Large Bony Defects Research Articles

Healthy and diabetic primary human osteoblasts exhibit varying phenotypic profiles in high and low glucose environments on 3D-printed titanium surfaces.

The revolution of orthopedic implant manufacturing is being driven by 3D printing of titanium implants for large bony defects such as those caused by diabetic Charcot arthropathy. Unlike traditional subtractive manufacturing of orthopedic implants, 3D printing fuses titanium powder layer-by-layer, creating a unique surface roughness that could potentially enhance osseointegration. However, the metabolic impairments caused by diabetes, including negative alterations of bone metabolism, can lead to nonunion and decreased osseointegration with traditionally manufactured orthopedic implants. This study aimed to characterize the response of both healthy and diabetic primary human osteoblasts cultured on a medical-grade 3D-printed titanium surface under high and low glucose conditions. Bone samples were obtained from six patients, three with Type 2 Diabetes Mellitus and three without. Primary osteoblasts were isolated and cultured on 3D-printed titanium discs in high (4.5 g/L D-glucose) and low glucose (1 g/L D-Glucose) media. Cellular morphology, matrix deposition, and mineralization were assessed using scanning electron microscopy and alizarin red staining. Alkaline phosphatase activity and L-lactate concentration was measured in vitro to assess functional osteoblastic activity and cellular metabolism. Osteogenic gene expression of BGLAP, COL1A1, and BMP7 was analyzed using reverse-transcription quantitative polymerase chain reaction. Diabetic osteoblasts were nonresponsive to variations in glucose levels compared to their healthy counterparts. Alkaline phosphatase activity, L-lactate production, mineral deposition, and osteogenic gene expression remained unchanged in diabetic osteoblasts under both glucose conditions. In contrast, healthy osteoblasts exhibited enhanced functional responsiveness in a high glucose environment and showed a significant increase in osteogenic gene expression of BGLAP, COL1A1, and BMP7 (p<.05). Our findings suggest that diabetic osteoblasts exhibit impaired responsiveness to variations in glucose concentrations, emphasizing potential osteoblast dysfunction in diabetes. This could have implications for post-surgery glucose management strategies in patients with diabetes. Despite the potential benefits of 3D printing for orthopedic implants, particularly for diabetic Charcot collapse, our results call for further research to optimize these interventions for improved patient outcomes.

IMPACTION BONE GRAFTING OF LARGE DEFECTS IN ANKLE AND HINDFOOT FUSIONS

BackgroundAnkle and hindfoot fusion in the presence of large bony defects represents a challenging problem. Treatment options include acute shortening and fusion or void filling with metal cages or structural allograft, which both have historically low union rates. Impaction grafting is an alternative option.MethodsA 2 centre retrospective review of consecutive series of 32 patients undergoing hindfoot fusions with impaction bone grafting of morselised femoral head allograft to fill large bony void defects was performed. Union was assessed clinically and with either plain radiography or weightbearing CT scanning. Indications included failed total ankle replacement (24 patients), talar osteonecrosis (6 patients) and fracture non-union (2 patients). Mean depth of the defect was 29 ±10.7 mm and mean maximal cross-sectional area was 15.9 ±5.8 cm2. Tibiotalocalcaneal (TTC) arthrodesis was performed in 24 patients, ankle arthrodesis in 7 patients and triple arthrodesis in 1 patient.ResultsMean age was 57 years (19–76 years). Mean follow-up of 22.8 ±8.3 months. 22% were smokers. There were 4 tibiotalar non-unions (12.5%), two of which were symptomatic. 10 TTC arthrodesis patients united at the tibiotalar joint but not at the subtalar joint (31.3%), but only two of these were symptomatic. The combined symptomatic non-union rate was 12.5%. Mean time to union was 9.6 ±5.9 months. One subtalar non-union patient underwent re-operation at 78 months post-operatively after failure of metalwork. Two (13%) patients developed a stress fracture above the metalwork that healed with non-operative measures. There was no bone graft collapse with all patients maintaining bone length.ConclusionImpaction of morselised femoral head allograft can be used to fill large bony voids around the ankle and hindfoot when undertaking arthrodesis, with rapid graft incorporation and no graft collapse despite early loading. This technique offers satisfactory union outcomes without the need for shortening or synthetic cages.

Versatility of the medial corticoperiosteal flap: from recalcitrant non-unions up to large bony defects.

