Chain Length Research Articles

Perfluoroalkyl acid precursor or weakly fluorinated organic compound? A proof of concept for oxidative fractionation of PFAS and organofluorines.

Organofluorine mass balance approaches are increasingly applied to investigate the occurrence of per- and polyfluoroalkyl substances (PFAS) and other organofluorines in environmental samples more comprehensively. Usually, complex samples prevent the identification and quantification of every fluorine-containing molecule. Consequently, large unidentified fractions between fluorine sum parameters such as extractable organic fluorine (EOF) and the sum of quantified analytes are frequently reported. We propose using oxidative conversion to separate (unidentified) weakly fluorinated compounds (e.g., pesticides, pharmaceuticals) from PFAA-precursors (perfluoroalkyl chain lengths ≥ C6). We show with three organofluorine model substances (flufenamic acid, diflufenican, pantoprazole) that CF3-groups or aromatic fluorine can be quantitatively converted to inorganic fluoride and trifluoroacetic acid (TFA) by applying PhotoTOP oxidation (UV/TiO2). The principle of fluorine separation in mixtures is demonstrated by the oxidation of the three weakly fluorinated compounds together with the PFAA-precursor 6:2/6:2 fluorotelomer mercaptoalkyl phosphate diester (FTMAP). After oxidation, the products F- and TFA were separated from PFCAs (> C4) by SPE, and the fractions were analyzed individually. Closed mass balances both with and without the addition of organic matrix were achieved. Eventually, the fluorine balance was verified by total fluorine measurements with combustion ion chromatography (CIC). The proposed methods should be considered a proof of concept to potentially explain unidentified fractions of the EOF, especially if compounds with low fluorine content such as pesticides, pharmaceuticals, and their transformation products contribute largely to the EOF. Future studies are needed to show the applicability to the complexity of environmental samples.

Polysaccharide-based hydrogels for cartilage regeneration

Cartilage defect is one of the common tissue defect clinical diseases and may finally lead to osteoarthritis (OA) which threat patients’ physical and psychological health. Polysaccharide is the main component of extracellular matrix (ECM) in cartilage tissue. In the past decades, polysaccharide-based hydrogels have shown great potential for cartilage regeneration considering unique qualities such as biocompatibility, enhanced cell proliferation, drug delivery, low toxicity, and many others. Structures such as chain length and chain branching make polysaccharides have different physical and chemical properties. In this review, cartilage diseases and current treatment options of polysaccharide-based hydrogels for cartilage defection repair were illustrated. We focus on how components and structures of recently developed materials affect the performance. The challenges and perspectives for polysaccharide-based hydrogels in cartilage repair and regeneration were also discussed in depth.

Crowder Chain Length Variability and Excluded Volume Effect on the Phase Separation Behavior of Mucin.

Phase separation within cellular membranes, a critical process underpinning diverse cellular functions, is significantly influenced by transmembrane proteins. Therefore, elucidating the behavior of a transmembrane protein in its phase-separated state is of utmost importance. Our study explores mucin behavior in the cellular milieu, aiming to determine the role of crowder chain length and excluded volume in phase separation. Confocal microscopy images demonstrate the strong partitioning of mucin into the condensed phase influenced by hydrophobic and electrostatic interactions. Fluorescence recovery after photobleaching analysis revealed increased mobility in the presence of shorter chain length crowders, indicating the dynamic behavior of protein within condensed phases. Excluded volume calculation using the theoretical model emphasizes its importance in mucin phase separation under crowded conditions. Our findings underscore the ability of mucin to phase-separate under crowded conditions, highlighting the crucial role of excluded volume and enhancing our understanding of its involvement in cancer progression.

Intrinsic Synergy and Selectivity for the Inhibition of Cancer Cell Growth Generated by a Polymer Ligand of Proximal Enzymes.

