Ion-selective Electrode Technique Research Articles

The effects of microplastics on ionoregulatory processes in the gills of freshwater fish and invertebrates: A prospective review

From review of the very few topical studies to date, we conclude that while effects are variable, microplastics can induce direct ionoregulatory disturbances in freshwater fish and invertebrates. However, the intensity depends on microplastic type, size, concentration, and exposure regime. More numerous are studies where indirect inferences about possible ionoregulatory effects can be drawn; these indicate increased mucus production, altered breathing, histopathological effects on gill structure, oxidative stress, and alterations in molecular pathways. All of these could have negative effects on ionoregulatory homeostasis. However, previous research has suffered from a lack of standardized reporting of microplastic characteristics and exposure conditions. Often overlooked is the fact that microplastics are dynamic contaminants, changing over time through degradation and fragmentation and subsequently exhibiting altered surface chemistry, notably an increased presence and diversity of functional groups. The same functional groups characterized on microplastics are also present in dissolved organic matter, often termed dissolved organic carbon (DOC), a class of substances for which we have a far greater understanding of their ionoregulatory actions. We highlight instances in which the effects of microplastic exposure resemble those of DOC exposure. We propose that in future microplastic investigations, in vivo techniques that have proven useful in understanding the ionoregulatory effects of DOC should be used including measurements of transepithelial potential, net and unidirectional radio-isotopic ion flux rates, and concentration kinetic analyses of uptake transport. More sophisticated in vitro approaches using cultured gill epithelia, Ussing chamber experiments on gill surrogate membranes, and scanning ion selective electrode techniques (SIET) may also prove useful. Finally, in future studies we advocate for minimum reporting requirements of microplastic properties and experimental conditions to help advance this important emerging field.

Evaluation of total, soluble and ionic fluoride concentration in whitening and desensitizing toothpastes.

Due to the popularity and increasing launch of toothpastes with whitening and sensitivity properties on the market, this study aimed to evaluate the fluoride concentrations in these products, since the concentrations of fluoride directly interfere with the anti-caries potential. This is an experimental, invitro study, where 37 samples from different batches (n = 3) purchased in different countries, were analysed in duplicate, via the ion-selective electrode technique to verify the concentration (μg/g or ppm F-) of total fluoride (TF), total soluble fluoride (TSF) and ionic fluoride (IF). For a comparative data analysis, ANOVA was applied followed by a Tukey's test for multiple comparisons. The level of confidence adopted was 95%. In the 37 assessed toothpastes, 45.9% contained NaF and 54.1% sodium monofluorophosphate (MFP). The TF found in the formulations ranged from 902.8 to 1539.4 ppm of F (mean: 1165.2 ± 179.3); fluoride concentration in the TSF fraction ranged from 708.8 to 1306.7 ppm of F (mean: 959.5 ± 162.4); IF results ranged from 101.9 to 1162.3 ppm of F (642.2 ± 294.1). Significant differences (p < 0.05) were found in the concentrations of the 59.5% assessed toothpastes in comparisons between declared and measured total fluoride (TF) concentrations, as well as in 62.2% when total fluoride (TF) and total soluble fluoride (TSF) were compared. In this study, most of the samples evaluated showed discrepancies when compared to the information declared by the manufacturers. In addition, the soluble concentrations found in half of the samples were lower than total concentrations and this may affect anti-caries effectiveness.

Determination of Some Organic and Inorganic Nutritional Constituents in Beta Vulgaris Roots Prepared in Different Methods

