Interpretable Electron-density Map Research Articles

Crystal structure determination of the armadillo repeat domain of Drosophila SARM1 using MIRAS phasing.

The crystal structure determination of the armadillo repeat motif (ARM) domain of Drosophila SARM1 (dSARM1ARM) is described, which required the combination of a number of sources of phase information in order to obtain interpretable electron-density maps. SARM1 is a central executioner of programmed axon degeneration, a common feature of the early phase of many neurodegenerative diseases. SARM1 is held in the inactive state in healthy axons by its N-terminal auto-inhibitory ARM domain, and is activated to cleave NAD upon injury, triggering subsequent axon degeneration. To characterize the molecular mechanism of SARM1 activation, it was sought to determine the crystal structure of the SARM1 ARM domain. Here, the recombinant production and crystallization of dSARM1ARM is described, as well as the unconventional process used for structure determination. Crystals were obtained in the presence of NMN, a precursor of NAD and a potential activator of SARM1, only after in situ proteolysis of the N-terminal 63 residues. After molecular-replacement attempts failed, the crystal structure of dSARM1ARM was determined at 1.65 Å resolution using the MIRAS phasing technique with autoSHARP, combining data from native, selenomethionine-labelled and bromide-soaked crystals. The structure will further the understanding of SARM1 regulation.

The adhesive PitA pilus protein from the early dental plaque colonizer Streptococcus oralis: expression, purification, crystallization and X-ray diffraction analysis.

PitA is the putative tip adhesin of the pilus islet 2 (PI-2)-encoded sortase-dependent pilus in the Gram-positive Streptococcus oralis, an opportunistic pathogen that often flourishes within the diseased human oral cavity. Early colonization by S. oralis and its interaction with Actinomyces oris seeds the development of oral biofilm or dental plaque. Here, the PI-2 pilus plays a vital role in mediating adherence to host surfaces and other bacteria. A recombinant form of the PitA adhesin has now been produced and crystallized. Owing to the large size (∼100 kDa), flexibility and complicated folding of PitA, obtaining diffraction-quality crystals has been a challenge. However, by the use of limited proteolysis with α-chymotrypsin, the diffraction quality of the PitA crystals was considerably enhanced to 2.16 Å resolution. These crystals belonged to space group P1, with unit-cell parameters a = 61.48, b = 70.87, c=82.46 Å, α = 80.08, β=87.02, γ = 87.70°. The anomalous signal from the terbium derivative of α-chymotrypsin-treated PitA crystals prepared with terbium crystallophore (Tb-Xo4) was sufficient to obtain an interpretable electron-density map via terbium SAD phasing.

SpaB, an atypically adhesive basal pilin from the lactobacillar SpaCBA pilus: crystallization and X-ray diffraction analysis.

The SpaB pilin is recognized as the basal subunit of the sortase-dependent SpaCBA pilus, which is known to be produced by the Gram-positive Lactobacillus rhamnosus GG, a gut-adapted commensal advocated to have health benefits. Despite seeming to function as an archetypal basal pilin by serving as the terminal subunit in pilus assembly, SpaB also assumes an atypical role as a mucoadhesive protein. To shed light on the structural factors that contribute to this dual functional behaviour, a recombinant form of the L. rhamnosus GG SpaB pilin was produced and purified for crystallization and X-ray diffraction experiments. The crystallization of SpaB remained particularly challenging until the implementation of a three-pronged crystallization approach involving C-terminal tail truncation, surface lysine methylation and magnesium additives. Ultimately, hexagonal crystals of SpaB were produced and were able to diffract to a resolution of 2.4 Å. This crystal form belonged to space group P6522 or P6122, with unit-cell parameters a = b = 51.53, c = 408.22 Å, α = β = 90.0, γ=120.0°. Obtaining an interpretable electron-density map via single-wavelength anomalous diffraction (SAD) using iodide-derivative data sets did not succeed owing to the weak anomalous signal. As an alternative, attempts to provide phases by molecular replacement using the iodide-SAD data from SpaB and a collection of distant homology models (<28% sequence identity) are in progress.

