Km Of Standard Single-mode Fiber Research Articles

Secure transmission in a W-band RoF system based on delta-sigma modulation

In this Letter, a delta-sigma modulation (DSM) encryption technique in a W-band RoF system is proposed. By performing DSM with different over-sample ratios (OSRs) on the OFDM signal based on the controlled keys generated by the chaotic system at the transmitter and performing constellation masking to disturb the transmitting signal for encryption, a high-order QAM-OFDM-DSM encrypted signal is achieved. In order to further improve the security of the system, bit bidirectional diffusion scrambling is used to resist chosen-plaintext attacks. After experimental verification, under the same transmission power, the encrypted DSM signal can achieve better security than single OSR of DSM signals through a 50-km standard single-mode fiber (SSMF) and a 3-m wireless channel, with the gain of sensitivity increased by ∼1 dBm. From the reliability of the system, the encrypted signal of the proposed scheme can be recovered, which meets a hard decision-forward error correction (HD-FEC) threshold of 3.8 × 10−3.

Alamouti-coded DSP algorithm with a simplified PTBC decoder for next-generation optical access networks

The use of Alamouti-coded polarization-time block code (A-PTBC) in combination with a simple single polarization coherent receiver enables phase-diverse coherent detection without any optical polarization tracking. However, applying this technique to high-speed single-carrier systems is not straightforward, as it requires specialized digital signal processing (DSP) algorithms for data recovery, which increases DSP complexity. In this paper, we propose a novel Alamouti-coded coherent algorithm designed to significantly reduce the complexity of the receiver DSP for data recovery. The proposed algorithm achieves the comparable performance to the conventional algorithm but requires only half the number of necessary equalizers for data recovery. We validate its performance through simulations and also experimentally demonstrate a 100 Gb/s 16-quadrature amplitude modulation (QAM) single-carrier coherent system employed the single-polarization coherent receiver over 20 km of standard single-mode fiber (SMF). Through the performance verification, the coherent system with the proposed algorithm exhibits performance comparable to that of the conventional Alamouti-coded coherent system and achieves a power budget of 34 dB when the transmit launch power is set to 7 dBm at a Bit Error Rate (BER) of 1 × 10−2 for 0-20 km fiber transmission.

Performance of quantum-dash mode-locked lasers (QD-MLLDs) for high-capacity coherent optical communications.

We investigate the capabilities and limitations of quantum-dash mode-locked lasers (QD-MLLDs) as optical frequency comb sources in coherent optical communication systems. We demonstrate that QD-MLLDs are on par with conventional single-wavelength narrow linewidth laser sources and can support high symbol rates and modulation formats. We manage to transmit 64 quadrature amplitude modulation (QAM) signals up to 80 GBd over 80 km of standard single-mode fiber (SSMF), which highlights the distinctive phase noise performance of the QD-MLLD. Using a 38.5 GHz (6 dB bandwidth) silicon photonic (SiP) modulator, we achieve a maximum symbol rate of 104 GBd with 16QAM signaling and a maximum net rate of 416 Gb/s per carrier in a single polarization setup and after 80 km-SSMF transmission. We also compare QD-MLLD performance with commercial narrow-linewidth integrable tunable laser assemblies (ITLAs) and explore their potential for use as local oscillators (LOs) and signal carriers. The QD-MLLD has 45 comb lines usable for transmission at a frequency spacing of 25 GHz, and an RF linewidth of 35 kHz.

S-Band WDM Transmission Using PPLN-Based Wavelength Converters and 400-Gb/s C-Band Real-Time Transceivers

