Inverse Temperature Transition Research Articles

Adsorption of Random Copolymer on a Chemically Heterogeneous Periodic Stripe-Patterned Surface

The adsorption of a single random copolymer chain containing correlations in a sequence on the chemically heterogeneous periodic surface with the alternating striped texture is studied theoretically. The problem is solved within the framework of a partially directed walk polymer model in three dimensions using the generating functions approach and the annealed disorder approximation for averaging over the ensemble of random sequences of units in the copolymer. Dependences of the adsorption transition point on the composition of the random copolymer and the degree of correlation in the random sequence of units for various periodic surfaces are presented. It is shown that for compositionally symmetric and weakly symmetric surfaces there is the optimal composition of the random copolymer and the degree of correlation in the sequence of units, at which the inverse temperature corresponding to the adsorption transition point has a local minimum. In the case of the compositionally symmetric surface, the “optimal” random copolymer is also symmetric in composition. For surfaces with a pronounced composition asymmetry the best adsorbent is a homopolymer complementary to sites that prevail on the surface. The degree of asymmetry range, in which the dependence of the inverse transition temperature on the copolymer composition and the correlation parameter exhibits the local minimum, is fairly narrow.

Random copolymer adsorption onto a periodic heterogeneous surface: A partially directed walk model.

The adsorption of a single AB random copolymer (RC) chain onto an inhomogeneous ab surface with a regular periodic pattern is studied theoretically. The problem is considered within the simplest model of a partially directed random walk in two dimensions by using the method of generating functions and the annealed approximation for the averaging over disorder in the RC sequence. The existence of the "optimal" RC composition and the degree of correlation in the monomer sequence, at which the inverse transition temperature has a local minimum, is shown. This is characteristic for symmetric and weakly asymmetric surfaces, whereas for surfaces with pronounced asymmetry there is no such local minimum. The best adsorbate for a strongly asymmetric surface is the homopolymer composed of monomer units that are complimentary to the majority sites on the surface. The results for the adsorption transition point obtained in the annealed approximation are compared with the numerical results for random-periodic AB-copolymers with a long period being a quenched random sequence of A and B units. The comparison shows that the annealed approximation provides a very good quantitative estimate of the adsorption transition point.

Impact of aromatic residues on the intrinsic disorder and transitional behaviour of model IDPs.

Understanding the interplay between order and disorder in intrinsically disorder proteins (IDPs), and its impact on the properties and features of materials manufactured from them, is a major challenge in the design of protein-based synthetic polymers intended for advanced functions. In this paper an elastin-like diblock co-recombinamer amphiphile (Phe-ELR) based on a hydrophobic block containing five phenylalanine (Phe) residues proximal to the carboxyl function of a glutamic acid (Glu) residue upon folding, and with Glu as the guest residue in the hydrophilic part, was engineered and its assembly behaviour compared with another amphiphilic ELR used as control. Phe-ELR was tailored in order to clarify the impact of the presence of aromatic residues in the amino acid sequence, which even in early studies by Urry's group already demonstrated a certain out-of-trend behaviour compared with other apolar amino acids, especially non-aromatic ones, on ELR behaviour. The combination of several experimental techniques indicates strong molecular interactions associated with the Phe residue, thus resulting in limited reversible character of the temperature-induced transitions during sequential thermal cycles, a lower than expected transition enthalpy, and clear differences in its supramolecular assembly with respect to the control ELR. A distinctive pre-aggregated state for the Phe-ELR under any condition of pH and temperature is found. Eventually, this state gives rise to Phe-core micelles or a solid jelly-like material, depending on the concentration, pH and presence of salts. In conclusion, it appears that the presence of aromatic residues and their ability to promote strong inter- and intramolecular interactions at any temperature and pH causes a complete modification of the order-disorder interplay present in other, non-aromatic ELRs. These molecular events have a profound impact on the physical properties of the resulting polymer when compared with other ELRs. This work helps to shed light on the limits that govern intrinsic disorder in ELRs beyond its inverse temperature transition.

Towards pure: The single-phase bulk omega titanium and modulation on its elastic properties under biaxial strains

Single-phase ω-phase Ti with a considerable size of 3 mm × 3 mm × 4 mm and a Vickers hardness of 2.5 GPa is synthesized under high pressure and combined with a designed experimental curve at room temperature. The elastic properties of the α- and ω-phase Ti are ascertained using the non-destructive ultrasonic through-transmission technique. Based on the investigated Raman spectra and DSC, the inverse transition temperature of the metastable ω-phase and Raman spectra of the α- and ω-structures are also discussed. Modulations on the elastic and spectral properties of the two phases are simulated using first-principles calculations to systematically investigate the mechanical responses under biaxial strains.

