Leaf Surface Wetness Research Articles

Mircrofabricating double-sided polydimethylsiloxane (PDMS) artificial phylloplane for microbial food safety research

Leafy green surface microbiology studies often experience significant variations in results due to the heterogeneous nature of leaf surfaces. To provide a precise and controllable substitute, we microfabricated double-sided artificial leafy green phylloplanes using polydimethylsiloxane (PDMS) with a vinyl-terminated polyethylene glycol chain-based hydrophobicity modifier (PDMS-PEG) to modify PDMS hydrophobicity. We further tested the properties and applications of these artificial leaves, by examining the function of epicuticular wax, growth and survival of E. coli O157:H7 87–23 on the surface, and removal of attached E. coli cells via sanitation. The double-sided PDMS-PDMS-PEG leaves well-replicated their natural counterparts in macroscopic and microscopic structure, hydrophobicity, and E. coli O157:H7 87–23 attachment. After depositing natural epicuticular wax onto artificial leaves, the leaf surface wetting ability decreased, while E. coli O157:H7 87–23 surface retention increased. The artificial leaves supplied with lettuce lysate or bacterial growth media supported E. coli O157:H7 87–23 growth and survival similarly to those on natural leaves. In the sanitation test, the artificial lettuce leaves also displayed patterns similar to those of natural leaves regarding sanitizer efficiency. Overall, this study showcased the microfabrication and applications of double-sided PDMS-PDMS-PEG leaves as a replicable and controllable platform for future leafy green food safety studies.

Effect of Brucea javanica Oil on the Toxicity of β-Cypermethrin Emulsifiable Concentrate Formulation.

Enhancing the performance of traditional pesticide formulations by improving their leaf surface wetting capabilities is a crucial approach for maximizing the pesticide efficiency. This study develops an emulsifiable concentrate (EC) of 4.5% β-cypermethrin containing Brucea javanica oil (BJO). The incorporation of BJO aims to improve the leaf-wetting properties of the EC formulation and enhance its insecticidal effectiveness. The droplet size and emulsion characteristics of β-CYP EC emulsion with varying concentrations of the emulsifier were evaluated, and changes after incorporating BJO were assessed to develop the optimal formulation. A comprehensive comparison was conducted among commercial 4.5% β-cypermethrin EC (β-CYP EC-1), 4.5% β-cypermethrin EC with BJO (β-CYP EC-2), and 4.5% β-cypermethrin EC without BJO (β-CYP EC-3). This comparison encompassed various factors including storage stability, insecticidal activity, cytotoxicity, and wetting performance on cabbage leaves. The results indicated that the ideal emulsifier concentration was 15% emulsifier 0201B. β-CYP EC-2 demonstrated superior wetting properties on cabbage leaves (the wetting performance of β-CYP EC-2 emulsion on cabbage leaves is 2.60 times that of the β-CYP EC-1 emulsion), heightened insecticidal activity against the third larvae of Plutella xylostella [diamondback moth (DBM)] [the insecticidal activity of the β-CYP EC-2 emulsion against the third larvae of DBM is 1.93 times that of the β-CYP EC-1 emulsion (12 h)], and more obvious inhibitory effects on the proliferation of DBM embryo cells than the other tested formulations. These findings have significant implications for advancing pest control strategies and promoting sustainable and effective agricultural practices.

Interaction of surfactants with Prunus laurocerasus leaf surfaces: time-dependent recovery of wetting contact angles depends on physico-chemical properties of surfactants

