Introduction Of Different Groups Research Articles

Design and Synthesis of Novel Phenylahistin Derivatives Based on Co-Crystal Structures as Potent Microtubule Inhibitors for Anti-Cancer Therapy.

Phenylahistin is a naturally occurring marine product with a diketopiperazine structure that can bind to the colchicine site of microtubulin as a possible anticancer agent. To develop more potent microtubule inhibitors, novel phenylahistin derivatives were designed and synthesized based on the co-crystal complexes of phenylahistin derivatives and microtubulin. We established a focused library of imidazole-type molecules for the introduction of different groups to the C-ring and A-ring of phenylahistin. Structure-activity relationship studies indicated that appropriate hydrocarbon substituents and unsaturated alkenyl substituents at the 1-position of the imidazole group are important for improving the activity of such compounds. In addition, this study found that propylamine groups could maintain the activity of these compounds, as exemplified by compound 16d (IC50 = 5.38 nM, NCI-H460). Compound 15p (IC50 = 1.03 nM, NCI-H460) with an allyl group exhibited potent cytotoxic activity at the nanomolar level against human lung cancer cell lines. Immunofluorescence assay indicated that compound 15p could efficiently inhibited microtubule polymerization and induced a high expression of caspase-3. 15p also displayed good pharmacokinetic characteristics in vitro. Additionally, the growth of H22 transplanted tumors was significantly inhibited in BALB/c mice when 15p alone was administered at 4 mg/kg, and the tumor inhibition rate was as much as 65%. Importantly, the continuous administration of 15p resulted in a lower toxicity than that of docetaxel (10 mg/kg) and cyclophosphamide (20 mg/kg). Overall, the novel allyl-imidazole-diketopiperazine-type derivatives could be considered safe and effective potential agents for cancer treatment.

Outcomes of Treatment and Predictors of Response to Sofosbuvir Plus Simeprevir in Hepatitis C Virus with Genotype-4 Infection.

Treatment plan of chronic HCV infection has dramatically improved after the introduction of different groups of Direct-Acting Antiviral (DAA) drugs. These drugs have been found to be safe and effective. Sofosbuvir (SOF) plus simeprevir (SMV) regimen has been shown to be tolerable and effective in treatment of patients with HCV genotype 1. The aim of the study was to evaluate the safety and the efficacy of combined sofosbuvir plus simeprevir treatment in genotype 4 chronic HCV patients. This open-label multicenter prospective study was carried out on 381 Egyptian patients with chronic hepatitis C virus- infection. Treatment experienced and treatment-naive patients were included. Subjects administrated a regimen of sofosbuvir (400 mg/ day) plus semiprevir (150 mg /day) for twelve weeks. Sustained Virological Response (SVR) was confirmed by undetectable HCV RNA by quantitative PCR 3 months after the end of the treatment. 97.6% (372 /381) of patients had SVR. None of the studied clinical and demographic characteristics were associated with the SVR status. However, patients who failed to achieve SVR showed low albumin level and high total leucocyte. The most common side effects of the studied regimen were headache, fatigue, itching, photosensitivity, and cough. Twelve weeks' regimen of sofosbuvir plus simeprevir was considered to be safe and tolerable in the treatment of HCV genotype 4; also it was associated with high SVR (97.6%).

Structure-based design and synthesis of novel furan-diketopiperazine-type derivatives as potent microtubule inhibitors for treating cancer

Plinabulin, a synthetic analog of the marine natural product “diketopiperazine phenylahistin,” displayed depolymerization effects on microtubules and targeted the colchicine site, which has been moved into phase III clinical trials for the treatment of non-small cell lung cancer (NSCLC) and the prevention of chemotherapy-induced neutropenia (CIN). To develop more potent anti-microtubule and cytotoxic derivatives, the co-crystal complexes of plinabulin derivatives were summarized and analyzed. We performed further modifications of the tert-butyl moiety or C-ring of imidazole-type derivatives to build a library of molecules through the introduction of different groups for novel skeletons. Our structure–activity relationship study indicated that compounds 17o (IC50 = 14.0 nM, NCI-H460) and 17p (IC50 = 2.9 nM, NCI-H460) with furan groups exhibited potent cytotoxic activities at the nanomolar level against various human cancer cell lines. In particular, the 5-methyl or methoxymethyl substituent of furan group could replace the alkyl group of imidazole at the 5-position to maintain cytotoxic activity, contradicting previous reports that the tert-butyl moiety at the 5-position of imidazole was essential for the activity of such compounds. Immunofluorescence assay indicated that compounds 17o and 17p could efficiently inhibit microtubule polymerization. Overall, the novel furan-diketopiperazine-type derivatives could be considered as a potential scaffold for the development of anti-cancer drugs.

