Internode Length Research Articles

Identifying genetic determinants of forage sorghum [Sorghum bicolor (Moench)] adaptation through GWAS

BackgroundForage sorghum is a highly valued crop in livestock feed production due to its versatility, adaptability, high productivity, and resilience under adverse environmental conditions, making it a crucial option for sustainable forage production. This study aimed to investigate ninety-five forage sorghum genotypes and identify the marker – trait associations (MTAs) in adaptive traits, including yield and flowering through genome-wide association studies (GWAS).ResultsUsing 41,854 polymorphic SNPs, a GWAS involving the GLM, MLM, and FarmCPU models was performed to analyse fourteen adaptive traits. The population structure revealed the presence of two subpopulation groups. Linkage disequilibrium (LD) plots showed varying degrees of LD decay across the chromosomes, with an average LD decay of 19.49 kbp. Twelve common significant QTNs, encoding 17 putative candidate genes, were simultaneously co-detected and studied by at least two or more GWAS methods. Three QTNs were associated to days to 50% flowering; two each to leaf-to-stem ratio and number of nodes per plant; and one each to plant height, leaf width, number of leaves per plant, stem girth, and internodal length. Six candidate genes were associated with days to 50% flowering, two each with leaf width, stem girth, leaf-to-stem ratio, and number of nodes per plant, and one each with plant height, number of leaves per plant, and internodal length.ConclusionFarmCPU was identified as the most suitable and effective among all the models for controlling both false positives and false negatives. Further in-depth analysis of the newly discovered QTNs may lead to the identification of new candidate genes for the trait of interest. These studies elucidate gene functions and could transform forage sorghum breeding through marker-assisted selection and transgenic approaches, accelerating the development of superior forage sorghum varieties and enhancing global food security.

Genetic diversity of local sweet potato cultivars (Ipomoea batatas [L.] Lam.) from Bulungan, North Kalimantan based on morphological characters

Indonesia is one of the centers of sweet potato diversity worldwide. Sweet potatoes have the potential to be developed for food consumption. This research aims to determine the diversity of sweet potato cultivars, their morphological characteristics, and the relationships between local sweet potato cultivars in Bulungan Regency, North Kalimantan. The local sweet potato cultivars were selected using purposive sampling with the exploration method. The morphological characterization of the samples is based on IBPGR (International Board for Plant Genetic Resources) standards. Cluster analysis was conducted to identify the relationships using MVSP software version 3.1. The research identified 27 local sweet potato cultivars in Bulungan Regency. Morphological characterization revealed 41 characters that can differentiate each local sweet potato cultivar. The most influential characteristics include leaf shape, flower surface texture, the position of the stigma, flower surface color, back petal color, center shape and the number of lobes, primary leaf vein color, lobe type, main leaf bone color, stem internode length, and plant type. A flower shape that had not been discovered before, a pentagonal shape with curves, was identified. Cluster analysis divided the cultivars into two major groups with a coefficient range of 0.593 to 0.888 (59.3 to 88.8%). Cluster A consisted of one member, LK-7 (purple sweet potato), while Cluster B consisted of several subgroups with 26 local cultivars. The people of Bulungan Regency use these local cultivars for food, animal feed, and medicinal purposes.

Growth regulation in bread wheat via novel bioinoculant formulation

Wheat (Triticum aestivum L.) is one of the most significant crops and the backbone of food security worldwide. However, low wheat production remains a substantial concern in global agricultural systems. It can be attributed to several factors, including adverse climatic conditions, plant disease and poor soil quality. Recent efforts have explored bioinoculant applications as a promising approach to enhance wheat yield, trying to mitigate constraints essential for future wheat production and global food security. This study tested talc powder, wheat biochar, sugarcane bagasse biochar, and farmyard manure as carriers with two endophytic bacterial strains, Burkholderia phytofirmans PsJN and Bacillus spp. MN54 was applied to three wheat varieties (Ujala-16, Zincol-16, and Fathejang-16). The data was recorded at the seedling and maturity growth stages of plants. A pot experiment revealed significant improvements in plant growth following bioinoculant application compared to controls. Notably, the combination of sugarcane bagasse biochar with Bacillus sp. MN54 exhibited the most pronounced effects, promoting internodal length, spike length, tiller number per plant, grain yield per plant, and spikelets per spike. Additionally, talc powder with Bacillus sp. MN54 increased peduncle length, tiller number per plant, and spike length in Fathejang-16. These findings offer valuable insights into optimizing bioinoculant formulations for improved agricultural practices, adapting to climate change, and contributing to ensuring global food security.

