Langmuir Isotherm Research Articles

Removal of anionic dye from textile effluent using zirconium phosphate loaded polyaniline-graphene oxide composite: Lab to pilot scale evaluation

Efficient filtering of dyes is essential for the protection of ecosystem and human health due to the considerable water pollution caused by the effluents released from the sector. We present a simple, scalable UV radiation-assisted method for treating methyl orange dye-polluted water from the textile industry using zirconium phosphate-loaded polyaniline-graphene oxide (PGZrP) composite. The new material was synthesized by sonochemically incorporating a polyaniline-graphene oxide composite with hydrothermally synthesized zirconium phosphate. The efficacy of PGZrP in eliminating methyl orange was evaluated using experimental conditions, and the adsorption capacity was investigated as a function of pH, temperature, adsorbent dosage, and adsorption period. The system follows Langmuir adsorption isotherm with pseudo-second-order kinetics. Thermodynamics studies showed that enthalpy (H°) and entropy (S°) values are positive, indicating that the dye adsorption increases with increasing temperature and is an endothermic reaction. The maximum adsorption capacity was found to be 36.45379 mg/g for methyl orange. Using the COMSOL Multiphysics CFD Platform, an attempt was made to check the temperature and concentration profile of a PGZrP composite in a real industrial system. The predicted result shows that there is no significant temperature change in the material during the adsorption process and the concentration of dye is mainly located on the top region of the bed. The developed zirconium phosphate decorated polyaniline-graphene oxide composite can be successfully utilized for the effective removal of methyl orange from industrial wastewater in bulk quantity which is coming from the textile industry, and the composite can be reused for several cycles with good efficiency. In this work, we have designed a miniaturized proof of concept to remove methyl orange from water which showed good dye removal efficiency.

The development of Giant reed biochar for adsorption of Basic Blue 41 and Eriochrome Black T. azo dyes from wastewater

The textile industry is discharging high concentrations of anionic and cationic azo dyes into the nearby environment, which can cause adverse effects on public health, and the aquatic environment. Therefore, this study aimed to develop giant reed biochar and apply for the removal of Basic blue 41 (BB41) and Eriochrome black T (EBT) azo dyes from water. Characterization techniques such as BET surface area analyzer, Fourier-transform infrared spectroscopy (FT-IR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermal gravimetric analyzer (TGA) were applied for biochar description. The biochar exhibits a high fixed carbon content (80.4%), a low ash content (3.8%), a large surface area (429.0 m2/g), and good thermal stability. High removal efficiencies of BB41 98.6% and EBT 82.5% were recorded at the specific experimental condition. The experimental data were fitted with the Langmuir isotherm model at R2 0.99 for both dyes whereas the adsorption kinetics revealed the pseudo-second-order kinetics at R2∼\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\sim$$\\end{document} 1 and 0.99 for BB41 and EBT, respectively. Furthermore, four regenerations of biochar with adsorption performances of BB41 and EBT dyes were found to be 94.7% and 79.1%, respectively. Finally, this adsorbent can be considered an economically viable material for the removal of synthetic dyes from wastewater systems. In conclusion, the study findings showed that the adsorbent material is promising to apply for water and wastewater treatment but still, the study of adsorption interaction and modifications of the surface functionalities are essential to accommodate multipollutant removal from real water systems.

Preparation of Fe-Modified Diatomite-Based Ceramsite for Efficient Phosphate Adsorption: Utilizing Diatomite’s Distinctive Porous Structure and Surface Silanol Groups

