Invasive Instrumentation Research Articles

Upper Thoracic Pyogenic Spondylitis With a Paravertebral Abscess Treated With a Combination of Cranked Minimally Invasive Spinal Instrumentation and Negative Pressure Wound Therapy: A Case Report

Upper Thoracic Pyogenic Spondylitis With a Paravertebral Abscess Treated With a Combination of Cranked Minimally Invasive Spinal Instrumentation and Negative Pressure Wound Therapy: A Case Report

Safety and efficacy of short percutaneous fixation in AO3 and AO4 lumbar fractures: a single-centre experience of 35 cases.

Spinal fractures with subsequent bone fragment dislocation are among the injuries most feared by patients and physicians. The surgical strategy is tailored to the individual patient's characteristics and often consists of pedicle instrumentation with rod-screw systems. Short instrumentation has been associated with worse spinal correction and increased complications. However, recent studies have suggested similar results in terms of kyphosis correction and the maintenance of sagittal alignment compared to longer instrumentation. This single-center retrospective study was conducted between January 2018 and April 2021. We included 35 single lumbar burst fractures AO Spine grade A3 or A4 with evidence of intra-canal fragments. Patients underwent minimally invasive percutaneous posterior lumbar instrumentation with pedicle screws. Patients received short segmental fixation involving only one level above and below the fractured vertebra. An immediate postoperative computed tomography (CT) scan demonstrated a significant reduction in vertebral kyphotic deformation (11.7° ± 1.6 vs 16.7° ± 5, p<0.001) and sagittal Cobb angle (9.8° ± 1.3 vs 11.7° ± 1.5, p < 0.001). The correction was slightly reduced but remained significant at 12 months for both kyphotic (12.3° ± 1.4, p = 0.03) and sagittal Cobb (10.3° ± 0.9, p = 0.04). Upper lumbar vertebrae showed even larger correction indices compared to lower lumbar segments. No implant failure or screws pullout was seen at the last follow-up. Short spinal fixation is a safe and effective treatment of complete and incomplete burst fractures with posterior bone fragment dislocation. All included patients fared well and achieved good kyphotic correction with no perioperative or long-term complications.

The Future of Artificial Intelligence in Surgery.

Until recently, innovations in surgery were largely represented by extensions or augmentations of the surgeon's perception. This includes advancements such as the operating microscope, tumor fluorescence, intraoperative ultrasound, and minimally invasive surgical instrumentation. However, introducing artificial intelligence (AI) into the surgical disciplines represents a transformational event. Not only does AI contribute substantively to enhancing a surgeon's perception with such methodologies as three-dimensional anatomic overlays with augmented reality, AI-improved visualization for tumor resection, and AI-formatted endoscopic and robotic surgery guidance. What truly makes AI so different is that it also provides ways to augment the surgeon's cognition. By analyzing enormous databases, AI can offer new insights that can transform the operative environment in several ways. It can enable preoperative risk assessment and allow a better selection of candidates for procedures such as organ transplantation. AI can also increase the efficiency and throughput of operating rooms and staff and coordinate the utilization of critical resources such as intensive care unit beds and ventilators. Furthermore, AI is revolutionizing intraoperative guidance, improving the detection of cancers, permitting endovascular navigation, and ensuring the reduction in collateral damage to adjacent tissues during surgery (e.g., identification of parathyroid glands during thyroidectomy). AI is also transforming how we evaluate and assess surgical proficiency and trainees in postgraduate programs. It offers the potential for multiple, serial evaluations, using various scoring systems while remaining free from the biases that can plague human supervisors. The future of AI-driven surgery holds promising trends, including the globalization of surgical education, the miniaturization of instrumentation, and the increasing success of autonomous surgical robots. These advancements raise the prospect of deploying fully autonomous surgical robots in the near future into challenging environments such as the battlefield, disaster areas, and even extraplanetary exploration. In light of these transformative developments, it is clear that the future of surgery will belong to those who can most readily embrace and harness the power of AI.

