Lead Halide Perovskite Research Articles

Ligand Assisted Hydrogen Bonding: A Game-Changer in Lead Passivation and Stability in Perovskite Solar Cells.

Lead halide perovskite solar cells (PSCs) have demonstrated power conversion efficiencies comparable to silicon-based solar cells, yet their instability under environmental stressors, such as humidity, heat, and light, remains a significant barrier to commercialization. A primary cause of this instability is the uncoordinated lead ions (Pb2+), which accelerates the degradation of PSCs and pose environmental concerns due to potential lead leakage. Recently, the introduction of ligands into PSCs has shown promise in mitigating lead toxicity through effective passivation, primarily by forming hydrogen bonds (H-bonds) between functional groups of the ligands and the perovskite structure. In this minireview, we explore the critical role of H-bonds in stabilizing PSCs by enhancing the structural integrity of the perovskite layer and reducing lead leakage. Furthermore, we discuss the contribution of these ligands in defect passivation, hydrophobicity, self-encapsulation, cross-linking, and self-healing mechanisms. These insights will highlight the multi-functional capabilities of ligands in improving the long-term stability and durability of PSCs, offering pathways to address current challenges in their commercialization.

Ligand Assisted Hydrogen Bonding: A Game‐Changer in Lead Passivation and Stability in Perovskite Solar Cells

Lead halide perovskite solar cells (PSCs) have demonstrated power conversion efficiencies comparable to silicon‐based solar cells, yet their instability under environmental stressors, such as humidity, heat, and light, remains a significant barrier to commercialization. A primary cause of this instability is the uncoordinated lead ions (Pb2+), which accelerates the degradation of PSCs and pose environmental concerns due to potential lead leakage. Recently, the introduction of ligands into PSCs has shown promise in mitigating lead toxicity through effective passivation, primarily by forming hydrogen bonds (H‐bonds) between functional groups of the ligands and the perovskite structure. In this minireview, we explore the critical role of H‐bonds in stabilizing PSCs by enhancing the structural integrity of the perovskite layer and reducing lead leakage. Furthermore, we discuss the contribution of these ligands in defect passivation, hydrophobicity, self‐encapsulation, cross‐linking, and self‐healing mechanisms. These insights will highlight the multi‐functional capabilities of ligands in improving the long‐term stability and durability of PSCs, offering pathways to address current challenges in their commercialization.

Multi-Noncentrosymmetric Polar Order in 2D Hybrid Lead Chloride with Broadband Emission and High-Temperature Second-Harmonic Generation Switching.

Two-dimensional lead halide perovskites represent a fascinating class of hybrid semiconductors for solar cell, light-emitting, nonlinear optical (NLO), and ferroelectric applications. A notable subset within this category is luminescent ferroelectrics, which have garnered considerable attention for their potential in integrated photoelectronic devices. In this study, we employed an organic amine halogenation strategy (also referred to as halogen engineering), which is renowned for its efficacy in inducing polar order through crystal engineering. Consequently, we synthesized a layered Ruddlesden-Popper (RP) lead chloride comprising 3-chloropropylammonium cations (CPA+), with the chemical formula CPA2PbCl4. This compound features as many as four temperature-dependent crystal phases, with phase transitions observed at T1 = 353.1 K (343.9 K), T2 = 211.7 K (208.6 K), and T3 = 182.0 K (178.2 K) in the heating (cooling) cycles. Employing a multitechnique approach─including thermal analysis, X-ray diffraction, dielectric and pyroelectric current measurements, Raman spectroscopy, and second-harmonic generation (SHG) studies─we determined the mechanisms of the structural phase transitions. Our findings demonstrate polar order of phase II (space group Cmc21), phase III (space group Pna21), and phase IV (space group Pca21), while also confirming the centrosymmetric nature of phase I (space group Cmce). X-ray diffraction data revealed that the I to II PT is of a ferroelectric nature, devoid of ferroelastic strain, a conclusion further supported by pyroelectric measurements. CPA2PbCl4 features negative linear thermal expansion and broadband emission, which transitions to white light above 180 K. Remarkably, CPA2PbCl4 also demonstrates high-temperature SHG on-off switching with a high contrast ratio of 300:1 along with good switching stability, as evidenced by SHG cycling studies at heating/cooling rates ranging from 5 to 50 K/min. This SHG study also sets new standards for the field of SHG switching by providing a method to quantify the thermal responsiveness of SHG-switchable materials using the treq (time requirement) parameter. Overall, our findings show that the halogenation strategy has led to the discovery of a rare example of an RP perovskite exhibiting coexistence of white-light emission, SHG on-off thermal bistability, ferroelectricity, and negative linear thermal expansion.