Multi-band WDM transmission beyond the C+L-band is a promising technology for achieving larger capacity transmission by a limited number of installed fibers. In addition to the C- and L-band, we can expect use the S-band as the next band. Although the development of optical components for new bands, particularly transceivers, entails resource dispersion, which is one of the barriers to the realization of multi-band systems, wavelength conversion by transparent all-optical signal processing enables new wavelength band transmission using existing components. Therefore, we proposed a transmission system including a new wavelength band such as the S-band and made it possible to use a transceiver for the existing band by performing the whole-band wavelength conversion without using a transceiver for the new band. As a preliminary verification to demonstrate multi-band WDM transmission including S-band, we investigated the application of a novel wavelength converter between C-band and S-band, which consists of periodically poled lithium niobate waveguide, to the proposed system. We first characterized the conversion efficiency and noise figure of the wavelength converter and estimated the transmission performance of the system through the wavelength converter. Using the evaluated wavelength converters and test signals of 64 channels arranged in the C-band at 75-GHz intervals, we constructed an experimental setup for S-band transmission through an 80-km standard single-mode fiber. We then demonstrated error-free transmission of real-time 400-Gb/s DP-16QAM signals after forward error correction decoding. From the experimental results, it was clarified that thewavelength converter which realizes the uniformlossless conversion covering the whole C-band effectively achieves the S-band WDM transmission, and it was verified that the capacity improvement of the multi-band WDM system including the S-band can be expected by applying it in combination with the C+L-band WDM system.

100Gb/s coherent optical secure communication over 1000 km based on analog-digital hybrid chaos.

In recent years, the transmission capacity of chaotic secure communications has been greatly expanded by combining coherent detection and multi-dimensional multiplexing. However, demonstrations over 1000 km fiber are yet to be further explored. In this paper, we propose a coherent optical secure transmission system based on analog-digital hybrid chaos. By introducing an analog-digital converter (ADC) and a bit extraction into the feedback loop of entropy source, the broadband analog chaos is converted into a binary digital signal. This binary digital signal is then mapped to a 65536-level pulse amplitude modulation (PAM) signal and injected into the semiconductor laser (SL) to regenerate the analog chaos, forming a closed loop. The binary digital signal from the chaos source and the encrypted signal are transmitted via wavelength division multiplexing (WDM). By using conventional digital signal processing (DSP) algorithms and neural networks for post-compensation, long-haul high-quality chaotic synchronization and high-performance secure communication are achieved. In addition, the probability density distribution of the analog chaotic signal is effectively improved by adopting the additional higher-order mapping operation in the digital part of the chaos source. The proof-of-concept experimental results show that our proposed scheme can support the secure transmission of 100 Gb/s quadrature phase shift keying (QPSK) signals over 1000 km of standard single-mode fiber (SSMF). The decrypted bit error rate (BER) reaches 9.88 × 10-4, which is well below the 7% forward error correction (FEC) threshold (BER = 3.8 × 10-3). This research provides a potential solution for high-capacity long-haul chaotic optical communications and fills the gap in secure communications based on analog-digital hybrid chaos.

Fast polarization state tracking for dual-polarization direct detection with Jones-space field recovery.

Direct detection system is expected to possess the phase and polarization diversity in order to achieve high spectral efficiency and fiber impairment compensation such as chromatic dispersion and polarization rotation. In this Letter, we theoretically extend the concept of the proposed Jones-space field recovery (JSFR) to include a dynamic polarization rotation matrix and experimentally demonstrate the rapid polarization state tracking ability of the JSFR receiver based on a 3 × 3 optical coupler. Under a rotation of the state of polarization at a rate of 1 Mrad/s, we successfully transmit 59-GBd dual-polarization 16-ary quadrature-amplitude-modulation signals over an 80-km standard single-mode fiber based on a decision-directed least mean square (DD-LMS) or a recursive least square (DD-RLS), with a bit-error rate below the 14% hard-decision forward error correction threshold of 1 × 10-2. The experimental results indicate that the legacy polarization tracking algorithms designed for coherent optical communication are also applicable for this direct detection scheme. To our best knowledge, this work demonstrates the first polarization rotation-tolerant direct detection system with phase and polarization diversity, providing a low-cost and high-speed solution for short-reach communications.

Intelligent and adaptive intra-channel and inter-channel fiber nonlinearity compensation in coherent optical transmission systems.