Cutting force estimation from machine learning and physics-inspired data-driven models utilizing accelerometer measurements

Monitoring cutting forces for process control may be challenging because force measurements typically require invasive instrumentation. To remedy this situation, two new methods were recently developed to estimate cutting forces in real time based on the use of on-machine accelerometer measurements. One method uses machine learning, while another uses a physics-inspired data-driven approach, to generate a model that estimates cutting forces from on-machine accelerations. The estimated forces from both approaches were compared against cutting force data collected during various milling operations on several machine tools. The results reveal the advantages and disadvantages of each model to estimate real-time cutting forces.

Clinical Experience of a Smart Articulating Digital Device for Transanal Minimally Invasive Surgery.

The constrained access associated with transanal minimally invasive surgery has led surgeons to deploy robotic-assisted platforms to offset inherent maneuverability limitations and, perhaps, skills deficits. A handheld, powered 5-mm lightweighted laparoendoscopic electromechanical digital device (HandX, HumanXtensions, Israel) with hardware and software components that convert surgical hand movements precisely to the instrument's articulating tip and enable robotic transanal minimally invasive surgery with full tip roticulation for hook diathermy and suturing. After bench and biomedical model training, HandX was used in 3 transanal minimally invasive surgery procedures (2 male patients and 1 female patient, mean age 66.3 years). The rectal lesions averaged 30 mm in maximum dimension and were located posteriorly (n = 2) and laterally (n = 1) a mean of 3 cm from the anal verge. Standard transanal minimally invasive surgery setup and instrumentation (Gelport Path, Applied Medical with Airseal, and Conmed) were used, adding the HandX device for circumferential lesion marking and hemostatic full-thickness excision as well as defect suturing where appropriate. All procedures were completed without undue prolongation (operating times <1 hour) despite nuisance hemorrhoidal bleeding in 1 patient. All lesions were fully excised, with 2 being T1 cancers and 1 tubulovillous adenoma with high-grade dysplasia. All patients were discharged within 48 hours postoperatively (1 experienced secondary hemorrhage on postoperative day 5). HandX capably facilitated endoscopic robot-like instrument movement for transanal minimally invasive surgery without disrupting workflows. With time dedicated to instrument understanding and training, HandX increased dexterity with a small operating room footprint and may offer greater cost-effectiveness than other platforms.

Risk factors for kyphosis recurrence after implant removal in percutaneous osteosynthesis for post-traumatic thoracolumbar fracture.

Short-segment minimally invasive percutaneous spinal osteosynthesis has now become one of the treatments of choice to treat thoracolumbar fractures. The question of implant removal once the fracture has healed is still a matter of debate since this procedure can be associated with loss of sagittal correction. Therefore, we analyzed risk factors for kyphosis recurrence after spinal implants removal in patients treated with short-segment minimally invasive percutaneous spinal instrumentation for a thoracolumbar fracture. A total of 32 patients who underwent implant removal in percutaneous osteosynthesis for post-traumatic thoracolumbar fracture were enrolled in our study. Patient's medical record, operative report and imaging examinations carried out at the trauma and during the follow-up were analyzed. Every patient experienced fracture union. Vertebral kyphotic angle (VKA) and Cobb angle (CA) improved significantly after stabilization surgery. VKA, CA, upper disk kyphotic angle (UDKA) and lower disk kyphotic angle (LDKA) significantly gradually decreased during follow-up. Traumatic disk injury (p: 0.001), younger age (p: 0.01), canal compromise (p: 0.04) and importance of surgical correction (p < 0.001) were significantly associated with kyphosis recurrence after implant removal. Anterior body augmentation did not affect loss of correction (CA and VKA) during the follow-up period (p: 0.57). Despite correction of the fracture after stabilization, we observed a progressive loss of correction over time appearing even before implant removal. Particular attention should be paid to post-traumatic disk damage or canal invasion, to young patients and to surgical overcorrection of the traumatic kyphosis.

