibrium time from 60 to 20 min. Additional improvement was achieved by enhancing probe immobilization density and applying an electric field, resulting in a faster probe-target hybridization reaction rate. These efforts significantly improved the signal to maintain superior performance and reduced the time required to reach equilibrium. This research pioneers using an external electric field to expedite detection time in field-effect transistors, demonstrating the potential for accelerated nucleic acid detection in nanowire FETs.

Engineering Nanoclusters of Cell Adhesive Ligands on Biomaterial Surfaces: Superior Cell Proliferation and Myotube Formation for Skeletal Muscle Tissue Regeneration.

Engineering biointerfaces with nanoscale clustering of integrin-binding cell adhesive peptides is critical for promoting receptor redistribution into signaling complexes. Skeletal muscle cells are exquisitely sensitive to integrin-mediated signaling, yet biomaterials supporting myogenesis through control of the density and nanodistribution of ligands have not been developed. Here, materials are developed with tailorable cell adhesive ligands distribution at the interface by independently controlling their global and local density to enhance myogenesis, by promoting myoblast growth and myotube formation. To this end, RGD-functionalized low-fouling polymer surfaces with global ligand densities (G) from 0-7µg peptide/mg polymer and average local ligand densities (L) from 1-6.3 ligands/cluster, are generated and characterized. Cell studies demonstrate improvements in cell adhesion, spreading, growth, and myotube formation up to a density of 7µg peptide/mg polymer with 4 ligands/cluster. Optimizing ligand density and distribution also promotes early myofiber maturation, identified by increased MF20 marker protein expression and sarcomere-forming myotubes. At higher ligand densities, these cell properties are decreased, indicating that ligand multivalency is a critical parameter for tailoring cell-material interactions, to a certain threshold. The findings provide new insights for designing next-generation biomaterials and hold promise for improved engineering of skeletal muscle.

X-Type Ligands Effect on the Operational Stability of Heavy-Metal-Free Quantum Dot Light-Emitting Diodes.

ZnSeTe quantum dots (QDs) offer an efficient avenue for realizing heavy-metal-free light-emitting diodes (LEDs) that meet the Rec.2100 blue standard. Synthetic core-shell engineering has enabled big advances in the external quantum efficiency (EQE) of ZnSeTe QD-LEDs. However, the mechanisms behind the degradation of the operational stability of ZnSeTe QD-LEDs remain relatively unexplored. In this study, we explore the impact of ligand density and composition on both material and device stability. We developed a solid-film ligand exchange utilizing an inorganic X-type ligand (zinc chloride), revealing that the substitution of inorganic ligands for organic counterparts significantly influences the stability of both materials and devices.

Deciphering Surface Ligand Density of Colloidal Semiconductor Nanocrystals: Shape Matters.

Surface chemistry of colloidal semiconductor nanocrystals (NCs) is of paramount importance because it profoundly impacts their physical and chemical properties, processing, and performance. Herein, we report the effect of the shape of ZnS NCs in terms of nanodots, nanorods, and nanoplatelets (NPL) on the surface ligand density (LD) of the commonly used oleylamine (OLA) ligand by combining three experimental quantification techniques (e.g., thermogravimetric analysis-differential scanning calorimetry, 1H nuclear magnetic resonance spectroscopy, and inductively coupled plasma-optical emission spectrometry) with the semiempirical molecular dynamics (MD) simulations. Consistent results on the surface LD derived by the aforementioned three independent techniques were obtained, presenting an ascending order of LDdots < LDrods < LDNPLs. MD simulations reveal that the highest LD for ZnS NPLs can be attributed to their extremely flat and uniform surfaces with regular distribution of surface Zn atoms for the OLA molecules to achieve parallel and tight stacking, while for ZnS nanodots and nanorods, their surfaces may have staggered arrangement and multisteps, making it unlikely for the OLA ligand to adopt the tight ligand stacking mode. The finding revealed in this work not only sheds light on the constitution of the molecule ligand shell of NCs, which is helpful for their rational morphology control, but also provides an additional and important knob for tuning their chemical functionality.

Intrinsic Synergy and Selectivity for the Inhibition of Cancer Cell Growth Generated by a Polymer Ligand of Proximal Enzymes.

