Late Jurassic Early Cretaceous Research Articles

Significance of the Paleocene olistostrome–turbidite belt (Abant Formation) along the Intra-Pontide Suture, northern Turkey

A belt of Paleocene turbidites with olistostromes, the Abant Formation, crops out for 350 km along the Intra-Pontide Suture in northern Turkey. The suture constitutes the contact between two major Pontide tectonic units, the Istanbul and Sakarya zones, and the Abant Formation was used as evidence for the Paleocene–early Eocene closure of the Intra-Pontide ocean. We mapped and studied the Abant Formation along the Intra-Pontide Suture. The Abant Formation consists of deformed Paleocene siliciclastic turbidites with mass flows. The blocks in the olistostromes are mainly Late Cretaceous pelagic limestones; there are also Late Jurassic–Early Cretaceous, Late Cretaceous and Paleocene shallow-marine limestone blocks. Other rare block types include late Neoproterozoic and Permian granites, basalt, chert and serpentinite. The ophiolitic blocks make up less than 5% of the Abant Formation. Most of the blocks were derived from the south, from the Sakarya Zone; detrital zircon ages from the turbidite sandstones also indicate a predominantly southern source. The Abant Formation was deposited in a foreland basin, which was formed during the Paleocene collision between the Pontides and the Anatolide–Tauride Block. The basin was preferentially located on the Intra-Pontide Suture because the suture constituted an old crustal lineament.

Mesozoic tectonic evolution and dynamic mechanisms of the northern Bozhong depression of the Bohai Bay Basin, eastern China

The northern Bozhong depression of the Bohai Bay Basin in eastern China is an important area for oil and gas exploration in buried hills, which has complex structural styles and evolutionary processes. Based on 3D seismic and drilling data, the features of the Mesozoic structural deformation of the northern Bozhong depression are analyzed, and the tectonic evolution and dynamic mechanisms are also discussed. The complex Mesozoic structural styles of the northern Bozhong depression are composed of compression, strike-slip, and extension structures, which mainly trend in the near E-W, NW, NE, and NNE directions. Triggered by the collision and subduction between the North China, South China and Izanagi plates and associated stress fields of different periods, natures and directions, the northern Bozhong depression has experienced five stages of deformation at the end of the Middle Triassic, the Late Triassic, the Early-Middle Jurassic, the Late Jurassic-Early Cretaceous and the Late Cretaceous. Cyclical tectonic evolution has controlled the development of structural styles of different strikes and natures and the spatial distribution of strata in the northern Bozhong depression, providing an important foundation for hydrocarbon accumulation in buried hills.

Weathering-induced organic matter enrichment in marine-continental transitional shale: A case study on the early permian taiyuan formation in the ordos basin, china

A comparative analysis of the factors controlling organic matter (OM) enrichment between marine-continental transitional (transitional hereafter) and marine or lacustrine shales is lacking. The early Permian Taiyuan Formation in the Ordos Basin, deposited during a shift from marine to continental settings in northern China, provides a unique opportunity to unravel the differences in OM enrichment mechanisms among these shales. The Taiyuan Formation is characterized by high TOC content (average 4.50%) and kerogen type II2-III. Most samples are thermally mature with a few high to post-mature samples relating to the Late Jurassic–Early Cretaceous Yanshanian magmatism. Rare earth elements and yttrium (REY) are dominated by light- and medium-types enrichments, with distinctly positive Gd anomaly, likely due to seawater incursion. A warm and humid climate prevailed during deposition of the Taiyuan Formation, consistent with the tropical-subtropical location of the North China Plate in the early Permian. The climatic conditions promoted intense continental weathering as reflected by high Th/Sc ratios, chemical index of alteration values, and feldspar alteration to scaly kaolinite. The V/(V + Ni) ratio is inconsistent with the other redox proxies, presumably due to variations in the redox buffer supply in the transitional facies (e.g., OM and pyrite), varying burial rates and dissimilar redox potential of different elements. Hence, this proxy should be interpreted with caution in such settings. Most redox proxies indicate oxic bottom water during deposition of the Taiyuan Formation transitional shale, in contrast to typical OM enriched marine and lacustrine shales where redox stratification or euxinic conditions are common. Instead, the dominant factor for OM enrichment in transitional shales appears to have been a high influx of terrestrial weathering products, including abundant higher-plants OM, associated with preservation of OM due to rapid burial. This process minimizes the detrimental effects of oxic conditions on OM accumulation in the transitional shale facies. This mechanism may hold relevance for analogous basins elsewhere.