A fundamental understanding of the design of polymer ligands of proximal enzymes is essential for the precise targeting of cancer cells, but it is still in its infancy. In this study, we systematically investigated the contribution of the chain length, ligand density, and ligand ratio of proximal enzyme-targeted polymers to the efficacy, synergy, and selectivity for the inhibition of cancer cell proliferation. The results revealed that employing a moderate chain length as a scaffold allowed for an intrinsically high efficacy and synergy of proximal enzyme-targeted polymers, in contrast to single enzyme-targeted polymers that prefer longer chain length for efficacy. The synergy obtained in proximal enzyme targeting was not provided by the combination of the corresponding small molecules. Moreover, the maturation of the synergistic efficacy of the proximal enzyme-targeted polymers also improved selectivity. This study proposes a rational design for polymer inhibitors and/or ligands for cancer cells with a high efficacy and selectivity.

Low-Foaming Nonionic Gemini Surfactants Containing Hydrophilic Poly(oxyethylene) Chain and Hydrophobic Di-tert-pentylbenzenes Groups.

Low-foaming nonionic gemini surfactants have a wide range of applications in industrial cleaning and photoresist development. In this study, three low-foaming nonionic gemini surfactants (S1, S2, and S3) with different poly(oxyethylene) chain lengths have been synthesized by using methoxy poly(ethylene glycol) and 2,5-di-tert-pentylhydroquinone. The chemical structures of the novel surfactants are confirmed by 1H NMR, Fourier transform infrared, and gel permeation chromatography (GPC), and their properties such as surface tension, wetting properties, emulsifying properties, and foaming properties are investigated. The surface tension values of S1, S2, and S3 at the critical micelle concentration are 40.29, 37.14, and 41.64 mN/m, exhibiting good surface activity. When the surfactant concentration is higher than 2 mM, the contact angles of S1 and S2 no longer change and can maintain 62 and 64°, showing good wetting properties. In addition, S3 can keep an emulsion state for 2 months at high concentrations, exhibiting good emulsion stability. Furthermore, all the prepared surfactants show good low-foaming properties. The initial foaming volumes of S1 are very low, less than 0.1 mL at various concentrations, less than 2% of the conventional surfactant sodium dodecyl sulfate. For S2, the initial foaming volumes at the concentration of 0.1, 1, 2, and 3 g/L are 1, 0.5, 0.55, and 0.45 mL, respectively. For S3, the initial foaming volumes show a general trend of increasing with concentration. The surfactants with longer poly(oxyethylene) chains possess more initial foaming volumes at the same concentration, which is because the greater cohesion between the surfactant molecules can increase the elasticity of the bubble film. Our study enriches the design rationales for low-foaming surfactants and motivates researchers to develop more advanced surfactants for industrial cleaning and photoresist development.

Synthesis of perylene‐PEO hyperdispersants for aqueous graphene dispersion

AbstractGraphene, with excellent thermal conductivity, electrical and corrosion shielding performance has great application potential in the fields of heat dissipation coating, conductive agent and anticorrosion composite coatings. However, due to its large specific surface area, resulting strong aggregation behavior limits its application. Herein, the hyperdispersants with perylene anchoring groups are synthesized through the amidation coupling reaction between diacid anhydride and polyetheramine. The branching degree and length of hydrophilic chains on hyperdispersant are revealed to be the very important factors to affect the dispersion stability of aqueous graphene dispersion. The hyperdispersant with a single hydrophilic chain and the molecular weight 2000 of polyetheramine has the excellent dispersal activity discovered by Rheology, particle size distribution and Raman measurements. The possible mechanism is the strongest anchoring effect of perylene on graphene surface and thus achieving in best effective spatial exclusion stabilization effect of hydrophilic chains.

KRas4b-Calmodulin Interaction with Membrane Surfaces: Role of Headgroup, Acyl Chain, and Electrostatics.

