Intramolecular Photoinduced Electron Transfer Research Articles

Rapid sequential detection of Al3+ and glyphosate using an “Off-On-Off” fluorescent probe based on salicylate modified layered double hydroxides

A fluorescent probe based on salicylate modified layered double hydroxide (LDH-SA) is presented, enabling the swift sequential detection of Al3+, fosetyl-Al and glyphosate in aqueous environment. The probe was synthesized using a simple co-precipitation procedure, and its properties and synthesis conditions were thoroughly characterized and optimized. A unique “off-on-off” fluorescent response was observed when the probe sequentially interacted with Al3+ and glyphosate, and the detection method based on this phenomenon was established. The limits of detection for Al3+ and glyphosate were determined as 0.03 μmol/L and 0.03 mg/L, respectively, with rapid detection periods of one minute and four minutes. The LDH-SA/Al3+ complex requires Al3+ to generate a chelation-gathered fluorescence effect, which is the mechanism by which it quenches LDH-SA. This is possible due to the inhibition of excited-state intramolecular proton transfer and photoinduced electron transfer processes within LDH-SA after incorporating Al3+. Upon interaction with glyphosate, competitive complexation between glyphosate and Al3+ is initiated, which leads to a recovery of the fluorescence spectrum of LDH-SA and demonstrating the “off-on-off” behavior. An “INHIBIT” logic gate system was devised utilizing the response, indicating potential applications in fluorescence-based devices. Such a rapid, sequential detection capacity is impressive. It attests to the utility of LDH-SA as a probe for Al3+ or glyphosate, and suggests promise for applications in pollutant analysis or environmental monitoring applications.

Collaboration strategy-based fluorescence sensor for efficient detecting Al3+ and Hg2+

Developing economical sensors and methods to efficiently detect metal ions like Hg2+ and Al3+ is still significant. Hg2+ is notorious for its strong neurotoxicity, while, Al3+ is a risk factor for Alzheimer's disease (AD) in humans. To improve the selectivity and sensitivity of Hg2+ and Al3+, in this research, the collaboration effect has been successfully applied to the design of chemosensors to enhance the detecting ability of the sensor. According to this strategy, quinoline-8-yloxy acetohydrazone and hydroxy‑naphthyl groups have been rationally introduced into one sensor molecule, based on the collaboration of these functional groups, the obtained chemosensor (QN) shows efficient “off-on-off” response for Al3+ and Hg2+. QN can ultra-sensitively detect Al3+ with fluorescent “turn-on” response, the limit of detection (LOD) of QN towards Al3+ is 4.34×10-9 M. Interestingly, after coordination with Al3+, the obtained complex QN-Al can detect Hg2+ sensitively, the LOD of QN towards Hg2+ is 5.70×10-8 M. The Al3+ and Hg2+ sensing process shows nice selectivity, and the detecting procedure cannot be interfered with by other common metal cations. The possible recognition mechanism of QN for Al3+ and Hg2+ was carefully investigated via experimental and theoretical studies. According to these studies, the selective and sensitive sensing of Al3+ and Hg2+ is based on the collaborative coordination of quinoline acetohydrazone and hydroxy‑naphthyl groups. The relay sensing procedure of Al3+ and Hg2+ is attributed to the competitive coordination of these two cations. The fluorescent response of Al3+ might be attributed to excited state intra-molecular proton transfer (ESIPT) and photoinduced electron transfer (PET), meanwhile, the Hg2+ response mechanism may be ascribed to the chelation enhancement quenching effect (CHEQ). Moreover, the detection of real samples is conducted to determine the aluminum content in food to prove that chemosensor QN is suitable for the detection of Al3+ from food samples, and the QN-based test kits for convenient detection of Al3+ and Hg2+ were also successfully prepared.

