Lacunar-canalicular Network Research Articles

Computational modeling based on confocal imaging predicts changes in osteocyte and dendrite shear stress due to canalicular loss with aging.

Exercise and physical activity exert mechanical loading on the bones which induces bone formation. However, the relationship between the osteocyte lacunar-canalicular morphology and mechanical stress experienced locally by osteocytes transducing signals for bone formation is not fully understood. In this study, we used computational modeling to predict the effect of canalicular density, the number of fluid inlets, and load direction on fluid flow shear stress (FFSS) and bone strains and how these might change following the microstructural deterioration of the lacunar-canalicular network that occurs with aging. Four distinct computational models were initially generated of osteocytes with either ten or eighteen dendrites using a fluid-structure interaction method with idealized geometries. Next, a young and a simulated aged osteocyte were developed from confocal images after FITC staining of the femur of a 4-month-old C57BL/6 mouse to estimate FFSS using a computational fluid dynamics approach. The models predicted higher fluid velocities in the canaliculi versus the lacunae. Comparison of idealized models with five versus one fluid inlet indicated that with four more inlets, one-half of the dendrites experienced FFSS greater than 0.8Pa, which has been associated with osteogenic responses. Confocal image-based models of real osteocytes indicated a six times higher ratio of canalicular to lacunar surface area in the young osteocyte model than the simulated aged model and the average FFSS in the young model (FFSS = 0.46Pa) was three times greater than the aged model (FFSS = 0.15Pa). Interestingly, the surface area with FFSS values above 0.8Pa was 23 times greater in the young versus the simulated aged model. These findings may explain the impaired mechano-responsiveness of osteocytes with aging.

Influence of Osteocyte Lacunar-Canalicular Morphology and Network Architecture on Osteocyte Mechanosensitivity.

The goal of this review is to summarize recent findings related to modifications in osteocyte lacunar and canalicular morphology due to physiological and pathological conditions. In addition, this review aims to outline how these modifications may influence the local mechanical environment of osteocytes and their mechanosensitivity. Reduction in lacunar density with age and increasing lacunar size with lactation are confirmed in multiple studies in human and murine bone. There is also evidence of a reduction in canalicular density, length, and branching, as well as increasing sphericity and smaller lacunae with aging and disease. However, while some studies have found modifications in lacunar density, size, shape, and orientation, as well as canalicular density, length, and size due to specific physiological and pathological conditions, others have not observed any differences. Recent finite element models provide insights into how observed modifications in the lacunar-canalicular network (lacunar and canalicular density) and lacunar-canalicular morphology (lacunar area/volume, shape, and orientation as well as canalicular diameter and length) may influence the fluid flow and local strains around the lacunar-canalicular network and modify the local mechanical environment of osteocytes. Modifications in the lacunar-canalicular network morphology may lead to significant changes in the strains received by osteocytes and may influence bone's response to mechanical stimulation as osteocytes are the primary mechanosensing bone cells. Further experimental and computational studies will continue to improve our understanding of the relationship between lacunar-canalicular network morphology and osteocyte mechanosensitivity.

Evaluating the Role of Canalicular Morphology and Perilacunar Region Properties on Local Mechanical Environment of Lacunar-Canalicular Network Using Finite Element Modeling.

Physiological and pathological processes such as aging, diseases, treatments, and lactation can alter lacunar-canalicular network (LCN) morphology and perilacunar region properties. These modifications can impact the mechanical environment of osteocytes which in turn can influence osteocyte mechanosensitivity and the remodeling process. In this study, we aim to evaluate how the modifications in the canalicular morphology, lacunar density, and the perilacunar region properties influence the local mechanical environment of LCN and the apparent bone properties using three-dimensional finite element (FE) modeling. The simulation results showed that a 50% reduction in perilacunar elastic modulus led to about 7% decrease in apparent elastic modulus of the bone. The increase in canalicular density, length, and diameter did not influence the strain amplification in the models but they increased the amount of highly strained bone around LCN. Change in lacunar density did not influence the strain amplification and the amount of highly strained regions on LCN surfaces. Reduction in perilacunar elastic modulus increased both the strain amplification and the volume of highly strained tissue around and on the surface of LCN. The FE models of LCN in this study can be utilized to quantify the influence of modifications in canalicular morphology, lacunar density, and perilacunar region properties on the apparent bone properties and the local mechanical environment of LCN. Although this is a numerical study with idealized models, it provides important information on how mechanical environment of osteocytes is influenced by the modifications in LCN morphology and perilacunar region properties due to physiological and pathological processes.