KRas4b is a small plasma membrane-bound G-protein that regulates signal transduction pathways. The interaction of KRas4b with the plasma membrane is governed by both its basic C-terminus, which is farnesylated and methylated, and the lipid composition of the membrane itself. The signaling activity of KRas4b is intricately related to its interaction with various binding partners at the plasma membrane, underlining the critical role played by the lipid environment. The calcium-binding protein calmodulin binds farnesylated KRas4b and plays an important role in the dynamic spatial cycle of KRas4b trafficking in the cell. We utilize Biolayer Interferometry to assay the role of lipid headgroup, chain length, and electrostatics in the dissociation kinetics of fully post-translationally modified KRas4b from Nanodisc bilayers with defined lipid compositions. Our results suggest that calmodulin promotes the dissociation of KRas4b from an anionic membrane, with a comparatively slower displacement of KRas4b from PIP2 relative to PS containing bilayers. In addition to this headgroup dependence, KRas4b dissociation appears to be slower from Nanodiscs wherein the lipid composition contains mismatched, unsaturated acyl chains as compared to lipids with a matched acyl chain length. These findings contribute to understanding the role of the lipid composition in the binding of KRas4b and release from lipid bilayers, showing that the overall charge of the bilayer, the identity of the headgroups present, and the length and saturation of the acyl chains play key roles in KRas4b release from the membrane, potentially providing insights in targeting Ras-membrane interactions for therapeutic interventions.

Designing Alkylammonium Cations for Enhanced Solubility of Anionic Active Materials in Redox Flow Batteries: The Role of Bulk and Chain Length.

Advancing grid-scale energy storage technologies is crucial for realizing a fully renewable energy landscape, with non-aqueous redox flow batteries (NRFBs) presenting a promising solution. One of the current challenges in NRFBs stems from the low energy density of redox active materials, primarily due to their limited solubility in non-aqueous solvents. Herein, this study explores the solubility of vanadium(IV/V) bis-hydroxyiminodiacetate (VBH) crystals in acetonitrile, aiming to use them as anionic catholytes in NRFBs. We focused on enhancing VBH solubility by modifying the structure of the alkylammonium cation. Employing periodic density functional theory and a solvation model, we calculated the dissolution free energy ([[EQUATION]]), which includes sublimation ([[EQUATION]]) and solvation ([[EQUATION]]) energies. Our results indicate that neither elongating straight-chain alkyl groups beyond a tetrabutylammonium baseline nor introducing bulky substituents at the nitrogen center significantly enhances solubility. However, the introduction of carbon spacers combined with terminal bulky substituents markedly improves solubility by favorably altering both [[EQUATION]] and [[EQUATION]]. These findings underline the nuanced impact of cation structure on solubility and suggest a viable approach to optimize VBH-based anionic catholytes. This advancement promises to enhance NRFB efficiency and sustainability, marking a significant step forward in energy storage technology.

Dissipative Particle Dynamics Study on Interfacial Properties of Ternary H-Shaped Copolymer–Homopolymer Blends

Dissipative particle dynamics (DPD) simulations is used to study the effect of Am/2BmAm/2 and H-shaped (Am/4)2Bm(Am/4)2 block copolymers on the interfacial properties of ternary blends. Our simulations show the following: (i) The capacity of block copolymers to diminish interfacial tension is closely linked to their compositions. With identical molecular weights and concentrations, H-shaped block copolymers outperform triblock copolymers in mitigating interfacial tension. (ii) The interfacial tension within the blends correlates positively with the escalation in H-shaped block copolymer molecular weight. This correlation suggests that H-shaped block copolymers featuring a low molecular weight demonstrate superior efficacy as compatibilizers when contrasted with those possessing a high molecular weight. (iii) Enhancing the concentration of H-shaped block copolymers fosters their accumulation at the interface, leading to a reduction in correlations between immiscible homopolymers and a consequent decrease in interfacial tension. (iv) As the length of the homopolymer chains increases, there is a concurrent elevation in interfacial tension, suggesting that H-shaped block copolymers perform more effectively as compatibilizers in blends characterized by shorter homopolymer chain lengths. These findings elucidate the associations between the efficacy of H-shaped block copolymer compatibilizers and their specific molecular characteristics.