BackgroundSurfactants are added to spray solutions because they significantly improve foliar uptake of active ingredients (AIs) into the leaves. It was intended to investigate whether surfactant solutions forming a dried deposit on Prunus leaf surfaces after they were sprayed, lead to structural and functional changes of the cuticle/atmosphere interface. This could potentially result in irreversibly enhanced leaf surface wetting, which should be of major disadvantage. Enhanced wetting could promote leaching of ions and promote leaf surface colonization with microorganisms.ResultsPrunus laurocerasus leaf surfaces were sprayed with aqueous solutions of non-ionic alcohol ethoxylates, a cationic, an anionic and one large polar surfactant. Directly after spraying and drying of the different surfactant solutions, wetting contact angles of deionized water (without surfactant) were significantly lower (between 6 and 54°) compared to wetting contact angles on untreated leaves (77°). Leaf surface wettability with deionized water was more pronounced with non-ionic alcohol ethoxylates (wetting contact angles ranging between 6 and 22°) compared to the other 3 surfactants (wetting contact angles ranging between 42 and 54°). Wetting contact angles of deionized water on leaf surfaces treated with non-ionic alcohol ethoxylates continuously increased again over time resulting in final wetting contact angles not different from untreated leaf surfaces. The time-dependent recovery of wetting contact angles was dependent on the degree of ethoxylation of the non-ionic alcohol ethoxylates. The wetting contact angle recovery rate was lower the higher the degree of ethoxylation of the alcohol ethoxylates was. With the cationic, anionic and large polar surfactant a recovery of wetting contact angles was not observed. In addition, on fully dehydrated and dead leaves wetting contact angle recovery was not observed for any of the tested surfactants after spraying and drying. Analytical determinations of the amounts of alcohol ethoxylates on the leaf surfaces after spraying and drying showed that amounts of alcohol ethoxylates decreased over time on the surface (24–72 h).ConclusionOur results indicate that non-ionic alcohol ethoxylates diffused within hours from the leaf surface into the leaf over time and thus fully disappeared from the leaf surface. This was not the case with the cationic, anionic and the large polar surfactants remaining on the leaf surface.Graphical

Infection Characteristics and Physical Prevention Strategy of Panax notoginseng Round Spot Disease Caused by Mycocentrospora acerina.

Panax notoginseng round spot disease (PRSD), caused by Mycocentrospora acerina, is the main leaf disease occurring in cultured P. notoginseng. Aiming to find a safe and efficient control method for PRSD, we studied the disease characteristics of PRSD and the optimal growth conditions of M. acerina and evaluated the efficacy of rain-shelter cultivation in PRSD control. Moreover, we described M. acerina based on morphological characterization and molecular analyses (ITS, ACT, LSU, and TEF-1α). The optimum temperature for M. acerina conidial germination was found to be 14 to 22°C. Furthermore, leaf surface wetness for at least 4 h is required for conidial germination, and conidia can successfully infect P. notoginseng when the leaf wetness lasts for more than 8 h. Additionally, rainwater splashing determines the conidial transfection distance, which is less than 2 m. Finally, our study revealed that rain-shelter cultivation is an effective and simple physical prevention strategy to control PRSD, with an average efficacy of up to 100%.

Interaction of surfactants with barley leaf surfaces: time-dependent recovery of contact angles is due to foliar uptake of surfactants

Main conclusionTime-dependent contact angle measurements of pure water on barley leaf surfaces allow quantifying the kinetics of surfactant diffusion into the leaf.Barley leaf surfaces were sprayed with three different aqueous concentrations (0.1, 1.0 and 10%) of a monodisperse (tetraethylene glycol monododecyl ether) and a polydisperse alcohol ethoxylate (BrijL4). After 10 min, the surfactant solutions on the leaf surfaces were dry leading to surfactant coverages of 1, 10 and 63 µg cm−2, respectively. The highest surfactant coverage (63 µg cm−2) affected leaf physiology (photosynthesis and water loss) rapidly and irreversibly and leaves were dying within 2–6 h. These effects on leaf physiology did not occur with the lower surfactant coverages (1 and 10 µg cm−2). Directly after spraying of 0.1 and 1.0% surfactant solution and complete drying (10 min), leaf surfaces were fully wettable for pure water and contact angles were 0°. Within 60 min (0.1% surfactant) and 6 h (1.0% surfactant), leaf surfaces were non-wettable again and contact angles of pure water were identical to control leaves. Scanning electron microscopy investigations directly performed after surfactant spraying and drying indicated that leaf surface wax crystallites were partially or fully covered by surfactants. Wax platelets with unaltered microstructure were fully visible again within 2 to 6 h after treatment with 0.1% surfactant solutions. Gas chromatographic analysis showed that surfactant amounts on leaf surfaces continuously disappeared over time. Our results indicate that surfactants, applied at realistic coverages between 1 and 10 µg cm−2 to barley leaf surfaces, leading to total wetting (contact angles of 0°) of leaf surfaces, are rapidly taken up by the leaves. As a consequence, leaf surface non-wettability is fully reappearing. An irreversible damage of the leaf surface fine structure leading to enhanced wetting and increased foliar transpiration seems highly unlikely at low surfactant coverages of 1 µg cm−2.