Ecological and Physiological Assessment of Animal Anesthesia Methods

The use of pharmaceuticals is indispensable in everyday medical practice. The patient’s life sometimes depends on the right dosages and the chosen method of administration of the drug, therefore, for the successful provision of assistance to the animal, the specialist should become familiar with pharmacokinetics and pharmacodynamics of the drugs used to prevent undesirable side effects and to reduce the risk of adverse outcome of the disease. Currently, many veterinary enterprises have been opened in Russia, a considerable number of them are private veterinary clinics, where daily surgical interventions with the use of anesthetics are carried out. Depending on the equipment they use different methods of anesthesia of animals – inhalation, non-inhalation or a combined method. The article deals with pharmacokinetic factors in the field of veterinary anesthesiology, its peculiarities associated with different methods of introduction of different groups of anesthetics, which have a similar effect on the body when injected into anesthesia. Moreover, depending on the method of introduction, their absorption into the body varies, the depth of anesthesia changes and the time of exit from it is different.

SELECTION OF A FILLER FOR TABLETS MANUFACTURED WITH DIRECT COMPRESSION METHOD CONTAINING DRY GINGER EXTRACT

The preliminary studies of physico-chemical and pharmaco-technological properties of the dry extract of ginger have determined the need for introduction of different groups of excipients for developing a solid dosage form for the treatment of type II diabetes mellitus. Aim. To choose the rational filler in the composition of tablets with ginger obtained by direct compression. Materials and methods. The study object was the dry extract of ginger (DEG) (producer “Megaprom”, Dnepr,Ukraine) and modern excipients for the production of tablets by direct compression: GalenIQ 721 (BENEO-Palatinit Gmb), Flowlac 100 (Meggle Co.), Tablettose 80 (Meggle Co.), Farmaxx (Merck), Microcelac 100 (Meggle Co.), Vivapur 112 and 102 (JRS Pharm), Prosolv HD 90, Prosolv SMCC 50 (JRS Pharm) manufactured in Germany. Pharmaco-technological and physico-chemical properties of the samples were studied according to conventional methods of the State Pharmacopoeia of Ukraine. Results and discussion. According to the results of the crystallographic analysis, the ability to the moisture absorption, resistance to crushing, disintegration time, fluidity indicators, angle of repose and bulk volume the effect of modern excipients on physicochemical and pharmaco-technological properties of the dry extract of ginger has been studied. Conclusions. According to the results of microscopic analysis, it has been found, that the rational fillers are GalenIQ 721, Prosolv HD 90, Prosolv SMCC 50, Vivapur 102 and Vivapur 112, as they provide a uniform system and the necessary resistance to destruction. The study of the kinetics of the moisture absorption has shown that addition of the fillers significantly reduces the increase in moisture compared to the dry extract. The mixture with GalenIQ 721 has the lowest parameters of moisture absorption at a relative air humidity of 45 %, 75 % and 100 %. In accordance with the results of the pharmaco-technological studies, it has been found that addition of GalenIQ 721 leads to improved flowability, disintegration, settling qualities; it indicates the feasibility of its inclusion into the composition of the solid dosage form.

Rational Design of Low-Band Gap Star-Shaped Molecules With 2,4,6-Triphenyl-1,3,5-triazine as Core and Diketopyrrolopyrrole Derivatives as Arms for Organic Solar Cells Applications.

