Lanthanide-based Metal-organic Frameworks Research Articles

Leap-Type Response of Redox/Photo-Active Lanthanide-Based Metal-Organic Frameworks for Early and Accurate Screening of Prostate Cancer.

The development of high-accuracy technologies to distinguish the quite tiny concentration change of tumor markers between negative and positive is of vital significance for early screening and diagnosis of cancers, but is still a great challenge for the conventional biosensors because of their "gradual" detection mode. Herein, a unique "leap-type" responsive lanthanide MOF-based biosensor (designated as Tb-CeMOF-X) with defect-mediated redox-/photo-activities is developed for precisely identifying acid phosphatase (ACP), an early pathological marker of prostate cancer (PCa) in serum. The engineered Tb-CeMOF-X probe achieves a bursting switch-on luminescence at the critical concentration of ACP (9 U ⋅ L-1), while keeping silent below this threshold, undergoing a qualitative signal change from "zero" to "one" between negative and positive indicators and thus significantly improving the identification precision. Significantly, such "leap-type" response performance can be further edited and amplified by rational defect engineering in the crystal structure to improve the accessibility of active centers, consequently maximizing the detection sensitivity toward ACP in the complex biological media. This study proposes the first paradigm for the development of "leap-type" biosensors with ultra-sensitive differentiation capability between negative and positive, and provides a potentially valuable tool for early and accurate screening of PCa.

Dissolution-Recrystallization: A Novel Mechanism for Fluorochromic Detection of Th4+ Using Color-Tunable Luminescent Metal-Organic Frameworks.

Thorium, a predominant actinide in the Earth's crust, presents significant environmental and health risks due to its radioactive nature. These risks are particularly pronounced during the mining and processing of monazite for rare earth elements (REEs), which contain substantial thorium concentrations. Current instrumental analysis methods for thorium, offer high accuracy but require laborious sample preparations and expensive instruments, making them unsuitable for on-site analysis. Herein, we present a class of color-tunable luminescent lanthanide-based metal-organic frameworks (Ln-MOFs) as fluorochromic sensors for Th4+ cations. Utilizing a heterobimetallic Eu3+/Tb3+ doping strategy, the luminescence colors of EuxTb1-x-BDC-OH can be finely tuned from red, to orange, and to green. More intriguingly, the higher Lewis acidity of Th4+ facilitates the transformation of EuxTb1-x-BDC-OH into a UiO-type Th-MOF via a dissolution-recrystallization mechanism. This process results in a gradual reduction of characteristic Ln3+ emissions and the emergence of blue color ligand-based fluorescence, thereby leading to selective fluorochromic responses with increasing Th4+ concentrations and enabling visible detection of Th4+ cations. Additionally, a custom-built portable optoelectronic device is fabricated, which directly converts luminescence colors into red-green-blue (RGB) values. This device enables easy quantification of Th4+ concentrations without the need for complex instrumentation.

Self‐Calibration Temperature Sensing and Color Tunable Emission in a Bimetallic Lanthanide Metal–Organic Framework

ABSTRACTTemperature in various scientific and industrial applications requires accurate detection and measurement. Herein, a range of novel isostructural lanthanide‐based metal–organic frameworks (Ln‐MOFs), [EuxTb2−x(3,5‐pdc)3(phen)2(H2O)2]n (x = 0, Tb‐MOF; x = 2, Eu‐MOF; x = 0.002, 0.010, 0.020, 0.040, 0.080, EuxTb2−x‐MOF), were solvothermally synthesized using 3,5‐pyridinedicarboxylic acid (3,5‐H2pdc) and 1,10‐phenanthroline (phen) as ligands. Based on binuclear second building units, Ln‐MOFs exhibited 2D layered structure with sql topology. The luminescent properties of series Ln‐MOFs show systematic tuning shifted from green to red by adjusting the ratio of Eu3+ to Tb3+. The temperature sensing experiments showed that Eu0.020Tb1.980‐MOF exhibited self‐calibration temperature response in a range of 293–413 K, achieving maximum relative sensitivity (Sr) 2.46%·K−1 at 413 K, outscoring many state‐of‐the‐art temperature sensors reported in literature. This study poses great promise of the newly designed Eu0.020Tb1.980‐MOF for the ultra‐sensitive temperature sensing in diverse and large‐scale applications.