The galactoside 2-α-L-fucosyltransferase FUT1 from Arabidopsis thaliana: crystallization and experimental MAD phasing.

The plant cell wall is a complex network of polysaccharides made up of cellulose, hemicelluloses and pectins. Xyloglucan (XyG), which is the main hemicellulosic component of dicotyledonous plants, has attracted much attention for its role in plant development and for its many industrial applications. The XyG-specific fucosyltransferase (FUT1) adds a fucose residue from GDP-fucose to the 2-O position of the terminal galactosyl residues on XyG side chains. Recombinant FUT1 from Arabidopsis thaliana was crystallized in two different crystal forms, with the best diffracting crystals (up to 1.95 Å resolution) belonging to the monoclinic space group P21, with unit-cell parameters a = 87.6, b = 84.5, c=150.3 Å, β = 96.3°. Ab initio phases were determined using a two-wavelength anomalous dispersion experiment on a tantalum bromide-derivatized crystal with data collected at the rising and descending inflection points of the Ta white line. An interpretable electron-density map was obtained after elaborate density modification. Model completion and structural analysis are currently under way.

Cloning, expression, purification, crystallization and X-ray crystallographic analysis of CofB, the minor pilin subunit of CFA/III from human enterotoxigenic Escherichia coli.

Colonization factor antigen III (CFA/III) is one of the virulence factors of human enterotoxigenic Escherichia coli (ETEC) that forms the long, thin, proteinaceous fibres of type IV pili through assembly of its major and minor subunits CofA and CofB, respectively. The crystal structure of CofA has recently been reported; however, the lack of structural information for CofB, the largest among the known type IV pilin subunits, hampers a comprehensive understanding of CFA/III pili. In this study, constructs of wild-type CofB with an N-terminal truncation and the corresponding SeMet derivative were cloned, expressed, purified and crystallized. The crystals belonged to the rhombohedral space group R32, with unit-cell parameters a = b = 103.97, c = 364.57 Å for the wild-type construct and a = b = 103.47, c = 362.08 Å for the SeMet-derivatized form. Although the diffraction quality of these crystals was initially very poor, dehydration of the crystals substantially improved the resolution limit from ∼ 4.0 to ∼ 2.0 Å. The initial phase was solved by the single-wavelength anomalous dispersion (SAD) method using a dehydrated SeMet CofB crystal, which resulted in an interpretable electron-density map.

Purification, crystallization and preliminary X-ray diffraction analysis of SpaD, a backbone-pilin subunit encoded by the fimbrial spaFED operon in Lactobacillus rhamnosus GG.

SpaD is the predicted backbone-pilin subunit of the SpaFED pilus, whose loci are encoded by the fimbrial spaFED operon in Lactobacillus rhamnosus GG, a Gram-positive gut-adapted commensal strain with perceived probiotic benefits. In this study, soluble recombinant SpaD protein was overproduced in Escherichia coli and then purified by Ni2+-chelating affinity and gel-filtration chromatography. After limited proteolysis with α-chymotrypsin, good-quality crystals of SpaD were obtained which diffracted beyond 2.0 Å resolution. These crystals belonged to the orthorhombic space group P2(1)2(1)2(1), with unit-cell parameters a=50.11, b=83.27, c=149.65 Å. For phasing, sodium iodide-derivatized crystals were prepared using the halide quick-soaking method and diffraction data were collected in-house to a resolution of 2.2 Å. An interpretable electron-density map was successfully obtained using single-wavelength anomalous diffraction (SAD).

Preliminary X-ray diffraction analysis of CfaA, a molecular chaperone essential for the assembly of CFA/I fimbriae of human enterotoxigenic Escherichia coli.

