Kistler Force Plate Research Articles

Development of a Shoelace Tensile Testing System and Investigation into the Effects of Different Running Speeds on Shoelace Tensile Variation

AbstractThis study investigated the validity and sensitivity of a custom-made shoelace tensile testing system. The aim was to analyze the distribution pattern of shoelace tension in different positions and under different tightness levels during running. Mechanical tests were conducted using 16 weights, and various statistical analyses, including linear regression, Bland-Altman plots, coefficient of variation, and intraclass correlation coefficient, were performed to assess the system’s validity. Fifteen male amateur runners participated in the study, and three conditions (loose, comfortable, and tight) were measured during an upright stance. The system utilized VICON motion systems, a Kistler force plate, and a Photoelectric gate speed measurement system. Results showed a linear relationship between voltage and load at the three sensors (R2 ≥ 0.9997). Bland-Altman plots demonstrated 95% prediction intervals within ± 1.96SD from zero for all sensors. The average coefficient of variation for each sensor was less than 0.38%. Intraclass correlation coefficient values were larger than 0.999 (p<0.0001) for each sensor. The peak tension of the front shoelace was greater than that of the front and middle when the shoelace was loose and tight. The rear shoelace had the highest tension force. The study also found that shoelace tension varied throughout the gait cycle during running. Overall, this research provides a novel and validated method for measuring shoelace tensile stress, which has implications for developing automatic shoelace fastening systems.

The Kinetic and Kinematic Efficacy of Posterior Leaf Spring Ankle-foot Orthosis in Patients with Drop foot

Background: Dorsi flexor weakness is one of the common consequences of stroke with a negative impact on normal walking. Posterior leaf spring (PLS) Ankle Foot Orthosis (AFO) is the most frequent prescription to assist foot clearance and leg propulsion in these patients. However, the real efficacy of this AFO needs more attention. This study aimed to investigate the efficacy of PLS AFO on gait outcomes as the most common AFO in drop foot post-stroke patients. Methods: The study design was a pre–post-test experiments in which twenty drop foot patients with a mean age of 65 years with a mean age of 58.45 (±5.23) years who were 4/5 years post-stroke. They walked at self-selected walking speed on a 10 meters walk away in two conditions of with their own shoes and PLS AFO. The 3D motion capture gait analysis system including 6 vicon cameras and a Kistler force plate were used in order to measure gait kinetic and kinematic variables. For each trial, each joints (ankle, knee and hip) angle, moment and power were averaged over one-minute walking. Results: Walking with PLS showed a statistically significant improve kinetic and kinematic variables in hip, knee and ankle joints included power, moments and angles at entire gait cycle. P<0.05. Conclusions: In our study of stroke patients who were fitted with a PLS AFO, immediate significant improvements occurred in most kinetic and kinematic than shoes only in sacrifice some others.

The Validity of a Dual-Force Plate for Assessing Counter-Movement Jump Performance.

In a single testing session, the Kunwei force plates were placed directly on top of the in-ground Kistler force plate. This allowed for the simultaneous collection of vertical ground reaction forces from 30 participants (male, age = 22.8 ± 2.8 years, body mass = 74.3 ± 12.3 kg, height 178.2 ± 4.6 cm) during CMJ tests. The consistency between force plate systems was assessed using ordinary least products regression (OLPR) with bootstrapped 95% confidence intervals and the Interclass Correlation Coefficient (ICC). There was no fixed or proportional bias in the CMJ variables measured between the force plate systems. The variables exhibited a strong correlation across the force plates during the CMJ task (ICC > 0.950, p < 0.01). The findings of this study indicate that there was no statistical difference between the Kunwei and Kistler force plate systems when evaluating common CMJ strategy and outcome variables, which are considered the gold standard. Hence, the Kunwei force plate can be regarded as a reliable substitute for the established industry benchmark in evaluating the force-time characteristics of the CMJ. Researchers, athletes, and coaches have the option to utilize this affordable and portable choice as a substitute for the more expensive laboratory-based force plate system. This alternative allows for the precise measurement of CMJ performance and force-time variables.

