Potential Leaching Research Articles

Green Technology for Baru Oil Extraction Using Solar Energy: Assessing Extraction Efficiency and Process Parameters.

This study explores the application of solar concentrator technology for Baru oil extraction, a crucial resource in various industries. Through systematic experimental investigations, the effects of particle size and solvent flow rate on extraction efficiency were evaluated. Results demonstrate that smaller particle sizes (1.01 mm) significantly enhance extraction efficiency, achieving yields up to 89.25%, compared to larger particles (2.18 mm) with yields averaging 54.32% (±3.2%). Additionally, the solvent flow rate of 25 mL/min maximized extraction efficiency. These findings highlight the critical influence of particle size and solvent flow rate on extraction performance and underline the potential of solar-assisted leaching as a sustainable and environmentally friendly alternative to conventional extraction methods. The research provides a novel contribution to the field by advancing sustainable oil extraction practices and offering a viable solution for small-scale producers to increase the value of their agricultural products.

Insights into the environmental risk variation of heavy metals from MSWI fly ash after thermal plasma vitrification

Thermal plasma vitrification of municipal solid waste incineration fly ash (MSWI FA) shows potential for effective dioxin degradation and heavy metal immobilization. However, the environmental risks posed by heavy metals released after vitrification remain understudied. This work investigates two types of MSWI FA—circulated fluidized bed fly ash (CFA) and mechanical grate furnace fly ash (GFA)—blended with waste glass and vitrified via thermal plasma treatment. The physical and chemical properties of the original FA and vitrified glasses (CFA-glass and GFA-glass) were analyzed. Environmental risks were assessed using the risk assessment code (RAC) and the overall pollution toxicity index (OPTI). Results showed that CFA, with higher Si and Al content, exhibited better vitrification than GFA. Plasma vitrification reduced chlorine content from 5.79 % and 10.59 % to 0.22 % and 0.16% due to Cl volatilization. Heavy metals with low boiling points, such as Cd and Pb, were significantly reduced, while high-boiling-point Cr, Ni remained and the acid resistance of vitrificated FA significantly deteriorated, which increased the potential leaching of heavy metals. In alkaline conditions, the OPTI value of CFA-glass dropped to 2, indicating a strong immobilization effect. This study provides critical insights for managing heavy metals in fly ash through thermal plasma vitrification.

Spatial variations and vertical migration potentials of petroleum hydrocarbons with varying chain lengths in soils of different depths: Roles of solid and dissolved organic matters and soil texture

Petroleum hydrocarbons (PHs) in contaminated sites may threaten human health and ecological safety, while the environmental behaviors of PHs with varying carbon chains and critical influencing factors need to be elucidated, thus facilitating efficient risk management. This study explored the occurrence characteristics and spatial variations of different PHs at the depths of 0–10 m in an abandoned industrial site, as well as evaluated the effects of solid organic matter (SOM), dissolved organic matter (DOM), and soil texture on the migration potentials of PHs with varying carbon chains. Furthermore, the leaching potentials of different PHs were integrated into their risk assessment. The total concentrations of PHs in contaminated soils ranged from 22.7 to 397 mg/kg in contaminated soils, and the long-chained PHs (C22-C40) represented the major components with an average contribution of 46.9 %, followed by short-chained PHs (C10-C12, 32.0 % average) and medium-chained PHs (C13-C21, 21.1 % average). As soil depth increased, a declining trend was observed in the proportions of long-chain PHs, with an augmentation in the relative abundance of short-chain PHs. The random forest model coupling redundancy analysis showed that SOM was the major contributor to the occurrence and vertical attenuation of PHs with longer carbon chains in underground soils, with clay component exerting a greater additional effect than silt and sand components. While DOM in soils exhibited a relatively high contribution to the retention of PHs with short carbon chains. These results demonstrated the significant influence of SOM and clay on the behavior of long-chained PHs and DOM on that of short-chained ones. Besides direct human exposure, the leaching potentials of PHs, particularly short-chained ones, in soils should be considered for a more comprehensive risk assessment. The findings of this study may assist with the behavior modelling and prediction of different PHs as well as the corresponding risk control.