Mechanical buckling can pattern the light-diffracting cuticle of Hibiscus trionum.

Many species have cuticular striations that play a range of roles, from pollinator attraction to surface wettability. In Hibiscus trionum, the striations span multiple cells at the base of the petal to form a pattern that produces a type of iridescence. It is postulated, using theoretical models, that the pattern of striations could result from mechanical instabilities. By combining the application of mechanical stress with high-resolution imaging, we demonstrate that the cuticle buckles to create a striated pattern. Through mechanical modeling and cryo-SEM fractures, we show that the cuticle behaves like a bilayer system with a stiff film on a compliant substrate. The pattern of buckling aligns with the direction of the stress to create a larger-scale pattern. Our findings contribute to the understanding of the formation of tissue-wide patterns in living organisms.

Morphophysiological and biochemical attributes influence intra-genotypic preference of shoot fly [Atherigona soccata (Rondani)] among sorghum genotypes.

Shoot fly [Atherigona soccata (Rondani)] is a destructive pest of sorghum at the seedling stage and causes huge losses to grain yield and green fodder. The host-plant resistance mechanism is the best approach to reduce the attack of insects in plants. The damage parameters, morphophysiological traits, and biochemical metabolites had been investigated in the leaves and stem of contrasting sorghum genotypes, viz., resistant (IS18551, ICSV705, ICSV700), moderately resistant (PSC-4), and susceptible (SWARNA and SL-44) at 15 and 21days after emergence (DAE) against shoot fly infestation. The resistant genotypes recorded lowest shoot fly oviposition and incidence (0.3-0.7 eggs plant-1 and 10-15%) than the susceptible genotypes (2.4-3.0 eggs plant-1 and 70-80%), respectively. The susceptible genotype SWARNA recorded 50% and 80% higher deadheart formation than the resistant genotype IS18551 at 15 and 21 DAE, respectively. Resistant genotypes exhibited higher trichome density at adaxial and abaxial part of leaf (118-145 and 106-131) with pink colored leaf sheath (scale 1.50-3.25), glossy leaves (scale1.00-1.25), and lower leaf surface wetness (scale1.25-2.00) compared with susceptible genotype with 49.3-73.3 and 25.3-64.0, scale 2.50-4.00, scale 2.75-3.50, and scale 3.25-4.25 for the respective parameters. Another defense response of sorghum toward the insect attack was modulation of plant metabolism. The infested genotypes responded to insect attack by upregulation of total soluble sugar, total phenol, prussic acid, and chlorophyll content by 1.2-2.1-fold, 1.5-2.0-fold, 1.2-1.3-fold, and 1.2-3.9-fold with more induction in susceptible genotypes at 21 DAE. On the whole, the present study indicates that morphophysiological and biochemical attributes contribute toward the resistance mechanism in sorghum against shoot fly infestation.

Identifying the pathways for foliar water uptake in beech (Fagus sylvatica L.): a major role for trichomes.

Foliar water uptake (FWU), the direct uptake of water into leaves, is a global phenomenon, having been observed in an increasing number of plant species. Despite the growing recognition of its functional relevance, our understanding of how FWU occurs and which foliar surface structures are implicated, is limited. In the present study, fluorescent and ionic tracers, as well as microcomputed tomography, were used to assess potential pathways for water entry in leaves of beech, a widely distributed tree species from European temperate regions. Although none of the tracers entered the leaf through the stomatal pores, small amounts of silver precipitation were observed in some epidermal cells, indicating moderate cuticular uptake. Trichomes, however, were shown to absorb and redistribute considerable amounts of ionic and fluorescent tracers. Moreover, microcomputed tomography indicated that 72% of empty trichomes refilled during leaf surface wetting and microscopic investigations revealed that trichomes do not have a cuticle but are covered with a pectin-rich cell wall layer. Taken together, our findings demonstrate that foliar trichomes, which exhibit strong hygroscopic properties as a result of their structural and chemical design, constitute a major FWU pathway in beech.