Appraising the structural and magnetic properties in template assisted neodymium based metal organic frameworks

This study demonstrates synthesis of two novel lanthanide-based metal-organic frameworks, namely [{NdIII(5 N3-H2isa)2(H2O)2}(H2O)2}]∞ (1) and [{NdIII(5 N3-H2isa)2(H2O)2}(H2O)(1,2-PE)}]∞ (2), synthesized via solvothermal methods using 5-azidoisophthalic acid (5 N3-H2isa) and NdCl3. Both compounds were extensively characterized using single crystal X-ray diffraction, as well as other physicochemical techniques such as IR, TGA, PXRD, and elemental analysis. Structural differences were observed in both compounds depending on the nature of the template molecule used. Compound 1 exhibits an infinite 2D architecture with lattice-occluded water molecules within the 2D layers. In contrast, compound 2, where 1-(-2-pyridyl)-2-(4-pyridyl)ethylene (1,2-PE) was used as the template, shows replacement of interstitial water molecules by the template molecule, resulting in significant changes in overall pore topology which is further corroborated by BET analysis. These structural variations were further supported by magnetic behaviour analyses, indicating an antiferromagnetic behaviour for both compounds.

An isostructural series of metal-organic frameworks: selective gas adsorption and sensing studies

The solvothermal reaction of Ln(NO3)3•6H2O (Ln = Nd, Sm, Eu, Tb, and Dy) with 9,10-bis(4-carboxylatopyridinium-1-methylene)anthracene dibromide (H2L)Br2 resulted in the formation of an isostructural series of lanthanide-based metal organic frameworks (Ln-MOFs), {[Nd(L)3/2(H2O)2]·(NO3)3·(S)}n (1), {[Sm(L)3/2(H2O)2]·(NO3)3·(S)}n (2), {[Eu(L)3/2(H2O)2]·(NO3)3·(S)}n (3), {[Tb(L)3/2(H2O)2]·(NO3)3·(S)}n (4) and {[Dy(L)3/2(H2O)2]·(NO3)3·(S)}n (5), where S denotes squeezed disordered solvent molecules and out of three nitrate ions in the voids, one nitrate is squeezed due to the high disorder. These MOFs were characterized with various techniques and single crystal X-ray analysis revealed a three dimensional (3D) (4,4,6)-connected metal organic framework with mononuclear metallic nodes in bicapped trigonal prismatic geometry. From the present series, we selected {[Sm(L)3/2(H2O)2]·(NO3)3·(S)}n (2) as a representative example for structural description and gas adsorption study whereas {[Dy(L)3/2(H2O)2]·(NO3)3·(S)}n (5) was used for the sensing of nitro compounds. All MOFs showed stability up to 200 °C. 2 demonstrates a higher CO2 uptake, despite exhibiting a low specific surface area (SABET) in N2 sorption studies. The sensing result shows that 5 act as selective sensors towards TNP with quenching efficiency greater than 99%.

Unveiling the electronic origin of lanthanide based Metal Organic Framework with ideal spin filtering capacity

Recently, a three dimensional metal-organic framework (MOF) based on Dy(III) and the L-tartrate ligand was experimentally shown to exhibit a spin polarization (SP) power of 100% at room temperature. The material’s spin filtering ability was ascribed to the chiral-induced spin selectivity (CISS) effect. In this work, we computationally characterize the electronic structure of this MOF, revealing that the high SP of the material is linked to the asymmetric arrangement, around the Fermi level, of the alpha- and beta-spin electron states arising from the 4f-states of the lanthanide Dy atom, which results in two different conduction channels (band gaps) for each spin state. Based on the understanding gathered in this work, we propose that the substitution of the hydroxyl groups of the ligand by mercaptan groups should boost the electrical conductivity, while retaining the spin filtering power of the material.

Optimizing the spin qubit performance of lanthanide-based metal–organic frameworks

Reducing the spin concentration, spin-orbit coupling strength, and ground spin state of lanthanide ions embedded in metal–organic frameworks improves their spin qubit performance.