A fundamental understanding of the design of polymer ligands of proximal enzymes is essential for the precise targeting of cancer cells, but it is still in its infancy. In this study, we systematically investigated the contribution of the chain length, ligand density, and ligand ratio of proximal enzyme-targeted polymers to the efficacy, synergy, and selectivity for the inhibition of cancer cell proliferation. The results revealed that employing a moderate chain length as a scaffold allowed for an intrinsically high efficacy and synergy of proximal enzyme-targeted polymers, in contrast to single enzyme-targeted polymers that prefer longer chain length for efficacy. The synergy obtained in proximal enzyme targeting was not provided by the combination of the corresponding small molecules. Moreover, the maturation of the synergistic efficacy of the proximal enzyme-targeted polymers also improved selectivity. This study proposes a rational design for polymer inhibitors and/or ligands for cancer cells with a high efficacy and selectivity.

Suppressed Thermal Quenching via Tetrafluoroborate-Induced Surface Reconstruction of CsPbBr3 Nanocrystals for Efficient Perovskite Light-Emitting Diodes.

Although metal-halide perovskite nanocrystals (NCs) have garnered significant attention for optoelectronic applications, the presence of electrically insulating organic ligands in CsPbBr3 NCs hinders efficient charge injection and transportation in light-emitting diodes (LEDs). A common approach to address this issue involves ligand exchange with shorter ligands and precise control of the surface ligand density through additional purification steps. Nevertheless, the practical application of these methods has been hindered by their poor structural integrity and high surface-defect density, which remain a challenge. Our investigation reveals that NOBF4 treatment effectively replaces native ligands with BF4- anions, in which BF4- anions are readily coordinated with the positively charged CsPbBr3 surface metal centers, thereby improving the photoluminescence quantum yield (PLQY) and thermal stability. In particular, the presence of BF4- anions coordinated at CsPbBr3 surfaces efficiently suppresses the pathway of excitons toward thermally activated nonradiative recombination, leading to minimal thermal quenching and superior device performance in green-emitting PeLEDs. Notably, PeLEDs based on CsPbBr3 NCs with the reconstructed surface via NOBF4 treatment exhibit an improved current efficiency of 31.12 cd/A and an external quantum efficiency of 11.24%, increased by 2.8 times compared to that of the pristine sample, indicating the enhanced hole-electron injection and transport into the CsPbBr3 NCs. Therefore, our results highlight the potential of NOBF4 as a versatile reagent for the ligand exchange and surface passivation of CsPbBr3 NCs, thereby offering promising prospects for the development of stable, high-performance PeLEDs.

Wide-pore fully porous mixed-mode octyl/pyridyl-bonded silica material with pH-dependent surface charge reversal for high-performance hydrophobic charge-induction chromatography of proteins

In an attempt to overcome silanophilic interactions like observed on popular reversed-phase butyl‑bonded silica stationary phases in protein HPLC, a mixed-mode stationary phase based on wide pore silica (3 µm, 300 Å) was prepared by co-immobilization of octyl and 2-pyridylethyl ligands. The surface modification was performed by a new approach using synthesized functional silatranes of the above ligands and prewetted silica. It allowed to generate a dense polymeric siloxane layer on the silica surface. Butyl-bonded silica and octyl/3-aminopropyl-bonded mixed-mode silica phases were prepared for comparison. The modified silicas were subsequently characterized by elemental analysis regarding ligand densities, by solid-state 29Si and 13C cross polarization/magic angle spinning nuclear magnetic resonance spectroscopy for confirming the surface-bonded structure, and by pH-dependent ζ-potential measurements via electrophoretic light scattering providing net surface charge information at distinct pH values. While the classical butyl‑bonded stationary phase revealed negative ζ-potential over the entire pH range investigated (pH 3.5–9.5) due to residual silanols and the mixed-mode octyl/3-aminopropyl-bonded silica positive ζ-potential over the entire pH range, pH-dependent charge reversal was observed at approximately pH 5.5 for the octyl/pyridyl-bonded stationary phase. Then, a test set of proteins differing in hydrophobicities and isoelectric points was employed to evaluate the retention characteristics of all three synthesized stationary phases over the pH range of 3 to 7.5 by acetonitrile-gradient elution reversed-phase HPLC. Under acidic conditions (pH 3) the mixed-mode phases octyl/pyridyl-silica and octyl/aminopropyl-silica showed reduced retention and improved peak shapes due to repulsive interactions preventing silanophilic interactions, while protein separations by their hydrophobicities were achieved (repulsive charge-assisted protein RPLC). Finally, the prepared novel mixed-mode octyl/pyridyl-bonded stationary phase was evaluated in hydrophobic charge induction chromatography mode for protein separation of the same test set. Instead of an organic modifier gradient, elution was enforced by a pH gradient from almost neutral to acidic pH at constant organic modifier content of 10 %. This chromatographic mode showed orthogonal retention characteristics and reversed elution order compared to above organic gradient RP-HPLC. In addition, significantly less organic solvent was used under these conditions, classifying it as a green protein LC technology.