Wettability of ionic surfactants SDS and DTAB on wheat (Triticum aestivum) leaf surfaces

Due to the important use of pesticide formulation, it is necessary to make it clear how ionic surfactant effect the wettability at leaf surface. In this work, we used the sessile drop method to study the wettability of SDS and DTAB on wheat leaf surfaces at different leaf stages, and reveal the relationship between surfactants structures and leaf stages of wheat leaf surfaces on wettability behavior. Results showed that few surfactant molecules adsorbed at the interface at low concentrations. With the concentration increased, the surfactant replaced the air layer partially within the nano/micro structure of leaf surfaces. When the concentration exceeded to CMC, the adsorption of surfactant molecules was saturated at both air-liquid interface and solid-liquid interface, the wetting state was still the transitional state between Cassie-Baxter’s and Wenzel’s state. In all concentrations, the adhesional tension and surface tension showed the linear relationship and the slope values were all below −1, suggesting there were more surfactant molecules adsorbed at the solid-liquid interface than the liquid-air interface. As SDS is a common wetting agent and DTAB is a common fungicide in agrochemical, this study will provide potential guidance in practical application of pesticide solutions in leaf surface wetting.

Leaf surface traits and water storage retention affect photosynthetic responses to leaf surface wetness among wet tropical forest and semiarid savanna plants

While it is reasonable to predict that photosynthetic rates are inhibited while leaves are wet, leaf gas exchange measurements during wet conditions are challenging to obtain due to equipment limitations and the complexity of canopy-atmosphere interactions in forested environments. Thus, the objective of this study was to evaluate responses of seven tropical and three semiarid savanna plant species to simulated leaf wetness and test the hypotheses that (i) leaf wetness reduces photosynthetic rates (Anet), (ii) leaf traits explain different responses among species and (iii) leaves from wet environments are better adapted for wet leaf conditions than those from drier environments. The two sites were a tropical rainforest in northern Costa Rica with ~4200 mm annual rainfall and a savanna in central Texas with ~1100 mm. Gas exchange measurements were collected under dry and wet conditions on five sun-exposed leaf replicates from each species. Additional measurements included leaf wetness duration and stomatal density. We found that Anet responses varied greatly among species, but all plants maintained a baseline of activity under wet leaf conditions, suggesting that abaxial leaf Anet was a significant percentage of total leaf Anet for amphistomatous species. Among tropical species, Anet responses immediately after wetting ranged from -31% (Senna alata (L.) Roxb.) to +21% (Zamia skinneri Warsz. Ex. A. Dietr.), while all savanna species declined (up to -48%). After 10 min of drying, most species recovered Anet towards the observed status prior to wetting or surpassed it, with the exception of Quercus stellata Wangenh., a savanna species, which remained 13% below Anet dry. The combination of leaf wetness duration and leaf traits, such as stomatal density, trichomes or wax, most likely influenced Anet responses positively or negatively. There was also overlap between leaf traits and Anet responses of savanna and tropical plants. It is possible that these species converge on a relatively conservative response to wetness, each for divergent purposes (cooling, avoiding stomatal occlusion, or by several unique means of rapid drying). A better understanding of leaf wetness inhibiting photosynthesis is vital for accurate modeling of growth in forested environments; however, species adapted for wet environments may possess compensatory traits that mitigate these effects.

Effect of surface wetness and duration of low temperature exposure on frost damage in subtropical fruit species

Frost is the most devastating weather hazard for horticultural growth in the NW India. For mitigation of its impact the information on the process of freeze initiation a spread and the factors involved in aggravating the damage is of utmost importance. Studies were conducted at COHF Neri under controlled and radiation frost customized environment. REL was the measure adopted for accessing the damage. Two leaf surface wetness levels (wet and dry) along with three durations of low temperature (-2 0 C) exposure 2 hours, 4 hours and 6 hours were taken under a Completely Randomized Factorial experiment conducted on container grown ten subtropical fruit species. Leaf surface wetness was more critical in case of mango and litchi whereas in case guava, jamun, karonda, galgal, lime extrinsic ice nucleation was not very important in inducing internal damage to the leaf tissues. Duration of low temperature exposure aggravated the damage level in almost all the species. In case of papaya and jackfruit higher susceptibility of these species to frost induced freeze damage the impact of frost duration was not found to be significant. The relative order off susceptibility of different species was observed to be as: Loquat, galgal, lime, guava, karonda, jamun, litchi, mango, jackfruit, papaya in the increasing order.

