Ion Mobility Spectrometry Instrument Research Articles

On the Arrival Time Distribution of Reacting Systems in Ion Mobility Spectrometry.

Ion mobility spectrometry (IMS) is a widely used gas-phase separation technique, particularly when coupled with mass spectrometry (MS). Modern IMS instruments often apply elevated reduced field strengths for improved ion separation and ion focusing. These alter the collision dynamics and further drive ion reaction processes that can change the analyte's structure. As a result, the measured arrival time distribution (ATD) can change with the applied reduced field strengths. In this work, we systematically study how the ion collision dynamics and the ion reaction dynamics, as a function of the reduced field strength, can alter the ATD. To this end, we investigate 2,6-di-tert-butylpyridine, methanol, and ethyl acetate using a home-built drift tube IMS coupled to a home-built MS and extensive first-principles Monte Carlo modeling. We show how elevated reduced field strengths can actually lower resolving power through increased ion diffusion and how the field dependency of the ion mobility can introduce uncertainties to collision cross sections (CCS) calculated from the measured mobilities. On top of the collision dynamics, we show how chemical transformation processes that alter the analyte's CCS, e.g., dynamic clustering or fragmentation, can lead to broadened, shifted, or non-Gaussian ATDs and how sensitive these processes are to the applied field strengths. We highlight how first-principles ion dynamics simulations can help to understand and even harness the mentioned effects.

Interplatform comparison between three ion mobility techniques for human plasma lipid collision cross sections

The implementation of ion mobility spectrometry (IMS) in liquid chromatography-high-resolution mass spectrometry (LC-HRMS) workflows has become a valuable tool for improving compound annotation in metabolomics analyses by increasing peak capacity and by adding a new molecular descriptor, the collision cross section (CCS). Although some studies reported high repeatability and reproducibility of CCS determination and only few studies reported good interplatform agreement for small molecules, standardized protocols are still missing due to the lack of reference CCS values and reference materials.We present a comparison of CCS values of approximatively one hundred lipid species either commercially available or extracted from human plasma. We used three different commercial ion mobility technologies from different laboratories, drift tube IMS (DTIMS), travelling wave IMS (TWIMS) and trapped IMS (TIMS), to evaluate both instrument repeatability and interlaboratory reproducibility. We showed that CCS discrepancies of 0.3% (average) could occur depending on the data processing software tools. Moreover, eleven CCS calibrants were evaluated yielding mean RSD below 2% for eight calibrants, ESI Low concentration tuning mix (Tune Mix) showing the lowest RSD (< 0.5%) in both ion modes. Tune Mix calibrated CCS from the three different IMS instruments proved to be well correlated and highly reproducible (R2 > 0.995 and mean RSD ≤ 1%). More than 90% of the lipid CCS had deviations of less than 1%, demonstrating high comparability between techniques, and the possibility to use the CCS as molecular descriptor. We highlighted the need of standardized procedures for calibration, data acquisition, and data processing. This work demonstrates that using harmonized analytical conditions are required for interplatform reproducibility for CCS determination of human plasma lipids.

Rapid screening of 14 antibacterial drugs in anti-acne cosmetics using ion mobility spectrometry coupled with solid-phase extraction

