Kaolin Clay Suspension Research Articles

Combined use of kaolin and bentonite molding clays

The article compares the properties of kaolin and bentonite clays. It has been shown that kaolin clays have high fire resistance, and bentonites have high astringent properties. The experience of specialists from OJSC “MTW” in the joint use of various types of clays is considered. The combination of kaolin and bentonite in the suspension made it possible to increase the strength of the molding sand while maintaining moisture levels. The disadvantage of kaolin clay suspensions is that the moisture content increases with increasing dosage. When preparing bentonite suspensions, their short shelf life should be taken into account.

Estimating drinking water turbidity using images collected by a smartphone camera

ABSTRACT The lack of robust water quality data in drinking water services in many low-income settings can be attributed to inadequate funding for regular monitoring using analytical equipment. Turbidity is an indicator that is relatively quick and easy to measure; however, it still requires a turbidimeter and a trained operator. This study developed an entire smartphone camera-based application to measure turbidity in drinking water, removing both the need for external equipment and skilled labour. The application was created using a convolutional neural network, able to classify water samples into eight turbidity bins ranging from 0 to 40 NTU. The turbidity of the samples was created using formazine and kaolin clay suspensions. The in-built camera of a smartphone was used to capture images of water samples with known turbidity values. This algorithm was then embedded in a smartphone application, thereby providing an easy-to-use tool for users to estimate turbidity. Specifically, the protocol for using this application was developed with the intention that it will be used in low-resource settings by laypersons. Formazine samples achieved a turbidity classification accuracy of 98.7%, while kaolin clay samples achieved 90.9% accuracy using this method, which provides an encouraging proof of concept, as justification for further testing and improvements.

PHYSICOCHEMICAL PROPERTIES AND BIOFLOCCULATING EFFICIENCY OF POLAR RESIDUE OF PARTITIONED EXTRACT OF TELFAIRIA OCCIDENTALIS LEAF

Water contamination has become more pronounced as a result of human economic growth all over the world. This study investigated the physicochemical properties and bioflocculating activity of the polar residue of partitioned extract (PRPE) of Telfairia occidentalis leaf. The bioflocculating activity of the extract was evaluated for optimum dosage, pH, temperature, and metal ion using Kaolin clay suspension; the optimum activities obtained were used in wastewater treatment. The optimum flocculating activity of the PRPE was obtained at the dose of 1 mg/mL, pH of 4, the temperature of 50°C, and divalent cation (Ca2+). The physicochemical characteristics of removal of turbidity, biochemical oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids (TSS) and heavy metals were determined before and after treatment. Upon treatment of two different domestic wastewaters (DW1 & DW2), the physicochemical parameters were reduced except for nitrate and turbidity, which increased for DW2. The bioflocculant displayed the highest activity in DW1 with turbidity removal of 74%, TSS removal of 48%, nitrate removal of 24%, BOD and COD removal of 87.5% and 50% respectively. Heavy metals were also removed effectively in DW1 compared to DW2. The FTIR characterization revealed the presence of primary amine (N-H), cyclic alkene (C=C), phenol (O-H), sulfoxide (S=O) and, halo compound (C-Br) groups present in the bioflocculant which are essential as they promote the flocculation process. The findings from this study attest to the ability of PRPE of Telfairia occidentalis to act as a flocculant.

Bio-Characterization and Liquid Chromatography-Mass Spectrometry Analysis of Exopolysaccharides in Biofilm-Producing Cyanobacteria Isolated from Soil Crust: Exploring the Potential of Microalgal Biomolecules.

Exopolysaccharide-producing cyanobacterial strains in biological soil crusts are described, in addition to their chemical properties and antioxidant and flocculation activities. The EPSs from Pudukkottai blackish biological soil crusts (PBBSCs) showed significant amounts of total soluble proteins (0.1687 mg/mL) and carbohydrates (0.8056 mg/mL) compared with the Ariyalur blackish biological soil crusts (ABBSCs). LC-MS analysis of the cyanobacterial polysaccharides revealed the presence of natural sugars such as ribose and glucose/mannose, and uronic acids. The FTIR spectrum showed specific peak for OH and -NH stretching, C-H stretching, and carboxylic acids as the dominant groups in EPS. The in vitro DPPH assay of EPSs from PBBSCs showed 74.3% scavenging activity. Furthermore, the reducing power was determined to be 0.59 ata 500 mg/mL concentration, respectively. The extracted EPSs from the biological soil crust flocculated Kaolin clay suspension maximum at 500 mg/mL. Consequently, the cyanobacterial strain and exopolysaccharide characterization from the sacred forest's biological soil crust were analyzed for their bioactive potential, bio-crust diversity, and distribution.

