Internal Cavity Research Articles

A taxonomic monograph of the Eurasian holoparasitic plant genus Lathraea L. (Orobanchaceae)

A taxonomic monograph is presented for Lathraea L. (Orobanchaceae), a genus of holoparasitic plants distributed across Europe and Asia. Plants in this genus are characterised by their underground stems, achlorophyllous scales with internal gland-lined cavities, and, in some species, explosive seed dehiscence. Despite their conspicuousness, no taxonomic treatment of the genus has been written since 1930. Our work draws upon extensive international field data and a comprehensive survey of herbarium specimens. Detailed descriptions are provided for each species, along with full synonymy, distribution maps, and notes on habitat, host specificity, phenology, ecology, ethnobotany and threat risk. We present evidence to consolidate Lathraea into five species, resolving taxonomic confusion. The infrageneric classification is reviewed and a key to species is provided. Species are illustrated with photographs of living and dried material.

Cell-Inspired Microreactor with Compartmentalized Active Sites for Development of Cascade Catalysis System in Biosensing.

Enzymatic cascade reactions with high activity and specificity in living cells always benefit from multicompartmentalized organelles that provide separately confined spaces for enzymes, avoiding their mutual interference to ensure the high-efficiency operation of necessary vital movements. Inspired by this, we designed a 3D spherical microreactor (Au@H-APF@Pt) with biomimetic cascade catalysis for glucose detection. First, ultrasmall gold nanoparticles were immobilized in situ on the internal cavities of hollow 3-aminophenol formaldehyde resin (H-APF) nanospheres, along with glucose oxidase activity. Then, platinum nanoparticles (PtNPs) with peroxide-like activity were reduced surrounding the outer layer of the H-APF nanospheres. Similar to the cell structure, different metal sites in this bifunctional microreactor operated independently, bringing higher catalytic activity and selectivity and thus being synergistically capable of a cascade reaction to catalyze the substrate for glucose detection. This cell-mimicking microreactor (Au@H-APF@Pt) was successfully applied in glucose colorimetric detection, showing a 1.9-fold activity enhancement compared to direct mixing (Au/Pt). The observed low catalytic activity was attributed to the extended time for transferring hydrogen peroxide (H2O2) from Au NPs to the solution and then to PtNPs. Integrating a smartphone APP, a real-time, visual, and Au@H-APF@Pt-based hydrogel sensor for glucose detection was also proposed. Satisfactory results highlight that this cell-mimicking microreactor offers a very successful strategy to improve the efficiency of cascade catalysis systems in biosensing.

Organic Ink Multi-Material 3D Printing of Sustainable Soft Systems.

Drawing inspiration from nature, soft materials are at the core of a transformation toward adaptive and responsive engineered systems, capable of conquering demanding terrain and safe when interacting with biological life. Despite recent advances in 3D printing of soft materials, researchers are still far from being able to print complex soft systems where a multitude of different components need to work together symbiotically. Closing this gap necessitates a platform that unites diverse materials into one synergetic process. Here, a multi-material printing system is presented, combining gelatin-based hydrogels with a new biodegradable support material. This organic ink maintains up to 60° overhang and is printable over gaps to structurally support the main biogel body, while triggered dissolution enables its selective removal and the formation of internal cavities. Therefore, the creation of vascular networks, tunable scaffolds, and embedded sensors within a single printing process becomes feasible. Furthermore, a perforation-resistant, joint-like vacuum actuator (VAc) is designed and 3D printed, capable of bending to angles up to 60° at fast response times down to 0.23 s. Combining these approaches in an efficient, streamlined fabrication process with biodegradable materials will unlock new sustainability dimensions for complex and durable soft systems.