Microtubules Disruption Alters the Cellular Structures and Mechanics Depending on Underlying Chemical Cues.

The extracellular matrix determines cell morphology and stiffness by manipulating the cytoskeleton. The impacts of extracellular matrix cues, including the mechanical and topographical cues on microtubules and their role in biological behaviors, are previously studied. However, there is a lack of understanding about how microtubules (MTs)are affected by environmental chemical cues, such as extracellular matrix density. Specifically, it is crucial to understand the connection between cellular morphology and mechanics induced by chemical cues and the role of microtubules in these cellular responses. To address this, surfaces with high and low cRGD (cyclic Arginine-Glycine-Aspartic acid) peptide ligand densities are used. The cRGD is diluted with a bioinert ligand to prevent surface native cellular remodeling. The cellular morphology, actin, and microtubules differ on these surfaces. Confocal fluorescence microscopes and atomic force microscopy (AFM) are used to determine the structural and mechanical cellular responses with and without microtubules. Microtubules are vital as an intracellular scaffold in elongated morphology correlated with low cRGD compared to rounded morphology in high cRGD substrates. The contributions of MTs to nucleus morphology and cellular mechanics are based on the underlying cRGD densities. Finally, this study reveals a significant correlation between MTs, actin networks, and vimentin in response to the underlying densities of cRGD.

Nanostructured Affinity Membrane to Isolate Extracellular Vesicles from Body Fluids for Diagnostics and Regenerative Medicine.

Electrospun regenerated cellulose (RC) nanofiber membranes were prepared starting from cellulose acetate (CA) with different degrees of substitution. The process was optimized to obtain continuous and uniformly sized CA fibers. After electrospinning, the CA membranes were heat-treated to increase their tensile strength before deacetylation to obtain regenerated cellulose (RC). Affinity membranes were obtained by functionalization, exploiting the hydroxyl groups on the cellulose backbone. 1,4-Butanediol-diglycidyl ether was used to introduce epoxy groups onto the membrane, which was further bioconjugated with the anti-CD63 antibody targeting the tetraspanin CD63 on the extracellular vesicle membrane surface. The highest ligand density was obtained with an anti-CD63 antibody concentration of 6.4 µg/mL when bioconjugation was performed in carbonate buffer. The resulting affinity membrane was tested for the adsorption of extracellular vesicles (EVs) from human platelet lysate, yielding a very promising binding capacity above 10 mg/mL and demonstrating the suitability of this approach.

Timescale dependent homogeneous assembly of lipid-polymer hybrid nanoparticles in laminar mixing for enhanced lung cancer treatment

The homogeneity of core–shell structure lipid-polymer hybrid nanoparticles (HNPs) is crucial for efficient intracellular cargo delivery. While microfluidic techniques have been recognized for their capabilities in precisely controlling the size and drug encapsulation efficiency, there is little research exploring the impact of mass transfer behavior within microchannels on the homogeneous assembly process of HNPs. Here, we manipulated the laminar flow state within TrM device to achieve controlled assembly of HNPs and explored a timescale dependent assembly technique to ensure the homogeneity of folate modified HNPs (FHNPs). Our founding indicate that this method enabled the control over the growth kinetics of PLGA cores within a timescale (τgrow) of 1–15 ms. The homogeneous ligand assembly on the surface of FHNPs can only be achieved when τgrow exceeds the timescale of functional lipid coating (τcoating). Compared to conventional bulk mixing methods, this strategy significantly reduces the risk of heterogeneous assembly in FHNPs fabrication and ensures consistent reproducibility across batches. The homogeneous FHNPs (HFHNPs) fabricated through this method exhibit precise control over particle size (ranging from 75 nm to 150 nm), low polydispersity index, and consistent core–shell structure. Furthermore, this strategy enhances the density of available folate ligands on the surface of FHNPs. In subsequent in vitro and in vivo anti-tumor assays, the icariside Ⅱ (IS) loaded HFHNPs (IS@HFHNPs) exhibited enhanced cellular uptake and tumor accumulation behavior. the timescale dependent homogeneous assembly method for HNPs developed in this research presents a promising avenue for maintaining quality in the synthesis of self-assembly composite nanomecidine.