Characteristics and Mechanism of the Ore-Forming Fluids in the Shimensi Tungsten Polymetallic Deposit in Southeastern China

The Shimensi super-large tungsten polymetallic deposit is located in the Late Jurassic–Early Cretaceous Porphyry–Skarn tungsten ore belt in the south Yangtze metallogenic belt. There are three types of mineralization: veinlet-disseminated type, thick quartz vein type and hydrothermal cryptoexplosive breccia type. Based on geological studies, this paper presents new petrographic, microthermometric, laser Raman spectroscopic and hydrogen and oxygen isotope research on the fluid inclusions from the deposit. The results show that there are five different types of fluid inclusions: liquid-rich inclusions, vapor-rich inclusions, pure liquid inclusions, pure vapor inclusions, and fluid inclusions containing a solid crystal. The homogenization temperatures of the fluid inclusion range from 140 °C to 270 °C, the salinities are 3 wt.%–5 wt.% NaCleq and the densities of ore-forming fluid range from 0.64 g/cm3 to 0.99 g/cm3. For the analyses of laser Raman spectroscopy, the ore-forming fluids can be approximated by a Ca2+-Na+-SO42−-Cl− fluid system with small amounts of CO2, CH4 and N2. Otherwise, the data of the pressure, pH and Eh show a fluid metallogenic environment of low pressure, weak acid and weak reduction. The values of the homogenization temperature in the three types of orebodies suggest that the mineralization is characterized by a decrease in temperature under the conditions of fluid immiscibility. The H-O isotope values are interpreted to indicate that the ore-forming fluids are mainly composed of magmatic water, and meteoric water is added with the process of magma rising.

Tetradactyl footprints and plant material from the Jurassic-Cretaceous boundary, Tarapaca Region, Northern Chile

We report new ichnites corresponding to a trackway composed of three tetradactyl pedal footprints and plant remains near Southeastern Guatacondo, Tarapacá Region, within the transition of Majala and Chacarilla Formations (Late Jurassic-Early Cretaceous). The fossils were found in the context of a Copper Mining road construction at the PK23 site, Quebrada Blanca Phase 2 project, by the Teck Mining Company Quebrada Blanca S.A.We performed stratigraphical, paleobotanical, and paleoichnological studies, along with the footprint characterization and comparisons by Principal Component Analysis, and Discriminant Analysis of I-II, II-III and III-IV interdigital angles, using a large tetradactyl footprint morphological database of potential producers (dinosaurs, crocodiles, lepidosaurs, and pterosaurs). Additionally, we performed 3D pedal computer modeling kinematic analysis of the Chilesaurus diegosuarezi's 3D tetradactyl foot under two different sedimentary conditions (i.e. hard soil with superficial impression, and soft sediment with a penetrative impression), to test it as a potential trackmaker.The stratigraphic section reveals an association of siliciclastic facies, formed by the intercalation of fine-grained sandstones and wackes, with ripple marks, cross and horizontal lamination, evidencing intermittent moderate to low sedimentation energy.Among the plant material, several organs of the family Cheirolepidiaceae were identified such as, leaves and leafy branches of Brachyphyllum type, Classostrobus pollen cone, ovuliferous scales, and wood fragments related to Cupressinoxylon. The monodominance of Cheirolepidiaceae among the preserved macroflora allows inferring the characteristics of the environment in which the plants lived, highlighting halophytic, and temporarily arid conditions. Evidence as a whole, permits to interpret the depositional environment as an arid deltaic-littoral plain, temporarily covered with an ephemeral water layer associated with a stunted woody vegetation, in which terrestrial vertebrates walked by.Despite the low predictive power of the multivariate analysis, due to the various sources of morphological variability inherent to footprint formation, the PK23 footprints seem to better correspond to Dinosauria or Avialae as the most likely producers, rather than to Lepidosauria or Crocodylia, discarding the dinosaur Chilesaurus due to very low interdigital mediolateral rotation capabilities.