An evaluation of a bespoke modified UCBL foot orthosis on subjects with flat foot using kinetic measurements and user comfort scores: A randomized controlled trial

AimThe purpose of this study was to assess and evaluate the effect of a bespoke Modified UCBL Foot Orthosis (MUFO) using both kinetic parameters (Centre of Pressure (CoP) and the Ground Reaction Force (GRF) pattern) and comfort scores in subjects diagnosed with flat foot. MethodThis study included thirty-four young adults with symptomatic flatfeet. Two Kistler force plates (100 Hz) were used to record the CoP sway and GRF pattern during four conditions; 1) an MUFO and standard-fit shoe; 2) the University of California-Berkley Lab (UCBL) insole and standard-fit shoe; 3) barefoot and 4) standard-fit shoe only. The magnitude of subject comfort with UCBL and MUFO also was measured by a 10 cm Visual Analogue Scale (VAS) during walking. ResultsThe MUFO decreased mean lateral displacement in the initial phase and midstance of gait compared to barefoot walking. During the propulsion phase use of the new MUFO produced more lateral excursion with a mean difference of 3 mm) P < 0.001(compared to barefoot walking and standard shoe wear. No significant difference in comfort rate was found between the MUFO and UCBL (P = 0.165). ConclusionThe MUFO produced effective pronation control and decreased the CoP displacement in all of stance phase.

Investigation of joint contact forces during walking in the subjects with toe in gait due to increasing in femoral head anteversion angle.

Toe-in gait is a pathology in which the child walks and turns the foot inward instead of pointing straight ahead. The alignment of the lower limb structure changes in this disease, increasing the incidence of knee and hip osteoarthritis. This study aimed to determine the kinematic and joint loading in subjects walking with a toe-in gait pattern. This study selected two groups of subjects: normal subjects and those with toe-in gait due to an increased femoral head anteversion angle (each group consisted of 15 subjects). A Qualisys motion analysis system and a Kistler force plate were used to record the motions and forces applied to the leg while walking. OpenSim software (version 3.3) was used to analyze the range of motion, moments, muscle forces, and joint contact forces in both groups of subjects. The mean values of stride length for normal subjects (1.1 ± 0.141 m) and those with toe-in gait (0.94 ± 0.183 m) differed significantly. The mediolateral component of the ground reaction force decreased significantly in the toe-in gait group compared to normal subjects (p-value = 0.05). The peak force of most of the hip joint muscles increased significantly in those with toe-in gait compared to normal subjects (p-value < 0.05). The results of this study showed that those with toe-in gait, due to an increase in femoral head anteversion angle, only had a change in rotation of the pelvic and hip joint. There was no significant difference between walking speed and most ground reaction force components between normal subjects and those with toe-in gait. As the peaks of most of the hip joint muscles increased significantly in the toe-in gait group, this increased joint contact forces (especially the anteroposterior component of the hip joint and the mediolateral component of the knee joint), which may ultimately increase the incidence of hip and knee joint osteoarthritis.

Ground reaction forces better than center of pressure differentiate postural control between young female volleyball players and untrained peers

A comprehensive explanation of the relationship between postural control and athletic performance requires compare body balance in athletes with their never training counterparts. To fill this gap in relation to volleyball, the aim of this study was to compare the balance of intermediate adolescent female players (VOL, n = 61) with inactive peers (CON, n = 57). The participants were investigated in normal quiet stance during 20 s trials on a Kistler force plate. The traditional spatial (amplitude and mean speed) and temporal (frequency and entropy) indices were computed for ground reaction forces (GRF) and center-of-pressure (COP) time-series. The spatial parameters of the both time-series did not discriminate the two groups. However, the temporal GRF parameters revealed much lower values in VOL than in CON (p < .0001). This leads to three important conclusions regarding posturography applications. First, GRF and COP provide different information regarding postural control. Second, measures based on GRF are more sensitive to changes in balance related to volleyball training and perhaps to similar training and sports activity regimens. And third, the indicators calculated based on these two time series can complement each other and thus enrich the insight into the relationship between balance and sports performance level.

Different Dual-Task Paradigm Reduce Postural Control Ability and Dynamic Stability of Healthy Young Adults during Stair Descent.

This study aimed to compare the impacts of different dual-task paradigms on the postural control ability and dynamic stability of the youth during stair descent. Twenty young adults without regular exercise habits were randomly recruited to perform stair descent tasks with three different paradigms: single-task, cognitive dual-task, and manual dual-task. Kinematic and dynamic data were collected using an 8 Vicon motion analysis system and a Kistler force plate to evaluate postural control ability and dynamic stability during stair descent. The variation trends of lower limb joint moment were similar under the three task models. Compared with a single-task, both dual-task paradigms significantly reduced the mechanical parameters and dynamic stability during stair descent. The dual-task paradigm increases the risk of stair-related falls. Both cognitive and manual tasks have similar impacts on postural control ability and dynamic stability during stair walking. It is recommended that people avoid performing dual tasks during stair descent.

