Jaw Width Research Articles

Effects of Tool Shape on Facial Contour Reduction in Middle-aged Women in Their 50s and 60s

Purpose: This study aimed to evaluate the effect of tool-based facial care on face size reduction in middle-aged women and to analyze the differences in effectiveness by tool form.Methods: The study was conducted with 14 middle-aged women in their 50s and 60s who volunteered to participate at a P aesthetic shop in Gangnam-gu, Seoul. The participants were divided into three groups: Group A (11 participants) received treatment with a meridian-scraping-shaped tool, Group B (4 participants) received treatment with a plain tool, and Group C (3 participants) was untreated. Group A underwent treatment twice a week for a total of six sessions with the meridian-scraping-shaped tool. After a year, some participants from Group A were reassigned to Group B for further care with the plain tool. Face sizes were compared over time by measuring 14 variables, including length, width, and jawline length. Data were analyzed using Kruskal–Wallis and Friedman tests.Results: In Group A, there was a significant reduction in most facial areas, particularly in face width and jaw width (p<0.001). In contrast, Group B showed significant reductions in only some areas, while no changes were observed in the control group. This study found that the meridian-scraping-shaped tool was more effective in reducing facial contours than the plain tool.Conclusion: This study demonstrated that the meridian-scraping-shaped tool, which applies the leverage principle, was more effective in reducing facial contours in middle-aged women compared to the plain tool. The shape of the tool has a critical impact on treatment outcomes.

Endoscopic hand suturing using a modified through-the-scope needle holder for mucosal closure after colorectal endoscopic submucosal dissection: Prospective multicenter study (with video).

Endoscopic hand suturing (EHS) is a novel technique for closing a mucosal defect after endoscopic submucosal dissection (ESD). We investigated the technical feasibility of colorectal EHS using a modified flexible through-the-scope needle holder. This was a prospective multicenter study conducted at two referral centers between June 2022 and April 2023. This study included colorectal neoplasms 20-50 mm in size located in the sigmoid colon or rectum. A modified flexible through-the-scope needle holder, with an increased jaw width to facilitate needle grasping, was used for colorectal EHS. The primary end-points were sustained closure rate on second-look endoscopy (SLE) performed on postoperative days 3-4 and suturing time for colorectal EHS. Secondary end-points included complete closure rate and delayed adverse events. We enrolled 20 colorectal neoplasms in 20 patients, including four patients receiving antithrombotic agents. The tumor location was as follows: lower rectum (n = 8), upper rectum (n = 2), rectosigmoid colon (n = 4), and sigmoid colon (n = 6), and the median mucosal defect size was 37 mm (range, 21-65 mm). The complete closure rate was 90% (18/20 [95% confidence interval (CI) 68.3-98.8%]), and the median suturing time was 49 min (range, 23-92 min [95% CI 35-68 min]). Sustained closure rate on SLE was 85% (17/20 [95% CI 62.1-96.8%]). No delayed adverse events were observed. EHS demonstrated a high sustained closure rate. Given the long suturing time and technical difficulty, EHS should be reserved for cases with a high risk of delayed adverse events.

Application of multi-criteria decision-making method to choose rice harvester in Vietnam

Vietnam’s rice production accounts for a large proportion of rice production in region and the world. The income from rice production accounts for a large proportion of the Country’s total GDP (Gross Domestic Product). Therefore, the investment in machines for rice processing is being interested in this Country. Many types of rice processing machine need to be equipped such as rice harvesters, peelers, separators, etc. In which, the rice harvester is identified as the first type of machine that needs to be equipped for a rice processing line. However, with a large number of rice harvesters available on the market with many different parameters (specifications, selling price) will make it difficult for customers to choose the best rice harvester. In this paper, the selection of rice harvester is carried out using MCDM (Multi-Criteria Decision-Making) method. Five types of rice harvester were offered for ranking, including two drain-type rice harvesters and three bagged-type rice harvesters. Eighteen criteria were used to evaluate each machine type. Those eighteen criteria including: type of machine, length/ width/ height/ and weight of machine, length of the sprocket and width of the sprocket, maximum moving speed of the machine when working in slow-moving mode/ average-moving mode/ and fast-moving mode, ground clearance, cutting jaw width, cutting width, lowest cutting height, the maximum cutting height, the width of rake reel, the container capacity, and cost. To determine the weights for the criteria, three different methods have been applied. FUCA (Faire Un Choix Adéquat) was selected as a multi-criteria decision-making method to rank alternatives. The results identified one best drain-type rice harvester and one best bagged-type rice harvester

