Knee Joint Biomechanics Research Articles

Biomechanics of the Human Knee Joint in Maximum Voluntary Isometric Flexion: Study of Changes in Applied Moment, Agonist-Antagonist Participations, Joint Center, and Flexion Angle.

Estimation of the knee joint strength by maximum voluntary isometric contraction (MVIC) is a common practice to assess strength, coordination, safety to return to work or engage in sports after an injury, and to evaluate the efficacy of treatment modalities and rehabilitation strategies. In this study, we utilize a previously validated coupled finite element-musculoskeletal model of the lower extremity to explore the sensitivity of output measures (posterior cruciate ligament [PCL]/muscle/contact forces and passive moments) in knee MVIC flexion exercises at seated position. To do so, at three knee flexion angles (KFA), input measures (resistance moment and contribution moments of quadriceps and gastrocnemii) were varied at four levels each using the Taguchi design of experiment. Our findings reveal significant increases in PCL forces with KFA (p < 0.01), net MVIC moment (p < 0.01), and resistance moment of quadriceps (p < 0.01). In contrast, they drop at larger activity in gastrocnemii (p < 0.01). Tibiofemoral (TF) contact forces increase with the net MVIC moment (p < 0.01). The passive knee flexion moment, while highly dependent on the location at which computed, also increases with the net MVIC moment (p < 0.01). Changes in KFA, MVIC moment, and proportions thereof carried by quadriceps and/or gastrocnemii substantially affect biomechanics of the joint. Compared with level walking and stair ascent, slightly larger contact forces/stresses and much greater PCL forces are computed. This study improves our understanding of the knee joint behavior during MVIC in effective evaluation and rehabilitation interventions. Besides, it emphasizes the importance of positioning the joint center in model studies.

Partial weight-bearing and range of motion limitation significantly reduce the loads at medial meniscus posterior root repair sutures in a cadaveric biomechanical model.

The aim of this study was to investigate the influence of medial meniscus posterior root avulsion (MMPRA) before and after surgical treatment on the biomechanics of the knee joint, including suture repair forces during daily and crutch-assisted gait movements. MMPRA were investigated in eight human cadaver knee joint specimens by a dynamic knee joint simulator with daily (normal gait, gait with additional rotational movement, standing up, sitting down) and rehabilitation-associated movements (crutch-assisted gait with limited flexion range of motion [30°] and 30% [toe-touch weight-bearing, TTWB] and 50% of body weight [partial weight-bearing, PWB]) with simulated physiologic muscle forces. Each specimen was tested in intact, torn and repaired (transtibial suture) state. The biomechanical parameters were: medial mean contact pressure and area, knee joint kinematics, medial displacement of the posterior meniscus horn and loading on the anchoring suture. Significant reduction of the contact area due to the avulsion was observed in all movements except for PWB and sitting down. MMPRA repair significantly increased the contact areas during all movements, bringing them to levels statistically indistinguishable from the initial state. MMPRA resulted in a medial displacement up to 12.8 mm (sitting down) and could be reattached with a residual displacement ranging from 0.7 mm (PWB) to 5.7 mm (standing up), all significantly (p < 0.001) reduced compared to the torn state. The mean peak anchoring suture load increased from TTWB (77 N), PWB (91 N) to normal gait (194 N), gait rotation (207 N), sitting (201 N; p < 0.01) and to standing up (232 N; p = 0.03). Surgical treatment of MMPRA allows restoration of physiological knee joint biomechanics. Crutch-assisted movements reduce the loading of the repair suture, thus likewise the risk for failure. From a biomechanical point of view, crutch-assisted movements are recommended for the early rehabilitation phase after MMPRA repair. Level V.

Sex Differences in Ambulatory Biomechanics: A Meta-Analysis Providinga Mechanistic Insight into Knee Osteoarthritis.