Anion Sensing through Redox‐Modulated Fluorescent Halogen Bonding and Hydrogen Bonding Hosts**

AbstractAnion sensing via either optical or electrochemical readouts has separately received enormous attention, however, a judicious combination of the advantages of both modalities remains unexplored. Toward this goal, we herein disclose a series of novel, redox‐active, fluorescent, halogen bonding (XB) and hydrogen bonding (HB) BODIPY‐based anion sensors, wherein the introduction of a ferrocene motif induces remarkable changes in the fluorescence response. Extensive fluorescence anion titration, lifetime and electrochemical studies reveal anion binding‐induced emission modulation through intramolecular photoinduced electron transfer (PET), the magnitude of which is dependent on the nature of both the XB/HB donor and anion. Impressively, the XB sensor outperformed its HB congener in terms of anion binding strength and fluorescence switching magnitude, displaying significant fluorescence turn‐OFF upon anion binding. In contrast, redox‐inactive control receptors display a turn‐ON response, highlighting the pronounced impact of the introduction of the redox‐active ferrocene on the optical sensing performance. Additionally, the redox‐active ferrocene motif also serves as an electrochemical reporter group, enabling voltammetric anion sensing in competitive solvents. The combined advantages of both sensing modalities were further exploited in a novel, proof‐of‐principle, fluorescence spectroelectrochemical anion sensing approach, enabling simultaneous and sensitive read out of optical and electrochemical responses in multiple oxidation states and at very low receptor concentration.

Anion Sensing through Redox-Modulated Fluorescent Halogen Bonding and Hydrogen Bonding Hosts.

Anion sensing via either optical or electrochemical readouts has separately received enormous attention, however, a judicious combination of the advantages of both modalities remains unexplored. Toward this goal, we herein disclose a series of novel, redox-active, fluorescent, halogen bonding (XB) and hydrogen bonding (HB) BODIPY-based anion sensors, wherein the introduction of a ferrocene motif induces remarkable changes in the fluorescence response. Extensive fluorescence anion titration, lifetime and electrochemical studies reveal anion binding-induced emission modulation through intramolecular photoinduced electron transfer (PET), the magnitude of which is dependent on the nature of both the XB/HB donor and anion. Impressively, the XB sensor outperformed its HB congener in terms of anion binding strength and fluorescence switching magnitude, displaying significant fluorescence turn-OFF upon anion binding. In contrast, redox-inactive control receptors display a turn-ON response, highlighting the pronounced impact of the introduction of the redox-active ferrocene on the optical sensing performance. Additionally, the redox-active ferrocene motif also serves as an electrochemical reporter group, enabling voltammetric anion sensing in competitive solvents. The combined advantages of both sensing modalities were further exploited in a novel, proof-of-principle, fluorescence spectroelectrochemical anion sensing approach, enabling simultaneous and sensitive read out of optical and electrochemical responses in multiple oxidation states and at very low receptor concentration.

A benzoxazole-triphenylamine conjugated fluorogenic probe for specific detection of sarin gas mimic diethylchlorophosphate.

In this study, an excellent chromo-fluorogenic PMPA probe, (E)-4-(((4-(benzoxazole-2-yl)phenyl)imino)methyl)-N,N-diphenylamine, is introduced for the detection of sarin gas mimic diethyl chlorophosphate (DCP) in solution and gaseous phases. On adding DCP into PMPA solution in a pure DMSO and water-DMSO (4 : 1) medium, it exhibits a hypsochromic shift from yellow to colorless and from no fluorescence to highly intense blue-violet photoluminescence via the formation of a phosphorylated PMPA-DCP product due to the inhibition of intramolecular charge transfer (ICT) and photoinduced electron transfer (PET) mechanism. The sensor could detect DCP in the presence of several other notorious guest analytes with a detection limit in the μM range. Moreover, to accomplish the on-spot detection of DCP and explore the practical applicability of the probe, a paper strip-based test kit, "dip-stick" method, and, more interestingly, a real sample analysis was demonstrated in spiked soil samples.

A Benzil- and BODIPY-Based Turn-On Fluorescent Probe for Detection of Hydrogen Peroxide.