Spatiotemporal variables comparison between drop jump and horizontal drop jump in elite jumpers and sprinters.

General expectations speculated that there are differences between drop jump (DJ) and horizontal drop jump (HDJ) exercises. While these criteria may be valid, we have yet to find a report that explores these differences in competitive level athletes. The study aimed to compare spatiotemporal variables in the drop jump (DJ) vs. the horizontal drop jump (HDJ) in elite jumpers and sprinters. Sixteen international-level male athletes performed two DJ attempts at different fall heights 0.3, 0.4, and 0.5 m (DJ30, DJ40, and DJ50), and after 2 h, they performed two HDJ attempts (HDJ30, HDJ40, HDJ50). All jumps were performed on a Kistler force plate. The variables analyzed were ground contact time (GCT), flight time (FT), eccentric phase time, concentric phase time, and time to peak concentric force. The GCT was found to be significantly shorter in DJ vs. HDJ (Z = 4.980; p = 0.0001; ES = 3.11). FT was significantly lower in DJ30 versus HDJ30 (Z = 4.845; p = 0.0001, d = 3.79), but significantly higher in DJ40 vs. HDJ40 (Z = 4.437; p ≤ 0.0001, d = 3.70) and in DJ50 vs. HDJ50 (Z = 4.549; p ≤ 0.0001, d = 4.72). It is concluded that the HDJ requires more time for force production, that the eccentric component requires more time than the concentric and that it is not recommended to use the HDJ over the DJ for reactive purposes. This is the first study that comprehensively compare the differences between DJ and HDJ, which will assist coaches and researchers in the design of future training strategies.

In vivo knee biomechanics during badminton lunges at different distances and different foot positions by using the dual fluoroscopic imaging system.

Background: Lunges are common in badminton. Distance and foot position affect knee joint loadings under lunges, which are closely related to knee injury incidence. Investigations involving dynamic knee motion in vivo, kinetics, and muscle activation in lunges, especially during lunges of different distances and foot positions, are instrumental for understanding knee performance and injury risks of players. Methods: A total of 10 experienced badminton athletes (10 females; height, 164.5 ± 5.0cm; weight, 59.3 ± 6.0kg; and age, 22 ± 1.0years) were recruited. By using a high-speed dual fluoroscopic imaging system, Qualisys motion capture system, Kistler force plate, and Delsys electromyography simultaneously, data were collected during players' 1.5 times leg length lunge, the maximum lunge, and the maximum lunge while the foot rotated externally. Magnetic resonance and dual fluoroscopic imaging techniques were used to analyze the in vivo knee kinematics. Results: Compared with the 1.5 times leg length lunge, knee flexion for the maximum lunge increased significantly (p < 0.05). The anterior-posterior ground reaction force (GRF) and vertical GRF of the maximum lunge were significantly higher than those of the 1.5 times leg length lunge. During the two different foot position lunges with the maximum distance, the posterior translation of knee joint was larger (p < 0.05) when the foot rotated externally than the normal maximum lunge. Moreover, the anterior-posterior GRF and vertical GRF increased significantly when the foot rotated externally. Significant differences were observed in valgus-varus rotation torque and internal-external rotation torque of the knee joint under the two distance lunges and two foot position lunges (p < 0.05). No significant difference was found in knee muscle activation during the two distance lunges and during the two foot position lunges. Conclusion: High knee torque and compressive loadings with increasing lunge distance may cause knee injuries in badminton. When lunging in the external foot rotation under the maximum distance, high quadriceps force and posterior tibia translation force could result in knee injuries among badminton players.