Ceramsites are extensively employed as substrates for adsorbents in studies focused on phosphorus adsorption, leaving ceramsites crafted from diatomite less explored. Diatomite-based ceramsite, with its distinct porous architecture and surface silanol functionalities, is adept at supporting a variety of metal oxides, presenting a distinct advantage over other ceramsite variants. In light of this, the present study embarked on producing diatomite-based ceramsite using diatomite as the foundational material, subsequently enhancing it through the incorporation of Fe, thus yielding an Fe-modified diatomite-based ceramsite. Through adsorption testing, the modified ceramsite demonstrated a significantly improved adsorption capacity of 4.06 mg P/g, marking a substantial enhancement from the initial capacity of 0.9 mg P/g. The process of phosphorus adsorption exhibited a strong alignment with the Langmuir isotherm model and the pseudo-second-order kinetic model. In-depth analyses employing XRD, FTIR, zeta potential, and XPS techniques have revealed that the principal mechanisms driving the adsorption process are centered on interactions involving electrostatic forces, the formation of chemical precipitates, and the exchange of ligands. This investigation not only opens new avenues for the application of diatomite-based ceramsite but also lays down a theoretical foundation for its modification, thereby enriching the spectrum of its utility.

Sulfide-enhanced carboxymethyl cellulose stabilised nano zero-valent iron for chromium(VI) mitigation in water: Evidence from batch and column studies

The primary source of chromium pollution in water is industrial operations such as electroplating, leather tanning, and textile manufacture, which use chromium for its ability to resist corrosion. Hexavalent chromium (Cr(VI)), the most detrimental variant, presents significant health hazards, such as cancer. It is crucial to effectively manage and decrease chromium levels to protect human and environmental health, especially in industrial regions where its presence in water is a persistent issue. This work examined the removal of Cr(VI) by sulfidated carboxymethyl cellulose stabilised nano zerovalent iron (S-CMC-nZVI). S-CMC-nZVI exhibited outstanding uniformity and corrosion resistance. Batch experiments revealed that several factors influenced the degree to which S-CMC-nZVI particles eradicated Cr(VI). The parameters to be considered included pH, initial Cr(VI) concentration, coexisting ions, and S/Fe molar ratio. When the sulfur to iron molar ratio was increased from 0 to 0.4, Cr(VI) removal efficiency increased from 73.89 % to 99 %. A pseudo-second-order kinetic model described Cr(VI) removal, and the Langmuir isotherm model determined the highest adsorptive capacity (311.02 mg/g). The presence of bicarbonate and nitrate anions have minimal inhibitory effects on removal of Cr(VI). Experiments on polluted groundwater showed that synthesised nanoparticles may remove Cr(VI) over a long time. Column investigations showed that increasing S-CMC-NZVI concentration increased Cr(VI) removal. The Adsorption, reduction and coprecipitation were major processes responsible for Cr(VI) removal. The research demonstrates that S-CMC-nZVI is a promising material for the in-situ remediation of Cr(VI)-contaminated groundwater.

Investigation of the energy gap and anti-corrosion activities of triethanolamine lauryl sulfate for carbon steel in 1.0 M HCl using DFT theory and electrochemical studies

Corrosion inhibition is a critical strategy in the industry to mitigate the detrimental effects of corrosion. Green inhibitors are a concern and are encouraged to apply in various ways. Triethanolamine lauryl sulfate (TLS) investigates as a green corrosion inhibition for carbon steel in 1 M HCl using weight loss and electrochemical measurements. A weight loss study revealed that 100 μM of TLS had the highest inhibition effectiveness of 95.7 %. Tafel estimations from the polarization profiles showed that 100 μM had an optimal inhibition effectiveness of about 96.3 %. The physical adsorption of TLS on the carbon steel surface, which followed the Langmuir adsorption isotherm, was ascribed to the inhibitive effect. The results declare that TLS functioned as an inhibitor of mixed types. For TLS, the adsorption Gibb's free energy is −19.6 kJ mol−1, indicating spontaneous and physisorption-based. The energy gap of TLS is evaluated theoretically using density functional theory (DFT), and a lower value indicates its great donation ability of electron’s to the carbon steel. The mechanism of adsorption of TLS onto the metal surfaces is illustrated in terms of experimental and theoretical calculations.