Thermo- and ion-responsive silk-elastin-like proteins and their multiscale mechanisms.

Silk-elastin-like protein (SELP) is an excellent biocompatible and biodegradable material for hydrogels with tunable properties that can respond to multiple external stimuli. By integrating fully atomistic, replica exchange molecular dynamics simulations with detailed experiments, we predict and measure structural responses to changes in temperature and ion concentration of a novel SELP sequence, as well as a diazonium-coupled version. A single SELP molecule shrinks at high temperatures, whereas diazonium coupling decreases this thermo-responsiveness. Diazonium coupling weakens electrostatic interactions, leading to an insignificant ionic response in the single chain, while also decreasing gelation rates by reducing the number of exposed dityrosine crosslink sites and their solvent-accessible surface areas. With further data from our coarse-grained crosslinked SELP model and our experiments, we find that three effects are critical for SELP cluster's physical response to external stimuli: (1) the structural transition of SELPs at high temperature, (2) the geometry restraints in hydrogel networks, and (3) the electrostatic interactions between molecules. This molecular understanding of the thermal and ion response in single molecules of SELPs and their crosslinked networks may further improve and help innovate SELP's stimuli-responsive properties, creating significant opportunities for applications in biomedical devices and other engineering applications.

Microphase Separation of Resilin-like and Elastin-like Diblock Copolypeptides in Concentrated Solutions.

Diblock copolymers are valued for their ability to form thin films with nanoscale features that typically reflect those of their microphase-separated structures in concentrated solution. Here, we show that such self-assembled structures can be easily formed with diblock copolymers composed of thermally responsive polypeptides, such as resilin-like polypeptides (RLP) and elastin-like polypeptides (ELP), by exploiting the inverse temperature transition behavior of ELPs in aqueous media. Specifically, we examine the self-assembly of a series of RLP-b-ELP diblock copolypeptides in concentrated aqueous solution (30 and 50 wt %) by small-angle X-ray scattering (SAXS). By systematically varying RLP block length and temperature (10-45 °C), we observed microphase separation into hexagonally packed cylinders and lamellae. By analyzing the observed order-order transitions (OOT) and order-disorder transitions (ODT), we determined that self-assembly in this system is primarily driven by polymer-solvent interactions. While these thermally responsive polymers showed clear ODTs and OOTs at certain temperatures, temperature only had a weak effect on the spacing of the resulting nanostructures. In contrast, we found that nanostructure spacing was far more sensitive to RLP block length. Finally, we used atomic force microscopy (AFM) to demonstrate that spin casting RLP-b-ELP diblock copolypeptides also produce nanostructured thin films with spacings that correlate with those in concentrated solution.

Improved coarse-grained model for studying sequence dependent phase separation of disordered proteins.

We present improvements to the hydropathy scale (HPS) coarse-grained (CG) model for simulating sequence-specific behavior of intrinsically disordered proteins (IDPs), including their liquid-liquid phase separation (LLPS). The previous model based on an atomistic hydropathy scale by Kapcha and Rossky (KR scale) is not able to capture some well-known LLPS trends such as reduced phase separation propensity upon mutations (R-to-K and Y-to-F). Here, we propose to use the Urry hydropathy scale instead, which was derived from the inverse temperature transitions in a model polypeptide with guest residues X. We introduce two free parameters to shift (Δ) and scale (µ) the overall interaction strengths for the new model (HPS-Urry) and use the experimental radius of gyration for a diverse group of IDPs to find their optimal values. Interestingly, many possible (Δ, µ) combinations can be used for typical IDPs, but the phase behavior of a low-complexity (LC) sequence FUS is only well described by one of these models, which highlights the need for a careful validation strategy based on multiple proteins. The CG HPS-Urry model should enable accurate simulations of protein LLPS and provide a microscopically detailed view of molecular interactions.

