Leucogranite Dikes Research Articles

Multi-stage leucogranite emplacement in the Yalashangbo dome in northern Himalaya: Trigger and consequence of faulting along the South Tibet Detachment System

Leucogranitic dikes emplaced at the lower-middle crust are particularly widespread in the Himalayas. How the magmatic activities evolved in relation to faulting along the Southern Tibetan Detachment system (STDS) remains debated. In this study, we investigate the multi-stage leucogranitic emplacement in relation to the structural evolution of the detachment fault in the Yalashangbo dome through detailed macro- and microscopic structural observations, LA-ICP-MS monazite U-Th-Pb dating, and whole-rock geochemical analysis of the leucogranitic dikes. We identified late syn- and post-kinematic granitic dikes from the dome. Timing of dominant STDS faulting is constrained from 27 to 17 Ma. Based on synthesis of geochronological and geochemical results of the present and previous studies, we suggest that two dominant stages of granitic emplacement occurred from Eocene to Miocene along the High Himalayas. An early stage of leucogranitic activity was probably ascribed to partial melting of mafic juvenile lower crust due to heating related to asthenosphere upwelling as the result of slab tearing or break-off during the Indian subduction. Emplacement of the leucogranitic melts subsequently softened the middle and lower crust and triggered the initiation of detachment faulting along the STDS as early as ca. 35 Ma. The large-scale detachment faulting likely led to intensive localized decompression melting of the lower crust. Contemporaneous detachment faulting in the lithospheric mantle allowed heat transfer from the asthenosphere to the lower crust, enhancing lower crustal melting and leading to generally higher crystallization temperatures in the late syn-kinematic granites than the post-kinematic ones.

Protracted and Progressive Crustal Melting during Continental Collision in the Pamir and Plateau Growth

Abstract Determining crustal melting in parallel with geodynamic evolution provides critical information on plateau crustal thickening and uplift. Here we investigate the timing and duration of crustal melting through in situ analysis of zircon U–Pb ages, trace elements and Hf–O isotopes, and whole-rock elements and Sr–Nd–Hf isotopes for the granites and high-grade metamorphic rocks from the Pamir Plateau. Zircon dates record protracted crustal melting for both Central Pamir (43–33 and 22–12 Ma) and South Pamir (28–10 Ma). The Pamir Cenozoic granites are characterized by significant elemental and isotopic heterogeneity. The elemental variability within the Pamir Cenozoic granites is dominantly attributed to fractional crystallization of K-feldspar and plagioclase with subordinate biotite from a variably fractionated melt, and the accumulation of early crystallized feldspar during magma ascent. Peritectic mineral entrainment and accessory mineral crystallization had some influence on the geochemical characteristics of the garnet-bearing leucogranite dikes. Zircon Hf isotopes and whole-rock Sr–Nd–Hf isotopes show secular variations for both Central and South Pamir granites. The Central Pamir granites show a mild decrease in whole-rock ƐNd(t) values from Eocene (−4.3 to −4.9) to Miocene (−6.2 to −7.7), and the zircon ƐHf(t) values decrease from c. 40 Ma (+2 to −5) to c. 10 Ma (−4 to −8). In contrast, the South Pamir granites have highly variable whole-rock Sr–Nd–Hf (87Sr/86Sr(i) = 0.7053 to 0.7830; ƐNd(t) = −31.5 to +0.2; ƐHf(t) = −40.0 to +8.2) and zircon Hf isotopes (ƐHf(t) = −31.7 to +7.5) and display a strong decrease in ƐNd(t) and ƐHf(t) values from c. 25 Ma to c. 13 Ma. Geochemical and isotopic data indicate that both the Central and South Pamir experienced crustal melting from juvenile lower crust to ancient lower-middle crustal materials, and Indian crustal materials were incorporated into the melt region of the South Pamir leucogranites from c. 20 Ma. Our study highlights a causal link between a chain of events that includes magma underplating induced by lithosphere thinning and slab breakoff, lithosphere delamination and underthrusting of Indian lithosphere, and formation of the Cenozoic granites in Pamir. This series of processes are incorporated here into a comprehensive model for the geodynamic evolution of the Pamir during the India–Asia collision.

High-pressure granulite-facies metamorphism and anatexis of deep continental crust: New insights from the Cenozoic Ailao Shan–Red River shear zone, Southeast Asia

Studies of crustal anatexis have provided valuable insights into the evolution of metamorphism, deformation, and tectonic processes at convergent plate margins during the orogeny. The transition of metatexite to diatexite migmatites records crucial information about the tectonothermal evolution and rheology of the deep crust. Along the Ailao Shan–Red River shear zone, metatexite migmatites, diatexite migmatites, and leucogranites are widely distributed within the upper amphibolite and granulite facies zones of the Diancang Shan metamorphic complex. The high-pressure granulite-facies metamorphism, with the mineral assemblage comprising garnet + kyanite + K–feldspar + plagioclase + biotite + quartz + melt, is first recognized from the patch of metatexite migmatites in the complex. Detailed petrographic evidence and thermodynamic modeling revealed that the migmatite underwent nearly isothermal decompression metamorphism, presenting a clockwise P–T path. The peak metamorphic P–T conditions are constrained at approximately 11 kbar and 810 °C using thermodynamic modeling, and the amount of melt generated during heating is up to 18 mol%. The extraction and segregation of the melts are evidenced by the presence of leucosomes within the migmatites and leucogranite dikes, which record the melt flow network through the crust. Zircon and monazite geochronology of migmatites record the timing of the melting episode that began at approximately 36 Ma and lasted until 20 Ma. All these results are consistent with orogenic crust thickening accompanied by pervasive anatexis during the Late Eocene to the Early Oligocene in the Ailao Shan–Red River shear zone. Combined with the available data related to the other continental–exhumed shear zone, we propose that the crustal anatexis had a significant effect on the thermal state of deep–seated shear zones, thus controlling the rheological behavior of the lithosphere and playing an essential role in the initial localization of shearing in the lower crust.