Reconstructive microsurgery techniques using vascularized bone grafts have revolutionized the treatment of complex cases associated with recalcitrant non-unions or osteomyelitis. The medial femoral corticoperiosteal flap (MFCP flap) has emerged as a valuable option in bone reconstruction. Its clinical applications have been extended over the years considering this flap from non-unions with minimal bone lost, up to large intercalary defects of the upper and lower extremities. This article aims to present the clinical applications and outcomes of the MFCP flap in various reconstructive scenarios. Seventy-nine patients with persistent non-union and bone defects of the upper and lower limb were evaluated from June 2008 to October 2020. All of them were reconstructed with a corticoperiosteal flap from the medial femoral condyle in our hospital. Previous procedures, bone gap and type of flap used were recorded. Postoperative functional status was assessed with time of bone healing, complications and clinical final outcome. Radiological evidence of bone union was observed at 4.09months (range 2-9). Healing rate was 97% with periosteal corticocancellous flaps (PCC flaps) and 93% with corticoperiosteal flaps (CP flaps). Average follow-up was 14.5months (range 5-28). There were no significant donor site complications. The MFCP flap offers a versatile and reliable option for bone reconstruction. Its ability to provide vascularized bone tissue with low morbidity enhances the healing process and improves outcomes. The MFCP flap has been increasing its applications and it serves as a valuable option in the treatment of recalcitrant non-unions or bony defects irrespective of site and size up to 5cm in the upper and lower extremities.

The use of vascularized fibula flap with allograft in post-oncologic microsurgical bone reconstruction of lower limbs in pediatric patients.

Post-oncologic surgical reconstruction of lower limbs in pediatrics remains a challenging topic. Microsurgical techniques allow reconstructions of large bony defects. The use of vascularized fibular flap with allograft has proven to be an ideal biologic construct. We aim to assess the success rate of this operation, including flap survival, bony union, weight-bearing ambulation, and complications in a long-term follow-up in our case series compared to the literature. Our case-series includes 18 femoral resections (9 osteosarcomas, 8 Ewing sarcoma, and 1 desmoid tumor) and 15 tibial resections (10 osteosarcoma, 4 Ewing sarcoma, and 1 Malignant Fibrous Histiocytoma). We collected patients' demographics, type of tumor, type of resection, defect size, fibula-flap length, method of fixation, anastomosis site, follow-up data, complications, and their management. All survivals were examined by X-ray and CT-scan to evaluate the morphological changes of the vascularized fibula and follow-up. The functional evaluation was performed by the 30-point Musculoskeletal Tumor Society Rating Score (MSTS) for the lower limb (Enneking et al., Clinical Orthopaedics and Related Research 1993(286):241-246). The mean age of the femur resection patients' group was 11.2 years with a mean defect size of 14 cm and a mean length of the fibular flap of 18 cm; for the tibia the mean age was 12 years with a mean defect size of 14 cm and a mean length of the fibular flap of 16.6 cm. The overall survival of the reconstructions at 5 years follow-up was 17 out 18 cases for the femur and 13 out of 15 cases for the tibia. MSTS score was 28.2 for the femur and 23.7 for the tibia. The average time of union of the fibula was seen after 5 months, while allograft consolidation was observed around 19.7 months. The mean time of follow-up was 144.5 months for the femur and 139.2 months for the tibia. The complication rate observed was 7 out of 18 for the femur and 7 out of 15 for the tibia reconstructions. The viability of the fibula is a cornerstone in the success of reconstruction as well as the successful management of complications in intercalary defects after tumor resection in pediatrics to restore good functionality. Our results are in line with those reported in the literature in terms of overall complication rates. The high primary union of allograft, the high MSTS score obtained, and the low rate of severe complications reflect the mechanical role of this reconstructive technique over a long follow-up.

Fusion Rates in Tibiotalocalcaneal Arthrodesis with Tantalum Coated Metal Cup Augmentation

