Ivrea Body Research Articles

Ambient‐Noise Wave‐Equation Tomography of the Alps and Ligurian‐Provence Basin

AbstractTaking benefit of the AlpArray temporary network and permanent networks in W‐Europe, we construct a 3‐D onshore‐offshore velocity model of the crust and upper mantle using ambient‐noise wave‐equation tomography. We use a frequency‐dependent phase traveltime misfit function in an iterative procedure to refine a recent 3‐D Vs model computed from a Bayesian two‐step ambient noise tomography. Observed waveforms consist of vertical‐component noise correlations from 600 broadband stations in the Alps and surroundings, including ocean‐bottom seismometers in the Ligurian sea. We perform 3‐D inversion in the 5–85 s period range. In the long‐period band (20–85 s), an elastic approximation is considered, while in the 5–20 s band, we account for the effect of water layer in the Ligurian sea by applying a fluid‐solid coupling for acoustic‐elastic waveform simulations. The resulting Vs model enhances the shape and contrast of velocity structures, accounting for 3‐D and finite‐frequency effects. It emphasizes the deep sediments of the Ligurian‐Provence basin and focuses on the low‐velocity anomalies of the crust in the W‐Alps. We obtain a high‐resolution Moho depth map covering the Alps and Ligurian sea. In the W‐Alps, this map confirms the deepening of the European crust following the subduction beneath Adria and the existence of major structures such as the Moho jump beneath the external crystalline massifs and shallow depths associated with the Ivrea Body. It provides further constraints on the deep structure beneath the Ligurian‐Provence basin, regarding the lateral and along‐strike crustal‐thickness variations from the oceanic domain to the conjugate margins.

Assessing the reliability of local earthquake tomography for crustal imaging: 30 yr of records in the Western Alps as a case study

SUMMARY Local earthquake tomography (LET) is a popular method for inverting arrival time picks of local-regional earthquakes for P- and S-wave velocities and hypocentre parameters in seismically active regions. This popularity is due to some robust and well-documented open-source codes that are sometimes used as black boxes. The availability of a very complete time-pick database on the Western Alps gives us a chance to thoroughly investigate the influence of the numerous processes and parameters involved when applying LET to the Western Alps or similar targets. From a subset of high-quality manual picks (1989–2014), we compute preliminary P and S velocity models that are used to predict arrival times for later events and allow the selected fusion of picks downloaded from different seismological agencies for a consistent 33-yr database (1989–2021). Different model reconstructions are proposed by selecting different subsets of the arrival time data set. Aside data input into the LET, influence of initial stratified or 3-D velocity models and related initial earthquake locations is investigated together with grid discretization, Laplacian smoothing and damping parameters in the standard penalty approach commonly used by LET codes. These numerical parameters account for the expected limited resolution of seismic waves due to their finite-frequency content. Parameter selection is handled by the user, whereas frequency impact is only implicit in the onset picks. The earthquake distribution allows a reconstruction down to 40-km depth over an area of ∼500 × 500 km2. Robust features such as the high-velocity Ivrea body anomaly, and a deep low-velocity anomaly associated with crustal thickening underneath the mountain belt survive whatever the tomography strategy and parameters. Finally, a comparison with previous LET reconstructions suggests that finite-frequency content be explicitly incorporated through wave equation tomography to improve spatial resolution. This would fully exploit observables collected from seismograms, albeit with a significant increase in computer costs.

The Moho reflectivity of the subduction beneath the Southwestern Alps from ambient seismic noise autocorrelations

SUMMARY The Western Alps shows a complex crustal organization due to the subduction of the European Plate beneath the Adriatic Plate and exhumation of the mantle wedge. The lithospheric structure of the Western Alps, that may hold significance for understanding orogenic processes and evolution, has been the subject of many geophysical studies, but the Moho profile remains unclear and this has led to controversies about the depth and extent of the European Plate beneath the Adriatic Plate. With the goal of retrieving detailed information on crustal constitution, we use autocorrelation of seismic ambient noise as a tool to map the body wave reflectivity structure at the subduction zone under the southwestern Alps. We use data recorded by the China–Italy–France Alps (CIFALPS) seismic transect, that includes 45 stations located approximately 5–10 km apart along a profile crossing the Alpine continental subduction in the Western Alps. We analyse the data set in four different frequency bands between 0.09 and 2 Hz. We automatically pick the arrival time of the Moho reflection in the second derivative of the envelope of the autocorrelation stack using prior Moho information. The 0.5–1 Hz frequency band mostly gives the best result due to the clear changes in reflectivity along the waveforms of the autocorrelation stacks after the picked arrival times of the Moho reflections. We find spatial coherence between 18 and 23 km depth in the western portion of the profile, indicating relatively homogeneous crustal rocks, and highly reflective structure under the central mountain range, due to the existence of a highly faulted zone. The very thin crust and the underlying mantle wedge known as the Ivrea body show instead high transparency to seismic waves and absence of reflections. The subduction profile of the European Plate shows a steep trend as compared to previous studies. We discuss autocorrelation stacks and Moho depths obtained from the arrival times of the picked reflectivity change in comparison with previous studies to validate the different reflection structures. Stacked ambient noise autocorrelations reliably image varied crustal properties and reflectivity structures in the highly heterogeneous region of the southwestern Alps.