Fiber nonlinearity mitigation is a crucial technology for extending transmission reach and increasing channel capacity in high-baud rate wavelength division multiplexing (WDM) systems. In this work, we propose a novel, to the best of our knowledge, architecture that combines learned modified digital back-propagation (L-MDBP) to compensate for intra-channel nonlinearity and a two-stage decision-directed least mean square (DDLMS) adaptive equalizer to mitigate inter-channel nonlinearity. By leveraging globally optimized model parameters and adaptive channel estimation, the proposed scheme achieves superior performance and lower computation complexity compared with conventional DBP. Specifically, in an 8 × 64 Gbaud 16-ary quadrature amplitude modulation (16QAM) experimental system over 1600 km of standard single-mode fiber (SSMF), our approach shows a 0.30-dB Q2-factor improvement and a complexity reduction of 82.3% compared with DBP with 8 steps per span (SPS). Furthermore, we enhance the adaptability of the architecture by introducing an online transfer learning (TL) technique, which requires only 2% of initial training epochs.

Low-Complexity Pruned Convolutional Neural Network Based Nonlinear Equalizer in Coherent Optical Communication Systems

Nonlinear impairments caused by devices and fiber transmission links in a coherent optical communication system can severely limit its transmission distance and achievable capacity. In this paper, we propose a low-complexity pruned-convolutional-neural-network-(CNN)-based nonlinear equalizer, to compensate nonlinear signal impairments for coherent optical communication systems. By increasing the size of the effective receptive field with an 11 × 11 large convolutional kernel, the performance of feature extraction for CNNs is enhanced and the structure of the CNN is simplified. And by performing the channel-level pruning algorithm, to prune the insignificant channels, the complexity of the CNN model is dramatically reduced. These operations could save the important component of the CNN model and reduce the model width and computation amount. The performance of the proposed CNN-based nonlinear equalizer was experimentally evaluated in a 120 Gbit/s 64-quadrature-amplitude-modulation (64-QAM) coherent optical communication system over 375 km of standard single-mode fiber (SSMF). The experimental results showed that, compared to a CNN-based nonlinear equalizer with a 6 × 6 normal convolutional kernel, the proposed CNN-based nonlinear equalizer with an 11 × 11 large convolutional kernel, after channel-level pruning, saved approximately 15.5% space complexity and 43.1% time complexity, without degrading the equalization performance. The proposed low-complexity pruned-CNN-based nonlinear equalizer has great potential for application in realistic devices and holds promising prospects for coherent optical communication systems.

4096-QAM OFDM THz-Over-Fiber MIMO Transmission Using Delta-Sigma Modulation

A terahertz (THz)-over-fiber multiple-input multiple-output (MIMO) transmission of 4096-ary quadrature amplitude modulation (QAM) orthogonal frequency division multiplexing (OFDM) supported by 46-GBaud quadrature phase shift keying (QPSK) signal at 320 GHz is experimentally demonstrated in this letter. By employing the polarization division multiplexing (PDM) technique and 1-bit delta-sigma modulation (DSM) quantization, we successfully implement 4.6-GHz 4096-QAM OFDM signal transmission over 20 km of standard single-mode fiber (SSMF) and a 3-m MIMO wireless link, and satisfy the soft-decision forward error correction (SD-FEC) threshold of 1.0 × 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-2</sup> with 15% overhead, which corresponds to a net rate of 84.4 Gbps for THz-over-fiber transmission. To the best of our knowledge, fusing OFDM and PDM, this is the highest rate achievable for DSM applications in THz communication. This experimental demonstration can provide a promising solution for high-order QAM signals in a fiber-wireless seamless network in future 6G networks.

Two-Channel OTDM System for Data-Center Interconnects: A Review.

