Land, Vegetation, And Ice Sensor Research Articles

Refined GEDI Level-2A Database Construction: Focused on Gyeonggi Province, Republic of Korea

The Global Ecosystem Dynamics Investigation (GEDI), a full-waveform light detection and ranging system, translated the energy into a continuous waveform and recorded the signals chronologically for enabling geometric analysis of the vertical structure of vegetation. The National Aeronautics and Space Administration has used the land, vegetation, and ice sensor (LVIS) airborne laser altimeter system to measure terrain, tree heights, and vegetation carbon stocks in designated areas. The effectiveness of the collected LVIS data has been proven in mapping forest structures and biomass in tropical and temperate systems. Based on the successful achievements of LVIS, the GEDI aimed to establish a global range of forest data needed to analyze and predict the carbon cycle and climate change. The GEDI was launched aboard the SpaceX-16 in 2018 and successfully attached to the International Space Station (ISS) for a 2-year mission, but now extended until March 2023. Since being mounted on the ISS, GEDI measured over 10 billion cloud-free surface observations within the range of 51.6°N to 51.6°S. In this paper, GEDI mission is introduced, and the process of downloading, refining the GEDI level-2A product focused on Gyeonggi Province is outlined.

Integrating multi-source remote sensing data for mapping boreal forest canopy height and species in interior Alaska in support of radar modeling

Vegetation information is essential for analyzing aboveground biomass and understanding subsurface characteristics, such as root biomass, soil organic matter, and soil moisture conditions. In this study, we mapped boreal forest canopy height (FCH) and forest species (FS) distributions in the Delta Junction region of interior Alaska, by integrating multi-source remote sensing observations within a machine learning framework based on the extreme gradient boosting technique. Model inputs included multi-frequency (C-/L-/P-band) SAR observations from Sentinel-1, UAVSAR (Uninhabited Aerial Vehicle SAR) and AirMOSS (Airborne Microwave Observatory of Subcanopy and Subsurface), and Sentinel-2 optical reflectance data. LVIS (Land Vegetation and Ice Sensor) LiDAR measurements (RH98) and Tanana Valley State Forest timber inventory data were used as respective canopy height and species ground truth data. The combination of multi-source datasets produced the best model performance (RMSE 1.62 m for FCH, and 84.27% overall FS classification accuracy) over other models developed from single source observations. The resulting FCH and FS maps using multi-source datasets were derived at 30 m spatial resolution and showed favorable agreement with plot level field measurements from the Forest Inventory and Analysis record. The model results also captured characteristic differences in stand structure between dominant species and from post-fire vegetation succession. Our results show the potential of multi-source remote sensing observations, including low frequency microwave sensors, for monitoring boreal forest complexity and changes due to global warming.

Validation of beyond visual-line-of-sight drone photogrammetry for terrain and canopy height applications

Aerial drones enable detailed three-dimensional terrain and vegetation canopy reconstructions supporting a diverse set of environmental monitoring applications. Small drone-derived photogrammetric datasets (<5 km2) often extend field-scale observations and enable calibration and validation for satellite-based mapping. Applications usually require data over much larger areas or in remote areas such as the Arctic, yet large-area drone datasets are rare due to aviation regulations usually stipulating that missions adhere to within-visual-line-of-sight (VLOS) conditions. Terrain and vegetation canopy reconstruction based on longer-range drone missions requires evaluation to justify future beyond-visual-line-of-sight (BVLOS) data initiatives. This work analyzed BVLOS drone photogrammetric datasets for terrain and vegetation height applications along a forest-tundra ecotone (FTE) spanning 396 km in northern Canada. Specifically, we: 1) performed validation assessments of derived terrain models and canopy height models, and 2) investigated remote sensing applications supported by BVLOS data in a FTE experiencing the effects of climate change. The BVLOS data covered in excess of 550 km2, increasing conventional drone data coverage by two orders of magnitude. Elevation validation indicated that strong agreement with GNSS benchmarks, Airborne Laser Scanning (ALS) and VLOS drone data (0.15–0.19 m RMSE) is possible, and that vertical RMSEs <2x the image spatial resolution is achievable. To validate vegetation canopy height modelling capabilities, comparisons with NASA's Land, Vegetation, and Ice Sensor (LVIS) full-waveform ALS observations indicated satisfactory agreement for height metrics (R2 = 0.7 to 0.8, RMSEs <1.0 m). Canopies were reconstructed at fine spatial scales, which in turn supported a unique comparison of vegetation height distributions between six land-cover classes and ecoregions along the FTE, and identified discrepancies in how national and international canopy height models represented the FTE. Detected terrain subsidence, including retrogressive thaw slumping and ice-wedge degradation, illustrated how climate-driven permafrost thaw is modifying landscapes and placing infrastructure at increased risk, which requires intensive monitoring. These applications demonstrated how BVLOS-derived data enables broader scale assessments of regional vegetation structure and terrain changes across larger spatial extents than previously possible with VLOS drones. Mapping opportunities will arise in the environmental remote sensing discipline as drone systems are increasingly operated beyond visual range.