P-Morpholinomethylcalix[4]arene incorporated polyacrylonitrile nanofibers as selective adsorbent for removal of Cu+2 from aqueous environment

ABSTRACT In this study, p-morpholinomethylcalix[4]arene (p-MC4) was synthesized using Mannich reaction and utilized for the fabrication of polyacrylonitrile nanofibers impregnated with p-morpholinomethylcalix[4]arene (PAN/p-MC4) using electrospinning. The nanofibers were prepared by blending 12% solution of PAN with 20% solution of p-MC4. The PAN/p-MC4 NFs were thoroughly evaluated for their removal efficiency of Cu2+ from the aqueous media. The selectivity of PAN/-p-MC4 nanofibers was also examined by adsorbing a set of metal ions with same charge and similar ionic radius. The results of distribution ratio showed that PAN/p-MC4 nanofibers have superior selectivity for Cu2+ as compared to other heavy metal ions. The relative selectivity coefficients of PAN/p-MC4 nanofibers were found to be 25.2, 14.1, 8.9, and 4.03 for Cu2+/Ni2+, Cu2+/Co2+, Cu2+/Cd2+ and Cu2+/Pb2+, respectively. This indicates that PAN/p-MC4 nanofibers have a higher selectivity for Cu2+ ions. Numerous parameters such as pH, time, adsorbent dosage and analyte concentration were optimized to evaluate the maximum adsorption capacity of nanofibers for Cu2+. Adsorption isotherm models showed that the adsorption is promising and follows Langmuir adsorption isotherm. Whereas, PAN/p-MC4 nanofibers followed pseudo- second order kinetics during adsorption experiments. The PAN/p-MC4 nanofibers showed excellent adsorption capacity (q o ) of 65.35 mg/g for Cu2+ at pH 5 in 60 min under shaking speed of 120 rpm. Moreover, PAN/p-MC4 nanofibers had been used to remove Cu2+ from real surface water samples. According to the results, PAN/p-MC4 nanofibers are more effective adsorbent for removing Cu2+ from contaminated water.

Enhanced Removal of Cd(II) Ions from Aqueous Media via Adsorption on Facilely Synthesized Copper Ferrite Nanoparticles

In this study, magnetic copper ferrite (CuFe2O4) nanoparticles were synthesized via the Pechini sol-gel method and evaluated for the removal of Cd(II) ions from aqueous solutions. PF600 and PF800 refer to the samples that were synthesized at 600 °C and 800 °C, respectively. Comprehensive characterization using FTIR, XRD, FE-SEM, HR-TEM, and EDX confirmed the successful formation of CuFe2O4 spinel structures, with crystallite sizes of 22.64 nm (PF600) and 30.13 nm (PF800). FE-SEM analysis revealed particle diameters of 154.98 nm (PF600) and 230.05 nm (PF800), exhibiting spherical and irregular shapes. HR-TEM analysis further confirmed the presence of aggregated nanoparticles with average diameters of 52.26 nm (PF600) and 98.32 nm (PF800). The PF600 and PF800 nanoparticles exhibited exceptional adsorption capacities of 377.36 mg/g and 322.58 mg/g, respectively, significantly outperforming many materials reported in the literature. Adsorption followed the Langmuir isotherm model and pseudo-second-order kinetics, indicating monolayer adsorption and strong physisorption. The process was spontaneous, exothermic, and predominantly physical. Reusability tests demonstrated high adsorption efficiency across multiple cycles when desorbed with a 0.5 M ethylenediaminetetraacetic acid (EDTA) solution, emphasizing the practical applicability of these nanoparticles. The inherent magnetic properties of CuFe2O4 facilitated easy separation from the aqueous medium using a magnet, enabling efficient and cost-effective recovery of the adsorbent. These findings highlight the potential of CuFe2O4 nanoparticles, particularly PF600, for the effective and sustainable removal of Cd(II) ions from water.