The main methods currently used to detect illegally added chemicals in cosmetics include thin-layer chromatography, high performance liquid chromatography (HPLC), gas chromatography (GC), and liquid chromatography-mass spectrometry (LC-MS). Compared with other analytical techniques, these methods have the advantages of high sensitivity, specificity, and accuracy, all of which are required in practical detection work. However, they also present a number of limitations, such as long analysis times and requirements for skilled operators and strictly controlled laboratory environments. Supervision, a growing trend in market surveillance, requires rapid and effective methods to screen illegally added chemicals. The suspected samples are sealed for some time and then sent to the laboratory for further testing. Ion mobility spectrometry (IMS) is a new type of trace gas separation technology that was developed in recent years. The principle behind IMS is the separation and characterization of chemical species based on differences in the migration speed of their gas-phase ions under an electric field. As this technology has the advantages of miniaturization, easy operation, and quick responses, it is widely used in food and drug quality testing, as well as other related fields. However, it is rarely used in cosmetic detection, likely because the cosmetics matrix is highly complex, which can interfere with ion determination. Thus, optimizing the pretreatment process of cosmetics for IMS is important. In this work, solid-phase extraction (SPE) is combined with IMS to establish a method for the rapid screening of 14 antibacterial drugs in anti-acne cosmetics. The IMS detection parameters, sample extraction conditions, and SPE clean-up conditions (SPE column, type of leachate, type and volume of eluent) were studied and optimized in detail. The sample was extracted with 80%(v/v) acetonitrile aqueous solution (containing 0.2% (mass fraction) trichloroacetic acid), loaded onto an activated Oasis® MCX SPE column, leached with 3.0 mL of methanol, and eluted with 1.0 mL of 2% ammonia methanol solution. The eluate was then directly injected into the IMS instrument. The IMS parameters were as follows: positive ion source voltage=2200 V, transfer tube voltage=8000 V, inlet temperature=180 ℃, transfer tube temperature=180 ℃, ion gate voltage=50 V, gate voltage pulse width=85 μs, and migration gas flow rate=1.2 L/min. The migration times for the 14 antibacterial drugs ranged from 11 to 17 ms, and the detection limits for the target compounds ranged from 0.2 to 1.2 μg/g. Owing to the narrow linear range of IMS, a quantitative method employing HPLC was also established to optimize the SPE pretreatment step and verify the positive samples. Chromatographic separation was conducted on a Phenomenex Luna C18 column (250 mm×4.6 mm, 5 μm), with a column flow rate of 1.0 mL/min and gradient elution with mobile phases A (0.01 mol/L potassium dihydrogen phosphate adjusted to pH 4.0 with phosphoric acid) and B (acetonitrile). The column temperature was set to 35 ℃, and the injection volume was fixed at 5 μL. A total of 25 cosmetics samples were screened, and one positive sample was found to be consistent with the results of HPLC. The proposed method is fast, simple, and efficient, and it can be used for the rapid screening of the 14 antibacterial drugs in anti-acne cosmetics. Pretreatment can significantly reduce the influence of the cosmetic matrices on the determination results, improve instrument sensitivity, and effectively decrease the occurrence rate of false positives and negatives. The technique developed in this work can improve the efficiency of screening for illegally added chemicals and expand the applications of IMS for detecting various chemicals in complex matrices, such as cosmetics.

Detection of Mycotoxins in Highly Matrix-Loaded House-Dust Samples by QTOF-HRMS, IM-QTOF-HRMS, and TQMS: Advantages and Disadvantages.

The analysis of (trace) contaminants in environmental samples represents an important tool for exposure assessment and for the evaluation of potential risks to human health. Currently, mass spectrometric detection using triple quadrupole (TQMS) systems is the established method of choice. However, screening methods using high resolution mass spectrometry (HRMS) find increasing application as they provide advantages such as enhanced selectivity. A complex composition of environmental samples is known to have enormous effects on mass analyzers. The present work therefore compares the impact of a highly matrix-loaded sample material like house-dust on the performance of mass spectrometric detection of the emerging indoor contaminant group of mycotoxins by quadrupole time-of-flight (QTOF) and TQMS after ultrahigh-performance liquid chromatographic separation. Furthermore, the role of ionization efficiencies of different ion sources in instrument sensitivity was compared using an electrospray ionization source and a newly developed heated electrospray ion source (Bruker VIP-HESI) during QTOF experiments. Finally, it was evaluated whether an additional dimension of separation enables increased sensitivity in QTOF-HRMS detection by applying mycotoxins in house-dust to an (trapped) ion mobility spectrometry instrument. The sensitivity of the QTOF detection was positively influenced by the application of the VIP-HESI ion source, and overall HRMS instruments provided enhanced selectivity resulting in simplified data evaluation compared to the TQMS. However, all performed experiments revealed strong signal suppression due to matrix components. QTOF results showed more severe effects, enabling a more sensitive detection of mycotoxins in house-dust by applying TQMS detection.