Estimating forest height and above-ground biomass in tropical forests using P-band TomoSAR and GEDI observations

ABSTRACT Knowledge about the vertical structure of forests, such as forest height, above-ground biomass (AGB), and the vertical biomass distribution is important for understanding carbon allocation, structural diversity, and succession and degradation dynamics in forest ecosystems. While the use of lidar (light detection and ranging) observations is well established to investigate the vertical structure of forests, the sensitivity of P-band synthetic aperture radar tomography (TomoSAR) observations to biomass and vertical forest structure is not yet well understood. Here we use lidar observations from NASA’s Global Ecosystem Dynamics Investigation (GEDI) to analyse the sensitivity of airborne P-band SAR tomography backscatter to forest height and AGB at two tropical forests in Lopé and Mondah, Gabon, Africa. We use GEDI observations to parametrize an empirical model for estimating forest height and we use a random forest model for estimating AGB from TomoSAR profiles. The validation with Land, Vegetation, and Ice Sensor (LVIS) airborne lidar data shows moderate performance for estimating forest height (RMSE = 8.2 m in Lopé and 9.8 m in Mondah) and moderate to good performance for total AGB (RMSE = 115.3 Mg/ha in Lopé and 117.8 Mg/ha in Mondah). We also estimated the vertical distribution of AGB using the corrected TomoSAR backscatter and compared it with AGB profiles derived from field observations in Mondah, which indicates potential to use TomoSAR observations for estimating vertical AGB distribution over tropical forests. However, our results demonstrate the need for targeted field observations of vertical biomass profiles in order to make full use of P-band TomoSAR to map the vertical structure of tropical forests.

Bridging the Gap: Comprehensive Boreal Forest Complexity Mapping through LVIS Full-Waveform LiDAR, Single-Year and Time Series Landsat Imagery

The extrapolation of forest structural attributes from LiDAR has traditionally been restricted to local or regional scales, hindering a thorough assessment of single-year versus time series predictors across expansive spatial scales. We extrapolated the vertical complexity captured by the Land, Vegetation, and Ice Sensor (LVIS) full-wave form LiDAR of boreal forests in the Alaska–Yukon–Northwest Territories region, utilizing predictors from Landsat images from 1989 to 2019. This included both single-year and long-term estimates of vegetation indices, alongside constant factors like terrain slope and location. Random forest regression models comparing the single-year and 15-year and 30-year time series models were applied. Additionally, the potential of estimating horizontal forest complexity from vertical complexity was explored using a moving window approach in the Kluane Valley. While the extended time series marginally enhanced model accuracy, a fine-tuned single-year model proved superior (R2 = 0.84, relative RRMSE = 8.4%). In estimating the horizontal complexity, the variance in a 5 × 5 moving window displayed the most promising results, aligning with traditional horizontal structure measures. Single-year Landsat models could potentially surpass time series models in predicting forest vertical complexity, with the added capability to estimate horizontal complexity using variance in a moving window approach.