The nutritional value of the roots of Iraqi Beta vulgaris plant that have been prepared using several conventional techniques will be evaluated in the current research. One of the best and most important nutritional sources of iron, nitrate of nitrogen, magnesium, potassium, ascorbic acid, and folic acid is the juice of beta vulgaris roots.&#x0D; Spectrophotometric techniques like UV-Visible, HPLC, and AAS have been used to estimate the levels of some organic and inorganic nutritional constituents and determine the level of the nitrate ion using an ion selective electrode technique in the prepared beta vulgaris root juice. The concentration of these organic and inorganic components varies depending on how the Beta vulgaris juice is prepared. The roots of Beta vulgaris have been processed in four different ways.&#x0D; Ascorbic acid content is greatest in the prepared sample with sodium chloride (4.124 mg in 200 mL), while the sample treated with acetic acid has a high concentration of Betalains (10.96 mg in 200 mL) and folic acid (5.736 mg in 200 mL).&#x0D; The potassium (552 mg in 200 mL) and magnesium (54 mg in 200 mL) concentrations in juice from the acetic acid-treated sample were relatively higher than those obtained from other methods, whereas the prepared sample with NaCl has a high concentration of NO3- (616 mg in 200 mL) and the prepared sample with cool water has a high concentration of iron (0.75 mg in 200 mL).

Fluoride Levels in Borehole Water: The Case of Chiradzulu District in Malawi

Aims: The objective of this study was to determine the levels of fluoride in borehole water samples.&#x0D; Study Design: The total of eight samples were collected from five villages in Chiradzulu and transported in cooler ice-bath to the laboratory for the analysis.&#x0D; Place and Duration of Study: The study was conducted in the Department of Chemistry and Chemical Engineering Laboratories, at University of Malawi in the month of June.&#x0D; Methodology: The ion selective electrode technique was used to assess fluoride levels. Physicochemical water parameters were measured with multi-meters. &#x0D; Results: The results obtained ranged from 2.26 to 3.08 mg/L, 136 to 561 mg/L, 261-1212 μs/cm and 6.27 to 6.97, for Fluorides, TDS, conductivity and pH, respectively. Levels of fluorides exceeded permissible limits for borehole water established by WHO and were below the standards for MBS&#x0D; Conclusion: The results attained in the scope of the study support coloration of teeth observed amongst individuals in study communities, helping to understand that groundwater is not suitable for consumption. Therefore, the study provides recommendation for urgent implementation of defluoridation measures to provide clean and safe water for the existing community members.

The Stability of Analytes of Ionized Magnesium Concentration and Its Reference Range in Healthy Volunteers.

This study aimed to determine the stability of refrigerated analytes of iMg concentration at different time intervals and to establish iMg reference range in a cohort of healthy Omani volunteers (≥18 years). The concentrations of iMg were measured using the direct ion-selective electrode technique. Pearson's and Lin's concordance correlation coefficients along with the Bland-Altman plot were used to assess the levels of agreement between iMg concentrations of fresh and refrigerated blood samples at different time intervals. The study included 167 volunteers (51% females) with a median age of 21 (range: 20-25) years. The median, 2.5th, and 97.5th percentiles for fresh iMg reference ranges were 0.55, 0.47, and 0.68 mmol/L, respectively. The overall agreement between the fresh and refrigerated iMg concentrations was poor (rho-c = 0.51; p < 0.001). However, according to Altman's definition, iMg concentrations of the refrigerated samples for a period of ≤1 h had an excellent correlation with the fresh iMg concentrations (Lin's rho-c = 0.80), with a small average bias difference of 0.009 (95%CI; -0.025-0.043). A cut-off refrigeration period within ≤1 h at 2-8 °C can be considered an alternate time frame for the gold standard measurement (fresh or within 0.5 h).

Fluoride Determination in Milk, Soy, and Water-Based Products Using Ion-Selective Electrode and Direct Measurement Technique: Single-Laboratory Validation, First Action 2022.05.