Dynamic postural control in women athletes with and without nonspecific low back pain with high and low pain-related anxiety- A case-control study

BackgroundLow back pain is common among athletes and it has been shown that postural control is altered in the general population with nonspecific low back pain (NSLBP). Psychological factors may also predispose individuals to risk of altered postural control. Dynamic postural control is essential to the performance of athletes. This study aimed to compare the dynamic postural control between women athletes with and without NSLBP with high and low pain-related anxiety.MethodsForty-five female athletes (15 NSLBP with high pain-related anxiety, 15 NSLBP with low pain-related anxiety, and 15 healthy (control)) were included. Pain-related anxiety was assessed using the Pain Anxiety Symptom Scale-20 (PASS-20). Based on the cut-off score of 30 for the total score of PASS-20, NSLBP patients were classified into two groups of low and high pain-related anxiety. Participants performed double-leg vertical drop jump (DVJ) and single-leg vertical jump (SVJ) tests on a Kistler force plate (type 9260AA6, Kistler Instruments Inc, Switzerland). The total root mean square (RMS) of the center of pressure (COP), COP displacement in the anteroposterior (AP), and mediolateral (ML) directions, COP mean velocity, and time to stabilization (TTS) in vertical, AP, and total directions were extracted from COP and ground reaction force data using MATLAB software. One-way Analysis of variance (ANOVA) and Welch’s ANOVA were employed to compare the groups. In case of significant findings, post hoc tests were performed.ResultsThe results showed that during DJV, athletes with high pain-related anxiety had significantly greater TTS in all total, AP, and ML directions than other groups (P < 0.05). Also, the control group showed greater total RMS distance during DJV than either NSLBP group. However, no significant differences in TTS and COP parameters were found between the groups during SVJ (P > 0.05).ConclusionsThe findings suggest that pain-related anxiety may contribute to athletes’ postural control strategies. Therefore, it is important to consider the level of pain-related anxiety during planning postural control exercises for women athletes with NSLBP.

Force plate coverings significantly affect measurement of ground reaction forces.

The purpose of this study was to carry out a material test to investigate the effect of different force plate coverings on vertical and horizontal ground reaction force and derived parameters. Four surface conditions were analysed; bare plate, vinyl, sportflex, and astroturf on a Kistler force plate. Vertical data were collected by dropping a 2 kg rigid, textured medicine ball from a low (61 cm) and a high (139 cm) height. Horizontal data were collected using a custom-built, rigid, metal pendulum device. A one-way ANOVA revealed a significant main effect of surface on peak force and rate of force development for high height, low height, and horizontal force conditions (all p<0.001), with effect sizes in the post-hoc analysis being mostly large to very large. Interestingly, sportflex yielded the highest vertical but the lowest horizontal ground reaction forces. This study showed the use of current force platform coverings had a significant effect on peak force and rate of force development measurements during a standardised testing procedure. Future research should try to obtain rate of force development values that more closely replicate aspects of human performance during standardised testing procedures. Also further investigate the effect of the different surfaces on ground reaction forces during human movement.

Investigating the Correlation Between Agility and Jump Performance Indices in Indian Contact Sports Persons: An Observational Study

Introduction: The use of the jump as a plyometric exercise is a way to improve jump performance. Additionally, as it requires abrupt stopping, starting, and changing directions, it might enhance agility. Thus, this study aims to find out the relationship between drop jump variables and agility in contact sports.&#x0D; Materials and Methods: A total of 30 national-level male athletes (age=20.06±1.94 years; height=1.67±0.06 m; body weight: 58.02±8.40 kg) participated in this study. A drop jump test was performed on the Kistler force plate and agility was assessed by using the Illinois agility test along with the agility t-test. The Pearson correlation test was used to find the significant relationship between agility tests completion time and jump height from flight time, reactive strength index, average power, average force, and contact time for drop jumps.&#x0D; Results: The results indicate a significant moderate negative correlation between jump height from flight time and agility test time (r=-0.501 with Illinois agility test, P=0.005, and r=-0.601 with agility t-test, P=0.001). A significant weak negative correlation was observed between average power and Illinois agility test time (r=-0.477, P=0.008).&#x0D; Conclusion: These findings indicate that improved drop jumps will interpret better agility movements or vice versa; therefore, individuals who perform sports that require agile movement benefit from agility assessment and drop jump training.

