Interresidue Nuclear Overhauser Effects Research Articles

Synthesis of a glycan hairpin

The primary sequence of a biopolymer encodes the essential information for folding, permitting to carry out sophisticated functions. Inspired by natural biopolymers, peptide and nucleic acid sequences have been designed to adopt particular three-dimensional (3D) shapes and programmed to exert specific functions. In contrast, synthetic glycans capable of autonomously folding into defined 3D conformations have so far not been explored owing to their structural complexity and lack of design rules. Here we generate a glycan that adopts a stable secondary structure not present in nature, a glycan hairpin, by combining natural glycan motifs, stabilized by a non-conventional hydrogen bond and hydrophobic interactions. Automated glycan assembly enabled rapid access to synthetic analogues, including site-specific 13C-labelled ones, for nuclear magnetic resonance conformational analysis. Long-range inter-residue nuclear Overhauser effects unequivocally confirmed the folded conformation of the synthetic glycan hairpin. The capacity to control the 3D shape across the pool of available monosaccharides has the potential to afford more foldamer scaffolds with programmable properties and functions.

SEQUENCE AND STRUCTURAL ANALYSIS OF κ-CARRAGEENAN-DERIVED OLIGOSACCHARIDES BY TWO-DIMENSIONAL NUCLEAR MAGNETIC RESONANCE1

κ-Carrageenan was hydrolyzed with mild hydrochloric acid and separated into a series of oligosaccharides, the sequences and structures of which were investigated by double-quantum filtered correlation spectroscopy (DQF-COSY), total correlation spectroscopy (TOCSY), heteronuclear multiple-quantum coherence (HMQC), and heteronuclear multiple-bond correlation (HMBC) techniques, respectively. The chemical structures and conformations of the individual sugar residues were identified, as well as the sequential connectivity of the oligosaccharides. The interresidue nuclear Overhauser effects (NOEs)/rotating frame Overhauser effects (ROEs) revealed an ordered helical structure of the carrageenan oligosaccharide chains. Therefore, a general two-dimensional (2-D) NMR methodology for the unambiguous sequence and structure analysis of κ-carrageenan-derived oligosaccharides was established in this study.

Design of an Active Ultrastable Single-chain Insulin Analog

Single-chain insulin (SCI) analogs provide insight into the inter-relation of hormone structure, function, and dynamics. Although compatible with wild-type structure, short connecting segments (<3 residues) prevent induced fit upon receptor binding and so are essentially without biological activity. Substantial but incomplete activity can be regained with increasing linker length. Here, we describe the design, structure, and function of a single-chain insulin analog (SCI-57) containing a 6-residue linker (GGGPRR). Native receptor-binding affinity (130 +/- 8% relative to the wild type) is achieved as hindrance by the linker is offset by favorable substitutions in the insulin moiety. The thermodynamic stability of SCI-57 is markedly increased (DeltaDeltaG(u) = 0.7 +/- 0.1 kcal/mol relative to the corresponding two-chain analog and 1.9 +/- 0.1 kcal/mol relative to wild-type insulin). Analysis of inter-residue nuclear Overhauser effects demonstrates that a native-like fold is maintained in solution. Surprisingly, the glycine-rich connecting segment folds against the insulin moiety: its central Pro contacts Val(A3) at the edge of the hydrophobic core, whereas the final Arg extends the A1-A8 alpha-helix. Comparison between SCI-57 and its parent two-chain analog reveals striking enhancement of multiple native-like nuclear Overhauser effects within the tethered protein. These contacts are consistent with wild-type crystal structures but are ordinarily attenuated in NMR spectra of two-chain analogs, presumably due to conformational fluctuations. Linker-specific damping of fluctuations provides evidence for the intrinsic flexibility of an insulin monomer. In addition to their biophysical interest, ultrastable SCIs may enhance the safety and efficacy of insulin replacement therapy in the developing world.