Tectonomagmatic development of the Eocene Pasevh pluton (NW Iran): Implications for the Arabia-Eurasia collision

Abstract The Pasveh pluton is one of a number of intrusive complexes in the northwestern part of the Sanandaj-Sirjan Zone (SSZ), NW Iran. The major part of this complex is composed of high-K, calc-alkaline granitic rocks. The geochemical data indicate that the granitic rocks, although compositionally similar, are not cogenetic and can be divided into three groups. The first group (mesocratic granitoids) is represented by the largest outcrop in the Pasveh pluton. It is mainly composed of metaluminous magnesian monzodiorite to granodiorite with abundant MME and gabbroic enclaves. Zircon LA–ICP–MS U–Pb dating yielded Eocene crystallization ages (ca. 40 Ma) for this group. The monzodiorite (eNdt = +2.0 to +2.5), granodiorite (eNdt = +1.5 to +1.6), MME and gabbroic enclave (eNdt = +3.3 to +4.7) have distinct Nd isotopic compositions. The second group is composed of Eocene (39.7 ± 0.6 Ma), weakly peraluminous monzogranites that have Carboniferous and Cretaceous inherited zircons. Leucocratic granitic dikes of adakitic composition comprise the third group of Pasveh silicic rocks. The dikes are slightly younger (37.5 ± 0.3 Ma) than host rocks and cross-cut the mesocratic granitoids. Our results indicate that the underplating of basaltic magmas related to extensional stress in the overlying Iranian plate during the Eocene induced partial melting of the lower crust. Differences in the amount of partial melting of the source rocks are likely responsible for the volume and heterogeneity of their melt compositions. Subsequent to melt generation, it is possible that the silicic magmas mixed with mafic magmas in variable proportions to produce the hybridized rocks and enclaves. The intrusion of leucogranite dikes after the emplacement of the Pasveh pluton suggests that during or slightly after Neo-Tethys subduction there was another period of magmatism that was likely related to the melting of the subducted slab.

Elemental substitutions and compositional evolution during tourmaline formation in metasomatic schistose rocks of Sikait area in the Southern Eastern Desert, Egypt

Tourmaline deposit in Sikait area (Southern Eastern Desert of Egypt [SEDE]) is closely associated with metapelitic schistose rocks that belong to Neoproterozoic time. The distribution of tourmaline was mostly controlled by Nugrus shearing, along with schist leucocratic rock varieties (leucogranite, pegmatite, and aplite dikes), which are syntectonically dissected by hydrothermal quartz veins. Local concentrations of tourmaline occur either as discontinuous tourmalinite bands/pockets or as disseminated isolated clusters of crystals within the metapelitic schistose rocks, pegmatites, and quartz veins. Chemical and mineralogical changes accompanying with tourmaline formation have been observed within the schistose rocks in contact with a pegmatitic bodies in Sikait area. Four mineral assemblages were identified on approaching to the pegmatite contact: (1) Quartz-Biotite-Potassium Feldspar-Chlorite assemblage (Q-B-K-C); (2) Quartz-Biotite-Tourmaline-Chlorite assemblage (Q-B-T-C); (3) Tourmaline-Quartz-Muscovite assemblage (T-Q-M); and (4) Tourmaline-Quartz assemblage (T-Q). Toward the pegmatite contact, K, Li, Rb, SiO2, CaO, MgO, Sr, and Ba are decreased, while Al2O3, B2O3, Na2O, Fe (tot), Zr, Y, and Th are moderately increased. Variations in the mineral assemblages and whole-rock chemistry within the four alteration zones appear to be controlled by boron metasomatism and potash leaching. The normalized rare earth element patterns of rock samples from the four alteration zones suggest a partial alteration of the original sedimentary patterns by the metasomatic-magmatic fluids. The alteration could be either a single phase of interactions between pegmatite fluid and schists with B-, Li-, Rb-carrying fluid or a couple of phases (B-, Mn-, Be-rich fluid and Rb-, Li-, K-rich fluid). In all cases, boron from the pegmatite-associated fluids reacts with the surrounding schistose rocks to breakdown of sheet silicate which acts as “traps” for Rb, Sr, Li, Ba, and K and hence leads to tourmaline-rich assemblages.

Hornblende as a tool for assessing mineral-melt equilibrium and recognition of crystal accumulation