Insights Into the Origin and Deformation Style of the Continental Moho: A Case-Study From the Western Alps (Italy).

Several hypotheses on the origin of the continental Moho are still debated and multiple mechanisms may contribute to its formation. Here, we present quantitative estimation of the seismic properties and anisotropy of the crust‐mantle transition in the Western Alps where an example of newly formed (proto)‐continental Moho is unusually shallow. We make use of teleseismic P‐to‐S converted‐waves recorded by stations deployed on top of the Ivrea Body (IB), a volume of possibly serpentinized mantle peridotite below exhumed (ultra‐)high pressure crustal rocks. The IB has been mapped by gravity, magnetic, active and passive seismic surveys suggesting an extremely shallow Moho. We demonstrate that the P‐to‐S converted waves propagating through this region display coupled features: (a) they record expected presence of strong seismic velocity contrast at shallow depth as due to the lower crustal and upper mantle transition; (b) they are decomposed due to anisotropic properties of rocks involved. The proto‐continental Moho is recognized as an increase in S‐wave velocity (∼0.4–1 km/s) at shallow depths of 5–10 km. The presence of anisotropy within the IB and overlying crustal rocks is evidenced by back‐azimuthal dependence of the amplitude of P‐to‐S phases. The strength of anisotropy is ∼−14% on average pointing out the presence of metamorphosed/hydrated material (e.g., serpentinite) below the Moho. Anisotropic directions are consistent across Moho in both crust and upper mantle. The similarity of the anisotropy parameters between crust and upper mantle suggests they have been shaped by the same deformation event.

3D modeling of crustal shortening influenced by along-strike lithological changes: Implications for continental collision in the Western and Central Alps

The European Alps show major along-strike variations in the partitioning of crustal shortening between the upper and the lower plates, either explained by lateral variation in temperature and rheology, or by along-strike changes in crustal-scale lithology. Here, we present the first 3D thermomechanical geodynamic model to test the potential impact of along-strike lithological (and associated rheological) changes and lateral temperature variations on crustal shortening during continental collision in the Western and Central Alps. Numerical modeling results suggest a minor impact of lateral thermal variations and lithological changes in the lower plate for the Alpine orogeny. In contrast, lateral lithological changes in the upper plate structure, defined by the presence of the buried Ivrea Body in the Western Alps, should play a major role in determining the present-day architecture of the Alpine belt. Our models suggest that the Ivrea Body acts as a strong, rigid buttress constraining crustal shortening to the lower plate, promoting the formation of the Jura fold-and-thrust belt, and supporting the higher surface elevation observed in the Western Alps. On the other hand, in the Central Alps where the Ivrea Body is absent, much broader distribution of crustal shortening results in lower surface elevation. Numerical modeling results also suggest that crustal shortening in the Central Alps is focused within the upper plate during the final stages of continental collision, favored by the indentation of thickened upper crust of the lower plate, and by detachment of the Adriatic upper crust from the underlying lithosphere.