Force transmission capacity of the lower limb during walking of amputees with bone-anchored prostheses compared with socket prostheses and persons with hip replacements

BackgroundRestoring the ability to walk with a prosthesis is considered a fundamental rehabilitation goal after transfemoral amputation. An essential prerequisite for achieving this goal is adequate force transmission between the prosthesis and the body. Does bone anchorage of an artificial limb permit a more normal force transmission? MethodsData of 15 healthy subjects, nine amputees fitted with bone-anchored prostheses, nine amputees using socket prostheses, and 18 patients with a total hip replacement were included in this multicenter, observational study. Ground reaction force was measured using Kistler force plates. Kinematics was recorded with 12 Vicon Bonita cameras. Subjects were instructed to walk at three different speeds: first at their self-selected, then at slow, and finally at fast speed. FindingsSelf-selected walking speeds of subject groups were significantly different, osseointegrated amputees walked the slowest. The lowest ground reaction force was measured for osseointegrated amputees on the prosthetic side, who also showed the highest force on their contralateral side. Patients with hip replacements showed values similar as healthy subjects. The vertical center of gravity movement was specific for each subject group. InterpretationThe force transmission capacity of the bone-anchored prosthetic leg is limited during walking and is lower than both in socket prostheses users without symptoms and patients with total hip replacement. Therefore, active amputees well fitted with a socket prosthesis who consider a transition to bone-anchorage should be advised that their walking speed may decrease with high probability, and that their self-selected walking speed may even be slower than 3 km/h.

Comparison of mechanical energy transfer during right-forward lunge between female amateur and professional badminton players

BackgroundRegarding their skill levels, badminton players present different movement patterns during front and right lunging. The main objective of this study was to compare the mechanical energy transfers attributable to right-forward lunges between amateur and professional badminton players to study variations in mechanical efficiency at various skill levels.MethodIn this cross-sectional study, twenty female badminton players were recruited (Professional group n = 10 and Amateur group n = 10). The kinematics and kinetics of the lower extremities were recorded while performing right-forward lunges using Vicon motion capture and Kistler force plates. Mechanical energy expenditures (MEE) were extracted in eccentric transfer, concentric transfer, and no-transfer phases for the hip, knee, and ankle joints. At each joint, mechanical energy compensations (MEC) were also determined. Independent samples t-tests were used to analyze data at a significance level of α = 0.05.ResultRegards to mechanical energy expenditures at the initial heel contact phase, the professional players demonstrated statistically significant more ankle no-transfer (p < 0.003), less knee concentric transfer (p < 0.026), more knee eccentric transfer (p < 0.001), and less hip no-transfer (p < 0.001). At the same time, the amateur athletes showed significantly more ankle eccentric transfer (p < 0.042) at maximal knee flexion angle time point. Analyzing mechanical energy compensation coefficients showed that the professional athletes had significantly less ankle concentric transfer (p < 0.001), more knee concentric transfer (p < 0.001), more knee eccentric transfer (p < 0.001), and more hip eccentric transfer (p < 0.001) at initial contact phase. While they found to have significantly more ankle eccentric transfer (p < 0.007), less knee concentric transfer (p < 0.001), less knee eccentric transfer (p < 0.001), more hip concentric transfer (p < 0.001), and more hip eccentric transfer (p < 0.001) at maximal knee flexion angle.Conclusionit is shown that the mechanical energy efficiency of the right-forward lunge is skill-related. It seems that altered lunge landing biomechanics may increase the risk of ankle and knee injuries and muscular damages in amateur athletes. It is recommended for amateur players to follow a injury prevention training program that promotes proper lunging technique.

Effects of shoe collar types on ankle and knee biomechanics characteristics when performing the side-step cutting task

ABSTRACT This study aimed to examine the effect of football shoes with different collar types on ankle and knee kinematic and kinetics features during 45° and 135° side-step cutting tasks. Fifteen healthy college football players volunteered for the study. Each participant was instructed to perform side-step cutting tasks with high, low, and no collar football shoes. The kinematic and ground reaction force data were measured using a Vicon motion capture system and a Kistler force plate, respectively. Two-way MANOVAs with repeated measures were used to examine the effect of shoe collar type and task conditions. There were no interaction effects. The high collar football shoe showed decreased ankle range of motion in the sagittal plane (p = 0.010) and peak ankle external rotation moment (p = 0.009) compared to the no collar football shoe. The high (p = 0.025) and low (p = 0.029) collar football shoes presented greater peak ankle external rotation angles than the no collar football shoe. These results imply that football shoes with high collars made of high intensity knitted fabric could be used to restrict ankle joint movement, with potential implications for decreasing the risk of ankle sprain injuries in football players.

Comparative Efficacy of Vibration foam Rolling and Cold Water Immersion in Amateur Basketball Players after a Simulated Load of Basketball Game.