Isolation of Biofilm-Bioflocculant Producing Bacteria from Palm Oil Mill Effluent

A variety of flocculants have been used to treat wastewater by agglomerating various colloidal substances and cells. Due to the adverse effects and high cost of conventional flocculants, bioflocculant which are originally produced by microorganisms are gaining attention. Therefore, this study aimed to identify the biofilm-bioflocculant-producing bacteria which was isolated from palm oil mill effluent in Johor, Malaysia. The isolated bacteria were identified by their colony morphology, Gram-staining and 16S rRNA gene sequence analysis. All isolates were subjected to bioflocculant assay with kaolin clay suspension as a model of wastewater to assess the flocculation efficiency of the bacterial bioflocculants. Two different isolates were successfully identified as Gram-negative bacteria Stenotrophomonas koreensis TR6-01 and Alishewanella agri BL06. S. koreensis TR6-01 shows the highest flocculating activity at 82.79%, followed by A. agri BL06 with 78.52%, respectively. The strongest biofilm producer was shown by S. koreensis TR6-01 and thus, indicates good candidate for future wastewater treatment technology.

Effect of High Solid Concentration on Friction in a Transitional and Turbulent Flow of Bioliquid Suspension

Some suspensions in nature have a complex structure and demonstrate a yield shear stress and a non-linear relationship between the shear rate and the shear stress. Kaolin clay suspension is such an example in engineering, whereas in nature it is blood. This study represents an innovative approach to simulate bioliquid flow, similar to that of blood when the solid concentration is high. The objective of this study is to examine the influence of high solid concentration of bioliquid, similar to blood, on energy losses and velocity profiles in turbulent and transitional flow in a narrow tube. Using the analogy between the suspension of kaolin clay and blood, the physical model and the mathematical model were formulated. The mathematical model comprises continuity and time-averaged momentum equations, a two-equation turbulence model for low Reynolds numbers, and a specially developed wall damping function, as such suspensions demonstrate the damping of turbulence. Experimental data on blood rheology for solid concentrations equal to 43% and 70% by volume, gathered from the literature, were used to establish a rheological model. The results of the simulations indicated that an increase of solid concentration in bioliquid suspension from 43% to 70% causes an increase in wall shear stress to approximately 10% and 6% for transitional and turbulent flow, respectively, and changes in velocity profiles. Such simulations are important if an inserted stent or a chemical additive to the bioliquid suspension is considered, as they can influence the shear stress. The results of the simulations are presented in graphs, discussed, and conclusions are formulated.

Production of Bioflocculant through Fermentation of Spoilt Orange Juice with Bacillus spp Isolated from Sediment of Local Clay Pot

The biodegradable and non-toxic Bioflocculants have attracted considerable interest as alternative to non-biodegradable chemical flocculants. However, the cost of fermentation media for bioflocculant production and low flocculation efficiency is a major challenge. In this study, we grow Bacillus spp isolated from sediment of local clay pot on spoilt orange juice to produce bioflocculant. The culture supernatant of the bacilli grown on spoilt orange juice were screen for bioflocculant production using Jar test method and Kaolin clay suspension as model wastewater. The effect of pH and temperature on the bioflocculant production were also studied. The effect of cations on bioflocculation rate of the bioflocculant produced were tested via hybridization of the bioflocculant with the cations. The bioflocculation efficiency of the bioflocculant on sample wastewaters were also determined. The bacilli isolated initially had flocculation rate between 31.1±1.6 % to 76.4±1.2% when cultured on screening media. Bioflocculation rate peaked to 77.9% at 40 oC while the lowest flocculation rate (55.41%) was obtained at 25 oC. The optimum bioflocculant production (about 78%) was recorded at pH 6 – 7 while the highest bioflocculant production (84.2%) was achieved at 96th hour of incubation. Na+ and Fe3+ had serious inhibitory effect on the bioflocculant while K+, Ca2+, Mg2+ and Al3+ had less or no effect on the bioflocculant. The bioflocculant had up to 77.7% and 64.5 % on Kitchen wastewater and aquaculture wastewater. This study reveals the potential for utilization of spoilt orange juice as fermentable substrate for bioflocculant production especially if the fermentation conditions and flocculation parameters are well optimized.