Notes on the pattern of head size in the Philippine Spotted Flying Lizard, Draco spilopterus (Weigmann, 1834), within Luzon Biogeographic Region, Philippines

Sexual head dimorphism is a condition where head morphology of male and female of the same species differ, which provides an additional way to recognise sex for species identification. Fifty four adult Philippine Spotted Flying Lizards, Draco spilopterus, were examined from four populations in the Luzon Island, Philippines to assess whether head morphometry can drive sexual dimorphism. We identified the sex and measured five morphometric measurements of the head (jaw length, jaw width, head height, head length, head width) and snout-vent length. A univariate analysis of the five morphometric measurements showed clear sexual dimorphism. Considering all individuals, female heads are significantly larger than those of males (all p-values < 0.05). We also revealed major differences in head size amongst the four populations due to their geographical location and habitat differences.

Relation between Maximum Oral Muscle Pressure and Dentoalveolar Characteristics in Patients with Cleft Lip and/or Palate: A Prospective Comparative Study.

Perioral muscle function, which influences maxillofacial growth and tooth position, can be affected in patients with oral clefts due to their inherent anatomical characteristics and the multiple surgical corrections performed. This research aims to (1) compare the maximum oral muscle pressure of subjects with and without isolated cleft palate (CP) or unilateral cleft lip and palate (UCLP), (2) investigate its influence on their dentoalveolar characteristics, and (3) investigate the influence of functional habits on the maximum oral muscle pressure in patients with and without cleft. Subjects with and without CP and UCLP seeking treatment at the Department of Orthodontics of University Hospitals Leuven between January 2021 and August 2022 were invited to participate. The Iowa Oral Performance Instrument (IOPI) was used to measure their maximum tongue, lip, and cheek pressure. An imbalance score was calculated to express the relationship between tongue and lip pressure. Upper and lower intercanine (ICD) and intermolar distance (IMD) were measured on 3D digital dental casts, and the presence of functional habits was reported by the patients. The data were analyzed with multivariable linear models, correcting for age and gender. 44 subjects with CP or UCLP (mean age: 12.00 years) and 104 non-affected patients (mean age: 11.13 years) were included. No significant differences in maximum oral muscle pressure or imbalance score were detected between controls and clefts or between cleft types. Significantly smaller upper ICDs and larger upper and lower IMDs were found in patients with clefts. A significant difference between controls and clefts was found in the relationship between oral muscle pressure and transversal jaw width. In cleft patients, the higher the maximum tongue pressure, the wider the upper and lower IMD, the higher the lip pressure, the smaller the upper and lower ICD and IMD, and the higher the imbalance score, the larger the upper and lower IMD and lower ICD. An imbalance favoring the tongue was found in cleft patients. The influence of functional habits on the maximum oral muscle pressure was not statistically different between clefts and controls. Patients with CP or UCLP did not present reduced maximum oral muscle pressure compared with patients without a cleft. In cleft patients, tongue pressure was consistently greater than lip pressure, and those who presented a larger maxillary width presented systematically higher imbalance scores (favoring the tongue) than those with narrow maxillae. Therefore, the influence of slow maxillary expansion on maximum oral muscle pressure in cleft patients should not be underestimated.