A systematic evaluation of multi-resolution ICESat-2 ATL08 terrain and canopy heights in boreal forests

The launch of NASA's Ice, Cloud, And Elevation Satellite-2 (ICESat-2) in September 2018 provides the scientific community an opportunity to observe high-resolution and three-dimensional surface elevations with global coverage. ICESat-2's Land and Vegetation Height (ATL08) data product focuses on the along-track terrain and canopy heights observations at a 100 m × 11 m spatial resolution. This work expands on past ATL08 validation studies to assess a higher spatial resolution (30 m × 11 m) version of ATL08's height product. This new dataset enables higher resolution mapping and fusion with Landsat data, but has not previously been validated across large geographic extents. In this paper, we examine the accuracy of multi-resolution ICESat-2 ATL08 across North America boreal forests using Land, Vegetation, and Ice Sensor (LVIS), an airborne laser ranging system as reference datasets. Overall, strong agreements of terrain elevation and canopy height were found between ATL08 and LVIS at both 100 m × 11 m (RMSEterrain = 2.35 m; biasterrain = −0.17 m; RMSEcanopy = 4.17 m; biascanopy = 0.08 m) and 30 m × 11 m (RMSEterrain = 3.19 m; biasterrain = 0.49; RMSEcanopy = 4.75 m; biascanopy = 0.88 m) spatial resolutions. We found the accuracy of high-resolution terrain and canopy height measurements were constrained by sensor and external conditions during the time of data acquisition with lower uncertainties observed from samples along high-intensity ground tracks and with low topography/slope variabilities. Through this work, we provide insight into the use of multi-resolution ICESat-2 ATL08 for terrain and canopy heights characterization in northern forests. The results found in our study serve as a benchmark for end users to select high-quality ATL08 for a variety of scientific applications.

Gaussian process regression-based forest above ground biomass retrieval from simulated L-band NISAR data

Accurate mapping of forest above ground biomass (AGB) is essential for understanding changes in the rate of ecosystem processes such as biomass productivity, litter productivity, actual litter decomposition, and potential litter decomposition during secondary succession. They also play a vital role in evaluating forest carbon pools. This study presents a Matérn kernel-based Gaussian process regression (GPR) approach for biomass estimation integrating Synthetic Aperture Radar (SAR) backscatter intensities with LiDAR measurements. We use the backscatter intensities from five scenes of L-band Uninhabited Aerial Vehicle Synthetic Aperture Radar (UAVSAR) simulated NISAR data collected during the 2019 AM–PM NASA airborne campaign. The biomass map derived from LVIS (Land, Vegetation, and Ice Sensor) Lidar point clouds over the Lenoir landing site, Alabama, was used with these simulated NISAR data. We have utilized the GPR model to estimate the AGB of the entire forest alongside the major forest classes in the study area, namely deciduous, evergreen, and woody wetlands. To examine the dependency of the model on acquisition conditions, we calibrated and validated our proposed model utilizing scene combinations. The experiment shows that multiple-scene retrieval delivered improved AGB estimates compared to single-scene retrieval. We evaluated the efficacy of the GPR model for three AGB ranges, i.e., (i) 8to100Mgha−1, (ii) 8to230Mgha−1, and (iii) 8to470Mgha−1 at 20m, 30m, 50m and 100m spatial resolution, respectively. The results indicate that the RMSE incurred by the GPR model for all these AGB ranges seemed to reduce as we increased spatial extent or reduced spatial resolution from 20m to 100m. Further, we demonstrate the performance of the optimized GPR model to retrieve AGB within the biomass range of 8Mgha−1 to 100Mgha−1 for all the above-mentioned forest types. Finally, this research highlights the advantages of the Matérn kernel-based GPR model over other statistical regression models towards improved AGB mapping.

