Iodide Counterions Research Articles

Leveraging the Stereochemical Complexity of Octahedral Diastereomeric-at-Metal Catalysts to Unlock Regio-, Diastereo-, and Enantioselectivity in Alcohol-Mediated C-C Couplings via Hydrogen Transfer.

Experimental and computational studies illuminating the factors that guide metal-centered stereogenicity and, therefrom, selectivity in transfer hydrogenative carbonyl additions of alcohol proelectrophiles catalyzed by chiral-at-metal-and-ligand octahedral d6 metal ions, iridium(III) and ruthenium(II), are described. To augment or invert regio-, diastereo-, and enantioselectivity, predominantly one from among as many as 15 diastereomeric-at-metal complexes is required. For iridium(III) catalysts, cyclometalation assists in defining the metal stereocenter, and for ruthenium(II) catalysts, iodide counterions play a key role. Whereas classical strategies to promote selectivity in metal catalysis aim for high-symmetry transition states, well-defined low-symmetry transition states can unlock selectivities that are otherwise difficult to achieve or inaccessible.

Cationic Porphyrin-Based Ionic Nanomedicines for Improved Photodynamic Therapy.

This study presents the synthesis and characterization of monosubstituted cationic porphyrin as a photodynamic therapeutic agent. Cationic porphyrin was converted into ionic materials by using a single-step ion exchange reaction. The small iodide counteranion was replaced with bulky BETI and IR783 anions to reduce aggregation and enhance the photodynamic effect of porphyrin. Carrier-free ionic nanomedicines were then prepared by using the reprecipitation method. The photophysical characterization of parent porphyrin, ionic materials, and ionic nanomaterials, including absorbance, fluorescence and phosphorescence emission, quantum yield, radiative and nonradiative rate, and lifetimes, was performed. The results revealed that the counteranion significantly affects the photophysical properties of porphyrin. The ionic nanomaterials exhibited an increase in the reactive oxygen yield and enhanced cytotoxicity toward the MCF-7 cancer cell line. Examination of results revealed that the ionic materials exhibited an enhanced photodynamic therapeutic activity with a low IC50 value (nanomolar) in cancerous cells. These nanomedicines were mainly localized in the mitochondria. The improved light cytotoxicity is attributed to the enhanced photophysical properties and positive surface charge of the ionic nanomedicines that facilitate efficient cellular uptake. These results demonstrate that ionic material-based nanodrugs are promising photosensitizers for photodynamic therapy.

Characterizing Counterion-Dependent Aggregation of Rhodamine B by Classical Molecular Dynamics Simulations.

The aggregation in a solution of charged dyes such as Rhodamine B (RB) is significantly affected by the type of counterion, which can determine the self-assembled structure that in turn modulates the optical properties. RB aggregation can be boosted by hydrophobic and bulky fluorinated tetraphenylborate counterions, such as F5TPB, with the formation of nanoparticles whose fluorescence quantum yield (FQY) is affected by the degree of fluorination. Here, we developed a classical force field (FF) based on the standard generalized Amber parameters that allows modeling the self-assembling process of RB/F5TPB systems in water, consistent with experimental evidence. Namely, the classical MD simulations employing the re-parametrized FF reproduce the formation of nanoparticles in the RB/F5TPB system, while in the presence of iodide counterions, only RB dimeric species can be formed. Within the large, self-assembled RB/F5TPB aggregates, the occurrence of an H-type RB-RB dimer can be observed, a species that is expected to quench RB fluorescence, in agreement with the experimental data of FQY. The outcome provides atomistic details on the role of the bulky F5TPB counterion as a spacer, with the developed classical FF representing a step towards reliable modeling of dye aggregation in RB-based materials.

High-resolution structural study on pyridin-3-yl ebselen and its N-methylated tosylate and iodide derivatives.