Abstract Bulk-rock compositions are commonly used as proxies for melt compositions, particularly in silicic plutonic systems. However, crystal accumulation and/or melt loss may play an important role in bulk-rock compositional variability (McCarthy and Hasty 1976; McCarthy and Groves 1979; Wiebe 1993; Wiebe et al. 2002; Collins et al. 2006; Deering and Bachmann 2010; Miller et al. 2011; Vernon and Collins 2011; Lee and Morton 2015; Lee et al. 2015; Barnes et al. 2016a; Schaen et al. 2018). Recognizing and quantifying the effects of crystal accumulation and melt loss in these silicic systems is challenging. Hornblende-melt Fe/Mg partitioning relationships and hornblende (Hbl) chemometry are used here to test for equilibrium with encompassing bulk-rock and/or glass compositions from several plutonic and volcanic systems. Furthermore, we assess the extent to which these tests can be appropriately applied to Hbl from plutonic systems by investigating whether Hbl from the long-lived (~10 Ma) Tuolumne Intrusive Complex preserves magmatic crystallization histories. On the basis of regular zoning patterns, co-variation of both fast- and slow-diffusing trace elements, Hbl thermometry, and compositional overlap with volcanic Hbl we conclude that Hbl from plutons largely preserve records supporting the preservation of a magmatic crystallization history, although many compositional analyses yield calculated temperatures <750 °C, which is unusual in volcanic Hbl. Hornblende is only rarely in equilibrium with host plutonic bulk-rock compositions over a wide range of SiO2 contents (42–78 wt%). Hornblende chemometry indicates that the majority of Hbl from the plutonic systems investigated here is in equilibrium with melts that are typically more silicic (dacitic to rhyolitic in composition) than bulk-rock compositions. These results are consistent with crystal accumulation and/or loss of silicic melts within middle- to upper-crustal plutons. Although the processes by which melts are removed from these plutonic systems is uncertain, it is evident that these melts are either redistributed in the crust (e.g., leucogranite dikes, plutonic roofs, etc.) or are instead erupted. In contrast, Hbl from volcanic rocks is more commonly in equilibrium with bulk-rock and glass compositions. In most cases, where Hbl is out of equilibrium with its host glass, the glasses are more evolved than the calculated melts indicating crystallization from a less fractionated melt and/or mixed crystal populations. Where Hbl is not in equilibrium with volcanic bulk-rocks, the bulk-rock compositions are typically more mafic than the calculated melts. In some intermediate volcanic samples, the occurrence of wide-ranges of calculated melt compositions is indicative of magma mixing. The general absence of Hbl with temperatures <750 °C from volcanic systems suggests that magmatic mushes below this temperature are unlikely to erupt. Our results indicate that bulk-rock compositions of granitic plutonic rocks only rarely approximate melt compositions and that the possibility of crystal accumulation and/or melt loss cannot be ignored. We suggest that detailed assessments of crystal accumulation and melt loss processes in magmatic systems are crucial to evaluating magma differentiation processes and discerning petrogenetic links between plutonic and volcanic systems.

Separating multiple episodes of partial melting in polyorogenic crust: An example from the Haiyangsuo complex, northern Sulu belt, eastern China

Abstract The exotic Haiyangsuo complex is structurally part of the Sulu belt but its contact relationship with surrounding Sulu gneisses is unexposed and therefore unknown, making its affinity uncertain. It comprises gneisses with in-source leucosomes that host minor metabasite bodies; both are cut by leucogranite dikes. In this study, we determine the timing and petrogenesis of leucosomes and leucogranites and assess the tectonic affinity of the complex based on data from gneisses and metabasites. Most zircon from gneisses and leucosomes has oscillatory-zoned cores with CL-bright overgrowth rims, but some has CL-dark cores or mantles between cores and rims. CL-dark and bright zircon yield weighted mean ages of ca. 1817–1812 Ma. CL-dark zircon has flat heavy rare earth element (HREE) patterns and crystallization temperatures of 829–875 °C, suggesting metamorphic growth, whereas rims have steep HREE patterns but a similar range of crystallization temperatures, suggesting growth from anatectic melt; εHf (t = 1813 Ma) of –18.3 to –10.8 indicates a North China Craton source. Magmatic zircon from metabasites yields ages of ca. 825 Ma, similar to those of scattered metabasite occurrences in the North China Craton. Paleoproterozoic zircon cores were scavenged during magma ascent. By contrast, zircon cores from the leucogranites yield concordant dates of 776–701 Ma, consistent with protolith ages in the Sulu belt, whereas overgrowth mantles and rims yield weighted mean ages of ca. 220 Ma and 162 Ma, respectively. Both mantles and rims host multiphase solid inclusions, representing former melt, suggesting anatexis and crystallization of zircon first during initial decompression and then during orogenic collapse of the Sulu belt; whole-rock Nd and Sr isotope compositions implicate the Sulu belt gneisses as the source of these melts. Our interpretation of these data is that the Haiyangsuo complex has an early geologic history similar to the Jiaobei terrane from the southeastern part of the North China Craton and was incorporated into the Sulu belt during Triassic collision of the Yangtze and North China Cratons. The two stages of melting relate to Upper Triassic early exhumation and Upper Jurassic late-stage orogenic collapse, during which the leucogranite magma was derived from a source similar to one elsewhere in the Sulu belt such as the subducted Yangtze Craton and not the North China Craton. This shows that during continental collisions, crust from the upper plate may be dragged into the subduction channel, deformed, and subsequently exhumed in association with partial melting of the crust.

The Aksug Porphyry Cu–Mo Deposit (Northeastern Tuva): Chronology of Magmatism and Ore Formation Processes (U–Pb and Re–Os Isotope Data) and Metallogenic Implications

Abstract —The Aksug porphyry Cu–Mo deposit is located in a region of long-lasting magmatic activity. Gabbroids of the Khoito-Oka complex are the earliest intrusive rocks, in which the Aksug granitoid pluton hosting ore-bearing small porphyry intrusions is localized. The intrusive activity was terminated with emplacement of late leucogranite dikes. There are different viewpoints on the age of magmatism and mineralization of the Aksug deposit, with the concept of their Devonian age prevailing. To solve the debatable issue, we performed isotope geochronological studies and analyzed new results of U–Pb (SHRIMP-II) zircon dating and previously published Re–Os molybdenite dates (518 ± 2, 516 ± 2, and 511 ± 2 Ma). The concordant U–Pb zircon ages for igneous rocks are younger than the Re–Os age for mineralization. New U–Pb dating of Khoito-Oka gabbro-diorites has yielded an age of 503 ± 2 Ma. The U–Pb SHRIMP zircon age of tonalites from the Aksug pluton has been estimated at 504 ± 5 Ma. The U–Pb zircon ages for ore-related tonalite porphyry I and tonalite porphyry II are 500 ± 6 and 499 ± 6 Ma, respectively. The obtained SHRIMP age for leucogranite dike is 509 ± 4 Ma. Two groups of U–Pb dates have been obtained for each of the analyzed zircon samples: close to the Re–Os dates (518–511 ± 2 Ma) and younger (507–486 Ma). The weighted average zircon ages calculated for early and late populations from post-ore leucogranites are 515 ± 4 and 500 ± 4 Ma, respectively. We suggest that zircons with an age close to the Re–Os dates found in post-ore leucogranites were assimilated from the underlying substrate and zircons with an age of 500 ± 4 Ma crystallized from melt. The oldest U–Pb dates (509–515 Ma) of individual zircon grains from ore-bearing tonalite porphyry are consistent with the Re–Os molybdenite ages. Zircons from tonalite, tonalite porphyry, and Khoito-Oka gabbroids sometimes show internal textures indicating secondary alteration. The younger U–Pb concordia zircon ages relative to the Re–Os dates might be due to the influence of late thermal processes on the U–Pb isotopic system. The younger dates (486–507 Ma) of individual zircon grains probably reflect the time of the impact of a thermal fluid process. The weighted average of these younger dates (502 ± 2 Ma) falls within the weighted average age of post-ore leucogranites (500 ± 4 Ma). According to the Re–Os dates, the Aksug deposit formed at the end of the early Cambrian. Ore occurrences similar in magmatism and mineralization to the Aksug ore deposit are widespread in Tuva and in the Lake Zone in Mongolia. Therefore, it is necessary to reassess the role of the Cambrian and Devonian magmatism in the development of porphyry Cu–Mo mineralization both in Tuva and in the Altai–Sayan orogenic area.