Inorganic-Organic Hybrid Sulfide Solid Electrolytes Based on the Tetraalkylammonium Iodide-LiI-Li2S-P2S5 System

Abstract A series of novel inorganic-organic hybrid sulfide solid electrolytes were synthesized by doping Li7P2S8I with a selection of tetraalkylammonium iodides, including tetramethylammonium iodide (TMAI), tetraethylammonium iodide (TEAI), tetrapropylammonium iodide (TPAI), and tetrabutylammonium iodide (TBAI). The electrolytes were prepared in varying compositions represented as (1-x) Li7P2S8I ⸱ x (TMAI, TEAI, TPAI, TBAI), where x values were adjusted to 0, 0.05, 0.1, and 0.2 (molar ratio) to assess their influence on the electrolyte properties. These hybrids exhibited predominantly amorphous structures. Tetraalkylammonium iodides with longer alkyl chain length of the dopants showed lower ionic conductivity. Mechanical characterization via indentation tests indicated that the incorporation of longer alkyl chain length tetraalkylammonium iodides contributes to a reduction in the elastic modulus of the composites. This work underscores a methodological approach to modulate the structural and mechanical properties of sulfide solid electrolytes through strategic organic doping.

Simultaneous effects of temperature and backbone length on static and dynamic properties of high-density polyethylene-1-butene copolymer melt: Equilibrium molecular dynamics approach

Abstract Temperature and chain length play significant roles in determining the physical properties of polymer melts. In the current computational research, a molecular dynamics (MD) approach was implemented to describe the static and dynamic properties of (1) high-density polyethylene-1-butene with 120 beads in backbone (PE120) and (2) entangled high-density polyethylene-1-butene with 600 beads in the backbone (PE600). The transferable potentials for phase equilibria force fields were used for CH2 beads in a defined initial condition. First, the equilibrium phase of the designed systems was reported with total energy and density convergency at various initial temperatures (T 0 = 450, 470, and 490 K). Also, gyration radius (R g) and end-to-end distance (R) were calculated for the static behavior description of the two PEs. Zero-shear viscosity (η 0), mean square displacement, and diffusion coefficient (D) were estimated to define the dynamic behavior of PE120 and PE600 systems. MD outputs predicted that 10 ns is sufficient for equilibrium phase detection inside polymeric samples. After equilibrium phase detection, R g converged to 14.97 and 17.35 Å in PE120 and PE600, respectively (T 0 = 450 K). Furthermore, MD outputs show that temperature variation can considerably affect the time evolution of the system. Numerically, the η 0 of PE120 and PE600 converged to 49 and 168 cp at 450 K. These results of η 0 parameter as a function of temperature are an important output of MD simulations. The results predicted that η 0 decreases to 24 and 44 cp for PE120 and PE600 samples with an increase in temperature from 450 to 490 K. With the creation of the entanglements network, D reached the highest value of 2 × 10−9 m2·s−1 among the designed polymeric systems. The results are in good consistency with experimental reports. It is expected that the result of this study can be used in designing improved polymeric systems for real applications.

A systematic review of the toxic potential of parabens in fish

Parabens are the most prevalent ingredients in cosmetics and personal care products (PCPs). They are colorless and tasteless and exhibit good stability when combined with other components. Because of these unique physicochemical properties, they are extensively used as antimicrobial and antifungal agents. Their release into the aquatic ecosystem poses potential threats to aquatic organisms, including fish. We conducted an electronic search in PubMed (http://www.ncbi.nlm.nih.gov/pubmed) using the search term parabens and fish and sorted 93 articles consisting of methyl paraben (MTP), ethyl paraben (ETP), propyl paraben (PPP), butyl paraben (BTP), and benzyl paraben (BNP) in several fish species. Furthermore, we confined our search to six fish species (common carp, Cyprinus carpio; fathead minnows, Pimephales promelas; Japanese medaka, Oryzias latipes; rainbow trout, Oncorhynchus mykiss; Nile tilapia, Oreochromis niloticus; and zebrafish, Danio rerio) and four common parabens (MTP, ETP, PPP, and BTP) and sorted 48 articles for review. Our search indicates that among all six fish, zebrafish was the most studied fish and the MTP was the most tested paraben in fish. Moreover, depending on the alkyl chain length and linearity, long-chained parabens were more toxic than the parabens with short chains. Parabens can be considered endocrine disruptors (EDs), targeting estrogen-androgen-thyroid-steroidogenesis (EATS) pathways, blocking the development and growth of gametes, and causing intergenerational toxicity to impact the viability of offspring/larvae. Paraben exposure can also induce behavioral changes and nervous system disorders in fish. Although the USEPA and EU limit the use of parabens in cosmetics and pharmaceuticals, their prolonged persistence in the environment may pose an additional health risk to humans.

