Level Set Volume Of Fluid Method Research Articles

Nuclear Meltdown Relocation and Core Catcher Analysis

Nuclear meltdown with the potential human and environmental harm is one of the major accident hazard (MAH) faced by nuclear power plants. Limiting (or entirely avoiding) criticality events are the main design strategies for reactors of generations 3½ and 4 (Gen3½ and Gen4). These include ensuring negative void and negative temperature coefficients (for both moderator and fuel) regardless of operational conditions, which provide a self-regulating mechanism that helps preventing accidents occurrence (i.e., to address safety and reliability aspects of Gen4’s goals). However, in severe accident scenarios (e.g. during loss-of-coolant, LOCA, events) where failure to extract heat from the reactor may lead to core degradation, strategies to mitigate reactor meltdown and relocation are critical in the design of safety protocols. This work aims to numerically investigate core relocation as an integrated multi-fluid and heat dynamics problem in which flow of melted materials (UO2, Zircaloy and graphite) are modelled through interface capturing/tracking methods. Two interface tracking/capturing methods were compared, the level-set volume of fluid method (VOF) in Ansys Fluent, and the compressive advection method (CAM) in Fluidity/ICFERST. Both methods are in good agreement for the core relocation simulation. An in-vessel core catcher (IVCC) of tungsten alloy was also proposed to demonstrate core degradation control strategy through cooling of the melted multi-materials. The IVCC was simulated with a multifluid model in Ansys Fluent, in a specified applied heat flux model. The thickness of the IVCC is 0.20 m and the heat flux used is 600 kW m-2. The tungsten material used was able to withstand both thermal and mechanical loads on the lower plenum by extracting decay heat from the corium.

Algebraic coupled level set-volume of fluid method for surface tension dominant two-phase flows

In this study, an Algebraic Coupled Level Set-Volume of Fluid (A-CLSVOF) method is proposed for the simulation of interfacial capillary flows. The Volume of Fluid (VOF) method is utilized to incorporate one-way coupling with the Level Set (LS) function in order to improve the accuracy of the surface tension force calculation and to reduce the presence of parasitic currents. In this method, both VOF and LS functions are transported where the new volume fraction determines the interface seed position utilized by the reinitialization procedure for the LS field. Computational efficiency is enhanced through the use of the advected LS field, serving as an initial condition for the reinitialization procedure. The Hamilton–Godunov function is used with a second order (in space and time) discretization scheme to produce a signed distance function. In order to evaluate the performance of the methodology implemented here for capillary dominant flows, four different cases were considered: 1. static droplet; 2. capillary wave relaxation; 3. Rayleigh–Taylor instability and 4. droplet impact on a liquid pool. The simulations demonstrated reduction in spurious currents, accurately predicted capillary pressure and demonstrated overall improvements in efficiency and error reduction owing to the addition of LS advection. The present methodology is tested against previously published experimental results for a droplet impact on a deep liquid pool. Simulation results demonstrate excellent agreement with measured interface height up to and beyond the formation of a Rayleigh–Jet and break-up formation of a secondary daughter drop.

Assessment of Turbulence Models for Prediction of Intermixed Amount with Free Surface Variation Using Coupled Level-Set Volume of Fluid Method

Assessment of Turbulence Models for Prediction of Intermixed Amount with Free Surface Variation Using Coupled Level-Set Volume of Fluid Method