The crystal structure of the pyridine-substituted benzisoselenazolinone 2-(pyridin-3-yl)-2,3-dihydro-1,2-benzoselenazol-3-one (C12H8N2OSe, 2), related to the antioxidant ebselen [systematic name: 2-phenyl-1,2-benzoselenazol-3(2H)-one, 1], is characterized by strong intermolecular N...Se(-N) chalcogen bonding, where the N...Se distance of 2.3831 (6) Å is well within the sum of the van der Waals radii for N and Se (3.34 Å). This strong interaction results in significant lengthening of the internal N-Se distance, consistent with significant population of the Se-N σ* antibonding orbital. Much weaker intermolecular O...Se chalcogen bonding occurs between the amide-like O atom in 2 and the less polarized C-Se bond in this structure. Charge density analysis of 2 using multipole refinement of high-resolution data allowed the electrostatic surface potential for 2 to be mapped, and clearly reveals the σ-hole at the extension of the Se-N bond as an area of positive electrostatic potential. Topological analysis of the electron-density distribution in 2 was carried out within the Quantum Theory of Atoms in Molecules (QTAIM) framework and revealed bond paths and (3,-1) bond critical points (BCPs) for the N...Se-N moiety consistent with a closed-shell interaction; however, the potential energy term is suggestive of electron sharing. Analysis of the electron localization function (ELF) for the strong N...Se and the weak O...Se chalcogen-bonding interactions in the structure of 2 suggest significant electron sharing in the former interaction, and a largely electrostatic interaction in the latter. Conversion of 2 to its N-methylated derivatives by reaction with methyl iodide [1-methyl-3-(3-oxo-2,3-dihydro-1,2-benzoselenazol-2-yl)pyridin-1-ium iodide, C13H11N2OSe+·I-] and methyl tosylate [1-methyl-3-(3-oxo-2,3-dihydro-1,2-benzoselenazol-2-yl)pyridin-1-ium toluenesulfonate trihydrate, C13H11N2OSe+·C7H7O3S-·3H2O] removes the possibility of N...Se chalcogen bonding and instead structures are obtained where the iodide and tosylate counter-ions fulfill the role of chalcogen-bond acceptors, with a strong I-...Se interaction in the iodide salt and a weaker p-Tol-SO3-...Se interaction in the tosylate salt.

DOTAP: Structure, hydration, and the counterion effect

The cationic lipid 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) is one of the original synthetic cationic lipids used for the liposomal transfection of oligonucleotides in gene therapy. The key structural element of DOTAP is its quaternary ammonium headgroup that is responsible for interactions with both nucleic acids and target cell membranes. Because these interactions are fundamental to the design of a major class of transfection lipids, it is important to understand the structure of DOTAP and how it interacts with halide counterions. Here, we use x-ray and neutron diffraction techniques to examine the structure of DOTAP and how chloride (Cl−) and iodide (I−) counterions alter the hydration properties of the DOTAP headgroup. A problem of particular interest is the poor solubility of DOTAP/I− in water solutions. Our results show that the poor solubility results from very tight binding of the I− counterion to the headgroup and the consequent expulsion of water. The structural principles we report here are important for assessing the suitability of DOTAP and its quaternary ammonium derivatives for transfection.

Silver N-heterocyclic carbene complexes are potent uncompetitive inhibitors of the papain-like protease with antiviral activity against SARS-CoV-2.

The ongoing SARS-CoV-2 pandemic has caused a high demand for novel innovative antiviral drug candidates. Despite promising results, metal complexes have been relatively unexplored as antiviral agents in general and in particular against SARS-CoV-2. Here we report on silver NHC complexes with chloride or iodide counter ligands that are potent inhibitors of the SARS-CoV-2 papain-like protease (PLpro) but inactive against 3C-like protease (3CLpro) as another SARS-CoV-2 protease. Mechanistic studies on a selected complex confirmed zinc removal from a zinc binding domain of PLpro as relevant factor of their activity. In addition, enzyme kinetic experiments revealed that the complex is an uncompetitive inhibitor and with this rare type of inhibition it offers great pharmacological advantages in terms selectivity. The silver NHC complexes with iodide ligands showed very low or absent host cell toxicity and triggered strong effects on viral replication in cells infected with SARS-CoV-2, making them promising future antiviral drug candidates.

Novel Polyelectrolytes Obtained by Direct Alkylation and Ion Replacement of a New Aromatic Polyamide Copolymer Bearing Pyridinyl Pendant Groups.