First Insight into the Mobilization and Sequestration of Arsenic in a Karstic Soil during Redox Changes.

Karst terrains provide drinking water for about 25% of the people on our planet, particularly in the southwest of China. Pollutants such as arsenic (As) in the soil can infiltrate groundwater through sinkholes and bedrock fractures in karst terrains. Despite this, the underlying mechanisms responsible for As release from karst soils under redox changes remain largely unexplored. Here, we used multiple synchrotron-based spectroscopic analyses to explore As mobilization and sequestration in As-polluted karstic soil under biogeochemical conditions that mimic field-validated redox conditions. We observed that As in the soil exists primarily as As(V), which is mainly associated with Fe(oxyhydr)oxides. The concentration of the dissolved As was high (294 μM) and As(III) was dominant (∼95%) at low Eh (≤-100 mV), indicating the high risk of As leaching under reducing conditions. This As mobilization was attributed to the fact that the dissolution of ferrihydrite and calcite promoted the release and reduction of associated As(V). The concentration of the dissolved As was low (17.0 μM) and As(V) was dominant (∼68%) at high Eh (≥+100 mV), which might be due to the oxidation and/or sequestration of As(III) by the recrystallized ferric phase. Our results showed that the combined effects of the reductive release of As(V) from both ferric and nonferric phases, along with the recrystallization of the ferric phase, govern the redox-induced mobilization and potential leaching of As in soils within karst environments.

From leaching data to release estimates: Screening and scenario assessments of electric arc furnace (EAF) slag under unencapsulated use

Electric arc furnace (EAF) slag is the non-metallic byproduct of the primary U.S. steelmaking process. Much of the slag is marked for secondary uses as aggregates. EAF slags used as construction fill or residential groundcover are directly exposed to the environment, raising concerns of potential leaching impacts. Leaching data of EAF slags as function of eluate pH (Method 1313) and liquid-to-solid ratio (Method 1314) were used to refine an initial list of constituents of potential concern to those with potential to leach at concentrations greater than project thresholds, and to estimate release from EAF slags when used as unencapsulated groundcover. Screening assessment identified 11 of over 20 constituents requiring further assessment. Scenario-based assessments results showed that constituents with high available content and low leaching concentrations (Al, Cr, Co, Mn, Se) are persistent in contacting water over the assessment period while those with limited available content (As, Ba, Mo, V) were depleted. Aging decreased the release of Se while increasing Tl release, likely through a combination of hydration, carbonation, and cracking processes. Increasing fill depth and infiltration rates did not alter leaching concentrations; however, liquid-solid ratio for each assessment interval changed thereby impacting cumulative release.

Microplastic contamination of food: sources, detection methods, and health implications

Microplastic contamination in food has emerged as a significant global concern, with potential implications for human health. Microplastics, defined as plastic particles smaller than 5 mm, originate from various sources, including plastic waste fragmentation, synthetic textiles, and industrial processes. These particles have been detected in multiple food products, particularly seafood, drinking water, salt, honey, and processed foods, posing a risk of chronic exposure through ingestion. The small size of microplastics allows them to penetrate tissues and potentially enter systemic circulation, raising concerns about their bioaccumulation and toxicological effects. This review provides a comprehensive analysis of the pathways through which microplastics enter the food chain, focusing on contamination in aquatic ecosystems and food packaging. We also examine the analytical techniques used for detecting microplastics in food, including spectroscopic methods, and discuss the challenges of standardizing detection protocols. Finally, the potential health risks, including toxicity and chemical leaching, are explored, alongside recommendations for future research and regulatory strategies.

Parylene C Coating Efficacy Studies: Enhancing Biocompatibility of 3D Printed Polyurethane Parts for Biopharmaceutical and CGT Applications.