Research on controllable processing technology of microsphere cavity inside silicon substrates utilizing thermoelectric coupling effect

Micro cavity structures are extensively utilized in semiconductor micro- and nanosensor devices, especially spherical microcavity, whose high Q value not only significantly improves the sensitivity of the sensors, but also enhances their reliability in complex environments. The integration of this structure not only optimizes the performance of the sensor, but also provides the possibility for high-precision detection. In this study, a thermoelectric coupling method for controllable migration of microsphere cavity inside silicon materials is proposed in order to achieve stable formation of the internal microsphere cavity structure. The directional migration mechanism of atoms on the surface of microsphere cavities in silicon substrates under an electric field is explored using a phase field model. The model indicates that changes in the total free energy density induce a solid-gas phase transition on the surface of the microsphere cavity. It is shown that the migration velocity of the microsphere cavity increases proportionally with the electric field strength, and the migration distance increases by approximately 9% for every 10% increase in electric field strength. The migration direction aligns with the direction of the electric field. Simulation results validate the theoretical accuracy, the feasibility of controllable migration by thermoelectric coupling effect in conductive materials through experimental studies. This study provides novel methods and insights for fabricating high-quality spherical cavity in silicon materials and preparing highly sensitive micro- and nanosensor devices.

Gating residues govern ligand unbinding kinetics from the buried cavity in HIF-2α PAS-B.

While transcription factors have been generally perceived as "undruggable," an exception is the HIF-2 hypoxia-inducible transcription factor, which contains an internal cavity that is sufficiently large to accommodate a range of small-molecules, including the therapeutically used inhibitor belzutifan. Given the relatively long ligand residence times of these small molecules and the lack of any experimentally observed pathway connecting the cavity to solvent, there has been great interest in understanding how these drug ligands exit the buried receptor cavity. Here, we focus on the relevant PAS-B domain of hypoxia-inducible factor 2α (HIF-2α) and examine how one such small molecule (THS-017) exits from the buried cavity within this domain on the seconds-timescale using atomistic simulations and ZZ-exchange NMR. To enable the simulations, we applied the weighted ensemble path sampling strategy, which generates continuous pathways for a rare-event process [e.g., ligand (un)binding] with rigorous kinetics in orders of magnitude less computing time compared to conventional simulations. Results reveal the formation of an encounter complex intermediate and two distinct classes of pathways for ligand exit. Based on these pathways, we identified two pairs of conformational gating residues in the receptor: one for the major class (N288 and S304) and another for the minor class (L272 and M309). ZZ-exchange NMR validated the kinetic importance of N288 for ligand unbinding. Our results provide an ideal simulation dataset for rational manipulation of ligand unbinding kinetics.

Electrochemical Sacrificial Alchemy: Crafting Hollow Hydroxide Hierarchy for Practical Aqueous Energy Storage Solution

AbstractEffective utilization of internal active sites in high‐mass loading electrode materials is essential for advancing practical energy storage. Herein, a novel electrochemical sacrificial alchemy for the first time to directly transform the solid Co‐Ni‐Zn carbonate hydroxide (CH) into its hollow structure with a strategic hierarchical architecture is introduced. In contrast to the complex and often cumbersome procedures of traditional methods, the approach is built on the simple electrochemically induced in situ etching and remodeling process. The experimental and theoretical analyses highlight the significant role of electric field force‐induced Zn sacrificial etching and hydroxide redeposition in creating internal cavities and regenerating external active sites, leading to the final hollow hierarchical structure with primary 1D hollow nanorod arrays and secondary reconstructed 2D nanoflakes, effectively exposing abundant energy storage sites. Benefiting from the synergistic effect, the resulting Co‐Ni‐Zn CH exhibited exceptional electrochemical performance. As proof of concept, a modular pouch‐type hybrid supercapacitor (HSC) composed of Co‐Ni‐Zn CH cathode achieved an ultrahigh energy density of 46.9 Wh kg−1. This device can efficiently power consumer electronics with a faster charging speed compared to commercial shared power banks. This research unveils a facile electrochemical approach for structuring electrode materials in energy storage solutions.

Micro/Meso‐Porous Double‐Shell Hollow Carbon Spheres through Spatially Confined Pyrolysis for Supercapacitors and Zinc‐Ion Capacitor

AbstractEnergy storage in supercapacitors and hybrid zinc ion capacitors (ZIC) using porous carbon materials offers a promising alternative method for clean energy solutions. The unique combination of hierarchical porous structure and nitrogen doping in these materials has demonstrated significant capacity for energy storage. Nevertheless, the full potential of these materials, particularly the relationship between pore structure configuration and performance, remains underexplored. Herein, a confined pyrolysis strategy based on the polymerization characteristics of polydopamine (PDA) was developed to construction of hollow carbon spheres with microporous/mesoporous dual shell structure. The depth of micropores and cavity can be controlled by adjusting the duration of heat treatment and hydrothermal treatment, in accordance with the decomposition and polymerization characteristics of PDA. Due to the elasticity of this structure, the relationship between the micro/mesoporous depth of the prepared carbon spheres and the energy storage performance in supercapacitors and ZIC is established. Through optimizing the ion transport capacity of carbon spheres and considering the influence of its internal cavity structure on energy storage, the resulting carbon spheres exhibit high specific capacitance of 389 F g−1 in supercapacitor and specific capacitance of 260 F g−1 and excellent stability with 99.3 % retention after 30000 chare/discharge cycles in ZIC.