Lithospheric architecture of the South-Western Alps revealed by multiparameter teleseismic full-waveform inversion

The Western Alps, although being intensively investigated, remains elusive when it comes to determining its lithospheric structure. New inferences on the latter are important for the understanding of processes and mechanisms of orogeny needed to unravel the dynamic evolution of the Alps. This situation led to the deployment of the CIFALPS temporary experiment, conducted to address the lack of seismological data amenable to high-resolution seismic imaging of the crust and the upper mantle. We perform a 3-D isotropic full-waveform inversion (FWI) of nine teleseismic events recorded by the CIFALPS experiment to infer 3-D models of both density and P- and S-wave velocities of the Alpine lithosphere. Here, by FWI is meant the inversion of the full seismograms including phase and amplitude effects within a time window following the first arrival up to a frequency of 0.2 Hz. We show that the application of the FWI at the lithospheric scale is able to generate images of the lithosphere with unprecedented resolution and can furnish a reliable density model of the upper lithosphere. In the shallowest part of the crust, we retrieve the shape of the fast/dense Ivrea body anomaly and detect the low velocities of the Po and SE France sedimentary basins. The geometry of the Ivrea body as revealed by our density model is consistent with the Bouguer anomaly. A sharp Moho transition is followed from the external part (30 km depth) to the internal part of the Alps (70–80 km depth), giving clear evidence of a continental subduction event during the formation of the Alpine Belt. A low-velocity zone in the lower lithosphere of the S-wave velocity model supports the hypothesis of a slab detachment in the western part of the Alps that is followed by asthenospheric upwelling. The application of FWI to teleseismic data helps to fill the gap of resolution between traditional imaging techniques, and enables integrated interpretations of both upper and lower lithospheric structures.

Crustal structure of the Alps as seen by attenuation tomography

We develop a simple tomographic approach exploiting the decay rate of coda waves to map the absorption properties of the crust in a region delimited approximately by the Rhine Graben to the North, the Apennines to the South, the Massif Central to the West and the Dinarides to the East. Our dataset comprises 40 000 coda records of about 2000 weak to moderate crustal earthquakes, with magnitude ranging from 2.8 to 6 and recorded by broad-band, accelerometric and short-period stations. After proper choice of a coda window minimizing the effects of variable epicentral distances, we measure the coda quality factor Qc in five non-overlapping frequency windows covering the 1–32 Hz band for all available source station pairs. These measurements are subsequently converted into maps of absorption quality factor (Qi) using a linearized, approximate relation between Qc and Qi. In practice the following procedure is applied in each frequency band: (1) we divide the target region into 40×40 km cells; (2) for each source-station pair, we assign the measured Qc value to each pixel intercepted by the direct ray path; (3) the results are averaged over all paths and subsequently smoothed with a 3×3 pixels moving window. Our approach is consistent with the high sensitivity of Qc to the value of Qi between source and station.Our tomographic approach reveals strong lateral variations of absorption with length scales ranging from 100 km to 1000 km. At low frequency (∼1 Hz), the correlation with the surface geology is clear, Cenozoic and Mesozoic sedimentary basins (resp. crystalline massifs) being recognized as high (resp. low)-absorption regions. Furthermore the Qi map delineates finer geological features such as the Ivrea Body, the Rhône Valley, or felsic intrusions in the central Alps. At high-frequency (>16 Hz), only the thickest Cenozoic sedimentary deposits show up as high-attenuation regions and a north/south dichotomy is apparent in the absorption structure. The limit between low-attenuation regions to the North and high-attenuation region to the South correlates geographically with the location of the Periadriatic Lineament (PL), a major late-alpine crustal- to lithospheric-scale structure. Furthermore, the attenuation structure seems to prolong the PL to the West along a line marked by large historical earthquakes. The Apennines orogenic belts exhibit a distinct frequency behavior, with high attenuation at low-frequency and low-attenuation at high-frequency. Low-frequency absorption may likely be explained by the relatively thick cover of Cenozoic sedimentary materials, as well as by shallow geothermal activity. We hypothesize that the frequency dependence of the attenuation structure, in particular in the Apennines, is caused by a change of the wavefield composition which accentuates the sensitivity of the coda to the deeper parts of the medium as the frequency increases.

Geometry and impact of transpressional faulting in polyphasic metamorphic orogenic belts: the Viù Deformation Zone (inner Western Alps)