Effect of Pre-Surgical Orthopedic Treatment on Hard and Soft Tissue Morphology in Infants with Cleft Lip and Palate

The frequency of cleft lip and palate births in Japan is approximately 0.146%. The study aimed to compare the effects of NAM on restoring nasal morphology and improving extraoral nasal morphology in children with cleft lip and palate in the first stage of treatment using 3D imaging and oral model analysis. The subjects were five infants (37.6 ± 14.4 days old) with unilateral cleft lip and palate. The images taken with the 3D analyzer and oral model used for constructing the NAM at the first examination (baseline) and at the completion of the pre-surgical orthodontic treatment (157.8 ± 37.8 days old) were analyzed. The cleft distance was measured at the upper, middle, and lower points on the 3D images. On the model, the cleft jaw width at the maximum protrusion of the healthy and affected sides of the alveolar bone was measured. After the pre-surgical orthopedic treatment, the measured value on the model decreased significantly by a mean of 8.3 mm from baseline, and the cleft lip width narrowed by an average of 2.8 ± 2.2, 4.3 ± 2.3, and 3.0 ± 2.8 mm at the upper, middle, and lower points of the cleft, respectively. Pre-surgical orthopedic treatment using NAM can help narrow the width of the cleft jaw and lip. The sample size is stated at the study limit in the paper.

Comparison of Jaw Mode and Field Width for Left-Breast Cancer Using TomoDirect Three-Dimensional Conformal Radiation Therapy: A Phantom Study.

It is very important to use effective parameters in the treatment plan of breast cancer patients in TomoDirect (TD)-three-dimensional conformal radiation therapy (TD-3DCRT). The objective of this study was to compare the radiation treatment plans to the parameters (jaw width and jaw mode) of TD-3DCRT for left-breast cancer. This study was conducted using the phantom, the jaw mode (fixed and dynamic) and field width (2.5 cm and 5.0 cm) were controlled to compare the TD-3DCRT treatment plans. There was small difference in the conformity index (CI) and homogeneity index (HI) values for target according to the jaw mode for each field width. As a result of observation in terms of dose, treatment time and unnecessary damage to surrounding normal organs could be minimized when dynamic jaw with a field width of 5.0 cm was used. In conclusion, we verified that the use of dynamic jaws and 5.0 cm field width was effective in left-breast cancer radiotherapy plan using TD-3DCRT.

Selection in the city: Rapid and fine-scale evolution of urban eastern water dragons.

Oceanic archipelagos have long been treated as a Petri dish for studies of evolutionary and ecological processes. Like archipelagos, cities exhibit similar patterns and processes, such as the rapid phenotypic divergence of a species between urban and nonurban environments. However, on a local scale, cities can be highly heterogenous, where geographically close populations can experience dramatically different environmental conditions. Nevertheless, we are yet to understand the evolutionary and ecological implications for populations spread across a heterogenous cityscape. To address this, we compared neutral genetic divergence to quantitative trait divergence within three native riparian and four city park populations of an iconic urban adapter, the eastern water dragon. We demonstrated that selection is likely acting to drive divergence of snout-vent length and jaw width across native riparian populations that are geographically isolated and across city park populations that are geographically close yet isolated by urbanization. City park populations as close as 0.9km exhibited signs of selection-driven divergence to the same extent as native riparian populations isolated by up to 114.5km. These findings suggest that local adaptation may be occurring over exceptionally small geographic and temporal scales within a single metropolis, demonstrating that city parks can act as archipelagos for the study of rapid evolution.

Oral Dimensions Related to Bit Size in Adult Horses and Ponies.

A bit that fits is essential for horse welfare and good communication with the ridden, driven or led horses. The bit causes pressure on the sensitive structures of the horse mouth. The aim of this study was to investigate variation in oral dimensions related to bit fit in adult horses and ponies and to evaluate bit fit by comparing oral dimensions with the currently used bit size selected by the horse owner. The study population consisted of 554 horses and ponies, 308 geldings and 246 mares, age 5-29 years, presented for routine dental care. Oral dimensions: mouth width, distance between upper and lower jaw, tongue thickness and lower jaw width, were measured under sedation. Oral dimensions were compared with the most used bit mouthpiece size presented to the researcher by the owner. Bit type and material were recorded. All oral dimensions in adult horses and ponies varied by breed and sex. Mouth width and distance between upper and lower jaw correlated positively with age. Oral dimensions were significantly smaller in mares than in geldings. In coldblood Finnhorses, oral dimensions were greater than in other breeds; in ponies they were smaller. The majority of the oral dimensions correlated positively with each other. Lower jaw width did not correlate with tongue thickness. It was common to use a bit that did not fit the horse: the bit was either too short or too long (over 10 mm longer) compared to mouth width, compressed the tongue in between the upper and lower jaw, or the center link was of similar length compared to lower jaw width, thus possibly causing pressure points or a nutcracker effect on the bars of the lower jaw. Horses had, on average, space for a 14 mm thick bit without compressing the tongue. The results of this study can aid in choosing a horse bit size that fits correctly and does not cause discomfort. It is recommended that the fit of the bit is evaluated regularly as the horse ages.