Consequences of the Pb-S Bond Formation for Lead Halide Perovskites.

Lead halide perovskites are structurally not stable due to their ionic bonds. Using sulfur agents in the crystal growth improves the stability and performance of the photovoltaic and light-emitting devices. In this theoretical work, we use a small toy S-radical in place of A cation in the bulk of lead iodide perovskite, and highlight the significance of the Pb-S covalent-double-bond formation for: the charge redistribution on the neighboring bonds that also turn to be covalent, phase transformation to a stable non-perovskite structure, and superior optoelectronic properties. The chemical analysis was performed with the Quantum Theory of Atoms In Molecules (QTAIM) and Non-Covalent Interactions (NCI) index. Excitonic properties were obtained from the solution of ab initio Bethe-Salpeter equation. Presence of the spin-orbit coupling triggers an interplay between the Frenkel and charge-transfer multiexcitons, switching between the photovoltaic and laser applications. Multiexcitons obey the exciton-fission preconditions.

Solvent-Free in Situ Synthesis of a CsPbBr3 Nanocrystal/ZrO2 Hybrid Phosphor with Excellent Thermal Stability for White Light-Emitting Diodes.

All-inorganic cesium lead halide perovskite CsPbX3 (X = Cl, Br, I, or mixed) nanocrystals (NCs) are emerging as promising candidates in light-emitting diodes (LEDs) owing to their excellent luminescent properties. However, CsPbX3 NCs are extremely susceptible to the elevated temperature associated with prolonged LED operation due to their low formation energy and soft ionic crystal structure. Here, CsPbBr3 NCs hybridized with ZrO2 were in situ synthesized by a rapid solvent-free method under an ambient environment for the first time, which was also suitable for large-scale production. The as-prepared CsPbBr3/ZrO2 hybrid phosphor not only presented enhanced photoluminescence (PL) properties but also exhibited improved thermal stability. For example, the PL intensity of the CsPbBr3/ZrO2 hybrid phosphor could retain 70% of the initial value at 130 °C, obviously higher than that of 34% for pure CsPbBr3. The exceptional thermal stability of the CsPbBr3/ZrO2 hybrid phosphor could be attributed to the introduction of ZrO2, which effectively preserved the initial perovskite structure of CsPbBr3 during heat treatment, as confirmed by XRD results. The as-prepared CsPbBr3/ZrO2 hybrid phosphor had great practical applications verified by the construction of white LEDs (WLEDs) with a luminance degradation of only 9% after continuous operation for 24 h at the initial luminance of 2000 cd m-2, which was significantly better than that of 63% for control WLEDs. The proposed thermally stable hybrid phosphor is expected to greatly contribute to the industrialization process of perovskites.

Stable Halide Perovskite CsPbBr3 Nanocrystals Assisted by Covalent-Organic Frameworks for Electrochemiluminescence Analysis in an Aqueous Medium.

Lead halide perovskites have garnered attention as promising electrochemiluminescence (ECL) emitters owing to their superior photophysical characteristics. However, their poor water stability severely restricts their application in aqueous media for ECL. In this study, inorganic perovskite CsPbBr3 was assembled in situ in the imine-linked covalent-organic framework (COF-LZU1) as a novel ECL emitter. The expansive surface area and robust hydrophobic architecture of COF-LZU1 not only improved the water stability of CsPbBr3 but also guaranteed its exceptional ECL performance. The novel composite nanoluminescent material was coated onto an indium tin oxide (ITO) electrode via spin-coating and calcination processes to serve as an electrochemiluminescence (ECL) platform. A sensor was developed by combining a DNA hydrogel target-induced release system with a platform using ascorbic acid (AA) as a coreactant and T-2 toxin as the target analyte model. This method achieved a detection limit as low as 3.56 fg·mL-1 and was successfully applied to the analysis of the T-2 toxin content in corn samples. This study offers a novel path for the advancement of perovskite-based ECL emitters and their utilization in aqueous environments within the ECL field.

Strong Grain Boundary Passivation Effect of Coevaporated Dopants Enhances the Photoemission of Lead Halide Perovskites.

Herein, we demonstrate that coevaporated dopants provide a means to passivate buried interfacial defects occurring at perovskite grain boundaries in evaporated perovskite thin films, thus giving rise to an enhanced photoluminescence. By means of an extensive photophysical characterization, we provide experimental evidence that indicate that the codopant acts mainly at the grain boundaries. They passivate interfacial traps and prevent the formation of photoinduced deep traps. On the other hand, the presence of an excessive amount of organic dopant can lead to a barrier for carrier diffusion. Hence, the passivation process demands a proper balance between the two effects. Our analysis on the role of the dopant, performed under different excitation regimes, permits evaluation of the performance of the material under conditions more adapted to photovoltaic or light emitting applications. In this context, the approach taken herein provides a screening method to evaluate the suitability of a passivating strategy prior to its incorporation into a device.