The AOAC Stakeholder Panel on Infant Formula and Adult Nutritionals issued a call for methods for the determination of fluoride in infant formula. Standard Method Performance Requirement (SMPR®) 2014.016 was approved. A single-laboratory validation (SLV) of a fluoride ion-selective electrode (F-ISE) method was completed. Five powder samples were reconstituted, and hydrochloric acid was added to dissolve and release any bound fluoride. Samples included infant and adult nutritional products made from milk, whey, or soy, containing intact, partially hydrolyzed, or hydrolyzed proteins. Sodium citrate buffer was added to complex any interfering ions and adjust pH and ionic strength. Samples were analyzed in duplicate over 6 days using F-ISE. Results were calculated based on one of two least-squares (log fit) standard curves (0.02 to 0.1 µg/100 g or 0.1 to 2.0 µg/100 g). The LOQ for the method was determined to be 3.3 µg/100 g, which was far below the minimum analytical value of 30 µg/100 g required in the SMPR. The fluoride concentrations ranged from approximately 3 to 14 µg/100 g reconstituted powder and the intermediate precision, RSDr, ranged from 0.7 to 12.4%. Although all of these results are out of scope for the SMPR due to their low fluoride, it should be noted that the RSDr for formulas with fluoride concentrations ranging from approximately 9 to 14 µg/100 g ranged from 0.7 to 4.3%, and the RSDr for the two formulas with fluoride concentrations at or below the theoretical detection limit of the method were only approximately10 and 12.4%. Recoveries ranged from 94 to 98% for samples spiked at three levels with NIST-traceable standard solutions, meeting the SMPR. The F-ISE method meets the SMPR and was adopted as a First Action Official MethodSM. The fluoride ion-selective electrode method presented here is affordable and easy to run. The addition of acid to the samples dissolves any minerals which may bind the fluoride.

Ion fluxes Involved in the Adaptation of the Estuarine Diatom Coscinodiscus centralis Ehrenberg to Salinity Stress.

Although estuarine diatoms have a wide range of salt tolerance, they are often severely stressed by elevated salt concentrations. It remains poorly understood how estuarine diatoms maintain ionic homeostasis under high-salinity conditions. Using a scanning ion-selective electrode technique, this study determined the fluxes of H+, Na+, and K+ involved in the acclimatization of the estuarine diatom Coscinodiscus centralis Ehrenberg after an elevation in salinity from 15 psu to 35 psu. The C. centralis cells exhibited marked H+ effluxes after a transient treatment (TT, 30 min) and short-term treatment (ST, 24 h). However, a drastic shift of H+ efflux toward an influx was induced in the long-term treatment (LT, 10 days). The Na+ flux under TT, ST, and LT salinity conditions was found to accelerate the Na+ efflux. More pronounced effects were observed under the ST and LT salinity conditions compared to the TT salinity condition. The K+ influx showed a significant increase under the LT salinity condition. However, the salinity-induced Na+/H+ exchange in the estuarine diatom was inhibited by amiloride and sodium orthovanadate. These results indicate that the Na+ extrusion in salt-stressed cells is mainly the result of an active Na+/H+ antiport across the plasma membrane. The pattern of ion fluxes under the TT and ST salinity conditions were different from those under the LT salinity conditions, suggesting an incomplete regulation of the acclimation process in the estuarine diatom under short-term salinity stress.

Assessment of 24 h Sodium and Potassium Urinary Excretion in Normotensive and Hypertensive Dominican Adults.

Higher salt (sodium) intake has been associated with higher blood pressure (BP). The degree of association may be influenced by factors such as age, origin, and dietary components. This study aimed to evaluate the 24 h urinary sodium (Na) and potassium (K) excretion in normotensive and hypertensive Dominican adults and estimate their salt intake. 163 volunteers (18-80 years old) participated in a cross-sectional study. The 24 h Na and K urinary excretion were measured using an ion-selective electrode technique. Na and K urinary excretion (99.4 ± 46.5 and 35.0 ± 17.5 mmol/24 h) did not correlate with BP, except in the normotensive group, in which K correlated with SBP (0.249, p = 0.019). Na and K excretion were similar in normotensive and hypertensive subjects. When considering two age groups (18-45, 46-80 years), the Na-to-K molar ratio (3.1 ± 1.3) was higher in younger subjects (p = 0.040). Na-to-K ratio was associated with DBP in the total group (r = 0.153, p = 0.052), in the hypertensive group (r = 0.395, p < 0.001), and in the older group with SBP (0.350, p = 0.002) and DBP (0.373, p < 0.001). In the older group, Na-to-K ratio and DBP correlated after controlling for subjects with hypertension controlled by treatment (r = 0.236, p = 0.041). The Na-to-K ratio correlated, when salt intake was over 5 g/day (52.2%), with SBP (rho = 0.219, p = 0.044) and DBP (rho = 0.259, p = 0.017). Determinants of BP in the total sample were age (SBP, beta: 0.6 ± 0.1, p < 0.001; DBP, beta: 0.2 ± 0.1, p < 0.002), sex (SBP, beta: 11.2 ± 3.5, p = 0.001), body mass index (BMI) (SBP, beta: 1.0 ± 0.3, p < 0.001; DBP, beta: 0.4 ± 0.2, p = 0.01), and Na-to-K ratio (SBP, beta: 3.0 ± 1.1, p = 0.008; DBP, beta: -12.3 ± 4.0, p = 0.002). Sex and BMI were determinants in the younger group. Na-to-K molar ratio was determinant in the older group (SBP, beta: 6.7 ± 2.4, p = 0.005; DBP, beta: 3.8 ± 1.1, p < 0.001). The mean Na and salt intakes (2.3 and 5.8 g/day) were slightly higher and the K intake lower (1.4 g/day) than WHO recommendations.