Impact of sternotomy and pericardiotomy on cardiopulmonary haemodynamics in a large animal model.

What is the central question of this study? Invasive cardiovascular instrumentation can occur through closed- or open-chest approaches. To what extent will sternotomy and pericardiotomy affect cardiopulmonary variables? What is the main finding and its importance? Opening of the thorax decreased mean systemic and pulmonary pressures. Left ventricular function improved, but no changes were observed in right ventricular systolic measures. No consensus or recommendation exists regarding instrumentation. Methodological differences risk compromising rigour and reproducibility in preclinical research. Animal models of cardiovascular disease are often evaluated by invasive instrumentation for phenotyping. As no consensus exists, both open- and closed-chest approaches are used, which might compromise rigour and reproducibility in preclinical research. We aimed to quantify the cardiopulmonary changes induced by sternotomy and pericardiotomy in a large animal model. Seven pigs were anaesthetized, mechanically ventilated and evaluated by right heart catheterization and bi-ventricular pressure-volume loop recordings at baseline and after sternotomy and pericardiotomy. Data were compared by ANOVA or the Friedmann test where appropriate, with post-hoc analyses to control for multiple comparisons. Sternotomy and pericardiotomy caused reductions in mean systemic (-12±11mmHg, P=0.027) and pulmonary pressures (-4±3mmHg, P=0.006) and airway pressures. Cardiac output decreased non-significantly (-1329±1762ml/min, P=0.052). Left ventricular afterload decreased, with an increase in ejection fraction (+9±7%, P=0.027) and coupling. No changes were observed in right ventricular systolic function or arterial blood gases. In conclusion, open- versus closed-chest approaches to invasive cardiovascular phenotyping cause a systematic difference in key haemodynamic variables. Researchers should adopt the most appropriate approach to ensure rigour and reproducibility in preclinical cardiovascular research.

EARLY RESULTS OF THE FEMORAL NECK SYSTEM IN FIXATION OF FEMORAL NECK FRACTURES

The Femoral Neck System (FNS) was introduced as an alternative device for the fixation of neck of femur fractures (NOFFs). The purported advantages include superior angular and rotatory stability compared to multiple cancellous screws, via a minimally invasive instrumentation that is simpler than conventional fixed angle devices. There were limited clinical studies regarding the utility of this device. We aimed to study the outcomes of NOFFs fixed with the FNS.This was a single-institution, retrospective review of all undisplaced elderly (≥60 years old) undisplaced young, and displaced young NOFFs fixed with the FNS. Demographics, surgical parameters, radiographic parameters, and clinical outcomes including complications were reviewed.Thirty-six subjects with a median age of 75 [44,89] years old, had NOFF fixation using the FNS. Thirty-one (86.1%) had undisplaced fractures. There were 6 (16.7%), 26 (72.2%), and 4 (11.1%) subjects with Pauwels types 1, 2, and 3 respectively. Thirty-two (88.9%) had posterior tilt of &lt;20º. The mean duration of surgery was 71±18 minutes. Excluding 4 patients whom required revision surgery, 2 patients whom demised, and 10 patients whom defaulted reviews, the mean follow-up duration was 55±13 weeks. Four complications were recorded, namely implant cut out at the femoral head at week 8, breaking of the locking screw at the run-off region at week 22, avascular necrosis at week 25, and a refracture following near fall, causing the fracture to fail in varus at week 7 postoperation.While reasonably fast to instrument, failures still occur and it is likely multifactorial. However, the rate of reoperation is lower than what has been reported for NOFFs fixed with the a fixed-angle device or 3 cancellous screws. In conclusion, the FNS is a reasonably safe instrument to use. Surgeons’ discretion is still needed in patient selection, keeping in mind the need for satisfactory radiological parameters.

Minimally Invasive Instrumentation of the Cervical Spine: Past, Present, and Future.