Fatigue Crack Segmentation and Characterization of Additively Manufactured Ti‐6Al‐4V Using X‐Ray Computed Tomography

ABSTRACTX‐ray computed tomography (XCT) is extremely useful for the non‐destructive analysis of additively manufactured (AM) components. AM components often show manufacturing defects such as lack‐of‐fusion (LoF), which are detrimental to the fatigue life of components. To better understand how cracks initiate and propagate from internal defects, we fabricated Ti‐6Al‐4V samples with an internal cavity using electron beam powder bed fusion. The samples were tested in high‐cycle and very high‐cycle fatigue regimes. XCT was used to locate crack initiation sites and to determine characteristic properties of cracks and defects with the aid of deep learning segmentation. LoF defects exposed to the outer surface of the samples after machining were found to be as detrimental to fatigue life as the internal artificial defects. This work can benefit industries that utilize the AM of high‐strength, lightweight alloys, in the design and manufacturing of components to improve part reliability and fatigue life.

Novel Porous Starch Granules Fabricated Using Controlled Lipase-Amylase Treatments: Application as Delivery Systems and Resistant Starches.

Porous starch granules (PSGs) are promising biomaterials for the encapsulation, protection, and delivery of bioactive ingredients. In this study, a lipase treatment was first used to generate pores in native starch granules, and then α-amylase was used to enlarge these pores. Electron and fluorescence microscopy analysis showed that the lipase treatment exposed the starch molecules located below the lipid-rich regions on the starch granule surfaces, which increased the swelling of the granules in aqueous solutions. Moreover, lipase treatment caused the surrounding areas to become more loosely packed, which facilitated subsequent starch hydrolysis and the formation of large internal cavities. Fourier transform infrared spectroscopy, X-ray diffraction, and thermogravimetric analyses provided further insights, these methods showed that the short-range order, long-range order, and thermal stability of the PSGs was enhanced by the sequential lipase-amylase modification. PSGs were highly resistant to amylase digestion and had strong adsorption capacity to hydrophobic and hydrophilic substances. This study shows that a combined lipase-amylase treatment can be used to fabricate PSGs, which may have health benefits due to their low digestibility and ability to encapsulate bioactive agents. These PSGs may therefore be suitable for application in the functional food, supplement, personal care, and pharmaceutical industries.

A Pneumatic Fingerless Soft Gripper for Envelope Gripping

In grasping operations, when facing unstructured environments, the use of soft-body grippers can be a good solution to the problem of grasping objects that are inconvenient to grasp due to their fragility and irregularity. However, as the soft-body gripper is composed of soft-body material, there are problems such as insufficient gripping power. The envelope-gripping method using a fingerless structure of the soft gripper has high gripping capacity. In this paper, a new type of pneumatic, soft-body, fingerless gripper (SFLG) is proposed based on envelope-type grasping. With its rigid connectors, it forms a soft-body gripper. By changing the air pressure and structure of the internal air cavity of the fingerless gripper, the degree of deformation can be controlled to achieve grasping of the object by the soft-body gripper. Experiments show that the soft-body gripper can grasp objects of different shapes and sizes. The SFLG can grasp objects up to 6 times higher than itself, and the soft gripper of this size can grasp objects up to 13 times heavier than itself. A pneumatic, fingerless, soft gripper has been designed to grasp small and heavy or tall objects in contrast to other fingerless soft grippers.

Acute middle cerebral artery occlusion due to a small internal carotid aneurysm cavity with blood stagnation: illustrative case.

