Iridium Probe Research Articles

Photo- and Electrochemical Dual-Responsive Iridium Probe for Saccharide Detection.

Dual detection systems are of interest for rapid, accurate data collection in sensing systems and in vitro testing. We introduce an IrIII complex with a boronic acid receptor site attached to the 2‐phenylpyridine ligand as an ideal probe with photo‐ and electrochemical signals that is sensitive to monosaccharide binding in aqueous solution. The complex displays orange luminescence at 618 nm, which is reduced by 70 and 40 % upon binding of fructose and glucose, respectively. The electro‐chemiluminescent signal of the complex also shows a direct response to monosaccharide binding. The IrIII complex shows the same response upon incorporation into hydrogel matrices as in solution, thus demonstrating the potential of its integration into a device, as a nontoxic, simple‐to‐use tool to observe sugar binding over physiologically relevant pH ranges and saccharide concentrations. Moreover, the complex's luminescence is responsive to monosaccharide presence in cancer cells.

The development of platinum iridium probe for low temperature near-field microscope

The development of platinum iridium probe for low temperature near-field microscope

A viscosity-sensitive iridium(iii) probe for lysosomal microviscosity quantification and blood viscosity detection in diabetic mice.

Abnormal levels of biological viscosity are closely associated with some diseases and malfunction (e.g. cancer, diabetes). Sensitive viscosity probes are of significant importance in disease diagnosis and remain an unmet need. In this research, we present a novel viscosity-sensitive dinuclear Ir(iii) complex (1), which freely rotates and shows weak phosphorescence in a low-viscosity environment, while in viscous media, both the phosphorescence intensity and lifetime are enhanced significantly. 1 can further be applied for phosphorescence lifetime imaging (PLIM) and measure lysosomal microviscosity with high accuracy and reliability. Interestingly, this PLIM property can distinguish between tumorous and nontumorous cells. Importantly, the probe shows much stronger phosphorescence in the fresh blood of diabetic mice than that of normal mice. This work offers a potential efficient probe for diagnosing viscosity related diseases.

A luminescent bimetallic iridium(iii) complex for ratiometric tracking intracellular viscosity.

A luminescent bimetallic iridium probe C10 was developed through a long soft carbon chain linkage to achieve ratiometric detection of viscosity. C10 features high sensitivity and selectivity for viscosity. More importantly, C10 is living cell permeable and can be employed to distinguish cancer cells from normal cells and track viscosity changes during MCF-7 cell apoptosis.

Iridium(III) Luminescent Probe for Detection of the Malarial Protein Biomarker Histidine Rich Protein-II

This work outlines the synthesis of a non-emissive, cyclometalated Ir(III) complex, Ir(ppy)2(H2O)2+ (Ir1), which elicits a rapid, long-lived phosphorescent signal when coordinated to a histidine-containing protein immobilized on the surface of a magnetic particle. Synthesis of Ir1, in high yields,is complete O/N and involves splitting of the parent cyclometalated Ir(III) chloro-bridged dimer into two equivalents of the solvated complex. To confirm specificity, several amino acids were probed for coordination activity when added to the synthesized probe, and only histidine elicited a signal response. Using BNT-II, a branched peptide mimic of the malarial biomarker Histidine Rich Protein II (pfHRP-II), the iridium probe was validated as a tool for HRP-II detection. Quenching effects were noted in the BNT-II/Ir1 titration when compared to L-Histidine/Ir1, but these were attributed to steric hindrance and triplet state quenching. Biolayer interferometry was used to determine real-time kinetics of interaction of Ir1 with BNT-II. Once the system was optimized, the limit of detection of rcHRP-II using the probe was found to be 12.8 nM in solution. When this protein was immobilized on the surface of a 50 µm magnetic agarose particle, the limit of detection was 14.5 nM. The robust signal response of this inorganic probe, as well as its flexibility of use in solution or immobilized on a surface, can lend itself toward a variety of applications, from diagnostic use to imaging.

Iridium(III) Luminescent Probe for Detection of the Malarial Protein Biomarker Histidine Rich Protein-II.

This work outlines the synthesis of a non-emissive, cyclometalated Ir(III) complex, Ir(ppy)2(H2O)2+ (Ir1), which elicits a rapid, long-lived phosphorescent signal when coordinated to a histidine-containing protein immobilized on the surface of a magnetic particle. Synthesis of Ir1, in high yields,is complete O/N and involves splitting of the parent cyclometalated Ir(III) chloro-bridged dimer into two equivalents of the solvated complex.To confirm specificity, several amino acids were probed for coordination activity when added to the synthesized probe, and only histidine elicited a signal response. Using BNT-II, a branched peptide mimic of the malarial biomarker Histidine Rich Protein II (pfHRP-II), the iridium probe was validated as a tool for HRP-II detection. Quenching effects were noted in the BNT-II/Ir1 titration when compared to L-Histidine/Ir1, but these were attributed to steric hindrance and triplet state quenching. Biolayer interferometry was used to determine real-time kinetics of interaction of Ir1 with BNT-II. Once the system was optimized, the limit of detection of rcHRP-II using the probe was found to be 12.8 nM in solution. When this protein was immobilized on the surface of a 50 µm magnetic agarose particle, the limit of detection was 14.5 nM. The robust signal response of this inorganic probe, as well as its flexibility of use in solution or immobilized on a surface, can lend itself toward a variety of applications, from diagnostic use to imaging.