Photodiodes Made of Cascade Perovskite Single Crystals with Passivation Layers for High-Energy-Resolution γ-ray Spectroscopy.

Lead halide perovskite single crystals (LHPSC) are promising for room-temperature γ-ray spectroscopy in radiation detection. While MA(CH3NH3)-based LHPSCs are the most straightforward and cost-effective to synthesize from solution, their performance in γ-ray spectroscopy is hindered by significant noise and ion migration at high bias, which degrades their energy resolution (ER). The work introduced an n-type/intrinsic/n-type photodiode incorporating passivation layers of MA-based LHPSCs, grown through solution-process epitaxial growth. This single-polarity device demonstrated an outstanding ER of 3.6% for 662 keV γ-ray photons. Overall, this work provides useful information for developing room-temperature γ-ray detectors based on solution-processed lead halide perovskites.

Efficient and selective photocatalytic oxidation of benzylic alcohols with built-in electric field CsPbBr3/SiO2 nanocomposites through Fe3+ gradient doping

Lead halide perovskite nanocrystals (PNCs) have emerged as promising materials for photocatalysis due to their exceptional optoelectronic properties, yet achieving efficient charge separation and selective oxidation reactions remains a significant challenge. In this study, we report the synthesis of Fe3+-doped CsPbBr3/SiO2 nanocomposites (Fe-PNCs/SNPs) with gradient energy levels, designed to enhance photocatalytic performance. Our results demonstrate that Fe3+ doping introduces mid-gap states, promotes photoinduced charge separation, and generates reactive oxygen species (ROS) such as O2− and OH radicals under sunlight-simulating light irradiation from a 300 W Xe arc lamp. The Fe20-PNCs/SNPs catalyst achieved over 99 % conversion of benzyl alcohol to benzaldehyde with high selectivity and stability in the ethanol under ambient conditions. Additionally, the catalyst exhibited excellent recyclability and broad substrate tolerance. These findings highlight the innovative design of gradient energy levels in perovskite nanocomposites, offering a new strategy for enhancing photocatalytic efficiency in selective organic transformations.

Layered and Low-Dimensional Lead, Silver, and Bismuth Halide Perovskites Directed by Halogen-Substituted Spacer Cations

Layered and Low-Dimensional Lead, Silver, and Bismuth Halide Perovskites Directed by Halogen-Substituted Spacer Cations

Enhancing Extraction and Suppressing Cooling of Hot Electrons in Lead Halide Perovskites by Dipolar Surface Passivation.

Slowing hot carrier (HC) cooling and improving HC extraction are considered two pivotal factors for enhancing power conversion efficiency in emerging HC photovoltaic applications of perovskites and other materials. Employing ab initio quantum dynamics simulations, we demonstrate the simultaneous slow cooling and efficient extraction of hot electrons at the C60/CsPbI3 interface through dipolar surface passivation with phenethylammonium and 4-fluorophenethylammonium ligands. The passivation effectively suppresses I-Pb lattice vibrations, weakens the hot electron-phonon interaction in CsPbI3, and thus slows down the HC cooling. At the same time, the dipolar surface passivation elevates the LUMO + 1 state in C60 and reduces the energy gap for HC extraction. Concurrently, higher-frequency vibrations of the dipolar layer enhance the coupling between C60 and CsPbI3, promoting efficient HC extraction further. These phenomena are intensified with increased polarity of the dipolar layer. Furthermore, we find that dipolar passivation has the opposite influence on cold electron collection at the band edge, underscoring the fact that the observed improvement in photovoltaic performance stems preferentially from the effective utilization of HCs rather than cold electrons. The work provides a new strategy for achieving high-performance HC perovskite solar cells.