Females typically present with a higher prevalence of knee osteoarthritis (KOA), and such a higher prevalence may be due to unique knee biomechanics during walking. However, the sex-dependent ambulatory mechanics has been yet to be clarified. To address this critical knowledge gap, this study implemented a series of computational approaches (1) to identify sex-related knee joint biomechanics during ambulation in persons with KOA and (2) to compare these biomechanical measures between individuals with vs. without KOA, stratified by sex. We searched five electronic databases for studies reporting sex-specific knee biomechanics in persons with and/or without KOA. Summary estimates were computed using random-effects meta-analysis and stratified by sex. The systematic review identified eighteen studies (308 males and 383 females with KOA; 740 males and 995 females without KOA). A series of meta-analyses identified female-specific knee biomechanics in a disease-dependent manner. Females with KOA had lower first peak knee adduction moment and peak knee adduction compared to male counterparts. On the other hand, healthy females had lower peak knee flexion moment than male counterparts. Effect estimate in each meta-analysis display poor quality of evidence according to the GRADE approach. The current study is the first to consider sex as a biological variable into ambulatory mechanics in the development of KOA. We discovered that sex-dependent alterations in knee biomechanics is a function of the presence of KOA, indicating that KOA disease may be a driver of the sex-dependent biomechanical alterations or vice versa. Although no strong conclusion can be drawn because of the low quality of evidence, these findings provide new insight into the sex differences in ambulatory knee biomechanics and progression of KOA.

Selective voluntary motor control influences knee joint torque, work and power in children with spastic cerebral palsy

BackgroundChildren with spastic cerebral palsy (CP) have damage to the corticospinal tracts that are responsible for selective motor control (SMC). Force, velocity and timing of joint movement are related biomechanical features controlled by the corticospinal tracts (CSTs) that are important for skilled movement. Research QuestionDoes SMC influence knee joint biomechanics in spastic CP? Methods: In this prospective study, relationships between SMC and knee biomechanics (peak torque, total work, average power) across a range of velocities (0–300 deg/s) were assessed using an isokinetic dynamometer in 23 children with spastic CP. SMC was assessed using Selective Control Assessment of the Lower Extremity (SCALE). Logistic and linear regression models were used to evaluate relationships between SCALE and biomechanical measures. ResultsThe ability to produce knee torque diminished with increasing velocity for both Low (0–4 points) and High (5–10 points) SCALE limb score groups (p < 0.01). More knees in the High group produced extension torque at 300 deg/s (p < 0.05) and flexion torque at 30, 90,180, 240 and 300 deg/s (p < 0.05). The ability to produce torque markedly decreased above 180 deg/s for Low group flexion. For knees that produced torque, significant positive correlations between SCALE limb scores and joint torque (0 and 120 deg/s), work (120 deg/s) and power (120 deg/s) were found (p < 0.05). Greater knee torque, work and power for the High group was found for the extensors at most velocities and the flexors for up to 120 deg/s (p < 0.05). Few Low group participants generated knee flexor torque above 120 deg/s limiting comparisons. SignificanceBiomechanical impairments found for children with low SMC are concerning as skilled movements during gait, play and sport activities occur at high velocities. Differences in SMC should be considered when designing individualized assessments and interventions.

Unveiling the mechanical role of radial fibers in meniscal tissue: Toward structural biomimetics