Geochemical and geochronological constraints on the tectonic setting of the Xinlin ophiolite, northern Great Xing’an Range, NE China

The Xinlin ophiolite, located in the Great Xing’an Range domain of the Central Asian Orogenic Belt (CAOB), is considered to represent a fragment of an oceanic plate. The ophiolite consists of several discontinuous blocks composed dominantly of serpentinized ultramafic rocks with subordinate cumulate gabbros, basalts, and diabase dikes, which are intruded by younger leucogranite dikes. Here we characterize the geochemical features and formation age of the ophiolite. The ultramafic rocks are dominated by harzburgite with minor dunite, and are enriched in large-ion lithophile elements (LILEs) and light rare earth elements (LREEs), consistent with remnants of oceanic mantle. The mafic rocks show depletion in some high-field-strength elements (HFSEs) and have relatively low TiO2 and MgO contents, and likely originated from an E-MORB-like source in a back-arc setting. This suggests that the ophiolite is of supra-subduction zone (SSZ) origin. The cross-cutting leucogranite dikes, most of which are trondhjemitic, have high Al2O3 contents, low K2O/Na2O ratios, and negative zircon εHf(t) values (-8.5 to -3.8; average = -5.8), which are features distinct to other granites (e.g., fractionation-, shear-, and subduction-types) within the ophiolite and to coeval granitoids in the northern Great Xing’an Range. Zircon U-Pb dating on samples of gabbro and a leucogranite dike yielded ages of ca. 480 and 324 ± 1 Ma, respectively, suggesting that the ophiolite formed in the Early Ordovician and was emplaced at ca. 320 Ma. Together with the ages of ca. 480 Ma for the Duobaoshan arc and ca. 340 Ma for subduction-related high-Mg diorites, we suggest that ophiolite formation was probably related to the opening of an Ordovician back-arc basin, whereas formation of the younger leucogranite dikes was probably related to closure of the back-arc basin.

Geochronological and geochemical evidences for extension-related Neoarchean granitoids in the southern São Francisco Craton, Brazil

New LA-SF-ICP-MS U-Pb zircon dating of high-K granitoids from the Campo Belo metamorphic complex, southern São Francisco Craton (Brazil), reveals a long period (ca. 100My) of Neoarchean granitic magmatism that post-date the TTG magmatism. The oldest studied pluton is a highly porphyritic biotite orthogneiss emplaced at 2748±5Ma, followed by a hornblende-biotite orthogneiss (2727±7Ma). Both granitic bodies were affected by a deformation event prior to the emplacement of the Rio do Amparo, Bom Sucesso and Lavras granitoid plutons at 2716±6Ma, 2696±6Ma and 2646±5Ma, respectively. The Neoarchean granitic magmatism ended with the intrusion of peraluminous leucogranitic dikes at 2631±4Ma.The 2.73–2.65Ga Campo Belo granitoids share chemical features of A-type granites, such as high apatite- and zircon-saturation temperatures (mostly>800°C), relatively high Fe-number, high total alkalis and characteristic enrichment in LREE and HFSE although most samples of the Rio do Amparo granite have lower HFSE and LREE content that typical A-type granites but very high Th. The high Th content of the Rio do Amparo and Bom Sucesso granites may suggest involvement of Th-orthosilicate in their sources. The trace element composition permits to classify the Campo Belo granitoids as A2-type granites, suggesting derivation from partial melting of TTG-crustal sources likely in an extensional setting.Significant reworking of Mesoarchean crust is suggested by mostly negative εNdi values (Rio do Amparo: −2.0 and +3.1; Bom Sucesso: −3.6, −3.1 and +0.9; Lavras: −2.5 and −0.2) and old Nd model ages (TDM close to 3.1Ga), although with probable involvement of juvenile material (TDM of 2.7–2.9Ga). This contrasts with Neoarchean granites of the northern São Francisco and Congo cratons characterized by negligible juvenile imprint.The 2.75–2.63Ga Campo Belo granitoids witness the thermal stabilization of the Archean lithosphere through a major episode of high-K granitoid magmatism between 2760 and 2600Ma, which affected the whole São Francisco Craton and the northern Congo Craton.