A comparison of serum sodium levels measured using a colorimetric kit approach and those determined using direct and indirect ion selective electrode techniques- in a Hospital Central Lab

When electrolyte imbalances are not recognized, they are known to cause severe morbidity and mortality. Dyselectrolytemia is frequently curable. Hyponatremia is a common symptom seen in the elderly. Laboratory equipment may be lacking in rural healthcare settings. As a result, the purpose of this study was to investigate the feasibility of developing a screening technique that can aid in the detection of hyponatremia in such facilities. Serum sodium levels in 120 samples were determined by direct, indirect, and colorimetric ISE. SPSS version 17, NCSS 11, and MINITAB 18 software were used for statistical analysis. Statistical significance was defined as a p-value of 0.05. While comparing the instruments, a basic linear regression analysis was performed, and a regression equation for sodium levels was established. The Bland-Altman analysis yielded a 95% agreement limit between the instruments, which is well within the CLIA-recommended target value of 4 mmol/L in the hyponatremic and normonatremic ranges. The resulting regression equation computes a predicted value for direct and indirect ISE using the colorimeter readings, making it similar to all three instruments in the hyponatremic and normonatremic ranges. The colorimetric method can be used as a low-cost screening technique to identify hyponatremic elderly people for whom a tertiary hospital may be inaccessible, allowing for early care.

Molecular Physiological Evidence for the Role of Na+-Cl− Co-Transporter in Branchial Na+ Uptake in Freshwater Teleosts

The gills are the major organ for Na+ uptake in teleosts. It was proposed that freshwater (FW) teleosts adopt Na+/H+ exchanger 3 (Nhe3) as the primary transporter for Na+ uptake and Na+-Cl- co-transporter (Ncc) as the backup transporter. However, convincing molecular physiological evidence to support the role of Ncc in branchial Na+ uptake is still lacking due to the limitations of functional assays in the gills. Thus, this study aimed to reveal the role of branchial Ncc in Na+ uptake with an in vivo detection platform (scanning ion-selective electrode technique, SIET) that has been recently established in fish gills. First, we identified that Ncc2-expressing cells in zebrafish gills are a specific subtype of ionocyte (NCC ionocytes) by using single-cell transcriptome analysis and immunofluorescence. After a long-term low-Na+ FW exposure, zebrafish increased branchial Ncc2 expression and the number of NCC ionocytes and enhanced gill Na+ uptake capacity. Pharmacological treatments further suggested that Na+ is indeed taken up by Ncc, in addition to Nhe, in the gills. These findings reveal the uptake roles of both branchial Ncc and Nhe under FW and shed light on osmoregulatory physiology in adult fish.