293 POSTER Phase I trial of the histone deacetylase inhibitor valproic acid with the topoisomerase I inhibitor, karenitecin in advanced melanoma

Ditercalinium (2,2′-{[4,4′-bipiperidine]-1,1′-diyldi-2,1-ethane-diyl}bis-{10-methoxy-7H pyrido[4,3-c]carbazolium} tetramethane sulfonate (NSC 366241)), a DNA bis-intercalating compound, is a potent anti-tumoral rigid dimer. Previous studies have shown that a reduced flexibility of the linking chain of such a dimer is essential for its biological activity. In order to understand, at the molecular level, the mechanism of action and the structure-activity relationships of this series of DNA intercalators, new dimers with additional methylene groups between the two piperidine rings have been synthesized. Addition of one methylene group in the chain preserved the activity, whereas addition of two methylene groups reduced the cytotoxicity, which finally disappeared when three methylene groups were inserted. Therefore, the study of the interaction of dimers bearing no (202), two (222) and three (232) methylene groups with the self-complementary hexanucleotide d(CGATCG)2 have been investigated by 1H and 31P nuclear magnetic resonance studies.The results reported here indicate that all dimers bis-intercalate into the minihelix. The intermolecular nuclear Overhauser effects (NOEs) between the dimers and the nucleotide lead to the conclusion that the three dimers intercalate with their rigid bis-ethyl bipiperidine chain fitting the major groove of the helix. Inter-residue nuclear Overhauser effects at the DNA level, as well as induced shifts, are discussed in relation to the conformational changes induced in DNA upon intercalation and to the different activity of the dimers.

Correlation of binding-loop internal dynamics with stability and function in potato I inhibitor family: relative contributions of Arg(50) and Arg(52) in Cucurbita maxima trypsin inhibitor-V as studied by site-directed mutagenesis and NMR spectroscopy.

The side chains of Arg(50) and Arg(52) at positions P(6)' and P(8)', respectively, anchor the binding loop to the protein scaffold by means of hydrogen bonds in Cucurbita maxima trypsin inhibitor-V (CMTI-V), a potato I family member. Here, we have investigated the relative contributions of Arg(50) and Arg(52) to the binding-loop flexibility and stability by determining changes in structure, dynamics, and proteolytic stability as a consequence of individually mutating them into an alanine. We have compared chemical shift assignments of main-chain hydrogens and nitrogens, and (1)H-(1)H interresidue nuclear Overhauser effects (NOEs) for the two mutants with those of the wild-type protein. We have also measured NMR longitudinal and transverse relaxation rates and (15)N-(1)H NOE enhancements for all backbone and side-chain NH groups and calculated the model-free parameters for R50A-rCMTI-V and R52A-rCMTI-V. The three-dimensional structures and backbone dynamics of the protein scaffold region remain very similar for both mutants, relative to the wild-type protein. The flexibility of the binding loop is increased in both R50A- and R52A-rCMTI-V. In R52A-rCMTI-V, the mean generalized order parameter (<S(2)>) of the P(6)-P(1) residues of the binding loop (39-44) decreases to 0.68 +/- 0.02 from 0.76 +/- 0.04 observed for the wild-type protein. However, in R50A-rCMTI-V, the flexibility of the whole binding loop increases, especially that of the P(1)'-P(3)' residues (45-47), whose <S(2)> value drops dramatically to 0.35 +/- 0.03 from 0.68 +/- 0.03 determined for rCMTI-V. More strikingly, S(2) values of side-chain N epsilon Hs reveal that, in the R50A mutant, removal of the R50 hydrogen bond results in the loss of the R52 hydrogen bond too, whereas in R52A, the R50 hydrogen bond remains unaffected. Kinetic data on trypsin-catalyzed hydrolysis of the reactive-site peptide bond (P(1)-P(1)') suggest that the activation free energy barrier of the reaction at 25 degrees C is reduced by 2.1 kcal/mol for R50A-rCMTI-V and by 1.5 kcal/mol for R52A-rCMTI-V, relative to rCMTI-V. Collectively, the results suggest that although both the P(6') and P(8)' anchors are required for optimal inhibitor function and stability in the potato I family, the former is essential for the existence of the latter and has greater influence on the binding-loop structure, dynamics, and stability.