Mitochondrial metagenomics reveal the independent colonization of the world’s coasts by intertidal oribatid mites (Acari, Oribatida, Ameronothroidea)

Oribatid mites are an ancient group that already roamed terrestrial ecosystems in the early and middle Devonian. The superfamily of Ameronothroidea, a supposedly monophyletic lineage, represents the only group of oribatid mites that has successfully invaded the marine coastal environment. By using mitogenome data and nucleic ribosomal RNA genes (18S, 5.8S, 28S), we show that Ameronothroidea are a paraphyletic assemblage and that the land-to-sea transition happened three times independently. Common ancestors of the tropical Fortuyniidae and Selenoribatidae were the first to colonize the coasts and molecular calibration of our phylogeny dates this event to a period in the Triassic and Jurassic era (225–146 mya), whereas present-day distribution indicates that this event might have happened early in this period during the Triassic, when the supercontinent Pangaea still existed. The cold temperate northern hemispheric Ameronothridae colonized the marine littoral later in the late Jurassic-Early Cretaceous and had an ancient distribution on Laurasian coasts. The third and final land-to-sea transition happened in the same geological period, but approx. 30 my later when ancestors of Podacaridae invaded coastal marine environments of the Gondwanan landmasses.

A theropod tooth from the Missão Velha Formation (Late Jurassic-Early Cretaceous) of the Araripe Basin: oldest Brazilian Abelisaurid record

ABSTRACT The Missão Velha Formation (Late Jurassic-Early Cretaceous), often referred to as Brejo Santo Formation, is one of the stratigraphic units of the Araripe Basin, included within the Vale do Cariri Group. This locality, characterised by its fluvio-estuarine paleoenvironment, yielded a diverse paleoichthyofauna while its terrestrial vertebrate record is still poorly known, with a single isolated theropod lateral tooth being briefly cited until now. This study aims to revisit this specimen (UERJ-PMB R008) in order to identify it through the current quantitative and qualitative methods. The quantitative analyses were unable to properly classify the Missão Velha specimen to a single theropod group, indicating paravian, piatnitzkysaurid and abelisaurid affinities, while most of cladistic analyses assigned the UERJ-PMB R008 as an abelisaurid tooth. The specimen was finally assigned as an abelisaurid lateral tooth due to its almost straight distal margin, hooked denticles, similarly sized mesial and distal denticles, a lanceolate cross section and an irregular enamel texture. This assignment represents not only the first definitive theropod record for Missão Velha Formation as it is also the oldest abelisaurid record in the South America, filling part of the 30-million-year gap between Eoabelisaurus and Spectrovenator.

Provenance and the U–Pb age constraints on the tuff beds of the Late Jurassic–Early Cretaceous Bazhenovo Formation, West Siberian Basin

AbstractThin tuff beds of the Late Jurassic–Early Cretaceous Bazhenovo Formation are laterally widespread in the central part of the West Siberian Basin (ca 0.5 million km2). However, the source of the tuff beds remains unclear. The stratigraphy, geochemistry and geochronology of the tuff beds were investigated to reveal their magmatic origin and potential source region. Most of the tuff beds are recorded in member 4 and can be correlated through the Bazhenovo sequence. Thin‐section petrography and X‐ray diffraction indicate that the tuffs mostly comprise clay minerals and K‐feldspars. Less common minerals are plagioclase, quartz and pyrite. The geochemical composition of the Bazhenovo tuff beds suggests a parental magma origin of andesite/basalt, which came from volcanic arc‐related settings. Considering the results of geochemical studies along with LA‐ICP‐MS zircon U–Pb dating (141.3 ± 0.3/2.8 Ma), the palaeovolcanoes of the Caucasus region or south‐east Mongolia–North‐East China are one of the potential source regions of the tuffs. The record of these tuffs indicates the intensive volcanic eruption during the Volgian–Ryazanian, accompanied by a very low‐sedimentation rate and preservation in a reducing environment. The tuff beds have broad implications as an isochronous marker horizon and constraints for the numerical age of the Jurassic–Cretaceous boundary in the Boreal Realm.