Jurassic cooling ages in Paleozoic to early Mesozoic granitoids of northeastern Patagonia: 40Ar/39Ar, 40K–40Ar mica and U–Pb zircon evidence

U–Pb SHRIMP zircon crystallization ages and Ar–Ar and K–Ar mica cooling ages for basement rocks of the Yaminue and Nahuel Niyeu areas in northeastern Patagonia are presented. Granitoids that cover the time span from Ordovician to Early Triassic constitute the main outcrops of the western sector of the Yaminue block. The southern Yaminue Metaigneous Complex comprises highly deformed Ordovician and Permian granitoids crosscut by undeformed leucogranite dikes (U–Pb SHRIMP zircon age of 254 ± 2 Ma). Mica separates from highly deformed granitoids from the southern sector yielded an Ar–Ar muscovite age of 182 ± 3 Ma and a K–Ar biotite age of 186 ± 2 Ma. Moderately to highly deformed Permian to Early Triassic granitoids made up the northern Yaminue Complex. The Late Permian to Early Triassic (U–Pb SHRIMP zircon age of 252 ± 6 Ma) Cabeza de Vaca Granite of the Yaminue block yielded Jurassic mica K–Ar cooling ages (198 ± 2, 191 ± 1, and 190 ± 2 Ma). At the boundary between the Yaminue and Nahuel Niyeu blocks, K–Ar muscovite ages of 188 ± 3 and 193 ± 5 Ma were calculated for the Flores Granite, whereas the Early Permian Navarrete granodiorite, located in the Nahuel Niyeu block, yielded a K–Ar biotite age of 274 ± 4 Ma. The Jurassic thermal history is not regionally uniform. In the supracrustal exposures of the Nahuel Niyeu block, the Early Permian granitoids of its western sector as well as other Permian plutons and Ordovician leucogranites located further east show no evidence of cooling age reset since mica ages suggest cooling in the wake of crystallization of these intrusive rocks. In contrast, deeper crustal levels are inferred for Permian–Early Triassic granitoids in the Yaminue block since cooling ages for these rocks are of Jurassic age (198–182 Ma). Jurassic resetting is contemporaneous with the massive Lower Jurassic Flores Granite, and the Marifil and Chon Aike volcanic provinces. This intraplate deformational pulse that affected northeastern Patagonia during the Early Jurassic (Sinemurian–Pliensbachian) was responsible for the partial (re)exhumation of the mid-crustal Paleozoic basement along reactivated discrete NE–SW to ENE–WSW lineaments and the resetting of isotopic systems. These new thermochronological data indicate that Early Permian magmatic rocks of the Nahuel Niyeu block were below 300 °C for ca. 20 Ma prior to the onset of the main magmatic episode of the Late Permian to Triassic igneous and metaigneous rocks of the Yaminue block.

Serpentinization-driven extension in the Ronda mantle slab (Betic Cordillera, S. Spain)

We investigate the stress regimes acting during serpentinization and faulting of the largest known subcontinental lithospheric peridotite body, namely the Ronda peridotites (Betic Cordillera, S. Spain). Petrological and structural analyses on serpentinites grown along fault planes crosscutting the peridotite slab, reveal that they were developed during three superposed stress tensors: the oldest one (E1) is characterized by NW–SE sub-horizontal compression; the intermediate one consists in NE–SW to ENE–WSW extension with orthogonal compression (E2); and the youngest one (E3) shows a sub-vertical maximum stress axis and NW–SE sub-horizontal extension. During serpentinization, maximum and minimum stress axes flip between a NW–SE horizontal position and a vertical one in the whole peridotite body (E1 and E3), while E2 represents an intermediate stress stage. Field relationships and previous petrological and geochronological data indicate that serpentinization and associated stress tensors are coeval with intrusive leucogranite dikes crosscutting the peridotites, thus constraining these processes to 19–22Ma and occurring at upper continental crust depths (P<4kbar). Gravity data reveal that the average density of the Ronda mantle slab (~2.7–2.8g/cm3) shows a negligible contrast with the surrounding crustal rocks, thus suggesting that the peridotite body is serpentinized in a great proportion. Our preferred tectonic model to account for the evolution of the Ronda peridotites in the upper crust considers that E1 compression was linked to the collision of the Alborán continental domain with the Iberian passive margin during the Gibraltar Arc formation. Subsequently, the sudden onset of extension recorded within the peridotite slab (E2 and E3) was favored by serpentinization-driven buoyancy.

Late Ediacaran crustal thickening in Iran: Geochemical and isotopic constraints from the ~550 Ma Mishu granitoids (northwest Iran)

ABSTRACTThe aim of this article is to examine the geochemistry and geochronology of the Cadomian Mishu granites from northwest Iran, in order to elucidate petrogenesis and their role in the evolution of the Cadomian crust of Iran. The Mishu granites mainly consist of two-mica granites associated with scarce outcrops of tonalite, amphibole granodiorite, and diorite. Leucogranitic dikes locally crosscut the Mishu granites. Two-mica granites show S-type characteristics whereas amphibole granodiorite, tonalities, and diorites have I-type signatures. The I-type granites show enrichment in large-ion lithophile elements (e.g. Rb, Ba and K) and depletion in high field strength elements (e.g. Nb, Ti and Ta). These characteristics show that these granites have been formed along an ancient, fossilized subduction zone. The S-type granites have high K, Rb, Cs (and other large ion lithophile elements) contents, resembling collision-related granites. U–Pb zircon dating of the Mishu rocks yielded 238U/206Pb crystallization ages of ca. 550 Ma. Moreover, Rb–Sr errorchron shows an early Ediacaran age (547 ± 84 Ma) for the Mishu igneous rocks. The two-mica granites (S-type granites) show high 87Sr/86Sr(i) ratios, ranging from 0.7068 to 0.7095. Their ɛNd values change between −4.2 and −4.6. Amphibole granitoids and diorites (I-type granites) are characterized by relatively low 87Sr/86Sr(i) ratios (0.7048–0.7079) and higher values of ɛNd (−0.8 to −4.2). Leucogranitic dikes have quite juvenile signature, with ɛNd values ranging from +1.1 to +1.4 and Nd model ages (TDM) from 1.1 to 1.2 Ga. The isotopic data suggests interaction of juvenile, mantle-derived melts with old continental crust to be the main factor for the generation of the Mishu granites. Interaction with older continental crust is also confirmed by the presence of abundant inherited zircon cores. The liquid-line of descend in the Harker diagrams suggests fractional crystallization was also a predominant mechanism during evolution of the Mishu I-type granites. The zircon U–Pb ages, whole rock trace elements, and Sr–Nd isotope data strongly indicate the similarities between the Mishu Cadomian granites with other late Neoproterozoic–early Cambrian (600–520 Ma) granites across Iran and the surrounding areas such as Turkey and Iberia. The generation of the Mishu I-type granites could be related to the subduction of the Proto-Tethyan Ocean during Cadomian orogeny, through interaction between juvenile melts and old (Mesoproterozoic or Archaean) continental crust. The S-type granites are related to the pooling of the basaltic melts within the middle–upper parts of the thick continental crust and then partial melting of that crust.