Antisolvent controls the shape and size of anisotropic lead halide perovskite nanocrystals

Colloidal lead halide perovskite nanocrystals have potential for lighting applications due to their optical properties. Precise control of the nanocrystal dimensions and composition is a prerequisite for establishing practical applications. However, the rapid nature of their synthesis precludes a detailed understanding of the synthetic pathways, thereby limiting the optimisation. Here, we deduce the formation mechanisms of anisotropic lead halide perovskite nanocrystals, 1D nanorods and 2D nanoplatelets, by combining in situ X-ray scattering and photoluminescence spectroscopy. In both cases, emissive prolate nanoclusters form when the two precursor solutions are mixed. The ensuing antisolvent addition induces the divergent anisotropy: The intermediate nanoclusters are driven into a dense hexagonal mesophase, fusing to form nanorods. Contrastingly, nanoplatelets grow freely dispersed from dissolving nanoclusters, stacking subsequently in lamellar superstructures. Shape and size control of the nanocrystals are determined primarily by the antisolvent’s dipole moment and Hansen hydrogen bonding parameter. Exploiting the interplay of antisolvent and organic ligands could enable more complex nanocrystal geometries in the future.

Pt and Pt‐group transition metal 0D vacancy ordered halide perovskites: A review

AbstractLead halide perovskites (LHPs), have attracted considerable attention across various applications owing to their exceptional optoelectronic properties. However, the main challenge hindering the broad adoption of lead halide perovskites lies in their stability and toxicity. In this review, we summarize the outstanding properties of platinum (Pt) halide perovskites, with a particular focus on the stability and applications of Cs2PtI6 and its derivatives. Cs2PtI6 has shown promising efficiency for photovoltaic devices, as well as photoelectrochemical water splitting with stable behavior in acid or basic conditions. Cs2PtI6 also shows promise in gas sensing and thermoelectric devices. The emergence of 2D Pt (II) halide perovskites opens up new avenues for environmentally friendly materials for photonic and optoelectronic devices like room temperature phosphoresce and triplet‐triplet annihilation (TTA) based up‐conversion.image

Back Cover

The in‐situ post‐synthetic treatment of CsPbBr₃ nanocrystals confined within nanoporous silica microspheres enhances their optical properties, addressing key challenges in lead halide perovskites. Surface passivation with Br⁻ ions boosts photoluminescence quantum yield, while Mn²⁺ doping introduces a new emission band, enabling precise control of optical properties. Coating with a SiO₂ shell further enhances the stability of the nanocrystals in polar solvents, expanding their potential for diverse applications. More details are discussed in the article by Huang et al. on pages 2779—2787. image

Achieving vertical orientation films with superior environmental stability in quasi-2D lead iodide perovskites

The incorporation of a spacer cation to improve the stability of lead halide perovskites entails a trade-off, notably compromising film quality and device performance, particularly in quais-2D variants employing a higher proportion of hydrophobic, larger spacer cations. Addressing this challenge in quasi-2D perovskite-based devices requires enhancement in film morphology, crystallinity, and vertical orientation to optimize charge transport. Herein, we present a simple one step spin coating synthesis approach for producing PEA2MAn-1PbnI3n+1 (n = 5–2) thin films from a single precursor solution. Notably, our method operates at room temperature without the need of usually toxic anti-solvent or specialized additives, resulting in high quality crystalline films that are vertically oriented and smooth. We systematically investigate the impact of annealing processes on crystal structure, including gradient annealing (GA) as well as thermal annealing at 100℃ for durations of 10 and 15 minutes. Our findings indicate that the films with n = 4 exhibits superior crystallinity and vertical crystallographic orientation, alongside reduced roughness, and minimal contamination of the lower n mixtures. Gradient annealing notably enhances the crystallinity of n = 3 films. While the surface of all the films appears smooth with flake-like structure, the n = 2 sample notably exhibits pitting.

Emerging class of SrZrS3 chalcogenide perovskite solar cells: Conductive MOFs as HTLs - A game changer?

The emerging SrZrS3 chalcogenide perovskite has been suggested as a potential alternative to lead halide perovskites, offering unique optoelectronic properties while addressing concerns such as lead toxicity and instability. Our research explored its potential, demonstrating the use of conductive metal-organic frameworks (c-MOFs) Cu-MOF ({[Cu2(6-mercapto nicotinate)]·NH4}n), NTU-9, Fe2(DSBDC), Sr-MOF ({[Sr(ntca)(H2O)2]·H2O}n), Mn2(DSBDC), and Cu3(HHTP)2 as promising substitutes for traditional HTLs via SCAPS-1D. By systematically optimizing the absorber and HTL properties, maximum PCEs of 30.60 %, 29.78 %, 28.29 %, 28.44 %, 28.80 %, and 28.62 % were accomplished for solar cell devices based on the aforementioned MOFs, respectively. Comparative analysis of initial and optimized solar cells using energy band diagrams, Nyquist plots, and quantum efficiency revealed that optimized devices consistently raised quasi-Fermi levels, significantly enhanced conductivity, and boosted solar cell performance. Additionally, the high recombination resistance of 1.4 × 107 Ω cm2, improved spectral response of 35 % in the NIR region, and heightened built-in potential (∼0.99 V) resulted in the highest efficiency of 30.60 % for Cu-MOF solar cells. This research highlights the promising potential of novel SrZrS3 absorbers and the utilization of c-MOFs as HTLs in solar cells, positioning them as a game changer in the PV field.