A Multifunctional Nanostructured Hydrogel as a Platform for Deciphering Niche Interactions of Hematopoietic Stem and Progenitor Cells.

For over half a century, hematopoietic stem cells (HSCs) have been used for transplantation therapy to treat severe hematologic diseases. Successful outcomes depend on collecting sufficient donor HSCs as well as ensuring efficient engraftment. These processes are influenced by dynamic interactions of HSCs with the bone marrow niche, which can be revealed by artificial niche models. Here, a multifunctional nanostructured hydrogel is presented as a 2D platform to investigate how the interdependencies of cytokine binding and nanopatterned adhesive ligands influence the behavior of human hematopoietic stem and progenitor cells (HSPCs). The results indicate that the degree of HSPC polarization and motility, observed when cultured on gels presenting the chemokine SDF-1α and a nanoscale-defined density of a cellular (IDSP) or extracellular matrix (LDV) α4β1 integrin binding motif, are differentlyinfluenced on hydrogels functionalized with the different ligand types. Further, SDF-1α promotes cell polarization but not motility. Strikingly, the degree of differentiation correlates negatively with the nanoparticle spacing, which determines ligand density, but only for the cellular-derived IDSP motif. This mechanism potentially offers a means of predictably regulating early HSC fate decisions. Consequently, the innovative multifunctional hydrogel holds promise for deciphering dynamic HSPC-niche interactions and refining transplantation therapy protocols.

Fabrication of electrospun ion exchanger adsorbents with morphologies designed for the separation of proteins and plasmid DNA

Electrospun cellulose adsorbents are an emergent class of materials applied to a variety of bioprocess separations as an analogue to conventional packed bed chromatography. Electrospun adsorbents have proven to be effective as rapid cycling media, enabling high throughput separation of proteins and viral vectors without compromising selectivity and recovery. However, there is a current lack of knowledge in relation to the manipulation and control of electrospun adsorbent structure with function and performance to cater to the separation needs of emerging, diverse biological products.In this study, a series of electrospun cellulose adsorbents were fabricated by adjusting their manufacturing conditions. A range of fiber diameters (400 to 600 nm) was created by changing the electrospinning polymer solution. Additionally, a range of porosities (0.4 to 0.7 v/v) was achieved by varying the laminating pressures on the electrospun sheets. The adsorbents were functionalized with different degrees of quaternary amine ligand density to create 18 prototype anion exchangers. Their morphology was characterized by BET nitrogen adsorption surface area, X-ray computed tomography, capillary flow porometry and scanning electron microscopy measurements.The physical characteristics of the adsorbents were used in an adapted semi-empirical model and compared to measured permeability data. Permeabilities of prototypes ranged from 10−2 to 10−4 mDarcy. The measured data showed good adherence to modelled data with possible improvements in acquiring wet adsorbent characteristics instead of dried material. Finally, the electrospun adsorbents were characterized for their binding capacity of model proteins of different sizes (diameters of 3.5 nm and 8.9 nm) and plasmid DNA. Static binding capacities ranged from 5 mg/ml to 25 mg/ml for the proteins and plasmid DNA and showed <20 % deviation from monolayer coverage based on BET surface area. Therefore, it was concluded that the electrospun adsorbents most likely adsorb monolayers of proteins and plasmid DNA on the surface with minimal steric hindrance.

Superposition of Substrate Deformation Fields Induced by Molecular Clutches Explains Cell Spatial Sensing of Ligands.