Anatomical localisation of the maxillary nerve with the use of computed tomography to aid nerve block placement in dogs.

The maxillary block is a commonly used anaesthetic technique in dogs; however, no universal recommendations for the best method to perform this block exist. Differences between using this block in brachycephalic and non-brachycephalic breeds have not been examined. This study compared the position of the maxillary nerve using CT in brachycephalic and non-brachycephalic dogs. Forty CT images of the heads of dogs of varying conformation were analysed. The distances and angles to the maxillary nerve from the injection site within the oral cavity were measured. If present in the same plane, the distance to the eye was measured. Measurements of jaw width and length were taken to ascertain if they correlated to the distance to the maxillary nerve from the oral cavity. There was no difference in angle between brachycephalic and non-brachycephalic dogs; however, the distance between nerve and injection point in brachycephalic dogs was generally greater. A regression equation relating maxillary nerve depth to jaw width was found. The eye was more likely to be in the plane of injection if the dog was non-brachycephalic. The discovered relationship between jaw width and maxillary nerve depth may allow more accurate injections to be made.

Surgical Versus Nonsurgical Lower Face Contouring: Layperson Perceptions of Attractiveness and Personality Traits.

Traditional approaches to lower face contouring involve ostectomy of the mandibular angle or body. More recently, nonsurgical techniques have gained popularity, including neurotoxin injection to the masseter muscle. This study aims to evaluate layperson perceptions of patient attractiveness and personality traits following lower face contouring using either surgical or nonsurgical treatment. In this survey study distributed via Amazon's Mechanical Turk, respondents viewed a series of 14 patient images obtained in clinic before and after surgical or nonsurgical jawline slimming, or without any facial aesthetic procedure. Respondents rated changes in attractiveness and personality trait scores between the before and after image (score: -50 to 50, with 50 representing the greatest posttreatment increase and 0 representing no change). We used descriptive statistics and multivariable regression to determine differences in respondent ratings between patient images. A total of 415 respondents (mean age 38 years, 50.6% female) successfully completed the survey. Compared to patients who underwent nonsurgical treatment, those who received surgery had significantly greater increases in perceived attractiveness (P < 0.001), femininity (P < 0.001), friendliness (P < 0.001), intelligence (P < 0.001), trustworthiness (P < 0.001), financial wealthiness (P < 0.001), dominance (P < 0.01), and self-esteem (P < 0.001). Gonial angles increased and jaw widths decreased following both surgical and nonsurgical intervention, with no statistically significant difference between treatment groups. From the layperson perspective, surgical compared to nonsurgical jawline contouring offers greater improvements in perceptions of attractiveness and favorable personality traits.

Facial Anthropometry Measurements Using Three-Dimensional Stereophotogrammetry Analysis Among Nigerians.

This study aimed to determine the normative facial anthropometry measurement among Nigerians using three-dimensional stereophotogrammetry analysis.This study was carried out in Lagos, Nigeria over a period of 3 years. The sample population was Nigerians of diverse ethnic groups, age 16 and above with no history of congenital or acquired craniofacial deformities.A total of 452 subjects participated in the study with 56.2% males and 43.8% females. Most of the participants were between the ages of 25 to 49 (54.4%), 40.7% were less than 25 years of age and only 4.4% were more than 50 years old. The mean body mass index (BMI) for males was 22.7 and 23.4 for females. Mean values of upper facial height, midfacial height, lower facial height, intercanthal distance, interpupillary distance, upper facial width, and lower facial width are 69.13 ± 5.91, 49.89 ± 3.56, 67.85 ± 6.12, 35.19 ± 3.20, 67.04 ± 3.67, 139.43 ± 7.11, and 124.29 ± 9.72 mm, respectively. The upper facial height, commissure width, upper lip length, and lower jaw width were significantly affected by age, while the BMI of an individual was a determinant of the interpupillary distance, facial width, and lower jaw width.This study demonstrated that there was a statistically significant difference in the facial dimensions of males when compared to females across all ages among the study population. The authors also observed that age and BMI are significant predictors of variations in some of the measurements.