Faced with rising threats of terrorism, environmental and health risks, achieving sensitive and selective detection of peroxide-based explosives (PEs) has become a global focus. In this study, a turn-on fluorescent probe (BOD) based on benzil (H2O2-recognition element) and 4,4-difluoro-4-bora-3a,4a-diaza-s-indacene (BODIPY) derivative (fluorophore) was developed to sensitively and specifically detect hydrogen peroxide (H2O2). The synthesized BOD had a very weak fluorescence due to intramolecular donor-excited photo-induced electron transfer (d-PET) effect; however, it could emit a strong fluorescence since H2O2 selectively oxidized the benzil moiety and released free BODIPY fluorophore (BOD-COOH). As a result, the proposed BOD detected H2O2 in linear detection ranged from 25 to 125 µM with a detection limit of 4.41 µM. Meanwhile, the proposed BOD showed good selectivity toward H2O2, which is not affected by other common reactive oxygen species (ROS) and ions from explosive residues. In addition, a blue shift from 508 to 498 nm was observed in the absorption spectra upon addition of H2O2. More importantly, the BOD was successfully applied for rapid detection of H2O2 vapor with good sensitivity (down to 7 ppb), which holds great potential for practical use in public safety, forensic analysis and environmental monitoring.

Aryl-Modified Pentamethyl Cyanine Dyes at the C2' Position: A Tunable Platform for Activatable Photosensitizers.

Pentamethyl cyanine dyes are promising fluorophores for fluorescence sensing and imaging. However, advanced biomedical applications require enhanced control of their excited-state properties. Herein, a synthetic approach for attaching aryl substituents at the C2' position of the thio-pentamethine cyanine (TCy5) dye structure is reported for the first time. C2'-aryl substitution enables the regulation of both the twisted intramolecular charge transfer (TICT) and photoinduced electron transfer (PET) mechanisms to be regulated in the excited state. Modulation of these mechanisms allows the design of a nitroreductase-activatable TCy5 fluorophore for hypoxic tumor photodynamic therapy and fluorescence imaging. These C2'-aryl TCy5 dyes provide a tunable platform for engineering cyanine dyes tailored to sophisticated biological applications, such as photodynamic therapy.

Improving fluorescence emission of cyproheptadine by hindering its intramolecular photoinduced electron transfer (PET): Application to content uniformity testing and human plasma

The ability to determine antihistaminic drugs in biological matrices is critical for the medication adherence assessment. Among these antihistaminic medications, cyproheptadine (CPD); that is acting as a potent first-generation antihistaminic drug that has been extensively prescribed for allergic patients. Most of the established approaches for CPD detection are not appropriate for this purpose owing to their weak sensitivity, lack of rapidity, and complicated experimental procedures. Herein, we present a very fast, highly sensitive, and reproducible approach for the detection of CPD in its pure form, tablet formulation, and spiked human plasma. The photoluminescence approach depends on hindering the intramolecular photoinduced electron transfer (PET) effect of the lone pair of the N-atom present on the piperidine ring of CPD by making the surrounding medium acidic using 1.0 M acetic acid. Based on blocking PET, the target CPD drug has been sensitively detected from 5.0 to 500 ng mL−1 with a very low detection and quantitation limit of 7.01 and 21.25 ng mL−1, respectively. Moreover, the established approach was used for checking the tablet content uniformity testing for each tablet and spiked human plasma, and noteworthy, the matrices interference was insignificant.

Exploring Various Photochemical Processes in Optical Sensing of Pesticides by Luminescent Nanomaterials: A Concise Discussion on Challenges and Recent Advancements.

Food safety is a burning global issue in this present era. The prevalence of harmful food additives and contaminants in everyday food is a significant cause for concern as they can adversely affect human health. More particularly, among the different food contaminants, the use of excessive pesticides in agricultural products is severely hazardous. So, the optical detection of residual pesticides is an effective strategy to counter the hazardous effect and ensure food safety. In this perspective, nanomaterials have played a leading role in defending the open threat against food safety instigated by the reckless use of pesticides. Now, nanomaterial-based optical detection of pesticides has reached full pace and needs an inclusive discussion. This Review covers the advancement of photoprocess-based optical detection of pesticides categorically using nanomaterials. Here, we have thoroughly dissected the photoprocesses (aggregation and aggregation-induced emission (AIE), charge transfer and intramolecular charge transfer (ICT), electron transfer and photoinduced electron transfer (PET), fluorescence resonance energy transfer (FRET), hydrogen bonding, and inner filter effect) and categorically demarcated their significant role in the optical detection of pesticides by luminescent nanomaterials over the last few years.