Effects of Viscosity on Submerged Membrane Microfiltration Systems.

Submerged microfiltration has a wide range of applications in water and wastewater treatment. Membrane fouling is a major problem, resulting in a severe decline in flux, high energy consumption and frequent membrane cleaning and replacement. The effect of viscosity was not previously studied under controlled conditions to relate it to the air scour. Hence, this study investigated the effect of viscosity on membrane fouling during the operation of submerged membrane microfiltration by adding predetermined amounts of glycerol to a kaolin clay suspension. The addition of glycerol increased the viscosity (from 0.001 to 0.003 Pa·s), resulting in a 3-fold higher transmembrane pressure (TMP) development. An increased airflow (air scour) rate by 3 fold (from 0.6 m3/m2/h to 1.8 m3/m2/h), reduced TMP development by 65%. Membrane fouling quickly developed during the initial stage of microfiltration operation. Therefore, special precautions to control fouling during the early stages of filtration could significantly enhance the operation of the microfilter. Higher airflow caused a reduction in average specific cake resistance, whereas higher viscosity increased this value.

Ultrasound-assisted carboxymethylation of LignoForce Kraft lignin to produce biodispersants

Softwood contains up to 40 wt% of lignin, which makes it the most abundant polyphenolic biopolymer on earth. The applications of Kraft lignin, because of its poor solubility, are not as numerous as other water-soluble lignin derivatives, such as lignosulfonates. We investigated the ultrasound-assisted carboxymethylation of two softwood LignoForce Kraft lignins in sodium hydroxide with sodium chloroacetate (SCA) as the carboxylate group donor to yield a water-soluble product. Thermogravimetric analyzer, gel permeation chromatography, and Fourier-transformed infrared spectroscopy characterized the physico-chemical properties of the carboxymethylated lignins. A photometric dispersion analyzer determined the ability of the carboxymethylated lignin to disperse kaolin clay aqueous suspensions. A SCA/lignin ratio of 12 and ultrasound at 20 W and 20 kHz yielded carboxymethylated lignins with a dispersion ability comparable to dioctyl sulfosuccinate sodium salt, a common dispersant. Ultrasound intensified the process by reducing the reaction time from 4 h (conventional process) to 30 min.

Antagonistic Activity Against Pathogenic Vibrio Isolates of Bioflocculant-Producing Bacteria Isolated from Shrimp Ponds

<b>Background and Objectives:</b> Biofloc culture system has been used in aquaculture as an effective technology for water treatment due to many advantages of being biodegradable and environmentally friendly. This study aims to isolate bioflocculant-producing bacteria antagonistic to pathogenic <i>Vibrio</i> species from Pacific white shrimp ponds in Thua Thien Hue, Vietnam. <b>Materials and Methods:</b> <i>Vibrio</i> isolates were isolated by screening on medium with and without antibiotics. The resistance of <i>Vibrio</i> to antimicrobial agents was assessed by Minimum Inhibitory Concentration (MIC). Bioflocs formed in shrimp cultures were used to screen bioflocculant-producing bacteria. The identification of bacteria was performed by 16S rRNA sequencing. The flocculating activity was measured by a test with kaolin clay suspension. To evaluate the antagonistic activity against <i>Vibrio</i> isolates, an agar well diffusion assay was used. <b>Results:</b> The screening results have found that <i>Vibrio</i> isolates such as <i>V. parahaemolyticus</i> KS02 and <i>V. alginolyticus</i> KS08 from shrimp ponds can be resistant to many antibiotics with the highest resistance rate up to 66.49%. Four bioflocculant-producing isolates were obtained and identified as <i>Bacillus</i> species. Among them, <i>Bacillus velezensis </i>B9 when grown in YPG medium supplemented with 3% sucrose and 0.7% peptone had the highest bioflocculation with an activity of 49.2%. Two isolates of <i>B. subtilis</i> B2 and <i>Bacillus</i> sp. B6 had quite strong antagonistic activities against vibriosis shown in the zones of inhibition on the assay plates with diameters of about 20 mm. <b>Conclusion:</b> The present study has found some <i>Bacillus</i> isolates had bioflocculant-producing efficiency and inhibited pathogenic <i>Vibrio</i> bacteria. These <i>Bacillus</i> isolates will potentially be used as inoculum for bioflocculation to improve shrimp production.