Fusion of optical, radar and waveform LiDAR observations for land cover classification

Land cover is an integral component for characterizing anthropogenic activity and promoting sustainable land use. Mapping distribution and coverage of land cover at broad spatiotemporal scales largely relies on classification of remotely sensed data. Although recently multi-source data fusion has been playing an increasingly active role in land cover classification, our intensive review of current studies shows that the integration of optical, synthetic aperture radar (SAR) and light detection and ranging (LiDAR) observations has not been thoroughly evaluated. In this research, we bridged this gap by i) summarizing related fusion studies and assessing their reported accuracy improvements, and ii) conducting our own case study where for the first time fusion of optical, radar and waveform LiDAR observations and the associated improvements in classification accuracy are assessed using data collected by spaceborne or appropriately simulated platforms in the LiDAR case. Multitemporal Landsat-5/Thematic Mapper (TM) and Advanced Land Observing Satellite-1/ Phased Array type L-band SAR (ALOS-1/PALSAR) imagery acquired in the Central New York (CNY) region close to the collection of airborne waveform LVIS (Land, Vegetation, and Ice Sensor) data were examined. Classification was conducted using a random forest algorithm and different feature sets in terms of sensor and seasonality as input variables. Results indicate that the combined spectral, scattering and vertical structural information provided the maximum discriminative capability among different land cover types, giving rise to the highest overall accuracy of 83% (2–19% and 9–35% superior to the two-sensor and single-sensor scenarios with overall accuracies of 64–81% and 48–74%, respectively). Greater improvement was achieved when combining multitemporal Landsat images with LVIS-derived canopy height metrics as opposed to PALSAR features, suggesting that LVIS contributed more useful thematic information complementary to spectral data and beneficial to the classification task, especially for vegetation classes. With the Global Ecosystem Dynamics Investigation (GEDI), a recently launched LiDAR instrument of similar properties to the LVIS sensor now operating onboard the International Space Station (ISS), it is our hope that this research will act as a literature summary and offer guidelines for further applications of multi-date and multi-type remotely sensed data fusion for improved land cover classification.

Gaussian Inflection Point Selection for LiDAR Hidden Echo Signal Decomposition

High-quality waveform decomposition, as one of the most critical cores of light detection and ranging (LiDAR) data processing, has become increasingly interesting. However, the current Gaussian decomposition method cannot handle the superimposed waveform with only one peak. Thus, this letter proposes a Gaussian inflection point selection method (GIPS). The method uses the number of inflection points (IPs) near the peak of the echo signal to judge the position of waveform half-width and selects an appropriate waveform half-width to iteratively decompose the echo signal to obtain Gaussian components, which are combined into a Gaussian model. Finally, a global Levenberg–Marquardt least-square algorithm (LM algorithm) is used to optimize the Gaussian model for fitting the echo signal. To verify the accuracy and effectiveness of GIPS, the experiments were conducted using land, vegetation and ice sensor (LVIS) data. The results show that the GIPS method can decompose complex LiDAR echo signals more correctly and efficiently than other methods do with an average <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$R^{2}$ </tex-math></inline-formula> of 0.9799.

The NASA AfriSAR campaign: Airborne SAR and lidar measurements of tropical forest structure and biomass in support of current and future space missions

In 2015 and 2016, the AfriSAR campaign was carried out as a collaborative effort among international space and National Park agencies (ESA, NASA, ONERA, DLR, ANPN and AGEOS) in support of the upcoming ESA BIOMASS, NASA-ISRO Synthetic Aperture Radar (NISAR) and NASA Global Ecosystem Dynamics Initiative (GEDI) missions. The NASA contribution to the campaign was conducted in 2016 with the NASA LVIS (Land Vegetation and Ice Sensor) Lidar, the NASA L-band UAVSAR (Uninhabited Aerial Vehicle Synthetic Aperture Radar). A central motivation for the AfriSAR deployment was the common AGBD estimation requirement for the three future spaceborne missions, the lack of sufficient airborne and ground calibration data covering the full range of ABGD in tropical forest systems, and the intercomparison and fusion of the technologies.During the campaign, over 7000 km2 of waveform Lidar data from LVIS and 30,000 km2 of UAVSAR data were collected over 10 key sites and transects. In addition, field measurements of forest structure and biomass were collected in sixteen 1-hectare sized plots. The campaign produced gridded Lidar canopy structure products, gridded aboveground biomass and associated uncertainties, Lidar based vegetation canopy cover profile products, Polarimetric Interferometric SAR and Tomographic SAR products and field measurements. Our results showcase the types of data products and scientific results expected from the spaceborne Lidar and SAR missions; we also expect that the AfriSAR campaign data will facilitate further analysis and use of waveform lidar and multiple baseline polarimetric SAR datasets for carbon cycle, biodiversity, water resources and more applications by the greater scientific community.