In cerebral large vessel occlusion, even when an aneurysm is close to the target vessel, if the aneurysm is relatively small and angiography shows no thrombus within the aneurysm, it is difficult to identify the aneurysm as the embolic source. A 67-year-old man with a history of two left-sided cerebral infarctions developed a small left-sided cerebral infarction. On hospital day 3, he developed a left M2 occlusion and underwent thrombectomy with retraction of a stent retriever into an aspiration catheter at the proximal end of the thrombus. A red thrombus was retrieved, and M2 recanalization was successfully achieved. Angiography revealed a large partially thrombotic aneurysm with a small cavity with blood stagnation in the left cervical internal carotid artery, which was considered the embolic source. Stent-assisted coil embolization was performed on the aneurysm, and no recurrent cerebral infarction was observed after embolization. In cerebral large vessel occlusion, an aneurysm cavity with blood stagnation may be the embolic source. Using an aspiration catheter alone or retracting a stent retriever into an aspiration catheter could be a useful technique and help to avoid interference between the aneurysm and the stent retriever. https://thejns.org/doi/10.3171/CASE24406.

Endonasal Thermal Imaging Before and After Nasal Airway Surgery.

Nasal airway surgery is often applied when treatment fails to relieve nasal obstruction. However, surgery that improves airflow does not always alleviate the symptoms of nasal obstruction. The perception of nasal breathing is likely more related to changes in mucosal temperature than the mechanical sensation of flow or pressure. This study aims to measure intranasal mucosal temperature pre-and post-surgery using endonasal thermal imaging, exploring its correlation with subjective nasal breathing and objective airflow measurements. A prospective study of adult patients with nasal obstruction managed with nasal airway surgery was performed. Intranasal mucosal temperatures were determined using the thermal endonasal image of the nasal passage produced by the infrared radiometric thermal camera (FILR VS290). A comparison was made between the mean values of mid-expiration (ExT) and mid-inspiration (InT) temperature data (internal nasal valve, nasal cavity, inferior turbinate, and overall airway [mean value]) and visual analog scale (VAS), Nasal Obstruction Symptom Evaluation (NOSE) scale and nasal airway resistance (NAR) before and after surgery. Seven patients (35.14 ± 16.45 years, 57.14% female) were included. All NOSE, VAS, and NAR improved after surgery (59.29 ± 10.89 vs 17.14 ± 14.64; P < .001, 64.50 ± 26.79 vs 18.57 ± 19.99; P < .001, 0.82 ± 0.48 vs 0.34 ± 0.11 Pa/cm3/s; P = .002, respectively). ExT, InT, and the difference between ExT and InT of three areas and overall airway were similar between pre-and post-surgery. No statistically significant correlations were found between intranasal mucosal temperature, VAS, NOSE, and NAR at pre-and post-surgery except for the difference between ExT and InT of overall airway and NOSE pre-operative (Pearson r = 0.57; 95% CI 0.06-1.09; P = .03). Endonasal thermal imaging can assess the intranasal mucosal temperature of a patient. However, more precise imaging of the nasal passages and data acquisition are required to establish mucosal temperature as an objective measure of nasal obstruction before and after nasal airway surgery in a clinical setting.

Experimental investigation on heat transfer characteristics and thermal optimization methods of the storage-type downhole visual tool

The storage-type downhole visual tool is a crucial device for monitoring the technical condition of the downhole tubing string. However, prolonged exposure to the high-temperature downhole environment leads to an increase in the internal temperature of the tool, causing instability in the operation of electronic devices. To address this issue, a thermal optimization scheme for the tool’s internal cavity has been proposed, combining a distributed lens structure with vacuum phase-change composite materials. An environmental-tool heat transfer model has been established to study the temperature rise characteristics during the entry stage (ES) and the operation stage (OS). Comparative analysis shows that this optimization scheme can effectively reduce the internal cavity temperature by 32.5 °C, a decrease of 41.7 %, during the entry stage. During the operation stage, the heat absorption by the composite phase-change material results in a 6.3 °C drop in the internal cavity temperature and a 30.1 °C reduction in the circuit board temperature. The model was validated through the high-temperature oil bath experiment, with the calculation results showing errors below 8 % compared to experimental results. Implementing this thermal optimization scheme in case wells ensures the tool’s continuous and stable operation for 6 h, with the internal cavity temperature maintained below 100 °C and the circuit board temperature kept within 140 °C. This significantly enhances the safety and stability of downhole electronic devices and provides guidance for the selection of temperature control strategies for downhole tools in high-temperature environments.