The meniscus tissue is crucial for knee joint biomechanics and is frequently susceptible to injuries resulting in early-onset osteoarthritis. Consequently, the need for meniscal substitutes spurs ongoing development. The meniscus is a composite tissue reinforced with circumferential and radial collagenous fibers; the mechanical role of the latter has yet to be fully unveiled.Here, we investigated the role of radial fibers using a synergistic methodology combining meniscal tissue structure imaging, a computational knee joint model, and the fabrication of simple biomimetic composite laminates. These laminates mimic the basic structural units of the meniscus, utilizing longitudinal and transverse fibers equivalent to the circumferential and radial fibers in meniscal tissue.In the computational model, the absence of radial fibers resulted in stress concentration within the meniscus matrix and up to 800 % greater area at the same stress level. Furthermore, the contact pressure on the tibial cartilage increased drastically, affecting up to 322 % larger areas. Conversely, in models with radial fibers, we observed up to 25 % lower peak contact pressures and width changes of less than 0.1 %. Correspondingly, biomimetic composite laminates containing transverse fibers exhibited minor transverse deformations and smaller Poisson's ratios. They demonstrated structural shielding ability, maintaining their mechanical performance with the reduced amount of fibers in the loading direction, similar to the ability of the torn meniscus to carry and transfer loads to some extent. These results indicate that radial fibers are essential to distribute contact pressure and tensile stresses and prevent excessive deformations, suggesting the importance of incorporating them in novel designs of meniscal substitutes. Statement of significanceThe organization of the collagen fibers in the meniscus tissue is crucial to its biomechanical function. Radially oriented fibers are an important structural element of the meniscus and greatly affect its mechanical behavior. However, despite their importance to the meniscus mechanical function, radially oriented fibers receive minor attention in meniscal substitute designs. Here, we used a synergistic methodology that combines imaging of the meniscal tissue structure, a structural computational model of the knee joint, and the fabrication of simplistic biomimetic composite laminates that mimic the basic structural units of the meniscus. Our findings highlight the importance of the radially oriented fibers, their mechanical role in the meniscus tissue, and their importance as a crucial element in engineering novel meniscal substitutes.

Feasibility of Stationary Cycling with Pedal Force Visual Feedback Post-Total Knee Arthroplasty: Implications for Inter-Limb Deficits in Knee Joint Biomechanics

The purpose of this study was to assess the biomechanical adaptations prompted by stationary cycling paired with visual feedback of vertical pedal reaction forces during both stationary cycling and overground walking for patients who underwent a total knee arthroplasty (TKA). Specifically, an emphasis on the inter-limb deficits in knee joint biomechanics were examined. Ten patients who underwent a TKA took part in an acute intervention with pre- and post-testing measurements of kinematics (240 Hz) and kinetics (1200 Hz) during stationary cycling and overground walking. The intervention phase consisted of six cycling sessions during which participants were provided with visual feedback of their bilateral peak vertical pedal reaction force, with instructions to maintain a symmetrical loading between limbs. A 2 × 2 (work rate/speed × time) repeated measures ANOVA (α = 0.05) was conducted on key outcome variables. Peak knee extension moment asymmetry during stationary cycling significantly improved (p = 0.038, η2p = 0.610) following the acute intervention. Walking velocities for both preferred (p = 0.001, d = 0.583) and fast (p = 0.002, d = 0.613) walking speeds displayed improvements from pre- to post-testing. Significant improvements in the total score (p = 0.009, d = 0.492) and ADL subscale score (p = 0.041, d = 0.270) for the Knee Injury and Osteoarthritis Outcome Score were present following the acute intervention. Stationary cycling with visual feedback may be beneficial post-TKA; however, further investigation is merited.

Biomechanics of knee joint during forward-walking and drop-landing after anterior cruciate ligament reconstruction: finite element and gait analysis

Biomechanics of knee joint during forward-walking and drop-landing after anterior cruciate ligament reconstruction: finite element and gait analysis

Effects of Fatigue and Unanticipated Factors on Knee Joint Biomechanics in Female Basketball Players during Cutting.

(1) This study examined the impact of fatigue and unanticipated factors on knee biomechanics during sidestep cutting and lateral shuffling in female basketball players, assessing the potential for non-contact anterior cruciate ligament (ACL) injuries. (2) Twenty-four female basketball players underwent fatigue induction and unanticipated change of direction tests, and kinematic and kinetic parameters were collected before and after fatigue with a Vicon motion capture system and Kistler ground reaction force (GRF) sensor. (3) Analysis using two-way repeated-measures ANOVA showed no significant interaction between fatigue and unanticipated factors on joint kinematics and kinetics. Unanticipated conditions significantly increased the knee joint flexion and extension angle (p < 0.01), decreased the knee flexion moment under anticipated conditions, and increased the knee valgus moment after fatigue (p ≤ 0.05). One-dimensional statistical parametric mapping (SPM1d) results indicated significant differences in GRF during sidestep cutting and knee inversion and rotation moments during lateral shuffling post-fatigue. (4) Unanticipated factors had a greater impact on knee load patterns, raising ACL injury risk. Fatigue and unanticipated factors were independent risk factors and should be considered separately in training programs to prevent lower limb injuries.