Time-resolved spectroscopic and computational study of the initial events in doxazosin photochemistry

Doxazosin is a quinazoline derivative widely used in medicine as a drug. In this study, a combined experimental and computational approach based on the time-dependent density functional theory was used to elucidate the primary events following the photoexcitation of DOX upon interaction with light. The photophysical properties and photochemical reactivity of DOX were investigated by steady-state and time-resolved absorption and fluorescence spectroscopy. DOX in H2O in S0 is present in two prototropic forms, with the protonated form dominating (∼91 %, pKa = 6.75). The computations indicated that the most basic quinazoline nitrogen is at the position 1. Upon excitation, DOX deprotonates in the singlet excited state (pKa* = 1.31), and the decay times from the singlet excited state of 5 ns and 13 ns are attributed to the non-protonated and protonated forms of DOX, respectively. The quantum yield of fluorescence in H2O is 0.51 and 0.64 in basic media. The quantum yield of intersystem crossing along with triplet–triplet molar absorption coefficient at 520 nm and the lifetime of the triplet excited state were obtained by LFP, ΦISC = 0.17, ε520 = 11600 ± 100 M−1 cm−1 and τ = 11 μs, respectively. Furthermore, LFP enabled detection of DOX radical formed by the photoinduced intramolecular electron transfer from the benzodioxane-carbamoyl to the protonated aminoquinazoline. Computations were used to back up the assignments of the detected transients and to construct an energy diagram with all plausible photophysical and photochemical pathways. These results elucidated the mechanisms of DOX photochemistry leading to DOX photodegradation which is relevant to environmental studies. They also provided insights into the potential use of such a quinazoline derivative in other applications such as push–pull chromophores or fluorescent probes.

Isomeric fluorescence sensors for wide range detection of ionizing radiations

In order to achieve a wider range of ionizing radiations detection, novel fluorescence sensing materials have been developed that utilize the fluorescence enhancement phenomenon caused by the intramolecular photoinduced electron transfer (PET) effect. Two perylene diimide isomers PDI-P and PDI-B were designed and synthesized, and their molecular structures were characterized by high-resolution Fourier transform mass spectrometry (HRMS), nuclear magnetic resonance hydrogen and carbon spectroscopy (1H and 13C NMR). The interaction between ionizing radiation and fluorescent molecules was simulated by HCl titration. The results show that combining PDIs and HCl can improve fluorescence through the retro-PET process. Despite the similarities in chemical structures, the fluorescent enhancement multiple of PDI-B with aromatic amine as electron donor is much higher than that of PDI-P with alkyl amine. In the direct irradiation experiments of ionizing radiation, the emission enhancement multiples of PDI-P and PDI-B are 2.01 and 45.4, respectively. Furthermore, density functional theory (DFT) and time-dependent density functional theory (TDDFT) calculations indicate that the HOMO and HOMO-1 energy ranges of PDI-P and PDI-B are 0.54 eV and 1.13 eV, respectively. A wider energy range has a stronger driving force on electrons, which is conducive to fluorescence quenching. Both femtosecond transient absorption spectroscopy (fs-TAS) and transient fluorescence spectroscopy (TFS) tests show that PDI-B has shorter charge separation lifetime and higher electron transfer rate constant. Although both isomers can significantly reduce LOD during PET process, PDI-B with aromatic amine has a wider detection range of 0.118–240 Gy due to its larger emission enhancement, which is a leap of three orders of magnitude. It breaks through the detection range of gamma radiation reported in existing studies, and provides theoretical support for the further study of sensitive and effective new materials for ionizing radiation detection.

A Smart Single-Fluorophore Polymer: Self-Assembly Shapechromic Multicolor Fluorescence and Erasable Ink.