On the Rhodopean protoliths and their Middle Jurassic to Early Cretaceous evolution. A review

The Rhodope Massif represents a large high-grade metamorphic complex situated in the Balkan Peninsula, straddling the border between Bulgaria and Greece. Geological studies carried out during the last thirty years clearly established that the complex is composed of three major lithotectonic units characterized by differing protolith ages and Alpine thermotectonic evolution. The Rhodope Massif consists of Upper and Lower terranes representing continental fragments composed mainly of pre-Mesozoic magmatic rocks and covered by Early Mesozoic sedimentary sequences. These two entities are separated by an Intermediate Terrane comprising a Jurassic magmatic arc and its host rocks tectonically intercalated with Jurassic ophiolitic fragments together with the Early Mesozoic sediments. Detailed analyses of the previously published geochronological data revealed that the three main tectonic terranes were juxtaposed in the Late Jurassic–Early Cretaceous during the continental collision and northward subduction of the Lower and Intermediate terranes. These rocks experienced Middle Jurassic to Early Cretaceous high-pressure metamorphism, followed by high-temperature one accompanied by anatexis. At that time, the Upper Terrane was metamorphosed and deformed only partially. Being part of the European margin, this terrane represented an upper continental plate during the subduction, and therefore is not considered as a part of the Alpine Rhodope metamorphic complex. It is important to note that, although most of the present-day fabric and major tectonic zones in the Rhodope metamorphic complex are younger than Early Cretaceous, and therefore they postdate the geological evolution discussed in this study, they often reactivate the old boundaries between the main terranes and units.

Tectonostratigraphy of the Upper Jurassic-Lower Cretaceous siliciclastic (Shurijeh Formation) in the eastern Kopeh Dagh fold and thrust belt, Iran

During the Late Jurassic-Early Cretaceous, a significant gas-bearing siliciclastic succession was deposited in the Kopeh Dagh fold-thrust belt in northeastern Iran. Study of the regional evolution of depositional system and geodynamic setting of the red beds continental strata can help in a better understanding of the development of an intracontinental extension in this part of the Eurasia Plate. However, this evolution is driven by faulting events that are not fully understood. Facies analysis in wells and outcrops of the Upper Jurassic-Lower Cretaceous Mozduran and Shurijeh formations in the Saleh Abad area, the easternmost part of the Kopeh Dagh Basin, led to the identification of two fluvial braided river systems in the Shurijeh Formation. Provenance and sedimentological studies indicate that siliciclastic sediments were supplied from the south into the north during the Late Jurassic-Early Cretaceous in the Kopeh Dagh Basin. The higher compositional and textural maturity in the upper part of the Shurijeh Formation relative to the lower part indicate more recycling and more extensive transport of the sediments. Two stages of normal faulting can be identified based on the tectonostratigraphic evolution in this interval: The first phase was initiated with polymictic conglomerates during the Late Jurassic in the lower part of the Shurijeh Formation, while the basin-controlling fault was a buried structure. The second phase started with an influx of quartz conglomerates when the basin-controlling fault reached the surface in the middle part of the Shurijeh Formation. This study integrates new field observations and interpretations to enhance understanding of a complex history of multiphase deformation controlled facies patterns, structural geometries of the Late Jurassic-Early Cretaceous. Renewed Cretaceous extension generated accommodation space for the transgressive Shurijeh Formation.