Additive manufacturing, particularly Vat photopolymerization, presents a promising technique for producing complex, tailor-made structures, making it an attractive option for generating single-use components used in biopharmaceutical manufacturing equipment or cell culture devices. However, the potential leaching of cytotoxic compounds from Vat photopolymer resins poses a significant concern, especially regarding cell growth and viability in cell culture applications. This study explores the potential of parylene C coating to enhance the inertness of a polyurethane-based photopolymer resin, aiming to prevent cytotoxicity and improve biocompatibility. The study includes an analysis of extractables from the resin and photoinitiator to evaluate the resin's composition and to define selected marker compounds for investigating the coating efficiency. The time-dependent accumulation of relevant extractable compounds over a 70-day period are assessed to address the long-term use of the coated components. The impact of irradiation on the material and the coating was evaluated, along with an accelerated aging study to address the long-term performance of the coating. Biocompatibility in terms of in vitro cell growth studies is evaluated using Chinese hamster ovary cells, a standard cell line in biopharmaceutical manufacturing. Results demonstrate that parylene C coating significantly reduces the release of cytotoxic compounds, such as the photoinitiator diphenyl(2,4,6-trimethylbenzoyl)phosphine oxide (TPO). Although accelerated aging indicates a reduction in the barrier properties of the coating over time, the parylene C coating still effectively slows the release of extractables and significantly improves cell compatibility of the 3D printed parts. The findings suggest that parylene C-coated components can be safely integrated into biopharmaceutical manufacturing processes, with recommendations to minimize storage times between coating application and use to ensure optimal performance.

Effectiveness of the Sustainable Manure Pile Model for Ammonia Emission and Soil

In order to reduce odor emissions and surface water pollution while storing manure in field heaps near a barn, there is a challenge in properly designing manure-storage areas. Therefore, it is important to assess what solutions and conditions, considering environmental requirements, should be considered when storing manure in field heaps. The goal of the research is to determine the impact of various factors on the risk of nutrient leaching, soil, and gas emissions from solid manure heaps, considering climatic factors in the environment. Through various scientific studies, a manure pile model has been developed and evaluated for its impact on the risk of potential leaching and odor emissions (using hyperspectral gas emission analysis mass flow method) from manure and the dynamics of the 0–80 cm soil layer properties (nitrate (N-NO3) and nitrite (N-NO2), ammonia (NH3), mineral, and total N). Based on the research results, requirements for manure management and storage during the prohibited fertilization period were established, considering the requirements for nitrates from agricultural sources in Lithuania. An optimal new manure heap model has been identified—a layer of not less than 20 cm of compacted straw (density 150–200 kg m−3) or a 10 cm layer of peat for absorbing manure slurries is formed on the soil surface, the manure heap is surrounded by an earth embankment not less than 30 cm high, the manure heap is covered with a layer of finely chopped straw not less than 10 cm thick, or 5 cm of sawdust, or 5 cm of peat. The manure is stored in the heap for 6–12 months. Following the research results, requirements for manure management and storage during the prohibited fertilization period were established, considering the requirements for nitrates from agricultural sources in Lithuania, applicable to the northern part of the temperate climate zone and applying similar requirements to the relevant countries.

A survey study on arsenic speciation in coal fly ash and insights into the role of coal combustion conditions

Coal fly ashes (CFAs) are the low-density byproducts of the coal combustion process. Improper or uncontrolled CFA disposal poses significant environmental and health concerns due to the potential leaching of toxic heavy metals such as arsenic (As). Previous studies have investigated the content and speciation of As in different CFA samples, yet systematic information on As speciation in CFA with representative coal source and combustion conditions is still missing. Based on a recent survey study on the typical coal sources and combustion conditions across the U.S., this study selected 19 representative CFA samples to systematically investigate As speciation and potential correlations with these parameters. The composition, morphology, mineralogy, and As speciation of these CFA samples were characterized by complementary analytical, microscopic, and spectroscopic techniques. Synchrotron X-ray spectroscopy and microscopy analyses revealed the dominant As oxidation state to be As(V) and with strong associations to Ca, with the exception of 3 samples that had 19–51% As(III), likely due to the use of selective catalytic reduction (SCR) process. Principal component analysis was conducted to identify potential correlations of As concentration and oxidation state with parameters such as major element content, loss on ignition (LOI), average particle size, coal source, and combustion condition. Al2O3 and FeO content were found to capture a majority of the variability. Results from this study provide fundamental basis for understanding the correlations between coal source, combustion conditions, CFA characteristics, and As speciation, and providing insights for downstream beneficial utilization or disposal management.