Response of Knee Joint Biomechanics to Landing Under Internal and External Focus of Attention in Female Volleyball Players.

The aim of this study was to examine the effect of attentional focus instructions on the biomechanical variables associated with the risk of anterior cruciate ligament injury of the knee joint during a drop landing task using a time series analysis. Ten female volleyball players (age: 20.4 ± 0.8years, height: 169.7 ± 7.1cm, mass: 57.6 ± 3.1kg, experience: 6.3 ± 0.8years) performed landings from a 50cm height under three different attentional focus conditions: (1) external focus (focus on landing as soft as possible), (2) internal focus (focus on bending your knees when you land), and (3) control (no-focus instruction). Statistical parameter mapping in the sagittal plane during the crucial first 30% of landing time showed a significant effect of attentional focus instructions. Despite the similarity in landing performance across foci instructions, adopting an external focus instruction promoted reduced vertical ground reaction force and lower sagittal flexion moment during the first 30% of execution time compared to internal focus, suggesting reduced knee loading. Therefore, adopting an external focus of attention was suggested to reduce most biomechanical risk variables in the sagittal plane associated with anterior cruciate ligament injuries, compared to internal focus and control condition. No significant differences were found in the frontal and horizontal planes between the conditions during this crucial interval.

The effect of body weight on the knee joint biomechanics based on subject-specific finite element-musculoskeletal approach

Knee osteoarthritis (OA) and obesity are major public health concerns that are closely intertwined. This intimate relationship was documented by considering obesity as the most significant preventable risk factor associated with knee OA. To date, however, the effects of obesity on the knee joint's passive-active structure and cartilage loading have been inconclusive. Hence, this study investigates the intricate relationship between obesity and knee OA, centering on the biomechanical changes in knee joint active and passive reactions during the stance phase of gait. Using a subject-specific musculoskeletal and finite element approach, muscle forces, ligament stresses, and articular cartilage contact stresses were analyzed among 60 individuals with different body mass indices (BMI) classified under healthy weight, overweight, and obese categories. Our predicted results showed that obesity significantly influenced knee joint mechanical reaction, increasing muscle activations, ligament loading, and articular cartilage contact stresses, particularly during key instances of the gait cycle—first and second peak loading instances. The study underscores the critical role of excessive body weight in exacerbating knee joint stress distribution and cartilage damage. Hence, the insights gained provide a valuable biomechanical perspective on the interaction between body weight and knee joint health, offering a clinical utility in assessing the risks associated with obesity and knee OA.

The effect of foot orientation modifications on knee joint biomechanics during daily activities in people with and without knee osteoarthritis

BackgroundAltered gait could influence knee joint moment magnitudes and cumulative damage over time. Gait modifications have been shown to reduce knee loading in people with knee osteoarthritis during walking, although this has not been explored in multiple daily activities. Therefore, this study investigated the effect of different foot orientations on knee loading during multiple daily activities in people with and without knee osteoarthritis. MethodsThirty people with knee osteoarthritis and twenty-nine without (control) performed walking, stair ambulation and sit-to-stand across a range of foot progression angles (neutral, toe-in, toe-out and preferred). Peak knee adduction moment, knee adduction moment impulse and knee pain were compared across a continuous range of foot orientations, between activities, and groups. FindingsIncreased foot progression angle (more toe-in) reduced 1st peak knee adduction moment across all activities in both knee osteoarthritis and control (P < 0.001). There was a greater reduction in knee adduction moment in the control group during walking and stair ambulation (P ≤ 0.006), where the knee osteoarthritis group already walked preferably less toe-out than the control group. Under preferred condition, stair descent had the greatest knee loading and knee pain compared to other activities. InterpretationAlthough increased foot progression angle (toward toe-in) appeared to be more effective in reducing knee loading for all activities, toe-in modification might not benefit stair ambulation. Future gait modification should likely be personalised to each patient considering the individual difference in preferred gait and knee alignment required to shift the loading medially or laterally.