Posterior cervical instrumentation and fusion procedures are becoming more and more common with the aging population and rising numbers of multisegmental and revision procedures. The instrumentation of the cervical spine has so far been performed almost exclusively via open approaches. Over the past two decades, minimally invasive surgery (MIS) techniques have gained increasing popularity. To date, only a few attempts to instrument the cervical spine in a minimally invasive fashion have been reported. The following article, after a detailed review of the currently available literature, overviews MIS in dorsal cervical instrumentation and past, present and future techniques, and it discusses the current limitations. Nevertheless, and because of the multiple advantages of MIS instrumentation, a lot of work remains to be carried out to fully establish MIS procedures for posterior cervical instrumentation.

Motion Magnification Applications for the Protection of Italian Cultural Heritage Assets

In recent years, the ENEA has introduced a novel methodology based on motion magnification (MM) into the Italian cultural heritage protection and monitoring field. It consists of a digital video signal processing technique able to amplify enormously the tiny movements recorded in conventional videos, while preserving the general topology of the acquired frames. Though the idea of such a methodology is not new, it has recently been provided with an efficient algorithm that makes possible a viable and low-cost magnification. Applications are extremely varied in almost every field of science and technology; however, we are interested in its application to the safeguarding of architectural heritage, a sector of the utmost importance for Italy. As ancient buildings can be extremely sensitive to even minimally invasive instrumentation, most common monitoring sensors can be replaced by contactless tools and methods, such as video-based techniques like MM. It offers many advantages: easy to use, contactless devices, virtual sensors, reusability of the videos, practicality, intuitive graphical results, quantitative analyses capability and low costs. These characteristics are well suited to the monitoring of large ancient monuments; on the other hand, historical sites have peculiarities of their own, requiring careful approaches, proper tools and trained personnel. Moreover, outdoor applications of MM present quite notable difficulties from a practical point of view, e.g., the dimensions of the studied objects, uncontrolled environmental conditions, spurious vibrations, lighting change/instability, etc. Here we give a general idea of the potential of MM and related issues, using some relevant in-the-field case studies in Italian heritage protection.

Minimally invasive lateral retroperitoneal transpsoas approach for lumbar corpectomy and fusion with posterior instrumentation.

In this video, the authors highlight the operative treatment of a 55-year-old man with chronic osteomyelitis discitis. The operation entailed a minimally invasive lateral retroperitoneal transpsoas approach for L3 and L4 corpectomies, L2–5 interbody fusion, and L2–5 minimally invasive posterior instrumentation. The operation proceeded in two stages, beginning in the lateral position with corpectomy of the L3 and L4 vertebral bodies and placement of a corpectomy cage. After closure of this access wound, the patient was turned to a prone position for the posterior element of the operation. Posterior instrumentation was placed with pedicle screws at L2 and L5.The video can be found here: https://stream.cadmore.media/r10.3171/2022.3.FOCVID2210

Comparative Evaluation of Fracture Resistance of Endodontically Treated Bicuspids Instrumented With Hand Files, TruNatomy, ProTaper Next, ProTaper Gold, and WaveOne - An In vitro Study.

Aim:The study aims to compare and evaluate the fracture resistance of endodontically treated bicuspids instrumented with Hand Files, TruNatomy (TRN), ProTaper Next (PTN), ProTaper Gold (PTG), and WaveOne (WO).Materials and Methods:In total, 45 extracted single-rooted human premolar teeth were selected and sectioned at or below the cementoenamel junction to obtain roots 15 mm long. The samples were divided into four experimental groups and one control group (n = 9): instrumentation with nickel–titanium (NiTi) Hand Files (control group), instrumentation with TRN files, instrumentation with PTN files, instrumentation with PTG files, and instrumentation with WO files. The samples were obturated by lateral compaction technique using gutta-percha points and AH Plus sealer. A vertical load was applied to the tooth using the universal testing machine (Tecsol-TSI-BDS-2Kn-Sr No. 170710) for the fracture resistance test. Statistical analysis was performed.Results:The study reported that teeth instrumented with NiTi hand files exhibited the highest fracture resistance when compared to all the rotary and reciprocating file systems. Among rotary and reciprocating instruments, root prepared with TRN files showed the most significant resistance to fracture compared with PTN, PTG, and WO files.Conclusion:Within the limitations of this study, it can be concluded that minimally invasive instrumentation of the system preserves more pericervical dentin, which may increase the resistance to fracture. Results of this study and other studies support the use of minimally tapered instruments to improve the fracture resistance of endodontically treated teeth.