Silk Fibroin-Based Multiple-Shape-Memory Organohydrogels.

Organohydrogels (OHGs) are intriguing materials due to their unique composition of both hydrophilic and hydrophobic domains. This antagonistic nature endows the OHGs with several remarkable properties, making them highly versatile for various applications. We present here a simple and inexpensive approach to fabricate silk fibroin (SF)-based OHGs with multistage switching mechanics and viscoelasticity. The continuous hydrophilic phase of the OHG precursor consists of an aqueous SF solution, while the hydrophobic droplet phase consists of a crystallizable n-octadecyl acrylate (C18A) monomer and several long-chain saturated hydrocarbons (HCs) with various chain lengths between 14 and 32 carbon atoms, namely, n-tetradecane, n-octadecane, n-docosane, n-dotriacontane, and 1-docosanol. After the addition of a C18A/HC mixture containing Irgacure photoinitiator into the continuous aqueous SF phase under stirring, a stable oil-in-water emulsion was obtained, which was then photopolymerized at 23 ± 2 °C to obtain nonswelling OHGs with multiple-shape-memory behavior. By changing the chain length and mass proportion of HCs, a series of OHGs with tunable transition temperatures could be obtained, meeting various applications. OHGs containing dimer, trimer, and quadruple combinations of in situ-formed poly(C18A) and HC microinclusions exhibit effective triple- or quintuple-shape memory whose shape-recovery temperatures could be adjusted over a wide range, e.g., between 7 and 70 °C.

Diffusion in Polymethylene Chain Solutions with a Polar Component.

A hydrodynamic bead model based on Kirkwood-Riseman theory has been used to calculate the translational diffusion constant, D, for solutes with polymethylene chains in solutions with a polar component. A comparison with the experimental values for nonpolar n-alkanes in polar 2-propanol, tetrahydrofuran, chlorobenzene, chloroform, 1-octanol, quinoline, and chloroform (78 D values) and polar primary alcohols in nonpolar benzene and n-octane (24 D values) gives an average absolute percentage difference of ∼3% between the 102 experimental and calculated D values. Consideration of the solvent's temperature-dependent changes in the degree of aggregation due to hydrogen bonding was necessary for the n-alkanes in 1-octanol. Good agreement was not found for primary alcohols in 1-octanol due to solute-solvent hydrogen bonding. A correlation that depends on the solutes' molar volumes instead of their chain lengths gives worse agreement than the bead model for the n-alkanes in polar solvents and primary alcohols and n-alkanes in nonpolar solvents.

Leap from Diradicals to Tetraradicals by Topological Control of π-Conjugation.

In this work, we explore the series of diradical(oid)s based on 2,2'-(5,11-dihydroindolo[3,2-b]carbazole-3,9-diyl)dimalononitrile (further referred to as PH). Hydrogen atoms in the central benzenoid (CB) ring of PH are substituted by the series of substituents with various lengths of π-conjugated chain and electron-donating or electron-withdrawing properties to study how they modulate the diradical character of the parent compound. The diradical character of molecules increases up to 88-89% by two groups doubly bonded to both sides of the CB ring of PH in para relative positions. This breaks the direct π-conjugation between unpaired electrons that gives rise to two radical centers and restricts the minimal polyradical identity of the compound to diradical. We show that diradicals and tetraradicals can be designed, and their polyradical character can be modulated by controlling the topology of π-conjugation as long as there is sufficient aromatic stabilization. Henceforth, the bridge between diradicals and tetraradicals is established, leading to the tetraradical(oid) molecule, which has been predicted to have narrow low-spin to high-spin energy gaps in our recent Letter.