Comparison of Side-to-Side Difference in Posterior Tibial Slope in Knees With Acute Versus Chronic Anterior Cruciate Ligament Deficiency.

The posterior tibial slope (PTS) is an important feature in knee joint biomechanics and indicates anterior-posterior knee stability. Increased PTS is a known risk factor for both primary anterior cruciate ligament (ACL) rupture and postreconstruction rerupture. To investigate the effect of long-term exposure to ACL deficiency on the PTS and the sagittal anatomy of the proximal tibia. Cross-sectional study; Level of evidence, 3. A total of 44 patients (38 men, 6 women) with a history of knee injury and ACL rupture confirmed by magnetic resonance imaging and physical examination were included in this study. Patients were divided into those with chronic ACL deficiency (group 1: injured ≥5 years prior; n = 22) and acute ACL deficiency (group 2: injured <1 year prior; n = 22). The medial and lateral tibial plateau PTS and anterior tibial translation were measured on monopodal weightbearing knee radiographs at 20° of flexion. The mechanical tibiofemoral angle (MTFA) and the medial proximal tibial angle (MPTA) were measured using an orthoroentgenogram. The side-to-side difference between the affected and unaffected knees was also calculated for all measurements. The mean duration of exposure to ACL deficiency was 7.6 years (range, 5-15 years) in group 1 and 4.4 months (range, 1-11 months) in group 2. Regarding the side-to-side differences in angular measurements, a higher medial PTS (affected vs unaffected: 12.4° vs 10.1°; P = .007), higher lateral PTS (11° vs 8.9°; P = .011), and increased varus alignment on both the MTFA (4.3° vs 2.4°; P = .036) and the MPTA (84.9° vs 86.3°; P = .033) were found in group 1, while no significant differences in angular measurements were found in group 2. Compared with group 2, patients in group 1 had a significantly higher side-to-side difference in the medial PTS (2.3° vs 0.1°; P = .0001), lateral PTS (2.1° vs 0.4°; P = .0001), and MPTA (1.4° vs 0.1°; P = .002). This study showed that the affected knees of patients with chronic ACL deficiency (≥5 years) had higher medial and lateral PTS compared with the unaffected contralateral knees. Therefore, when planning ACL reconstruction for patients with a history of long-term ACL deficiency, it is crucial to measure the preoperative PTS accurately.

Influence of Changes in Patella Indices on Total Knee Replacement Surgery Outcomes.

Total knee replacement is increasingly widely prescribed, not only for degenerative joint disease but also for other problems such as articular cartilage disease, misalignment due to causes other than degeneration, bone and joint cancer, and diseases that cause joint destruction. However, changes in knee joint biomechanics as well as complications of the patellofemoral joint after surgery lead to instability, joint pain, patellar rupture, and patellar tendon rupture. These are issues that challenge surgeons as well as make patients hesitant when considering knee replacement surgery. Understanding the changes in patella index that can occur after total knee replacement surgery will help surgeons carefully evaluate patients before surgery and calculate intraoperative techniques to minimize complications. Fifty-eight patients with 62 knees were diagnosed with osteoarthritis and underwent total knee replacement surgery. All patients had clinical and radiographic evaluation of the knee joint before and after surgery. Patellar indexes did not change significantly after surgery compared to before surgery. Before surgery, 2 patients (3.23%) had true patella baja. After surgery, 7 patients (11.29%) had true patella baja and 3 patients (4.84%) had pseudo-patella baja. The average knee flexion amplitude after surgery was 103.11±15.440, with only 2 patients losing extension >50º. The average KS score after surgery was 83.69±9.98, significantly improved compared to before surgery 33.44±11.38. Similarly, KFS score after surgery was 81.01±8.84 compared to before surgery 37.05±8.08. Changes in index of the patella before and after surgery affect the surgical results, the normal patella group has better results than the group with patella baja.