This article describes the geometry and structural architecture of the Viù Deformation Zone (VDZ), a brittle-ductile to brittle structure affecting the metamorphic units of the inner Western Alps, and its role in modifying the pre-existing syn-metamorphic structural setting. The VDZ reactivates and displaces the contact between two different oceanic units, the Lanzo Ultramafic Complex and the Lower Susa–Lanzo Valleys Unit, characterized by polyphase syn-metamorphic deformation. It shows a strike-slip duplex geometry, constituted by N–S reverse-dextral faults linked by NW–SE antithetical sinistral-reverse faults, and represents a contractional step-over zone along a N–S regional dextral-reverse structure, the Col del Lis-Trana Deformation Zone. Formation of these transpressional structures steepened the Lanzo Ultramafic Complex during the last stages of its exhumation. The 3D geometry of the VDZ was strongly controlled by the reactivation of pre-existing structures, such as the buried western edge of the Ivrea body and metamorphic foliations. Brittle reactivation also induced block rotation along the VDZ, causing anomalous kinematic relations between the VDZ-associated faults. This study, hence, shows that in metamorphic orogens the mechanisms generating strike-slip duplexes may be different from those classically provided by the literature, with brittle reactivation and block rotation strongly prevailing on newly formed faults. In such orogens, moreover, rotations induced by transpressional faulting may sometimes be mistaken for steep syn-metamorphic shear zones. Underestimating the effects of later brittle deformation and associated rotations may cause erroneous interpretations of the tectonic evolution of orogens.

Long-lasting transcurrent tectonics in SW Alps evidenced by Neogene to present-day stress fields

The SW Alps are an active orogen undergoing intra-mountainous extension and peripheral compression. We discuss the significance of syn-orogenic extension based on a comparison of paleo-stress derived from fault-slip data inversion reflecting the long-term (< 12 Ma) evolution of SW Alps and the present-day stress state obtained by the inversion of the focal mechanisms of the last 30-years seismicity. The resulting stress states of long-term and active tectonic regimes are in good agreement, showing that extension accompanies strike-slip and reverse faulting in the southern part of the belt. The extensional deformation regime is limited to specific tectonic domains that can be interpreted as ‘transitional’ between pure strike-slip segments where the deformation concentrates on inherited ductile shear zones that were formed between 32° and 20 Ma ago. We thus propose that the extensional deformation in the SW Alps can be defined as a local deformation in a pull-apart type domain (High Durance - Jausiers area) or above slowly exhuming internal massifs (Dora Maira - Ivrea Body) along a curved boundary between the slowly rotating Apulian block and the relatively immobile Western Europe. The transcurrent fault system merges into a compressional front along the Mediterranean – Ligurian coast mainly to the east of San Remo. • SW Alps undergo neogene-present intra-mountain extension and peripheral compression. • Comparison of Paleo-stress (fault-slip data) and current stress (focal mechanisms) • Results from both techniques are in good agreement. • Extension is limited to specific tectonic domains between pure strike-slip segments. • The transcurrent system merges into a compressional front along the Ligurian coast.

Finite‐difference P wave travel time seismic tomography of the crust and uppermost mantle in the Italian region

We present a 3‐D P wave velocity model of the crust and shallowest mantle under the Italian region, that includes a revised Moho depth map, obtained by regional seismic travel time tomography. We invert 191,850 Pn and Pg wave arrival times from 6850 earthquakes that occurred within the region from 1988 to 2007, recorded by 264 permanent seismic stations. We adopt a high‐resolution linear B‐spline model representation, with 0.1° horizontal and 2 km vertical grid spacing, and an accurate finite‐difference forward calculation scheme. Our nonlinear iterative inversion process uses the recent European reference 3‐D crustal model EPcrust as a priori information. Our resulting model shows two arcs of relatively low velocity in the crust running along both the Alps and the Apennines, underlying the collision belts between plates. Beneath the Western Alps we detect the presence of the Ivrea body, denoted by a strong high P wave velocity anomaly. We also map the Moho discontinuity resulting from the inversion, imaged as the relatively sharp transition between crust and mantle, where P wave velocity steps up to values larger than 8 km/s. This simple condition yields an image quite in agreement with previous studies that use explicit representations for the discontinuity. We find a complex lithospheric structure characterized by shallower Moho close by the Tyrrhenian Sea, intermediate depth along the Adriatic coast, and deepest Moho under the two mountain belts.