To compare the efficacy of different recovery strategies (sitting; cold water immersion, CWI; vibration foam rolling, VFR) on the lower extremities of amateur basketball players after the simulated load of a basketball game, we assessed the power, agility, and dynamic balance before and after interventions. Ten amateur basketball players alternately underwent 12 min of sitting, 12 min of CWI at 5 °C, and 12 min of VFR. The power, agility, and dynamic balance were measured immediately post-warm-up, immediately post-game, immediately post-intervention, 1 h after interventions, and 24 h after interventions. To simulate the load of a basketball game, specific movements were designed and implemented. Jump height was measured using a Kistler force plate. Reaction time and dynamic balance score were assessed using the Pavigym agility response system and the Y balance test, respectively. The data were analyzed with a two-way repeated measures analysis of variance (ANOVA). The results showed that the vertical jump height significantly decreased after the CWI intervention compared to the CON and VFR groups (p < 0.001). At 1 h after the intervention, the vertical jump height in the CON group showed delayed recovery compared to the CWI and VFR groups (p = 0.007; p < 0.001). At 24 h after the intervention, the vertical jump height in the CWI group further increased and was significantly different from the CON and VFR groups (p < 0.001; p = 0.005). Additionally, reaction times significantly increased immediately after the CWI intervention (p = 0.004) but showed further recovery at 24 h compared to the CON group (p < 0.001). The dynamic balance score significantly rebounded after the CWI intervention compared to the CON group (p = 0.021), with further improvement at 24 h (p < 0.001). CWI initially showed negative effects, but over time, its recovery effect was superior and more long-lasting. VFR had the best immediate effect on lower limb recovery after the game.

Relationship of Force–Velocity Profile between Field Sprints and Lab Ballistic or Cycling Ergometer for Wheelchair Basketball Players

The upper limb force–velocity relationship (FVR) is a crucial aspect of athletic performance, particularly in para-sports where upper limb movements play a leading role in activities such as wheelchair propulsion. Athletes’ mechanical capacities can be evaluated on the field or in lab conditions. However, no studies have yet indicated a relationship between ergometers and field FVR or performances. Understanding para-athletes’ upper limb FVR can provide important insights for developing effective training programs and improving athletic performance in wheelchair basketball players. Twenty-three wheelchair basketball players (12 women and 11 men) from French national teams performed a battery of three tests consisting of a 20 m sprint (SP) with Inertial measurement units (IMU) on wheels, horizontal upper limb push-offs on a frictionless sled with two Kistler force plates (HBP), and a crank ergometer sprint test (CES) derived from arm ergometer sprints using Brachumera, Lode. For the SP test, the FVR was computed with an estimation of force from the acceleration, the rolling resistance, and an estimation of the air resistance. Correlations between each variable measured were computed via Pearson correlations in R, assuming a strong relationship when r = 0.7–1.0, moderate when r = 0.40–0.69, and weak when r &lt; 0.1–0.39. Significant differences were assumed when p &lt; 0.05. Strong correlations were found between the results of the three tests conducted. The correlation coefficient between maximal theoretical force (F0) data ranged from 0.85 to 0.88, and that between maximal theoretical power (P0) data ranged from 0.87 to 0.94. However, for maximal theoretical velocity (V0) data, the correlations between the three tests were less important. The performance variables showed a strong correlation with power measured in the HBP test without load. There was a significant relationship between the HBP, CES, and SP variables. There was a correlation between performance on the three tests in our population, especially for power. However, the V0 value of HBP was not representative of any performances. This work uses multiple protocols to assess para-athletes’ performance and shows that upper limb symmetry depends on the gesture of the task and the personal sports’ wheelchair.

Evaluation of stability of the subjects with toe in gait due to increase in femoral head anteversion angle during quiet standing

Background: Toe in gait may be due to metatarsus adductus, increase in tibia torsion and femoral anteversion. It is controversial that it influences on standing stability or not. Therefore, the aim of this study was to evaluate the effects of toe in gait, due to increase in femoral head anteversion, on standing stability. Method: 11 subjects with toe in gait due to increase in femoral head anteversion were recruited in this study. There was also a control group matched with the toe in gait group. A Kistler force plate was used to evaluate stability of the subjects during quiet standing based on center of pressure (COP) sways. Results: The mean values of center of pressure (COP) excursion in anteroposterior direction was 14.41±4.66 and 23.41± 8.17 mm in normal and those with toe in gait, respectively (p-value &lt;0.05). The difference between COP excursion in mediolateral direction in both group was not significant (p-value=0.085). There was a significant difference between velocity and path length of COP in both planes between the groups (p-value&lt;0.05). Conclusion: Based on the results of this study, the subjects with toe in gait due to increase in femoral head anteversion are more unstable in quiet standing than normal subjects.