Accuracy Assessment of Percutaneous Pedicle Screw Placement Using Cone Beam Computed Tomography with Metal Artifact Reduction.

Metal artifact reduction (MAR) algorithms are used with cone beam computed tomography (CBCT) during augmented reality surgical navigation for minimally invasive pedicle screw instrumentation. The aim of this study was to assess intra- and inter-observer reliability of pedicle screw placement and to compare the perception of baseline image quality (NoMAR) with optimized image quality (MAR). CBCT images of 24 patients operated on for degenerative spondylolisthesis using minimally invasive lumbar fusion were analyzed retrospectively. Images were treated using NoMAR and MAR by an engineer, thus creating 48 randomized files, which were then independently analyzed by 3 spine surgeons and 3 radiologists. The Gertzbein and Robins classification was used for screw accuracy rating, and an image quality scale rated the clarity of pedicle screw and bony landmark depiction. Intra-class correlation coefficients (ICC) were calculated. NoMAR and MAR led to similarly good intra-observer (ICC > 0.6) and excellent inter-observer (ICC > 0.8) assessment reliability of pedicle screw placement accuracy. The image quality scale showed more variability in individual image perception between spine surgeons and radiologists (ICC range 0.51–0.91). This study indicates that intraoperative screw positioning can be reliably assessed on CBCT for augmented reality surgical navigation when using optimized image quality. Subjective image quality was rated slightly superior for MAR compared to NoMAR.

A case report of robotic-guided prone transpsoas lumbar fusion in a patient with lumbar pseudarthrosis, adjacent segment disease, and degenerative scoliosis.

BackgroundSurgical treatment of scoliosis includes long and invasive multi-level instrumentation and correction which may result in high rates of postoperative complications, especially in elderly patients with osteopenia or multiple comorbidities. Minimally invasive surgical options may benefit these patients.Case descriptionA 73-year-old female patient with a history of degenerative lumbar scoliosis, L4–5 pseudarthrosis, and resulting L5-S1 adjacent segment following prior unsuccessful lateral L4–5 interbody fusion presented to the clinic with severe lower back pain and lower extremity radiculopathy. The decision was made to proceed with surgical correction via a robotic-guided prone transpsoas (PTP) approach, which is a novel approach similar to lateral lumbar interbody fusion (LLIF) with the patient in a prone decubitus position. Excellent spinal alignment was achieved with no complications. On two-month follow-up, imaging revealed pedicle screws at the L3, L4, L5 levels and at the sacrum without change and continued interbody cages position with no signs or symptoms of infection.DiscussionMinimally invasive procedures have demonstrated benefit in spine surgery especially for at risk populations. The LLIF procedure has been well established for use in a wide range of spinal pathologies given its noted benefits in increasing spinal column stability through posterior fixation and indirect decompression. However, only marginal improvements in segmental lordosis are expected and there are reports of neurological complications. The PTP procedure has emerged as an alternative to LLIF for the treatment of spinopelvic pathologies. This approach enables greater improvements to spinal lordosis through single-position surgery while simultaneously reducing intraoperative repositioning and providing the known benefits of lateral interbody surgery.ConclusionOur experience suggests that the PTP approach is safe and effective because it does not require patient repositioning, easily interfaces with robotic guidance, and achieves increased lordosis gains via the prone positional effect compared to LLIF and comparable approaches.