SSR markers based QTL mapping and genetic analysis for yield and yield-attributing traits in bitter gourd (Momordica charantia L.)

The present study was conducted for QTL mapping for yield and other yield attributing traits in bitter gourd using Simple Sequence Repeat (SSR) markers. A total of 630 SSR markers were screened for polymorphism in two contrasting parents (DBGS-2 and Pusa Purvi), out of which only 35 were polymorphic. F1 plants (10 individuals) in which hybridity was ascertained (using these polymorphic markers); were further employed for development of mapping population (F2) consisting of 120 plants. Higher variation was present in the mapping population as evident from the wider range value of the characters. Continuous frequency distribution classes combined with bell-shaped, symmetrical normal distribution curve, revealed the quantitative inheritance nature of the traits studied. Higher PCV than the GCV for all the traits, along with high difference between the PCV and GCV for majority of traits indicated higher influence of environment in expression of these traits in the mapping population. Presence of transgressive segregation was also noted for majority of the traits. Amongst the various linkage groups (LG), LG 4 had the maximum number of markers, covering 171.07 cM map distance. LG4 also possessed the maximum number (nine) of QTLs while LG1 had six. QTL mapping using polymorphic SSRs resulted in detection of a total of 28 QTLs for fourteen traits viz. yield per plant (kg), earliness or flower related traits (node to first female flower, node to first male flower, days to first male flower, male to female flower ratio), fruit traits (fruit number per plant, fruit diameter (cm), fruit length/ diameter ratio, pericarp thickness (mm) and number of seed per fruit) and vegetative traits (internodal length (cm), number of primary branches, leaf width (cm), length and width ratio). The LOD score of these QTLs ranged from 3.01 to 64.47, the total phenotypic variances (PVE) ranged from 1.52 to 34.57 % and additive effects ranged from –3.69 to 17.07. Of the total, nineteen were major QTLs, having PVE >10 %. Three QTLs were detected for yield per plant while a total of seven for the traits imparting earliness viz. days to first male flower, node to first female flower and node to first male flower. Amongst all the QTLs detected, qFrtLDR-4-1 (K) had the maximum LOD (64.47) and PVE (34.57 %) value. Two hotspots were detected with multiple QTLs clustered in the LG 1. The first hotspot possessed four QTLs [qLfW-1-1, qMFR-1-1 (K), qSPF-1-1, qNFmlF-1-1 (K)] while the second had two related to yield per plant [qYldpl-1-1 (K) and qYldpl-1-1]. Many of these QTLs are also being reported for the first time in bitter gourd. The findings of the present study can be used to fasten the bitter gourd improvement by utilizing these in MAS, DNA fingerprinting, genetic mapping, genomics analysis etc.

MdILL6 regulates xylem and vessel development to control internode elongation in spur-type apple.

Spur-type varieties play an important role in facilitating high-density plantings. However, the underlying mechanisms of internode elongation in spur-type varieties are poorly understood. In this research, we investigated the morphological phenotype of annual shoots in four spur-type varieties ('Miyazak', 'Jinfu 18', 'Yanfu No. 6', and 'Liquan spur') and four standard-type varieties ('Aomorifu', 'Shou Fuji', 'Yanfu No. 10', and 'Yanfu No. 3'). Compared with standard-type varieties, spur-type varieties had a shorter shoot length, an average internode length and a smaller xylem size. The content of Jasmonic acid (JA) and Jasmonic acid isoleucine (JA-Ile) significantly increased in spur-type varieties, accompanied by an increase in the expression of JA biosynthesis and signal transduction genes. Exogenous methyl jasmonate (MeJA) inhibited plant height, xylem size, and vessel area. Additionally, we identified an IAA-Leucine Resistant1-like Hydrolase family member, MdILL6, which was highly expressed in spur-type varieties and mature stems. MdILL6 was mainly expressed in the shoot tips and stem, and its protein was located on the endoplasmic reticulum. Overexpression of MdILL6 in apple inhibited plant height and average internode length by decreasing xylem size and vessel area. Our results revealed a molecular mechanism of spur-type variety development affected by the JA pathway and suggest strategies for genetic improvement and regulation of spur-type varieties.