Short-lived, fast erosional exhumation of the internal western Alps during the late early Oligocene: Constraints from geothermochronology of pro- and retro-side foreland basin sediments

Apatite and zircon fission-track analysis and single zircon fission-track–U/Pb double dating of Oligocene to Miocene pro- and retro-side foreland basin sedimentary rocks provide evidence for short-lived but fast erosional exhumation of at least 1.5–2 km/m.y. in the internal western Alps between ca. 30 and 28 Ma. This period of fast erosion is seen as a result of rapid surface uplift coupled with increasing orographic precipitation during this phase of orogenesis. Surface uplift may have been caused and sustained by different plate-tectonic processes such as a change in convergence direction, intermediate-depth slab breakoff, and emplacement of the Ivrea body during continental collision. The occurrence of contemporaneous volcanic activity on the pro-side of the western Alps on the subducting European plate between ca. 36 Ma and 30 Ma is seen in connection with slab rollback of the Apennine slab and upwelling of hot mantle material beneath the western Alps. Single zircon double dating shows that the exhumational signal in the detrital thermochronologic data is not compromised by volcanically derived zircons, as volcanic grains can be identified and removed from the zircon fission-track data set to obtain a pure exhumational signal. The signal of fast exhumation is observed in the zircon fission-track data of the pro-side foreland basin and in the apatite fission-track data and published 40Ar-39Ar data in the retro-side foreland basin. During late Oligocene times, erosion rates slowed down to rates similar to present-day erosion rates in the western Alps.

Tracing the Oligocene-Miocene Evolution of the Western Alps Drainage Divide with Pebble Petrology, Geochemistry, and Raman Spectroscopy of Foreland Basin Deposits

The formation of the western Alps topography is the result of continental collision between the Apulian and European plates. In this study, we trace the Early Oligocene to Early Miocene development of topography and the position of the drainage divide in the southern western Alps by analyzing the erosion products preserved in the pro-side (Montmaur and Barrême) and retro-side (Torino hills) foreland basins of this orogen. Using petrologic and geochemical analyses of basalt pebbles and Raman spectroscopy of serpentine sand grains and pebbles, we identify source lithologies, which are not easily detected with more commonly used detrital thermochronology. Lower Oligocene sediments of the pro-side foreland basin contain numerous basalt pebbles that share strong geochemical similarities with the Chenaillet obducted ophiolite (Montgenèvre massif). Other ophiolite-suite derived clasts, e.g., radiolarite or serpentinite appear widely in pro- and retro-side foreland sediments since about 30 Ma. This suggests a wider distribution of Chenaillet-type obducted ophiolite rocks in the western Alps during the Oligocene, but the exact locations, except for the Chenaillet, are unknown. Raman analysis on serpentine grains and pebbles from the retro-side foreland basin deposits documents a systematic trend from antigorite (high-grade metamorphic source rocks) to lizardite (low-grade metamorphic source rock) from the Early Oligocene to the Early Miocene. This trend is attributed to a westward growth of the paleo-Dora Riparia drainage basin in the southern western Alps. Ophiolite erosion and drainage divide shift were caused by the topographic evolution of the western Alps, which we suggest to be linked to the shift in convergence direction between the Apulian and Eurasian plates from N–S to E–W and the presence of the so-called Ivrea body mantle splinter acting as a vertical indenter beneath the western Alps at that time. The drainage patterns of the paleo-Durance and paleo-Doria Riparia Rivers seem to have remained stable since the Early Miocene. In comparison to the central Alps, the drainage divide shift in the southern western Alps occurred earlier than in the central Alps, but in both locations the trend from an internal to a more external position is the same.

Combining controlled-source seismology and local earthquake tomography to derive a 3-D crustal model of the western Alpine region

SUMMARY We present a newly developed approach of combining controlled-source seismology (CSS) and local earthquake tomography (LET) data to obtain a new 3-D crustal model of the western Alpine region. Our approach combines either data by taking into account the strengths of the individual seismic methods. Our western Alpine 3-D model is primarily based on a welldefined Moho, constrained by CSS and LET data, and includes smooth lateral variations in seismic velocities mainly constrained by LET data, but locally also by CSS data. The consistent combination of results from the two different seismic methods is feasible due to LET Moho elements, as defined by characteristic P-wave velocities and their uncertainty estimates. These uncertainty estimates are based on values of the diagonal element of the resolution matrix, absolute P-wave velocities that are typical for crust and mantle and a specific velocity gradient across the Moho discontinuity. Finally, our definition of LET Moho elements and their uncertainties is validated by comparisons of highest quality Moho results from both methods coinciding in 353 localities. Our model clearly shows three Moho surfaces, being Europe, Adria and Liguria as well as major tectonic structures like suture zones and the high-velocity Ivrea body. In general, it is in a good agreement with previous studies. The biggest differences occur along plate boundaries, where the strong lateral velocity variations arebestresolvedbyLET.DuetothelargernumberofavailableMohoreflectorelementsamore accurate definition of plate boundaries at Moho level is possible and, therefore, new insights in deep lithosphere structures of the Alpine collision zone can be expected. Furthermore, our new 3-D crustal model directly includes a 3-D migrated image of the Ivrea body.