Introduction/Purpose: Tantalum coated metal spacers (TCMS) have recently been utilized to fill and provide structure to large bony defects in the hindfoot. Tantalum is an appealing material due to its biocompatibility, lack of immune response generation, and structural integrity. Compared to custom printed spacers and bulk allografts, TCMS are readily available off-the-shelf implants with significantly less cost. There is currently a paucity of literature assessing the use and outcomes of TCMS in foot and ankle surgery, specifically in tibiotalocalcaneal (TTC) arthrodesis. This study serves to assess clinical outcomes and fusion rates of patients who underwent TTC arthrodesis utilizing intramedullary nailing with TCMS augmentation for large bony defects. Methods: We retrospectively identified all patients &gt; 18 years of age who underwent TTC arthrodesis with TCMS augmentation at our tertiary care center between 2015-2021. We also identified all patients who underwent TTC arthrodesis without augmentation within that time frame. The computed tomography (CT) scans at the six-month postoperative point were reviewed by one board-certified orthopaedic foot and ankle surgeon to determine fusion status, which was defined as having at least 50% fusion mass. Patient-reported outcomes measures (PROMs) including the modified foot function index (FFI) and PROMIS Global Mental Health Score were collected for patients in both groups. Patient demographics, clinical outcomes, and PROMs were compared between groups. A multivariate logistic regression model measured the effect of TCMS augmentation on the likelihood of achieving fusion. Results: Of the 65 patients included, 21 patients (32.3%) underwent TTC with TCMS augmentation. There were no significant differences in demographics between the two groups. Patients in the TCMS group had significantly higher modified FFI (91.1 + 47.6 vs 26.3 + 48.8, p&lt; 0.001) and PROMIS Global Mental Health (12.2 + 4.82 vs. 5.59 + 6.76, p&lt; 0.001) scores in the postoperative period. Overall, the fusion rate was higher for the TCMS group, however the difference was not significant between groups (90.5% vs. 80.5%, p=0.472). Multivariate logistic regression identified that TCMS augmentation was a nonsignificant predictor of increased odds of fusion at the six-month postoperative point (OR=2.87, p=0.232). Conclusion: This study is the largest to date to present 6-month postoperative CT scans demonstrating successful TTC fusion with TCMS augmentation, contributing to our understanding of its utility. Given the severity of disease and bone loss in the TCMS group, it is not surprising that post-operative patient reported outcome scores differed significantly compared to the control group. TCMS augmentation can be utilized as cost effective spacers to fill large defects in TTC arthrodesis with successful union rates. Further studies are needed to evaluate the efficacy of TCMS augmented fusions as a viable substitute to custom printed cages. Figure 1: Weight-bearing anteroposterior and lateral ankle radiographs of a patient with post-traumatic ankle arthritis and previously treated chronic osteomyelitis with valgus malalignment (A). Anteroposterior and lateral ankle radiographs status post TCMS augmented TTC arthrodesis (B). Coronal and sagittal CT scans demonstrating bony union through the TCMS augment (C).

Cranioplasty is not required in the reconstruction of small combined scalp and calvarial defects

BackgroundTreatment of scalp malignancies may include the need for craniectomy. The decision to perform cranioplasty is not straightforward and is frequently subjective. The purpose of this study was to assess the clinical outcomes after reconstruction of complex scalp and calvarial defects by comparing patients with and without cranioplasty. MethodsRetrospective review of the clinical records of a consecutive series of patients who underwent scalp soft tissue reconstruction after craniectomy for malignancy or osteoradionecrosis between 2014 and 2022 at Royal Melbourne Hospital was conducted. Demographics, previous treatments, surgical details, and post-operative complications were assessed. Traumatic injuries and decompressive craniectomies were excluded. Minimum follow-up of 6 months. ResultsThirty-seven patients were included in the study. Indications for surgery included skin malignancies, osteoradionecrosis, or both. There was one reconstructive failure (in the non-cranioplasty group). Infection and metalware exposure were common complications in patients who underwent cranioplasty (38.5%). No patient developed neurological symptoms subsequent to craniectomy. One patient needed revision surgery due to esthetic reasons (cranioplasty group). Transposition flaps were associated with more complications and revision procedures. ConclusionCombined scalp and calvarial defects pose a difficult reconstructive challenge. Stable soft tissue coverage is more reliably achieved with free flap reconstruction. Cranioplasty is not always mandatory and should be reserved for cases with a very large bony defect or when the defect is located in a cosmetically sensitive area.

Fusion Rates in Tibiotalocalcaneal Arthrodesis with Tantalum Coated Metal Cup Augmentation

Category: Ankle Arthritis; Ankle Introduction/Purpose: Tantalum coated metal spacers (TCMS) have recently been utilized to fill and provide structure to large bony defects in the hindfoot. TCMS have a porous structure and elastic modulus similar to cancellous bone, increasing resistance to collapse, as well as osteoconductive properties that allow for bony ingrowth. At this time, there is still a paucity of literature assessing the use and outcomes of TCMS in foot and ankle surgery, more specifically as bridging structures for large bony defects when performing tibiotalocalcaneal (TTC) arthrodesis. This study serves to assess clinical outcomes and fusion rates of patients who underwent TTC arthrodesis utilizing intramedullary nailing with tantalum coated metal cup augmentation for large bony defects. Methods: We retrospectively reviewed the charts of 20 patients who underwent TTC fusion with TCMS augmentation at our local tertiary care center between 2015-2021. The CT scans at the six-month post-operative window were reviewed by one orthopaedic surgeon to determine the presence of bony fusion, which was defined as having at least 50% fusion mass. From the initial cohort, we collected the following modified foot function index scores for 13 patients: PROMIS Physical Health (0-20), PROMIS Mental health (0-20), Foot Function Index (0-170), Activity Limitation Scale (0-30), Pain Scale (0-50) and Disability Scale (0-90). Results: The mean age of our cohort was 53.9 (± 12.9) with a mean CCI of 1.54 (± 1.127) and mean follow up of 451.5 days (± 353.3). Mean modified foot function index scores included: PROMIS Physical Health 12.15 (± 3.34), PROMIS Mental health 12.23 (± 4.82), Foot Function Index 91.08 (± 47.59), Activity Limitation Scale 15.00 (± 10.42), Pain Scale 25.00 (± 14.77) and Disability Scale 51.00 (± 25.06). The post-operative complication rate was 30.8% in which 3 patients required a revision surgery via nail dynamization and one patient required a below knee amputation due to an infected nonunion of the TTC arthrodesis. The overall fusion rate at the 6-month postoperative visit was 69.2%. Conclusion: Unlike prior studies, we were able to obtain 6-month post-operative CT scans to delineate successful fusions with a larger number of patients (n=13). Given the paucity of literature looking at TCMS augmented fusions in foot and ankle surgery, our data will contribute to our understanding and efficaciousness of this relatively new use of TCMS in foot and ankle surgery. Further studies are needed to evaluate the efficacy of TCMS augmented fusions as a viable surgical approach as well an alternative to standard nail dynamizations with structural grafts.

