Laser Optoacoustic Imaging System Research Articles

Melanin nanoparticles as a novel contrast agent for optoacoustic tomography

We describe the synthesis and characterization of melanin-like nanoparticles (MNP) as novel contrast agents for optoacoustic tomography. Good dispersion stability of high concentration MNPs in different biological media was achieved with thiol-terminated methoxy-poly(ethylene glycol), which can be used for further functional conjugation. MNP-PEG were found biocompatible with human MCF-7 and 3T3 cells. Cell toxicity of MNPs was found lower than that of gold nanorods for concentrations that provide equal optical absorbance. Optoacoustic tomography images were obtained with Laser Optoacoustic Imaging System (LOIS-3D) from tubes filled with contrast agents and live mice. Imaging of tubes permitted verification of the system resolution <300μm and sensitivity Δμa=0.03/cm under safe laser fluence of 20mJ/cm2. Water suspensions of MNP demonstrated optoacoustic efficiency that is about equal to that of gold nanorods under conditions of equal optical absorption. We conclude that MNPs have the potential for biomedical imaging applications as optoacoustic contrast agents.

Interferometric fiber optic sensors for biomedical applications of optoacoustic imaging

We present a non-metallic interferometric silica optical fiber ultrasonic wideband sensor for optoacoustic imaging applications. The ultrasonic sensitivity of this sensor has been characterized over the frequency range from 1 to 10 MHz. A comparative analysis has been carried out between this sensor and an array of piezoelectric transducers using optoacoustic signals generated from an optical absorbent embedded in a tissue mimicking phantom. Also, a two dimensional reconstructed image of the phantom using the fiber interferometric sensor is presented and compared to the image obtained using the Laser Optoacoustic Imaging System, LOIS-64B. The feasibility of our fiber optic based sensor for wideband ultrasonic detection is demonstrated.

Real-time optoacoustic monitoring and three-dimensional mapping of a human arm vasculature

We present our findings from a real-time laser optoacoustic imaging system (LOIS). The system utilizes a Q-switched Nd:YAG laser; a standard 128-channel ultrasonic linear array probe; custom electronics and custom software to collect, process, and display optoacoustic (OA) images at 10 Hz. We propose that this system be used during preoperative mapping of forearm vessels for hemodialysis treatment. To demonstrate the real-time imaging capabilities of the system, we show OA images of forearm vessels in a volunteer and compare our results to ultrasound images of the same region. Our OA images show blood vessels in high contrast. Manipulations with the probe enable us to locate and track arteries and veins of a forearm in real time. We also demonstrate the ability to combine a series of OA image slices into a volume for spatial representation of the vascular network. Finally, we use frame-by-frame analysis of the recorded OA video to measure dynamic changes of the crossection of the ulnar artery.

Optoacoustic imaging using fiber-optic interferometric sensors

An interferometric sensor based on nonmetallic silica optical fiber is presented as an ultrasonic wideband transducer for optoacoustic imaging applications. We have characterized the sensitivity of the optical fiber sensor by detecting optoacoustic signals from an optically absorbing object embedded in a tissue-mimicking phantom and have compared the signals recorded with those detected from the same phantom using an array of piezoelectric transducers. The optical fiber sensor was also scanned along the phantom surface in order to reconstruct two-dimensional optoacoustic images of the phantom. These images have been compared with images obtained using the Laser Optoacoustic Imaging System, LOIS-64B, demonstrating the feasibility of our fiber-optic sensor as a wideband ultrasonic transducer.

Laser optoacoustic imaging system for detection of breast cancer

We designed, fabricated and tested the laser optoacoustic imaging system for breast cancer detection (LOIS-64), which fuses optical and acoustic imaging techniques in one modality by utilizing pulsed optical illumination and ultrawide-band ultrasonic detection of resulting optoacoustic (OA) signals. The system was designed to image a single breast slice in craniocaudal or mediolateral projection with an arc-shaped array of 64 ultrawide-band acoustic transducers. The system resolution on breast phantoms was at least 0.5 mm. The single-channel sensitivity of 1.66 mVPa was estimated to be sufficient for single-pulse imaging of 6 to 11 mm tumors through the whole imaging slice of the breast. The implemented signal processing using the wavelet transform allowed significant reduction of the low-frequency (LF) acoustic noise, allowed localization of the optoacoustic signals from tumors, and enhanced the contrast and sharpened the boundaries of the optoacoustic images of the tumors. During the preliminary clinical studies on 27 patients, the LOIS-64 was able to visualize 18 out of 20 malignant lesions suspected from mammography and ultrasound images and confirmed by the biopsy performed after the optoacoustic tomography (OAT) procedure.

High Sensitivity of In Vivo Detection of Gold Nanorods Using a Laser Optoacoustic Imaging System

The development of a contrast agent for a laser optoacoustic imaging system (LOIS) can significantly widen preclinical and clinical applications of this imaging modality for early detection of cancerous tumors. Gold nanorods were engineered to enhance the contrast for optoacoustic imaging. Under in vivo conditions, 25 microL of gold nanorods solution at a concentration of 1.25 pM were injected into nude mice and detected using a single-channel acoustic transducer. LOIS was used to visualize the distribution of gold nanoparticles at a concentration of 125 pM in vivo when 100 microL of solution of gold nanoparticles was delivered subcutaneously. Our results suggest that LOIS can be used for in vivo detection of gold nanorods at low concentrations and the nanoparticles can be engineered to enhance the diagnostic power of optoacoustic imaging.