A dual-ligand lanthanide-based metal-organic framework for highly selective and sensitive colorimetric detection of Fe2.

Accumulation of heavy metals in humans and mammals causes health problems due to their abundance as transition metal ions. Iron (Fe2+) serves significantly in numerous biological processes as a heavy metal ion. In this study, we have designed and prepared a metal-organic framework (MOF) utilizing a one-step solvothermal process, incorporating a dual-ligand combination of terephthalic acid (H2BDC) and α,α',α''-tert-pyridine (TPY) with Eu3+ as the metal node. For this MOF, we termed it Eu-BDC/TPY. Eu-BDC/TPY has superior selectivity over other metal cations. It provides an accurate, sensitive, broad linear range colorimetric method for detecting Fe2+ in a concentration range of 1-50 μM with a modest limit of detection (0.33 μM). Eu-BDC/TPY detects the absence of Fe2+ quickly (within 5 seconds), which is very valuable in practical applications. In addition, the results can be used to create a digital image colorimetric card (DIC) using colorimetric software, enabling instantaneous detection of Fe2+ concentration using a smartphone.

Solvent- and pH-Stable Eu(III)-Based Metal-Organic Framework with Phosphate-Ratio Fluorescence Sensing and Significant Proton Conduction.

Lanthanide-based metal-organic frameworks show good potential for applications due to their unique structures and functional properties. A highly thermally and acid-base stable Eu-MOF was synthesized by a solvothermal method with the molecular formula {[(CH3)2NH2]2[Eu2(NDDP)2(H2O)2]·H2O}n (Eu-MOF, H4NDDP = 5,5'-(naphthalene-2,6-diyl)diisophthalic acid). Eu-MOF takes a three-dimensional (4,4,8)-connected topology. The water molecules involved in the coordination, free water molecules, and [(CH3)2NH2]+ cations in the pore can be used as proton carriers. The proton conductivity attains 1.25 × 10-4 S cm-1 at room temperature and 2.42 × 10-3 S cm-1 at 70 °C and 98% relative humidity. Combined with the dual-emission properties from the ligands and Eu(III) ions enables Eu-MOF to be used as a ratiometric fluorescent sensor for phosphate efficiently and rapidly, with a limit of detection of 0.12 μM in the Tris-HCl buffer solution. These results provide a new approach for the construction of MOFs with high proton conductivity and a ratiometric fluorescence response.

Design and synthesis of novel lanthanide-based metal–organic frameworks (MOFs) for catalytic hydrogenation of carbon dioxide to formic acid

Design and synthesis of novel lanthanide-based metal–organic frameworks (MOFs) for catalytic hydrogenation of carbon dioxide to formic acid

Dual-Functional Eu-Metal-Organic Framework with Ratiometric Fluorescent Broad-Spectrum Sensing of Benzophenone-like Ultraviolet Filters and High Proton Conduction.

The construction of attractive dual-functional lanthanide-based metal-organic frameworks (Ln-MOFs) with ratiometric fluorescent detection and proton conductivity is significant and challenging. Herein, a three-dimensional (3D) Eu-MOF, namely, [Eu4(HL)2(SBA)4(H2O)6]·9H2O, has been hydrothermally synthesized with a dual-ligand strategy, using (4-carboxypiperidyl)-N-methylenephosphonic acid (H3L = H2O3PCH2-NC5H9-COOH) and 4-sulfobenzoic acid monopotassium salt (KHSBA = KO3SC6H4COOH) as organic linkers. Eu-MOF showed ratiometric fluorescent broad-spectrum sensing of benzophenone-like ultraviolet filters (BP-like UVFs) with satisfactory sensitivity, selectivity, and low limits of detection in water/ethanol (1:1, v/v) solutions and real urine systems. A portable test paper was prepared for the convenience of actual detection. The potential sensing mechanisms were thoroughly analyzed by diversified experiments. The synergistic effect of the forbidden energy transfer from the ligand to Eu3+, the internal filtration effect (IFE), the formation of a complex, and weak interactions between the KHSBA ligand and BP-like UVFs is responsible for the ratiometric sensing effect. Meanwhile, Eu-MOF displayed relatively high proton conductivity of 2.60 × 10-4 S cm-1 at 368 K and 95% relative humidity (RH), making it a potential material for proton conduction. This work provides valuable guidance for the facile and effective design and construction of multifunctional Ln-MOFs with promising performance.