Source tracing of detrital serpentinite in the Oligocene molasse deposits from the western Alps (Barrême basin): implications for relief formation in the internal zone

AbstractWe present the first contribution of tracing the source area of ophiolitic detritus in the Alpine molasse deposits by Raman spectroscopy. The lower Oligocene molasse deposits preserved in the Barrême basin, in the SW foreland of the western Alpine arc, are known for the sudden arrival of the first ‘exotic’ detritus coming from the internal Alpine zones. Among them, the pebbles of serpentinized peridotites have so far not been studied. We show that they only consist of antigorite serpentinite, implying that they originate from erosion of high temperature blueschists. In contrast, the upper Oligocene/lower Miocene molasse shows mixed clasts of serpentine including antigorite and lizardite without any evidence of chrysotile. This suggests that they were derived from a less metamorphosed unit such as the low temperature blueschist unit. Taking into account the sediment transport direction in the basin and the varied metamorphic characteristics of the other ocean-derived detritus, we constrain the lithologic nature of the source zones and the location of the relief zones, identified as the internal Alps, SE of the Pelvoux external crystalline massif. Available structural data andin situthermochronological data allow the reconstruction of the Oligocene to early Miocene collisional geometry of the Palaeogene subduction wedge. This phase corresponds to two major phases of uplift evolving from a single relief zone located above the Ivrea body during early Oligocene times and persisting up to early Miocene times; then during late Oligocene/early Miocene times a second relief zone developed above the Briançonnais zone. At that time, the internal western Alps acquired its double vergency.

Structural and sedimentary records of the Oligocene revolution in the Western Alpine arc

The northwestwards-directed Eocene propagation of the Western Alpine orogen is linked with (1) compressional structures in the basement and the Mesozoic sedimentary cover of the European foreland, well preserved in the External Zone (or Dauphiné Zone) of the Western Alps and (2) tectono-sedimentary features associated with the displacement of the early Tertiary foreland basin. Three major shortening episodes are identified: a pre-Priabonian deformation D1 (N-S shortening), supposedly linked with the Pyrenean-Provence orogeny, and two Alpine shortening events D2 (N- to NW-directed) and D3 (W-directed). The change from D2 to D3, which occurred during early Oligocene time in the Dauphiné zone, is demonstrated by a high obliquity between the trends of the D3 folds and thrusts, which follow the arcuate orogen, and of the D2 structures which are crosscut by them. This change is also recorded in the evolution of the Alpine foreland basins: the flexural basin propagating NW-wards from Eocene to earliest Oligocene shows thin-skinned compressional deformation, with syn-depositional basin-floor tilting and submarine removal of the basin infill above active structures. Locally, a steep submarine slope scar is overlain by kilometric-scale blocks slided NW-wards from the orogenic wedge. The deformations of the basin floor and the associated sedimentary and erosional features are kinematically consistent with D2 in the Dauphiné foreland. Since ∼32Ma, the previously subsiding areas were uplifted and the syntectonic sedimentation shifted westwards. Simultaneously, the paleo-accretionary prism, which developed during the previous, continental subduction stage, was rapidly exhumed during the Oligocene collision stage due to westward indentation by the Adriatic lithosphere, which likely enhanced the relief and erosion rate. The proposed palinspastic restoration takes into account this two-stage evolution, with important northward transport of the distal passive margin fragments (Briançonnais) involved in the accretionnary prism before the formation of the western arc, which now crosscuts the westward termination of the ancient orogen. By early Oligocene, the Ivrea body indentation, which was kinematically linked with the Insubric line activation, initiated the westward escape and the curvature of the arc was progressively acquired, as recorded by southward increasing counter-clockwise rotations in the internal nappes. We propose that the present N-S trend of the Ivrea lithospheric mantle indenter which appears roughly rectilinear at ∼15km depth could be a relict of the western transform boundary of Adria during its northward Eocene drift. The renewed Oligocene Alpine kinematics and the related change in the mode of accomodation of Africa–Europe convergence can be correlated with deep lithospheric causes, i.e. partial detachment of the Tethyan slab and/or a change in motion of the Adria plate, and was enhanced by the E-directed rollback of the eastern Ligurian oceanic domain and the incipient Ligurian rifting.