From Triassic metamorphism to Early Cretaceous anatexis in the Dabie orogen, central China: Constraints from in-situ U-Pb age and Hf and O isotopes of zircon from migmatites

The Dabie orogen underwent a ‘complete’ orogenic cycle from Triassic collisional orogeny to Early Cretaceous tectonic collapse. Zircons of the migmatite in the North Dabie terrane recorded the processes from Triassic granulite-facies metamorphism to Early Cretaceous anatexis. Three types of zircon are recognized in the migmatite: the Neoproterozoic inherited magmatic zircon, the Triassic metamorphic zircon, and the Late Jurassic–Early Cretaceous anatectic zircon. The Neoproterozoic inherited magmatic zircons suggest the protolith of the migmatite has a tectonic affinity with the Yangtze Craton (YC). The Triassic metamorphic zircon domains have variable εHf(t) values from −4.1 to 3.6 and low δ18O compositions ranging from −4.36‰ to −0.30‰. The anatectic zircon domains have clearly negative εHf(t) values of −19.8 to 0.8 (mostly less than −10.0) and relatively high δ18O values from −4.24‰ to 3.49‰. Based on the chronological and isotopic data of migmatite and the results of previous studies, the Triassic granulite-facies metamorphism was closely related to the asthenosphere upwelling after the slab break-off during the orogenic stage, and the Early Cretaceous anatexis respond to widely heat event during the collapse stage of orogen.

Late Cretaceous Tectono-Metamorphic Events in the Skyros Upper Metamorphic Unit (Olympus Mountain), Aegean Sea, Greece

Late Cretaceous metamorphic events are known in Crete and the Cyclades from klippen above the External Hellenides. This work extends their occurrence to the North Aegean area within the tectonic units of the Internal Hellenides. New 40Ar/39Ar white mica ages from garnet-bearing micaschists of the Upper Metamorphic Unit of Skyros Island, cropping out in the Skyrian Olympus Mountain, document a Late Cretaceous tectono-metamorphic evolution. Several mica generations have been distinguished using electron probe microanalyses and were dated using the 40Ar/39Ar method: a relict mica older than 96 Ma, followed by a foliation-forming mica of about 88–84 Ma and alteration phases ≤ 68 Ma were recognized. This Cretaceous tectono-metamorphic evolution falls between the closure of the internal Axios/Vardar oceanic basin in the Late Jurassic–Early Cretaceous, and the closure of the external Pindos–Cyclades oceanic basin in the Early Cenozoic. The position of the Upper Metamorphic Unit of Skyros was probably within the evolving Hellenic volcanic/magmatic arc during the continuous subduction of the African plate beneath the European plate. The present tectonic position of the units bearing the Late Cretaceous metamorphic event is the result of the Cenozoic tectonic emplacement onto the more external units across the Hellenides from the Pelagonian to the Pindos–Cyclades domain.

High-resolution digital outcrop model of the faults, fractures, and stratigraphy of the Agardhfjellet Formation cap rock shales at Konusdalen West, central Spitsbergen