Corrosion mechanism of Ti-6Al-4V morse taper dental implants connected to 316 L stainless steel prosthetic abutment

The aim of this work was to investigate the effect of galvanic coupling between stainless steel AISI 316 L abutment type Morse taper and implant made of ASTM F1108–14 Ti-6Al-4V alloy. The assembly of the two alloys was carried out using mechanical imbrication by means of successive strikes at 0.05 J force onto the abutment inserted in the implant along the centerline. Corrosion attack at the interface of the alloys was evaluated according to the number of strikes used for joining the parts. Corrosion resistance was evaluated for the samples by open circuit potential measurements as function of time and scanning vibrating electrode technique (SVET) and scanning ion selective electrode technique (SIET) in phosphate buffer solution with pH adjusted to 3.0, and into which hydrogen peroxide was added to simulate tissue inflammatory conditions. Samples were evaluated at the cross and longitudinal sections. Results indicated that the number of strikes used in assembling affected corrosion susceptibility. The lowest amount of corrosion products was associated to the highest number of strikes used. The corrosion resistance was related to the characteristics of the crevice between the implant and the abutment. • Galvanic corrosion between Ti grade V dental implants and AISI 316 L prosthetic abutment was investigated. • Localized attack susceptibility increased with the number of strikes to connect the Ti grade V dental implant and the AISI 316 L abutment. • Local electrochemical techniques were very useful in evaluating the corrosion of the coupled dental implant and prosthetic abutment.

Investigating local corrosion processes of magnesium alloys with scanning probe electrochemical techniques: A review

The study of corrosion of magnesium and its alloys has emerged a hot topic in the applications of lightweight structural materials. The inherently high electrochemical activity of bare magnesium surfaces still lacks a convincing mechanism to describe the observed experimental characteristics, and it has prompted the development of various types of protective coatings with the aim of slowing metal dissolution. In recent years, new instruments and techniques have been developed to study with spatial resolution the local corrosion processes that occur in metallic materials in general, and for magnesium and its alloys in particular, both for bare surfaces and coated. Scanning microelectrochemical techniques, such as local electrochemical impedance spectroscopy (LEIS), scanning electrochemical microscopy (SECM), scanning vibrating electrode technique (SVET), scanning ion-selective electrode technique (SIET) and scanning Kelvin probe (SKP) can provide information about the local electrochemical activity of metallic surfaces. In the present work, the applications of these techniques in corrosion studies of magnesium and its alloys are reviewed. Assessment of corrosion mechanisms, barrier properties of conventional coatings and active corrosion behavior of self-healing coatings are examined. Limitations and future developments in this area are discussed.

Synergistic Behavior of Polyethyleneimine and Epoxy Monomers Loaded in Mesoporous Silica as a Corrosion-Resistant Self-Healing Epoxy Coating.

Corrosion is a significant problem and is, to a large extent, responsible for the degradation of metallic parts. In this direction, mesoporous silica particles (MSPs) were synthesized by a sol–gel technique and had an average pore diameter of ∼6.82 nm. The MSPs were loaded with polyethyleneimine (PEI) and epoxy monomers and, after that, carefully mixed into the epoxy matrix to formulate new modified polymeric coatings. The microstructural, compositional, structural, and thermal properties were investigated using various characterizing tools [Transmission electron microscopy, Fourier transform infrared spectroscopy, hermogravimetric analysis (TGA), and X-ray photoelectron spectroscopy]. TGA confirms the loading of mesoporous silica with a corrosion inhibitor, and its estimated loading amount is ∼8%. The electrochemical impedance spectroscopy properties of the reference and modified coated samples confirm the promising anti-corrosive performance of the synthesized polymeric smart coatings. Localized electrochemical tests (scanning vibrating electrode technique and scanning ion-selective electrode technique) evidence the corrosion inhibition ability of the coating, and its self-healing was also observed during 24 h of immersion. The decent anti-corrosion performance of the modified coatings can be credited to the efficient synergistic effect of the PEI and epoxy monomer.

In Vivo Functional Assay in Fish Gills: Exploring Branchial Acid-Excreting Mechanisms in Zebrafish.