The Unique Solution Structure and Immunochemistry of theCandida albicans β-1,2-Mannopyranan Cell Wall Antigens

Synthetic oligomers of the antigenic Candida albicans (1-->2)-beta-mannopyranans adopt a compact solution conformation that leads to numerous inter-residue nuclear Overhauser effects, including unprecedented nuclear Overhauser effects between n and n + 3 residues. In excellent agreement with experimentally determined distances, unrestrained molecular dynamics point to a single family of conformations that approximate a compact helical motif with a three-residue repeat for this unique homopolymer. When the synthetic di- to hexasaccharides were employed as inhibitors of monoclonal antibodies, which protect mice against a lethal dose of the yeast pathogen, a novel pattern of inhibitor activity was observed. Instead of the paradigm first reported by Kabat (Kabat, E. A. (1962) Fed. Proc. 21, 694-701; Kabat, E. A. (1966) J. Immunol. 97, 1-11), wherein homo-oligosaccharides exhibit increasing inhibitory activity with increasing size, here the maximum activity is reached for di- and trisaccharides and diminishes significantly for tetra-, penta-, and hexasaccharides. These immunochemical data correlate with the ordered conformation of the beta-1,2-linked mannopyranan and imply that a uniquely small antigenic determinant has potential as a component of synthetic conjugate vaccines against Candida albicans.

Molecular carpentry: piecing together helices and hairpins in designed peptides.

The design of a peptide that contains two distinct elements of secondary structure, helix and beta-hairpin, is described. Two designed 17-residue peptides: Boc-Val-Ala-Leu-Aib-Val-Ala-Leu-Gly-Gly-Leu-Phe-Val-D-Pro-Gly-Leu-Phe-Val-OMe (I) and Boc-Leu-Aib-Val-Ala-Leu-Aib-Val-Gly-Gly-Leu-Val-Val-D-Pro-Gly-Leu-Val-Val-OMe (II) have been conformationally characterized by NMR spectroscopy. Peptides I and II contain a seven-residue helical module at the N terminus and a eight-residue beta-hairpin module at the C terminus, which are connected by a conformationally flexible Gly-Gly segment. The choice of the secondary-structure modules is based upon prior crystallographic and spectroscopic analysis of the individual modules. Analysis of 500 MHz 1H NMR data, recorded as solutions in methanol, suggests that the observed pattern of chemical shifts, 3JHN CalphaH values, temperature coefficients of the NH chemical shifts, and backbone inter-residue nuclear Overhauser effects favor helical structures for residues 1-7 and beta-hairpin structures for residues 10-17. The spectroscopic data are compatible with termination of the helical segment by formation of a Schellman motif; this restricts Gly(8) to a left-handed alpha-helical conformation. Gly(9) is the only residue with multiple conformational possibilities in phi,psi space. Possible orientations of the two secondary-structure modules are considered. This study validates the use of stereochemically rigid peptide modules as prefabricated elements in the construction of synthetic protein mimics.

Three-dimensional solution structure of mouse [Cd7]-metallothionein-1 by homonuclear and heteronuclear NMR spectroscopy.

Sequential 1H-NMR assignments of mouse [Cd7]-metallothionein-1 (MT1) have been carried out by standard homonuclear NMR methods and the use of an accordion-heteronuclear multiple quantum correlation (HMQC) experiment for establishing the metal, 113Cd2+, to cysteine connectivities. The three-dimensional structure was then calculated using the distance constraints from two-dimensional nuclear Overhauser effect (NOE) spectroscopy spectra and the Cys-Cd connectivities as input for a distance geometry-dynamical simulated annealing protocol in X-PLOR 3.851. Similar to the mammalian MT2 isoforms, the homologous primary structure of MT1 suggested two separate domains, each containing one metal cluster. Because there were no interdomain constraints, the structure calculation for the N-terminal beta- and the C-terminal alpha-domain were carried out separately. The structures are based on 409 NMR constraints, consisting of 381 NOEs and 28 cysteine-metal connectivities. The only elements of regular secondary structure found were two short stretches of 3(10) helices along with some half-turns in the alpha-domain. Structural comparison with rat liver MT2 showed high similarity, with the beta-domain structure in mouse MT1 showing evidence of increased flexibility compared to the same domain in MT2. The latter was reflected by the presence of fewer interresidue NOEs, no slowly exchanging backbone amide protons, and enhanced cadmium-cadmium exchange rates found in the beta-domain of MT1.