Synthesis of Activated Charcoal from Coconut Shell for the Removal of Crude Oil Spill

Crude oil spills have devastating effects on the environment, particularly aquatic ecosystems. The purpose of the present research is to determine whether dry coconut shells can be used as raw materials to make activated charcoal (AC) via pyrolysis and whether they can be utilized as natural sorbents to clean up crude oil spills. The UV-Vis spectrum of the synthesized CSAC shows distinct peaks at 230 and 260 nm, whereas the activated charcoal exhibits peaks at 231 and 261 nm. The FTIR spectra of the synthesized CSAC reveal a medium broad absorption peak at 3307.2 cm⁻¹, while the raw coconut shell's FTIR spectra show a medium sharp peak at 2945.3 cm⁻¹. The SEM images highlight the unique structural properties of CSAC, showcasing high porosity, varied pore sizes, rough surface topography, and the presence of micropores and mesopores. The chemical activation significantly increased the hydrophobicity of the adsorbent, creating CSAC with a much better adsorption capacity for crude oil removal, having a maximum adsorption capacity of 4840.0 mg/g and the highest percentage of crude oil removal at 99.9985%, as proven by batch experiments for different adsorbent dosages. The batch experimental results indicated that the percentage of crude oil removal increased with an increase in adsorbent dosage and contact time. Based on the correlation coefficients (R²) values (close to unity), it was generally observed that the plots match the Freundlich isotherm better than the Langmuir isotherm model. These findings have made the synthetic CSAC an attractive, useful, and environmentally friendly adsorbent.

Fabrication and characterization of biodegradable hydrogel beads of guar gum for the removal of chlorpyrifos pesticide from water

A new guar gum hydrogel beads were fabricated by dropping method from an aqueous solution of guar gum (GG) using ammonium persulphate and polyethylene glycol as initiator and crosslinker respectively, for the adsorption of chlorpyrifos (CP) from water. The semi-crystalline nature of the synthesized beads was confirmed by FESEM analysis. The TGA studies implied that the beads were thermally stable up to 600 °C. The maximum swelling ratio of 1400 gg−1 was attained at pH 9.2 and 80 min. The evidence of a strong absorption band was found in FTIR spectrum at 584 cm−1 due to -P=S of the adsorbed pesticide CP. The maximum adsorption of CP was found to be 220.97 mgg−1. The adsorption followed pseudo second-order kinetics and Langmuir adsorption isotherm with regression coefficients 0.9998 and 0.9938 which followed the chemisorption process. It is due to the hydrolysis of CP at pH 9.2 to yield 3,5,6-trichloropyridinol which in turn reacts with the carboxylic group present in GG giving -N-C=O linkage. A -ΔG indicates that the process is spontaneous and involves chemisorption which is thermodynamically and kinetically favorable and a -ΔH value (−10.37 kJ/mol) suggests that the adsorption is exothermic.

Improving landfill liner performance with bentonite-slag blend permeated with ammonia for a Municipal solid waste landfill

Leachate emanating from landfills contains ammonia which may cause serious health effects on living things. An effectively designed clay barrier should not allow the contaminant to infiltrate the soil and groundwater systems. The utilization of certain industrial by-products in engineered landfill barriers, not only reduces the need for conventional liner materials but also helps in sustainable waste management. This study investigated the hydraulic conductivity, unconfined compressive strength, compaction, and adsorption characteristics of lithomargic clay blended with an optimum percentage of bentonite (10%) and granulated blast furnace slag (15%) permeated with ammonia. The results revealed that increasing the content of granulated blast furnace slag decreased the maximum dry density while increasing the optimum moisture content. In comparison to lithomargic clay, the hydraulic conductivity of the amended soil liner permeated with ammonia decreased from a value of 3 × 10−8 m/s to 5 × 10−10 m/s. The unconfined compressive strength of the amended soil specimens showed an increasing trend with curing times (i.e., 0, 14, 28, and 56 days). The batch adsorption results revealed that Freundlich and Langmuir's isotherm fits the equilibrium adsorption data and the adsorption of ammonia on clay liner follows non-linear behaviour. Overall, the experimental results implied that lithomargic clay blended with 10% bentonite and 15% granulated blast furnace slag can be used as an impermeable soil reactive barrier in engineered landfills.