Ecomorphological variation of pumpkinseed sunfish (Lepomis gibbosus) in exposed littoral shoreline habitat of a postglacial lake

The spatial distribution of phenotypes across the environment has important consequences for population biology, community ecology, and evolution. Populations of pumpkinseed sunfish (Centrarchidae: Lepomis gibbosus) have repeatedly diversified between the littoral and pelagic habitats of postglacial lakes, but we know little about the natural history of pumpkinseed in exposed rocky littoral shorelines relative to those in sheltered littoral bays. We addressed three general questions with respect to the pumpkinseed found in exposed littoral shoreline relative to conspecifics from sheltered littoral and pelagic habitats: (1) What phenotype is associated with the exposed littoral shoreline? (2) What is their summer diet? (3) What is the condition of pumpkinseed from exposed littoral shorelines? Reference sheltered littoral and pelagic pumpkinseed were phenotypically and ecologically differentiated in a pattern consistent with several previous studies; pelagic pumpkinseed had deeper bodies, smaller jaws (narrower oral jaw width and shorter premaxilla), and a more terminal mouth, as well as having more zooplankton and less insects in their diet. Pumpkinseed from exposed shoreline habitat had jaw and body shape phenotypes, as well as diets, that were similar to sheltered littoral reference pumpkinseed in some traits while others were more intermediate. We found no evidence that differences between habitats in phenotype or diet translated into differences in body condition at the end of the summer growing season, suggesting that exposed littoral shorelines are unlikely to be an ecological ‘sink’ habitat. This study expands our understanding of the spatial distributions of polyphenic pumpkinseed, and their habitat use in postglacial lakes.

Influence of Modulation Factor on Treatment Plan Quality and Irradiation Time in Hippocampus-Sparing Whole-Brain Radiotherapy Using Tomotherapy.

Objectives: Hippocampus-sparing whole-brain radiotherapy (HS-WBRT) using tomotherapy is known to provide a better dose distribution than volumetric-modulated arc therapy but requires an extended irradiation time. The present study aimed to investigate whether irradiation time can be shortened by reducing the modulation factor (MF) without losing the target dose distribution. Methods: Using six tilted computed tomography images in the head area, the planning target volume (PTV) and hippocampal doses, and the irradiation time was investigated with a jaw width of 1 cm, a pitch of 0.200, and the MF changed from 3.0 to 2.6, 2.2, 1.8, and 1.4. Results: No significant changes in the PTV or hippocampus were found with MF in the range from 3.0 to 1.8, but marked deterioration was found with that of 1.4. The irradiation time showed a linear relationship with the MF within the range from 3.0 to 1.8, with 1334, 1158, 986, and 817 s at modulation factors of 3.0, 2.6, 2.2, and 1.8, respectively. However, when the MF was 1.4, the irradiation time was 808 s. Conclusions: When HS-WBRT is performed with a tilted body position and a jaw width of 1 cm, with a MF of 1.8, a favorable balance between dose parameters and irradiation time is achieved, whereas with a MF of 1.4, the quality of the radiotherapy plan deteriorates, and the irradiation time is approximately the same as that with a MF of 1.8.