Posterior tibial slope influences joint mechanics and soft tissue loading after total knee arthroplasty.

As a solution to restore knee function and reduce pain, the demand for Total Knee Arthroplasty (TKA) has dramatically increased in recent decades. The high rates of dissatisfaction and revision makes it crucially important to understand the relationships between surgical factors and post-surgery knee performance. Tibial implant alignment in the sagittal plane (i.e., posterior tibia slope, PTS) is thought to play a key role in quadriceps muscle forces and contact conditions of the joint, but the underlying mechanisms and potential consequences are poorly understood. To address this biomechanical challenge, we developed a subject-specific musculoskeletal model based on the bone anatomy and precise implantation data provided within the CAMS-Knee datasets. Using the novel COMAK algorithm that concurrently optimizes joint kinematics, together with contact mechanics, and muscle and ligament forces, enabled highly accurate estimations of the knee joint biomechanics (RMSE <0.16 BW of joint contact force) throughout level walking and squatting. Once confirmed for accuracy, this baseline modelling framework was then used to systematically explore the influence of PTS on knee joint biomechanics. Our results indicate that PTS can greatly influence tibio-femoral translations (mainly in the anterior-posterior direction), while also suggesting an elevated risk of patellar mal-tracking and instability. Importantly, however, an increased PTS was found to reduce the maximum tibio-femoral contact force and improve efficiency of the quadriceps muscles, while also reducing the patellofemoral contact force (by approximately 1.5% for each additional degree of PTS during walking). This study presents valuable findings regarding the impact of PTS variations on the biomechanics of the TKA joint and thereby provides potential guidance for surgically optimizing implant alignment in the sagittal plane, tailored to the implant design and the individual deficits of each patient.

Gait characteristics of patients with symptomatic cartilage lesions of the knee

IntroductionLittle is known about the impact of articular cartilage lesions on knee joint biomechanics. ObjectivesThis investigation aimed to determine the gait characteristics of patients with symptomatic articular cartilage defects of the knee. MethodsGait analyses were performed at a regional joint preservation center. Assessments were completed on a treadmill with a 15-camera 3D motion-capture system. Participants walked for 2 minutes at a self-selected speed at 0° inclination. The resulting kinematic and spatiotemporal parameters were averaged across 20 consecutive gait cycles. Paired t tests or Wilcoxon ranked tests were performed on the data to compare biomechanical parameters between knees (α = 0.05). ResultsPatients (n = 30) walked at an average speed of 3.0 ± 0.7 km/h with a cadence of 60.4 ± 16.2 steps/min. Step lengths were comparable between limbs (P = .595). Maximum flexion during swing did not differ between knees (P = .507), but were lower than previously reported healthy adults. In the frontal plane, both knees remained in adduction throughout the gait cycle (P = .385). The maximal adduction reported in both knees were greater than previously reported for healthy adults. Maximal internal-external rotation patterns were comparable in stance (P = .475) and swing (P = .762) and to previous literature. ConclusionsGait characteristics were generally comparable between injured and contralateral knees of patients with symptomatic cartilage lesions of the knee. However, some parameters of gait in the sagittal and frontal plane were pathological when compared to previously published data from healthy adults.

Genomic Determinants of Knee Joint Biomechanics: An Exploration into the Molecular Basis of Locomotor Function, a Narrative Review.