A novel smart fluorescent polymer polyethyleneimine-grafted pyrene (PGP) is developed by incorporating four stimuli-triggers at molecular level. The triggers are amphiphilicity, supramolecular host-guest sites, pyrene fluorescence indicator, and reversible chelation sites. PGP exhibits smart deformation and shape-dependent fluorescence in response to external stimuli. It can deform into three typical shapes with a characteristic fluorescence color, namely, spherical core-shell micelles of cyan-green fluorescence, standard rectangular nanosheets of yellow fluorescence, and irregular branches of deep-blue fluorescence. A quasi-reversible deformation between the first two shapes can be dynamically manipulated. Moreover, driven by reversible coordination and the resulting intramolecular photoinduced electron transfer, PGP can be used as an aqueous fluorescence ink with erasable and recoverable properties. The fluorescent patterns printed by PGP ink on paper can be rapidly erased and recovered by simple spraying a sequence of Cu2+ and ethylene diamine tetraacetic acid aqueous solutions. This erase/recover transformation can be repeated multiple times on the same paper. The multiple stimulus responsiveness of PGP makes it have potential applications in nanorobots, sensing, information encryption, and anticounterfeiting.

Intramolecular Photoinduced Energy and Electron Transfer Reactions in Phenanthroimidazole-Boron Dipyromethane Donor-Acceptor Dyads.

Donor-acceptor systems in which a donor phenanthroimidazole (PhI) is directly connected to a BODIPY acceptor (Dyad1) and separated by an ethynyl bridge between PhI and BODIPY (Dyad2) have been designed, synthesized, and characterized by various spectroscopic and electrochemical techniques. Optical absorption and 1H NMR characteristics of both dyads with those of constituent individuals suggest that there exists a minimum π-π interaction between phenanthroimidazole and BODIPY. Quenched emission of both the dyads was observed when excited either at phenthaoimidazole absorption maxima or at BODIPY absorption maxima in all three investigated solvents. The detailed spectral analysis provided evidence for an intramolecular photoinduced excitation energy transfer (PEnT) from the singlet excited state of phenanthroimidazole to BODIPY and photoinduced electron transfer (PET) from the ground state of phenanthroimidazole to BODIPY. Transient absorption studies suggest that charge-separated species (PhI•+ - BODIPY•-) are generated at a rate constant of (1.16 ± 0.01) × 108 s-1 for the dyads Dyad1 and (5.15 ± 0.03) × 108 s-1 and for Dyad2 whereas energy transfer rate constants were much higher and were on the order of (1.1 ± 0.02) × 1010 s-1 and (1.6 ± 0.02) × 1010 s-1 for Dyad1 and Dyad2, respectively, signifying their usefulness in light energy harvesting applications.

Modulating Photoinduced Electron Transfer between Photosensitive MOF and Co(II) Proton Reduction Sites forBoosting Photocatalytic Hydrogen Production.

Photocatalytic hydrogen production viawater splitting is the subject of intense research. Photoinduced electron transfer (PET) between a photosensitizer (PS) and a proton reduction catalyst is a prerequisite step and crucial to affecting hydrogen production efficiency. Herein, three photoactive metal-organic framework (MOF) systems having two different PET processes where PS and Co(II) centers are either covalently bonded or coexisting to drive photocatalytic H2 production arebuilt. Compared to these two intramolecular PET systems including CoII -Zn-PDTP prepared from the post-synthetic metalation toward uncoordinated pyridine N sites of Zn-PDTP and sole cobalt-based MOF Co-PDTP, the CoII (bpy)3 @Zn-PDTP system impregnated by molecular cocatalyst possessing intermolecular PET process achieves the highest H2 evolution rate of 116.8mmol g-1 h-1 over a period of 10h, about 7.5 and 9.3 times compared to CoII -Zn-PDTP and Co-PDTP in visible-light-driven H2 evolution, respectively. Further studies reveal that the enhanced photoactivity in CoII (bpy)3 @Zn-PDTP canbe ascribed to the high charge-separation efficiency of Zn-PDTP and the synergistic intermolecular interaction between Zn-PDTP and cobalt complexes. The present work demonstrates that the rational design of PET process between MOFs and catalytic metal sites can be a viable strategy for the development of highly efficient photocatalysts with enhanced photocatalytic activities.