Insights into the miscibility characteristics of plastic-mimetic polypeptide with hydroxypropylmethylcellulose: Investigation of thermal degradability and intermolecular interactions

In this investigation, we integrated the parent recurring sequence of the plastic-derived polypeptide, poly[0.8(AVGVP),0.2(AEGVP)] (A, V, G, P, and E represents Alanine, Valine, Glycine, Proline, and Glutamic acid respectively) followed by characterization with inverse transition temperature, 13C, and 1H-NMR spectroscopy. The miscibility attributes of poly[0.8(AVGVP),0.2(AEGVP)] with Hydroxypropylmethylcellulose was examined both in aqueous and solid-phase. The Huggins’ co-efficient [KH], the intrinsic viscosity [η], the interaction parameters ΔB and μ suggested by Chee, ΔK and β recommended by Jiang and Han, α by Sun, Δ[η]m by Garcia showed that the polypeptide was miscible with HPMC in all proportions. DSC studies revealed single Tg values, and TGA manifested the enhanced thermal stability for all the proportions compared with their individuals. Further, verified the results by SEM and XRD. The FTIR evidenced existence of intermolecular hydrogen bonding between the two constituent polymers that caused the miscible blend system.

Fusion to elastin-like polypeptide increases production of bioactive human IFN-γ in tobacco.

The plant-based expression systems are now accredited as bioreactors for the high production of various biopharmaceuticals. However, low levels of agglomeration and the absence of effective procedures for purification of recombinant proteins have remained two essential obstacles in molecular farming. In this research, we have studied the production of human interferon gamma (hIFN-γ) in tobacco and analyzed the effects of elastin-like polypeptide (ELP) tag and subcellular localization on its accumulation. We report a remarkable enhancement of accumulation of the fusion proteins versus the corresponding unfused hIFN-γ proteins. Furthermore, the hIFN-γ (with and without ELP) accumulated to higher levels in the endoplasmic reticulum. The ELP fusion proteins were successfully recovered from total soluble protein with adding 2.75M NaCl and three rounds of inverse transition cycling (ITC). The hIFN-γ was also separated from ELP with Enterokinase cleavage of the fusion protein and recovered by ITC. Inverse transition analysis indicated that the hIFN-γ-ELP variants aggregate above their inverse transition temperature and at high ionic strength. Investigation of glycosylation revealed that fused or unfused hIFN-γ proteins are N-glycosylated in different cellular locations. Moreover, N-glycosylation analysis and bioassay showed that fusion to ELP does not disturb glycosylation process and antiviral activity of hIFN-γ.

Application of short hydrophobic elastin-like polypeptides for expression and purification of active proteins.

To investigate the application of short elastin-like polypeptides (ELPs) in the purification of bioactive proteins, short hydrophobic ELP[I] n (n = 30, 40, 50) tags were constructed. Both the ELP[I] n tags and the ELP[I] n -Trx fusion proteins could be stably expressed in Escherichia coli and purified by inverse transition cycling, respectively. Total protein concentrations determined by BCA protein assay showed that the yield of the fusion proteins decreased with increasing ELP length. Measurements of the inverse transition temperature (T t) of the ELP[I] n -Trx under different salts or PEG8000 concentrations showed decreased T t upon elevated concentrations; while, all the T ts were suitable for generating proteins from 4 to 37.5ºC. Furthermore, to identify a linker peptide for bioactive protein production without the need to remove the ELP[I] n tag, the activity of eGFP protein fused with ELP[I]30 tag by either a poly-N or a G4S linker was quantified using a fluorescence spectrophotometer. The results indicated that the ELP[I]30-eGFP fusion proteins with the poly-N linker showed higher fluorescence levels than those with the G4S linker. Our results demonstrated that short ELP[I] n tags with low T t were useful in protein expression and purification, and poly-N linker played the key role in producing bioactive proteins without the need to remove the ELPs.

Glucose-induced structural changes and anomalous diffusion of elastin

Elastin is the principal protein component of elastic fiber, which renders essential elasticity to connective tissues and organs. Here, we adopted a multi-technique approach to study the transport, viscoelastic, and structural properties of elastin exposed to various glucose concentrations (X=[gluc]/[elastin]). Laser light scattering experiments revealed an anomalous behavior (anomaly exponent, β <0.6) of elastin. In this regime (β <0.6), the diffusion constant decreases by 40% in the presence of glucose (X> 10), which suggests the structural change in elastin. We have observed a peculiar inverse temperature transition of elastin protein, which is a measure of structural change, at 40 °C through rheology experiments. Moreover, we observe its shift towards lower temperature with a higher X. FTIR revealed that the presence of glucose (X < 10) favors the formation of β-sheet structure in elastin. However, for X > 10, dominative crowding effect reduces the mobility of protein and favors the increase in β-turns and γ-turns by 25 ± 1% over the β-sheet (β-sheet decreases by 12 ± 0.8%) and α-helix (α-helix decreases by 13 ± 0.8%). The stiffness of protein is estimated through Flory characteristic ratio, C∞ and found to be increasing with X. These glucose-based structural changes in the elastin may explain the role of glucose in age-related issues of the skin.