Improved Cupressus sempervirens L. galls for methylene blue removal: adsorption kinetics optimisation using the DA-LS algorithm, characterisation, and machine learning modeling

ABSTRACT In this study, an investigation was conducted on the effectiveness of three bioadsorbents – galbuli of Cupressus sempervirens L. almond shells, and Luffa – for removing methylene blue (MB) from water. Various activation techniques and operational conditions were employed to enhance the adsorption capacity. The study focused on adsorption kinetics and equilibrium capacity. The results showed that microwave-dried galbuli of Cupressus sempervirens L. exhibited the highest adsorption capacity of 38.05 mg/g with an adsorption efficiency of 17.4%. To improve this capacity, the Dragonfly Algorithm-integrated least squares (DA-LS) was proposed to optimise the fitting of 32 adsorption isotherm models, which included a proposed modified Langmuir model. After optimisation, the sixth chemical treatment of Cupressus sempervirens L. reached a Langmuir isotherm qmax value of 84.44 mg/g, suggesting the high efficiency of the bioadsorbent compared to previous studies. Characterisation using microscopy and ATR-FTIR techniques revealed that chemical modifications led to rougher, microporous cellulose fibres and significant changes in the chemical structure, potentially enhancing the surface area and adsorption efficiency. To predict the adsorption capacity, the Support Vector Machine for Regression with DA (SVMR-DA) was utilised, achieving a root mean square error (RMSE) of 1.357 and an R2 of 0.9913. This high accuracy indicates a reliable model with a robust error distribution. These results suggest that Cupressus sempervirens L. can be an effective bioadsorbent for water treatment, with significant potential for industrial application.

Response surface modelling and optimization for copper removal from acid mine drainage using oxidized Himalayan pine needle biochar

ABSTRACT This study aims to investigate and compare the adsorption behaviour of pine needle biochar (PNB) and H2O2-oxidized PNB (OPNB) in eliminating Cu(II) from acid mine drainage. The PNB and OPNB adsorbents undergo comprehensive characterization through various techniques (BET, FTIR, SEM, and pHPZC). A central composite design was employed for designing experiments and optimizing the impact of process factors (metal concentration, adsorbent doses, contact time, and pH) on adsorption capacity. Pseudo-first-order, pseudo-second-order, and intra-particle diffusion kinetics models as well as Langmuir, Freundlich, and Temkin isotherm models were used to analyze the experimental data. Langmuir isotherm best fit (R2 > 0.99) the experimental data and adsorption capacities of 29.49 and 102.04 mg/g, were determined for PNB and OPNB, respectively. Under optimized experimental conditions, desorption studies revealed the reusability of OPNB about 80% even after four cycles. Fixed-bed column experiments were conducted at ambient temperature with an initial Cu(II) concentration of 125 mg/L and 5.0 g of adsorbent, utilizing a flow rate of 1 mL/min for both PNB and OPNB. These results indicate that oxidized biochar, synthesized for Cu(II) remediation, not only addresses Himalayan pine needle concerns sustainably but also exhibits potential applicability for removing other metal ions from aqueous environments.

Development of a continuous electrochemical reactor incorporated with waste-derived activated carbon electrode for the effective removal of hexavalent chromium from industrial effluent.