Sexual Dimorphism and Feeding Ecology of the Black-bellied Bunchgrass Lizard Sceloporus aeneus (Squamata: Phrynosomatidae) in Central Mexico

Morphology and resource use have a significant influence on lizard population dynamics. In this study, sexual dimorphism and feeding ecology were assessed in a population of Sceloporus aeneus from central Mexico. Sexual dimorphism was recorded, with males being larger than females in several morphological characteristics, such as jaw width, femur length, tibia length, and forearm length, but not snout–vent length (SVL) or jaw length, which were similar in both sexes. The stomach contents analysis indicated an insectivorous diet composed of 11 prey categories, of which females consumed 11 and males consumed 9. Low values of feeding niche breadth were found, as well as high overlap between sexes and seasons. For the whole population, adult preys of the family Formicidae and orders Coleoptera and Hemiptera showed the highest values of food importance and abundance. A higher volume of stomach contents was recorded during the dry season than the wet season in both females and males. Results showed a pattern of sexual dimorphism similar to that of other species of the genus Sceloporus, but different from those of other populations of the same species. Morphological variation in jaw length and width seems to be related to food resources use because, in spite of the high similarity in the diet between sexes, the volume of stomach contents was not correlated with SVL in females. These findings suggest a constant consumption of food that is subsequently invested in reproduction. Further studies analyzing morphology and diet and their effect on reproductive characteristics such as clutch size, eggs mass, and volume are needed among populations of this species. The results obtained in this research could help explain the differences and similarities previously reported on the morphology and reproductive characteristics for S. aeneus and other species of the S. scalaris group.

Intraspecific dental variations in the deep-sea shark Etmopterus spinax and their significance in the fossil record

An important character on several taxonomic levels for shark identification is the tooth morphology. Sharks show a variety of highly specialized dentitions reflecting adaptations to their feeding habits. Intraspecific variation of tooth morphology such as sexual or ontogenetic dimorphism is poorly known in many species, even though tooth morphology plays a decisive role in the characterization of the fossil record of sharks, which comprises mostly fossil teeth. Here we analyzed the dentition of 40 jaws of the Velvet Belly Lantern Shark Etmopterus spinax and identified ontogenetic and sexual dimorphic characters such as total number of teeth, number of upper teeth, cusplet numbers in upper jaw teeth and width of lower jaw teeth. Dimorphic characters may reduce intraspecific competition for food, as E. spinax segregates by sex and size and may allow for identifying the male sex. The lower jaw tooth height, a sexually non-dimorphic character, was used to re-calculate the total length of specimens, which represents the first such approach for a squaliform shark. Results derived from the extant E. spinax are subsequently applied to fossil Etmopterus sp. teeth (Miocene) to gain individual information such as sex or size, but also characterize the extinct population from the excavation site by a size distribution profile in comparison to data from extant populations. This approach indicates the presence of multiple ontogenetic stages in the extinct population.

Diet overlap of three sympatric species of Leptodactylus Fitzinger (Anura: Leptodactylidae) in a Protected area in the Brazilian Amazon

Closely related species are often similar in morphological and ecological characters, which maylead them to compete when occurring in sympatry. In this sense, we analyzed trophic nicheoverlap among three Leptodactylus species, Leptodactylus macrosternum, L. fuscus and L. aff.podicipinus, in a floodplain environment from a Protected area in the Brazilian Amazon. Inaddition, we applied Network and Non-metric multidimensional scaling (NMDS) analysis. Wefound 18 prey categories, most of them belonging to Arthropoda (94.4%). Coleoptera, Isoptera,Diptera and Hymenoptera were the most abundant prey on the diet shared among the threespecies. The rarefaction curve of prey richness did not reach an asymptote, indicating that thediet composition may be higher by increase the sample. The species presented a broad nichebreadth, however, no relationship between jaw width and prey size were found in the studiedspecies. Despite the line-up in NMDS with Bray Curtis Index indicated that the species’ diets aresimilar with few different attributes, with some food items overlapping among species (Stress=0.00201), the niche overlap between the pair of species was not high (Ojk < 0.7). Therefore, webelieve interactions such as competition would be better demonstrated addressing data on preyavailability and microhabitat use patterns.

Comparison of Different Combinations of Irradiation Mode and Jaw Width in Helical Tomotherapy for Nasopharyngeal Carcinoma.