Cells can sense the physical properties of the extracellular matrices (ECMs), such as stiffness and ligand density, through cell adhesions to actively regulate their behaviors. Recent studies have shown that varying ligand spacing of ECMs can influence adhesion size, cell spreading, and even stem cell differentiation, indicating that cells have the spatial sensing ability of ECM ligands. However, the mechanism of the cells' spatial sensing remains unclear. In this study, we have developed a lattice-spring motor-clutch model by integrating cell membrane deformation, the talin unfolding mechanism, and the lattice spring for substrate ligand distribution to explore how the spatial distribution of integrin ligands and substrate stiffness influence cell spreading and adhesion dynamics. By applying the Gillespie algorithm, we found that large ligand spacing reduces the superposition effect of the substrate's displacement fields generated by pulling force from motor-clutch units, increasing the effective stiffness probed by the force-sensitive receptors; this finding explains a series of previous experiments. Furthermore, using the mean-field theory, we obtain the effective stiffness sensed by bound clutches analytically; our analysis shows that the bound clutch number and ligand spacing are the two key factors that affect the superposition effects of deformation fields and, hence, the effective stiffness. Overall, our study reveals the mechanism of cells' spatial sensing, i.e., ligand spacing changes the effective stiffness sensed by cells due to the superposition effect of deformation fields, which provides a physical clue for designing and developing biological materials that effectively control cell behavior and function.

Ultralow-Energy-Consumption Photosynaptic Transistor Utilizing Conjugated Polymers/Perovskite Quantum Dots Nanocomposites With Ligand Density Optimization.

The photosynaptic transistor stands as a promising contender for overcoming the von Neumann bottleneck in the realm of photo-communication. In this context, photonic synaptic transistors is developed through a straightforward solution process, employing an organic semiconducting polymer with pendant-naphthalene-containing side chains (PDPPNA) in combination with ligand-density-engineered CsPbBr3 perovskite quantum dots (PQDs). This fabrication approach allows the devices to emulate fundamental synaptic behaviors, encompassing excitatory postsynaptic current, paired-pulse facilitation, the transition from short-to-long-term memory, and the concept of "learning experience." Notably, the phototransistor, incorporating the blend of the PDPPNA and CsPbBr3 PQDs washed with ethyl acetate, achieved an exceptional memory ratio of 104. Simultaneously, the same device exhibited an impressive paired-pulse facilitation ratio of 223% at a moderate operating voltage of -4V and an extraordinarily low energy consumption of 0.215 aJ at an ultralow operating voltage of -0.1mV. Consequently, these low-voltage synaptic devices, constructed with a pendant side-chain engineering of organic semiconductors and a ligand density engineering of PQDs through a simple fabrication process, exhibit substantial potential for replicating the visual memory capabilities of the human brain.

Synthesis and Reactivity of Amino(Ylide)Stannylenes

AbstractThe synthesis of two stable monoylide‐substituted stannylenes of type YCNSnR [R=Cl (1) or N(SiMe3)2 (2), and YCN=Ph3P(CN)C] starting from the cyanido‐substituted α‐metallated ylide YCN–K and SnCl2 or (SiMe3)2NSnCl is reported. Coordination of the cyano group to the tin center results in the dimerization of both stannylenes 1 and 2 in the solid state as well as in solution, where syn‐ and anti‐isomers are present. X‐ray diffraction analyses in combination with DFT calculations revealed that the π‐electron density of the ylide ligand is predominantly shifted into the cyano moiety rather than towards the tin center. This results in a strong preference of the dimers over the monomers, which is further emphasized by the reaction with 2,5‐di‐tert‐butylhydroquinone, which undergoes a [1+4] addition to the tin center to yield a spiro compound while preserving the cyclic core of the dimer. In contrast, phenyl isocyanate and dicyclohexylcarbodiimide insert into the Sn−Cylide bond, ultimately leading to the cleavage of the dimer and the formation of monomeric stannylenes with an ylide‐substituted thioamidato and amidinato ligand, respectively.