Assessment of opioid surrogates for ion mobility spectrometry testing (Part II)

Opioids are a serious and potentially fatal danger to not only those that abuse the drug, but also to those in law enforcement that depend upon its detection in the field. Certain members of the opioid family are not even intended for human use, but have still found their way into illicit drug sales. First responders require proper training on testing equipment (e.g., ion mobility spectrometry (IMS)) and methods to be employed for safe and rapid detection. IMS instruments are deployed at border patrol points across the U.S. and are capable of nanogram level detection. Unfortunately, the direct handling of of hazardous and controlled substances during training is still a necessity. Training users with surrogate compounds provides the necessary experience required before encountering any threats posed by opioids, on-site. The reduced ion mobilities of 15 potential surrogate compounds were assessed on a commercially available instrument in order to determine their similarity (i.e. ± 5%) to heroin, fentanyl, and carfentanil. Of those tested, 14 were considered to be useful opioid surrogates. The compounds that exhibited similar reduced ion mobilities to heroin, fentanyl and carfentanil were cut with lactose and acetaminophen to assess matrix effects. Compounds exhibiting similar reduced ion mobilities to the target opioids under all conditions can be considered for application in IMS training for hazardous opioids.

Using a Cyclic Ion Mobility Spectrometer for Tandem Ion Mobility Experiments.

Accurate characterization of chemical structures is important to understand their underlying biological mechanisms and functional properties. Mass spectrometry (MS) is a popular tool but is not always sufficient to completely unveil all structural features. For example, although carbohydrates are biologically relevant, their characterization is complicated by numerous levels of isomerism. Ion mobility spectrometry (IMS) is an interesting complement because it is sensitive to ion conformations and, thus, to isomerism. Furthermore, recent advances have significantly improved the technique: the last generation of Cyclic IMS instruments offers additional capabilities compared to linear IMS instruments, such as an increased resolving power or the possibility to perform tandem ion mobility (IMS/IMS) experiments. During IMS/IMS, an ion is selected based on its ion mobility, fragmented, and reanalyzed to obtain ion mobility information about its fragments. Recent work showed that the mobility profiles of the fragments contained in such IMS/IMS data can act as a fingerprint of a particular glycan and can be used in a molecular networking strategy to organize glycomics datasets in a structurally relevant way. The goal of this protocol is thus to describe how to generate IMS/IMS data, from sample preparation to the final Collision Cross Section (CCS) calibration of the ion mobility dimension that yields reproducible spectra. Taking the example of one representative glycan, this protocol will show how to build an IMS/IMS control sequence on a Cyclic IMS instrument, how to account for this control sequence to translate IMS arrival time into drift time (i.e., the effective separation time applied to the ions), and how to extract the relevant mobility information from the raw data. This protocol is designed to clearly explain the critical points of an IMS/IMS experiment and thus help new Cyclic IMS users perform straightforward and reproducible acquisitions.

Coupling Droplet Microfluidics with Ion Mobility Spectrometry for Monitoring Chemical Conversions at Nanoliter Scale.

We introduce the coupling of droplet microfluidics and ion mobility spectrometry (IMS) to address the challenges of label-free and chemical-specific detection of compounds in individual droplets. In analogy to the established use of mass spectrometry, droplet-IMS coupling can be also achieved via electrospray ionization but with significantly less instrumental effort. Because IMS instruments do not require high-vacuum systems, they are very compact, cost-effective, and robust, making them an ideal candidate as a chemical-specific end-of-line detector for segmented flow experiments. Herein, we demonstrate the successful coupling of droplet microfluidics with a custom-built high-resolution drift tube IMS system for monitoring chemical reactions in nL-sized droplets in an oil phase. The analytes contained in each droplet were assigned according to their characteristic ion mobility with limit of detections down to 200 nM to 1 μM and droplet frequencies ranging from 0.1 to 0.5 Hz. Using a custom sheath flow electrospray interface, we have further achieved the chemical-specific monitoring of a biochemical transformation catalyzed by a few hundred yeast cells, at single droplet level.

Using gas-phase chloride attachment for selective detection of morphine in a morphine/codeine mixture by ion mobility spectrometry.