Abstract. Structure-from-motion (SfM) photogrammetry has become an important tool for the digitalisation of outcrops as digital outcrop models (DOMs). DOMs facilitate the mapping of stratigraphy and discontinuous structures like folds, faults, and fractures from the centimetre to kilometre scale. With pristine, treeless exposures, the outcropping strata in Svalbard, Arctic Norway, hold exceptional potential for analogue studies and are ideally suited for the acquisition of high-resolution DOMs. Here, we present the acquisition, processing, and integration of the Konusdalen West digital model data set, comprising both DOM and derived digital terrain model (DTM) data. Drone-based image acquisition took place over 2 weeks in July and August 2020. The Konusdalen West DOM and DTM cover a 0.12 km2 area and span a 170 m elevation difference. The DOM covers the upper two-thirds of the mudstone-dominated Late Jurassic–Early Cretaceous Agardhfjellet Formation. The Agardhfjellet Formation and its time equivalents are regional cap rocks for CO2 sequestration and petroleum accumulations on the Norwegian Continental Shelf. A total of 15 differential GNSS control points were used to georeference and quality assure the digital data assets, 5 of which function as reference checkpoints. SfM processing of 5512 acquired images resulted in high-confidence, centimetre-scale resolution point clouds, textured mesh (DOM), tiled model, orthomosaics, and a DTM. The confidence-filtered dense cloud features an average inter-point distance of 1.57 cm and has an average point density of 3824.9 points per metre. The five checkpoints feature root mean square errors of 2.0 cm in X, 1.3 cm in Y, 5.2 cm in Z, and 5.7 cm in XYZ. Increased confidences and densities are present along the western flank of the Konusdalen West outcrop, where a fault fracture network in mudstone-dominated strata is best exposed and photographed most extensively. Top and side view orthomosaics feature maximum resolutions of 8 mm per pixel, enabling the mapping of faults, formation members, marker beds, fractures, and other sub-centimetre features. Additional structural measurements and observations were taken in June 2021 to place the data in the geological context. Data described in this paper can be accessed at Norstore under https://doi.org/10.11582/2022.00027 (Betlem, 2022b).

Alkaline–Salicic Kurung Complex of the Ket-Kap–Yuna Igneous Province (Aldan Shield, Russia): Petrogenesis and Geodynamic Conditions of Formation

Abstract —Integrated geological data, petrogeochemical characteristics of magmatites of the Kurung complex (the Ket-Kap–Yuna igneous province of the Aldan Shield), and previously published isotopic data along with the results of geochronology and geochemistry research provide evidence for this complex evolving in the Late Cretaceous in a setting of riftogenesis (final phase) of continental margins. Similar to the Late Jurassic–Early Cretaceous polyformational volcano-plutonism of the Aldan Shield, the Late Cretaceous alkaline magmatism in the Ket-Kap–Yuna province is associated with the tectonomagmatic activation which manifested itself mainly as continental margin rifting associated with deep reorganization of the southwestern, southern and southeastern framing of the Siberian craton triggered by gravitational sliding of the lithospheric plates. Results of the petrogeochemical analysis of the studied magmatites revealed that the heterogeneous rock groups identified within this rock complex are not related to each other by fractional or other type of differentiation, thus suggesting their possible derivation as a result of fluid syntexis-type interaction between mantle-derived alkali–basite melt and felsic crustal melts. Alkali–basite parent melts are shown to have formed during partial melting of variably enriched mantle which is widely spread beneath the Aldan Shield and is varied in composition (from BSE enriched to nearly EM-I). Origination of such deep-seated melts (magma sources) was associated with the rifting processes (strike-slip tectonics) triggered by the setting of gravitational sliding of lithospheric plates. The formation of alkaline–salic magmas of the Kurung complex is associated with large-scale selective assimilation of crustal material by high-temperature fluidized mantle magmas during their ascent to the surface, possibly as a result of fluid syntexis of alkaline–basite mantle magmas and crustal smeltings formed under their influence.

Comment on ‘The Generation of Eocene Mafic Dike Swarms During the Exhumation of a Core Complex, Biarjmand Area, NE Iran’ by Azizi et al. (2023), Journal of Petrology, 64, 1–18