Bioflocculants Produced by Bacterial Strains Isolated from Palm Oil Mill Effluent for Application in the Removal of Eriochrome Black T Dye from Water.

Four strains of bioflocculant-producing bacteria were isolated from a palm oil mill effluent (POME). The four bacterial strains were identified as Pseudomonas alcaliphila (B1), Pseudomonas oleovorans (B2), Pseudomonas chengduensis (B3), and Bacillus nitratireducens (B4) by molecular identification. Among the four bacterial strains, Bacillus nitratireducens (B4) achieved the highest flocculating activity (49.15%) towards kaolin clay suspension after eight hours of cultivation time and was selected for further studies. The optimum conditions for Eriochrome Black T (EBT) flocculation regarding initial pH, type of cation, and B4 dosage were determined to be pH 2, Ca2⁺ cations, and a dosage of 250 mL/L of nutrient broth containing B4. Under these conditions, above 90% of EBT dye removal was attained. Fourier transform infrared spectroscopic (FT-IR) analysis of the bioflocculant revealed the presence of hydroxyl, alkyl, carboxyl, and amino groups. This bioflocculant was demonstrated to possess a good flocculating activity, being a promissory, low-cost, harmless, and environmentally friendly alternative for the treatment of effluents contaminated with dyes.

Valorization of glycerol/ethanol-rich wastewater to bioflocculants: recovery, properties, and performance.

Microbial extracellular polymeric substances (EPS) were produced in two membrane bioreactors, each separately treating fresh and saline synthetic wastewater (consisting of glycerol and ethanol), with the purpose of applying them as sustainable bioflocculants. The reactors were operated under nitrogen-rich (COD/N ratios of 5 and 20) and limited (COD/N ratios of 60 and 100) conditions. Under both conditions, high COD removal efficiencies of 87-96% were achieved. However, nitrogen limitation enhanced EPS production, particularly the polysaccharide fraction. The maximum EPS recovery (g EPS-COD/g CODinfluent) from the fresh wastewater was 54% and 36% recovery was obtained from the saline (30 g NaCl/L) wastewater. The biopolymers had molecular weights up to 2.1 MDa and anionic charge densities of 2.3-4.7 meq/g at pH 7. Using kaolin clay suspensions, high flocculation efficiencies of 85-92% turbidity removal were achieved at EPS dosages below 0.5 mg/g clay. Interestingly, EPS produced under saline conditions proved to be better flocculants in a saline environment than the corresponding freshwater EPS in the same environment. The results demonstrate the potential of glycerol/ethanol-rich wastewater, namely biodiesel/ethanol industrial wastewater, as suitable substrates to produce EPS as effective bioflocculants.

Effect of salt solutions on coagulation performance of Moringa stenopetala and Maerua subcordata for turbid water treatment

The objective of this study is to improve the turbidity removal efficiency of Moringa stenopetala (Baker f.) Cufod and Maerua subcordata (Gilg.) DeWolf using various salt solutions. For this purpose, different coagulant solutions were obtained from solutions of NaCl, NH4Cl and KNO3 in different concentrations (0.01, 0.1, 0.5, 1, and 1.5 M) and deionized water. The coagulation activity of the extracts was measured in synthetic water made of a kaolin clay suspension. The turbidity removal efficiency was tested using spectrophotometric-based assays. The result of the study indicated that at the optimum dose of 2 µg/mL, 4 µg/mL using 0.5 and 1.5 M of NaCl and NH4Cl salts respectively. Extracts from M. stenopetala coagulated highly turbid water within 0.5 to 1 h. However, M. subcordata extracted with the same salt types showed lower turbidity removal after 0.5 to 1 h settling time. With increasing contact time especially after 3 h, both extracts of salts and deionized water of both the plant coagulants performed as efficient as alum achieving nearly 95% reduction of highly turbid water. Extraction of natural coagulants using salt solutions improve the coagulation efficiency of the plant species. With further optimization, coagulants from M. stenopetala and M. subcordata can be used on wider scale water treatment technologies.