Promotion of RNF168-Mediated Nucleosomal H2A Ubiquitylation by Structurally defined K63-Polyubiquitylated Linker Histone H1.

The chemical synthesis of histones with homogeneous modifications is a potent approach for quantitatively deciphering the functional crosstalk between different post-translational modifications (PTMs). Here, we developed an expedient site-specific (poly)ubiquitylation strategy (CAEPL, Cysteine-Aminoethylation coupled with Enzymatic Protein Ligation), which integrates the Cys-aminoethylation reaction with the process of ubiquitin-activating enzyme UBA1-assisted native chemical ligation. Using this strategy, we successfully prepared monoubiquitylated and K63-linked di- and tri-ubiquitylated linker histone H1.0 proteins, which were incorporated into individual chromatosomes. Quantitative biochemical analysis of different RNF168 constructs on ubiquitylated chromatosomes with different ubiquitin chain lengths demonstrated that K63-linked polyubiquitylated H1.0 could directly stimulate RNF168 ubiquitylation activity by enhancing the affinity between RNF168 and chromatosome. Subsequent cryo-EM structural analysis of the RNF168/UbcH5c-Ub/H1.0-K63-Ub3 chromatosome complex revealed the potential recruitment orientation between RNF168 UDM1 domain and K63-linked ubiquitin chain on H1.0. Finally, we explored the impact of H1.0 ubiquitylation on RNF168 activity in the context of asymmetric H1.0-K63-Ub3 di-nucleosome substrate, revealing a comparable stimulation effect of both the inter- and intra-nucleosomal crosstalk. Overall, our study highlights the significance of access to structurally-defined polyubiquitylated H1.0 by CAEPL strategy, enabling in-depth mechanistic investigations of in-trans PTM crosstalk between linker histone H1.0 and core histone H2A ubiquitylation.

The Association Between the Structure of the Fatty Chain in Amides and Their Lubricating Performance in Acrylonitrile‐Butadiene‐Styrene (ABS) Resins

ABSTRACTThe exploitation of efficient lubricants for ABS resins is widely recognized as beneficial for industrial production. Fatty diamides are typically applied as the lubricants for ABS resins; however, the connection between fatty chain structures and the lubricating properties is still vague. In this work, a range of ethylenediamine‐based amide lubricants (EDA‐Cn) with different fatty chain structures were successfully prepared and chemical structures were characterized in detail by the Fourier transform infrared spectrometer and proton nuclear magnetic resonance. The rheological test results suggested that the complex viscosity and relaxation time were positively associated with the fatty chain lengths of EDA‐Cn. The dynamic mechanical analysis results confirmed that EDA‐Cn exhibited excellent compatibility with ABS resins. The lubricating effect of EDA‐Cn decreased with increasing fatty chain lengths, which was manifested by a higher glass transition temperature, and lower elongation at break of ABS resins. In comparison to EDA‐C22, the complex viscosity (angular frequency = 0.1 rad/s) and glass transition temperature of EDA‐C10 have decreased by 24.9% and 3.9%, respectively. The molecular dynamics simulations revealed the intrinsic mechanism of lubricant‐substrate interaction. The EDA‐Cn containing short fatty chain lengths reduced the interaction energy with the matrix, thereby promoting the diffusive movement of the chain segments, and resulted in the increase in the mean square displacement and improved flow properties. These findings provided sufficient theoretical basis for the rational design and preparation of lubricants for ABS resins.

Flipping Water Orientation at the Surface of Water-in-Salt and Salt-in-Water Solutions.