Morphine and codeine are two important compounds of the opiate family that have vast applications in medicine. Several techniques have been reported for the determination of these opiates. Although ion mobility spectrometry (IMS) in positive ion mode can be applied for detection of both morphine and codeine, this technique on its own cannot detect a mixture of these two compounds because of the overlapping of their peaks. An IMS instrument equipped with a corona discharge ion source operating in negative ion mode was used for the detection of anionic clusters of morphine and codeine. In normal negative ion mode, NOx - , CO3 - , and On - act as the main reactant ions (RIs) which can deprotonate the analytes. We also used chloroform as a dopant to produce Cl- as an alternative RI. Morphine has a phenolic and an alcoholic OH group, while codeine bears only an alcoholic OH group. Because the phenolic OH group is more acidic, only morphine is deprotonated in negative ion mode in a morphine/codeine mixture. Furthermore, since morphine has two OH groups that can act as hydrogen-bond donors, it acts as an anion receptor. Hence, in the presence of chloroform where Cl- acts as the RI, morphine traps the Cl- anion to form a morphine-Cl- (Mor.Cl- ) adduct ion, while because of its structure codeine does not have this capability. Using the difference in the structures of morphine and codeine, two ionization methods were proposed for selective detection of morphine. Morphine is more acidic than codeine and has greater anion-receiving capability than codeine. Hence, it can both be deprotonated and form a adduct anion with Cl- . The Cl- attachment method is recommended for measurements at ambient temperature.

Small Host–Guest Systems in the Gas Phase: Tartaric Acid as a Host for both Anionic and Cationic Guests in the Atmospheric Pressure Chemical Ionization Source of Ion Mobility Spectrometry

The ionization of tartaric acid (TA) in an atmospheric pressure chemical ionization corona discharge ion source was studied by ion mobility spectrometry (IMS) with zero air as the drift gas. Density functional theory was used for structural and thermodynamic analyses of the produced ionic clusters. Ion mobility spectra of TA were recorded in both positive and negative modes of CD with and without ammonia and chloroform as dopants in order to produce NH4+ and Cl-, respectively, as the reactant ions (RIs). In the absence of these dopants, the RIs were mainly H3O+ and O2- in the positive and negative CD, respectively. TA solutions in water and methanol were injected into the ionization region of the IMS instrument, and the product cations TA·H+(H2O)n, TA·H+(CH3OH), TA·NH4+, and TA·NH4+(CH3OH) were observed in the positive CD. Anionic clusters (TA-H)-, (TA-H)-·CH3OH, (TA-H)-·TA, TA·Cl-, and (TA)2Cl- were produced in the negative CD. The anions TA·Cl- and (TA)2Cl- were not produced in an air atmosphere, and we observed their peaks when pure oxygen was used as the drift gas. Optimized structures of the clusters showed that TA·NH4+, TA·Cl-, and (TA)2Cl- are small host-guest systems in the gas phase, with TA as a host. (TA)2Cl- is a weakly bonded complex (an anion-bound dimer) that was observed at atmospheric pressure. The proton-bound dimer TA·H+·TA was not produced in the positive CD, while the anionic dimer (TA-H)-·TA was observed in the negative CD. This phenomenon was interpreted on the basis of the hydration of TA·H+ and (TA-H)-.

Identification and quantification of amino acids and related compounds based on Differential Mobility Spectrometry.

Amino acids and related compounds constitute a class of biomarkers which is analyzed for early diagnosis of metabolic diseases (MDs). Protocols based on liquid chromatography hyphenated to tandem mass spectrometry (LC-MS/MS) are routinely used for MD diagnosis. Our ultimate objective is to evaluate the analytical performance of differential mobility spectrometry (DMS) hyphenated to MS/MS, in the perspective of using DMS-MS/MS as an alternative or complementary method for the topics of emergency in metabolic diagnosis and newborn rapid screening. The aim of the present study is to evaluate the robustness of a DMS-MS/MS protocol for the separation, identification, and quantification of amino acids and related compounds. Performance in terms of peak capacity and separation of isobaric and isomeric species is compared to those using drift tube type ion mobility spectrometry instruments. High reproducibility of the measurement of the DMS compensation voltage (CV) of metabolites shows that this CV parameter, or the corresponding electric field, could be used for application in metabolite identification. Multiple measurements show that the CV value of each AA or related compound is stable over a large period of time (6 months). Potential effects of matrix or concentration of the analytes on the DMS identifier are found to be negligible. Quantification of a selected set of metabolites in human plasmas has been carried out. The method linearity, intra-assay and inter-assay precision, detection limit, quantification limit and trueness analysis were assessed as adequate for both physiological and pathological conditions. Concentration levels of metabolites derived with our DMS-MS protocols were found to be in good agreement with those obtained with routine LC-MS/MS protocols used for the diagnosis of MDs at the Hospital Robert Debré (Paris).