Molecular and physiological analyses in ionoregulatory organs (e.g., adult gills and embryonic skin) are essential for studying fish ion regulation. Recent progress in the molecular physiology of fish ion regulation was mostly obtained in embryonic skin; however, studies of ion regulation in adult gills are still elusive and limited because there are no direct methods for in vivo functional assays in the gills. The present study applied the scanning ion-selective electrode technique (SIET) in adult gills to investigate branchial H+-excreting functions in vivo. We removed the opercula from zebrafish and then performed long-term acid acclimation experiments. The results of Western blot and immunofluorescence showed that the protein expression of H+-ATPase (HA) and the number of H+-ATPase-rich ionocytes were increased under acidic situations. The SIET results proved that the H+ excretion capacity is indeed enhanced in the gills acclimated to acidic water. In addition, both HA and Na+/H+ exchanger (Nhe) inhibitors suppressed the branchial H+ excretion capacity, suggesting that H+ is excreted in association with HA and Nhe in zebrafish gills. These results demonstrate that SIET is effective for in vivo detection in fish gills, representing a breakthrough approach for studying the molecular physiology of fish ion regulation.

CONTAMINATION OF FLUORIDE IN GROUNDWATER AND ITS IMPACT ON HUMAN HEALTH IN PONDI-UPRODA BLOCK IN KORBA DISTRICT, CHHATTISGARH

Fluoride is a frequent chemical element present in groundwater. Fluoride can reduce dental caries when taken in modest amounts, increased fluoride concentrations could induce dental fluorosis or tooth decay, In April-May 2021, twenty-four samples were obtained at random from different villages in the Pondi-uproda block of the Korba district. The Ion-Selective Electrode (ISE) technique and TWAD water testing kit were used to assess the concentration of fluoride in groundwater. Fluoride levels ranged from 0.78 to 8.62 mg/l in the groundwater of the study area, according to the findings. The majority of people in these areas depend on groundwater for irrigation, drinking and domestic use. In this location, 66.6% of samples had fluoride that exceeded WHO permitted limits. Dental and skeletal fluorosis is caused by excessive fluoride levels in drinking water; as a result, a suitable defluoridation method for water treatment in this area should be used.

Characteristics of NH4+ and NO3- Fluxes in Taxodium Roots under Different Nitrogen Treatments.

To understand the characteristics of net NH4+ and NO3− fluxes and their relation with net H+ fluxes in Taxodium, net fluxes of NH4+, NO3− and H+ were detected by a scanning ion-selective electrode technique under different forms of fixed nitrogen (N) and experimental conditions. The results showed that higher net NH4+ and NO3− fluxes occurred at 2.1–3.0 mm from the root apex in T. ascendens and T. distichum. Compared to NH4+ or NO3− alone, more stable net NH4+ and NO3− fluxes were found under NH4NO3 supply conditions, of which net NH4+ flux was promoted at least 1.71 times by NO3−, whereas net NO3− flux was reduced more than 81.66% by NH4+ in all plants, which indicated that NH4+ is preferred by Taxodium plants. T. ascendens and T. mucronatum had the largest net NH4+ and total N influxes when NH4+:NO3− was 3:1. 15N Atom% and activities of N assimilation enzymes were improved by single N fertilization in the roots of T. distichum. In most cases, net H+ fluxes were tightly correlated with net NH4+ and NO3− fluxes. Thus, both N forms and proportions could affect N uptake of Taxodium. These findings could provide useful guidance for N management for better productivity of Taxodium plants.

Localized corrosion of magnesium alloys potentially applicable for medical implants: fundamental aspects

A comparative analysis of the corrosion activity of bioresorbable MA8 magnesium alloy (Mg&ndash; Mn &ndash; Ce system) in a medium for cultivation of mammalian cells (minimum essential medium, MEM) and 0.83 wt. % aqueous NaCl solution was performed. The development of the corrosion process on the surface of a magnesium alloy in two media was established using local scanning electrochemical methods (scanning vibrating electrode technique and scanning ion-selective electrode technique), traditional electrochemical methods (potentiodynamic polarization, electrochemical impedance spectroscopy) and hydrogen evolution measurements. The protective properties of the corrosion film formed on the alloy in MEM, as well as during exposure to NaCl solution, were established. The composition of the layer of corrosion products formed on the magnesium alloy in MEM was studied using confocal Raman spectroscopy, X-ray diffraction analysis, scanning electron microscopy, and energy dispersive X-Ray analysis. Calcium-phosphate compounds are the main products formed on the surface of a magnesium alloy during immersion in MEM. The model of corrosion mechanism of magnesium alloy in MEM, which includes three stages of the development of surface film, is proposed. The formation on the magnesium alloy in MEM of corrosion product layer, including magnesium-substituted hydroxyapatite, stabilizes the local pH below 9.0, which along with the presence of organic acids, does not allow increasing the pH during corrosion. A diagram that allows one to determine the possible reactions occurring on the surface of a magnesium alloy in MEM and the thermodynamic probability of the formation of chemical compounds based on the values of the local pH is designed. The obtained results indicate the prospect of using bioresorbable magnesium implants in surgery.