Solution structure and base pair opening kinetics of the i-motif dimer of d(5mCCTTTACC): a noncanonical structure with possible roles in chromosome stability

Repetitive cytosine-rich DNA sequences have been identified in telomeres and centromeres of eukaryotic chromosomes. These sequences play a role in maintaining chromosome stability during replication and may be involved in chromosome pairing during meiosis. The C-rich repeats can fold into an 'i-motif' structure, in which two parallel-stranded duplexes with hemiprotonated C.C+ pairs are intercalated. Previous NMR studies of naturally occurring repeats have produced poor NMR spectra. This led us to investigate oligonucleotides, based on natural sequences, to produce higher quality spectra and thus provide further information as to the structure and possible biological function of the i-motif. NMR spectroscopy has shown that d(5mCCTTTACC) forms an i-motif dimer of symmetry-related and intercalated folded strands. The high-definition structure is computed on the basis of the build-up rates of 29 intraresidue and 35 interresidue nuclear Overhauser effect (NOE) connectivities. The i-motif core includes intercalated interstrand C.C+ pairs stacked in the order 2*.8/1.7*/1*.7/2.8* (where one strand is distinguished by an asterisk and the numbers relate to the base positions within the repeat). The TTTA sequences form two loops which span the two wide grooves on opposite sides of the i-motif core; the i-motif core is extended at both ends by the stacking of A6 onto C2.C8+. The lifetimes of pairs C2.C8+ and 5mC1.C7+ are 1 ms and 1 s, respectively, at 15 degrees C. Anomalous exchange properties of the T3 imino proton indicate hydrogen bonding to A6 N7 via a water bridge. The d(5mCCTTTTCC) deoxyoligonucleotide, in which position 6 is occupied by a thymidine instead of an adenine, also forms a symmetric i-motif dimer. However, in this structure the two TTTT loops are located on the same side of the i-motif core and the C.C+ pairs are formed by equivalent cytidines stacked in the order 8*.8/1.1*/7*.7/2.2*. Oligodeoxynucleotides containing two C-rich repeats can fold and dimerize into an i-motif. The change of folding topology resulting from the substitution of a single nucleoside emphasizes the influence of the loop residues on the i-motif structure formed by two folded strands.

13C-NMR relation study of heparin-disaccharide interactions with tripeptides GRG and GKG.

Heparin is a polydisperse sulphated copolymer consisting mostly of 1-->4 linked glucosamine and uronic acid residues, i.e. 2-deoxy-2-sulphamido-D-glucopyranose 6-sulphate and L-idopyranosyluronic acid 2-sulphate. 13C NMR has been used to study the interactions of heparinase-derived and purified heparin disaccharide with N- and C-terminally-blocked tripeptides GRG and GKG. Titration of the disaccharide with peptide indicates that GRG binds the disaccharide more strongly than does GKG, with interactions in either case being stronger at uronate ring positions. In the presence of GRG, a carboxylate pKa depression suggests electrostatic interactions between the arginine guanidinium group and the uronate carboxylate group. 13C relaxation data have been acquired for all disaccharide and peptide carbons in the presence and absence of GRG and GKG. 13C relaxation rates for the disaccharide are significantly faster in the presence of peptide, especially with GRG. Analysis of these relaxation data has been done in terms of molecular diffusion constants, D [symbol: see text] and D parallel, and an angle alpha between D parallel and a molecular frame defined by the moment of inertia tensor calculated for an internally rigid disaccharide. Disaccharide conformational space in these calculations has been sampled for both uronate half-chair forms (2H1 and 1H2) and over a range of glycosidic bond angles defined by motional order parameters and inter-residue nuclear Overhauser effects (+/- 30 degree from the average). In the absence of peptide, the ratio D [symbol: see text] /D parallel falls between 0.4 and 0.7; therefore molecular diffusion occurs preferentially about D parallel, which runs through both disaccharide rings. In the presence of peptide, D [symbol: see text] /D parallel is decreased, indicating that GRG is oriented along D parallel and proximal to the uronic acid ring. A model for this is shown.

Toward solving the folding pathway of barnase: the complete backbone 13C, 15N, and 1H NMR assignments of its pH-denatured state.

The structures of the major folding intermediate, the transition state for folding, and the folded state of barnase have been previously characterized. We now add a further step toward a complete picture of the folding of barnase by reporting the backbone 15N, 13C, and 1H NMR assignments for barnase unfolded at pH 1.8 and 30 degrees C. These assignments, which were obtained from a combination of heteronuclear magnetization transfer and backbone triple-resonance NMR experiments, constitute the first stage in the structural characterization of this denatured state by NMR. Interresidue nuclear Overhauser effect contacts and deviations from 1H random-coil chemical shifts provide evidence for stable residual structure. The structured regions span residues in the native protein that contain its major alpha-helix and central strands of the beta-sheet. Earlier experiments have shown that these regions are predominantly intact in the major folding intermediate and that their docking is partly rate determining in folding.