3-D modelling of Alpine Mohos in Southwestern Alps

SUMMARY We present and discuss a 3-D geometrical model of the Moho topography in the Southwestern Alps. To achieve this objective, we used the potential of 3-D modelling software (i.e. a 3-D GeoModeller) to combine gravity, seismic and seismological constraints in a same and coherent 3-D space. A new regional Bouguer gravity anomaly map of the Southwestern Alps was calculated and filtered to isolate the Moho signature in the Southwestern Alps. Then, two alternative 3-D models were computed with data from the literature based on seismic and seismological constraints. The first one represents an European lithospheric mantle decoupled from the European orogenic crust which is back-thrusted by the Ivrea body whereas the second 3-D model illustrates the subduction of a 20-km-thick piece of lower continental crust, coupled with the European upper mantle, beneath the Ivrea body. According to the geological knowledge of these units we then assigned a density value to each modelled layer and we computed their gravity effects to compare them with the filtered Moho map of the Southwestern Alps. First of all, the significant discrepancies of the Moho gravity signature generated by these two geometrical models reveal that subduction of continental crust is no more active in the present-day configuration of the Southwestern Alps. Therefore, the first 3-D model was refined by a stochastic 3-D gravity inversion. Based on this processing, our investigations confirm the presence of three superposed Mohos in the Southwestern Alps and underline that:

Jura, Alps and the boundary of the Adria subplate

The thin-skinned Jura fold/thrust belt is the frontal part of a thick-skinned late Miocene Alpine nappe. Important late Miocene structures in the Alps that help define this nappe are the External Massifs in the north, the Orobic thrusts and the Piemontese Southern Alps in the south, the Giudicarie–Brenner Line in the east and, more vaguely, the south end of the Belledonne Massif in the west. A bottom boundary compatible with the data is the Brittle–Ductile Transition (BDT). This Jura nappe is separated from the (latest Oligocene)–early Miocene Helvetic nappe system most obviously by the late Miocene Orobic–Giudicarie–Brenner fault complex. In contrast, the distinctive boundary of the early Miocene thick-skinned Helvetic nappe was the Iorio–Tonale Line (IT) in the south, merging into the Piemontese Southern Alps at what may be termed the “Locarno Singularity”–the point of minimum width of the thick-skinned Alps; the northern boundary passed through the Gotthard–and Montblanc Massifs. Motion along the southern boundary was dextrally transpressive, associated with complex strain partitioning patterns. One part of these patterns is the confusing entity comprising the Piemontese Southern Alps and the Lepontine “dome”. The slivers composing the Piemontese Southern Alps are dragged dextrally by the Iorio–Tonale strike–slip at the “Locarno Singularity” and thereby exhibit an important characteristic trait of “exotic terranes” — crustal slivers dragged along strike–slip faults. The Lepontine “dome” around the Locarno Singularity on the north side of the Iorio–Tonale Line displays the characteristics of a backstop in thrust systems as modeled in sandbox experiments. The special boundary functioning as a backstop, compatible with the transpressive kinematics, was the Ivrea body, a strong mafic–ultramafic–granulitic complex which in the early Miocene migrated dextrally along the Iorio–Tonale Line, forcing detachment to descend into the hot middle crust and producing an upsurge of the hot masses. In the late Miocene Jura phase this particular impediment had moved to the west, enabling décollement at the Brittle–Ductile Transition to propagate across the Insubric Line into the Lombardic domain. Large-scale strain partitioning manifestations resemble those of the equally dextrally transpressive southern boundary of the Caribbean plate, in spite of a difference in scales. The foremost of these manifestations are regional right-slip faults slicing through a broad band of contraction, accompanied by collapse basins.

High-resolution 3-DP-wave model of the Alpine crust

The 3-D P-wave velocity structure of the Alpine crust has been determined from local earthquake tomography using a set of high-quality traveltime data. The application of an algorithm combining accurate phase picking with an automated quality assessment allowed the repicking of first arriving P-phases from the original seismograms. The quality and quantity of the repicked phase data used in this study allows the 3-D imaging of large parts of the Alpine lithosphere between 0 and 60 km depth. Our model represents a major improvement in terms of reliability and resolution compared to any previous regional tomographic studies of the Alpine crust. First-order anomalies like crust—mantle boundary (Moho) and the Ivrea body in the Western Alps are well resolved and in good agreement with previous studies. In addition, several (consistent) small-scale anomalies are visible in the tomographic image. A clear continuation of the lower European crust beneath the Adriatic Moho in the Central Alps is not observed in our results. The absence of such a signature may indicate the eclogitization of the subducted European lower crust in the Central Alps. In agreement with previous results, the additional analysis of focal depths in our new 3-D P-wave model shows that all studied earthquakes in the northern foreland have occurred within the European crust. Waveforms and focal depths suggest that at least one of the analysed events south of the Alps is located in the Adriatic mantle.