Critical porosity of melt segregation during crustal melting: Constraints from zonation of peritectic garnets in a dacite volcano

The presence of leucogranitic dikes in orogenic belts suggests that partial melting may be an important process in the lower crust of active orogenies. Low seismic velocity and low electrical resistivity zones have been observed in the lower crust of active mountain belts and have been argued to reflect the presence of partial melt in the deep crust, but volcanoes are rare or absent above many of these inferred melt zones. Understanding whether these low velocity zones are melt-bearing, and if so, why they do not commonly erupt, is essential for understanding the thermal and rheologic structure of the crust and its dynamic evolution. Central to this problem is an understanding of how much melt can be stored before it can escape from the crust via compaction and eventually erupt. Experimental and theoretical studies predict trapped melt fractions anywhere from <5% to >30%. Here, we examine Mn growth-zoning in peritectic garnets in a Miocene dacite volcano from the ongoing Betic–Rif orogeny in southern Spain to estimate the melt fraction at the time of large-scale melt extraction that subsequently led to eruption. We show that the melt fraction at segregation, corresponding approximately to the critical melt porosity, was ∼30%, implying significant amounts of melt can be stored in the lower crust without draining or erupting. However, seismic velocities in the lower crust beneath active orogenic belts (southern Spain and Tibet) as well as beneath active magmatic zones (e.g., Yellowstone hotspot) correspond to average melt porosities of <10%, suggesting that melt porosities approaching critical values are short-lived or that high melt porosity regions are localized into heterogeneously distributed sills or dikes, which individually cannot be resolved by seismic studies.

Extrusion vs. duplexing models of Himalayan mountain building 2: The South Tibet detachment at the Dadeldhura klippe

Himalayan mountain building has been dominantly explained by two types of models: extrusion and duplexing. To elucidate possible roles of these mechanisms during emplacement of the Himalayan crystalline core, we investigate an area speculated to contain the southern leading edge of the crystalline core: the northeastern margin of the Dadeldhura klippe, western Nepal. We found an ~700m thick, primarily top-to-the-north shear zone within the klippe; we term this as the Tila shear zone. The shear zone occurs within a right-way-up metamorphic field gradient, and separates footwall gneiss from hanging wall schist. Similarly, deformation temperatures estimated from quartz and feldspar microstructures and quartz c-axis fabrics indicate a right-way-up thermal gradient of ~77–189°C/km. U–Pb zircon dating of post-kinematic leucogranite dikes suggests that ductile shearing along the Tila shear zone occurred prior to ~17–14Ma. We correlate the Tila shear zone to the South Tibet detachment (STD) on the basis of consistent structural fabrics (shear sense), lithologies, metamorphism, and deformation timing. This interpretation, in combination with regional constraints, indicates southwards-increasing proximity of the STD (Tila shear zone) and the Main Central thrust (MCT). These two shear zones are separated by ~3km of structural section in the northern portion of our study area, and become close to within ~1km of separation, in the southern portion. Interpolation suggests that the STD (Tila shear zone) and MCT merge 15±10km southwest of our study area. The increasing-to-south proximity and potential merger of the two shear zones suggest that the STD formed as a backthrust from the MCT. This interpretation contrasts with the long-standing normal fault interpretation of the STD. Because the STD and MCT bound the Himalayan crystalline core, these findings document crystalline core emplacement at depth via tectonic wedging. This kinematic evolution is consistent with duplexing, but not extrusion to the surface.

The Archean–Paleoproterozoic evolution of the Quadrilátero Ferrífero (Brasil): Current models and open questions

The Quadrilátero Ferrífero is a metallogenic district (Au, Fe, Mn) located at the southernmost end of the São Francisco craton in eastern Brazil. In this region, a supracrustal assemblage composed of Archean greenstone and overlying Neoarchean–Paleoproterozoic sedimentary rocks occur in elongated keels bordering domal bodies of Archean gneisses and granites. The tectonomagmatic evolution of the Quadrilàtero Ferrífero began in the Paleoarchean with the formation of continental crust between 3500 and 3200 Ma. Although this crust is today poorly preserved, its existence is attested to by the occurrence of detrital zircon crystals with Paleoarchean age in the supracrustal rocks. Most of the crystalline basement, which is composed of banded gneisses intruded by leucogranitic dikes and weakly foliated granites, formed during three major magmatic events: Rio das Velhas I (2920–2850 Ma), Rio das Velhas II (2800–2760 Ma) and Mamona (2760–2680 Ma). The Rio das Velhas II and Mamona events represent a subduction-collision cycle, probably marking the appearance of a modern-style plate tectonic regime in the Quadrilátero Ferrífero. Granitic rocks emplaced during the Rio das Velhas I and II events formed by mixing between a magma generated by partial melting of metamafic rocks with an end member derived by recycling gneissic rocks of older continental crust. After deformation and regional metamorphism at ca. 2770 Ma, a change in the composition of the granitic magmas occurred and large volumes of high-K granitoids were generated.The ca. 6000 m-thick Minas Supergroup tracks the opening and closure of a basin during the Neoarchean–Paleoproterozoic, between 2600 and 2000 Ma. The basal sequence involves continental to marine sediments deposited in a passive margin basin and contain as a marker bed the Lake Superior-type Cauê Banded Iron Formation. The overlying sediments of the Sabará Group mark the inversion of the basin during the Rhyacian Minas accretionary orogeny. This orogeny results from the collision between the nuclei of the present-day São Francisco and Congo cratons, generated the fold-and thrust belt structure of the Quadrilátero Ferrífero. Afterwards, the post- orogenic collapse resulted in the deposition of the Itacolomi Group and in the genesis of the dome-and-keel structure.In this paper, we review current knowledge about the 1500 Ma long-lasting tectonomagmatic and structural evolution of the Quadrilátero Ferrífero identifying the most compelling open questions and future challenges.