Mineralogy of Lateritic Weathering Profiles Developed on the Rocks under a Sub-equatorial Monsoon Climate: Case of the Bambouto Mountains

ABSTRACT The main objective of this work is to make a comparative assessment of the mineralogy on weathering profiles resulting from the alteration of the different rocks in an equatorial microclimate of altitude. This was carried out in the lower flank of the southern slope of the Bambouto Mountains. Mineralogical analysis and normative restructuring have given very interesting results on the profiles, between the basement rocks and the surface/cover rocks. Given that the alteration pathways of the basement rocks are different, they are similar within the zone of containment and potential leaching. Meanwhile, the cover rocks vary from one domain to another: virtual weathering, potential confinement, potential and virtual weathering, and induration. The alterological activity is very intense in the profile on trachybasalt. The predominant weathering processes in all cases are allitization and monosialitization, which are marked by a singular phenomenon of ferrolysis. The characteristic minerals of this profile are kaolinite and diopside. The weathering profile on biotite and hornblende granitoid is not very differentiated and is particularly rich in quartz (max: 40 weight-%) and microcline (max: 40 weight-%). The soils developed on granitoid, adopt elastic-fragile deformation to elastoplastics with sharp break in relation to the load applied. The alteration profile on orthogneiss is poorly differentiated, and thin, with a low degree of alteration. Hydrolytic alteration by monosiallitization marked this profile. This is particularly rich in quartz (max: 100 weight-%) and kaolinite (max: 57 weight-%). The profile on anatexite is particularly rich in quartz (max: 66 weight-%) and kaolinite (max: 40 weight-%). The normative restructuring confirmed over 98 weight-% of the various minerals obtained and thus made it possible to better characterize the alteration and its application in geotechnics. These soils constitute potential deposits of chromatogenic minerals: kaolinite, hematite, goethite, gibbsite, magnetite, biotite.

Improved greywater quality after biofiltration with a fibre-biofilter derived from plantain pseudo stem

In this study, we addressed the prevalent issue of untreated greywater discharge into waterbodies in many developing countries, despite the associated public health risks. Our approach involved utilizing fibers extracted from plantain pseudo-stems to enhance the quality of greywater through simple biofiltration setups. Greywater sourced from the GETFund Hostel of the University of Energy and Natural Resources in Sunyani, Ghana, served as the focal point of our investigation. Through the application of this biofilter, we achieved notable reductions in two crucial parameters for assessing greywater quality: biochemical oxygen demand (BOD) and chemical oxygen demand (COD), averaging at 30.4 % and 28.67 %, respectively. Furthermore, we conducted comparative analyses between the efficacy of plantain pseudo-stem fibers and carbonized coconut shell adsorbent, both individually and in composite form as biosorbents. While certain combinations of biofilters led to slight increases in conductivity, pH, and total dissolved solids (TDS) in the treated greywater, these variations were anticipated and attributed to potential organic matter leaching during the biofiltration process. Employing Fourier-transform infrared (FT-IR) spectroscopy, we detected significant spectral changes indicative of successful organic matter removal from the greywater. Specifically, we observed an intensified phenolic hydroxyl (OH) peak at 3300 cm⁻¹, which shifted marginally to 3335 cm⁻¹ post-biofiltration. Additionally, the emergence of a carboxylic hydroxyl stretch at 2850 cm⁻¹ post-biofiltration provided strong evidence supporting the efficacy of our approach in mitigating organic contaminants in greywater.