PHENOTYPIC DIVERSITY OF SWEET POTATO (IPOMOEA BATATAS[L.]LAM.) GERMPLASMUSING QUANTITATIVE TRAITS: A PRE- BREEDING STUDY IN TOGO

Objective: Sweet potato is a root and tuber crop which contribute to food security in Togo. However, little scientific data exists on the genetic variability of cultivars grown in Togo, although this information is a prerequisite for development of new varieties. The objective of this study was to explore the phenotypic diversity within Togos sweet potato cultivars. Materials and Methods: The germplasm is composed of sixty five (65) cultivars from Togo and sixteen (16) exotic varieties introduced from Burkina Faso breeding unit. The experiment was laid out in a 9 x 9 lattice square design with three replicates. In total, sixteen (16) quantitative traits were evaluated using the sweet potato ontology as described by CIP. Results:Descriptive statistics, ANOVA and PCA revealed high variability for traits such as root yield, dry matter content, aboveground biomass, stem length, internode length and stem diameter. Cluster analysis performed on the basis of the Euclidean distance between cultivars using Ward method as aggregation criterion has revealed four phenotypic clusters. Clusters I and II are composed of varieties with low root yield (12.95 and 15.87 t.ha-1) and high dry matter content (29.68 and 26.86%). Clusters III and IV are made of varieties exhibiting high aboveground biomass (37.74 and 50.75 t.ha-1), high fresh root yield (16.06 and 20.18 t.ha-1) and low dry matter content (24.62 and 23.84%). The variability observed in this gene bank constitutes a basis for genetic improvement programmes of sweet potato in Togo.

Evaluation of selected rice cultivars' phenotypic traits and chlorophyll content under sub-mergence stress

Currently, rice production in Nigeria is on the increase with the aim of meeting the nation’s need but floods (mainly seasonal) has been among the major factors limiting rice production. Rice is generally a semi aquatic plant well adapted to partially flooded fields but flash flooding may leads to complete submergence there by resulting into huge economic losses mainly due to reduction in gases (hypoxia) and light intensity needed for photosynthesis. The research was conducted at the Biological Garden, Department of Biological Sciences, Federal University Birnin Kebbi. The experiment was set off in a Completely Randomized Design (CRD) consisting of four rice cultivars with control and three replications. Length of internodes, number of nodes per plant, plant height, root length and chlorophyll contents were evaluated using standard methods and protocols. The study analyzed the impact of flooding on rice cultivars, finding significant differences in node number, internode length, plant height, root lengths, and chlorophyll content. The highest number of nodes was found in CP Yartunga, followed by Faro with 6.33 per plant. The highest plant height was 15.50 cm in Faro, while the highest chlorophyll content was 0.41 mg/g in CP 44. The research reveals that rice cultivars recover from flooding stress, with CP Yartunga having the highest number of nodes per plant and Faro having the highest internode length. No significant differences were found in plant height, root length, or chlorophyll content among the evaluated cultivars. Faro had the lowest chlorophyll content. The study reveals that under stress, chlorophyll content in various locations decreases significantly, with a significant drop in recovery and node numbers. Lastly, node recovery is substantial, suggesting lower injury levels. The present study suggests that cultivars like Faro and CP 44 show better resilience, suggesting potential breeding programs focusing on structural traits.