Himalayan gneiss dome formation in the middle crust and exhumation by normal faulting: New geochronology of Gianbul dome, northwestern India

A general lack of consensus about the origin of Himalayan gneiss domes hinders accurate thermomechanical modeling of the orogen. To test whether doming resulted from tectonic contraction (e.g., thrust duplex formation, antiformal bending above a thrust ramp, etc.), channel flow, or via the buoyant rise of anatectic melts, this study investigates the depth and timing of doming processes for Gianbul dome in the western Himalaya. The dome is composed of Greater Himalayan Sequence migmatite, Paleozoic orthogneiss, and metasedimentary rock cut by multiple generations of leucogranite dikes. These rocks record a major penetrative D2 deformational event characterized by a domed foliation and associated NE-SW–trending stretching lineation, and they are flanked by the top-down-to-the-SW (normal-sense) Khanjar shear zone and the top-down-to-the-NE (normal sense) Zanskar shear zone (the western equivalent of the South Tibetan detachment system). Monazite U/Th-Pb geochronology records (1) Paleozoic emplacement of the Kade orthogneiss and associated granite dikes; (2) prograde Barrovian metamorphism from 37 to 33 Ma; (3) doming driven by upper-crustal extension and positive buoyancy of decompression melts between 26 and 22 Ma; and (4) the injection of anatectic melts into the upper levels of the dome—neutralizing the effects of melt buoyancy and potentially adding strength to the host rock—by ca. 22.6 Ma on the southwestern flank and ca. 21 Ma on the northeastern flank. As shown by a northeastward decrease in 40 Ar/ 39 Ar muscovite dates from 22.4 to 20.2 Ma, ductile normal-sense displacement within the Zanskar shear zone ended by ca. 22 Ma, after which the Gianbul dome was exhumed as part of a rigid footwall block below the brittle Zanskar normal fault, tilting an estimated 5°–10°SW into its present orientation.

Switch from thrusting to normal shearing in the Zanskar shear zone, NW Himalaya: Implications for channel flow

Research Article| July 01, 2014 Switch from thrusting to normal shearing in the Zanskar shear zone, NW Himalaya: Implications for channel flow Melanie Finch; Melanie Finch † 1School of Geosciences, Monash University, Clayton, Victoria 3800, Australia †E-mail: melanie.finch@monash.edu Search for other works by this author on: GSW Google Scholar Pavlína Hasalová; Pavlína Hasalová 1School of Geosciences, Monash University, Clayton, Victoria 3800, Australia2Centre for Lithospheric Research, Czech Geological Survey, Klárov 3, 118 21 Prague 1, Czech Republic §Current address: Centre for Lithospheric Research, Czech Geological Survey, Klárov 3, 118 21, Prague 1, Czech Republic. Search for other works by this author on: GSW Google Scholar Roberto F. Weinberg; Roberto F. Weinberg 1School of Geosciences, Monash University, Clayton, Victoria 3800, Australia Search for other works by this author on: GSW Google Scholar C. Mark Fanning C. Mark Fanning 3Research School of Earth Sciences, Australian National University, Mills Road, Canberra, ACT 0200, Australia Search for other works by this author on: GSW Google Scholar GSA Bulletin (2014) 126 (7-8): 892–924. https://doi.org/10.1130/B30817.1 Article history received: 07 Nov 2012 rev-recd: 09 Aug 2013 accepted: 22 Nov 2013 first online: 08 Mar 2017 Cite View This Citation Add to Citation Manager Share Icon Share Facebook Twitter LinkedIn MailTo Tools Icon Tools Get Permissions Search Site Citation Melanie Finch, Pavlína Hasalová, Roberto F. Weinberg, C. Mark Fanning; Switch from thrusting to normal shearing in the Zanskar shear zone, NW Himalaya: Implications for channel flow. GSA Bulletin 2014;; 126 (7-8): 892–924. doi: https://doi.org/10.1130/B30817.1 Download citation file: Ris (Zotero) Refmanager EasyBib Bookends Mendeley Papers EndNote RefWorks BibTex toolbar search Search Dropdown Menu toolbar search search input Search input auto suggest filter your search All ContentBy SocietyGSA Bulletin Search Advanced Search Abstract The Zanskar shear zone is a ductile, normal-sense shear zone that exploited the contact between the High Himalayan Crystalline series and the Tethyan sedimentary series. The Zanskar shear zone is an extension of the South Tibetan detachment system with similar timing and nature, and, in Zanskar, it accommodated 24 km of normal movement. Early thrusting is preserved in the footwall and hanging wall and is overprinted by normal shearing. Thrusting and normal shearing were coplanar and codirectional, with SW-directed thrusting overprinted by NE-directed normal shearing—a simple inversion of movement sense. The telescoped isograds related to normal shearing define a broad pattern of colder rocks on top of hotter. However, we found preserved thrust-related metamorphic series, with hotter rocks on top of colder, severely telescoped by normal shearing. Some determinations of the amount of displacement and thinning on the Zanskar shear zone prior to the current work have assumed a steady-state crustal profile and have disregarded preexisting perturbations of isograds such as those indicated here. Miocene leucogranitic intrusions accumulated within and below the normal Zanskar shear zone. Intrusions were sheared during thrusting and normal movement, and magmatism outlasted normal shearing. We have dated monazites by U-Pb sensitive high-resolution ion microprobe (SHRIMP) from leucogranite samples that were sheared by the thrusting event, by the normal movement event, and those that postdate all shearing. Results constrain the timing of the switch from thrusting to normal movement to between 26 and 24 Ma and ca. 22 Ma. At ca. 20 Ma, normal shearing in Zanskar shear zone was no longer active, and magmatism was waning, producing late, undeformed leucogranitic dikes. Taking into account the shear zone thickness of 0.83 km, the maximum duration of normal movement of 6 m.y., and the estimated strain of γ = 28.6, we estimate the lower bound of strain rate for the Zanskar shear zone to be 1.5 × 10–13 s–1. Given the short duration of the normal shearing event and magmatism, we find little support for the hypothesis of channel flow in Zanskar. We propose instead that Miocene anatexis weakened the midcrustal levels and caused the switch from thrusting to normal movement, doming, and cooling of the anatectic core of the High Himalayan Crystalline series. You do not have access to this content, please speak to your institutional administrator if you feel you should have access.