Water flow through bone: Neutron tomography reveals differences in water permeability between osteocytic and anosteocytic bone material

Vertebrate bones are made of a nanocomposite consisting of water, mineral and organics. Water helps bone material withstand mechanical stress and participates in sensation of external loads. Water diffusion across vertebrae of medaka (bone material lacking osteocytes) and zebrafish (bone material containing osteocytes) was compared using neutron tomography. Samples were measured both wet and following immersion in deuterated-water (D2O). By quantifying H+ exchange and mutual alignment with X-ray µCT scans, the amount of water expelled from complete vertebra was determined. The findings revealed that anosteocytic bone material is almost twice as amenable to D2O diffusion and H2O exchange, and that unexpectedly, far more water is retained in osteocytic zebrafish bone. Diffusion in osteocytic bones (only 33 % – 39 % water expelled) is therefore restricted as compared to anosteocytic bone (∼ 60 % of water expelled), presumably because water flow is confined to the lacunar-canalicular network (LCN) open-pore system. Histology and Raman spectroscopy showed that anosteocytic bone contains less proteoglycans than osteocytic bone. These findings identify a previously unknown functional difference between the two bone materials. Therefore, this study proposes that osteocytic bone retains water, aided by non-collagenous proteins, which contribute to its poroelastic mechano-transduction of water flow confined inside the LCN porosity.

Titanium nanotopography induces osteocyte lacunar-canalicular networks to strengthen osseointegration

Osteocyte network architecture is closely associated with bone turnover. The cellular mechanosensing system regulates osteocyte dendrite formation by enhancing focal adhesion. Therefore, titanium surface nanotopography might affect osteocyte network architecture and improve the peri-implant bone tissue quality, leading to strengthened osseointegration of bone-anchored implants. We aimed to investigate the effects of titanium nanosurfaces on the development of osteocyte lacunar-canalicular networks and osseointegration of dental implants. Alkaline etching created titanium nanosurfaces with anisotropically patterned dense nanospikes, superhydrophilicity, and hydroxyl groups. MLO-Y4 mouse osteocyte-like cells cultured on titanium nanosurfaces developed neuron-like dendrites with increased focal adhesion assembly and gap junctions. Maturation was promoted in osteocytes cultured on titanium nanosurfaces compared to cells cultured on machined or acid-etched micro-roughened titanium surfaces. Osteocytes cultured in type I three-dimensional collagen gels for seven days on nano-roughened titanium surfaces displayed well-developed interconnectivity with highly developed dendrites and gap junctions compared to the poor interconnectivity observed on the other titanium surfaces. Even if superhydrophilicity and hydroxyl groups were maintained, the loss of anisotropy-patterned nanospikes reduced expression of gap junction in osteocytes cultured on alkaline-etched titanium nanosurfaces. Four weeks after placing the titanium nanosurface implants in the upper jawbone of wild-type rats, osteocytes with numerous dendrites were found directly attached to the implant surface, forming well-developed lacunar-canalicular networks around the nano-roughened titanium implants. The osseointegration strength of the nano-roughened titanium implants was significantly higher than that of the micro-roughened titanium implants. These data indicate that titanium nanosurfaces promote osteocyte lacunar-canalicular network development via nanotopographical cues and strengthen osseointegration. Statement of significanceThe clinical stability of bone-anchoring implant devices is influenced by the bone quality. The osteocyte network potentially affects bone quality and is established by the three-dimensional (3D) connection of neuron-like dendrites of well-matured osteocytes within the bone matrix. No biomaterials are known to regulate formation of the osteocyte network. The present study provides the first demonstration that titanium nanosurfaces with nanospikes created by alkali-etching treatment enhance the 3D formation of osteocyte networks by promoting osteocyte dendrite formation and maturation by nanotopographic cues, leading to strengthened osseointegration of titanium implants. Osteocytes attached to the titanium nanosurfaces via numerous cellular projections. The success of osteocyte regulation by nanotechnology paves the way for development of epoch-making technologies to control bone quality.