Physiomimetic biocompatibility evaluation of directly printed degradable porous iron implants using various cell types.

Additively manufactured (AM) degradable porous metallic biomaterials offer unique opportunities for satisfying the design requirements of an ideal bone substitute. Among the currently available biodegradable metals, iron has the highest elastic modulus, meaning that it would benefit the most from porous design. Given the successful preclinical applications of such biomaterials for the treatment of cardiovascular diseases, the moderate compatibility of AM porous iron with osteoblast-like cells, reported in earlier studies, has been surprising. This may be because, as opposed to static in vitro conditions, the biodegradation products of iron in vivo are transported away and excreted. To better mimic the in situ situations of biodegradable biomaterials after implantation, we compared the biodegradation behavior and cytocompatibility of AM porous iron under static conditions to the conditions with dynamic in situ-like fluid flow perfusion in a bioreactor. Furthermore, the compatibility of these scaffolds with four different cell types was evaluated to better understand the implications of these implants for the complex process of natural wound healing. These included endothelial cells, L929 fibroblasts, RAW264.7 macrophage-like cells, and osteoblastic MG-63 cells. The biodegradation rate of the scaffolds was significantly increased in the perfusion bioreactor as compared to static immersion. Under either condition, the compatibility with L929 cells was the best. Moreover, the compatibility with all the cell types was much enhanced under physiomimetic dynamic flow conditions as compared to static biodegradation. Our study highlights the importance of physiomimetic culture conditions and cell type selection when evaluating the cytocompatibility of degradable biomaterials in vitro. STATEMENT OF SIGNIFICANCE: Additively manufactured (AM) degradable porous metals offer unique opportunities for the treatment of large bony defects. Despite the successful preclinical applications of biodegradable iron in the cardiovascular field, the moderate compatibility of AM porous iron with osteoblast-like cells was reported. To better mimic the in vivo condition, we compared the biodegradation behavior and cytocompatibility of AM porous iron under static condition to dynamic perfusion. Furthermore, the compatibility of these scaffolds with various cell types was evaluated to better simulate the process of natural wound healing. Our study suggests that AM porous iron holds great promise for orthopedic applications, while also highlighting the importance of physio-mimetic culture conditions and cell type selection when evaluating the cytocompatibility of degradable biomaterials in vitro.

Predictors of Outcomes in 900 Alveolar Bone Grafts.

Significant discrepancies exist in the reported variables influencing alveolar bone graft outcomes. The purpose of this study was to evaluate graft success and identify outcome predictors in a large patient cohort using an objective cone beam computed tomography assessment tool. Consecutive patients with cleft lip/palate who underwent alveolar bone grafting by 1 surgeon were included. Predictor variables were age at graft, oronasal fistula, canine position, concurrent premaxillary osteotomy, size of cleft, presence of bony palatal bridge, history of failed graft, location of primary repair, and surgeon experience. The outcome variable was graft success, determined using a cone beam computed tomography assessment tool and defined as a score of 3 or 4 (out of 4) in the following domains: vertical bone level, labiopalatal thickness, and nasal piriform symmetry. The sample included 900 alveolar cleft sites (median graft age, 9.9 years). The success rate was 94.6%. Presence of an erupted canine, large cleft defect, or premaxillary osteotomy were independent predictors of graft failure; presence of a bony palatal bridge was associated with graft success ( P < 0.05). Presence of an erupted canine, large bony defect, or premaxillary osteotomy increase the risk of failure, and a bony palatal bridge portends success. Age 12 years or older, visible oronasal fistula, history of failed graft, primary cleft repaired at outside institution, and surgeon experience were associated with higher graft failure, but were not independent predictors when controlling for covariates. Surgeons should be aware that these factors in combination increase the odds of graft failure. Risk, III.

Proximal Femur Replacements for an Oncologic Indication Offer a Durable Endoprosthetic Reconstruction Option: A 40-year Experience.