Being a recognized carcinogen, hexavalent chromium is hazardous to both human and environmental health. Thus, it is imperative to regulate and oversee their levels in a variety of industries, including textiles, dyes, pigments, and metal finishing. This study strives to reduce Cr(VI) in wastewater by using capacitive deionization in conjunction with an activated carbon-based electrode and a continuous electrochemical reactor (CER). Activated carbon derived from rubberwood sawdust demonstrated excellent properties, including a high surface area of 1157 m2g-1. The electrical conductivity and mechanical stability of the electrode were enhanced by the incorporation of synthesized expanded graphite (EG) into the AC. Key parameters were optimized via systematic batch electroreduction experiments with an optimal response surface design. The efficacy of the fabricated CER was proved when it successfully reduced Cr(VI) in a 5mg L-1 solution within 15min under optimized conditions, in contrast to the considerably longer durations anticipated by conventional methods. Validation of these findings was done by treating industrial wastewater of 30mg L-1 in the CER. The electroreduction of Cr(VI) followed the Langmuir isotherm with a maximum capacity of 13.491mgg-1 and pseudo-second-order kinetics. These results indicate that the combined use of the modified AC electrode and CER holds potential as a sustainable and economical approach to effectively eliminate Cr(VI) from wastewater.

Synthesis, spectroscopic characterization of a new schiff base molecule, investigation as an efficient corrosion inhibitor for copper in sulfuric acid medium: combination of experimental and theoretical researches

A new Schiff base inhibitor known as “N, N’ carbonyl- Bis (para-hydroxy benzaldehyde imine)” has been synthesized and characterized by FTIR, NMR, and UV-Visible spectroscopy, the molecule was then assessed for its ability to prevent copper from corroding in a solution of 0.5 M H2SO4 using potentiodynamic polarization, electrochemical impedance spectroscopy, scanning electron microscopy SEM combined with energy dispersion spectroscopy EDX, and atomic force microscopy AFM. The tested inhibitor exhibits good copper corrosion inhibition performance in a 0.5 M H2SO4 solution. As inhibitor concentration rises, inhibition performance also rises, reaching a maximum inhibitory efficacy of around 84.76 ± 0.69% at 5.10−4 M. The inhibitor was adsorbable to the metal surface and followed the Langmuir isotherm. It has been done such that the addition of KI increased the inhibitory effectiveness, the mixed additives worked together. There is good agreement between the conclusions drawn from theoretical calculations using DFT and MD simulation and actual observations.

Biosorption of reactive amoxicillin antibiotic on Pithophora macroalgae in aqueous solution: Equilibrium and kinetic studies

The removal of antibiotics is a significant environmental concern due to their complex structure. Therefore, scientists are working on novel and efficient techniques for removing antibiotic compounds from aqueous solutions. The current research aims to utilize green Pithophora macroalgae for extracting the antibiotic amoxicillin (AMX). An investigation into the kinetics and equilibrium mechanism of the biosorption of reactive AMX on macroalgae biomass in aqueous solutions has been conducted. The effects of operating factors such as initial AMX concentration, contact time, biosorbent dosage, agitation speed, and pH were investigated. FT-IR, SEM, and point of zero charge pH (PZC) techniques were used to characterize the biosorbent. The Langmuir and Freundlich isotherms were examined to determine which model better fits the experimental data. The experimental data best matches the Langmuir isotherm model for AMX biosorption, with a maximum sorption capacity of 25.83 mg g-1. The kinetic model for the experimental results follows the pseudo-second order (R2 = 0.9992). According to this study, the biomass of the macroalgae Pithophora has been shown to be a promising biosorbent for the biosorption of AMX antibiotics, making it suitable for practical water and wastewater treatment applications.