Understanding of pilus bioassembly in Gram-negative bacteria stems mainly from studies of P pili and type 1 fimbriae of uropathogenic Escherichia coli, which are mediated by the classic chaperone-usher pathway (CUP). However, CFA/I fimbriae, a class 5 fimbria and intestinal colonization factor for enterotoxigenic E. coli (ETEC), are proposed to assemble via the alternate chaperone pathway (ACP). Both CUP and ACP fimbrial bioassembly pathways require the function of a periplasmic chaperone, but their corresponding proteins share very low similarity in primary sequence. Here, the crystallization of the CFA/I periplasmic chaperone CfaA by the hanging-drop vapor-diffusion method is reported. X-ray diffraction data sets were collected from a native CfaA crystal to 2 Å resolution and to 1.8 and 2.8 Å resolution, respectively, from a lead and a platinum derivative. These crystals displayed the symmetry of space group C2, with unit-cell parameters a = 103.6, b = 28.68, c = 90.60 Å, β = 119.7°. Initial phases were derived from multiple isomorphous replacement with anomalous scattering experiments using the data from the platinum and lead derivatives. This resulted in an interpretable electron-density map showing one CfaA molecule in an asymmetric unit. Sequence assignments were aided by anomalous signals from the heavy-atom derivatives. Refinement of the atomic model of CfaA is ongoing, which is expected to further understanding of the essential aspects and allowable variations in tertiary structure of the greater family of chaperones involved in chaperone-usher mediated bioassembly.

New crystal forms of NTPDase1 from the bacterium Legionella pneumophila.

Nucleoside triphosphate diphosphohydrolases (NTPDases) are a large class of nucleotidases that hydrolyze the (γ/β)- and (β/α)-anhydride bonds of nucleoside triphosphates and diphosphates, respectively. NTPDases are found throughout the eukaryotic domain. In addition, a very small number of members can be found in bacteria, most of which live as parasites of eukaryotic hosts. NTPDases of intracellular and extracellular parasites are emerging as important regulators for the survival of the parasite. To deepen the knowledge of the structure and function of this enzyme class, recombinant production of the NTPDase1 from the bacterium Legionella pneumophila has been established. The protein could be crystallized in six crystal forms, of which one has been described previously. The crystals diffracted to resolutions of between 1.4 and 2.5 Å. Experimental phases determined by a sulfur SAD experiment using an orthorhombic crystal form produced an interpretable electron-density map.

Autoproteolytic Activation of a Symbiosis-regulated Truffle Phospholipase A2

Fungal phospholipases are members of the fungal/bacterial group XIV secreted phospholipases A(2) (sPLA(2)s). TbSP1, the sPLA(2) primarily addressed in this study, is up-regulated by nutrient deprivation and is preferentially expressed in the symbiotic stage of the ectomycorrhizal fungus Tuber borchii. A peculiar feature of this phospholipase and of its ortholog from the black truffle Tuber melanosporum is the presence of a 54-amino acid sequence of unknown functional significance, interposed between the signal peptide and the start of the conserved catalytic core of the enzyme. X-ray diffraction analysis of a recombinant TbSP1 form corresponding to the secreted protein previously identified in T. borchii mycelia revealed a structure comprising the five α-helices that form the phospholipase catalytic module but lacking the N-terminal 54 amino acids. This finding led to a series of functional studies that showed that TbSP1, as well as its T. melanosporum ortholog, is a self-processing pro-phospholipase A(2), whose phospholipase activity increases up to 80-fold following autoproteolytic removal of the N-terminal peptide. Proteolytic cleavage occurs within a serine-rich, intrinsically flexible region of TbSP1, does not involve the phospholipase active site, and proceeds via an intermolecular mechanism. Autoproteolytic activation, which also takes place at the surface of nutrient-starved, sPLA(2) overexpressing hyphae, may strengthen and further control the effects of phospholipase up-regulation in response to nutrient deprivation, also in the context of symbiosis establishment and mycorrhiza formation.