Spectroscopic and TD-DFT studies on the chromo-fluorogenic detection of cyanide ions in organic and aquo-organic media

A new naked-eye chromogenic and fluorogenic probe KS5 has been developed for the detection of CN– ions in neat DMSO and H2O:DMSO (1:1 v/v) media. The probe KS5 exhibited selectivity towards CN– and F− ions in organic and high selectivity towards CN– ions in aquo-organic media resulting in a colour change from brown to colourless and a turn-on fluorescence response. The probe could able to detect CN– ions via a deprotonation process, which was conceived by consecutive addition of hydroxide and hydrogen ions and confirmed using 1H NMR studies. The limit of detection (LOD) of KS5 towards CN– ions were in the range of 0.07–0.62 µM in both these solvent systems. Suppression of intra-molecular charge transfer (ICT) transition and photoinduced electron transfer (PET) process of KS5 by the added CN– ions are responsible for the chromogenic and fluorogenic changes observed, respectively. Density Functional Theory (DFT) and Time-Dependent Density Functional Theory (TD-DFT) calculations strongly supported the proposed mechanism along with the optical properties of the probe before and after the addition of CN– ions. To prove the practical applicability, KS5 was successfully utilized to detect CN– ions in cassava powder and bitter almonds as well as to determine CN– ions in various real water samples.

Systematic Conversion of Photoinduced Intramolecular Electron Transfer in Trinuclear M-Ir-M (M = Re, Ir) Complexes to Intersystem Charge Transfer by Coupling to Gold Nanoclusters

Two trinuclear cyclometalated iridium(III)-based complexes of M-Ir-M (M = Re, Ir) type were strategically designed with characteristically different electron distributions based on the electronegativities of Re and Ir. Photoinduced intramolecular electron transfer (PIIET) is readily observed in these complexes with different lifetimes of the radicals. The free amine ends of these symmetric complexes act as the electron donor for PIIET. These ends, on the other hand, can also act as centers for reducing gold (Au) salt (HAuCl4·3H2O) to generate Au atomistic nanoclusters (AuNCs) protected and templated by the trinuclear complexes. Formation of the AuNCs completely stops the PIIET and induces excited state intersystem charge transfer (ESICT) from the surrounding complexes to the AuNC core on exciting the system with radiation of the same wavelength. The trinuclear cyclometalated complexes were synthesized by chelation of the transition metal units, such as Re(CO)3Cl and Ir(ppy)2, to thiosemicarbazone (TSC) appended with cyclometalated ligands of the precursor Ir(III) complex. Such a phenomenon of conversion of PIIET in a trinuclear cyclometalated coordination complex completely to ESICT on coupling to a noble metal nanocluster is unique and promising for applications in energy devices.

Photoinduced Electron Transfer Modulated Photoelectric Signal: Toward an Organic Small Molecule-Based Photoelectrochemical Platform for Formaldehyde Detection.

Photoelectrochemical (PEC) sensing has been rapidly evolving in recent years, while the introduction of small molecules with specific recognition functions into the sensing interface remains a nascent area of study. In this work, we reported a PEC biosensor for formaldehyde (FA) detection based on photoinduced electron transfer (PET)-gated electron injection between organic small molecules and inorganic semiconducting substrates. Specifically, an FA-responsive probe (NA-FA-COOH) and TiO2 nanoarrays were integrated to construct a PEC platform (NFC/TiO2) via a coordination bond. NFC served simultaneously as a target-specific recognition element and a modulator of photoinduced electron injection. Treatment of NFC/TiO2 by FA would suppress the intramolecular PET process, with the quenched photocurrent signal due to the changed carrier transfer pathway, thus establishing the PEC platform for FA based on effective PET modulation. The proposed PEC system exhibited high selectivity and sensitivity, with a low detection limit of 0.071 μM. This study presents a novel perspective on the use of organic small molecules with a PET effect for advanced PEC bioanalysis.