Characterization of Marine Bioflocculant-producing Bacteria Isolated From Biofloc of Pacific Whiteleg Shrimp, Litopenaeus vannamei Culture Ponds

Characterization of marine bioflocculant-producing bacteria isolated from bioflocs of Pacific whiteleg shrimp, Litopenaeus vannamei culture ponds was prompted to explore the bacteria that enhanced bioflocculation process in aquaculture wastewater treatment. Certain marine bacteria were potentially secreted extracellular polymeric substances (EPS) which response to the physiological stress encountered in the natural environment that can act as bioflocculants. This study aimed to identify marine bioflocculant-producing bacteria isolated from biofloc; to evaluate their flocculating activities; and to characterize their protein in EPS. Phenotypic and genotypic identification of the bacteria including morphological and molecular approaches were employed, while their flocculating activities were examined via Kaolin clay suspension method and statistically analyzed. The EPS that acted as bioflocculants were extracted using cold ethanol precipitation method. Protein concentration was determined by Bradford assay and protein profiling was finally completed with Sodium Dodecyl Sulfate Polyacrylamide Gel Electrophoresis (SDS-PAGE) method. Six species of marine bacteria known as Halomonas venusta, Bacillus cereus, Bacillus subtilis, Bacillus pumilus, Nitratireductor aquimarinus and Pseudoalteromonas sp. were successfully identified as bioflocculant-producing bacteria. The highest flocculating activity was exhibited by Bacillus cereus at 93%, while Halomonas venusta showed the lowest record at 59%. All bioflocculant -producing bacteria species showed different protein concentration that ranged between 1.377 μg/mL to 1.455 μg/mL. Several protein bands with different molecular weight that ranged between 16 kDa to 100 kDa were observed. This study revealed that all the identified bacteria species have high potential characteristics to initiate aquaculture wastewater treatment and may play important roles in bioflocculation process.

Flocculation behaviour of bioflocculant produced from chicken viscera

The flocculation performance of bioflocculant produced by Aspergillus flavus S44-1 grown on chicken viscera hydrolysate was investigated. The investigations were carried out using jar testing and kaolin clay suspension as model wastewater. The bioflocculant yielded a minimum of 83.1% efficiency in flocculating 2-12 g L-1 kaolin clay suspension over a wide temperature range (4-80 °C) and functioned maximally at neutral pH. The bioflocculant significantly flocculated different suspended particles such as activated carbon (92%), soil solid (94.8%), and algae (69.4%) at varying concentrations. Bridging mediated by cation is suggested as the main mechanism of flocculation by the present bioflocculant.

Alcalase enzyme treatment affects egg incubation and larval quality in pikeperch (Sander lucioperca)

Although egg de-adhesion has been the subject of research in pikeperch of late, the possible effect of this technological procedure on larval viability under intensive rearing conditions has not yet been evaluated. The aim of the present study was to evaluate the effect of the Alcalase enzyme on egg incubation and larviculture success compared to a commonly used procedure with milk and kaolin clay suspension. Preliminary research was conducted in order to find the minimal exposure time of eggs in Alcalase enzyme solution for the total elimination of adhesiveness. Further on, stripped eggs from three females were divided into two equal portions, and each portion was treated according to the abovementioned procedures. Efficiency of the procedures was evaluated and compared through egg incubation and larviculture. Alcalase-treated eggs exhibited significantly shorter incubation time (121 ± 12 h vs. 157 ± 10 h), hatching period (16 ± 7 h vs. 48 ± 21 h) and lower embryo survival (82.5 ± 2.4% vs. 87.7 ± 1.4%) with a significantly higher hatching rate (98.5 ± 1.0% vs. 72.0 ± 35.3 %). The larviculture yielded significantly lower production efficacy in eggs treated with Alcalase manifested as the share of larvae with an inflated swim bladder in the total number of stocked eggs (5.8 ± 2.4%) compared to larvae hatched in eggs treated with milk and kaolin (20.1 ± 11.9%). The Alcalase enzyme treatment reduced the incubation time and diminished the larval performance; therefore, its application in eggs of pikeperch should be reconsidered.

Flocculation performance of anionic starch in oil sand tailings.

A series of carboxymethyl starches (CMSs), with various degrees of substitution from 0.1 to 0.79, were synthesized and selected as a model to study the feasibility of using natural polymers as flocculants for oil sand tailings treatment. The flocculation performance of modified CMS in kaolin clay suspensions and oil sand tailings was evaluated in terms of settling rate, solids content, capillary suction time, and specific resistance to filtration of the sediment phase. It was found that the synthesized CMS effectively accelerates settling of kaolin suspensions and oil sand fine tailings, thus demonstrating the feasibility of this application.