Proximal femur replacements (PFRs) are an effective surgical option to treat primary and metastatic tumors causing large bony defects in the proximal femur. Given the relative rarity of these indications, current studies on PFR for oncologic indications are generally limited by patient volume or relatively short-term follow-up. Because recent advances in systemic therapy have improved the prognosis of patients who undergo limb salvage surgery for musculoskeletal tumors, data on the long-term durability of endoprosthetic reconstructions have become increasingly important. (1) How does the long-term survival of cemented bipolar PFRs compare with patient survival in patients who underwent PFR for benign, aggressive, and metastatic tumors? (2) What are common reasons for revisions of primary PFRs? (3) Which factors are associated with survival of primary PFRs? (4) What is the survivorship free from conversion of bipolar PFRs to THA? Between January 1, 1980, and December 31, 2020, we treated 812 patients with an endoprosthetic reconstruction for an oncologic indication. All patients who underwent a primary PFR for an oncologic indication were included in this study. The study cohort consisted of 122 patients receiving a primary PFR. Eighteen patients did not reach a censored endpoint such as death, revision, or amputation within 2 years. Thirty-three patients died within 2 years of their surgery. Of the 122 patients with primary PFRs, 39 did not reach a censored endpoint and have not been seen within the past 5 years. However, the mean follow-up time for these patients was longer than 10 years. The Social Security Death Index was queried to identify any patients who may have died but might not have been captured by our database To allow for adequate follow-up, endoprosthetic reconstructions performed after December 31, 2020 were excluded. The mean age at the time of the index surgery was 48 ± 22 years. The mean follow-up time of surviving patients was 7 ± 8 years. All PFRs were performed using a bipolar hemiarthroplasty with a cemented stem, and all implants were considered comparable. Demographic, oncologic, procedural, and outcome data including prosthesis survival, patient survival, complication rates, and rates of conversion to THA were analyzed. Patient, prosthesis, and limb salvage survival rates were generated, with implant revision as the endpoint and death as a competing risk. Statistical significance was defined as p < 0.05. Generally, patients with benign or low-grade (Stage I) disease outlived their implants (100% patient survival through 30 years; p = 0.02), whereas the opposite was true in patients with high-grade, localized Stage II disease (64% patient survival at 5 years [95% CI 49% to 76%]; p = 0.001) or widespread Stage III metastatic disease (6.2% patient survival at 5 years [95% CI 0.5% to 24%]; p < 0.001). Primary PFR implant survival at 5, 10, 20, and 30 years was 97% (95% CI 90% to 99%), 81% (95% CI 67% to 90%), 69% (95% CI 46% to 84%), and 51% (95% CI 24% to 73%), respectively. Eight percent (10 of 122) of primary PFRs were revised for any reason. The most common causes of revision were aseptic loosening (3% [four of 122]), infection (3% [three of 122]), breakage of the implant (2% [two of 122]), and tumor progression (1% [one of 122]). Follow-up time was the only factor that was associated with revision of primary PFRs. Neither segment length nor stem length were associated with revision of primary. Six percent (seven of 122) of PFRs were converted to THA at a mean 15 ± 8 years from the index procedure. Survivorship free from conversion to THA (accounting for death as a competing risk) was 94% (95% CI 85% to 99%), 86% (95% CI 68% to 94%). and 77% (95% CI 51% to 91%) at 10, 20, and 30 years, respectively. Cemented bipolar PFRs for an oncologic indication are a relatively durable reconstruction technique. Given the relative longevity and efficacy of PFRs demonstrated in our study, especially in patients with high-grade or metastatic disease where implant survival until all-cause revision was longer than patient survival, surgeons should continue to seriously consider PFRs in appropriate patients. The relative rarity of these reconstructions limits the number of patients in this study as well as in current research; thus, further multi-institutional collaborations are needed to provide the most accurate prognostic data for our patients. Level III, therapeutic study.

Temporary arthrodesis through static spacer implantation in two-stage treatment of periprosthetic joint infections of the knee.

Treatment of chronic periprosthetic joint infection of the knee requires the removal of the implant and thorough debridement, with reimplantation in asecond stage surgery. Intramedullary spacers can be helpful during the interval between explantation and reimplantation and provide atemporary arthrodesis which fixes the knee in extension preserving leg length and administers local antibiotic therapy. Periprosthetic joint infection of the knee with large bony defects and severe infection of the native joint with advanced destruction/infiltration of the cartilage and bone and/or ligament insufficiency. Suspected antibiotic resistance of the microbiological pathogen to local antibiotic drugs, incompliant patient, and known allergy to bone cement or antibiotic. After implant removal, suitable metal rods are coated with antibiotic-loaded bone cement and inserted into the cleaned intramedullary canals of femur and tibia. Rods are joined at the joint line with aconnector and joint space is filled with more bone cement to achieve temporary and very stable arthrodesis. Partial weight-bearing and no flexion/extension while spacer is in place; second stage reimplantation as soon as infection is controlled. Complications related to the spacer were rare (5.3%). Reimplantation of an implant was possible in 95 of 113patients (84%), of those, 23 (20%) received an arthrodesis. Of the 95patients that were reimplanted, 14 showed signs of recurrent infection. Mean time to last follow-up was 15.6months post reimplantation. Mean knee pain was 2.9/10; overall function was good; 6patients had an extension lag; mean total range of motion was 88°.