Airborne observations of arctic-boreal water surface elevations from AirSWOT Ka-Band InSAR and LVIS LiDAR

AirSWOT is an experimental airborne Ka-band radar interferometer developed by NASA-JPL as a validation instrument for the forthcoming NASA Surface Water and Ocean Topography (SWOT) satellite mission. In 2017, AirSWOT was deployed as part of the NASA Arctic Boreal Vulnerability Experiment (ABoVE) to map surface water elevations across Alaska and western Canada. The result is the most extensive known collection of near-nadir airborne Ka-band interferometric synthetic aperture radar (InSAR) data and derivative high-resolution (3.6 m pixel) digital elevation models to produce water surface elevation (WSE) maps. This research provides a synoptic assessment of the 2017 AirSWOT ABoVE dataset to quantify regional WSE errors relative to coincident in situ field surveys and LiDAR data acquired from the NASA Land, Vegetation, and Ice Sensor (LVIS) airborne platform. Results show that AirSWOT WSE data can penetrate cloud cover and have nearly twice the swath-width of LVIS as flown for ABoVE (3.2 km vs. 1.8 km nominal swath-width). Despite noise and biases, spatially averaged AirSWOT WSEs can be used to estimate sub-seasonal hydrologic variability, as confirmed with field GPS surveys and in situ pressure transducers. This analysis informs AirSWOT ABoVE data users of known sources of measurement error in the WSEs as influenced by radar parameters including incidence angle, magnitude, coherence, and elevation uncertainty. The analysis also provides recommended best practices for extracting information from the dataset by using filters for these four parameters. Improvements to data handing would significantly increase the accuracy and spatial coverage of future AirSWOT WSE data collections, aiding scientific surface water studies, and improving the platform’s capability as an airborne validation instrument for SWOT.

A LiDAR-Aided Multibaseline PolInSAR Method for Forest Height Estimation: With Emphasis on Dual-Baseline Selection

Polarimetric synthetic aperture radar interferometry (PolInSAR) and light detection and ranging (LiDAR) have their own respective advantages and disadvantages in extracting large-scale forest height. In this letter, we present an advanced approach to obtain forest canopy height by combining these two strategies. More specifically, the novelty of the proposed method focuses on a dual-baseline selection from multibaseline PolInSAR data, which ensures the robust performance of the forest height inversion by effectively improving the estimation of volume-only coherence. The dual-baseline selection can be regarded as a supervised classification problem. We consider support vector machine (SVM) as an appropriate classifier, and a small amount of sparse LiDAR samples within the coverage of the PolInSAR data (less than 1%) are chosen to assist with the training of the dual-baseline combination classification, which can be met by the current spaceborne LiDAR missions. Finally, we validate the proposed approach by airborne P-band synthetic aperture radar (SAR) data acquired by the F-SAR system and LiDAR data acquired by the National Aeronautics and Space Administration (NASA) Land, Vegetation, and Ice Sensor (LVIS) during the 2016 AfriSAR campaign. The estimation accuracy of the proposed method [ $R^{2} = 0.73$ , root-mean-square error (RMSE) = 3.17 m] is 25.24% higher than that of the existing SVM fusion approach devoted to single-baseline selection ( $R^{2} = 0.59$ , RMSE = 4.24 m).