Study on preparing sustainable limestone calcined clay cement (LC3) through CO2-active treatment of municipal solid waste incineration fly ash (IFA)

Municipal solid waste incineration fly ash (IFA) is theoretically more suitable for forming a composite cementitious system with cement and calcined clay compared to inert limestone due to its pozzolanic activity. In addition, IFA contains high levels of alkaline calcium compounds that have the potential for carbonation. The study examined the improvement of CaCO3 content within IFA facilitated by CO2-active (CIFA), replacing limestone in limestone calcined clay cement (LC3), and creating sustainable cementitious materials. The hydration behavior, heavy metal morphologies and mechanical properties of (C)FC3 were studied. The research indicates that introducing IFA adversely affects the initial hydration process of the system, but this inhibition is alleviated by using CIFA. This is facilitated by the reduction in sulfate dissolution rate attributed to the formation of carbonate shells. The incorporation of IFA into the system leads to the effective utilization of Ca(OH)2, thereby enhancing the pozzolanic reaction of the calcined clay. Consequently, (C)FC3 show higher compressive strength than LC3 at 56 d, with L15, F15 and CF15 achieving 29.9 MPa, 39.6 MPa and 46.8 MPa, respectively. While there is an increase in the exchangeable and acid-soluble states in CFC3, the elevation of oxidizable and residual states contributes to a reduced potential for total leaching in harsh environments. The excellent mechanical properties and environmental stability confirm the feasibility of using (C)IFA for LC3.

Highly efficient removal of TBBPA and ATE by photocatalytic degradation with green synthesized NiO@CuHCF p-n heterojunction: Optimizations, kinetics, and mechanistic insights

Because of their incorrect disposal and persistence in environmental media, two frequently used brominated flame retardants (BFRs), tetrabromobisphenol A (TBBPA) and allyl 2,4,6-tribormorphenul ether (ATE) pose serious health concerns. A green technique was used to synthesize the NiO@CuHCF nanohybrids, and their ability to degrade target BFRs was examined. The optimal removal circumstances included a dose of 10 mg of nanocatalyst, a pH of 9, and 10 mg L−1. In 120 minutes, TBBPA and ATE were practically completely eradicated followed by first-order kinetics. High surface area, visible light active band gap, low recombination rate, robust cross-linking with contaminants, and catalytic free radical generation are some of the unique features of NiO@CuHCF. Under 120 minutes, the NiO@CuHCF was able to achieve an ideal elimination rate of 91–97 % and a debromination rate of over 75.4–82.3 %. After 8 cycles, the composite demonstrated excellent catalytic performance and minimal catalyst loss, demonstrating its stability and reusability. In comparison to parent nanoparticles, the investigation revealed that NiO-modified CuHCF exhibited higher degrading efficiency. To evaluate the catalytic efficacy of NiO@CuHCF, the actual sample was also analyzed. The hypothesis that the degradation efficiency of leachate BFRs was lower than that of controlled ones was rejected due to the potential leaching of extra analyte. Major reaction products or intermediates were discovered using HPLC and GC-MS, which also suggested a possible degradation pathway. NiO@CuHCF nanohybrid is a promising nanomaterial for the photodegradation of BFRs and other pollutants from environmental matrices, with further research and development enhancing their practical implementation.

Direct extraction of lithium from ores by electrochemical leaching

With the rapid increase in lithium consumption for electric vehicle applications, its price soared during the past decade. To secure a reliable and cost-effective supply chain, it is critical to unlock alternative lithium extraction resources beyond conventional brine. In this study, we develop an electrochemical method to directly leach lithium from α-phase spodumene. We find the H2O2 promoter can significantly reduce the leaching potential by facilitating the electron transfer and changing the reaction path. Upon leaching, β-phase spodumene shows a typical phase transformation to HAlSi2O6, while leached α-phase remains its original crystal phase with a lattice shrinkage. To demonstrate the scale-up potential of electrochemical leaching, we design a catalyst-modified high-throughput current collector for high loading of suspended spodumene, achieving a leaching current of 18 mA and a leaching efficiency of 92.2%. Electrochemical leaching will revolutionize traditional leaching and recycling processes by minimizing the environmental footprint and energy consumption.