Rain-induced ejection of pathogens from leaves: revisiting the hypothesis of splash-on-film using high-speed visualization.

Plant diseases are a major cause of losses of crops worldwide. Although rainfalls and foliar disease outbreaks are correlated, the detailed mechanism explaining their link remains poorly understood. The common assumption from phytopathology for such link is that a splash is generated upon impact of raindrops on contaminated liquid films coating sick leaves. We examine this assumption using direct high-speed visualizations of the interactions of raindrops and leaves over a range of plants. We show that films are seldom found on the surface of common leaves. We quantify the leaf-surface's wetting properties, showing that sessile droplets instead of films are predominant on the surfaces of leaves. We find that the presence of sessile drops rather than that of films has important implications when coupled with the compliance of a leaf: it leads to a new physical picture consisting of two dominant rain-induced mechanisms of ejection of pathogens. The first involves a direct interaction between the fluids of the raindrop and the sessile drops via an off-centered splash. The second involves the indirect action of the raindrop that leads to the inertial detachment of the sessile drop via the leaf's motion imparted by the impact of the raindrop. Both mechanisms are distinct from the commonly assumed scenario of splash-on-film in terms of outcome: they result in different fragmentation processes induced by surface tension, and, thus, different size-distributions of droplets ejected. This is the first time that modern direct high-speed visualizations of impacts on leaves are used to examine rain-induced ejection of pathogens at the level of a leaf and identify the inertial detachment and off-center splash ejections as alternatives to the classically assumed splash-on-film ejections of foliar pathogens.

Superhydrophobic New Zealand leaves: contact angle and drop impact experiments

Dynamic wetting of the adaxial leaf surfaces of several New Zealand native plants has been studied using water drops, contact angle measurements and drop impact experiments. Three native plants (Arthropodium bifurcatum, Euphorbia glauca and Veronica albicans) are identified as superhydrophobic, having advancing contact angles >160°, with <12° hysteresis and <10° roll off angle. These data are comparable to leaves of the lotus (Nelumbo nucifera), an international superhydrophobicity benchmark. Scanning electron microscopy reveals a range of epidermal microstructures and submicron epicuticle wax textures on native leaves, including superhydrophobic microstructures that are similar to those found on exotic leaves. Drop impacts on N. nucifera, A. bifurcatum and E. glauca were filmed using a high speed camera at Weber number between 15 and 200. Drops impacting on the two native plants exhibited asymmetry due to vascular bundles on the leaf surfaces. Biomimicry and dynamic wetting are important for development of industrial superhydrophobic surfaces.

Hohenheimer Modul und Berechnungsmodell zur Simulation der Taubildung

Leaf surface wetness along with dewfall, which frequently occurs during spring and summer in Central Europe, are critical factors regarding the formation and control of plant diseases. A simulation module and a corresponding calculation model were created in order to reproduce dewfall and the formation of dew, as well as its impact on arable crops on a laboratory scale.

Avaliação de práticas de manejo da mancha-de-Corynespora na cultura do tomate

Corynespora leaf spot management alternatives on tomato crop were evaluated in two experiments laid out in randomized complete blocks in a factorial design (2 x 3 x 3), with four and six replications, respectively. The first factor was the soil covering in two levels: soil mulching (dry grass clipping) or bare soil. The second factor was the foliar spraying with three levels: non aerated biofertilizer, fungicide and water. The third factor was the plant management with three levels: selective removal of side shoots, diseased leaf removal or no plant management. The disease severity and disease index (DI) data were assessed twice a week and fruit yield was assessed at the end of the crop cycle. The area under disease progress curves were estimated with severity and DI data and fruit yield data was used to performing statistical analysis. The mulching and the non aerated biofertilizer spraying did not have a significant effect in the disease intensity or in fruit yield. In the plants submitted to selective removal of side shoots and diseased leaf removal, disease severity was significantly lower than in plants not submitted to these treatments. Both plant management practices probably decreased the leaf surface wetness duration in the plant canopy and the diseased leaf removal also significantly reduced (P<0,05) the number of C. cassiicola conidia in the air. These cultural management practices should be used for Corynespora leaf spot management in small production fields.