It has been proposed to implement the >100 Gb/s data-center interconnects using a two-channel optical time-division multiplexed system with multilevel pulse-amplitude modulation. Unlike the conventional four-channel optical time-division multiplexed system which requires an expensive narrow pulse, the two-channel system can be implemented cost-effectively using a wide pulse (which can be simply generated using a single modulator). The two-channel system is expected to be practically available using an integrated transmitter in a chip due to the recent advances in photonics-integrated circuits. This paper reviews the current stage of research on a two-channel optical time-division multiplexed system and discusses possible research directions. Furthermore, it has been demonstrated that 200 Gb/s signals can be generated by using modulators with only 17.2 GHz bandwidth. Therefore, the use of the phase-alternating pulse can make the multiplexed signal robust to chromatic dispersion, enabling the 200 Gb/s 4-level pulse-amplitude-modulated signal to be transmitted over 1.9 km of standard single-mode fiber.

Optimization and Performance Evaluation of Single-Mode SOI Waveguides for Ultra-Broadband C-to-S Wavelength Conversion

In order to keep up with expected growth in data traffic, using multiple bands beyond the C band is an appealing solution as it can partly reuse deployed optical fibers. One way of handling multi-band data generation and reception is by using all-optical wavelength converters (AOWCs) to translate to or from the C band, where commercial equipment is easily available. In this work, we therefore designed and realized an AOWC targeting C-to-S band conversion. To respect the requirements of commercial applications, we aimed for a low-complexity high-bandwidth implementation with reasonably low power consumption, tolerance for typical process variations and potential for further integration. Thus we implemented the AOWC as a strip waveguide in a Silicon-on-insulator (SOI) technology. An optimization of the conversion bandwidth was conducted during design and initial characterizations confirmed a conversion efficiency of -32.8 dB and a high bandwidth of about 35 nm with grating couplers and likely beyond 50 nm for edge couplers. Using the fabricated converters, we were able to demonstrate a marginal 0.3 dB optical signal-to-noise ratio (OSNR) penalty for a back-to-back (b2b) transmission of a single-channel single-polarization 32 GBd quadrature-phase-shift keying (QPSK) signal converted from C to S band. Additionally, this converted signal was successfully transmitted over 100 km of standard single-mode fiber (SSMF). Finally, crosstalk issues arising in multi-channel conversion were investigated.

Coordinated-security based on probabilistic shaping and encryption in MMW-RoF system.

A coordinated-security probabilistic shaping (PS) physical layer encryption scheme is proposed for a W-band millimeter-wave radio-over-fiber (MMW-RoF) system. This scheme mainly includes substituting encryption, coordinated encrypted PS, and unequal length grouping scrambling, which can realize the coordination between PS and chaotic encryption. The key space of the proposed scheme is 10103, which can effectively prevent against brute force cracking and chosen-plaintext attacks. The encrypted orthogonal frequency division multiplexing (OFDM) signal is successfully transmitted over 50-km standard single-mode fiber (SSMF) and a 5-m wireless channel. The results show that the proposed scheme achieves 0.8-dB received optical power gain at a bit error rate (BER) of 10-3 compared with a traditional OFDM signal. The superiority of the proposed scheme in security performance and BER performance has been verified.

High-performance long-distance discrete-modulation continuous-variable quantum key distribution.

We experimentally demonstrate a high-rate discretely modulated continuous-variable quantum key distribution over 80-km standard single-mode fiber with a 2.5 Gbaud, 16-symbol, two-ring constellation. With the help of well-designed digital signal processing algorithms, the excess noise of the system can be effectively suppressed. The achieved secret key rates are 49.02 Mbits/s, 11.86 Mbits/s, and 2.11 Mbits/s over 25-km, 50-km, and 80-km optical fiber, respectively, and achieve 67.4%, 70.0%, and 66.5% of the secret key rate performance of a Gaussian-modulated protocol. Our work shows that it is feasible to build a high-performance, long-distance continuous-variable quantum key distribution system with only a small constellation size.

C-band 100-GBaud PS-PAM-4 transmission over 50-km SSMF enabled by FIR-filter-based pre-electronic dispersion compensation.