Miocene magmatism and tectonics within the Peri-Alboran orogen (western Mediterranean)

The aim of this paper concerns Miocene igneous activity in the Alboran Sea and Peri-Alboran area (northern Morocco, western Algeria and Betic Cordilleras in Spain), considering its age and its location with regard to major tectonics structures.We have compiled previous K-Ar isotopic ages of lavas and plutonic boulders and intrusives with an error of ±1σ and completed this set by a new K-Ar isotopic age for andesitic tuffites from Alboran Island. Geochemistry of most of these samples has been considered after previous analyses completed with new data for Spain magmatism. These two sets of data allow us to place the magmatic activity within the regional stratigraphy and tectonics and their chronological framework of the three major tectonic phases of the Maghrebian orogen, at 17Ma (Burdigalian), 15Ma (Langhian) and 9Ma (Tortonian). Petro-geochemical characteristics are compared through time and geographical locations. A major goal of this coupled approach is to help the elaboration of possible geodynamical processes.As an application, we present the case study of the Dellys, Djinet and Thenia region (east of Algiers) where the successive magmatic events between 19.4±1 and 11.6±0.5Ma are closely related to the local tectonics and sedimentation.The Peri-Alboran igneous activity is placed in a multidisciplinary framework. Timing of activity is defined according to the ages of the neighbouring sedimentary units and the K-Ar ages of igneous rocks.In Spain, the Cabo de Gata-Carboneras magmatic province displays late Oligocene and early Miocene leucogranitic dikes, dated from 24.8±1.3 to 18.1±1.2Ma; three following andesitic to rhyolitic events took place around 15.1±0.8 to 14.0±0.7Ma, 11.8±0.6 to 9.4±0.4Ma, 8.8±0.4 to 7.9±0.4Ma; this last event displays also granitic rocks. Lamproitic magmas dated between 8.4±0.4 and 6.76±0.04Ma were emplaced after the Tortonian phase.In Morocco, after the complex building of the Ras Tarf volcanic edifice, major calc-alkaline to shoshonitic volcanoes were built between 9.0±0.5 and 4.8±0.5Ma, in particular the large Gourougou volcanic complex. Near Oujda, volcanic activity of alkaline affinity leads to multiple emissions of basalts throughout Pliocene times until the beginning of Pleistocene, between 6.2±0.3 and 1.5±0.1Ma.In the Alboran domain, an age of 19.7±0.8Ma is reported (this study) for the andesitic tuffites that form the emergent part of the Alboran Island. This age is comparable to that of the Algerian tuffites and cherts “silexites” and the Malaga ones in Spain. Younger activity, completely separated from the previous one, forms the low-K basaltic andesitic dikes from Alboran Island, dated between 9.1±0.5 and 7.5±0.3Ma. Along the Alboran Ridge both low-K and high-K andesites to dacites were emitted in the estimated range of 10.7–8.7Ma. Low-K and high-K andesites to dacites sampled at ODP sites 977 and 978 into the East Alboran Basin, are dated between 12.1±0.2 and 9.3±0.1Ma.We propose to relate with the Trans-Alboran lineament only the post-Tortonian igneous activity younger than 9Ma.

Timescales of partial melting in the Himalayan middle crust: insight from the Leo Pargil dome, northwest India

The Leo Pargil dome (LPD) in northwest India exposes an interconnected network of pre-, syn-, and post-kinematic leucogranite dikes and sills that pervasively intrude amphibolite-facies metapelites of the mid-crustal Greater Himalayan sequence. Leucogranite bodies range from thin (5-cm-wide) locally derived sills to thick (2-m-wide) crosscutting dikes extending at least 100 m. Three-dimensional exposures elucidate crosscutting relations between different phases of melt injection and crystallization. Combined laser ablation inductively coupled plasma mass spectrometry U–Th/Pb geochronology and trace element analysis on well-characterized monazite grains from nineteen representative leucogranites yields a large, internally consistent data set of approximately 700 U–Th/Pb and 400 trace element analyses. Grain-scale variations in age correlate with trace element distributions and indicate semi-continuous crystallization of monazite from 30 to 18 Ma. The youngest U–Th/Pb ages in a given sample are consistent with the outcrop-scale crosscutting relations, whereas older ages within individual samples record inheritance from partially crystallized melt and source metapelites. U–Th/Pb isotopic and trace element data are incorporated into a model of melting within the LPD that involves (1) steady-state equilibrium batch melting of compositionally homogeneous metapelitic sources; (2) pulses of increased melt mobility lasting 1–2 m.y. resulting in segregation of melt from its source and amalgamation into mixed magmas; and (3) rapid emplacement and final crystallization of leucogranite bodies. Melt systems in the LPD evolved from locally derived, in situ melt in migmatitic source rocks into a vast network of dikes and sills in the overlying non-migmatitic host rocks.