Fabric-phase sorptive extraction coupled with ion mobility spectrometry for on-site rapid detection of PAHs in aquatic environment

The contamination of water is a high risk to human health, so there is an urgent need to rapidly detect water pollution in the field. Ion mobility spectrometry (IMS) is suitable for on-site analysis with the merit of rapid analysis and compact size. In this study, we developed a new method which coupled fabric phase sorptive extraction (FPSE) with IMS for rapid detection of polycyclic aromatic hydrocarbons (PAHs) in water present in the field. Polydimethylsiloxane (PDMS) was coated on the glass fiber cloth through a sol-gel reaction. After extracting the PAHs in water, the fabric coated PDMS could be directly put into the inlet of IMS instrument for thermal desorption. The PAHs were analyzed by the IMS instrument operated in the positive ion mode with a corona discharge (CD) ionization source. The primary parameters affecting extraction efficiency such as extraction time, extraction temperature, and ionic strength were investigated and optimized by using phenanthrene (Phe), benzo[a]anthracene (BaA) and benzo[a]pyrene (BaP) as model compounds. Under the optimal conditions, the FPSE-IMS detection limits were 5 ng ml−1,8 ng ml−1 and 10 ng ml−1 respectively. Satisfactory recoveries were obtained in the range from 80.5% to 100.5% by testing the spiked real water samples and validated by the standard method（HJ487-2009）. Based on the results, the method of FPSE-IMS could be feasibly applied for monitoring the water quality on-site and providing early warning in the field.

High Accuracy Ion Mobility Spectrometry for Instrument Calibration.

Ion mobility spectrometry (IMS) is widely used to characterize compounds of interest (COIs) based on their reduced mobility ( K0) values. In an attempt to increase the accuracy and agreement of studies, the most recommended method has been to use a reference compound with a known K0 value to calibrate the instrument and calculate COI K0 values from normalized spectra. Researchers are limited by the accuracy of previous K0 value reference measurements on which to base their calibrations. Any inaccuracy in these reference K0 values, typically ±2%, will propagate through to the calculated K0 value of the COI. For this reason, there is a need to standardize reference K0 values with improved accuracy. Through improvement of the accuracy of reference measurements, a lower degree of error will propagate through new K0 value calculations. The K0 values of the ammonium reactant ion, the potential reference standard dimethyl methylphosphonate (DMMP), and three explosive COIs were characterized at multiple drift gas temperatures, drift gas water contents, and electric field strengths on an accurate ion mobility spectrometry instrument. K0 values reported here are known to ±0.1% as a result of reducing the error of all instrumental parameters.

Use of an ion mobility spectrometer for detecting uranium compounds

The safeguards community currently lacks a method to rapidly determine the chemical form of radioactive and non-radioactive compounds in real time during inspection activities. Chemical speciation identification can provide important information on both the types of materials that are collected during environmental sampling and can inform inspectors as to where to focus efforts during inspections or complementary access visits. Ion Mobility Spectrometry (IMS) is an established field technique for the detection of explosives, narcotics, and other organic compounds. More recently, electrospray ionization (ESI) has been used to introduce inorganic compounds to IMS instruments for analysis. These techniques have shown the ability to supply chemical information on the compounds analyzed. Although these laboratory based instruments use a liquid-based injection system, there is evidence in the literature of unaltered and intact pharmaceutical tablets being volatilized and ionized in open atmosphere using heat and a Ni-63 source. This work determined that a commercial-off-the-shelf (COTS) IMS could be used for the identification of solid uranium compounds directly after sampling using a COTS sample swipe.