The Influence of Anthropometric Variables and Filtering Frequency on Center of Pressure Data.

Good postural control is considered to be a key component of an active lifestyle, and numerous studies have investigated the Center of Pressure (CoP) as a way of identifying motor deficits. However, the optimal frequency range for assessing CoP variables and the effect of filtering on the relationships between anthropometric variables and CoP are unclear. The aim of this work is to show the relationship between anthropometric variables and different ways of filtering the CoP data. CoP was measured in 221 healthy volunteers using a KISTLER force plate in four different test conditions, both mono and bipedal. The results show no significant changes in the existing correlations of the anthropometric variable values over different filter frequencies between 10 Hz and 13 Hz. Therefore, the findings with regard to anthropometric influences on CoP, with a reasonable but less than ideal filtering of the data, can be applied to other study settings.

Evaluation of Static and Dynamic Stability and Its Relationship With Fear of Falling in Patients With Mild to Moderate Knee Osteoarthritis

Objective Knee osteoarthritis is one of the most common musculoskeletal disorders affecting balance. It is also a risk factor for falling in older people. People with a history of falling, whether being injured or not, acquire a fear of potential falling, so they limit their functional activities, leading to decreased mobility, muscle weakness, and increased risk of falling in the future. Evaluating the relationship between balance and fear of falling in these patients can detect the disability mechanisms and falling and also help find more effective therapeutic methods for these patients. Some previous studies evaluated the stability of patients by clinical methods in static situations and related it to fear of falling. However, the walking stability of patients was not assessed by laboratory-based systems in previous studies. Therefore, we aimed to evaluate dynamic (during walking and based on the center of mass sways) and static stability (based on the center of pressure sways) and their relationship with falling risk in patients with knee osteoarthritis. Materials &amp; Methods This is a descriptive cross-sectional study. A group of 15 subjects with mild to moderate knee osteoarthritis with a Mean±SD age of 50±3.22 years and 15 normal subjects with comparable age, height, and weight participated in this study. The subjects’ standing stability was evaluated using a Kistler force plate based on mediolateral (ML) and anteroposterior (AP) displacements of the center of pressure. Also, the dynamic stability of the subjects was evaluated during walking and based on the center of mass-base of support relationship in AP and ML directions. Kinematic data were collected using a motion analysis system with 7 high-speed cameras and a Kistler force plate. To model the body segments, the output of Qualisys track manager software was exported to Visual 3D software. Fear of falling was assessed by the native version of the fall efficacy scale (FES-I). The normal distribution of data was checked by the Shapiro-Wilk test. The independent samples t-test was used to compare the stability of patients and normal subjects. The Pearson correlation coefficient was used to evaluate the relationships between static and dynamic stability parameters and fear of falling in patients with knee osteoarthritis. Results Patients with knee osteoarthritis had less stability during standing and walking than healthy subjects (P&lt;0.05). Moreover, based on the results of this study, there was a linear relationship between the center of body pressure (COP) excursions in the AP direction and the fear of falling scale. Still, it was not significant (r=0.416, P=0.123), and there was no correlation between the other COP parameters with FES (r=0, P&gt;0.05). The correlations between mean center of mass (COM) excursion in AP and ML directions and FES were 0.309 and -0.123, respectively; however, these correlations were also not statistically significant (P&gt;0.05). Conclusion Based on the results of this study, there is no significant relationship between static and dynamic stability of the patients with mild to moderate knee osteoarthritis (based on COP-COM variables) and the fall efficiency scale. So, it seems that to improve these patients’ functional abilities, and the therapists must focus on the other parameters that affect the falling, such as reducing pain, improving proprioception, and enhancing muscle strength. It is suggested that future studies include a more varied age range of elderly people and evaluate all contributing factors in falling of patients with knee osteoarthritis (such as pain, proprioception, vision, and muscle strength) and also evaluate the stability of patients with both laboratory-based and clinical tests.