Abstract Azizi, H., Daneshvar, N., Asahara, Y., Minami, M. & Anma, R. (2023). The generation of Eocene mafic dike swarms during the exhumation of a Core complex, Biarjmand area, NE Iran. Journal of Petrology64, 1–18 have attributed the E–W-oriented mafic dike swarm in the Biarjmand metamorphic core complex to an Eocene extensional event which is much younger than a previously suggested Late Jurassic–Early Cretaceous age. They proposed that the emplacement of these dikes occurred in a rapid extensional regime coeval with the exhumation of the core complex after gravitational instability in the Central Iran/Eurasia collision zone. I appreciate the opportunity this article provides to shed light on specific aspects of the Late Mesozoic–Early Cenozoic continental extension within the Eurasian sector of the Neotethys subduction system. However, I here bring to attention certain discrepancies within Azizi et al.'s publication. Specifically, the assignment of an Eocene age to the emplacement of the E–W-oriented dike swarm, even though purportedly supported by U–Pb zircon dating, appears to be at odds with field observations and previously published geochronological data. Furthermore, the article contains internal contradictions in its presentation of the core complex model for the study area. It is important to note that Malekpour-Alamdari, A., Axen, G. J., Heizler, M. T. & Hassanzadeh, J. (2017). Large-magnitude continental extension in the northeastern Iranian plateau: insight from K-feldspar 40Ar/39Ar thermochronology from the Shotor Kuh-Biarjmand metamorphic core complex. Geosphere13, 1207–1233 previously documented the geochronological-based metamorphic core complex model of the area. Regrettably, despite its direct relevance, these earlier works have not been acknowledged in Azizi et al.'s paper. In this comment, I outline the problems with the structural and regional geology, the zircon U–Pb age of the dike samples, the age of the dike swarm, and the geodynamic interpretations in Azizi et al.'s work.

Late Mesozoic Exhumation of the Huangling Massif: Constraints on the Evolution of the Middle Yangtze River

AbstractPlate subduction leads to complex exhumation processes on continents. The Huangling Massif lies at the northern margin of the South China Block. Whether the Huangling Massif was exhumed as a watershed of the middle reaches of the Paleo‐Yangtze River during the Mesozoic remains under debate. We examined the exhumation history of the Huangling Massif based on six granite bedrock samples, using apatite fission track (AFT) and apatite and zircon (U‐Th)/He (AHe and ZHe) thermochronology. These samples yielded ages of 157–132 Ma (ZHe), 119–106 Ma (AFT), and 114–72 Ma (AHe), respectively. Thermal modeling revealed that three phases of rapid cooling occurred during the Late Jurassic–Early Cretaceous, late Early Cretaceous, and Late Cretaceous. These exhumation processes led to the high topographic relief responsible for the emergence of the Huangling Massif. The integrated of our new data with published sedimentological records suggests that the Huangling Massif might have been the watershed of the middle reaches of the Paleo‐Yangtze River since the Cretaceous. At that time, the rivers flowed westward into the Sichuan Basin and eastward into the Jianghan Basin. The subduction of the Pacific Plate beneath the Asian continent in the Mesozoic deeply influenced the geomorphic evolution of the South China Block.

Ikaite versus seep-related carbonate precipitation in the Late Jurassic–Early Cretaceous of West Spitsbergen: evidence for cold versus warm climates?

Ikaite versus seep-related carbonate precipitation in the Late Jurassic–Early Cretaceous of West Spitsbergen: evidence for cold versus warm climates?

Groundwater Exploration in Carbonate Reservoirs Using Borehole Investigations: A Case Study from South Dobrogea, Romania

The Late Jurassic–Early Cretaceous (J3–K1) transboundary aquifer is the most important groundwater body in southern–southeastern Romania, shared with Bulgaria and hosted in karstic–fractured carbonates. We conducted an integrated evaluation of this aquifer by analyzing three 700 m deep groundwater exploration–exploitation boreholes, which intercepted it in the Cernavodă area (South Dobrogea region). The evaluation was based on geophysical wireline logging, drilling information, and borehole production tests. A K-means clustering of the logging data was performed for lithology typing, formation boundaries identification, and the delineation of probable producing intervals associated with secondary porosity development. Petrophysical interpretation was carried out via depth-constrained (zonal) inversion, using multimineral models, the estimated formation boundaries, and variable uncertainties for the main input logs. The optimal interpretation models were correlated with borehole testing results to gain insight into the hydrogeological properties of the aquifer complex. The fractured–vuggy interval with the highest water-producing potential was identified in the lower section of the J3-age Rasova Formation (639–700 m depth), comprising mainly undolomitized limestones. A southeast-to-northwest trend of increasing productivity of the boreholes, correlated with an increasing lateral dolomitization intensity within the Rasova Formation, suggests a highly heterogeneous character of the aquifer. The differences in productivity are due not only to local porosity variations but also to various degrees of pore space connectivity that are related to the amount of fracturing or karstification. The novel findings of this study have important practical implications for the optimal placement, design, and drilling program of future groundwater exploitation boreholes in the Cernavodă area and neighboring sectors.