The following work shows, for the first time, the synthesis and characterization of a new family of polyelectrolytes, along with their preliminary assessments in terms of desalin water treatment. These materials fall into the category of aromatic co-polyamides, which are obtained by the direct condensation of monomers 4,4′-oxydianiline (ODA), isophthaloyl chloride, and 3,5-diamino-N-(pyridin-4-ylmethyl)benzamide (PyMDA). Thereby, the charged nature exhibited by these materials was achieved through the quaternization of PyMDA moieties using linear iodoalkanes of different lengths (CnI with n = 1, 2, 4, and 6). After completing the quaternization process, polyelectrolytes were subjected to a one-step anion substitution process, where iodide counterions were replaced by bis(trifluoromethane)sulfonamide entities. For all the obtained materials, solubility tests were carried out, showing that those alkylated with methyl and ethyl chains exhibit high solubility in rutinary aprotic polar solvents, while those containing n-butyl and n-hexyl units resulted in the formation of insoluble gels. Due to the above, the latest were discarded from this study early on. The structural characterization of the initial neutral co-polyamide was carried out by means of infrared spectroscopy (FT-IR), nuclear magnetic resonance (1H, 13C-NMR), and size-exclusion chromatography (SEC), while the structure of methylated and ethylated polyelectrolytes was successfully confirmed through FT-IR, 1H, 13C, and 19F-NMR. Additionally, the thermal behavior of these materials was analyzed in terms of thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), showing thermal degradation temperatures above 300 °C and glass transition temperatures (Tg) above 200 °C, resulting in polymers with outstanding thermal properties for water treatment applications. On the other hand, through the solvent-casting method, both neutral and charged polymers were found to be easily prepared into films, exhibiting a remarkably flexibility. The mechanical properties of the films were analyzed using the traction test, from which tensile strength values ranging between 83.5 and 87.9 Mpa, along with Young’s modulus values between 2.4 and 2.5 Gpa were obtained. Moreover, through contact angle measurements and absorption analysis by immersion, polyelectrolytes showed important changes in terms of affinity against polar and polar substances (water, n-heptane, and benzene), exhibiting a higher rejection regarding the neutral polymer. Finally, as a preliminary test against the seepage of saline waters, thin polymer films (from 11.4 to 17.1 µm) were deposited on top of commercial filter discs and tested as filters of saline solutions ([NaCl] = 1000 and 2000 ppm). These tests revealed a decrease of the salt concentration in the obtained filtrates, with retention values ranging between 6.2 and 20.3%, depending on the concentration of the former solution and the polymer used.

Ionic microenvironment constructed in quaternary ammonium modified polyacrylonitrile fiber for efficient CO2 fixation

Fiber-supported quaternary ammonium catalysts for the fixation of CO2 with epoxides were designed and prepared via amination and quaternization of polyacrylonitrile fiber, followed by ion exchange with different anions. The impact of different quaternary ammonium structures and counter anions on the reaction yields was investigated. A fiber catalyst (PANT-UdAF-I) with a C11 carboxylic acid chain and iodide counter anion exhibited excellent catalytic activity in the fixation of CO2 with epoxides under mild and solvent-free conditions (80 °C, 0.1 MPa) with a very low catalyst amount (0.5 mol%), and diverse cyclic carbonates were obtained in yields between 24–99 %. PANT-UdAF-I could be conveniently separated by filtration and showed good recyclability and durability till the 4th cycle. Novel cooperative catalytic mechanism is proposed where the ionic microenvironment plays a crucial role to stabilize the ionic intermediates and lowers the activation energy of the reaction.

Reducing the Competition: A Dual-Purpose Ionic Liquid for the Extraction of Gallium from Iron Chloride Solutions.

The separation of gallium from iron by solvent extraction from chloride media is challenging because the anionic chloridometalates, FeCl4− and GaCl4−, display similar chemical properties. However, we report here that the selective separation of gallium from iron in HCl solution can be achieved using the dual-purpose ionic liquid methyltrioctylammonium iodide in a solvent extraction process. In this case, the reduction of Fe3+ to Fe2+ by the iodide counterion was found to inhibit Fe transport, facilitating quantitative Ga extraction by the ionic liquid with minimal Fe extraction from 2 M HCl.

Tris[N,N-bis-(3,5-di-tert-butyl-benz-yl)di-thio-carbamato-κ2 S,S']-μ3-sulfido-tris-μ2-disulfido-triangulo-trimolybdenum(IV) iodide.

The title compound, [Mo3(C31H46NS2)3S7]I, crystallizes on a threefold rotational axis in P31c (space group No. 159). The [Mo3S7(S2CN(CH2C6H3-3,5- t Bu2)2)3]+ cations are arrayed in sheets in the ab plane with inter-ligand hydro-phobic inter-actions between tert-butyl groups guiding the packing arrangement. These cations form stacks parallel to the c axis with a separating distance of 10.9815 (6) Å (the c axis length) between the Mo3 centroids. On the underside of the cluster, opposite the μ3-S2- ligand, the iodide counteranion forms close contacts of 3.166 (2) Å with the sulfur atoms of the μ2-S2 2- ligands. These contacts are less than the sum of the van der Waals radii of the atoms (1.8 and 2.1 Å for S and I, respectively), thus indicating an appreciable degree of covalency to the [Mo3S7(S2CN(CH2C6H3-3,5- t Bu2)2)3]+⋯I- inter-actions.