Monitoring Tropical Forest Structure Using SAR Tomography at L- and P-Band

Our study aims to provide a comparison of the P- and L-band TomoSAR profiles, Land Vegetation and Ice Sensor (LVIS), and discrete return LiDAR to assess the ability for TomoSAR to monitor and estimate the tropical forest structure parameters for enhanced forest management and to support biomass missions. The comparison relies on the unique UAVSAR Jet propulsion Laboratory (JPL)/NASA L-band data, P-band data acquired by ONERA airborne system (SETHI), Small Footprint LiDAR (SFL), and NASA Land, Vegetation and Ice Sensor (LVIS) LiDAR datasets acquired in 2015 and 2016 in the frame of the AfriSAR campaign. Prior to multi-baseline data processing, a phase residual correction methodology based on phase calibration via phase center double localization has been implemented to improve the phase measurements and compensate for the phase perturbations, and disturbances originated from uncertainties in allocating flight trajectories. First, the vertical structure was estimated from L- and P-band corrected Tomography SAR data measurements, then compared with the canopy height model from SFL data. After that, the SAR and LiDAR three-dimensional (3D) datasets are compared and discussed at a qualitative basis at the region of interest. The L- and P-band’s performance for canopy penetration was assessed to determine the underlying ground locations. Additionally, the 3D records for each configuration were compared with their ability to derive forest vertical structure. Finally, the vertical structure extracted from the 3D radar reflectivity from L- and P-band are compared with SFL data, resulting in a root mean square error of 3.02 m and 3.68 m, where the coefficient of determination shows a value of 0.95 and 0.93 for P- and L-band, respectively. The results demonstrate that TomoSAR holds promise for a scientific basis in forest management activities.

Comparing Coincident Elevation and Freeboard From IceBridge and Five Different CryoSat-2 Retrackers

The airborne Operation IceBridge and spaceborne CryoSat-2 missions observe polar sea ice at different spatial and temporal scales as well as with different sensor suites. Comparison of data products from IceBridge and CryoSat-2 is complicated by the fact that they use different geophysical corrections: reference ellipsoid, geoid model, tide model, and atmospheric corrections to derive surface elevation and sea-ice freeboard. In this paper, we compare sea-ice surface elevation and freeboard using eight coincident CryoSat-2, Airborne Topographic Mapper (ATM), and Land, Vegetation, and Ice Sensor (LVIS) observations with direct IceBridge underflights of CryoSat-2 ground tracks. We apply identical geophysical corrections to CryoSat-2 and IceBridge data to eliminate elevation biases due to these differences and focus on differences due to retracker performance. The IceBridge ATM and LVIS elevation and freeboard and Snow Radar snow depth data sets are averaged to each CryoSat-2 footprint for comparison. With snow depth measurements, we are able to compare elevations and freeboards at the snow/ice interface for five different CryoSat-2 retrackers (ESA, GSFCv1, AWI, JPL, and GSFCv2) and IceBridge. The overall mean of freeboard differences between GSFCv2, ESA, AWI, JPL retrackers, and ATM are in agreement within 0.05 m. However, the five different CryoSat-2 retrackers show distinct differences in mean elevation over leads and over floes. This suggests that the physical interpretation of the different retrackers needs to be considered depending on usage, for example, elevations from CryoSat-2 retrackers need to be carefully calibrated before comparing with elevation from other satellites for long-term surface elevation trends.

The GEDI Simulator: A Large-Footprint Waveform Lidar Simulator for Calibration and Validation of Spaceborne Missions.

NASA's Global Ecosystem Dynamics Investigation (GEDI) is a spaceborne lidar mission which will produce near global (51.6°S to 51.6°N) maps of forest structure and above‐ground biomass density during its 2‐year mission. GEDI uses a waveform simulator for calibration of algorithms and assessing mission accuracy. This paper implements a waveform simulator, using the method proposed in Blair and Hofton (1999; https://doi.org/10.1029/1999GL010484), and builds upon that work by adding instrument noise and by validating simulated waveforms across a range of forest types, airborne laser scanning (ALS) instruments, and survey configurations. The simulator was validated by comparing waveform metrics derived from simulated waveforms against those derived from observed large‐footprint, full‐waveform lidar data from NASA's airborne Land, Vegetation, and Ice Sensor (LVIS). The simulator was found to produce waveform metrics with a mean bias of less than 0.22 m and a root‐mean‐square error of less than 5.7 m, as long as the ALS data had sufficient pulse density. The minimum pulse density required depended upon the instrument. Measurement errors due to instrument noise predicted by the simulator were within 1.5 m of those from observed waveforms and 70–85% of variance in measurement error was explained. Changing the ALS survey configuration had no significant impact on simulated metrics, suggesting that the ALS pulse density is a sufficient metric of simulator accuracy across the range of conditions and instruments tested. These results give confidence in the use of the simulator for the pre‐launch calibration and performance assessment of the GEDI mission.