Bone regeneration after marginal bone resection in two-stage treatment of chronic long bone infection - a combined histopathological and clinical pilot study

IntroductionIn chronic bone infection, marginal bone resection avoids large and difficult to reconstruct bone defects. However, there is still a lack of knowledge on bone regeneration during chronic bone infection and bone healing capability after marginal bone resection. Therefore, the purpose of this study was to investigate the clinical and histopathological outcomes after marginal bone resection in chronic long bone infection. We hypothesized that there is a regenerative bone healing potential after marginal bone resection that results in an acceptable clinical outcome and improved pathohistological bone healing parameters during treatment. Materials and methodsNine patients were treated for chronic bone infections in a two-stage manner with marginal bone resection of the infected area and the placement of an antibiotic-loaded polymethyl methacrylate (PMMA) spacer at stage one followed by bone reconstruction at stage two combined with systemic antibiotic therapy. Comparable bone samples were harvested at the border region between vital and necrotic bone area during stage one and the identical location during stage two. Control bone samples were harvested from five healthy patients without bone infection. Clinical outcome in terms of infection eradication and bone consolidation were assessed. The phenotypic changes of osteocyte and morphological changes of lacunar-canalicular network were investigated by histological and immunohistochemical staining between the two observation periods. Furthermore, expression levels of major bone formation and resorption markers were investigated by immunohistochemical and tartrate-resistant acid phosphatase (TRAP) staining. ResultsThe clinical results with a follow-up of 12.9 months showed that eight of nine patients (88.9%) achieved bone consolidation after a planned two-stage procedure of marginal resection of necrotic bone and consecutive reconstruction. In four of the nine patients (44.4%), additional marginal debridements after stage two had to be performed. After marginal resection at stage one, the improved bone formation ability at stage two was demonstrated by significantly lower percentage of empty lacunae, significantly more mature osteocytes and higher BMP-2 positive cell density, whereas decreased resorption was indicated by significantly lower osteoclast density and RANKL/OPG ratio. In patients requiring additional debridement compared to patients without additional debridements, a significantly higher percentage of empty lacunae was found at stage one. ConclusionMarginal bone resection combined with local and systemic antibiotic therapy is a feasible treatment option to avoid large bone defects as bone from the marginal resection area seems to have good regenerative potential. Despite a high revision rate of 44.4%, this technique avoids large bone resection and revisions can be done by further marginal debridements.

An in silico model for woven bone adaptation to heavy loading conditions in murine tibia.

Existing in silico models for lamellar bone adaptation to mechanical loading are unsuitable for predicting woven bone growth. This anomaly is due to the difference in mechanobiology of the woven bone with respect to that of the lamellar bone. The present study is aimed at developing an in silico bone-adaptation model for woven bone at cellular and tissue levels. The diffusion of Ca2+ ions reaching lining cells from the osteocytic network and the bone cortex in response to a mechanical loading on the cortical bone has been considered as a stimulus. The diffusion of ions within osteocytic network has been computed with a lacunar-canalicular network (LCN) in which bone cells are uniformly arranged. Strain energy density is assumed to regulate ion flow within the network when the induced normal strain is above a threshold level. If the induced strain exceeds another higher threshold level, then the strain with a power constant is additionally assumed to regulate the stimulus. The intracellular flow of Ca2+ ions within the LCN has been simulated using Fick's laws of diffusion, using a finite element method. The ion diffusion from bone cortex to vesicles has been formulated as a normal strain with a power constant. The stimuli reaching the surface cells are assumed to form the new bone. The mathematical model closely predicts woven bone growth in mouse and rat tibia for various in vivo loading conditions. This model is the first to predict woven bone growth at tissue and cellular levels in response to heavy mechanical loading.

Long-term mechanical loading is required for the formation of 3D bioprinted functional osteocyte bone organoids

Mechanical loading has been shown to influence various osteogenic responses of bone-derived cells and bone formation in vivo. However, the influence of mechanical stimulation on the formation of bone organoid in vitro is not clearly understood. Here, three-dimensional (3D) bioprinted human mesenchymal stem cells-laden graphene oxide composite scaffolds were cultured in a novel cyclic-loading bioreactors for up to 56 d. Our results showed that mechanical loading from day 1 (ML01) significantly increased organoid mineral density, organoid stiffness, and osteoblast differentiation compared with non-loading and mechanical loading from day 21. Importantly, ML01 stimulated collagen I maturation, osteocyte differentiation, lacunar-canalicular network formation and YAP expression on day 56. These finding are the first to reveal that long-term mechanical loading is required for the formation of 3D bioprinted functional osteocyte bone organoids. Such 3D bone organoids may serve as a human-specific alternative to animal testing for the study of bone pathophysiology and drug screening.