Manipulation of the dually thermoresponsive behavior of peptide-based vesicles through modification of collagen-like peptide domains.

Materials that respond to temporally defined exogenous cues continue to be an active pursuit of research toward on‐demand nanoparticle drug delivery applications, and using one or more exogenous temperature stimuli could significantly expand the application of nanoparticle‐based drug delivery formulations under both hyperthermal and hypothermal conditions. Previously we have reported the development of a biocompatible and thermoresponsive elastin‐b‐collagen‐like polypeptide (ELP‐CLP) conjugate that is capable of self‐assembling into vesicles and encapsulating small molecule therapeutics that can be delivered at different rates via a single temperature stimulus. Herein we report the evaluation of multiple ELP‐CLP conjugates, demonstrating that the inverse transition temperature (T t) of the ELP‐CLPs can be manipulated by modifying the melting temperature (T m) of the CLP domain, and that the overall hydrophilicity of the ELP‐CLP conjugate also may alter the T t. Based on these design parameters, we demonstrate that the ELP‐CLP sequence (VPGFG)6‐(GPO)7GG can self‐assemble into stable vesicles at 25°C and dissociate at elevated temperatures by means of the unfolding of the CLP domain above its T m. We also demonstrate here for the first time the ability of this ELP‐CLP vesicle to dissociate via a hypothermic temperature stimulus by means of exploiting the inverse transition temperature (T t) phenomena found in ELPs. The development of design rules for manipulating the thermal properties of these bioconjugates will enable future modifications to either the ELP or CLP sequences to more finely tune the transitions of the conjugates for specific biomedical applications.

Self-Assembly of Stable Nanoscale Platelets from Designed Elastin-like Peptide-Collagen-like Peptide Bioconjugates.

The self-assembly of nanostructures from elastin-like (poly)peptide (ELP) containing block copolymers has been a subject of intense investigation over decades. However, short synthetic ELPs have rarely been used due to their high inverse transition temperature; the use of short ELPs has largely been limited to polymer conjugates. Motivated by our previous work which successfully overcame this barrier by simply conjugating short ELPs with a triple-helix-forming collagen-like peptide, in this study, we further extend the ELP library to a series of ELPs equipped with aromatic residues and having sequences as short as four pentapeptide motifs. The resulting elastin-like peptide-collagen-like peptide (ELP-CLP) bioconjugates unexpectedly self-assembled into nanosized platelets likely by forming a bilayer structure. Given the previously demonstrated ability of many other CLP conjugates to target collagens and the potential for encapsulation of hydrophobic drugs in collapsed ELPs, these ELP-CLP nanoplatelets may offer similar opportunities for targeted delivery in biomedical and other arenas.

Elastin-like Peptide in Confinement: FT-IR and NMR T 1 Relaxation Data

Abstract We employed FT-IR and NMR experiments to investigate the influence of a cell-mimicking crowding environment on the structure and dynamics of an elastin-like peptide (ELP) with the sequence GVG(VPGVG)3, which – due to a high number of hydrophobic amino acid side chains – exhibits an inverse temperature transition (ITT). As simplified crowding agent, we used 30 wt% Ficoll. The FT-IR data revealed the well-known broad ITT above ~25°C, as observed by the decrease of the relative population of random coil structures and the concomitant increase of type II β-turns. Interestingly, the addition of Ficoll leads to a destabilizing effect of type II β-turn structures. This is in contrast to the expected excluded-volume effect of the macromolecular crowder, but can be explained by weak interactions of the peptide with the polysaccharide chains of the crowding agent. Further, the crowding agent leads to the onset of a reversal of the folding transition at high temperatures. The full assignment of the ELP allowed for a residue-specific investigation of the dynamic behavior of ELP by NMR. Due to a strong change of microscopic viscosity between native/buffered conditions and crowded conditions, relaxation data remain inconclusive with respect to the observation of an ITT. Hence, no quantitative details in terms of internal conformational changes can be obtained. However, temperature dependent differences in the 13C relaxation behavior between core and terminal parts of the peptide indicate temperature induced changes in the internal dynamics with generally higher internal mobility at chain ends: This is in full agreement with FT-IR data. In harmony with the FT-IR analysis, macromolecular crowding does not lead to significant changes in the relaxation behavior.