Chromatic dispersion (CD) is always an obstacle to C-band high-speed intensity modulation and direct detection (IM/DD) transmissions, especially with a fiber reach of > 20 km. To reach beyond net-100-Gb/s IM/DD transmission over 50-km standard single mode fiber (SSMF), we for the first time present a CD-aware probabilistically shaped four-ary pulse amplitude modulation (PS-PAM-4) signal transmission scheme with a FIR-filter-based pre-electronic dispersion compensation (FIR-EDC) for C-band IM/DD transmission system. With the help of the FIR-EDC at the transmitter, 100-GBaud PS-PAM-4 signal transmission at 150-Gb/s line rate and 115.2-Gb/s net rate over 50-km SSMF is realized with only feed-forward equalization (FFE) at the receiver side. The superiority of the CD-aware PS-PAM-4 signal transmission scheme over other benchmark schemes has been successfully verified by experiments. Experimental results show that 24.5% improvement of system capacity is obtained by the FIR-EDC-based PS-PAM-4 signal transmission scheme in comparison to the FIR-EDC-based on-off keying (OOK) signal transmission scheme. Compared with the FIR-EDC-based uniform PAM-4 signal transmission scheme or the PS-PAM-4 signal transmission scheme without EDC, the capacity improvement obtained by the FIR-EDC-based PS-PAM-4 signal transmission scheme becomes more profound. The results show the potential and feasibility of such CD-aware PS-PAM-4 signal transmission scheme applied in CD-constrained IM/DD datacenter interconnects.

Constant envelope OFDM transmission over metro-regional optical links

The transmission of constant envelope orthogonal frequency division multiplexing (CE-OFDM) signals is experimentally demonstrated in this paper to increase the reach of metro-regional optical links. A recirculating fiber loop was implemented for this aim. A reach extension of 100 km of standard single-mode fiber was achieved with the CE-OFDM-based system, considering 16 quadrature amplitude modulation (16-QAM) as subcarrier mapping and links without optical dispersion compensation. Link lengths as long as 700 km, with spectral efficiency of 1.89 b/s/Hz, were accomplished with performances below the forward error correction limit.

100 Gbaud PDM 16QAM NFDM transmission with neural network-based equalization

We demonstrate ultrahigh-speed data transmission at a symbol rate of 100 Gbaud in a nonlinear frequency division multiplexing (NFDM) system with continuous spectrum (CS) modulation. Neural network (NN)-based equalization schemes enable the transmission of 100 Gbaud polarization division multiplexed (PDM) 16-ary quadrature amplitude modulation (16-QAM) over 560 km of standard single-mode fiber (SSMF), with the bit-error-rate (BER) below the 25% overhead soft-decision forward error-correction (SD-FEC) threshold of 4 × 10−2.

Receive-diversity-aided power-fading compensation for C-band IM/DD OFDM systems.

A receive-diversity-aided power-fading compensation (RDA-PFC) scheme is proposed and demonstrated to eliminate the chromatic dispersion (CD)-induced power fading for C-band double-sideband (DSB) intensity modulation and direct detection (IM/DD) orthogonal frequency division multiplexing (OFDM) systems. By combining the responses before and after a dispersive element using a maximal-ratio combining (MRC) algorithm, the CD-induced power fading dips within the signal bandwidth of around 50 GHz can be effectively compensated for, which results in an up to 17.6-dB signal-to-noise ratio (SNR) improvement for the fading subcarriers after transmission over 10 km of standard single-mode fiber (SSMF). Using the 16 quadrature amplitude modulation (QAM) format, a diversity receiver with the proposed RDA-PFC scheme can support 170.6-Gbit/s OFDM signal transmission over a 10-km SSMF and reduces the bit error rate (BER) by more than an order of magnitude compared with a conventional receiver. Moreover, 208.1-Gbit/s adaptive bit and power loading OFDM signal transmission over a 10-km SSMF is realized by the proposed RDA-PFC scheme, which improves the capacity by 15.3% compared with the case without RDA-PFC at a BER of 3.8 × 10-3. The proposed RDA-PFC scheme shows great potential in CD-induced power-fading compensation for high-speed IM/DD OFDM systems.

FPGA-based 4 × 29.4912 Gbit/s PS-PAM4 signal transmission with a low-complexity probabilistic shaping scheme.