Effects of Osteocyte Shape on Fluid Flow and Fluid Shear Stress of the Loaded Bone.

This study was conducted to better understand the specific behavior of the intraosseous fluid flow. We calculated the number and distribution of bone canaliculi around the osteocytes based on the varying shapes of osteocytes. We then used these calculated parameters and other bone microstructure data to estimate the anisotropy permeability of the lacunar-canalicular network. Poroelastic finite element models of the osteon were established, and the influence of the osteocyte shape on the fluid flow properties of osteons under an axial displacement load was analyzed. Two types of boundary conditions (BC) that might occur in physiological environments were considered on the cement line of the osteon. BC1 allows free fluid passage from the outer elastic restraint boundary, and BC2 is impermeable and allows no free fluid passage from outer displacement constrained boundary. They both have the same inner boundary conditions that allow fluid to pass through. Changes in the osteocyte shape altered the maximum value of pressure gradient (PG), pore pressure (PP), fluid velocity (FV), and fluid shear stress (FSS) relative to the reference model (spherical osteocytes). The maximum PG, PP, FV, and FSS in BC2 were nearly 100% larger than those in BC1, respectively. It is found that the BC1 was closer to the real physiological environment. The fluid flow along different directions in the elongated osteocyte model was more evident than that in other models, which may have been due to the large difference in permeability along different directions. Changes in osteocyte shape significantly affect the degrees of anisotropy of fluid flow and porous media of the osteon. The model presented in this study can accurately quantify fluid flow in the lacunar-canalicular network.

Temporal changes in cortical microporosity during estrogen deficiency associated with perilacunar resorption and osteocyte apoptosis: A pilot study

Osteocytes can actively regulate bone microporosity, through either perilacunar resorption or micropetrosis following apoptosis. Osteocyte apoptosis is more prevalent in estrogen deficiency and changes in the lacunar-canalicular network of osteocytes have been reported. Temporal changes in bone mineralisation and osteocytes cellular strains occur, which might be associated with osteocyte-driven microporosity changes, although time dependant changes in bone microporosity are not yet fully understood. In this pilot study we conducted micro-CT analysis, backscatter electron imaging and histological analysis of femoral cortical bone form an ovariectomized rat model of osteoporosis to investigate whether estrogen deficiency causes temporal changes in lacunar and vascular porosity. We also assessed MMP14 expression, lacunar occupancy and mineral infilling, as indicators of perilacunar resorption and micropetrosis. We report temporal changes in cortical microporosity in estrogen deficiency. Specifically, canalicular and vascular porosity initially increased (4 weeks post-OVX), coinciding with the period of rapid bone loss, whereas in the longer term (14 weeks post-OVX) lacunar and canalicular diameter decreased. Interestingly, these changes coincided with an increased prevalence of empty lacunae and osteocyte lacunae were observed to be more circular with a mineralised border around the lacunar space. In addition we report an increase in MMP14+ osteocytes, which also suggests active matrix degradation by these cells. Together these results provide an insight into the temporal changes in cortical microporosity during estrogen deficiency and suggest the likelihood of occurrence of both perilacunar resorption and osteocyte apoptosis leading to micropetrosis. We propose that microporosity changes arise due to processes driven by distinct populations of osteocytes, which are either actively resorbing their matrix or have undergone apoptosis and are infilling lacunae by micropetrosis.

Interconnectivity Explains High Canalicular Network Robustness between Neighboring Osteocyte Lacunae in Human Bone

Osteocytes are the most frequent bone cells connected with each other through cell processes within tiny tubular‐shaped canaliculi. The so‐called osteocyte lacunar‐canalicular network (LCN) plays a crucial role in bone remodeling and mineral homeostasis. Given the critical nature of these functions, it is herein hypothesized that the LCN must be structurally “overengineered” to provide network resilience. This hypothesis is tested by characterizing canalicular networks in human bone at the fundamental “building‐block” level of LCN formed by two adjacent osteocytes. As the hierarchical micro‐ and macroscale structure of bone is influenced by anatomical location, subjected loads, and growth rate, three distinct tissue types are studied. These include femur, jaw, and heterotopic ossification (HO), a rapidly forming mineralized tissue found in soft tissue compartments following severe trauma. It is found that the LCNs at the fundamental level are composed of hundreds of canalicular segments but of only few separated groups of linked canaliculi (canalicular clusters), resulting in a strongly pronounced interconnectivity. Fluid permeability simulations on intact and artificially altered LCN suggest that the function of the LCN is not only to optimize rapid and efficient access to bone mineral, but also to maintain high permeability when inevitable local interruption of canaliculi occurs.