Solution structure of RP 71955, a new 21 amino acid tricyclic peptide active against HIV-1 virus

The structure of RP 71955, a new tricyclic 21 amino acid peptide active against human immunodeficiency virus 1, was determined. Its amino acid composition was inferred from the results of fast atom bombardment mass spectrometry, nuclear magnetic resonance, Raman spectroscopy, and amino acid analysis. Its sequence could not be determined classically, using Edman degradation, given the lack of a free terminal NH2. It was deduced from the interpretation of interresidue nuclear Overhauser effects and confirmed by the sequencing of peptides obtained by limited chemical hydrolysis. It was found to be CLGIGSCNDFAGCGYAVVCFW. An internal amide bond between the NH2 of C1 and the gamma-COOH of D9 was observed, as well as two disulfide bridges, one between C1 and C13 and one between C7 and C19. The three-dimensional structure of RP 71955 was determined from nuclear magnetic resonance derived constraints using distance geometry, restrained molecular dynamics, nuclear Overhauser effect back calculation, and an iterative refinement using a full relaxation matrix approach. Analogies between the structure of RP 71955 and some functional domains of gp41, the transmembrane protein of human immunodeficiency virus 1, suggest hypotheses concerning the mode of action of RP 71955.

Sequential Proton NMR Resonance Assignments, Circular Dichroism, and Structural Properties of a 50-Residue Substrate-Binding Peptide from DNA Polymerase I

Peptide I, a 50-amino acid synthetic peptide based on residues 728 to 777 of DNA polymerase I, binds dNTP substrates and duplex DNA (G. Mullen, P. Shenbaga-murthi, and A. S. Mildvan, J. Biol. Chem. 264, 19637-19647, 1988). The structural properties of peptide I at pH 3.9 have been studied by CD spectroscopy and by 2D proton NMR at 600 MHz. The CD spectra are fit by assuming that peptide I contains 17% helix, 17% β-structure, and 66% coil. The substrate dATP binds tightly to peptide I under these conditions ( K D = 0.5 μM) as determined by fluorescence quenching but induces no change in peptide conformation, as detected by CD spectroscopy. Proton resonances of peptide I have been assigned by double quantum filtered correlated spectroscopy, total correlated spectroscopy, and nuclear Overhauser effect spectroscopy. As found with other peptides, peptide I is best characterized by both extended and partially folded secondary structures which equilibrate rapidly on the NMU time scale. A region from residues 3 through 10 displays nuclear Overhauser effects (NOEs) consistent with the rapid equilibration of a nascent helix with a random extended structure. Alternatively this segment of residues is consistent with a series of three opened-out turns. A nonclassical turn is found between residues 14 and 17 and from residues 44 to 47, the latter closing irregular antiparallel strands from residues 42 to 48. The remainder of the peptide is a coil. A residue-by-residue comparison of the best-fit solution structure of the peptide with that of the corresponding sequence in the X-ray structure of the complete enzyme reveals that 36% of the amino acids are found to be in a conformation similar to that in the enzyme. Such partial and transient folding of the peptide indicates that the major role of the remainder of the protein is to provide structural support for the active site region of the enzyme. As detected by interresidue NOEs and NOEs to water protons, the homologous sequence Leu-37-Ile-38-Tyr-39-Gly-40, together with Phe-15 of the peptide, provides an exposed hydrophobic cluster of residues which may constitute the substrate binding site. An exposed cluster of cationic residues consisting of Arg-27, Arg-28, Lys-31, and possibly Arg-48 may provide the binding site for duplex DNA.

Solution structure of human corticotropin releasing factor by 1H NMR and distance geometry with restrained molecular dynamics.

The structure of human corticotropin releasing factor (hCRF) has been determined by proton nuclear magnetic resonance (1H NMR) in a mixed-solvent system of 66% trifluoroethanol/34% H2O at pH 3.8 and 37 degrees C. Nearly complete resonance assignment was achieved by using standard two-dimensional methods. Distance restraints for structure calculations were obtained by qualitative analysis of intra- and inter-residue nuclear Overhauser effects. Structures were obtained from the distance restraints by distance geometry, followed by refinement using molecular dynamics and were completed with amide hydrogen exchange data. The structure of hCRF in this solvent comprises an extended N-terminal tetrapeptide connected to a well-defined alpha-helix between residues 6 and 36. The first half of the alpha-helix (residues 6-20) is clearly amphipathic. The five carboxy-terminal residues are predominantly disordered.