The Use of Masquelet Technique and Impaction Bone Grafting for First Metatarsal Phalangeal Joint Fusion With Large Bony Defects: Surgical Technique Tip.

The Use of Masquelet Technique and Impaction Bone Grafting for First Metatarsal Phalangeal Joint Fusion With Large Bony Defects: Surgical Technique Tip.

Arthroscopically Assisted Anterior Bone Block for Shoulder Instability

Background: Shoulder instability is a common complaint, with treatment depending on the severity of the bony defect. Advancements in arthroscopic techniques have allowed for a less invasive surgery with decreased postoperative pain, improved graft placement, and better visualization. Indications: Large bony defects of the glenoid require bone block augmentation to reduce recurrent instability. In this presentation, arthroscopically assisted anterior bone block was performed with a distal tibial allograft to address recurrent anterior shoulder instability with a large glenoid defect. Technique Description: The patient is placed in a lateral decubitus position. Standard arthroscopic portals are made. The bone block is fashioned from a distal tibial allograft. Using a guide, drill holes are placed in the bone block. The guide is inserted from the posterior portal and placed parallel to the joint surface. Using drill sleeves, superior and inferior screw holes are drilled and a metal cannula is left in place to allow for shuttling of suture. Two anchors are placed on the glenoid to allow for capsule labral junction to be brought up to the graft once the graft is in place. The bone block is delivered through a dilated anterior portal and reduced. The sutures are tensioned. A button is placed on each set of looped sutures, a Nice knot is placed into each, and a tensioning device is tensioned. Once compression is achieved, knots are tied to perform final fixation over the buttons. A suture passing device is used to grab inferior capsule and labrum to the priorly placed anchor on the inferior glenoid and tied. Results: Arthroscopically assisted anterior bone block for shoulder instability has been demonstrated to have similar clinical and radiographic outcomes when compared with open treatment. However, arthroscopically assisted Latarjet has been shown to have decreased soft tissue disruption and possible improvements in graft placement. Discussion/Conclusion: Arthroscopically assisted anterior bone block is a technically demanding surgery but has been shown to have similar outcomes when compared with open treatment. In this video, we demonstrate an arthroscopically assisted anterior bone block for recurrent anterior shoulder instability. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.

Vascularized Bone Flaps for Salvage Ankle Fusion

Objective: The ankle is a critical load-bearing joint for the lower extremity that is prone to damage from a variety of causes. Achieving stable bony fixation is paramount to restoring function after ankle injury. Initial attempts at fixation with hardware may fail, or large bone deficits may make primary fixation impossible. Vascularized bone grafts can be used to create stable and functional reconstruction of the ankle. Methods: We reviewed our experience using vascularized bone flaps to achieve bony ankle fusion in patients with unstable ankle joints. We then developed indications for whether the use of pedicled flaps versus free tissue transfer will best accomplish successful fusion. Results: At our institution, a single surgeon has performed 6 cases of vascularized bone grafts for ankle fusion. Three of these were pedicled fibula flaps and three were free fibula flaps. One of the free fibula flaps had persistent non-union and was salvaged with a medial femoral condyle free flap to achieve bony fusion. All patients had improved pain and were able to bear weight on the ankle joint post-operatively. Pedicled fibula flaps can be used when there is avascular necrosis of the talus or distal tibia, non-union after ankle fusion, failed total ankle replacement, or for large bony defects. Free fibula flaps are required when there is non-union of the distal fibula, if there is need for tibiotalocalcaneal fusion, and therefore need to extend the fibula to the calcaneus, or if the lateral malleolus has been already taken down during prior ankle fusion. Conclusion: Ankle reconstruction presents a challenging problem, but vascularized bone grafts can provide stable and functional results for patients. Using the indications we have developed for the use of pedicled flaps versus free tissue transfers can help other surgeons tackle these difficult cases. Corresponding Author: Gretchen Stieg MD, Department of Plastic & Reconstructive Surgery Detroit Medical Center/Wayne State University, 4160 John R, Suite 400, Detroit, MI 48201, Email: [email protected], Phone: (407) 252-0909

Return to sports after arthroscopic Bankart repair in teenage athletes: a retrospective cohort study