Physico-chemical mechanisms of resistance to shoot fly, Atherigona soccata in sorghum, Sorghum bicolor

Sorghum shoot fly, Atherigona soccata is an important pest of sorghum, and host plant resistance is one of the important components for minimizing the losses due to this pest. Therefore, we evaluated a diverse array of sorghum genotypes to identify physico-chemical characteristics conferring resistance to A. soccata. Susceptibility to shoot fly was associated with high amounts of soluble sugars, fats, leaf surface wetness and seedling vigour; while leaf glossiness, plumule and leaf sheath pigmentation, trichome density and high tannin, Mg and Zn showed resistance to shoot fly. Stepwise regression indicated that Mg, Zn, soluble sugars, tannins, fats, leaf glossiness, leaf sheath and plumule pigmentation and trichome density explained 99.8% of the variation in shoot fly damage. Path coefficient analysis suggested that leaf glossiness, trichome density, Mg and fat content and plant plumule pigmentation can be used as markers traits to select for shoot fly resistance in sorghum.

Modelling the dynamic chemical interactions of atmospheric ammonia with leaf surface wetness in a managed grassland canopy

Abstract. Ammonia exchange fluxes between grassland and the atmosphere were modelled on the basis of stomatal compensation points and leaf surface chemistry, and compared with measured fluxes during the GRAMINAE intensive measurement campaign in spring 2000 near Braunschweig, Germany. Leaf wetness and dew chemistry in grassland were measured together with ammonia fluxes and apoplastic NH4+ and H+ concentration, and the data were used to apply, validate and further develop an existing model of leaf surface chemistry and ammonia exchange. Foliar leaf wetness which is known to affect ammonia fluxes may be persistent after the end of rainfall, or sustained by recondensation of water vapour originating from the ground or leaf transpiration, so measured leaf wetness values were included in the model. pH and ammonium concentrations of dew samples collected from grass were compared to modelled values. The measurement period was divided into three phases: a relatively wet phase followed by a dry phase in the first week before the grass was cut, and a second drier week after the cut. While the first two phases were mainly characterised by ammonia deposition and occasional short emission events, regular events of strong ammonia emissions were observed during the post-cut period. A single-layer resistance model including dynamic cuticular and stomatal exchange could describe the fluxes well before the cut, but after the cut the stomatal compensation points needed to numerically match measured fluxes were much higher than the ones measured by bioassays, suggesting another source of ammonia fluxes. Considerably better agreement both in the direction and the size range of fluxes were obtained when a second layer was introduced into the model, to account for the large additional ammonia source inherent in the leaf litter at the bottom of the grass canopy. Therefore, this was found to be a useful extension of the mechanistic dynamic chemistry model by keeping the advantage of requiring relatively little site-specific information.

Patterns of Leaf Wettability along an Extreme Moisture Gradient in Western Patagonia, Argentina

The objective of this study was to investigate patterns of surface features of leaves related to susceptibility to wetness for plants along a strong precipitation gradient. Leaf wettability and droplet retention were examined for leaves of 37 species (representing 28 families) occurring in steppe, ecotone, and temperate rain forest habitats along a steep moisture gradient in northwestern Patagonia, Argentina. Morphological and structural characteristics of leaves significantly affected leaf surface wetness, and these characteristics varied between habitats. Typically, leaves had more stomata on abaxial than adaxial leaf surfaces ($$P< 0.0001$$). Droplet retention and leaf wettability (θ) were negatively correlated (Spearman $$r=-0.694$$; $$P< 0.0001$$). Leaves in dry habitats tended to be less wettable and less likely to retain droplets on the leaf surface; however, overall differences were not significant. The presence of trichomes significantly reduced wettability ($$P< 0.05$$). The high frequency and natural variability of wetting events in these and a great variety of other habitats, coupled with the large range in surface wettability among plant species and the potentially strong effects on photosynthesis, growth, and pathogen infections, suggest an important evolutionary avenue related to the dynamics of water on leaf surfaces.