Innovations in Spinal Endoscopy

Innovations in spinal endoscopy technology and technique have broadened their applications during the past 10 years. Smaller outer-diameter working-channel endoscopes have permitted safe usage in the cervical spine for full endoscopic decompressions. Endoscopic fusions have now been widely reported, leveraging compatible instrumentation for disc preparation and expandable interbody grafts. This ultra-minimally invasive technique has also enabled the performance of fusion procedures in awake patients under monitored anesthesia care, affording speedier recovery and treatment options for those unable to undergo general anesthesia. Revision surgery after open or minimally invasive posterior discectomy or instrumentation can now be performed with endoscopic techniques, which often leverage the transforaminal approach to avoid scar tissue and adhesions. These procedures, among other endoscopic surgeries, are now being increasingly performed in ambulatory surgery centers, as safe outcomes, economic benefits to the healthcare system, and patients' desire to recover at home are becoming more apparent. Finally, the standardization of endoscopic terminology, which has long been a confounder to proper communication and education in this field, has recently been addressed by leading experts in a consensus document, which will serve as the foundation for future collaborative advancements.

Comparison of GentleWave system and passive ultrasonic irrigation with minimally invasive and conventional instrumentation against LPS in infected root canals

This study compared the effectiveness of GentleWave system (GWS) and passive ultrasonic irrigation (PUI) in removing lipopolysaccharides (LPS) from infected root canals after minimally invasive (MIT) and conventional instrumentation (CIT) techniques. Sixty first premolars with two roots were inoculated with fluorescent LPS conjugate (Alexa Fluor 594). Of those, twelve were dentin pretreated, inoculated with fluorescent LPS conjugate, and submitted to confocal laser scanning microscopy (CLSM) to validate the LPS-infection model. Forty-eight teeth were randomly divided into treatment groups: GWS + MIT, GWS + CIT, PUI + MIT, and PUI + CIT (all, n = 12). Teeth were instrumented with Vortex Blue rotary file size 15/0.04 for MIT and 35/0.04 for CIT. Samples were collected before (s1) and after a root canal procedure (s2) and after cryogenically ground the teeth (s3) for intraradicular LPS analysis. LPS were quantified with LAL assay (KQCL test). GWS + MIT and GWS + CIT were the most effective protocols against LPS, with no difference between them (p > 0.05). PUI + CIT was more effective than PUI + MIT (p < 0.05) but less effective than GWS + MIT and GWS + CIT. GWS was the most effective protocol against LPS in infected root canals using MIT and CIT techniques.

Efficacy of GentleWave System and Passive Ultrasonic Irrigation with Minimally Invasive and Conventional Instrumentation Technique against Enterococcus faecalis Lipoteichoic Acid in Infected Root Canals

IntroductionThis study evaluated the effectiveness of the GentleWave System (GWS; Sonendo, Laguna Hills, CA) and passive ultrasonic irrigation (PUI) in removing Enterococcus faecalis lipoteichoic acid (LTA) from infected root canals with a minimally invasive technique (MIT) and the conventional instrumentation technique (CIT). MethodsSixty extracted human maxillary first premolars were included. All teeth were dentin pretreated and inoculated with LTA prepared from E. faecalis. First, 12 teeth were cryogenically ground to investigate the viability of recovering intraradicular E. faecalis LTA. Afterward, 48 teeth were randomly divided into the following groups: GWS + MIT, GWS + CIT, PUI + MIT, and GWS + CIT (all n = 12). Teeth were instrumented with a Vortex Blue (Dentsply Sirona, Ballaigues, Switzerland) rotary file size 15/.04 for MIT and 35/.04 for CIT. Samples were collected before and after a root canal procedure with sterile/apyrogenic paper points and after cryogenically ground for intraradicular LTA analysis. LTA was quantified with an LTA enzyme-linked immunosorbent assay kit. ResultsE. faecalis LTA was recovered from 100% of the samples (48/48) before the root canal procedure. GWS + MIT and GWS + CIT were the most effective protocols against E. faecalis LTA, with no difference between them (P > .05). PUI + CIT was more effective than PUI + MIT (P < .05) but less effective than GWS + MIT and GWS + CIT (P < .05). The GWS groups showed more root canals with undetected E. faecalis LTA after treatment than all groups tested. ConclusionsGWS + MIT and GWS + CIT were the most effective protocols against E. faecalis LTA in infected root canals.