Tunnels in the rock: Dynamics of osteocyte morphogenesis.

Osteocytes are dynamic, bone matrix-remodeling cells that form an intricate network of interconnected projections through the bone matrix, called the lacunar-canalicular system. Osteocytes are the dominant mechanosensory cells in bone and their mechanosensory and mechanotransductive functions follow their morphological form. During osteocytogenesis and development of the osteocyte lacunar-canalicular network, osteocytes must dramatically remodel both their cytoskeleton and their extracellular matrix. In this review, we summarize our current understanding of the mechanisms that govern osteocyte differentiation, cytoskeletal morphogenesis, mechanotransduction, and matrix remodeling. We postulate that the physiologic activation of matrix remodeling in adult osteocytes, known as perilacunar/canalicular remodeling (PLR) represents a re-activation of the developmental program by which the osteocyte network is first established. While much of osteocyte biology remains unclear, new tools and approaches make the present moment a particularly fruitful and exciting time to study the development of these remarkable cells.

Altered canalicular remodeling associated with femur fracture in mice.

We previously showed that femur fracture in mice caused a reduction in bone volume at distant skeletal sites within 2 weeks post-fracture. Osteocytes also have the ability to remodel their surrounding bone matrix through perilacunar/canalicular remodeling (PLR). If PLR is altered systemically following fracture, this could affect bone mechanical properties and increase fracture risk at all skeletal sites. In this study, we investigated whether lacunar-canalicular microstructure and the rate of PLR are altered in the contralateral limb following femoral fracture in mice. We hypothesized that femoral fracture would accelerate PLR by 2 weeks postfracture, followed by partial recovery by 4 weeks. We used histological evaluation and high-resolution microcomputed tomography to quantify the morphology of the lacunar-canalicular network at the contralateral tibia, and we used quantitative real-time polymerase chain reaction (RT-PCR) and RNA-seq to measure the expression of PLR-associated genes in the contralateral femur. We found that at both 2 and 4 weeks postfracture, canalicular width was significantly increased by 18.6% and 16.6%, respectively, in fractured mice relative to unfractured controls. At 3 days and 4 weeks post-fracture, we observed downregulation of PLR-associated genes; RNA-seq analysis at 3 days post-fracture showed a deceleration of bone formation and mineralization in the contralateral limb. These data demonstrate notable canalicular changes following fracture that could affect bone mechanical properties. These findings expand our understanding of systemic effects of fracture and how biological and structural changes at distant skeletal sites may contribute to increased fracture risk following an acute injury.

An Early Myeloma Bone Disease Model in Skeletally Mature Mice as a Platform for Biomaterial Characterization of the Extracellular Matrix.

Multiple myeloma (MM) bone disease is characterized by osteolytic bone tissue destruction resulting in bone pain, fractures, vertebral collapse, and spinal cord compression in patients. Upon initial diagnosis of MM, almost 80% of patients suffer from bone disease. Earlier diagnosis and intervention in MM bone disease would potentially improve treatment outcome and patient survival. New preclinical models are needed for developing novel diagnostic markers of bone structural changes as early as possible in the disease course. Here, we report a proof-of-concept, syngeneic, intrafemoral MOPC315.BM MM murine model in skeletally mature BALB/c mice for detection and characterization of very early changes in the extracellular matrix (ECM) of MM-injected animals. Bioluminescence imaging (BLI) in vivo confirmed myeloma engraftment in 100% of the animals with high osteoclast activity within 21 days after tumor cell inoculation. Early signs of aggressive bone turnover were observed on the outer bone surfaces by high-resolution microcomputed tomography (microCT). Synchrotron phase contrast-enhanced microcomputer tomography (PCE-CT) revealed very local microarchitecture differences highlighting numerous active sites of erosion and new bone at the micrometer scale. Correlative backscattered electron imaging (BSE) and confocal laser scanning microscopy allowed direct comparison of mineralized and nonmineralized matrix changes in the cortical bone. The osteocyte lacunar-canalicular network (OLCN) architecture was disorganized, and irregular-shaped osteocyte lacunae were observed in MM-injected bones after 21 days. Our model provides a potential platform to further evaluate pathological MM bone lesion development at the micro- and ultrastructural levels. These promising results make it possible to combine material science and pharmacological investigations that may improve early detection and treatment of MM bone disease.