Positively Charged Biodegradable Polymersomes with Structure Inherent Fluorescence as Artificial Organelles.

Polymersomes, nanosized polymeric vesicles, have attracted significant interest in the areas of artificial cells and nanomedicine. Given their size, their visualization via confocal microscopy techniques is often achieved through the physical incorporation of fluorescent dyes, which however present challenges due to potential leaching. A promising alternative is the incorporation of molecules with aggregation-induced emission (AIE) behavior that are capable of fluorescing exclusively in their assembled state. Here, we report on the use of AIE polymersomes as artificial organelles, which are capable of undertaking enzymatic reactions in vitro. The ability of our polymersome-based artificial organelles to provide additional functionality to living cells was evaluated by encapsulating catalytic enzymes such as a combination of glucose oxidase/horseradish peroxidase (GOx/HRP) or β-galactosidase (β-gal). Via the additional incorporation of a pyridinium functionality, not only the cellular uptake is improved at low concentrations but also our platform's potential to specifically target mitochondria expands.

Analysis of current equine feeding practices in the Netherlands and identification of potential nutrient leaching and environmental contamination factors

The aim of this study was to estimate the potential for nutrient leaching based on current feeding practices of horses in the Netherlands. An online survey of horse owners collected data on the demographics of the horses (n = 274) and feeding practices. The median age was 8 years, the majority being warmblood and geldings with a mean bodyweight of 542.4 ± 101.9 kg. Most horses (85 %) had access to a limited area of pasture (<200m2 per horse), with a median grazing time of 10 hours. Grass hay was the predominant conserved forage offered (77 %) within diets. Concentrate feeds were provided to most horses (93.8 %) as well as the dietary supplements (80 %). The majority of the horses were offered high levels of metabolizable energy (ME) (90 %), starch (mean 2.4 ± 0.8 g/kg bw) and sugar intake (mean 1.4 ± 1.2 g/kg bw) compared to NRC recommendations. The estimated potential nitrogen excretion per horse per day was 228 ± 134 g, or 8.47 kg of nitrogen per ton of manure. Consequently, the estimated daily fecal excretion rates of microminerals for each horse were as follows: Copper (Cu) at 141.0 ± 151.3 mg, Zinc (Zn) at 593.1 ± 504.4 mg, Manganese (Mn) at 957 ± 541.2 mg, and Cobalt (Co) at 2.3 ± 3.5 mg. The analysis indicated that many equine diets in the Netherlands offered excess ME, CP and the minerals Cu, Zn, Mn and Co. To mitigate these concerns, it is crucial to promote sustainable feeding practices and better educate horse owners.

Role of Pyrolysis Temperature on Arsenic and Lead Leaching Potential in a Biochar-Amended Sediment

Role of Pyrolysis Temperature on Arsenic and Lead Leaching Potential in a Biochar-Amended Sediment

Groundwater Leaching Potential of Pesticides: A Historic Review and Critical Analysis

AbstractWe evaluated the main leaching indices that have been used for decades for the protection of groundwater against contamination by pesticides. We describe the index classifications in detail and discuss their advantages and limitations relative to their prediction value. Most of the indices have similarities in the types of parameters they use. Some of the similarities are basic physicochemical properties of the pesticides such as their water solubility and their organic carbon partition coefficient, as well as characteristics such as environmental persistence in the soil and some soil characteristics. It is very difficult to maintain a simple index with high predictive power. However, comparisons are allowed by many indices among different active ingredients before pesticides are classified according to the risk of being groundwater contaminants. In contrast, limitations are the scarce inclusion of pesticide byproducts in the ground, lack of prediction capacity for polar pesticides, and lack of prediction of the vulnerability of groundwater to being contaminated by pesticides. Despite the limitations of such approaches, they are of great utility, particularly for protection of groundwater from pesticide contamination when little information is available, which is the case in most developing countries and in countries with economies in transition. Caution is recommended in the analysis of information generated by these approximations, which ideally should be validated experimentally in the different application scenarios and the needs for pesticide assessment based on local information. Environ Toxicol Chem 2024;00:1–14. © 2024 SETAC