Crystallization, X-ray diffraction analysis and SIRAS phasing of human α-L-iduronidase

Human lysosomal α-L-iduronidase, whose deficiency causes mucopolysaccharidosis type I, was crystallized using sodium/potassium tartrate and polyethylene glycol 3350 as a precipitant. Using synchrotron radiation, a native data set was collected from a single crystal at 100 K to 2.3 Å resolution. The crystal belonged to space group R3 with unit-cell dimensions of a=b=259.22, c=71.83 Å. To obtain the phase information, mercury-derivative crystals were prepared and a single-wavelength anomalous dispersion (SAD) data set was collected at the Hg peak wavelength. Phase calculation with the single isomorphous replacement with anomalous scattering (SIRAS) method successfully yielded an interpretable electron-density map.

Expression, purification, crystallization and preliminary X-ray crystallographic analysis of Enpp1.

Enpp1 is an extracellular membrane-bound glycoprotein that regulates bone mineralization by hydrolyzing ATP to generate pyrophosphate. The extracellular region of mouse Enpp1 was expressed in HEK293S GnT1(-) cells, purified using the TARGET tag/P20.1-Sepharose system and crystallized. An X-ray diffraction data set was collected to 3.0 Å resolution. The crystal belonged to space group P3(1), with unit-cell parameters a = b = 105.3, c = 173.7 Å. A single-wavelength anomalous dispersion (SAD) data set was also collected to 2.7 Å resolution using a selenomethionine-labelled crystal. The experimental phases determined by the SAD method produced an interpretable electron-density map.

In-house SAD phasing with surface-bound cerium ions.

The anomalous signal of cerium(III) ions present in a derivative of hen egg-white lysozyme (HEWL) crystals obtained by the addition of 0.025 M cerium chloride to the crystallization medium was used for phasing. X-ray intensity data were collected to 2 Å resolution using an in-house Cu Kα radiation data-collection facility. Phasing of a single-wavelength data set purely based on its f'' led to a clearly interpretable electron-density map. Automated substructure solution by AutoSol in PHENIX resulted in four highest peaks corresponding to cerium(III) ions with data limited to 3 Å resolution, and about 90% of the residues were built automatically by AutoBuild in PHENIX. Cerium(III) ions bound on the surface of the enzyme are found to interact mainly with the main-chain and side-chain carbonyl groups of Asn, Glu, Tyr and Asp and with water molecules. Ce(3+) ions were used as potential anomalous scatterers for the in-house single-wavelength anomalous scattering technique, and this is proposed as a tool for macromolecular phasing and for the study of the interactions of trivalent metal ions with proteins and other macromolecules.

Application of a real-space three-dimensional image reconstruction method in the structural analysis of noncrystalline biological macromolecules enveloped by water in coherent x-ray diffraction microscopy

Coherent x-ray diffraction microscopy is a novel technique in the structural analyses of particles that are difficult to crystallize, such as the biological particles composing living cells. As water is indispensable for maintaining particles in functional structures, sufficient hydration of targeted particles is required during sample preparation for diffraction microscopy experiments. However, the water enveloping particles also contributes significantly to the diffraction patterns and reduces the electron-density contrast of the sample particles. In this study, we propose a protocol for the structural analyses of particles in water by applying a three-dimensional reconstruction method in real space for the projection images phase-retrieved from diffraction patterns, together with a developed density modification technique. We examined the feasibility of the protocol through three simulations involving a protein molecule in a vacuum, and enveloped in either a droplet or a cube-shaped water. The simulations were carried out for the diffraction patterns in the reciprocal planes normal to the incident x-ray beam. This assumption and the simulation conditions corresponded to experiments using x-ray wavelengths of shorter than 0.03Å. The analyses demonstrated that our protocol provided an interpretable electron-density map. Based on the results, we discuss the advantages and limitations of the proposed protocol and its practical application for experimental data. In particular, we examined the influence of Poisson noise in diffraction patterns on the reconstructed three-dimensional electron density in the proposed protocol.

X-CHIP: an integrated platform for high-throughput protein crystallization and on-the-chip X-ray diffraction data collection.