A review on the corrosion resistance of electroless Ni-P based composite coatings and electrochemical corrosion testing methods

Abstract This paper aims to review the impact of different factors influencing the corrosion resistance of electroless Ni-P based coatings. Emphasis has been given onto the impact of phosphorus content, incorporation of alloying elements, addition of particles and heat treatment which have been discussed in detail and critically reviewed. The effect of corrosive media and coating process parameters on corrosion resistance are studied concisely. Furthermore, the role of the incorporation of various elements and particles’ contents on the corrosion resistance of electroless Ni-P coating are studied systematically. This paper also presents an overview of the latest electrochemical corrosion measuring techniques. The following approaches deserve special attention in the analysis: localized electrochemical impedance spectroscopy (LEIS), scanning vibrating electrode technique (SVET), scanning ion-selective electrode technique (SIET), scanning droplet cell (SDC), scanning electrochemical microscopy (SECM), scanning Kelvin probe (SKP) and novel contactless technique (NCT).

Comparing the corrosion behaviour of AA2050 and AA7050 aluminium alloys by scanning vibrating electrode and scanning ion-selective electrode techniques

ABSTRACT The susceptibility to localised corrosion of the high strength alloys, AA2050-T84 and AA7050-T7451, used in the aerospace industry, was investigated in this study by localised electrochemical techniques, specifically, scanning vibrating electrode technique (SVET) and scanning ion-selective electrode technique (SIET), in 0.005 mol L−1 NaCl solution. The study was initially carried out using both alloys individually and then, coupling the two alloys and evaluating the effect of galvanic coupling between them. The results revealed that the AA2050-T84, being nobler than the AA7050-T7451, presented higher corrosion current density values when tested in isolation and the depth of corrosion penetration was significantly deeper in the AA2050-T84 alloy than in the AA7050-T7451. However, galvanic coupling of the two alloys resulted in cathodic protection of the AA2050-T84 alloy and a reduction in corrosion current densities on both alloys.

Magnesium cationic cue enriched interfacial tissue microenvironment nurtures the osseointegration of gamma-irradiated allograft bone

Regardless of the advancement of synthetic bone substitutes, allograft-derived bone substitutes still dominate in the orthopaedic circle in the treatments of bone diseases. Nevertheless, the stringent devitalization process jeopardizes their osseointegration with host bone and therefore prone to long-term failure. Hence, improving osseointegration and transplantation efficiency remains important. The alteration of bone tissue microenvironment (TME) to facilitate osseointegration has been generally recognized. However, the concept of exerting metal ionic cue in bone TME without compromising the mechanical properties of bone allograft is challenging. To address this concern, an interfacial tissue microenvironment with magnesium cationc cue was tailored onto the gamma-irradiated allograft bone using a customized magnesium-plasma surface treatment. The formation of the Mg cationic cue enriched interfacial tissue microenvironment on allograft bone was verified by the scanning ion-selective electrode technique. The cellular activities of human TERT-immortalized mesenchymal stem cells on the Mg-enriched grafts were notably upregulated. In the animal test, superior osseointegration between Mg-enriched graft and host bone was found, whereas poor integration was observed in the gamma-irradiated controls at 28 days post-operation. Furthermore, the bony in-growth appeared on magnesium-enriched allograft bone was significant higher. The mechanism possibly correlates to the up-regulation of integrin receptors in mesenchymal stem cells under modified bone TME that directly orchestrate the initial cell attachment and osteogenic differentiation of mesenchymal stem cells. Lastly, our findings demonstrate the significance of magnesium cation modified bone allograft that can potentially translate to various orthopaedic procedures requiring bone augmentation.