In recent years, the nexus between genetics and biomechanics has garnered significant attention, elucidating the role of genomic determinants in shaping the biomechanical attributes of human joints, specifically the knee. This review seeks to provide a comprehensive exploration of the molecular basis underlying knee joint locomotor function. Leveraging advancements in genomic sequencing, we identified specific genetic markers and polymorphisms tied to key biomechanical features of the knee, such as ligament elasticity, meniscal resilience, and cartilage health. Particular attention was devoted to collagen genes like COL1A1 and COL5A1 and their influence on ligamentous strength and injury susceptibility. We further investigated the genetic underpinnings of knee osteoarthritis onset and progression, as well as the potential for personalized rehabilitation strategies tailored to an individual's genetic profile. We reviewed the impact of genetic factors on knee biomechanics and highlighted the importance of personalized orthopedic interventions. The results hold significant implications for injury prevention, treatment optimization, and the future of regenerative medicine, targeting not only knee joint health but joint health in general.

Effects of ankle Kinesio taping on knee and ankle joint biomechanics during unanticipated jumps in collegiate athletes.

Most biomechanical research on the application of Kinesio taping (KT) to the ankle joint focused on testing anticipated movements. However, ankle sprains frequently occur in real life in unanticipated situations, where individuals are unprepared and face sudden external stimuli. This situation is completely different from the anticipated situation. The aim of the present study was to investigate the effects of ankle KT application on the kinematic and kinetic characteristics of the knee and ankle joints during unanticipated jump tasks in collegiate athletes. Eighteen healthy collegiate athletes experienced three taping conditions in a randomized order: no taping (NT), placebo taping (PT), and KT, and performed unanticipated jump tasks. A 9-camera infrared high-speed motion capture system was employed to collect knee and ankle kinematic data, and a 3-dimensional force plate was utilized to collect knee and ankle kinetic data during the tasks. During the right jumps, KT significantly increased peak knee flexion angle (P = 0.031) compared to NT and significantly decreased peak vertical ground reaction force (P < 0.001, P = 0.001) compared to NT and PT. During the left jumps, KT significantly reduced peak ankle inversion angle (P = 0.022, P < 0.001) and peak ankle inversion moment (P = 0.002, P = 0.001) compared to NT and PT. During unanticipated jump maneuvers, KT reduced peak ankle inversion angle, peak vertical ground reaction force, and peak ankle inversion moment and increased peak knee flexion angle in collegiate athletes.

Insights into Meniscal Injuries Among Young Football Athletes: A Scoping Review

This comprehensive literature review delves into the prevalence, risk factors, management strategies, and outcomes related to meniscal injuries, particularly focusing on young football athletes. Drawing from eight scholarly articles, it covers various aspects of meniscal injuries, including incidence rates, treatment options, rehabilitation techniques, and long-term implications. Meniscal injuries are highlighted as significant in sports, notably in high-mobility activities like football, where sudden movements and twisting motions increase the likelihood of such injuries. The review explores common treatment methods such as meniscal repair, transplantation, and partial meniscectomy, along with tailored rehabilitation approaches aimed at facilitating athletes' return to play. Research indicates that while meniscal injuries are common among athletes, particularly in contact sports like football, early detection and proper treatment are crucial to mitigate lasting effects. Understanding knee joint anatomy and biomechanics is emphasized, along with the implementation of effective rehabilitation protocols to enhance joint stability and prevent re-injury. In summary, this literature review offers valuable insights into the multifaceted nature of meniscal injuries among young football athletes. By synthesizing evidence from diverse sources, it contributes to a deeper understanding of the epidemiology, management, and rehabilitation of meniscal injuries, informing clinical practices and guiding future research in sports medicine

Open Foot Stance Reduces Lead Knee Joint Loading During Golf Swing.