Anterior column reconstruction of the lumbar spine in the lateral decubitus position: anatomical and patient-related considerations for ALIF, anterior-to-psoas, and transpsoas LLIF approaches.

Circumferential (AP) lumbar fusion surgery is an effective treatment for degenerative and deformity conditions of the spine. The lateral decubitus position allows for simultaneous access to the anterior and posterior aspects of the spine, enabling instrumentation of both columns without the need for patient repositioning. This paper seeks to outline the anatomical and patient-related considerations in anterior column reconstruction of the lumbar spine from L1-S1 in the lateral decubitus position. We detail the anatomic considerations of the lateral ALIF, transpsoas, and anterior-to-psoas surgical approaches from surgeon experience and comprehensive literature review. Single-position AP surgery allows simultaneous access to the anterior and posterior column and may combine ALIF, LLIF, and minimally invasive posterior instrumentation techniques from L1-S1 without patient repositioning. Careful history, physical examination, and imaging review optimize safety and efficacy of lateral ALIF or LLIF surgery. An excellent understanding of patient spinal and abdominal anatomy is necessary. Each approach has relative advantages and disadvantages according to the disc level, skeletal, vascular, and psoas anatomy. A development of a framework to analyze these factors will result in improved patient outcomes and a reduction in complications for lateral ALIF, transpsoas, and anterior-to-psoas surgeries.

Airway management for one lung ventilation during COVID-19 pandemic: a survey within Italian anesthesiologists

BackgroundAirway management for thoracic surgery represents a high risk setting for SARS-CoV-2 infection diffusion due to complex and invasive airway instrumentation and techniques.ResultsAn 18-item questionnaire was submitted to the 56 members of the Thoracic subcommittee of the SIAARTI Cardio-Thoraco-Vascular Research Group to provide a snapshot of current situation and national variability of devices and procedures for airway management during the COVID-19 pandemic. The response rate was 64%. Eighty-three percent of anesthetists declared that they modified their airway management strategies. The Hospital Management considered necessary to provide a complete level 3 personal protective equipment for thoracic anesthetists only in 47% of cases. Double-lumen tube and bronchial blocker were preferred by 53% and 22% of responders to achieve one-lung ventilation respectively. Over 90% of responders considered the videolaryngoscope with separate screen and rapid sequence induction/intubation useful to minimize the infection risk. Thirty-nine percent of participants considered mandatory the bronchoscopic check of airway devices. Vivasight-DL was considered comfortable by more than 50% of responders while protective box and plastic drape were judged as uncomfortable by most of anesthetists.ConclusionsThe survey reveals many changes in the clinical practice due to SARS-CoV-2 outbreak. A certain diffusion of new devices such as the VivaSight-DL and barrier enclosure systems emerged too. Finally, we found that most of Italian hospitals did not recognize thoracic anesthesia as a high-risk specialty for risk of virus diffusion.

Variability Index of Optic Nerve Diameter with Hyperosmolar Therapy in Patients with Acute Neurological Injury

Introduction: Intracranial hypertension (IH) is a serious complication derived from increased pressure of brain content. It has been shown that dilation of the optic nerve sheath is a manifestation prior to the elevation of intracranial pressure (ICP) since it is a central nervous system continuum. Acute neurological injury (ANI) is a serious disease with a high risk of mortality and sequelae with non-specific clinical signs. ICP monitoring requires invasive instrumentation; however, now there is non-invasive monitoring by transorbital ocular ultrasonography, which measures the optic nerve sheath diameter (ONSD). Therefore, we propose a new variability index of the optic nerve sheath diameter (VIONSD) that allows determining the response to hyperosmolar therapy treatment as it is an alternative neuromonitoring method.