Sequence Directionality Dramatically Affects LCST Behavior of Elastin-Like Polypeptides.

Elastin-like polypeptides (ELP) exhibit an inverse temperature transition or lower critical solution temperature (LCST) transition phase behavior in aqueous solutions. In this paper, the thermal responsive properties of the canonical ELP, poly(VPGVG), and its reverse sequence poly(VGPVG) were investigated by turbidity measurements of the cloud point behavior, circular dichroism (CD) measurements, and all-atom molecular dynamics (MD) simulations to gain a molecular understanding of mechanism that controls hysteretic phase behavior. It was shown experimentally that both poly(VPGVG) and poly(VGPVG) undergo a transition from soluble to insoluble in aqueous solution upon heating above the transition temperature ( Tt). However, poly(VPGVG) resolubilizes upon cooling below its Tt, whereas the reverse sequence, poly(VGPVG), remains aggregated despite significant undercooling below the Tt. The results from MD simulations indicated that a change in sequence order results in significant differences in the dynamics of the specific residues, especially valines, which lead to extensive changes in the conformations of VPGVG and VGPVG pentamers and, consequently, dissimilar propensities for secondary structure formation and overall structure of polypeptides. These changes affected the relative hydrophilicities of polypeptides above Tt, where poly(VGPVG) is more hydrophilic than poly(VPGVG) with more extended conformation and larger surface area, which led to formation of strong interchain hydrogen bonds responsible for stabilization of the aggregated phase and the observed thermal hysteresis for poly(VGPVG).

Macroporous click-elastin-like hydrogels for tissue engineering applications

Elastin is a key extracellular matrix (ECM) protein that imparts functional elasticity to tissues and therefore an attractive candidate for bioengineering materials. Genetically engineered elastin-like recombinamers (ELRs) maintain inherent properties of the natural elastin (e.g. elastic behavior, bioactivity, low thrombogenicity, inverse temperature transition) while featuring precisely controlled composition, the possibility for biofunctionalization and non-animal origin. Recently the chemical modification of ELRs to enable their crosslinking via a catalyst-free click chemistry reaction, has further widened their applicability for tissue engineering. Despite these outstanding properties, the generation of macroporous click-ELR scaffolds with controlled, interconnected porosity has remained elusive so far. This significantly limits the potential of these materials as the porosity has a crucial role on cell infiltration, proliferation and ECM formation. In this study we propose a strategy to overcome this issue by adapting the salt leaching/gas foaming technique to click-ELRs. As result, macroporous hydrogels with tuned pore size and mechanical properties in the range of many native tissues were reproducibly obtained as demonstrated by rheological measurements and quantitative analysis of fluorescence, scanning electron and two-photon microscopy images. Additionally, the appropriate size and interconnectivity of the pores enabled smooth muscle cells to migrate into the click-ELR scaffolds and deposit extracellular matrix. The macroporous structure together with the elastic performance and bioactive character of ELRs, the specificity and non-toxic character of the catalyst-free click-chemistry reaction, make these scaffolds promising candidates for applications in tissue regeneration. This work expands the potential use of ELRs and click chemistry systems in general in different biomedical fields.

Rapid and simple purification of elastin-like polypeptides directly from whole cells and cell lysates by organic solvent extraction.

Elastin-like polypeptides (ELP) are a well-known class of proteins that are being increasingly utilized in a variety of biomedical applications, due to their beneficial physicochemical properties. A unifying feature of ELP is their demonstration of a sequence tunable inverse transition temperature (Tt) that enables purification using a simple, straightforward process called inverse transition cycling (ITC). Despite the utility of ITC, the process is inherently limited to ELP with an experimentally accessible Tt. Since the underlying basis for the ELP Tt is related to its high overall hydrophobicity, we anticipated that ELP would be excellent candidates for purification by organic extraction. We report the first method for rapidly purifying ELP directly from whole E. coli cells or clarified lysates using pure organic solvents and solvent mixtures, followed by aqueous back extraction. Our results show that small ELP and a large ELP-fusion protein can be isolated in high yield from whole cells or cell lysates with greater than 95% purity in less than 30 min and with very low levels of LPS and DNA contamination.