Internal motional averaging and three-dimensional structure determination by nuclear magnetic resonance

Dynamic averaging effects from internal motions on interproton distances estimated from nuclear Overhauser effects (NOE) are determined by using a molecular dynamics simulation of lysozyme. Generalized order parameters measuring angular averaging and radial averaging parameters are calculated. The product of these two parameters describes the full averaging effects on cross-relaxation. Analysis of 2778 non-methyl NOE interactions from the protein interior and surface indicates that distances estimated by assuming a rigid molecule have less than 10% error for 89% of the NOE interactions. However, analysis of 1854 methyl interactions found that only 68% of the distances estimated from cross-relaxation rates would have less than 10% error. Qualitative evaluation of distances according to strong, medium and weak NOE intensities, when used to define only the upper bound for interproton separation, would misassign less than 1% of the distance constraints because of motional averaging. Internal motions do not obscure the identification of secondary structure, although some instances of significant averaging effects were found for interactions in α-helical regions. Interresidue NOEs for amino acids more than three residues apart in the primary sequence are more extensively averaged than intraresidue or shortrange interresidue NOEs. Intraresidue interactions exhibit a greater degree of angular averaging than those involving interresidue proton pairs. An internal motion does not equally affect all NOE interactions for a particular proton. Thus, incorporation of averaging parameters in nuclear magnetic resonance structure determination procedures must be made on a proton-pair-wise basis. On the basis of the motional averaging results, particular fixed-distance proton pairs in proteins are suggested for use as distance references. A small percentage of NOE pairs localized to three regions of the protein exhibit extreme averaging effects from internal motions. The regions and types of motions involved are described.

Solution structure of human calcitonin gene-related peptide by proton NMR and distance geometry with restrained molecular dynamics

The structure of human calcitonin gene-related peptide 1 (hCGRP-1) has been determined by 1H NMR in a mixed-solvent system of 50% trifluoroethanol/50% H2O at pH 3.7 and 27 degrees C. Complete resonance assignment was achieved by using two-dimensional methods. Distance restraints for structure calculations were obtained by semiquantitative analysis of intra- and interresidue nuclear Overhauser effects; in addition, stereospecific or X1 rotamer assignments were obtained for certain side chains. Structures were generated from the distance restraints by distance geometry, followed by refinement using molecular dynamics, and were compared with experimental NH-C alpha H coupling constants and amide hydrogen exchange data. The structure of hCGRP-1 in this solvent comprises an amino-terminal disulfide-bonded loop (residues 2-7) leading into a well-defined alpha-helix between residues 8 and 18; thereafter, the structure is predominantly disordered, although there are indications of a preference for a turn-type conformation between residues 19 and 21. Comparison of spectra for the homologous hCGRP-2 with those of hCGRP-1 indicates that the conformations of these two forms are essentially identical.

Synthetic peptide models for protein secondary structures β‐Sheet formation in acyclic cystine peptides

The conformations of the symmetrical cystine peptides Boc-Cys-(Val)n-Trp-OMe Boc-Cys-(Val)n-Trp-OMe (n = 1, 1; 2, 2; 3, 3) have been examined in solution, in order to evaluate the use of disulfide crosslinks in stabilizing extended beta-strand conformations in acyclic sequences. NMR studies in (CD3)2SO provide evidence for the solvent inaccessible nature of the Val(2) NH group in peptides 1 and 2. JHNCH alpha H values are indicative of extended structures. Sequential interresidue nuclear Overhauser effects support the population of beta-strand structures in both peptides. The fluorescence quantum yield of tryptophan determined in methanol follows the order 2 greater than 1 approximately 3. Reduction of the disulfides with NaBH4 results in large enhancements of emission intensity, with the changes following the order 1 greater than 3 much greater than 2. The order of quenching is a function of the disposition of the indole and disulfide sidechains in an extended beta-sheet structure.