Novel Lanthanide-Based Metal–Organic Framework Isomer as a Double Ratiometric Fluorescent Probe for Vanillymandelic Acid

The concentration of vanillymandelic acid (VMA) in urine is closely related with pheochromocytoma diagnosis. Thus, it is essential to develop more accurate and convenient fluorescence sensing strategies toward VMA. Until now, the design of double ratiometric detection methods for VMA was still in the unexplored stage. In this work, novel Ln3+-based metal-organic frameworks (QBA-Eu and QBA-Gd0.875Eu0.125) possessing dual emission peaks was fabricated successfully, which served as isomers of YNU-1 and exhibited more excellent water stability in fluorescence and structure than the ones of YNU-1. The formation of the complex between QBA ligands and VMA molecules via hydrogen bonds within QBA-Eu frameworks produced a new emission band centered at 450 nm and resulted in the decline of monomer emission intensity for QBA at 390 nm. Owing to the reduced energy gap [ΔE (S1 - T1)], the antenna effect was hampered and luminescence of Eu3+ ions also decreased. The developed double ratiometric (I615nm/I475nm, I390nm/I475nm) fluorescence sensors based on QBA-Eu and QBA-Gd0.875Eu0.125 possessed the advantages of fast response (4 min), low detection limits (0.58 and 0.51; 0.22 and 0.31 μM), and wide linear ranges (2-100 and 2-80 μM), which met the requirements of pheochromocytoma diagnosis. We also applied them to determine VMA in an artificial urine sample and diluted human urine sample and obtained satisfactory results. They will become prospective fluorescence sensing platforms for VMA.

High-Performance X-Ray Imaging using Lanthanide Metal-Organic Frameworks.

Scintillating materials that convert ionizing radiation into low-energy photons hold great potential for radiation detection, nondestructive inspection, medical radiography, and space exploration. However, organic scintillators are characterized by low radioluminescence, while bulky inorganic scintillators are not suitable for the development of flexible detectors. Here, high-resolution X-ray imaging using solution-processable lanthanide-based metal-organic frameworks as microscale scintillators is demonstrated. Mechanistic studies suggest that lanthanide ions absorb X-rays to generate high-density molecular triplet excitons, and excited linkers subsequently sensitize lanthanide ions via nonradiative resonance energy transfer. Furthermore, the crystalline nature offers a delocalized electronic feature rather than isolated subunits, which enables direct trapping of charge carriers by lanthanide emitters. By controlling the concentration ratio between Tb3+ and Eu3+ ions, efficient and color-tunable radioluminescence of lanthanide ions can be achieved. When coupled with elastic, transparent polymer matrices, these metal-organic framework-based microscintillators allow the fabrication of flexible X-ray detectors. Such detectors feature a detection limit of 23 nGy s-1 , which is 240 times lower than the typical radiation dose for medical diagnosis. X-ray imaging with resolution higher than 16.6 line pairs per millimeter is further demonstrated. These findings provide insight into the future design of hybrid scintillators for optoelectronics and X-ray sensing and imaging.

Heterometallic Gd-Dy Formate Frameworks for Enhanced Magnetocaloric Properties.