Adsorptive dye removal by Cu(II)-modified silica-alumina/polyaniline nanocomposite

The accelerated rate of industrial growth causes a lot of pollutants to be released into the environment. Therefore, the present work aimed at synthesizing a novel and environmentally friendly nanocomposite for eliminating dyes from wastewater. The (silica-alumina13 %)-Cu2+/polyaniline ((Si–Al)–Cu2+/PANI) nanocomposite was synthesized by the oxidative polymerization of aniline in the presence of (Si–Al)–Cu2+ composite. The nanocomposite was characterized by the FT-IR, XRD, BET, SEM, TEM, and EDX techniques. Its surface area was 287.7 m2/g and the pore diameter was 1.92 nm. The pseudo-second-order kinetic and the Langmuir isotherm models offered a satisfactory fit to the adsorption data. The removal percentage of the Acid blue 25 dye (AB25) by the nanocomposite reached 99 % within 60 min at pH 2, while the removal capacity was 135.86 mg/g. Based on the adsorption-desorption cycle results, the efficiency of the nanocomposite (99.7 %) remained unchanged up to the third cycle with a small decrease afterward. To corroborate the experimental results, a molecular modeling study was carried out using the basis function 6–311++G(d,p) and the DFT method to obtain the best molecular structure, physicochemical properties, and spectroscopic spectra of AB25 in the gas phase and water solvent. The electrostatic potential, Fuki functions, natural bond orbital, time-dependent DFT, and theoretical FT-IR were calculated. Furthermore, the adsorption of AB25 on the nanocomposite surface was verified by the Monte Carlo simulations. The computed data correlated well with the experimental results.

Insights into corrosion inhibition of aluminum in hydrochloric acid solutions using expired cephalosporins and klavox: Chemical, electrochemical and theoretical approaches

The inhibitory efficacy of two expired antibiotic drugs namely, cephalosporin and klavox against corrosion of aluminum in 1.0 M HCl solution was investigate utilizing potentiodynamic polarization (PDP) impedance spectroscopy (EIS) and weight reduction (WR) methodologies. It was discovered that the two expired drugs act as excellent inhibitors and the inhibition efficacy increases as the drug concentration increases and the temperature decreases. The inhibition efficacy reached 97.62 % and 99.42 % at 900 ppm of cephalosporin and klavox at 298 K, respectively. Expired drugs act as a mixed type inhibitor, controlling primarily the anodic and cathodic process, as evidenced by the PDP curves. According to EIS analysis, the charge transfer resistance values increased with increasing inhibitor concentration. The adsorption isotherm demonstrates that the expired drugs become active by physical adsorption on the Al surface, and their adsorption obeys the Langmuir isotherm. Through quantum chemistry calculations, the relationship between the inhibition properties and molecular structure was studied.

Synthesis and characterization of cellulose fibers modified zinc phosphate/hydroxyapatite core-shell as enhanced carrier of cisplatin: Loading, release, and cytotoxicity

The uncontrolled administration of the cisplatin drug (CPTN) resulted in numerous drawbacks. Therefore, effective, affordable, and biocompatible delivery systems were suggested to regulate the loading, release, and therapeutic effect of CPTN. Zinc phosphate/hydroxyapatite hybrid form (ZP/HP) and core-shell nano-rod morphology, as well as its functionalized derivative with cellulose (CF@ZP/HP), were synthesized by the facile dissolution precipitation method followed by mixing with cellulose fibers, respectively. The developed CF@ZP/HP displayed remarkable enhanced CPTN loading properties (418.2 mg/g) as compared to ZP/HP (259.8 mg/g). The CPTN loading behaviors into CF@ZP/HP follow the Langmuir isotherm properties (R2 > 0.98) in addition to the kinetic activities of the pseudo-first-order model (R2 > 0.96). The steric assessment validates the notable increase in the existing loading receptors after the functionalization of ZP/HP with CF from 57.7 mg/g (ZP/HP) to 90.5 mg/g. The functionalization also impacted the capacity of each existing receptor to be able to ensure 5 CPTN molecules. This, in addition to the loading energies (<40 kJ/mol), donates the loading of CPTN by physical multi-molecular processes and in vertical orientation. The CPTN releasing patterns of CF@ZP/HP exhibit slow and controlled properties (95.7 % after 200 h at pH 7.4 and 100 % after 120 h at pH 5.5), but faster than the properties of ZP/HP. The kinetic modeling of the release activities together with the diffusion exponent (>0.45) reflected the release of CPTN according to both erosion and diffusion mechanisms. The loading of CPTN into both ZP/HP and CF@ZP/HP also resulted in a marked enhancement in the anticancer activity of CPTN against human cervical epithelial malignancies (HeLa) (cell viability = 5.6 % (CPTN), 3.2 % (CPTN loaded ZP/HP), and 1.12 % (CPTN loaded CF@ZP/HP)).