A series of D–A novel star-shaped molecules with 2,4,6-triphenyl-1,3,5-triazine (TPTA) as core, diketopyrrolo[3,4-c]pyrrole (DPP) derivatives as arms, and triphenylamine (TPA) derivatives as end groups have been systematically investigated for organic solar cells (OSCs) applications. The electronic, optical, and charge transport properties were studied using density functional theory (DFT) and time-dependent DFT (TD-DFT) approaches. The parameters such as energetic driving force ΔEL−L, adiabatic ionization potential AIP, and adiabatic electron affinity AEA were also calculated at the same level. The calculated results show that the introduction of different groups to the side of DPP backbones in the star-shaped molecules can tune the frontier molecular orbitals (FMOs) energy of the designed molecules. The designed molecules can provide match well with those of typical acceptors PCBM ([6,6]-phenyl-C61-butyric acid methyl ester) and PC71BM ([6,6]-phenyl-C71-butyric acid methyl ester). Additionally, the absorption wavelengths of the designed molecules show bathochromic shifts compared with that of the original molecule, respectively. The introduction of different groups can extend the absorption spectrum toward longer wavelengths, which is beneficial to harvest more sunlight. The calculated reorganization energies suggest that the designed molecules are expected to be the promising candidates for ambipolar charge transport materials except molecule with benzo[c]isothiazole group can be used as hole and electron transport material. Moreover, the different substituent groups do not significantly affect the stability of the designed molecules.

Theoretical characterisation and design of D–π–A star-shaped molecules with triphenylamine as core and diketopyrrolopyrroles as arms for organic solar cells

ABSTRACTA series of novel D–π–A star-shaped molecules with triphenylamine (TPA) fragments as cores, diketopyrrolopyrrole (DPP) fragments as arms, and different conjugate π-bridges those connect TPA and DPP fragments have been designed for small molecules based organic solar cells (OSCs) applications. The optical, electronic, and charge transporting properties have been systematically investigated by means of density functional theory (DFT) and time-dependent DFT (TD-DFT) methods. The parameters such as energetic driving force ΔEL-L, adiabatic ionisation potentials (AIP), and adiabatic electron affinities (AEA) were also calculated at the same level to preliminarily evaluate the performance of the OSCs. The results of frontier molecular orbitals (FMOs) show that the designed molecules provide the best match matched energy levels with typical acceptors PCBM, bisPCBM, and PC70BM except for molecule containing benzo[c][1,2,5]thiadiazole unit because of its low energetic driving force ΔEL-L. It turned out that the FMO energy levels, the band gaps, AIP, AEA, and absorption spectrum can be tuned effectively by the introduction of different groups. Additionally, our results suggest that the designed molecules can act as promising candidates for donor materials and ambipolar charge transport materials for OSCs.

Preparation, Antidermatophyte Activity, and Mechanism of Methylphloroglucinol Derivatives.

In this study a variety of phloroglucinols were isolated from the plant, and the activity experiment showed that the phloroglucinols had strong antifungal activity, especially methylphloroglucinol derivatives such as aspidin PB, dryofragin, aspidinol, aspidin BB, aspidin AB, and albicanol, in which the hydroxyl group of methylphloroglucinol is the active group of compounds, and C-2 or C-6 is the active site. The introduction of different groups in this position could change the properties and bioactivity of the compounds. In this study, different functional groups were introduced to the structure of methylphloroglucinol to obtain methylphloroglucinol derivatives that were synthesized, and antidermatophyte activities on Trichophyton rubrum, Trichophyton mentagrophytes, Microsporum canis, and Gypsum microspore bacteria were evaluated. Molecular docking verified its ability to combine the protein binding site. The antidermatophyte mechanism of compounds on cytochrome P450 sterol 14a-demethylase, squalene epoxidase, and β-1,3-glucan synthase was investigated by the enzyme-linked immunosorbent assay. The results showed that compounds had an inhibitory effect on four kinds of common dermatophytes in varying degrees, in which compound g had the strongest activities, the binding mode of methylphloroglucinol and its derivatives were similar to those of three enzymes, and compounds e and g had significant effects on the activity of the three enzymes, and compound g had a slightly stronger effect than the blank group. Compounds e and g also had a significant effect on the ergosterol synthesis of M. canis. This study could supply some antidermatophyte leading structure and possible mechanism for studying and developing new antifungal agents.