A novel ion detector aiming at the homogeneous of drift gas

In standalone ion mobility spectrometry (IMS) instruments, the effect of drift gas turbulence reduces the sensitivity and resolution of the instrument. A traditional ion detector constructed with a Faraday plate and used to detect ions in an IMS is positioned at the end of the drift region. Drift gas flowing through this detector may introduce turbulence near the detector, possibly affecting the sensitivity and resolution of the device. To address this problem, a novel Faraday detector with a double layer structure was constructed. A number of dense and staggered holes were created on each layer of the detector. This design enabled the drift gas to pass through the holes of the detector, and the staggered nature of holes in the detector ensured that the ions could be detected. Theoretical simulations were conducted using the finite element method to obtain velocity distributions for both a standard Faraday detector and the modified Faraday detector. The results indicated that the novel ion detector created a homogenous gas under at high inlet flow rate while turbulence was still evident for the traditional Faraday detector. When the inlet flow rate was 1000 mL/min, the range of the unstable region of the drift gas in the axis of the drift tube with the novel ion detector was reduced by 97% relative to that for the traditional detector. The data suggests that due to such gains, sensitivity and resolution may be improved for standalone IMS instruments.

Ion Mobility Spectrometry - High Resolution LTQ-Orbitrap Mass Spectrometry for Analysis of Homemade Explosives.

The detailed chemical characterization of homemade explosives (HMEs) and other chemicals that can mimic or mask the presence of explosives is important for understanding and improving the performance of commercial instrumentation used for explosive detection. To that end, an atmospheric-pressure drift tube ion mobility spectrometry (IMS) instrument has been successfully coupled to a commercial tandem mass spectrometry (MS) system. The tandem MS system is comprised of a linear ion trap and a high resolution Orbitrap analyzer. This IMS-MS combination allows extensive characterization of threat chemical compounds, including HMEs, and complex real-world background chemicals that can interfere with detection. Here, the composition of ion species originating from a specific HME, erythritol tetranitrate, has been elucidated using accurate mass measurements, isotopic ratios, and tandem MS. Gated IMS-MS and high-resolution MS have been used to identify minor impurities that can be indicative of the HME source and/or synthesis route. Comparison between data obtained on the IMS/MS system and on commercial stand-alone IMS instruments used as explosive trace detectors (ETDs) has also been performed. Such analysis allows better signature assignments of threat compounds, modified detection algorithms, and improved overall ETD performance. Graphical Abstract ᅟ.

The detection of nicotine in e-liquids using ion mobility spectrometry

Ion mobility spectrometry (IMS) is a well known field technique for the detection of various materials such as explosives and narcotics. IMS has been used for the detection and identification of nicotine, and this paper describes a simple preparation method and analysis using an Ionscan 500DT which could be used in a field environment for the detection of nicotine in e-liquids. E-liquids containing nicotine are presently a topic of much debate in many countries and their shipment across the Canadian border is prohibited. The method described here would allow border officers or any other operators of IMS instruments to use this technique to correctly determine the presence or absence of nicotine in the e-liquid; this would allow the timely importation of the e-liquids with no nicotine and restrict the laboratory analysis only to those liquids containing nicotine. The IMS method has been used on a number of samples received from manufacturers of e-liquids as well as samples seized at the border. The results of the IMS analysis correspond well with those obtained using a Gas Chromatograph – Mass Spectrometer (GC-MS) method of analysis for nicotine.

Potential of ion mobility spectrometry versus FT-MIR and GC-MS to study the evolution of a heat transfer fluid after its heating process in a thermosolar plant

Heat transfer fluid (HTF) is commonly used in heat transfer industrial processes such as those performed in thermosolar plants. Although HTF is thermally stable, the high temperatures used in such plants (around 400°C) and overheating in continuous cycles can alter its composition. The potential changes in its initial composition (biphenyl and diphenyl ether), and the likely production of new compounds, such as benzene and phenol, require using fast-response portable instruments for on-site quality control at thermosolar plants. In this work, the degradation profile of HTF heated for a variable time was for the first time characterized by using two different ion mobility spectrometry (IMS) instruments. The simple one used a UV lamp as ionization source (UV-IMS), whereas the other included a chromatographic column coupled to a tritium source (GC-3H-IMS). Other analytical techniques such as Fourier transform-mid infrared spectroscopy (FT-MIR) and gas chromatography–mass spectrometry (GC-MS) were also used for the same purpose. Based on the results, both IMS instruments can be useful for online quality control of HTF in a thermosolar plant. Thus, the UV-IMS instrument can be used for screening purposes and the GC-3H-IMS instrument for selective detection of benzene and phenol as degradation products.