Efficacy of mesoporous TiO2-ZrO2@g-C3N4 produced using a simple ultrasonic approach for copper ion removal from wastewater

The present study describes ultrasonically produced ternary composite material composed of carbon nitride nanosheets, zirconium, and titanium oxides for copper ions elimination. The formation of monoclinic ZrO2, anatase TiO2, and g-C3N4 phases with respective crystallite sizes 6, 11, 13 nm were verified by the X-ray diffraction technique. The dispersion of the metal oxides nanoparticles with the graphitic nanosheets, the elemental composition of Zr, Ti, O, C and N, and the characteristic functional groups were verified respectively by TEM, EDX, and FTIR analysis that confirmed the successful formation and composition of the nanocomposite TiO2-ZrO2@g-C3N4 (TZCN). The good porosity of the composite that show a surface area, pore volume, and pore diameter values of 47.42 m2/g, 0.056 cm3. g−1, and 20.3Å that nominate it for adsorption application. The adsorption capabilities of the nanocomposite were studied for copper ion removal from an aqueous solution, as well as the impacts of pH and starting Cu2+ concentration. The results show that the adsorption process is pH and starting concentration-dependent, with a maximum adsorption capacity of 447.8 mg g-1. The Cu2+ adsorption is a monolayer chemisorption process that is well described by the Langmuir adsorption model and follows pseudo-second-order kinetics. Moreover, a plausible mechanism for Cu2+ ion adsorption on the surface of TZCN nanocomposite particles is proposed.

Zirconium and Cerium Dioxide fabricated activated Carbon-Based Nanocomposites for Enhanced Adsorption and Photocatalytic Removal of Methylene Blue and Tetracycline Hydrochloride

Activated carbon (AC) is a porous, amorphous form of carbon known for its strong adsorption capacity, making it highly effective for use in wastewater treatment. In this investigation, AC-based nanocomposites (NCs) loaded with zirconium dioxide and cerium dioxide nanoparticles (ZrO2/CeO2 NPs) were successfully synthesized for the effective elimination of methylene blue (MB) and tetracycline hydrochloride (TCH). The AC-ZrO2/CeO2 NCs have a size of 231.83 nm, a zeta potential of -20.07 mV, and a PDI value of 0.160. The adsorption capacities of AC-ZrO2/CeO2 NCs for MB and TCH were proved in agreement with the Langmuir isotherm and pseudo 1st-order kinetic model, respectively. The maximum adsorption capacities were determined to be 75.54 mg/g for MB and 26.75 mg/g for TCH. Notably, AC-ZrO2/CeO2 NCs exhibited superior photocatalytic degradation efficiency for MB and TCH under sunlight irradiation with removal efficiencies reaching up to 95% and 79% within 90 min, respectively. The t1/2 for the photo-degradation process of MB and TCH were 11.55 min and 44.37 min. Analysis of active species trapping confirmed the involvement of hole (h+), superoxide anion (•O2−), and hydroxyl radical (•OH) in the degradation mechanism. Furthermore, the residual solution post-contaminant removal exhibited minimal toxicity towards Artemia salina and NIH3T3 cells. Importantly, the NCs did not exhibit antibacterial activity against tested pathogens post-absorption/degradation of TCH. Thus, AC-ZrO2/CeO2 NCs could be a promising nanomaterial for wastewater treatment applications.