The orthopalladation dinuclear [Pd(L 1)(μ-OAc)] 2, [Pd(L 2)(μ-OAc)] 2 and mononuclear [Pd(L 3) 2] complexes with [N, C, O] or [N, O] containing ligands: Synthesis, spectral characterization, electrochemistry and catalytic properties

Treatment of the salicylaldimine ligands (L 1H, L 2H, L 3H, L 4H and L 5H) with palladium(II) acetate in absolute ethanol gave the orthopalladation dinuclear [Pd(L 1)(μ-OAc)] 2, [Pd(L 2)(μ-OAc)] 2 and mononuclear [Pd(L 3) 2] with the tetradentate ligands [N, C, O] or [N, O] moiety. The ligands L 1H and L 2H are coordinated through the imine nitrogen and aromatic ortho carbon atoms, whereas the ligand L 3H coordinated through the imine nitrogen and phenolic oxygens atoms. The Pd(II) complexes have a square-planar structure and were found to be effective catalysts for the hydrogenation of both nitrobenzene and cyclohexene. These metal complexes were also tested as catalysts in Suzuki–Miyaura coupling of aryl bromide in the presence of K 2CO 3. The catalytic studies showed that the introduction of different groups on the salicyl ring of the molecules effected the catalytic activity towards hydrogenation of nitrobenzene and cyclohexene in DMF at 25 and 45 °C. The Pd(II) complexes easily prepared from cheap materials could be used as versatile and efficient catalysts for different C–C coupling reactions (Suzuki–Miyaura reactions). The structure of ligands and their complexes was characterized by UV–Vis, FT-IR, 1H and 13C NMR, elemental analysis, molar conductivity, as well as by electrochemical techniques.

Perylenes as sensitizers in hybrid solar cells: how molecular size influences performance

Dye-sensitized solar cells (DSCs), one kind of hybrid solar cells, are being intensively developed due to their high efficiency and low cost. One of the main factors to improve the efficiency is the minimization of the recombination of holes and electrons at the TiO2/dye/electrolyte interface. To suppress the charge recombination, dye arrangement on the TiO2 surface plays the pivotal role in DSCs. Herein we report three perylene sensitizers of various molecular sizes, which are derived from the introduction of different groups in the 1,6-positions of the perylene core. The same donor (di-p-tert-octylphenylamino) and acceptor (anhydride) moieties in these perylene sensitizers render them highly similar spectroscopic and electrochemical properties, which can be used to compare the effect of the dye-loading on the TiO2 surface, namely, the photovoltaic performance as a function of the sensitizer size. These results will help in better understanding the complex relationship between the molecular size and the device performance.

Introduction of Different Groups to α- and β-Positions of Cyclic α,β-Unsaturated Ketones via [2π + 2π] Photocycloaddition with Ketene Silyl Acetals Followed by Electrode Reaction

Abstract The photoadducts of cyclic conjugated enones with ketene silyl acetals and silyl enol ether were subjected to electrolysis to bring about the oxidative cleavage of the Si-O bond, which induced the collapse of the cyclobutane ring to perform the introduction of the different groups to both positions of the ene moieties of the enones.

Studies on polyesters modified rosin

Considerable effort has been made by this Laboratory and industry to make polyfunctional derivatives of rosin through the introduction of different groups into the resin acid moiety.

The absorption spectra of some naphthalene derivatives in vapour and solution

Having examined the absorption spectra of naphthalene and its methyl derivatives, I have continued the investigation in order to see how the spectrum of naphthalene is affected by the introduction of different groups in the alpha and beta positions. The technique employed for the solution and vapour spectra has been fully described elsewhere. Pure hexane§ was used as a solvent unless otherwise stated, ϵ is the molecular absorption coefficient. The substances were purified by crystallisation from hexane. Liquids were fractionally distilled in vacuo .