Self-passivation of Halide Interstitial Defects by Organic Cations in Hybrid Lead-Halide Perovskites: Ab Initio Quantum Dynamics.

Halide interstitial defects severely hinder the optoelectronic performance of metal halide perovskites, making research on their passivation crucial. We demonstrate, using ab initio nonadiabatic molecular dynamics simulations, that hydrogen vacancies (Hv) at both N and C atoms of the methylammonium (MA) cation in MAPbI3 efficiently passivate iodine interstitials (Ii), providing a self-passivation strategy for dealing with the Hv and Ii defects simultaneously. Hv at the N site (Hv-N) introduces a defect state into the valence band, while the state contributed by Hv at the C site (Hv-C) evolves from a shallow level at 0 K to a deep midgap state at ambient temperature, exhibiting a high environmental activity. Both Hv-N and Hv-C are strong Lewis bases, capable of capturing and passivating Ii defects. Hv-C is a stronger Lewis base, bonds with Ii better, and exhibits a more pronounced passivation effect. The charge carrier lifetimes in the passivated systems are significantly longer than in those containing either Hv or Ii, and even in pristine MAPbI3. Our demonstration of the Hv and Ii defect self-passivation in MAPbI3 suggests that systematic control of the relative concentrations of Hv and Ii can simultaneously eliminate both types of defects, thereby minimizing charge and energy losses. The demonstrated defect self-passivation strategy provides a promising means for defect control in organic-inorganic halide perovskites and related materials and deepens our atomistic understanding of defect chemistry and charge carrier dynamics in solar energy and optoelectronic materials.

Structural Modifications due to Bi-Doping in MAPbBr3 Single Crystals and Their Impact on Electronic Transport and Stability.

Doping strategy in lead halide perovskites is essential to enhance its optoelectrical properties and expand the potential applications. In this work, the mechanisms, for how dopants affect the overall structural, optical, electrical, and chemical properties and stability of lead halide perovskite materials, are investigated. This is done by specifically considering various bismuth (Bi)doping concentrations in MAPbBr3 single crystals grown using the inverse temperature crystallization method. The resultant doped single crystals exhibit a saturation point when Bi concentration exceeds 0.063% which is considered an optimum doping point. The highest thermal stability is also achieved at this doping concentration among the doped single crystals. This study clearly identifies how Bi doping affects the properties of MAPbBr3 and extends to consider stability, which has not been fully considered for MA-based perovskites previously. This will provide a clear understanding of evaluating doped perovskite materials for enhanced material properties, device performance, and stability.

Electronic Structure of Trions in Layered Hybrid Lead Halide Perovskites

Electronic Structure of Trions in Layered Hybrid Lead Halide Perovskites

Breaking Barriers in Chalcogenide Perovskite Synthesis: A Generalized Framework for Fabrication of BaMS3 (M═Ti, Zr, Hf) Materials

AbstractChalcogenide perovskites have garnered increasing attention as stable, non‐toxic alternatives to lead halide perovskites. However, their conventional synthesis at high temperatures (>1000 °C) has hindered widespread adoption. Recent studies have developed low‐to‐moderate temperature synthesis methods (<600 °C) using reactive precursors, yet a comprehensive understanding of the pivotal factors affecting reproducibility and repeatability remains elusive. This study delineates the critical factors in the low‐temperature synthesis of BaMS3 (M═Zr, Hf, Ti) compounds and presents a generalized framework. Innovative approaches are developed for synthesizing BaMS3 compounds using this framework involving organometallics for solution deposition. The molecular precursor routes, employing metal acetylacetonates to generate soluble metal–sulfur bonded complexes and metal–organic compounds to produce soluble metal‐thiolate, metal‐isothiocyanate, and metal‐trithiocarbonate species, are demonstrated to yield carbon‐free BaMS3. These methods have achieved the most contiguous films of BaZrS3 and BaHfS3 using solution deposition to date. Furthermore, a hybrid solution processing method involving stacking sputter‐deposited Zr and solution‐deposited BaS layers is employed to synthesize a contiguous, oxygen‐free BaZrS3 film. The diffuse reflectance measurements indicate a direct bandgap of ≈ 1.85 eV for the BaZrS3 films and ≈ 2.1 eV for the BaHfS3 film under investigation.