Optimization of trellis design and height for double-season hop (Humulus lupulus L.) production in a subtropical climate: Growth, morphology, yield, and cone quality during establishment years

Photoperiod manipulation using supplemental lighting enables double-season production of hops (Humulus lupulus L.) under subtropical climatic conditions. In Florida, United States, the spring growing season (Spring) is from February to June, and the fall growing season (Fall) is from June to November. To develop the optimum trellis for this unique hop production system, we examined the effects of two trellis designs (straight trellis and V-trellis) and three trellis heights (3.7, 4.6, and 5.5 m) on growth, morphology, yield, and cone quality of 'Cascade' hops grown in west central Florida. The straight trellis had two twines per hill installed on a top middle cable, whereas the V-trellis had four twines per hill installed on two top parallel cables. We trained 16 bines per hill for both trellises. Data were collected during establishment years: Year 1 and Year 2. Yield showed significant season × trellis height interaction effects. Surprisingly, yield was highest in Year 1 Spring and decreased by 45–74 % in the subsequent seasons. Increasing trellis height from 3.7 to 5.5 m increased yield by 78–215 %. On average, the V-trellis produced 24 % higher yield than the straight trellis. The 5.5-m V-trellis produced the highest annual yield of 1807 kg ha–1 in Year 1. Yield had a significant positive correlation with stem dry weight in Year 1 Spring and Year 2 Spring, but it had no significant correlation with bine number per hill, stem diameter, and internode length in any season. Cone quality showed significant seasonal variations. Total α acid concentration decreased from Spring to Fall in both years and recorded the highest value in Year 2 Spring. Similarly, total essential oil content was highest in Year 2 Spring. Except in Year 2 Fall, total α acid concentration (5.35–8.25 %) was within or above the normal range for ‘Cascade’. Compared to these seasonal variations, trellis design and height effects on cone quality were relatively small. These results suggest that, during establishment years, adopting a V-trellis design and increasing trellis height can maximize yield in subtropical hop production without compromising overall cone quality. Ongoing research will validate these findings in mature hop plants.

Managing earliness and yield of cotton by modulating plant population, foliar boron feeding and mepiquat chloride application

ABSTRACT Early maturity and simultaneous increase in yield of cotton are pivotal for increasing the productivity of cropping systems involving cotton. Current two-year study was performed to simultaneously enhance the earliness and yield of cotton by modulating plant population (PP) (5.3 and 8.8 plants m−2), foliar boron (B) (0, 0.6 and 1.2 g/L B) and 0.07 g/L mepiquat chloride (MC) solution (at squaring and flowering stages) application. Internodes length was exalted at high PP (8.8 plants m-2) and B (1.2 g/L B), while declined by MC. Nevertheless, nodes above the white flower and cracked boll were decreased at high PP, and the application of B and MC indicated earlier cutout. Similarly, high PP, and application of 1.2 g/L B and MC at squaring reduced calendar and thermal time needed for flowering and boll opening. The boll maturation period was not affected by the application of B and MC but declined at high PP. Earliness index, production rate index (PRI) and seed cotton yield were increased at high PP, application of 1.2 g/L B and MC at squaring. In crux, increasing PP and B concentration, and MC application at squaring resulted in early maturity and enhanced seed cotton yield by modulating plant structure and time required for various phenophases.

The inheritance pattern for the dwarf phenotype in hybrids from crosses among sunflower lines differing in alleles of the Rht1 locus

Background. Sunflower seed production is based on utilization of the heterosis effect, manifesting itself in improving both yield and plant height in hybrids. Short-stemmed lines need to be used to develop commercial hybrids with an optimum height. Molecular bases of the trait manifestation in the dwarf lines from VIR’s sunflower genetic collection have not yet been studied. Materials and methods. The material included 27 short-stemmed and 10 tall sunflower lines from VIR’s genetic collection, as well as the F1 and F2 hybrid generations derived from crossing the tall (VIR 340) and dwarf (VIR 171) genotypes. The parental lines and hybrids were phenotyped for plant height, leaf number, and internode length. Genotyping for the Rht1 locus (HaDella1 candidate gene), encoding the negative regulator of the gibberellin response, the DELLA protein, was performed using the developed CAPS marker. Results. The average plant height in the VIR 340 line over a three-year study was 162 cm, the number of leaves 29, and the internode length 6 cm. The VIR 171 line demonstrated the plant height of 66 cm, leaf number of 24, and internode length of 2.8 cm. The F1 hybrids were uniform, with the height of 180–190 cm, that indicated the dominance of the long stem trait. Analyzing the segregation in the F2 hybrid generation led to an assumption admitting the digenic control of the dwarf phenotype in the VIR 171 line. The CAPS marker G-D-1/ Bmt I was developed to identify a missense mutation T>C in the first exon of the HaDella1 gene, which results in the substitution of leucine with proline in the DELLA motif. Using the marker, the mutant Rht1 allele was identified in the VIR 171 and VIR 434 dwarf lines, similar in their origin and phenotype. The results of validation in the F2 hybrid population (VIR 340 × VIR 171) confirmed the efficiency of the G-D-1 / Bmt I marker for selecting dwarf genotypes homozygous for the Rht1 mutant allele.