Lanthanide-based metal-organic frameworks (MOFs) have great potential as magnetic refrigerants under cryogenic conditions and are comparable to conventional alloys and magnetic nanoparticles. In particular, MOFs with Gd3+ ions behave as excellent magnetic refrigerants because of their large spin ground states. However, the major drawback of Gd3+-based MOFs is that they are not affected by the ligand material owing to the excessively large spin-only magnetic moment; therefore, their application is limited to the cryogenic region in the magnetic cooling field. In this study, we report the magnetic properties and magnetocaloric effect (MCE) resulting from heterogenized MOFs obtained from the reaction of Gd3+ and Dy3+ ions and their varied molar composition with the formate ligand. For GdxDy1-x-(HCOO)3, where 0 ≤ x ≤ 1, the isothermal magnetic entropy change (ΔSm) increased with the increase in the fraction of Gd in the heterogenized MOFs. Meanwhile, with increasing Dy contents, the maximum peak temperature of ΔSm is shifted to a higher temperature while preserving a relatively high ΔSm value of 22.35 J·kg-1 K-1 at T = 7 K for an applied field change (ΔH) of 7 T despite the anisotropy and crystalline electric field effects. Furthermore, it was confirmed that the samples with a Dy content of 75% or more maintained the ΔSm operating temperature longer. Therefore, the current approach of including Dy3+ ions in lanthanide compounds provides the possibility of further extending the operating temperature of magnetic cooling materials from cryogenic temperatures.

Three-Dimensional Lanthanide-Based Nanoporous Metal–Organic Frameworks for High-Performance Supercapacitors

Lanthanides have been proved to be unprecedented when it comes to organized nanoporous materials with high coordination environment. In the quest to enhance the applications for energy-storage materials, three lanthanide-based metal–organic frameworks (MOFs) have been synthesized by facile hydrothermal conditions using 5-nitroisophthalic acid (H2L) as a ligand, namely, Ce–H2L, Sm–H2L, and Eu–H2L. These nanoporous MOFs consist of nine coordination sites around the lanthanide metal ion giving rise to distorted monocapped square antiprism geometry and 3D crystal structures. The electrochemical measurements demonstrate that charge storage in these MOFs occurs through faradaic redox reactions. The charge–discharge studies show that these nanoporous MOF materials deliver high specific capacity. Ce–H2L, Sm–H2L, and Eu–H2L deliver specific capacities of 625, 356, and 252 C g–1 (1389, 791, and 560 F g–1), respectively, at a current density of 1 A g–1. A symmetric supercapacitor Swagelok device has been fabricated using Ce–H2L as an electrode to further demonstrate the advantage of as-synthesized MOF. The developed symmetric supercapacitor gives a maximum specific energy of 13.6 Wh kg–1 and a maximum specific power of 7110 W kg–1 in the voltage window of 1.425 V. The energy storage trend in these nanoporous materials is Ce–H2L > Sm–H2L > Eu–H2L, which is further supported by the DFT calculations.

Expanding the Knowledge of the Selective-Sensing Mechanism of Nitro Compounds by Luminescent Terbium Metal-Organic Frameworks through Multiconfigurational ab Initio Calculations.

The current research shows that the excited-state dynamics of the antenna ligand, both in the interacting system sensor/analyte and in the sensor without analyte, is a safe tool for elucidating the detection principle of the luminescent lanthanide-based metal-organic framework sensors. In this report the detection principle of the luminescence quenching mechanism in two Tb-based MOFs sensors is elucidated. The first system is a luminescent Tb-MOF [Tb(BTTA)1.5(H2O)4.5]n (H2BTTA = 2,5-bis(1H-1,2,4-triazol-1-yl) terephthalic acid) selective to nitrobenzene (NB), labeled as Tb-1. The second system is {[Tb(DPYT)(BPDC)1/2(NO3)]·H2O}n (DPYT = 2,5-di(pyridin-4-yl) terephthalic acid, BPDC = biphenyl-4,4'-dicarboxylic acid), reported as a selective chemical sensor to nitromethane (NM) in situ, labeled as Tb-2. The luminescence quenching of the MOFs is promoted by intermolecular interactions with the analytes that induce destabilization of the T1 electronic state of the linker "antenna", altering thus the sensitization pathways of the Tb atoms. This study demonstrates the value of host-guest interaction simulations and the rate constants of the radiative and nonradiative processes in understanding and elucidating the sensing mechanism in Ln-MOF sensors.