Systematic Tuning of the Optical Properties of Discrete Complexes of EuII in Solution Using Counterions and Solvents.

We describe a systematic study of the influence of halides and solvents on the optical properties of EuII-containing complexes in solution starting from well-defined crystalline precursors. Anionic halides, chloride and bromide, blue-shift the spectroscopic properties of EuII, whereas neutral ligands, methanol and acetonitrile, cause a red shift. This system provides evidence that EuII has a stronger affinity for chloride, and to some extent bromide, relative to acetonitrile but not methanol. We also describe a simple procedure using an ion-exchange resin for the exchange of iodide counterions to hexafluorophosphate. These findings are a step toward designing ligands that can tune the optical properties of EuII-containing complexes for solution-based applications.

Redox-Driven Spontaneous Double Emulsion.

The formation of spontaneous double emulsions is a peculiar phenomenon in emulsion systems. When compared to the traditional one-step and two-step methods for preparing double emulsions, spontaneous emulsification can not only steadily load uniform water droplets into an oil phase, but can also facilitate the preparation of emulsions with higher stability. However, the limited solubility of salts, which are typically used to modify osmotic pressure, in organic oils has inhibited the viability of this method for the preparation of W/O/W double emulsions. In this paper, a redox-driven spontaneous emulsification method is developed and investigated. Instead of employing oil-soluble salts, an oxidation reaction is implemented in the oil phase, which produces cation radicals and iodide counterions to generate osmotic pressure. Additionally, amphiphilic polymer chains are harnessed as stabilizers for the newly formed W/O interfaces. Various characterization methods have been used to elucidate the mechanism of both the oxidation reaction and the spontaneous formation of double emulsions.

(Thio)urea containing quaternary ammonium salts for the CO2-fixation with epoxides

A detailed screening of differently substituted chiral and achiral (thio)urea-containing quaternary ammonium salts revealed their potential as catalysts for the CO2-fixation with epoxides to obtain cyclic carbonates in high yields under operationally simple atmospheric pressure conditions. Additional DFT calculations substantiate a mechanism involving an initial addition of the nucleophilic iodide counter anion of the ammonium salt to the H-bonding activated epoxide, followed by stepwise CO2-fixation and cyclization.Graphical abstract

Efficient Room-Temperature Phosphorescence of a Solid-State Supramolecule Enhanced by Cucurbit[6]uril.

Efficient emission of purely organic room-temperature phosphorescence (RTP) is of great significant for potential application in optoelectronics and photobiology. Herein, we report an uncommon phosphorescent effect of organic single molecule enhanced by resulting supramolecular assembly of host-guest complexation. The chromophore bromophenyl-methyl-pyridinium (PY) with different counterions as guests display various phosphorescence quantum yields from 0.4 % to 24.1 %. Single crystal X-ray diffraction results indicate that the chromophore with iodide counterion (PYI) exhibits the highest efficiency maybe due to the halogen-bond interactions. Significantly, the nanosupramolecular assembly of PY chloride complexation with the cucurbit[6]uril gives a greatly enhanced phosphorescent quantum yield up to 81.2 % in ambient. Such great enhancement is because of the strict encapsulation of cucurbit[6]uril, which prevents the nonradiative relaxation and promotes intersystem crossing (ISC). This supramolecular assembly concept with counterions effect provides a novel approach for the improvement of RTP.

Efficient Room‐Temperature Phosphorescence of a Solid‐State Supramolecule Enhanced by Cucurbit[6]uril

AbstractEfficient emission of purely organic room‐temperature phosphorescence (RTP) is of great significant for potential application in optoelectronics and photobiology. Herein, we report an uncommon phosphorescent effect of organic single molecule enhanced by resulting supramolecular assembly of host–guest complexation. The chromophore bromophenyl‐methyl‐pyridinium (PY) with different counterions as guests display various phosphorescence quantum yields from 0.4 % to 24.1 %. Single crystal X‐ray diffraction results indicate that the chromophore with iodide counterion (PYI) exhibits the highest efficiency maybe due to the halogen‐bond interactions. Significantly, the nanosupramolecular assembly of PY chloride complexation with the cucurbit[6]uril gives a greatly enhanced phosphorescent quantum yield up to 81.2 % in ambient. Such great enhancement is because of the strict encapsulation of cucurbit[6]uril, which prevents the nonradiative relaxation and promotes intersystem crossing (ISC). This supramolecular assembly concept with counterions effect provides a novel approach for the improvement of RTP.

Phosphorescence at Low Temperature by External Heavy-Atom Effect in Zinc(II) Clusters.