Vegetative growth, flowering pattern and yield of mango (Mangifera indica L.) as affected by exogenous application of paclobutrazol and KNO3

Studied the response of different flowering regulatory agro-chemicals had a significantly positive impact on vegetative growth, flowering pattern and yield attributes of mango, during 2015-16 and 2016-17. Paclobutrazol is associated with a shorter internodal length and the highest flowering intensity. The study was laid out with 7 treatments in randomized block design and replicated thrice were applied on north Indian mango cultivars "Dashehari" and "Kesar" under the Banswara condition of Rajasthan. The results revealed that most of the flowering parameters were better performed with paclobutrazol @ 3.0 ml m-2 soil drench application mid-September (number of flowers/10 tagged panicle, per cent hermaphrodite flowers, per cent fruit set, least length and width of panicle) and foliar application of potassium nitrate 25 g l -1 observed maximum height and width of panicle, fruit weight, yield kg tree-1, yield t/ha.

Morphological Assessment of Drought Stress Tolerant Soybean Genotypes in Bangladesh

Soybean (Glycine max (L.) Merr) is the most important commercial grain legume and oil seed crop which represents the most important plant source of vegetable oil and protein in the world. The water stress tolerance of the fifty soybean genotypes was evaluated in a glasshouse at the Bangladesh Institute of Nuclear Agriculture (BINA). The study was carried out to identify the drought tolerant soybean genotype(s) for improving yield under rainfed conditions in Bangladesh. Drought stress was induced by withholding water completely from 21 days after emergence. The water stress was continued until wilting symptom persisted on plant overnight. Water stress caused an overall reduction in some morphological and yield contributing characters such as plant hight, number of branches plant-1, internode length, pod plant-1, seeds pod-1, hundred (100) seeds weight and finally the seed yield of soybean. The studied genotypes were categorized into four groups based on their yield reduction under drought stress conditions. Five genotypes YESOY-4, PK-416, Shohag, SBM-09 and Binasoybean-6 were categorized as tolerant (<35% yield reduction), fourteen genotypes were categorized as moderately tolerant (35%-60% yield reduction), twenty five genotypes were categorized as moderately susceptible (61%-80% yield reduction) and rest six genotypes were categorized as susceptible (>80% yield reduction). These five genotypes YESOY-4, PK-416, Shohag, SBM-09 and Binasoybean-6 study further for developing drought tolerant soybean verities which may be helpful for quality oil seed production.

Assessment of genetic diversity by phenological traits, field performance, and Start Codon Targeted (SCoT) polymorphism marker of seventeen soybean genotypes (Glycine max L.).

The Egyptian-farmed soybeans have a wide range of genetic diversity which is most important in plant improvement programs in order to develop new higher yielding soybean genotypes. The present study is designed to determine the genetic variability among seventeen genotypes of cultivated soybean (Glycine max L.) by examining the phenotypic level at the seedling stage, field performance over two years 2022/2023 and genetically using Start Codon Targeted (SCoT) markers. Results indicated that the SCoT markers, 100 seed weight, and tip angle (TA) traits were positively correlated with H2L12, DR 101, H15L5, and H117 genotypes. In addition, the number of branches per plant and plant height were associated with H113, H32, Crowford, H129, and D7512035. Furthermore, the length of the first internode (LFI), root width (RW), root length (RL), and shoot length (SL) were more associated with Giza 111, NC105, and Hutcheson. The hierarchical cluster analysis (HCA) and its associated heatmap explored the differences among the genotypes. It showed that all examined parameters were clustered into four distinct clusters. The obtained results showed that genotypes NC105, H30, D75_12035, and H2L12 have promising phenological and morphological traits besides tracking the inheritance of nearby genes surrounding the ATG translation start codon since they are in a monoclades. The obtained results will help the breeder plan appropriate selection strategies for improving seed yield in soybeans through hybridization from divergent clusters.