Purpose: To aid in the selection of a suitable combination of irradiation mode and jaw width in helical tomotherapy (HT) for the treatment of nasopharyngeal carcinoma (NPC).Materials and Methods: Twenty patients with NPC who underwent radiotherapy were retrospectively selected. Four plans using a jaw width of 2.5 or 5-cm in dynamic jaw (DJ) or fix jaw (FJ) modes for irradiation were designed (2.5DJ, 2.5FJ, 5.0DJ, and 5.0FJ). The dose parameters of planning target volume (PTV) and organs at risk (OARs) of the plans were compared and analyzed, as well as the beam on time (BOT) and monitor unit (MU). The plans in each group were ranked by scoring the doses received by the OARs and the superity was assessed in combination with the planned BOT and MU.Results: The prescribed dose coverage of PTV met the clinical requirements for all plans in the four groups. The groups using a 2.5-cm jaw width or a DJ mode provided better protection to most OARs, particularly for those at the longitudinal edges of the PTV (P < 0.05). The 2.5DJ group had the best ranking for OAR-dose, followed by the 2.5FJ and 5.0DJ groups with a same score. The BOT and MU of the groups using a 5.0-cm jaw width reduced nearly 45% comparing to those of the 2.5-cm jaw groups.Conclusion: 2.5DJ has the best dose distribution, while 5.0DJ has satisfactory dose distribution and less BOT and MU that related to the leakage dose. Both 2.5DJ or 5DJ were recommended for HT treatment plan for NPC based on the center workload.

Sexual dimorphism in size and shape among populations of the lizard Sceloporus variabilis (Squamata: Phrynosomatidae)

Sexual dimorphism in lizards is determined by ecological and environmental factors. Broadly distributed species may show variation in patterns of sexual dimorphism toward either sex, as well as exhibiting variation in morphological dimensions. In the present study, sexual dimorphism in size and shape attributes was evaluated in three populations of the lizard Sceloporus variabilis from different environments in Mexico. We evaluated the size attributes of 10 morphological variables: snout-vent length (SVL), tibia length (TL), femur length (FeL), forearm length (FoL), interaxial distance (ID), head length (HL), head width (HW), head height (HH), jaw length (JL), and jaw width (JW). We also evaluated the attributes of shape (relative dimensions of the 10 morphological variables). In the size attribute, sexual dimorphism was found, with males being larger than females. In the case of shape, sexual dimorphism was found, with the females being larger in relative dimensions of ID and JW. Also, the males showed larger relative dimensions in TL, FeL and FoL. Differences were found between populations in the dimension of the variables analyzed in each sex. The pattern in size can be explained by sexual selection, where the males of each population maintain larger dimensions to compete for territory and access to females. In shape, females can be favored if they have larger relative ID and JW, as it promotes maintenance of clutch sizes, and use of microhabitats and different consumption of prey types than males. In the case of males, relative dimensions of TL, FeL and FoL may be functioning as important traits for escape from predators. The present study shows the importance of incorporating size and shape variables into analyses of sexual dimorphism among populations of a single species with a wide distribution. These types of studies help to identify the causes that promote sexual dimorphism, as well as the degree of difference among populations that inhabit different environments.

Exposure to Metalaxyl Disturbs the Skeletal Development of Zebrafish Embryos.

Metalaxyl is broadly applied in agriculture to control peronosporales-caused diseases in plant. To investigate the toxic effects, zebrafish embryos were exposed to metalaxyl at 5, 50 and 500 ng/L for 72 h, the development of larvae were assessed. A significant decreased survival rate, body length, hatching rate (48 h post-fertilization), and a significant increased spinal curvature rate were observed in the 500 ng/L treatment. The lengths of lower jaw, upper jaw and hyomandibular were significantly decreased in the 5, 50 and 500 ng/L groups; while the lower jaw width was significantly increased in the 500 ng/L group. The lengths of palatoquadrate, ceratohyal and ethmoid plate were reduced. Though cyp26a1 mRNA levels showed no significant change, the transcription of bmp2b (in the 500 ng/L group), ihh (in the 50 and 500 ng/L groups), shh (in the 5, 50 and 500 ng/L groups) were significantly up-regulated, which may be related to the abnormal development of the skeleton.