Modeling and Experiment Reveal Structure and Nanomechanics across the Inverse Temperature Transition in B. mori Silk-Elastin-like Protein Polymers.

Silk and elastin are exemplary protein materials that exhibit exceptional material properties. Silk is uniquely strong, surpassing engineering materials such as Kevlar and steel, while elastin has exquisite flexibility and can reversibly fold into a more structured form at high temperatures when many other proteins would unfold and denature. This phenomenon in elastin is termed the inverse temperature transition. It is a reversible, controllable process that motivates applications in drug delivery, shape change materials, and biomimetic devices. Silk-elastinlike protein polymers (SELPs), which combine repeating B. mori silk and elastin blocks, have been introduced as biologically inspired materials that combine the distinctive properties of the component parts to achieve strong and extensible, tunable biomaterials. Here, we considered a single SELP sequence to examine temperature transition effects at the molecular scale. SELP molecular models were created using Replica Exchange Molecular Dynamics, an accelerated sampling method, and confirmed in experiment by comparing secondary structure distributions. A molecular collapse of the SELP molecule was observed with increased temperature in both molecular simulation and experiment. Temperature-specific differences were observed in the mechanical properties and the unfolding pathways of the polypeptide. Using the Bell-Evans model, we analyzed the free energy landscape associated with molecular unfolding at temperatures below and above the transition temperature range (Tt) of the polypeptide. We found that at physiological pulling rates, the energy barrier to unfold SELPs was counterintuitively higher above Tt. Our findings offer a foundational perspective on the molecular scale mechanisms of temperature-induced phase transition in SELPs, and suggest a novel approach to combine simulation and experiment to study materials for multifunctional biomimetic applications.

Thermosensitive elastin-derived polypeptide hydrogels crosslinked by genipin

ABSTRACTIn this paper, first, elastin-derived peptides (EPs) with low molecular weight were prepared by acid degradation. Second, elastin-derived peptide hydrogels were fabricated by crosslinking EP with genipin. EP exhibited an inverse transition temperature, and the inverse transition temperature (Tt) could be adjusted by changing the concentration and molecular weight of EP, pH, and adding salt. The freeze-dried EP hydrogels were obviously three-dimensional network structure and the property of EP hydrogel can be optimized by dosage of genipin. Differential scanning calorimetry (DSC) tests and the swelling ratio changing with temperature showed the crosslinked EP hydrogels were still thermosensitive and exhibited a negative swelling behavior. The compression modulus of EP hydrogels can even reach 39.4 kPa, surpassing many other elastin-based hydrogels. This genipin crosslinked EP hydrogel is a good biological material and has great potentiality in tissue engineering.

Intrafibrillar Mineralization of Self-Assembled Elastin-Like Recombinamer Fibrils.

Biomineralization of bone, a controlled process where hydroxyapatite nanocrystals preferentially deposit in collagen fibrils, is achieved by the interplay of the collagen matrix and noncollagenous proteins. Mimicking intrafibrillar mineralization in synthetic systems is highly attractive for the development of advanced hybrid materials with elaborated morphologies and outstanding mechanical properties, as well as understanding the mechanisms of biomineralization. Inspired by nature, intrafibrillar mineralization of collagen fibrils has been successfully replicated in vitro via biomimetic systems, where acidic polymeric additives are used as analogue of noncollagenous proteins in mediating mineralization. The development of synthetic templates that mimic the structure and functions of collagenous matrix in mineralization has yet to be explored. In this study, we demonstrated that self-assembled fibrils of elastin-like recombinamers (ELRs) can induce intrafibrillar mineralization. The ELRs displayed a disordered structure at low temperature but self-assembled into nanofibrils above its inverse transition temperature. In the presence of the self-assembled ELR fibrils, polyaspartate-stabilized amorphous calcium phosphates preferentially infiltrated into the fibrils and then crystallized into hydroxyapatite nanocrystals with their [001] axes aligned parallel to the long axis of the ELR fibril. As the recombinant technology enables designing and producing well-defined ELRs, their molecular and structural properties can be fine-tuned. By examining the ultrastructure of the self-assembled ELRs fibrils as well as their mineralization, we concluded that the spatial confinement formed by a continuum β-spiral structure in an unperturbed fibrillar structure rather than electrostatic interactions or bioactive sequences in the recombinamer composition played the crucial role in inducing intrafibrillar mineralization.