BackgroundAnterior shoulder instability is frequent among young athletes. Surgical treatment for this injury aims to facilitate an early return to sports (RTS). However, the rate of recurrent instability after surgery is reportedly high among young patients, and it is unclear whether surgery ensures satisfactory RTS. The purpose of this study was to verify the clinical outcomes and RTS after arthroscopic Bankart repair in competitive teenage athletes without critical bone loss in the glenoid.MethodsWe retrospectively reviewed competitive teenage athletes who underwent arthroscopic Bankart repair. Patients with large bony defects in the glenoid, larger than 20% of the healthy side, were excluded. Clinical outcomes, recurrent instability, the final level of RTS, and the time needed for RTS were analyzed.ResultsIn total, 50 patients with a mean follow-up period of 44.5 ± 19.6 (range, 24–85 months) months were included. The mean age at surgery was 16.8 ± 1.7 (range, 13–19 years) years. Two patients (4.0%) experienced recurrent instability. All patients returned to sports, 96% of patients participated competitively, and 76% achieved a complete return to the pre-injury level without any complaints. The time for RTS was 6.6 ± 2.7 months (range, 3–18 months), to competitions was 9.3 ± 4.0 (range, 6–24 months) months, and to complete return was 10.6 ± 4.3 (range, 8–24 months) months. The complete return rates varied by sports type, with 82% in contact athletes, 59% in dominant-hand overhead athletes, and 100% in other athletes (P = 0.026). Other preoperative factors or concomitant lesion such as bony Bankart, superior labrum tear, or humeral avulsion of glenohumeral ligament lesion did not affect the complete RTS.ConclusionArthroscopic Bankart repair is an effective surgical procedure for anterior shoulder instability, even among competitive teenage athletes. Sports type was the only factor associated with complete RTS after surgery.

Vascularized Bone Graft Reconstruction for Upper Extremity Defects: A Review.

Upper extremity reconstruction may pose clinical challenges for surgeons due to the often-critical, complex functional demands of the damaged and/or missing structures. The advent of vascularized bone grafts (VBGs) has aided in reconstruction of upper extremity (UE) defects due to their superior regenerative properties compared with nonvascularized bone grafts, ability to reconstruct large bony defects, and multiple donor site options. VBGs may be pedicled or free transfers and have the potential for composite tissue transfers when bone and soft tissue are needed. This article provides a comprehensive up-to-date review of VBGs, the commonly reported donor sites, and their indications for the treatment of specific UE defects.

Implant Survival in Tissue-Engineered Mandibular Reconstruction-Early Experiences.

This article is to evaluate the early outcomes of dental implants placed in bone generated with tissueengineering techniques, specifically recombinant human bone morphogenic protein-2 (rhBMP-2), allogeneicbone particulate, and bone marrow aspirate concentrate (BMAC) in patients with resection of benignpathology. To evaluate the long-term prognosis of dental implants placed in tissue engineered mandibular reconstruction. We retrospectively evaluated 12 patient records, all of whom underwent segmental mandibular resection of benign pathology and reconstruction with a combination of BMAC, rhBMP-2, and allogeneic bone. Collecteddata points included the patient's age, gender, medical and social histories, implant site and placement date, resection/reconstruction date, final prosthesis, pathology resected, and follow-up dates (average 25 monthsof follow-up). Implant success was defined as clinical osseointegration (immobility), absence of peri-implantradiolucency, and absence of infection. Twelve patients met inclusion criteria with a total of 46 implants. The overall implant survival rate was 91.3%. There were 4 implant failures occurring in two patients: 1 failure in Patient 3 and 3 failures in Patient 8. Neitherpatient had any existing medical comorbidities or social history known to increase the risk for implant failure. The average implant placement occurred 11.6 months after mandibular reconstruction. Preliminary findings of implant placement in bone generated with tissue engineering techniques have shown to be another predictable alternative for orofacial rehabilitation. Practical Implications: Dental rehabilitationusing dental implants is a predictable treatment option for patients that have required reconstruction of largebony defects status post resection of benign pathology using novel tissue engineering techniques.

Palatal bone anchorage of PMMC flap – A novel technique for palatal reconstruction in oral cancers

Resection of oral cancers involving upper alveolus/maxilla/palate produce large bony defects, reconstruction of which pose a surgical challenge. Various flaps are being used for palatal reconstruction including free flaps and pedicled flaps. Suturing at the flap-palatal mucosal junction is a challenge and is a common site for gaping and dehiscence leading to flap failure. In our case we propose a novel technique of palatal bone anchorage of PMMC flap for palatal reconstruction, which can provide greater stability at flap-palatal mucosal junction and improved flap outcomes.

Free Vascularized Fibula Salvage of Failed CPH in Pediatric Sarcoma Patients.