P wave seismic velocity and Vp/Vs ratio beneath the Italian peninsula from local earthquake tomography

We investigate the P wave velocity structure and the Vp/Vs ratio beneath the Italian peninsula down to 100 and 60 km depth respectively by seismic travel time tomography. We invert data provided by the International Seismological Centre (ISC) (1997–2005), making use of some alternative strategies for the travel time approach in a well constrained and worldwide adopted code (SIMULPS). Resolution for the different layers is discussed and sensitivity analyses are performed through test inversions to explore the resolution characteristics of the model at different spatial scales. The resulting tomographic images provide a detailed sketch of the P wave anomalies, clearly showing, among the other features, the shape of the Ivrea body in the Western Alps, the upwelling of the oceanic crust in the Ligurian Sea and the slab under the Calabrian arc. They are less informative for the Vp/Vs ratio. Nevertheless, some features are very interesting and deserve further investigation like the anomalous decrease of the Vp/Vs ratio under the Ligurian Sea or the variations of the Vp/Vs ratio calculated in the first 10 km depth of the Apenninic region with respect to the lower values of the Alpine region at the same depth. The tomographic cross sections reveal a continuous superposition of two kinds of crusts (transitional over Adriatic) all along the peninsula but do not show any slab, intended as a clear, vertical downgoing high velocity material in either the northern or central Apennines.

Local tomography and focal mechanisms in the south-western Alps: Comparison of methods and tectonic implications

We investigate how focal solutions and hypocenter locations may depend on the ray tracing algorithm and the strategy of velocity inversion. Using arrival times from a temporary seismological network in the south-western Alps, a local earthquake tomography has been performed by Paul et al. [Paul, A., Cattaneo, M., Thouvenot, F., Spallarossa, D., Béthoux, N., and Fréchet, J., 2001. A three-dimensional crustal velocity model of the south-western Alps from local earthquake tomography. J. Geophys. Res. 106, 19367–19390.] with the method developed by Thurber [Thurber, C.H., 1993. Local earthquake tomography: velocity and Vp/Vs-Theory, in Seismic Tomography: Theory and practice, Iyer, H.M., and Irahara eds., Chapman and Hall, New York, 563–583.]. Another inversion of the same data set is performed here using a different tomography code relying on a shooting paraxial method and cubic interpolation of velocities. The resulting images display the same main features, although Thurber's code appears to be more robust in regions with scarce ray coverage and strong velocity contrasts. Concerning hypocenter location in Piemont units, one major result is the concentration of hypocenters at the boundary between the mantle wedge of the Ivrea body and the European crust. Forty-six focal mechanisms are shown that were computed using both the take-off angles in the minimum 1-D model and in the 3-D velocity structures resulting from the two inversions. The sets of focal solutions are very similar, proving the reliability and the coherency of the focal solutions. The widespread extension in the core of the western Alps is confirmed whereas a few compressive solutions are found east of the Piemont units. These results constrain the sharp change of stress tensor and evidence a decoupling of strain beneath the east of Dora Maira massif up to beneath the north of Argentera massif. On a geodynamical point of view seismicity and focal mechanism distribution are compatible with the present day models published for the western Alps, where the major feature is the lithospheric thickening [Schmid, S.M., and Kissling, E., 2000. The arc of the western Alps in the light of geophysical data on deep crustal structure. Tectonics, 19, 62–85.], implying widespread extension in the core of the western Alps [Sue, C., Thouvenot, F., Fréchet, J., and Tricart, P., 1999. Widespread extension in the core of the western Alps revealed by earthquake analysis. J. Geophys. Res., 104, 25611–25622.]. However the existence of compressive events dealing at depth with the boundary of Ivrea body allows to postulate that this geological structure is still tectonically active. Even if field work has not shown this so far, the Insubric line appears to extend toward the south at depth, as a blind fault, and to play a key role in the dynamics of the south-western Alps.