In this experiment, we demonstrate a real-time intensity modulation and direct detection (IM/DD) system based on a field programmable gate array (FPGA). For high-speed parallel signal processing, we propose and implement the simplified parallel-constant modulus algorithm (CMA) and decision-directed least mean square (DDLMS) equalizers with low complexity and low latency. Moreover, the bit-class probabilistic shaping (PS) scheme is adopted with very few hardware resources. The digital signal processing (DSP) steps are implemented in the XCVU9P-FLGB2104-2-I Xilinx FPGA with a clock frequency of 230.4 MHz. Based on the experimental results, 4 × 29.4912 Gbit/s PS-pulse amplitude modulation (PAM4) signals can be successfully transmitted over 25 km of standard single-mode fiber (SSMF) while satisfying the hard-decision forward error correction (HD-FEC) threshold at 3.8 × 10-3. Compared with the uniformly distributed PAM4 signal, the low-complexity PS scheme can improve the receiver sensitivity by more than 1 dB.

Silicon Photonic Single-Segment IQ Modulator for Net 1 Tbps/λ Transmission Using All-Electronic Equalization

There is a continuous need to scale optical communication networks' capacity to cope with the exponential growth of data traffic. Silicon photonics (SiP) retains significant potential as a platform for optical transceivers due to its CMOS compatibility, despite its limited electro-optic bandwidth and high driving voltage requirements. Here we present the design and characterization of two single-segment C-band SiP in-phase quadrature modulators (IQM) that differ in the phase shifter length, and we analyze the design tradeoffs based on their transmission performance. <bold xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">The large-signal transmission experiments indicate that the long IQM supports higher data transmission rates, which has 36 GHz 6-dB bandwidth and 10.5 V DC V_π under 1 V reverse bias.</b> With all-electronic equalization and on a single polarization, we transmit net 413 Gbps (95 Gbaud 32QAM) over 80 km of standard single-mode fiber (SSMF) under the 14.8% overhead concatenated forward error correction (C-FEC) BER threshold of 1.25 × 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−2</sup> . Using dual-polarization (DP) emulation and lookup table-based non-linear pre-distortion (NLPD), we demonstrate the transmission of 95 Gbaud DP-32QAM and 115 Gbaud DP-16QAM over 80 km of SSMF below the C-FEC BER threshold, corresponding to net rates of 827 Gbps and 800 Gbps, respectively. Moreover, we transmit 105 Gbaud DP-64QAM over 80 km below the 25% overhead soft-decision (SD) FEC BER threshold of 5 × 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">−2</sup> ; featuring the first demonstration of net 1 Tbps transmission using an all-silicon IQM. Employing only electronic equalization and single-segment IQM preserves the conventional architecture of coherent networks and transceivers, and highlights the potential of SiP as a platform for next-generation 800G applications.

Local Oscillator Power Adjustment-Based Adaptive Amplification for Coherent TDM-PON With Wide Dynamic Range

Coherent technology is a promising solution for future 100-Gb/s and even 200-Gb/s single-wavelength time-division multiplexing passive optical network (TDM-PON) systems. One of the key issues for coherent TDM-PON is the upstream burst-mode amplification. The limited resolution of the analog-to-digital converter (ADC) makes it challenging to detect burst signals with widely varying power levels. Local oscillator (LO) power adjustment is a promising solution to this problem. In the present study, we verified the feasibility of LO power adjustment for adaptive amplification in a 200-G coherent TDM-PON system. We investigated the overall performance of the system under different implementation conditions, such as ADC sampling scales, TIA MGC mode control voltages, LO optical power levels, and the received optical power (ROP). Simulation and experimental results indicated that LO power adjustment can widen the dynamic range of the coherent PON system. As a proof of concept, we tested the system performance with continuous-mode signals and signals of isolated patterns with a burst-mode data frame. The dynamic range was extended to >30 dB via LO power adjustment, with 38- and 37-dB power budgets for 200-Gb/s/λ coherent TDM-PON continuous signals and signals of isolated patterns, respectively, after a 50-km standard single-mode fiber (SSMF).