Background Due to extended life expectancy and recent improvements in surgical techniques, limb salvage has replaced amputation as the gold standard and is now performed in 90–95% of upper extremity malignancies. However, many of these salvage procedures are associated with significant postsurgical complications. In particular, the clavicula pro humero (CPH) procedure is associated with high rates of nonunion. We present our experience with upper extremity salvage using the free vascularized fibular flap (VFF) after failure or nonunion of the original CPH procedure in the pediatric population. Methods Five patients under the age of 18 diagnosed with upper extremity sarcoma who underwent tumor resection with immediate CPH reconstruction complicated with nonunion, and subsequent revision with free VFF were included. Data on patient demographics, oncologic characteristics, surgical procedures, intraoperative details, postoperative complications, and time to graft union were recorded. Results Five patients (average age = 8.4 years; range = 5–10 years at surgery date) underwent secondary limb salvage procedure with free VFF reconstruction following failed CPH reconstruction for proximal humeral osteosarcoma (n = 4) or Ewing sarcoma (n = 1). The mean follow-up was 3.7 years. Complications occurred in five patients (100%), with three patients requiring reoperation (60%). Four patients achieved graft union (average union time = 3.7 months) and successful limb reconstruction. Four patients were alive with no local recurrence of the disease. One patient did not achieve union and was lost to follow-up. Conclusion Primary bone tumors in the pediatric population require wide surgical resection, and reconstruction often has high complication rates that can warrant further procedures. A free VFF is a viable option for upper extremity salvage after previously failed reconstructions because it provides vascularized tissue to a scarred tissue bed and allows for the replacement or augmentation of large bony defects.

Severe mandibular osteomyelitis and exfoliation of a mandibular canine tooth in a Vietnamese potbellied pig

A 10-year-old male castrated Vietnamese potbellied pig presented for evaluation of a dermal mass present on the left cervico-mandibular region. The patient had a mass removed 6 years earlier from the same region, which was diagnosed as squamous cell carcinoma on histopathology. On physical examination, all vital parameters, including heart rate, respiratory rate and temperature, were within normal reference ranges, and the owner reported a normal appetite with no recent history of weight loss. Upon intubation for the dermal mass removal, a large heterogeneous mass of material was observed in the rostral aspect of the left mandible (Figure 1). Once removed, the mass appeared to be grossly composed of foodstuffs, hair, and a firm, mineralized segment of unknown material (Figure 2a). Within the contents of this debris, the left mandibular canine tooth (304) or tusk was identified. For the size of the mass of material, there was minimal inflammation associated with the gingiva and the mucosa (Figure 2b). There did not appear to be any evidence of displacement of the remaining teeth in the area. The periodontal attachment appeared to be normal in the remaining teeth. Computed tomography (CT) of the head was performed with the patient anaesthetized as previously described1 and positioned in sternal recumbency. Findings included severe, multifocal, chronic periodontal disease. The left mandibular canine tooth (304) or tusk was absent, and there was a large bony defect associated with the left mandibular body along the alveolar margin. The bony defect continued to affect the buccal aspect of the mandibular body (Figure 3). There was also extensive periapical lysis and evidence of external tooth resorption of the right mandibular canine tooth (404). The radiographic dental abnormalities were consistent with severe diffuse mandibular osteomyelitis characterized by multifocal moth-eaten bone lysis and irregular periosteal new bone formation, and multiple draining tracts from the right ventral mandible. Additional radiographic findings included absence of all premolar and molar teeth except the right first maxillary premolar (105), multifocal periapical lysis of the remaining teeth, bilateral medial retropharyngeal lymphadenopathy, and evidence of bilateral otitis externa and right otitis media. Miniature companion pigs (MCPs) are increasing in popularity as companion animal pets in North America.2 While data for exact numbers are limited, MCPs first appeared in the United States in the 1980s, with a dramatic increase in popularity over the past 17 years.3 With the increase in numbers, preventive care strategies are essential to improve animal health and welfare. Commonly reported dental pathologies in MCPs include missing teeth (most commonly the first mandibular premolar), periodontal disease, and tooth resorption.4 Early diagnosis of dental disease and mandibular osteomyelitis is important for companion animal pigs, considering their potentially long life span. Extraction of an infected tusk can be quite challenging. In cases of severe infection and disease, the integrity of the mandible can be affected to the point where it can be unstable after the extraction.5 Osteomyelitis can be managed with long-term antimicrobial therapy, including oral, injectable, and regional infusion of antibiotic-impregnated compounds, depending on lesion location.6 Removal of the infected nidus, in many cases the tooth, is critical for a positive long-term outcome. A complete oral assessment with inclusion of dental radiographs in MCPs should be considered for proper preventative dental care.4 As evidenced by our case, CT is also beneficial for a thorough oral evaluation and dental assessment. The authors declare no conflict of interest. This case represents a retrospective clinical case report and not a prospective study that requires institutional approval. The authors received no specific funding for this work. Open access funding provided by the Iowa State University Library.