Efficient and selective fluorescence sensing of nitro-containing aromatic compounds by a binuclear lanthanide-based metal-organic framework

The rapid and selective detection of the highly toxic and explosive nitro-containing aromatic compounds has been drawn more and more attention. Herein, a lanthanide-based metal-organic framework (1) was synthesized by incorporating a tetraphenylethylene moiety as the four-point connected node, and exhibits a three-dimensional porous material. This new synthesized MOF exhibits excellent fluorescence activity, due to the ligand-emission effect, and could be regarded as a sensitive and selective fluorescence sensor for p-nitroaniline (NA) over the nitro-containing aromatic compounds with almost complete fluorescence quenching after adding NA into the suspension system. The mechanism of fluorescence sensing process has been also researched by DFT studies and UV–vis adsorption spectra to gain an insight analysis.

Multifunctional Lanthanide-Based Metal-Organic Frameworks Derived from 3-Amino-4-hydroxybenzoate: Single-Molecule Magnet Behavior, Luminescent Properties for Thermometry, and CO2 Adsorptive Capacity.

Herein, we describe and study a new family of isostructural multifunctional metal–organic frameworks (MOFs) with the formula {[Ln5L6(OH)3(DMF)3]·5H2O}n (where (H2L) is 3-amino-4-hydroxybenzoic acid ligand) for magnetism and photoluminescence. Interestingly, three of the materials (Dy-, Er-, and Yb-based MOFs) present single-molecule magnet (SMM) behavior derived from the magnetic anisotropy of the lanthanide ions as a consequence of the adequate electronic distribution of the coordination environment. Additionally, photoluminescence properties of the ligand in combination with Eu and Tb counterparts were studied, including the heterometallic Eu–Tb mixed MOF that shows potential as ratiometric luminescent thermometers. Finally, the porous nature of the framework allowed showing the CO2 sorption capacity.

Magnetically recyclable nanocomposites via lanthanide-based MOFs grown on natural sea sponge: Screening hydrogenation of nitrophenol to aminophenol

Catalysts have played a significant role in chemical industries and received significant attention as a result. Unfortunately, many common catalytic systems are comprised of a small number of elemental species or use similar synthetic strategies, which potentially limit innovation in areas such as the discovery of new transformations. Metal-organic frameworks (MOFs) have been established as versatile materials employed in various applications that include catalysis; however, the majority of MOFs have been synthesized using transition metal building blocks, possibly hindering advances towards innovative materials with unique properties. This work reports the synthesis of MOFs based on lanthanide elements (Ln = Ce, Gd, La, and Sm), which demonstrate great potential yet are often overlooked. The Ln-based MOFs were grown in situ on natural sea sponge supports and Fe ion containing solution, followed by a thermal carbonization treatment to generate FeLn metal nanoparticles (NPs) embedded on carbon support (FeLn@C). These nanostructured products exhibited good crystallinity and well-confined particle sizes. We then demonstrate that these hybrid materials can be used as effective heterogeneous nanocatalysts for the hydrogenation of nitrophenol to aminophenol in aqueous media. Besides, FeLn@C catalysts had a magnetic property due to Fe atoms in the NPs, which can be mechanically separated out from the aqueous solution since the catalysts are magnetically attracted to the external magnets. This magnetic recyclability combined with the usage of the natural materials highlight the importance of sustainability in the design of Ln-based MOFs and their catalytic applications.

Dye-Encapsulated Lanthanide-Based Metal-Organic Frameworks as a Dual-Emission Sensitization Platform for Alachlor Sensing.

As an important factor affecting global agricultural output, pesticides have a significant impact on the ecosystem. It is an urgent task to accurately and conveniently detect pesticide residues after their application. Herein, a fluorescent dye@MOF platform was designed via the encapsulation of rhodamine B (RhB) into the MOF structure (named RhB@HNU-48), which can significantly enhance the sensing sensitivity of alachlor with an ultralow detection limit of 0.59 ppb. The improved sensitivity of RhB@HNU-48 to pesticides was attributed to the host-guest interactions that affect the excitation and emission spectra of the composites. Based on the sensing capability of RhB@HNU-48, a logic gate was built to evaluate the safety level of alachlor residues in rivers and soil. The preparation of photofunctionalized MOF composites through modulation of host-guest interactions offers a promising strategy for the construction of desired sensors for agricultural residues.