Determining factors for the selection of soybean cultivars and the cause and effect relationships with grain yield

The objective of the present study was to apply the trail analysis model to extract the cause and effect action on soybean grain yield as a function of agronomic attributes. The present study was developed in the agricultural years of 2023 and 2024. The experimental design used was strips with randomized blocks, consisting of 10 cultivars and five replications. Through the means comparison test, the highest grain yields were observed in the cultivars C 2531 E, BMX Vênus CE, B 5595 CE and NEO581 CE. It was observed that in addition to the higher grain yield, the cultivar C 2531 CE also presented a higher grain weight per plant, despite having the lowest final plant height and productive zone height among the cultivars. As for BMX Vênus CE, it was observed that despite its medium height, it presented a shorter internode length on the main stem, which optimized the number of total nodes on the main stem, in addition to presenting a high grain weight per plant. Cultivar B 5595 CE can be highlighted for its greater final plant height, as well as greater height of the productive zone, promoting a greater number of total nodes on the main stem. Another highlight of this cultivar is the high number of plants per final linear meter, indicating its adaptability in the field. The cultivar NEO581 E, despite having one of the smallest heights among the cultivars, presented one of the highest grain yields, which can be attributed to the stability of the cultivar in the field, as it showed intermediate performance for all agronomic traits.

Heavy Metals Analysis of Breweries Effluent used in Soil Cultivated with Glycine Max (L.) Merr. Accessions with Biochar Augmentation

Beer production has promulgated the prevalence of heavy metal contamination in the environment (soil and water bodies). The magnitude of breweries wastewater-effluent effect discharged on soil and its effect on crop quality in terms of growth and physiology must therefore be investigated. This study aims to assess the level of seven heavy metals (HM) (lead (Pb), nickel (Ni), chromium (Cr), copper (Cu), cadmium (Cd), zinc (Zn) and iron (Fe)) in breweries wastewater-effluent and its effect on the growth of Glycine max accessions (TGM-3990, TGM-1348, TGM-1732, TGM-2175 and TGM-928) as well as the influence of biochar soil amendment in the induction of HM tolerance in G. max. Effluent properties were analyzed using the A1 portable TDS/EC meter. HM in the wastewater-effluent was determined using Atomic Absorption Spectrometer (AAS). The experiment was set up in a complete block design. 3 seeds G. max accessions were planted in 7kg of sterilized soil (control, effluent and biochar treatments). Growth parameters were taken using standard methods, while the total photosynthetic pigments (TPP) were determined using the atLeaf chlorophyll meter. The wastewater-effluent recorded an electrical conductivity (EC) of 928µS/cm, total dissolved solids (TDS) (464ppm), Temperature (31.9-32.6°C) and pH (5.37). Results for HM concentration showed; Pb (0.20mg/L), Ni (<0.001mg/L), Cr (0.03mg/L), Cu (<0.001mg/L), Cd (<0.001mg/L), Zn (<0.001mg/L) and Fe (8.74mg/L). The trend shows that Fe˃Pb˃Cr˃Cd˃Cu˃Ni˃Zn. Cr, Cd, Cu, Ni and Zn were significantly below the World Health Organization (WHO) and Waste Water Forum (WWF) permissible limit, while Fe and Pb significantly higher. G. max accessions TGM-928 (80%) and TGM-3990 (80%) had better germination percentage (GP), TGM-1348 (60%) had the lowest GP, while TGM-2175 recorded no germination in all treatments. At 6 weeks after planting (WAP), it was observed that irrigation of G. max accessions with breweries wastewater-effluent significantly (p=0.001) stimulated growth parameters such as shoot length for TGM-3990 which recorded; Treatment=19.53±0.94cm; Control=17.10±0.67cm; Biochar=40.83±1.01cm) while TGM-1732 had the highest shoot growth (T=38.57±1.53cm; C=25.00±0.00cm; B=82.33±5.70cm) when compared to their controls. TGM-3990 (T=32.20mg/kg, C=34.10mg/kg, 43.30mg/kg) recorded the least TPP contents, while TGM-928 (T=51.00mg/kg, C=45.60mg/kg, B=43.50mg/kg) recorded the highest TPP in all treatments. Amelioration of soil with biochar significantly (p=0.001) stimulated growth above the effluent treatment and control. Similar trend was observed for leaf area, petiole length, leaf number, stem girth and internode length. This study has shown that breweries effluent has the potential of growth enhancement in G. max cultivation and in combination biochar application reduces the need for additional fertilizer application.