The X-CHIP (X-ray Crystallization High-throughput Integrated Platform) is a novel microchip that has been developed to combine multiple steps of the crystallographic pipeline from crystallization to diffraction data collection on a single device to streamline the entire process. The system has been designed for crystallization condition screening, visual crystal inspection, initial X-ray screening and data collection in a high-throughput fashion. X-ray diffraction data acquisition can be performed directly on-the-chip at room temperature using an in situ approach. The capabilities of the chip eliminate the necessity for manual crystal handling and cryoprotection of crystal samples, while allowing data collection from multiple crystals in the same drop. This technology would be especially beneficial for projects with large volumes of data, such as protein-complex studies and fragment-based screening. The platform employs hydrophilic and hydrophobic concentric ring surfaces on a miniature plate transparent to visible light and X-rays to create a well defined and stable microbatch crystallization environment. The results of crystallization and data-collection experiments demonstrate that high-quality well diffracting crystals can be grown and high-resolution diffraction data sets can be collected using this technology. Furthermore, the quality of a single-wavelength anomalous dispersion data set collected with the X-CHIP at room temperature was sufficient to generate interpretable electron-density maps. This technology is highly resource-efficient owing to the use of nanolitre-scale drop volumes. It does not require any modification for most in-house and synchrotron beamline systems and offers a promising opportunity for full automation of the X-ray structure-determination process.

Purification, crystallization and halide phasing of a Streptococcus agalactiae backbone pilin GBS80 fragment.

The Gram-positive pathogen Streptococcus agalactiae or group B streptococcus (GBS) is the leading cause of bacterial septicemia, pneumonia and meningitis among neonates around the world. The pathogen assembles two types of pili on its surface, named PI-1 and PI-2, that mediate bacterial adherence to host cells. The GBS PI-1 pilus is formed by the major pilin GBS80, which forms the pilus shaft, and two minor pilins GBS104 and GBS52, which are incorporated into thepilus structure. While considerable structural information exists on Gram-negative pili, the structural study of Gram-positive pili is an emerging area of research. Here, the purification, crystallization and initial phasing of the 35 kDa major fragment of the backbone pilin GBS80 are reported. Crystals were obtained in two different space groups: P2(1) and C2. SAD data collected from an iodide-derivative crystal at the home source were used to obtain initial phases and interpretable electron-density maps.

Crystallization and preliminary structural analysis of the giant haemoglobin from Glossoscolex paulistus at 3.2 Å.

Glossoscolex paulistus is a free-living earthworm encountered in south-east Brazil. Its oxygen transport requirements are undertaken by a giant extracellular haemoglobin, or erythrocruorin (HbGp), which has an approximate molecular mass of 3.6 MDa and, by analogy with its homologue from Lumbricus terrestris (HbLt), is believed to be composed of a total of 180 polypeptide chains. In the present work the full 3.6 MDa particle in its cyanomet state was purified and crystallized using sodium citrate or PEG8000 as precipitant. The crystals contain one-quarter of the full particle in the asymmetric unit of the I222 cell and have parameters of a = 270.8 Å, b = 320.3 Å and c = 332.4 Å. Diffraction data were collected to 3.15 Å using synchrotron radiation on beamline X29A at the Brookhaven National Laboratory and represent the highest resolution data described to date for similar erythrocruorins. The structure was solved by molecular replacement using a search model corresponding to one-twelfth of its homologue from HbLt. This revealed that HbGp belongs to the type I class of erythrocruorins and provided an interpretable initial electron density map in which many features including the haem groups and disulfide bonds could be identified.

With phases: how two wrongs can sometimes make a right

In isolation, both weak isomorphous/anomalous difference signals from heavy-atom derivatization and phases from partial molecular-replacement solutions for a subset of the asymmetric unit often fall short of producing interpretable electron-density maps. Phases generated from very partial molecular-replacement models (if generated carefully) can be used to reliably locate heavy-atom sites, even if the signal is not sufficiently strong to allow robust finding of the sites using Patterson interpretation or direct methods. Additional advantages are that using molecular-replacement phases to define the heavy-atom substructure avoids the need for subsequent hand determination and/or origin-choice reconciliation and that the partial model can be used to aid the mask determination during solvent flattening. Two case studies are presented in which it was only by combining experimental and molecular-replacement phasing approaches that the crystal structures could be determined.