A Chemo-poroelastic Analysis of Mechanically Induced Fluid and Solute Transport in an Osteonal Cortical Bone.

It is well known that transport of nutrients and wastes as solute in bone fluid plays an important role in bone remodeling and damage healing. This work presents a chemo-poroelastic model for fluid and solute transport in the lacunar-canalicular network of an osteonal cortical bone under cyclic axial mechanical loading or vascular pressure. Analytical solutions are obtained for the pore fluid pressure, and fluid and solute velocities. Numerical results for fluid and calcium transport indicate that under a cyclic stress of 20MPa, the magnitudes of the fluid and calcium velocities increase with an increase in the loading frequency for the frequency range considered (≤ 3Hz) and peak at the inner boundary. The peak magnitude of calcium velocity reaches 18.9μm/s for an osteon with a permeability of 1.5 × 10-19 m2 under a 3Hz loading frequency. The magnitude of calcium velocity under a vascular pressure of 50mmHg is found to be two orders of magnitude smaller than that under the mechanical load. These results have the potential to be important in understanding fundamental aspects of cortical bone remodeling as transport characteristics of calcium and other nutrients at the osteon scale influence bone metabolism.

Importance of osteocyte-mediated regulation of bone remodelling in inflammatory bone disease.

Although the impact of osteoblast-osteoclast crosstalk in bone remodelling has been intensively studied, the importance of osteocytes, descendants of osteoblasts, in this process has for a long time been neglected. During their embedding phase, osteocytes undergo considerable phenotypic transformation, from a cuboidal, highly metabolically active osteoblast secreting extracellular matrix to a small, stellate, quiescent osteocyte with numerous long dendrites. Osteocytes are encysted in cavities (lacunae) and their dendritic extensions are located in tunnels (canaliculi) forming a remarkable, highly branched, lacunar-canalicular signalling network that spans the entire bone matrix. Osteocytes and their dendrites can communicate directly with each other and through the release of effector proteins such as sclerostin and nuclear factor κB ligand (RANKL), influence osteoblast and osteoclast formation. This allows osteocytes embedded within the bone matrix to communicate and coordinate activity of cells on the bone surface to adapt to mechanical needs and hormonal changes. Besides their importance in sustaining physiological bone homeostasis, accumulating evidence suggests that dysregulated osteocyte function and alterations in the osteocyte lacunar-canalicular network structure are characteristics of skeletal diseases. This review highlights some aspects of osteocyte communication with osteoclasts and mesenchymal stromal cells, the importance of blood vessel-osteocyte interaction and describes central functions of these cells in rheumatoid arthritis, osteoarthritis, osteomyelitis and osteoporosis. Within the last decade new technologies and tools have facilitated the study of osteocyte biology and the search for therapeutic targets to address bone fragility in the near future.

Numerical analysis of the flow field in the lacunar-canalicular system under different magnitudes of gravity.

Irreversible osteoporosis may occur in astronauts during long-term space flight. The flow field of tissue fluid in the lacunar-canalicular system (LCS) of osteon and the mechanical response of osteocytes to the flow field under different gravity fields were studied by numerical simulation. This study is expected to explain how the decrease in liquid transmission within microgravity can be a cause of osteoporosis in astronauts from the perspective of biomechanics using a fundamental research approach. A 3D axisymmetric fluid-solid coupling finite element model of an osteon with a two-stage pore structure (Haversian canals and lacunar-canalicular network) and osteocytes was established. The model compared the influence of differences in pulsating pressure of arterioles in Haversian canal, from 33mmHg to 45mmHg within a microgravity field (0g), Earth's gravity field (1g), and a high G gravitational fields (2-8g). The liquid flow velocity in the LCS within a microgravity field was less than that within a normal gravitational field, and the flow velocity increased with gravitational acceleration. There was a significant liquid pressure gradient in the osteocytes within a normal and higher gravitational field compared with in microgravity. A reduction in the fluid flow velocity and fluid shear stress on osteocytes in different zones in microgravity compared with Earth's gravitational field. For these reasons, possibly causing a decrease in mechanical conduction and biochemical function, even cell death, leads to increased osteoclast activity, eventually causing the loss of a large quantity of bone. Graphical abstract A 3D axisymmetric fluid-solid coupling finite element model of an osteon with a two-stage pore structure was established. The model compared the influence of magnitudes of gravity on liquid transmission in LCS and mechanical response of osteocytes. The mean flow velocity of liquid in various layers (shallow, middle, and deep) increased linearly as acceleration due to gravity increased, and there was a significant liquid pressure gradient in osteocytes within a normal gravitational field compared with in microgravity. In microgravity environment, the osteocytes were unable to experience the pressure difference compared to that of Earth, possibly causing a decrease in mechanical conduction and biochemical function, even cell death, leading to increased osteoclast activity, eventually causing the loss of a large quantity of bone.