Natural geometrical variations of Italian Phyllostachys edulis bamboo culms for construction purposes

Amid the increasing scarcity of raw materials, utilizing bamboo as a renewable building material offers significant environmental and economic benefits for the European construction sector. However, in Europe, the use of bamboo for construction remains limited due to a lack of studies on geometrical and material characteristics of European-cultivated bamboo species. Although bamboo is not typically grown in Europe, the number of bamboo plantations is steadily increasing in countries like Spain, France and Italy. Bamboos growing in temperate climates, however, are exposed to different environmental conditions during growth compared to bamboos from subtropical and tropical climates, such as those in China or Vietnam. As bamboo’s geometric properties are strongly influenced by the environmental conditions during growth, it is essential to investigate how bamboo culms of the same species grown in Europe compare to those from other regions. The present article reports findings on the geometry and geometric imperfections of 90 four-meter Italian bamboo culms. First, the Italian Phyllostachys edulis bamboo culms examined in this study are briefly introduced. Following, geometric imperfections of bamboo culms are defined, and the geometry measurement concept is presented. Subsequently, variations in internode lengths, diameters, wall thicknesses, ovalities, stem tapers and pre-deflections are described and analyzed. Finally, the findings from the Italian culms are compared with those from Asian Phyllostachys edulis. In summary, this article enhances the understanding of the geometric properties of bamboo grown in Europe, thereby advancing the use of cultivated bamboo culms in Europe and improving the overall understanding of bamboo characteristics across different climatic zones.

Identification of quantitative trait loci for lodging and related agronomic traits in soybean (Glycine max [L.] Merr.)

BackgroundLodging, a crucial agronomic trait linked to soybean yield, poses a significant challenge in soybean production. Nevertheless, there has been less research on soybean lodging compared to other important agronomic traits, hindering progress in breeding high-yield soybeans. Our goals were to investigate lodging, pinpoint quantitative trait loci (QTL) linked to lodging, and forecast potential candidate genes linked to this trait. To achieve this, we employed a recombinant inbred line (RIL) population derived from a cross between Guizao 1 and B13 (GB) across various environments.ResultsThe lodging score of the RIL population was found to be significantly positively correlated with flowering time, maturity time, plant height, number of main stem nodes, stem diameter, and internode length, with correlation coefficients ranging from 0.457 to 0.783. A total of 84 QTLs associated with soybean lodging and related traits were identified using the GB population. The contribution of phenotypic variance ranged from 1.26 to 66.87%, with LOD scores ranging from 2.52 to 69.22. Additionally, within these QTLs, a stable major QTL associated with lodging was newly discovered in the GB population. Out of the ten major QTLs associated with other related traits, nine of them were situated within the qLD-4-1 interval of the major lodging score locus, displaying phenotypic variations ranging from 12.10 to 66.87%. Specific alterations in gene expression were revealed through the analysis of resequencing data from the two parental lines, potentially indicating their significant roles in lodging. Subsequently, it was determined through qRT-PCR that four genes are likely to be the major genes controlling soybean lodging.ConclusionsThis study’s findings offer valuable insights into the genetic underpinnings of soybean lodging resistance traits. By comprehending the potential genetic factors associated with lodging, this research lays the groundwork for breeding high-yield soybeans with improved lodging resistance.

Gene pyramiding improved cell membrane stability under heat stress in cotton (Gossypium hirsutum L.)