Investigation of leachate infiltration on groundwater using georesistivity and natural electric field method around Ojoou-Olayanju’s dumpsite, Ada, southwestern Nigeria

The investigation of groundwater within the dumpsite environment is highly important in geophysical study. This is because the extent of interaction between the aquiferous medium and the contaminated zone could pose a serious threat to the end users especially humans when consumed. This research aimed at investigating leachate infiltration and its potential influence on groundwater at Ojoou Olayanju's Dumpsite using combining geo-resistivity and natural electric field (NEF) methods. In this study, five dipole-dipole and five NEF measurements were obtained using the Omega resistivity meters and PQWT-150 equipment respectively. The dipole-dipole method was deployed to obtain a 2D near-surface pseudo-section, and the NEF method was used to obtain the frequency curve and profile maps of electric potential difference. The dipoledipole results revealed the lateral variation in the resistivity along the traverses, suggesting that the materials within this near-surface are heterogeneous, and the closely spaced contours' varying gradients indicate fracture, which would facilitate potential leachate filtration. The NEF results revealed curves, and a subsurface image with respect to depth and profile distance. The points of convergence signals on the frequency model correspond to a medium with low resistivity on the profile map. The conductive medium is seen as being saturated with leachate, which suggests that very large portion of the study area around the dumpsite has been contaminated by leachate. Conclusively, it was revealed that leachate filtration is evidence especially at the topsoil and due to the presence of fractured zones, the groundwater quality is at risk of contamination by continuous filtration of leachate

Nitrogen dynamics as a function of soil types, compaction, and moisture.

In this study, the complex interactions between soil types, compaction, and moisture on nitrogen (N) transformation processes such as ammonia (NH3) volatilization, ammonification, nitrification, and denitrification were examined over a 30-day period using a simulated column approach. Two soil types: loam, and sandy loam, were subjected to three compaction treatments-control, surface, and sub-surface compaction-and two moisture regimes, dry and wet. Liquid urea ammonium nitrate (32-0-0) was used as the N fertilizer source at a rate of 200 kg N ha-1. Key indicators of N transformations were measured, including residual concentrations of ammonium (NH4-N) and nitrate (NO3-N), NO3-N leaching, NH3 volatilization, and nitrous oxide (N2O) emissions. Findings revealed that compaction significantly increased residual NH4-N concentrations in deeper soil profiles, with the highest 190.80 mg kg-1 recorded in loam soil under sub-surface compaction and dry conditions. Nitrification rates decreased across both soil types due to compaction, evidenced by elevated residual NH4-N levels. Increased NO3-N leaching was observed in loam soil (178.06 mg L-1), greater than sandy loam (81.11 mg L-1), due to initial higher residual NO3- in loam soil. The interaction of compaction and moisture most affected N2O emissions, with the highest emissions in control treatments during dry weather at 2.88 kg ha -1. Additionally, higher NH3 volatilization was noted in moist sandy loam soil under control conditions at 19.64 kg ha -1. These results highlight the necessity of considering soil texture, moisture, and compaction in implementing sustainable N management strategies in agriculture and suggest recommendations such as avoiding broadcast application in moist sandy loam and loam soil to mitigate NH3 volatilization and enhance N use efficiency, as well as advocating for readjustment of fertilizer rate based on organic matter content to reduce potential NO3-N leaching and N2O emissions, particularly in loam soil.