Paleotectonic Stress and Present Geostress Fields and Their Implications for Coalbed Methane Exploitation: A Case Study from Dahebian Block, Liupanshui Coalfield, Guizhou, China

The macroscopic structural fractures (joints) and geostress distribution characteristics of coal reservoirs are important factors affecting the exploitation of coalbed methane (CBM). In this study, the joints in the sedimentary strata of the Dahebian block in Liupanshui area, Guizhou Province were investigated. Directional coal samples were collected for observation and statistical analysis of coal microfractures, the paleotectonic stress fields of the study area were reconstructed, and the tectonic evolution was elucidated. The geostress distribution characteristics of the target coal seam (coal seam No. 11, P3l) in the study area were analyzed using the finite element numerical simulation method. The results indicate that the structural evolution of the Dahebian syncline in the study area can be divided into two stages. The Late Jurassic–Early Cretaceous stage (Early Yanshanian) is the first stage. Affected by the sinistral strike slip of the Weining–Ziyun–Luodian (WZL) fault zone, the derived stress field in the study area exhibits maximum principal stress (σ1) in the NEE–SWW direction. The Late Cretaceous stage (Late Yanshanian) is the second stage. Affected by the dextral strike slip of the WZL fault zone, the derived stress field exhibits σ1 in the NNW–SSE direction. The folds and faults formed in the first stage were modified by the structural deformation in the second stage. The dominant strikes of joints in the sedimentary strata are found to be in the NW–NNW (300°–360°) and NE (30°–60°) directions, with dip angles mostly ranging from 60° to 90°. The dominant strikes of coal microfractures are in the NW (285°–304°) and NE (43°–53°) directions. The distribution of geostress in the study area is characterized by high levels of geostress in the syncline center, decreasing towards the surrounding periphery. The overall trend of the geostress contour line is similar to the shape of the syncline and is influenced by folds and faults. The σ1 of coal seam No. 11 is vertical stress. The prediction results show that the joint density of coal seam No. 11 in the block is 36–50 joints/m, and the shape of the joint density contour line is also affected by the axial direction of the Dahebian syncline and the surrounding faults. The variation in coal seam joint density and the control effect of geostress on joints opening or closing affects the permeability of coal reservoirs. The study results provide significant guidance for the exploitation of CBM.

Geochronological results from the Zhela Formation volcanics of the Tethyan Himalaya and their implications for the breakup of eastern Gondwana

The relationship between the Kerguelen mantle plume and the breakup of eastern Gondwana is still debated. The new Zircon SHRIMP U–Pb dating of 139.9 ± 4.6 Ma, as well as previous ages from the Zhela Formation volcanic rocks in the Tethyan Himalaya, show that the studied Zhela Formation volcanic rocks formed during the Late Jurassic-Early Cretaceous, rather than the Middle Jurassic. The calculated volume of the Comei-Bunbury igneous rocks is ~ 114,250 km3, which is compatible with the large igneous provinces and, consequently, the typical mantle plume models. The new date results, along with existing dates, show that the volcanism attributed to the Kerguelen mantle plume in the Tethyan Himalaya ranges from ca.147 Ma to ca.124 Ma, with two peaks at approximately 141 Ma and 133 Ma. This new finding, together with geochemical and palaeomagnetic data obtained from the Comei-Bunbury igneous rocks, indicate that the Kerguelen mantle plume contributed significantly to the breakup of eastern Gondwana and that eastern Gondwana first disintegrated and dispersed at ca.147 Ma, the Indian plate separated completely from the eastern Gondwana before ca.125 Ma.