Climate change has been drastically affecting cotton not only in Pakistan but also all over the world. Normally cotton is known as heat tolerant when compared with other crops, but if the high temperature occurs during flowering period the yield decreases significantly. Marker assisted gene pyramiding provides a sustainable solution to improve heat tolerance. A total of seven genotypes were developed by a series of crossing seven tolerant genotypes over the period of three years. Tolerant genotypes were selected by screening for important transcription factors (GHSP26, HSP3, HSFA2, DREB1A, HSP101, DREB2A, GhNAC2, HSPCB, GhWRKY41, TPS, GbMYB5, ANNAT8, GhMPK17, GhMKK1, GhMKK3, GhMPK2, HSC70, APX1 and GhPP2A1). The seven genotypes were evaluated under normal and heat stress in a multi-year trial. The traits related to heat tolerance, such as cell membrane stability, relative water content, excised leaf water loss, plant height, number of nodes, internodal length, number of buds, number of bolls and leaf area was observed under normal and heat stress conditions. The developed genotypes showed improvement in cell membrane stability and relative water content under heat stress. The genotypes [(VH-305×MNH-886)×MNH-1035)×NIAB-78)], [(MNH-1035×MNH-886)×MNH-886)×SM-431] and [(MNH-1035×MNH-886)×MNH-886)×SS-32] depicted heat tolerance and could be used as heat tolerant material for variety development in breeding programs.

Exploration of Biomass-related Genes in the FOX-superroot Lines of Lotus corniculatus and its Impact on Agronomic Traits

Background: Identifying biomass-related genes to meet the increasing demand for food supply is important approach for agricultural and scientific efforts. In this study, we employed the Full-length cDNA Over-eXpressing gene hunting system (FOX hunting system) to identify biomass-related genes through ectopic expression of Arabidopsis thaliana full-length cDNA in bird’s-foot trefoil (Lotus corniculatus). Methods: A total of 66 FOX superroot lines (FSLs) from Lotus corniculatus cv. Viking were transferred in vermiculite after two weeks in half-strength Murashige and Skoog (MS) medium. These FSLs were then grown in a growth chamber for four weeks, during which their plant length and root length were measured. High biomass lines were selected from this group. FSL #83 and #121 were then grown for an additional four months in a greenhouse until they reached maturity, at which point they were evaluated for their agronomic traits. Result: Out of the 66 analyzed FSLs, 15 displayed superior growth characteristics in plant length and total root length. Arabidopsis cDNA, categorized into genes related to various functions such as membrane transport, photosystems, phytohormone synthesis, amino acid synthesis and unknown genes, was introduced into these lines. Two lines were grown to maturity in the greenhouse and their agronomic traits were analyzed in detail. FSL #83 expressed brassinosteroid biosynthetic pathway gene (CPD) led to significant differences in internode length, number of stems, number of flowers and above-ground dry matter weight compared to non-transgenic Super-growing roots (SR). On the other hand, FSL #121 expressed Asparaginyl-tRNA synthetase (SYNC1) gene exhibited increases in plant length and the number of stem nodes.

Effect of GA3 and Nutrient Sprays on Growth of Kokum (Garcinia indica Choisy) Seedlings

An experiment was conducted at the College of Horticulture, Dapoli, during the year 2023 - 2024. The study was conducted using a Randomized Block Design with eight treatments, each replicated three times and the treatments included T1- GA3 @ 250 ppm, T2- GA3 @ 300 ppm, T3- GA3 @ 350 ppm, T4- 19:19:19 @ 0.5%, T5- 19:19:19 @ 1%, T6- 19:19:19 @ 2%, T7- 19:19:19 @ 2.5% and T8- Control with the aim to evaluate the influence of GA3 and nutrient sprays on the growth of kokum seedlings and to identify the optimal concentrations that would enhance growth and grafting success. The highest seedling height (28.53 cm), number of leaves (19.87), girth at collar region (3.44 mm) number of nodes (8.07) and internodal length (2.09 cm) were recorded in treatment T3 i.e. spraying with GA3 @ 350 ppm. The highest survival percentage of seedlings (96.00%), minimum number of days for obtaining 80 percent graftable seedlings (142.33 days), overall percentage of graftable seedlings (90.00%) and maximum percentage of graft success (94.82%) found in treatment T3.