Foot stance and club type's relationship with lead knee joint biomechanics and possible involvement with injury incidences in amateur golfers have not been evaluated. This study included 16 male right-handed amateur golfers who performed golf swings with 2 different foot stances (straight and open) using 4 different club types (driver, 3 iron, 6 iron, and 9 iron) while standing on 2 force plates in a motion capture laboratory. A custom program calculated the kinematics and kinetics of the lead knee. Overall, the open stance reduced most translations, rotations, forces, and torques of the lead knee in all 4 club types when compared with the straight stance. The open stance reduced the rotation motion (-28%), compressive force (-5%), and rotation torque (-9%) when compared with the straight stance, which are the highest contributors to grinding of cartilage. The driver club had significantly larger values in most translations, rotations, forces, and torques when compared among the 4 club types. The open stance reduced the rotation motion, compressive force, and rotation torque in the lead knee joint compared with the straight stance. Lead knee joint biomechanics should be monitored to reduce injury in amateur golfers.

GAIT CHARACTERISTICS OF PATIENTS WITH SYMPTOMATIC CARTILAGE DEFECTS OF THE KNEE

AbstractObjectivesLittle is known about the impact of cartilage defects on knee joint biomechanics. This investigation aimed to determine the gait characteristics of patients with symptomatic articular cartilage lesions of the knee.MethodsGait analyses were performed at the Regional North-West Joint Preservation Centre. Anthropometric measurements were obtained, then 16 retroreflective markers representing the Plug-in-Gait biomechanical model were placed on pre-defined anatomical landmarks. Participants walked for two minutes at a self-selected speed on a treadmill on a level surface, then for 2 minutes downhill. A 15-camera motion-capture system recorded the data. Knee kinematics were exported into Matlab to calculate the average kinematics and spatiotemporal parameters per patient across 20 gait cycles. Depending on the normality of the data, paired t-tests or Wilcoxon ranked tests were performed to compare both knees (α = 0.05).Results20 patients participated; one of whom has bilateral cartilage defects. All 20 data sets were analysed for level walking; 18 were analysed for downhill walking. On a level surface, patients walked at an average speed of 3.1±0.8km/h with a cadence of 65.5±15.3 steps/minute. Patients also exhibited equal step lengths (0.470±0.072m vs 0.471±0.070m: p=0.806). Downhill, the average walking speed was 2.85±0.5km/h with a cadence of 78.8±23.1 steps/minute and step lengths were comparable (0.416±0.09m vs 0.420±0.079m: p=0.498). During level walking, maximum flexion achieved during swing did not differ between knees (54.3±8.6° vs 55.5±11.0°:p=0.549). Neither did maximal extension achieved at heel strike (3.1±5.7° vs 5.4±4.7°:p=0.135). On average, both knees remained in adduction throughout the gait cycle, with the degree of adduction greater in flexion in the operative knee. However, differences in maximal adduction were not significant (22.4±12.4° vs 18.7±11.0°:p=0.307). Maximal internal-external rotation patterns were comparable in stance (0.9±7.7° vs 3.5±9.8°: p=0.322) and swing (7.7±10.9° vs 9.8±8.3°:p=0.384). During downhill walking, maximum flexion also did not differ between operative and contralateral knees (55.38±10.6° vs 55.12±11.5°:p=0.862), nor did maximum extension at heel strike (1.32±6.5° vs 2.73±4.5°:p=0.292). No significant difference was found between maximum adduction of both knees (15.87±11.0° vs 16.78±12.0°:p=0.767). In stance, differences in maximum internal-external rotation between knees were not significant (5.39±10.7° vs 6.10±11.8°:p=0.836), nor were they significant in swing (7.69±13.3° vs 7.54±8.81°:p=0.963).ConclusionsKnee kinematics during level and downhill walking were symmetrical in patients with a cartilage defect of the knee, but an increased adduction during flexion in the operative knee may lead to pathological loading across the medial compartment of the knee during high flexion activities. Future work will investigate this further and compare the data to a healthy young population. We will also objectively assess the functional outcome of this joint preservation surgery to monitor its success.Declaration of Interest(b) declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research reported:I declare that there is no conflict of interest that could be perceived as prejudicing the impartiality of the research project.