Screening for Bioflocculant-Producing Bacteria from the Marine Environment of Sodwana Bay, South Africa

Abstract Flocculants are chemicals that mediate flocculation process, by aggregating colloids from suspension to form floc. Chemical flocculants are hazardous to the environment, which inform the search for safer and eco-friendly alternatives from microorganisms. Bacterial strains were isolated from water and sediment samples collected from Sodwana Bay, South Africa, and physiological properties of the bacterial strains were observed. Flocculation test using kaolin clay suspension was done on all isolates and the ones that showed flocculating activity were identified molecularly using 16 rRNA gene sequence analysis. Forty marine bacteria isolates were gotten from sediments and water samples collected from Sodwana Bay. Most of the isolates exhibited a range of colony pigmentation (pink, creamy, yellow, and white). After purification of individual isolates, they were screened for their potential to produce bioflocculant. The result revealed that isolates marked SOD3, SOD10, SOD12, SOD26, SOD27, SOD28, SOD32, SOD33 and SOD34 produced bioflocculants as shown by the flocculating activities from their crude extract. All these isolates showed good flocculation of kaolin clay suspension above 60% (flocculating activity) except SOD12. These bioflocculant producing isolates were identified as Pseudoalteromonas sp, Alcaligenes faecalis, Bacillus subtilis, Bacillus cereus, Bacillus stratosphericus. The results showed Sodwana Bay, South Africa as a reservoir of bacteria with potential to produce flocculants. However, further studies on the optimisation of culture conditions for bioflocculant production, extraction, characterisation and application of isolates is on the way to underscore the biotechnological importance of these microbes as producers of substitutes to harmful chemical flocculants commonly used in water and wastewater treatment.

Bioflocculant production from Streptomyces platensis and its potential for river and waste water treatment.

A bacterium isolated from Sterkfontein dam was confirmed to produce bioflocculant with excellent flocculation activity. The 16S rDNA nucleotide sequence analyses revealed the bacteria to have 99% similarity to Streptomyces platensis strain HBUM174787 and the sequence was deposited in the Genbank as Streptomyces platensis with accession number FJ 486385.1. Culture conditions for optimal production of the bioflocculant included glucose as a sole carbon source, resulting in flocculating activity of 90%. Other optimal conditions included: peptone as nitrogen source; presence of Mg2+ as cations and inoculum size of 1.0% (v/v) at neutral pH of 7. Optimum dose of the purified bioflocculant for the clarification of 4 g/L kaolin clay suspension at neutral pH was 0.2 mg/mL. Energy Dispersive X-ray analysis confirmed elemental composition of the purified bioflocculant in mass proportion (%w/w): carbon (21.41), oxygen (35.59), sulphur (26.16), nitrogen (0.62) and potassium (7.48). Fourier Transform Infrared Spectroscopy (FTIR) indicated the presence of hydroxyl, carboxyl, methoxyl and amino group in the bioflocculant. The bioflocculant produced by S. platensis removed chemical oxygen demand (COD) in river water and meat processing wastewater at efficiencies of 63.1 and 46.6% respectively and reduced their turbidity by 84.3 and 75.6% respectively. The high flocculating rate and removal efficiencies displayed by S. platensis suggests its industrial application in wastewater treatment.

Influence of the type of aqueous sodium silicate on the stabilization and rheology of kaolin clay suspensions

To avoid agglomeration and sedimentation of grains, ceramic slurries should be modified by stabilizers in order to increase the electrostatic interactions between the dispersed particles. In this study we present the spectral analysis of aqueous sodium silicates obtained by different synthesis methods and their influence on the rheological properties of kaolin based slurries. Infrared and Raman spectra can be used to describe the structure of silicate structural units present in aqueous sodium silicates. It was confirmed that the best stabilization results possess aqueous sodium silicates of the silicate moduli of about 2 and the optimal concentration of the used fluidizer is 0.3wt% to the kaolin clay dry mass. One of the most important conclusions is that the synthesis method of the fluidizer has no significant effect on its stabilization properties but used medium does create adequate stabilization mechanism depending on the silicate structures present in the sodium silicate solution.