Electron Tunneling Across Hexadecanethiolate Monolayers on Mercury Electrodes: Reorganization Energy, Structure, and Permeability of the Alkane/Water Interface

Measurements of the reorganization energies (λ) and the maximum values of the electron transfer rate constants ( , obtained for −η ≥ 2λ) of two redox probes at monolayer-coated electrodes are used as diagnostic parameters of the location of a probe at the monolayer/solution interface. Kinetics of the electroreduction of IrCl62- and FcCH2N(CH3)32+ at hexadecanethiolate-coated Hg drop electrodes were investigated in a broad range of overpotentials extending to values in excess of the reorganization energies of the two redox probes. Rate vs overpotential data were analyzed in terms of the Marcus−Gerischer formalism to yield the reorganization energies and values. The former show that both probes reside initially in an aqueous environment at the alkane/solution interface. A larger value of for the ferrocene probe was interpreted to indicate its closer approach to the interface. Access of the more strongly hydrated IrCl62- to the interface is more restricted by an interfacial water layer. Gradual expansion of the Hg drop, up to 20% of its initial surface area, has no effect on the magnitude of the reorganization energy obtained for IrCl62-, proving that the iridium probe is located in the aqueous environment outside the alkane monolayer film. In contrast, a more hydrophobic ferrocene probe permeates the alkanethiolate monolayer immediately when even a small expansion of the Hg drop of ca. 2% is attempted.

Brachytherapy with iridium-192 HDR to prevent from restenosis in peripheral arteries. An update.

The use of stents does not appreciably improve restenosis (usually resulting from intimal hyperplasia) as compared to percutaneous transluminal angioplasty (PTA) alone. The development of small-caliber probes for afterloading therapy in the biliary tract allowed us to use these for therapy in the vascular system. Using a special 9 F catheter, exact measurement of the length of the stented vascular segment and of the insertion length of the afterloading probe could be reproducibly performed. We used a Nucletron (Micro) Selectron HDR planning system version 10.10 for exact calculation, monitoring, and control of the afterloading procedure. Our source was iridium 192 (10 Ci) with a diameter of 1.1 mm. The program controls and monitors the insertion and removal of the iridium probe from the source into the special catheter through to the tip, and monitors the irradiation duration. The exposure time was around 200 seconds for a surface dose of 12 Gy. To date, a total of 40 patients have been treated with endovascular afterloading. All patients suffered from clinically relevant reocclusions or restenoses in stented vascular segments of the superficial femoral artery following successful PTA or laser treatment, within 6 to 8 months after the last therapy. In all patients it was possible to perform re-PTA treatment without remaining residual stenoses in the stented region. The additional time required as compared to PTA alone was approximately 45 minutes with most of this time spending for transportation between the cath lab and afterloading room. The follow-up period of the 40 patients ranged from 4 months to 71/2 years. In 33 patients, there was no deterioration of the clinical stage and no restenosis. One patient suffered from an acute thrombosis approximately 3 months after stent implantation, another patient had a stenosis 3 cm above the stented vascular segment 12 months after irradiation treatment. Follow-up examinations have revealed no evidence of nerve lesions following irradiation therapy. The tissue surrounding the artery showed no change following irradiation therapy, either in the CT, color-coded Doppler, endovascular ultrasonic scan or MRI. No complaints of discomfort were reported during or after irradiation. With the exceptions mentioned above, there was no evidence of any complications.

Polycrystalline tungsten and iridium probe tip preparation with a Ga+ focused ion beam

We have used a Ga+ focused ion beam (FIB) milling technique to produce sharp scanning‐probe microscope tips. The FIB procedure employs a roughly 0.2‐μm‐diam 20 keV Ga ion beam vector scanned in an annular pattern across the apex of an electrochemically etched wire. This method usually produces exceptionally sharp conical tips, but occasionally it generates a nearly cylindrical spike at the apex. In this paper, we show examples of the spikes, and we discuss possible mechanisms by which they are produced.

Surface tension and electrocapillary phenomena of yttrium scandium gallium garnet melts

The surface tension σ of the yttrium scandium gallium garnet melt (the melting point is 2150 K) was measured by the method of tearing off the iridium probe from the melt surface. The temperature dependence of σ was determined in a nitrogen atmosphere at 0.6 atm in the range of melt temperatures of 2156 to 2218 K. Experimental data are presented as σ=1456+0.24 ( T-2156) dyn/cm. The measurements at different partial pressures of N 2 and O 2 were carried out at a melt temperature of 2156 K. Furthermore, the influence of electric field on the surface tension of YSGG melt was investigated. Experimental results are presented as dependence of σ versus current density.