L- and P-Band 3-D SAR Reflectivity Profiles Versus Lidar Waveforms: The AfriSAR Case

The aim of this paper is to compare L- and P-band vertical backscattering profiles estimated by means of synthetic aperture radar (SAR) tomography and full light detection and ranging (lidar) waveforms in terms of their ability to distinguish different tropical forest structure types. The comparison relies on the unique DLR F-SAR and NASA Land, Vegetation and Ice Sensor (LVIS) lidar datasets acquired in 2016 in the frame of the AfriSAR campaign. In particular, F-SAR and LVIS data over three different test sites complemented by plot field measurements are used. First, the SAR and lidar three-dimensional (3-D) datasets are compared and discussed on a qualitative basis. The ability to penetrate into and through the canopy down to the ground is assessed at L- and P-band in terms of both the ground-to-volume power ratio and the performance to estimate the location of the underlying ground. The effect of polarimetry on the visibility of the ground is discussed as well. Finally, the 3-D measurements for each configuration are compared with respect to their ability to derive physical forest structure descriptors. For this, vertical structure indices derived from the volume-only 3-D radar reflectivity at L- and P-band and from the LVIS profiles are compared against each other as well as against plot-derived indices.

Arctic Radiation-IceBridge Sea and Ice Experiment: The Arctic Radiant Energy System during the Critical Seasonal Ice Transition

Abstract The National Aeronautics and Space Administration (NASA)’s Arctic Radiation-IceBridge Sea and Ice Experiment (ARISE) acquired unique aircraft data on atmospheric radiation and sea ice properties during the critical late summer to autumn sea ice minimum and commencement of refreezing. The C-130 aircraft flew 15 missions over the Beaufort Sea between 4 and 24 September 2014. ARISE deployed a shortwave and longwave broadband radiometer (BBR) system from the Naval Research Laboratory; a Solar Spectral Flux Radiometer (SSFR) from the University of Colorado Boulder; the Spectrometer for Sky-Scanning, Sun-Tracking Atmospheric Research (4STAR) from the NASA Ames Research Center; cloud microprobes from the NASA Langley Research Center; and the Land, Vegetation and Ice Sensor (LVIS) laser altimeter system from the NASA Goddard Space Flight Center. These instruments sampled the radiant energy exchange between clouds and a variety of sea ice scenarios, including prior to and after refreezing began. The most critical and unique aspect of ARISE mission planning was to coordinate the flight tracks with NASA Cloud and the Earth’s Radiant Energy System (CERES) satellite sensor observations in such a way that satellite sensor angular dependence models and derived top-of-atmosphere fluxes could be validated against the aircraft data over large gridbox domains of order 100–200 km. This was accomplished over open ocean, over the marginal ice zone (MIZ), and over a region of heavy sea ice concentration, in cloudy and clear skies. ARISE data will be valuable to the community for providing better interpretation of satellite energy budget measurements in the Arctic and for process studies involving ice–cloud–atmosphere energy exchange during the sea ice transition period.

A linearly approximated iterative Gaussian decomposition method for waveform LiDAR processing

Full-waveform LiDAR (FWL) decomposition results often act as the basis for key LiDAR-derived products, for example canopy height, biomass and carbon pool estimation, leaf area index calculation and under canopy detection. To date, the prevailing method for FWL product creation is the Gaussian Decomposition (GD) based on a non-linear Levenberg-Marquardt (LM) optimization for Gaussian node parameter estimation. GD follows a “greedy” approach that may leave weak nodes undetected, merge multiple nodes into one or separate a noisy single node into multiple ones. In this manuscript, we propose an alternative decomposition method called Linearly Approximated Iterative Gaussian Decomposition (LAIGD method). The novelty of the LAIGD method is that it follows a multi-step “slow-and-steady” iterative structure, where new Gaussian nodes are quickly discovered and adjusted using a linear fitting technique before they are forwarded for a non-linear optimization. Two experiments were conducted, one using real full-waveform data from NASA’s land, vegetation, and ice sensor (LVIS) and another using synthetic data containing different number of nodes and degrees of overlap to assess performance in variable signal complexity. LVIS data revealed considerable improvements in RMSE (44.8% lower), RSE (56.3% lower) and rRMSE (74.3% lower) values compared to the benchmark GD method. These results were further confirmed with the synthetic data. Furthermore, the proposed multi-step method reduces execution times in half, an important consideration as there are plans for global coverage with the upcoming Global Ecosystem Dynamics Investigation LiDAR sensor on the International Space Station.