Luminescent ZnII clusters [Zn4 L4 (μ3 -OMe)2 X2 ] (X=SCN (1), Cl (2), Br (3)) and [Zn7 L6 (μ3 -OMe)2 (μ3 -OH)4 ]Y2 (Y=I- (4), ClO4 - (5)), HL=methyl-3-methoxysalicylate, exhibiting blue fluorescence at room temperature (λmax =416≈429 nm, Φem =0.09-0.36) have been synthesised and investigated in detail. In one case the external heavy-atom effect (EHE) arising the presence of iodide counter anions yielded phosphorescence with a long emission lifetime (λmax =520 nm, τ=95.3 ms) at 77 K. Single-crystal X-ray structural analysis and time-dependent density-functional theory (TD-DFT) calculations revealed that their emission origin was attributed to the fluorescence from the singlet ligand-centred (1 LC) excited state, and the phosphorescence observed in 4 was caused by the EHE of counter anions having strong CH-I interactions.

Interaction of difluoromethylene phosphobetaine with heteroatom-centered electrophiles

A series of difluorinated phosphonium salts were obtained by reaction of difluoromethylene phosphobetaine with halogenating reagents, as well as arylsulfenyl and arylselenyl chlorides. The reaction proceeds via decarboxylation of the phosphobetaine followed by trapping of the difluorinated phosphorus ylide by heteroatom-centered electrophiles. The crystal structures of the phosphonium salts were studied by X-ray diffraction analysis. For the salt containing the CF2I group and iodide counterion, the I⋯I interaction was identified in the solid state. The nature of this halogen bond was evaluated by quantum chemical calculations.

Halide-Rebound Polymerization of Twisted Amides.

The first living polymerization of twisted amides is reported, achieved using simple primary alkyl iodides as initiators. Polymerization occurs through a halide-rebound mechanism in which the nucleophilic twisted amide is quaternized and subsequently ring-opened by the iodide counterion. The covalent electrophilic polymerization generates polymers with living chain ends that are both isolable and stable to ambient conditions, enabling the synthesis of block polymers. This presents a new class of polymers for study that possess high glass transition temperatures and robust thermal stability.

Influence of Anion Variations on Morphological, Spectral, and Physical Properties of the Propidium Luminophore.

Propidium iodide (3,8-diamino-5-[3-(diethylmethylammonio)propyl]-6-phenylphenanthridinium diiodide, [P][I]), is a well-known red fluorescent dye that is widely used for biological applications such as staining. In this study, we have replaced the iodide counteranion of [P][I] with three hydrophobic and bulky organic anions, trifluoromethanesulfonate/[TfO], bis(trifluoromethanesulfonyl)imide/[NTf2], and bis(perfluoroethylsulfonyl)imide/[BETI], and have thus obtained a propidium-derived group of uniform materials based on organic salts (PGUMBOS). The morphological, spectral, and physical properties of these materials were investigated in order to understand the impact of anion variations. While [P][I] is a crystalline solid, propidium salts with [BETI] or [NTf2] counteranions, i.e., [P][BETI] and [P][NTf2], have significantly lower crystallinity as reflected in powder X-ray diffraction data. In addition, [P][BETI] and [P][NTf2] exhibited improved photothermal stability as compared to [P][I] when examined using thermogravimetric analysis and time-dependent kinetic fluorescence experiments under the given experimental conditions. Spectral and electronic properties of the propidium luminophore were not significantly changed upon anion variations, although fluorescence lifetimes and quantum yields showed a systematic increase with decreasing solvent polarity. The experimental HOMO-LUMO energy gaps of these compounds were ∼2 eV with energies of HOMO and LUMO orbitals obtained as -5.15 (±0.08) and -3.19 (±0.08) eV.

Imidazolate ionic liquids for high-capacity capture and reliable storage of iodine

Fast, efficient capture and safe storage of radioactive iodine is of great significance in nuclear energy utilization but still remains a challenge. Here we report imidazolate ionic liquids (Im-ILs) for rapid and efficient capture, and reliable storage of iodine. These Im-ILs can chemically capture iodine to form I-substituted imidazolate ILs with an iodide counterion and the newly formed ILs can absorb iodine to form polyiodide species and low-temperature eutectic salts. For example, choline imidazolate shows iodine capture capacities of 8.7 and 17.5 g of iodine per gram of IL at 30 and 100 oC, respectively, which are, to the best of our knowledge, higher than the values (0.5–4.3 g/g) reported to date. Importantly, iodine can be stably stored in the Im-IL absorbent systems even at 100 oC. The Im-ILs have potential for application in the capture and storage of radioactive iodine.