Ion mobility spectrometric analysis of vaporous chemical warfare agents by the instrument with corona discharge ionization ammonia dopant ambient temperature operation

The ion mobility behavior of nineteen chemical warfare agents (7 nerve gases, 5 blister agents, 2 lachrymators, 2 blood agents, 3 choking agents) and related compounds including simulants (8 agents) and organic solvents (39) was comparably investigated by the ion mobility spectrometry instrument utilizing weak electric field linear drift tube with corona discharge ionization, ammonia doping, purified inner air drift flow circulation operated at ambient temperature and pressure. Three alkyl methylphosphonofluoridates, tabun, and four organophosphorus simulants gave the intense characteristic positive monomer-derived ion peaks and small dimer-derived ion peaks, and the later ion peaks were increased with the vapor concentrations. VX, RVX and tabun gave both characteristic positive monomer-derived ions and degradation product ions. Nitrogen mustards gave the intense characteristic positive ion peaks, and in addition distinctive negative ion peak appeared from HN3. Mustard gas, lewisite 1, o-chlorobenzylidenemalononitrile and 2-mercaptoethanol gave the characteristic negative ion peaks. Methylphosphonyl difluoride, 2-chloroacetophenone and 1,4-thioxane gave the characteristic ion peaks both in the positive and negative ion mode. 2-Chloroethylethylsulfide and allylisothiocyanate gave weak ion peaks. The marker ion peaks derived from two blood agents and three choking agents were very close to the reactant ion peak in negative ion mode and the respective reduced ion mobility was fluctuated. The reduced ion mobility of the CWA monomer-derived peaks were positively correlated with molecular masses among structurally similar agents such as G-type nerve gases and organophosphorus simulants; V-type nerve gases and nitrogen mustards. The slope values of the calibration plots of the peak heights of the characteristic marker ions versus the vapor concentrations are related to the detection sensitivity, and within chemical warfare agents examined the slope values for sarin, soman, tabun and nitrogen mustards were higher. Some CWA simulants and organic solvents gave the ion peaks eluting at the similar positions of the CWAs, resulting in false positive alarms.

A novel driving mode for ion shutter based on alternating current superposition and its application to ion mobility spectrometry

In order to simplify the design of an ion shutter power supply and decrease its cost, a simple ion shutter driving mode based on alternating current (AC) superposition mode was designed. A power supply with AC superposition was fabricated and applied to the ion mobility spectrometry instrument successfully. The effect of the AC superposition mode on the drift time, ion intensity, and resolution of the ion mobility spectra was studied. Combined with electric field simulation and numerical calculation, a reasonable explanation for the effect of the AC superposition mode on the performance of ion mobility spectrometry is given. Two equations have been fitted by exponential fitting to correct the offset of the drift time. Cyclo-1,3,5-trimethylene-2,4,6-trinitramine (RDX) has been investigated to validate the effectiveness of the correction by using corona discharge IMS combined with the new ion shutter driving mode. The results show that the new low-cost power supply based on AC superposition mode is feasible.

Conservation of dimer peak intensity in ion mobility spectrometers with ketone-doped carrier gas

Doping of gases in ion mobility spectrometry (IMS) is a well-known method for improvement of detection selectivity. Ionization of analyte molecules in doped carrier gas occurs as a result of reactions with so-called alternative reactant ions containing molecules of dopant. Properties of these ions are different from those of the reactant ions found in pure carrier gas. Therefore, the dopant may influence the quantitative characteristics of detection in IMS. In this work, we present the results of studying the detection of two organophosphorus compounds, dimethyl methylphosphonate (DMMP) and triethyl phosphate (TEP), conducted in the presence of ketones containing 3–9 atoms of carbon in the molecule. Experiments were carried out with a generator of gas mixtures that allowed for simultaneous introduction of two substances into the carrier gas. Our investigations indicated that for the studied analyte/dopant systems, the presence of dopant does not influence the intensity of the signal generated by dimer analyte ions. This effect was observed for IMS instruments of different construction. Dimer ions peak intensity conservation is explained based on the ion–molecule reaction kinetics and the balance of ions in the reaction sections of IMS instruments.