Triarylamine-Substituted Benzimidazoliums as Electron Donor-Acceptor Dyad-Type Photocatalysts for Reductive Organic Transformations.

Triarylamine-substituted benzimidazoliums (BI+-PhNAr2), new electron donor-acceptor dyad molecules, were synthesized. Their photocatalytic properties for reductive organic transformations were explored using absorption and fluorescence spectroscopy, redox potential determinations, density functional theory calculations, transient absorption spectroscopy, and reduction reactions of selected substrates. The results show that irradiation of BI+-PhNAr2 promotes photoinduced intramolecular electron transfer to form a long-lived (∼300 μs) charge shifted state (BI•-PhN•+Ar2). In the pathway for photocatalysis of reduction reactions of substrates, BI•-PhN•+Ar2 is subsequently transformed to the neutral benzimidazolyl radical (BI•-PhNAr2) by single-electron transfer from the donor 1,3-dimethyl-2-phenylbenzimidazoline (BIH-Ph) serving as a cooperative agent. Among the benzimidazoliums explored, the bromo-substituted analogue BI+-PhN(C6H4Br-p)2 in conjunction with BIH-Ph demonstrates the most consistent catalytic performance.

A turn-on mode fluorescent diarylethene having an azacrown ether receptor: Metal-ion-gated enhancement of the photoreactivity and fluorescence

We report the metal-ion-gated enhancement of the photoreaction and fluorescence of a newly synthesized photoswitchable fluorescent diarylethene derivative having an azacrown ether receptor. In the absence of metal ions, the diarylethene molecule underwent the photoisomerization and turn-on mode switching of fluorescence, but the photoreactivity and fluorescing ability were suppressed by intramolecular photoinduced electron transfer (PET) from the azacrown ether moiety to the diarylethene unit. Upon binding of a metal ion to the azacrown ether, the PET process was blocked, and the photoreactivity and fluorescence were significantly enhanced. Such photoswitchable fluorescent molecules that change their photoresponsive properties upon recognizing metal ions have the potential to function as metal-ion chemosensors and molecular probes in metal-ion-sensitive super-resolution fluorescence microscopy.

Effective fluorescent turn-on detection of ionizing radiations through controllable intramolecular photoinduced electron transfer

In order to explore the detection of gamma radiation via intramolecular photoinduced electron transfer (PET) and the interaction between molecular structures and fluorescence enhancement, we conducted an in-depth study of the perylene tetracarboxylic diimide (PDI) series of fluorescent probes capable of detecting HCl in the non-polar CHCl3 solutions. To simulate the interaction between ionizing radiation and fluorescent molecules, we used HCl titration method to predict the ability of PDI-n to detect gamma rays. The results show that the combination of PDI-n and HCl can enhance the fluorescence through retro-PET process. In addition, the fluorescence enhancement multiple gradually decreased with the enlargement of alkylamine side chains. In the direct irradiation experiment of ionizing radiation, PDI-n can also show a good fluoresence enhancement to gamma rays. Similar to the above HCl titration tests, the fluorescence increament stronthly depends on the alkylamine side chains lengths. The maximum fluorescence increament of PDI-1 is 22.24, and the fluorescence enhancement multiple of PDI-1–PDI-4 decreases when increasing the alkyl chain length. Besides, combining density functional theory (DFT), time-dependent density functional theory (TDDFT) calculations and electrochemical tests, the relative positions of each energy level obtained from the experiment indicate that the PDI-n molecule is beneficial to the occurrence of the intramolecular PET effect. Using femtosecond transient absorption spectroscopy (fs-TAS) and transient fluorescence spectroscopy (TFS) tests, the lifetime of charge separation was obtained, and the efficiency of the PET process was characterized by the rate constant. We found that fluorescent molecules with shorter side chains can realize PET more efficiently. Therefore, this work exploits the intramolecular PET mechanism for efficiently detecting gamma rays using a series of fluorescent probes, and reveals the law of the influence of molecular chain length on the PET effect. Which provides theoretical support for the development of new materials for effective and sensitive detection of ionizing radiation.