Salt-in-water and water-in-salt mixtures are promising for battery applications and fine-tuning of room-temperature ionic liquid (RTIL) properties. Although critical processes take place at interfaces of these systems, including charge transfer and heterogeneous catalytic reactions, the microscopic interfacial structures remain unclear. Here, we apply heterodyne-detected sum-frequency generation spectroscopy to aqueous solutions of imidazolium-based RTILs to unveil the microscopic structure of the interfaces of these solutions with air. Our results show that, under salt-in-water conditions, the orientation of the OH group hydrogen-bonded to the other water molecules flips from the OH group pointing down into the liquid for pure water to up due to the accumulation of anions in the cation-rich interfacial region. However, under the water-in-salt condition, the interfacial water molecules are confined by RTIL, and their orientation is down. Details of the water organization depend critically on the alkyl chain length of the imidazolium cation. Our results demonstrate that the surface structure can be tuned by altering the molecular structure and concentration of the RTIL.

A new homologous series of semi-conducting liquid crystals based on phenyl-anthracene: synthesis and effect of the alkyloxy terminal chain on charge transport and photoconductive properties.

π-Conjugated systems are the key to the charge transport properties of organic semiconductors. Four multifunctional mesogenic materials were designed and synthesised from 2-amino anthracene and para-hydroxybenzaldehyde. Each material contains a central, rigid phenyl-anthracene core and one flexible alkyloxy chain with different lengths based on the concept of combining liquid crystal (LC) materials featuring facile processability, highly ordered alignment, and effective charge transport. (E)-N-(Anthracen-2-yl)-1-(4-(alkyloxy)phenyl) methanimine (n-OPIA) with n = 8, 10, 12, and 16 was chemically characterized by nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. Their thermal behaviours were performed by means of differential scanning calorimetry and polarised optical microscopy and showed differences in mesomorphic behaviours with respect to the alkyloxy chain length. Concerning their frontier molecular energy levels, they were studied by optical spectroscopy and cyclic voltammetry and compared to values obtained via ab initio density-functional theory (DFT) calculations. LC field-effect transistors (LC-FETs) using a solvent vapour enhanced drop casting based n-OPIA material showed efficient electrical parameters and interesting photoconductive properties, indicating their potential applications in multifunctional integrated devices. As the alkyloxy chain length of the n-OPIA compounds increased, the hole mobility, on/off current ratio, and responsivity decreased. The 8-OPIA homologue exhibits a mobility one order of magnitude larger than the previously studied homologue, namely 10-OPIA.

Single-cell polymer coating improves the desiccation tolerance of Metarhizium brunneum blastospores

Equipping cells with artificial shells or coats has been explored throughout the last decade, with goals such as immunomasking, in vivo tracing, and imparting tolerance to various biotic and abiotic stressors. One stressor, however, drying, has curiously been overlooked. In an industrial setting, the drying of cells is relevant when a satisfactory product shelf life must be achieved at a low cost. The drying of entomopathogenic organisms for biocontrol is a prime example of this. Here, the thin-walled blastospores of the entomopathogenic fungus Metarhizium brunneum are a great model organism for testing whether thin-cell surface polyelectrolyte layers may increase desiccation tolerance. In this study, we coated single M. brunneum blastospores with alternating layers of chitosan and alginate and assessed their effects on blastospore viability after drying. The desiccation tolerance improved with increasing layer numbers from 6.9% to a maximum of 27.5%. In addition, as the polymer chain length decreased, the desiccation tolerance further increased to 33.1%. Furthermore, we provided visual proof of the coating surrounding the blastospores via the use of fluorescent polymers and scanning electron microscopy. Finally, an investigation of differences in water absorption into coated and uncoated cells revealed that water absorbed faster into coated cells when alginate was on the surface of the structure but slower when the outermost layer was composed of chitosan. We conclude that, via polyelectrolyte multilayering on thin-walled blastospores, desiccation tolerance can be significantly increased, but a deeper understanding is necessary to extract the full potential from this technique.Graphical