The contribution of the pericanalicular matrix to mineral content in human osteonal bone.

The osteocyte lacunar-canalicular network (LCN) penetrates bone and houses the osteocytes and their processes. Despite its rather low volume fraction, the LCN represents an outstanding large surface that is possibly used by the osteocytes to interact with the surrounding mineralized bone matrix thereby contributing to mineral homeostasis. The aim of this study was to quantitatively describe such contributions by spatially correlating the local density of the LCN with the mineral content at the same location in micrometer-sized volume elements in human osteons. For this purpose, 65 osteons from the femur midshaft from healthy adults (n = 4) and children (n = 2) were structurally characterized with two different techniques. The 3D structure of the LCN in the osteons was imaged with confocal laser scanning microscopy after staining the bone samples with rhodamine. Subsequent image analysis provided the canalicular length density, i.e. the total length of the canaliculi per unit volume (μm/μm3). Quantitative information on the mineral content (wt%Ca) from the identical regions was obtained using quantitative backscattered electron imaging. As the LCN-porosity lowers the mineral content, a negative correlation between Ca content and network density was expected. Calculations predict a reduction of around -0.97 fmol Ca per μm of network. However, the experiment revealed for 62 out of 65 osteons a positive correlation resulting in an average additional Ca loading of +1.15 fmol per μm of canalicular network, i.e. an accumulation of mineral has occurred at dense network regions. We hypothesize that this accumulation happens in the close vicinity of canaliculi forming mineral reservoirs that can be utilized by osteocytes. Significant differences found between individuals indicate that the extent of mineral loading of the reservoir zone reflects an important parameter for mineral homeostasis.

The disuse effect on canal network structure and oxygen supply in the cortical bones of rats.

In this study, based on the measurements of intracortical vascular canal structure, we investigated the disuse effect on local O2 supply in the cortical bones of growing rats. Hindlimb disuse was produced by unilateral sciatic neurectomy (SN) at 4weeks age. The canal network structures within tibial cortical bone were evaluated in 8- and 12-week-old rats undergoing SN or no treatment (control) by synchrotron radiation micro-CT. Additionally, we developed an intracortical network model by combining the imaged-based canal network with a bone matrix containing theoretical lacunar-canalicular network, and determined the distribution of O2 concentration in bone tissue numerically. In the control bone, canal network was reduced with growth, resulting in decreased blood flow and averaged O2 concentration and increased spatial heterogeneity in tissue O2 concentration. Disuse reduced the canal network, leading to a lower flow rate, lower average O2 concentration and higher heterogeneity of O2 concentrations. However, the rarefaction of the canal network with growth was smaller under the disuse condition, and accordingly, the flow rate, the average O2 concentration and the heterogeneity of O2 concentrations remained stable. In particular, although the fraction of the canal volume was smaller, the densities of canal segments and bifurcation points under disuse condition tended to be higher than those of the control bone. The heterogeneity of O2 concentration was lower. Our results indicated that the disuse may lead to more uniformity in the canal network structure and thereby uniform O2, possibly contributing to O2 supply efficiency.

Confocal laser scanning microscopy-apowerful tool in bone research.

The confocal laser scanning microscope (CLSM) enables the collection of images picturing selected planes in depth of thick samples, thus giving 3D information while keeping the sample intact. In this article we give an overview of our CLSM applications in bone research: (i)the characterization of osteoblasts and osteoclasts properties in cell biology, (ii)the visualization of the three dimensional (3D) osteocyte lacunar canalicular network in undemineralized plastic-embedded bone samples, (iii)the observation of tetracycline labels in bone biopsy samples from patients in combination with information on the mineralization density from quantitative backscatter electron imaging, which enables the time course of mineral accumulation in newly formed bone to be followed, (iv)the precise measurement of the thickness of thin ground bone sections, aprerequisite for the mapping of local mechanical properties by scanning acoustic microscopy.