Assessment of NASA airborne laser altimetry data using ground-based GPS data near Summit Station, Greenland

Abstract. A series of NASA airborne lidars have been used in support of satellite laser altimetry missions. These airborne laser altimeters have been deployed for satellite instrument development, for spaceborne data validation, and to bridge the data gap between satellite missions. We used data from ground-based Global Positioning System (GPS) surveys of an 11 km long track near Summit Station, Greenland, to assess the surface–elevation bias and measurement precision of three airborne laser altimeters including the Airborne Topographic Mapper (ATM), the Land, Vegetation, and Ice Sensor (LVIS), and the Multiple Altimeter Beam Experimental Lidar (MABEL). Ground-based GPS data from the monthly ground-based traverses, which commenced in 2006, allowed for the assessment of nine airborne lidar surveys associated with ATM and LVIS between 2007 and 2016. Surface–elevation biases for these altimeters – over the flat, ice-sheet interior – are less than 0.12 m, while assessments of measurement precision are 0.09 m or better. Ground-based GPS positions determined both with and without differential post-processing techniques provided internally consistent solutions. Results from the analyses of ground-based and airborne data provide validation strategy guidance for the Ice, Cloud, and land Elevation Satellite 2 (ICESat-2) elevation and elevation-change data products.

Combining Tandem-X InSAR and simulated GEDI lidar observations for forest structure mapping

Abstract NASA's Global Ecosystem Dynamics Investigation (GEDI), to be deployed on the International Space Station (ISS) in 2018, will provide billions of measurements of ground elevation and forest vertical structure. GEDI will acquire data only along transects or tracks, with between-track spacing of about 500 m. To fill the gaps in between these tracks and potentially produce higher spatial resolution products, appropriate fusion strategies between GEDI observations and other spatially contiguous datasets should be explored. One source of global data on canopy structure comes from the TanDEM-X (TDX) mission, which uses the technique of Interferometric Synthetic Aperture Radar (InSAR) to estimate surface structure. The goal of this paper is to explore the fusion of GEDI data with TDX for canopy height retrievals. In particular we examined the improvement in TDX height retrievals from a widely used scattering model – the Random Volume over Ground (RVoG) model using ancillary topographic data from simulated GEDI observations of surface elevation. Our study site is a mountainous, mixed-temperate forest: Hubbard Brook Experimental Forest (HBEF). We started with a wall-to-wall lidar data set acquired by the Land Vegetation and Ice Sensor (LVIS) that provides a close analogue to anticipated GEDI waveforms. We derived a reference canopy height map and a reference bare earth digital terrain model (DTM) using LVIS. We next simulated GEDI ground tracks over HBEF for the nominal one-year period and extracted these observations from the reference DTM. A series of experiments were then conducted to examine the impact of ancillary topographic information. Using two different sets of TDX acquisitions, we compared height from RVoG respectively using no external DTM, the full LVIS DTM, and the DTM derived from simulated GEDI data against reference canopy heights at 90 m spatial resolution. With no external DTM to remove the ground phase, the RVoG model estimated heights with the best RMSE error (of the two TDX acquisitions dates) of 4.3 m and a bias of 2.5 m. Using the full LVIS DTM, results improved to 3.5 m RMSE and a bias of 1.3 m. Using the simulated GEDI DTM, the RMSE was 4.6 m with a bias of 1.8 m. The agreement between predicted and actual heights was good, ranging from an r2 of 0.39 (GEDI DTM) to 0.71 (p-value