Kinetic and conformational effects of lysine substitutions for arginines 35 and 87 in the active site of staphylococcal nuclease

The high-resolution X-ray crystal structure of staphylococcal nuclease (SNase) suggests that the guanidinium groups of Arg 35 and Arg 87 participate as electrophilic catalysts in the attack of water on the substrate phosphodiester. Both arginine residues have been replaced with "conservative" lysine residues so that both the importance of these residues in catalysis and the effect of changes in electrostatic interactions on active site conformation can be assessed. The catalytic efficiencies of R35K and R87K are decreased by factors of 10(4) and 10(5) relative to wild-type SNase, with R87K showing a very significant reduction in its affinity for both DNA substrate and the competitive inhibitor thymidine 3',5'-bisphosphate (pdTp). The thermal denaturation behavior of both mutant enzymes differs from that of wild type both in the absence and in the presence of the active site ligands Ca2+ and pdTp. Both the 1H NMR chemical shifts and interresidue nuclear Overhauser effects (NOEs) of residues previously assigned to be in the hydrophobic core of SNase are altered in R35K and R87K. These observations, similar to those recently reported by our laboratories for substitutions for Glu 43 [Hibler, D. W., Stolowich, N. J., Reynolds, M. A., Gerlt, J. A., Wilde, J. A., & Bolton, P. H. (1987) Biochemistry 26, 6278; Wilde, J. A., Bolton, P. H., Dell'Acqua, M., Hibler, D. W., Pourmotabbed, T., & Gerlt, J. A. (1988) Biochemistry 27, 4127], suggest that lysine substitutions are not conservative in SNase and disrupt the conformation of the active site.(ABSTRACT TRUNCATED AT 250 WORDS)

II. 1H-NMR studies of sarmesin and [des 1]sarmesin conformation in dimethylsulfoxide by nuclear Overhauser effect (NOE) enhancement spectroscopy: Folding of the N- and C-terminal domains

The conformational properties of the competitive angiotensin II antagonist sarmesin [Sar-Arg-Val-Tyr(Me)-His-Pro-Phe] and its heptapeptide analogue [des 1]sarmesin in dimethylsulphoxide-d 6 were investigated by nuclear Overhauser effect (NOE) enhancement studies. Assignment of all backbone and side-chain protons was possible by combining information from intraresidue NOE studies with two-dimensional correlated spectroscopy (COSY) studies. Saturation of the His C α proton of sarmesin produced essentially the same interresidue NOE enhancement of the two Pro C δ protons, illustrating the presence of the trans His-Pro bond. Saturation of the Sar N-methyl group caused enhancement of one of the His C β protons, suggesting the presence of a turn in the N-terminal region of the molecule. Saturation of His C 2 in sarmesin and [des 1]sarmesin enhanced the Tyr(Me) methyl signal. Saturation of the Tyr(Me) methyl protons in [des 1]sarmesin produced NOE enhancement of the His C 2 and C 4 protons, and saturation of the His C 2 proton enhanced the Tyr(Me) meta and ortho proton signals. Interresidue interactions between the Tyr(Me) and His protons in sarmesin and [des 1]sarmesin illustrate that these two side-chains remain in close proximity even in the absence of the postulated hydrogen bond between Tyr hydroxyl and the His imidazole ring in angiotensin II. The data suggest a preferred conformation for sarmesin in DMSO in which the peptide backbone is S-shaped and similar to that for angiotensin II.

NMR studies of Arc repressor mutants: proton assignments, secondary structure, and long-range contacts for the thermostable proline-8----leucine variant of Arc.

Arc repressor is a 53-residue sequence-specific DNA binding protein. We report the assignment of the proton NMR spectrum and the secondary structure for the thermostable PL8 variant of Arc. This mutant, which differs from wild type by a Pro-8----Leu substitution, was chosen for study because its enhanced stability allows spectra to be acquired at elevated temperatures where spectral resolution is higher. The first five residues of the protein play important roles in DNA binding but appear to be disordered in solution. Residues 6-14 form the remaining part of the N-terminal DNA binding region of the protein and assume an antiparallel beta-conformation. This indicates that Arc is a member of a new class of DNA binding proteins. The observed interresidue nuclear Overhauser effects are consistent with a beta-strand, gamma-turn, beta-strand structure for the residue 6-14 region, although other structures are also consistent with the data. The remaining portion of the protein is predominantly alpha-helical. Residues 16-26 and 35-50 form amphipathic alpha-helices which may pack together in a four-helix bundle in the protein dimer.