Molecular Basis of Transcriptional Mutagenesis at 8-Oxoguanine

Structure-function analysis has revealed the mechanism of yeast RNA polymerase II transcription at 8-oxoguanine (8-oxoG), the major DNA lesion resulting from oxidative stress. When polymerase II encounters 8-oxoG in the DNA template strand, it can misincorporate adenine, which forms a Hoogsteen bp with 8-oxoG at the active center. This requires rotation of the 8-oxoG base from the standard anti- to an uncommon syn-conformation, which likely occurs during 8-oxoG loading into the active site. The misincorporated adenine escapes intrinsic proofreading, resulting in transcriptional mutagenesis that is observed directly by mass spectrometric RNA analysis.

Mechanistic Details of Glutathione Biosynthesis Revealed by Crystal Structures of Saccharomyces cerevisiae Glutamate Cysteine Ligase

Glutathione is a thiol-disulfide exchange peptide critical for buffering oxidative or chemical stress, and an essential cofactor in several biosynthesis and detoxification pathways. The rate-limiting step in its de novo biosynthesis is catalyzed by glutamate cysteine ligase, a broadly expressed enzyme for which limited structural information is available in higher eukaryotic species. Structural data are critical to the understanding of clinical glutathione deficiency, as well as rational design of enzyme modulators that could impact human disease progression. Here, we have determined the structures of Saccharomyces cerevisiae glutamate cysteine ligase (ScGCL) in the presence of glutamate and MgCl(2) (2.1 A; R = 18.2%, R(free) = 21.9%), and in complex with glutamate, MgCl(2), and ADP (2.7 A; R = 19.0%, R(free) = 24.2%). Inspection of these structures reveals an unusual binding pocket for the alpha-carboxylate of the glutamate substrate and an ATP-independent Mg(2+) coordination site, clarifying the Mg(2+) dependence of the enzymatic reaction. The ScGCL structures were further used to generate a credible homology model of the catalytic subunit of human glutamate cysteine ligase (hGCLC). Examination of the hGCLC model suggests that post-translational modifications of cysteine residues may be involved in the regulation of enzymatic activity, and elucidates the molecular basis of glutathione deficiency associated with patient hGCLC mutations.

Techniques and tactics used in determining the structure of the trimeric ebolavirus glycoprotein.

The trimeric membrane-anchored ebolavirus envelope glycoprotein (GP) is responsible for viral attachment, fusion and entry. Knowledge of its structure is important both for understanding ebolavirus entry and for the development of medical interventions. Crystal structures of viral glycoproteins, especially those in their metastable prefusion oligomeric states, can be difficult to achieve given the challenges in production, purification, crystallization and diffraction that are inherent in the heavily glycosylated flexible nature of these types of proteins. The crystal structure of ebolavirus GP in its trimeric prefusion conformation in complex with a human antibody derived from a survivor of the 1995 Kikwit outbreak has now been determined [Lee et al. (2008), Nature (London), 454, 177-182]. Here, the techniques, tactics and strategies used to overcome a series of technical roadblocks in crystallization and phasing are described. Glycoproteins were produced in human embryonic kidney 293T cells, which allowed rapid screening of constructs and expression of protein in milligram quantities. Complexes of GP with an antibody fragment (Fab) promoted crystallization and a series of deglycosylation strategies, including sugar mutants, enzymatic deglycosylation, insect-cell expression and glycan anabolic pathway inhibitors, were attempted to improve the weakly diffracting glycoprotein crystals. The signal-to-noise ratio of the search model for molecular replacement was improved by determining the structure of the uncomplexed Fab. Phase combination with Fab model phases and a selenium anomalous signal, followed by NCS-averaged density modification, resulted in a clear interpretable electron-density map. Model building was assisted by the use of B-value-sharpened electron-density maps and the proper sequence register was confirmed by building alternate sequences using N-linked glycan sites as anchors and secondary-structural predictions.