Ammonia fluxes and derived canopy compensation points over non-fertilized agricultural grassland in The Netherlands using the new gradient ammonia—high accuracy—monitor (GRAHAM)

During a measurement period from June till November 2004, ammonia fluxes above non-fertilized managed grassland in The Netherlands were measured with a Gradient Ammonia—High Accuracy—Monitor (GRAHAM). Compared with earlier ammonia measurement systems, the GRAHAM has higher accuracy and a quality control system. Flux measurements are presented for two different periods, i.e. a warm, dry summer period (from 18 July till 15 August) and a wet, cool autumn period (23 September till 23 October). From these measurements canopy compensation points were derived. The canopy compensation point is defined as the effective surface concentration of ammonia. In the summer period (negative) deposition fluxes are observed in the evening, night and early morning due to leaf surface wetness, while in the afternoon emission fluxes are observed due to high canopy compensation points. The mean NH 3-flux in this period was 4 ng m −2 s −1, which corresponds to a net emission of 0.10 kg N ha −1 over the 28 day sampling period. The NH 3-flux in the autumn period mainly shows (negative) deposition fluxes due to small canopy compensation points caused by low temperatures and a generally wet surface. The mean NH 3-flux in this period is −24 ng m −2 s −1, which corresponds to a net deposition of 0.65 kg N ha −1 over the 31 day sampling period. Frequency distributions of the NH 3-concentration and flux show that despite higher average ambient NH 3-concentrations (13.3 μg m −3 in the summer period vs. 6.4 μg m −3 in the autumn period) there are more emission events in the summer period than in the autumn period (about 50% of the time in summer vs. 20% in autumn). This is caused by the high canopy compensation points in summer due to high temperatures and a dry surface. In autumn, deposition dominates due to a generally wet surface that induces low canopy compensation points. For our non-fertilized agricultural grassland site, the derived canopy compensation points (at temperatures between 7 and 29 °C) varied from 0.5 to 29.7 μg m −3 and were on an average 7.0 μg m −3, which is quite high for non-fertilized conditions and probably caused by high nitrogen inputs in the past or high dry deposition amounts from local sources. The average value for the ratio between NH 4 + and H + concentration in the canopy, Γ c, that was derived from our data was 2200.

Foliage surface ozone deposition: a role for surface moisture?

Abstract. This paper addresses the potential role of surface wetness in ozone deposition to plant foliage. We studied Scots pine foliage in field conditions at the SMEARII field measurement station in Finland. We used a combination of data from flux measurement at the shoot (enclosure) and canopy scale (eddy covariance), information from foliage surface wetness sensors, and a broad array of ancillary measurements such as radiation, precipitation, temperature, and relative humidity. Environmental conditions were defined as moist during rain or high relative humidity and during the subsequent twelve hours from such events, circumstances that were frequent at this boreal site. From the measured fluxes we estimated the ozone conductance using it as the expression of the strength of ozone removal surface sink or total deposition. Further, we estimated the stomatal contribution and the remaining deposition was interpreted and analysed as the non-stomatal sink. The combined time series of measurements showed that both shoot and canopy-scale ozone total deposition were enhanced when moist conditions occurred. On average, the estimated stomatal deposition accounted for half of the measured removal at the shoot scale and one third at the canopy scale. However, during dry conditions the estimated stomatal uptake predicted the behaviour of the measured deposition, but during moist conditions there was disagreement. The estimated non-stomatal sink was analysed against several environmental factors and the clearest connection was found with ambient relative humidity. The relationship disappeared under 70% relative humidity, a threshold that coincides with the value at which surface moisture gathers at the foliage surface according to the leaf surface wetness measurements. This suggests the non-stomatal ozone sink on the foliage to be modulated by the surface films. We attempted to extract such potential modulation with the estimated film formation via the theoretical expression of adsorption. Whereas this procedure could predict the behaviour of the non-stomatal sink, it implied a chemical sink that was not accountable as simple ozone decomposition. We discuss the existence of other mechanisms whose relevance in the removal of ozone needs to be clarified, in particular: a significant nocturnal stomatal aperture neglected in the estimations, and a potentially large chemical sink offered by reactive biogenic organic volatile compounds.