Newly synthesised diglycolamide functionalised silica gel with terminal 2-ethylhexyl alkyl chain, Silica-DGA (2EH) having high ligand density for adsorption of trivalent actinide and lanthanide from acidic medium

A novel diglycolamide resin with 2-ethylhexyl terminal alkyl chain functionalised to silica gel was synthesised and characterised by ATR-FTIR, SEM, TG/DSC, &13C (CP/MAS) solid state NMR techniques. Effective functionalization of the organic ligand upon silica gel was confirmed from the two carbonyl stretching frequencies at 1735 cm−1 and 1619 cm−1 in the FTIR spectrum and carbonyl carbon atom signal at 170 ppm in 13C (CP/MAS) solid state NMR spectrum. Thermo gravimetric measurement showed 17.3 ± 0.2 % (W/W) weight loss corresponding to the ligand loading value of 425 µmol/g. The resin showed very high uptake of trivalent lanthanide and actinide ions from 4.0 M HNO3 medium and very low distribution of Cs & Sr; Kd ∼ 1.1×103 mL/g for Am(III), ∼ 1.41×103 mL/g for Eu(III), ∼2.5 mL/g for Sr and 1.53 mL/g for Cs. FTIR spectroscopic study of the Eu3+ adsorbed resin showed single carbonyl stretching frequency at 1654 cm−1, instead of the two carbonyl stretching frequencies in fresh silica-DGA(2EH) resin indicating complexation through carbonyl oxygen. Very low Kd of ∼1.2–5.1 mL/g for lanthanides/actinides from 4.0 M HNO3 containing water soluble DGA namely N, N, N, N, Tetraethyldiglycolamide (TEDGA) in the concentration range 0.3–0.1 M indicates 99 % back adsorption feasibility.

Extracellular Matrix Sulfation in the Tumor Microenvironment Stimulates Cancer Stemness and Invasiveness.

Tumor extracellular matrices (ECM) exhibit aberrant changes in composition and mechanics compared to normal tissues. Proteoglycans (PG) are vital regulators of cellular signaling in the ECM with the ability to modulate receptor tyrosine kinase (RTK) activation via their sulfated glycosaminoglycan (sGAG) side chains. However, their role on tumor cell behavior is controversial. Here, it is demonstrated that PGs are heavily expressed in lung adenocarcinoma (LUAD) patients in correlation with invasive phenotype and poor prognosis. A bioengineered human lung tumor model that recapitulates the increase of sGAGs in tumors in an organotypic matrix with independent control of stiffness, viscoelasticity, ligand density, and porosity, is developed. This model reveals that increased sulfation stimulates extensive proliferation, epithelial-mesenchymal transition (EMT), and stemness in cancer cells. The focal adhesion kinase (FAK)-phosphatidylinositol 3-kinase (PI3K) signaling axis is identified as a mediator of sulfation-induced molecular changes in cells upon activation of a distinct set of RTKs within tumor-mimetic hydrogels. The study shows that the transcriptomic landscape of tumor cells in response to increased sulfation resembles native PG-rich patient tumors by employing integrative omics and network modeling approaches.

Rational Design of Targeted Gold Nanoclusters with High Affinity to Integrin αvβ3 for Combination Cancer Therapy.

The unique attributes of targeted nano-drug delivery systems (TNDDSs) over conventional cancer therapies in suppressing off-target effects make them one of the most promising options for cancer treatment. There is evidence that the density of surface-conjugated ligands is a crucial factor in achieving the desired therapeutic efficacy of TNDDSs, but this is hardly manageable in conventional nanomaterials. In this context, ligand-protected gold nanoclusters (AuNCs) are excellent candidates for developing new TNDDSs with a unique control on their surface functionalities, thus helping to achieve enhanced delivery performance. Here, we study the interactions and binding free energies between ten different functionalized Au144(SR)60 (SR = thiolate ligand) nanoclusters and integrin αvβ3 using molecular dynamics simulations and the umbrella sampling method to obtain the optimal formulations. The AuNCs were functionalized with anticancer drugs (5-fluorouracil or signaling pathways inhibitors, such as capivasertib, linifanib, tanespimycin, and taselisib) and integrin-targeting peptides (RGD4C or QS13), and we identified the optimal mixed ligand layer to enhance their binding affinity to the cancer cell receptor. The results showed that changing the proportions of the same type of ligands on the surface of AuNCs led to differences of up to 38 kcal/mol in computed binding free energies. RGD4C as the targeting peptide resulted in greater affinity for αvβ3, and in most formulations studied, a higher amount of drug than peptide was needed. Polar and charged residues, such as Ser123, Asp150, Tyr178, Arg214, and Asp251 were found to play a significant role in AuNC binding. Our simulations also revealed that Mn2+ cations are crucial for stabilizing the αvβ3-AuNC complex. These findings demonstrate the potential of carefully designing the surface composition of TNDDSs to optimize their target affinity and specificity.