Ion Cyclotron Radio Frequency Antenna Research Articles

Physical design and recent experimental results of the new ICRF antenna on EAST

Two new ICRF antennas operating in the ion cyclotron radio frequency (ICRF) range have been developed for EAST to overcome the low coupling problem of the original antennas. The original ICRF antennas were limited in their power capacity due to insufficient coupling. The new antenna design takes into account both wave coupling and absorption processes through comprehensive wave coupling and absorption codes, with the dominant parallel wave number of 7.5 m−1 at dipole phasing. Through the use of these new ICRF antennas, we are able to achieve 3.8 MW output power and 360 s operation, respectively. The initial experimental results demonstrate the reliability of the antenna design method.

Design of improved compact decoupler based on adjustable capacitor for EAST-ICRF antenna

The Ion Cyclotron Radio Frequency (ICRF) heating antenna on EAST adopts a decoupling device to constrain power coupling among the radiation straps, which was discovered shortcomings such as long size, poor contact, and etc. In order to improve these weak points, a new type decoupler with terminal-loaded tunable capacitor is designed to replace the previous design. Besides the capability of the tunable admittance parameters of decoupler, the withstand voltage of the capacitor is the most significant consideration for working under high power. Therefore, the theoretical analysis carefully elaborates the capacitor withstand voltage, and the detailed analytical equations and criteria for design are given. After the comparative analysis of theoretical calculation and 3D simulation results, the decoupler design scheme is finalized. The capacitor-loaded decoupler has been successfully adopted for ICRF antenna at port N on EAST, and achieved the optimization of adjacent port isolation from −22 to −58 dB at 37 MHz without plasma to restrict mutual coupling. The new design of the decoupler has greatly improved its compactness and automatic adjustment performance, and could be good solution for the decoupling network of ICRF antennas.

Formation of a Charged Layer in a Bounded Non-Uniform Magnetized Plasma in RF Field

A model of plasma dynamics in the box of an ICRF (ion cyclotron radio-frequency) antenna without Faraday shield used for the plasma heating in tokamaks is proposed. Formation of a macroscopic layer of oscillating charge that plays a role of a shield is predicted. Relation to phenomena observed in a scrape-off layer plasma is discussed.

Design of the Vacuum Feedthrough for the EAST ICRF Antenna

Detailed design of the vacuum feedthrough for the ion cyclotron radio frequency (ICRF) antenna in EAST, along with an electro-analysis and thermal structural analysis, is presented. The electric field, the voltage standing wave ratio (VSWR) and the stresses in the vacuum feedthrough are studied. A method using the rings of oxygen-free copper as the cushion and macro-beam plasma arc welding is applied in the assembly to protect the ceramic from being damaged during welding. The vacuum leak test on the prototype of vacuum feedthrough is introduced.

Curvature, Sphere Theorems, and the Ricci flow

An innovative tool has been realized for the 3D/1D simulation of Ion Cyclotron Radio Frequency (ICRF), i.e. accounting for antennas in a realistic 3D geometry and with an accurate 1D plasma model. The approach to the problem is based on an integral-equation formulation for the self-consistent evaluation of the current distribution on the conductors. The environment has been subdivided in two coupled region: the plasma region and the vacuum region. The two problems are linked by means of a magnetic current (electric field) distribution on the aperture between the two regions. In the vacuum region all the calculations are executed in the spatial domain while in the plasma region an extraction in the spectral domain of some integrals is employed that permits to significantly reduce the integration support and to obtain a high numerical efficiency leading to the practical possibility of using a large number of sub-domain (rectangular or triangular) basis functions on each solid conductor of the system. The plasma enters the formalism of the plasma region via a surface impedance matrix; for this reason any plasma model can be used; at present the FELICE code has been adopted, that affords density and temperature profiles, and FLR effects. The source term directly models the TEM mode of the coax feeding the antenna and the current in the coax is determined self-consistently, giving the input impedance/admittance of the antenna itself. Calculation of field distributions (both magnetic and electric), useful for sheath considerations, is included. This tool has been implemented in a suite, called TOPICA, that is modular and applicable to ICRF antenna structures of arbitrary shape. This new simulation tool can assist during the detailed design phase and for this reason can be considered a Virtual Prototyping Laboratory (VPL). The TOPICA suite has been tested against assessed codes and against measurements and data of mock-ups and existing antennas. The VPL is being used in the design of various ICRF antennas and also for the performance prediction of the ALCATOR C-MOD D antenna.

Optimization of the FAST ICRF antenna using TOPICA code

Ion Cyclotron Resonance Heating is one of the most important auxiliary heating systems in most plasma confinement experiments. Because of this, the need for very accurate design of ion cyclotron (IC) launchers has dramatically grown in recent years. Furthermore, a reliable simulation tool is a crucial request in the successful design of these antennas, since full testing is impossible outside experiments. One of the most advanced and validated simulation codes is TOPICA, which offers the possibility to handle the geometrical level of detail of a real antenna in front of an accurately described plasma scenario. Adopting this essential tool made possible to reach a refined design of ion cyclotron radio frequency antenna for the FAST (Fusion Advanced Studies Torus) experiment [1]. Starting from a streamlined antenna model and then following well-defined refinement procedures, an optimized launcher design in terms of power delivered to plasma has been finally achieved. The computer-assisted geometry refinements allowed an increase in the performances of the antenna and notably in power handling: the extent of the gained improvements were not experienced in the past, essentially due to the absence of predictive tools capable of analyzing the detailed effects of antenna geometry in plasma facing conditions. Thus, with the help of TOPICA code, it has been possible to comply with the FAST experiment requirements in terms of vacuum chamber constraints and power delivered to plasma. Once an antenna geometry was optimized with a reference plasma profile, the analysis of the performances of the launcher has been extended with respect to two plasma scenarios. Exploiting all TOPICA features, it has been possible to predict the behavior of the launcher in real operating conditions, for instance varying the position of the separatrix surface. In order to fulfil the analysis of the FAST IC antenna, the study of the RF potentials, which depend on the parallel electric field computation, has been carried out with an exceptional level of detail. Finally, in order to provide a more general overview of the antenna performances, two IC launchers have been simulated to determine their mutual influence, achieving an optimum degree of knowledge about the relevant features of the ion cyclotron heating system inside the FAST tokamak.

Resonance Cone Interaction With a Self-Consistent Radio-Frequency Sheath

We study the propagation of lower-hybrid-type resonance cones in a tenuous magnetized plasma, and, in particular, their interaction with, and reflection from, the plasma sheath near a conducting wall. The sheath is modeled as a vacuum gap whose width is given by the Child-Langmuir law. The application of interest is when the resonance cones are launched (parasitically) by an ion-cyclotron radio-frequency antenna in a typical rf-heated tokamak fusion experiment. We calculate the fraction of launched voltage in the resonance cones that is transmitted to the sheath, and show that it has a sensitive thresholdlike turn on when a critical parameter reaches order unity. Above threshold, the fractional voltage transmitted to the sheath is order unity, leading to strong and potentially deleterious rf-wall interactions in tokamak rf heating experiments. Below threshold, these interactions can be avoided.