Medicaments removal with different techniques from internal resorption cavities

Medicaments removal with different techniques from internal resorption cavities

Hydrodynamic performance on cavity resonant type floating breakwater for long waves

Abstract The current work investigates a cavity resonant-type floating breakwater (FB). Therefore, the Helmholtz resonator principle was adopted to reduce the intensity of long-period waves effectively. The configuration of the internal cavity was optimized to resonate with the fluid inside the cavity, thereby dissipating wave energy. Five models with different gap distances (GDs) were analyzed. Various experiments compared the traditional box-type floating breakwater performance with modified floating breakwater models. The experiments were focused on evaluating the transmission coefficient of stationary models under various wave heights and periods. According to the results, the optimized wave attenuation mechanism can effectively overcome the technical defects of the conventional floating breakwater, which limits its application for long-period wave attenuation. Meanwhile, it is found that for a given principal size, the proposed floating breakwater exhibits a 20%-30% smaller transmission coefficient relative to the traditional box-type FB in medium and long-period waves.

Synthesis and spectroscopic studies of triazole-based macroheterocycles containing eudesmane-type sesquiterpenoid moieties

Chiral recognition is one of the most important and fascinating areas in supramolecular chemistry. Chiral macrocycles, especially chiral macrocyclic hosts, having stable structures, adjustable internal cavities to encapsulate and complexation have been developed during the last decade. Attention has been paid on the synthesis of covalently linked of rigid units on the side chain of macrocycles with active binding motifs. In this study, new synthetic protocols has been developed for preparation of optically active triazole-based macrocyclic compounds in which eudesmane-type sesquiterpene lactones act as pendent moieties by the implementation of the copper(I)-catalyzed azid-alkyne cycloaddition strategies. The described protocols provided mild reaction conditions, high yields and high atom- and step-economy. New macrocycles with hanging dihydroisoalantolactone units, different combinations of heteroatoms, and ring sizes in the range of 16–36 atoms were characterized by NMR and UV–vis spectroscopy and mass spectrometry analysis. The molecular structures and intermolecular interactions of two new macrocyclic compounds were elucidated using single-crystal X-ray crystallography. Upon addition of Mg(II) or Zn(II) cations to these novel ligands, using titration experiments we observed the formation of 1:1 (16:Mg2+) complexes and 1:1 to 2:1 (16:Zn2+) complexes, respectively, according to stoichiometry. The result suggests that dihydriisoalantolactone and triazole units within the molecules formed complexes with Mg (II) and Zn (II) ions in solution.

Исследование изменения геометрии внутренней полости передающих устройств для гидроструйных технологий с целью улучшения их теплового состояния

The paper is devoted to the study of the influence on changes in their thermal balance during operation by improving the cooling conditions of sections of the drill shaft with contact surfaces of changes in geometric characteristics, such as diameter and length, of the internal cavity for supplying working fluid in high-pressure hydro-puller device for hydro-jet technologies. The axisymmetric simulation not on a full-size transmit-ting device was carried out, but on one-eighth part in order to reduce the time of both creating the model itself and the amount of calculations. A model created in the computing environment «Ansys» with a computational grid for calculating equivalent stresses is shown. The stress distributions calculated by the finite element method for various combinations of the geometry of the transfer device revealed the corresponding boundaries for the rational change in the diameter and length of the internal cavity, allowing to ensure its operability of the structural unit in combination with maximum cooling of the most thermally loaded sections of the shaft. Dimensionless geometric parameters (reduced diameter and reduced length of the internal cavity) are introduced for a general description of the geometry of transmitting devices for hydro-jet technologies. Graphs of the dependences of voltage values on the given values were obtained.

A turn-on fluorescent aptasensor for Pb2+ detection based on rhodamine B dye leakage from the internal cavity of hollow gold nanoparticles

In this project, a sensitive fluorescent aptasensor was fabricated to detect lead ions (Pb2+) by applying hollow gold nanoparticles (HGNPs) as a nano-carrier and rhodamine B (RDB) fluorescent dye as the signal agent. In the aptasensor that was created, the specific attachment of the aptamers to Pb2+ ions led to the release of aptamer from the chitosan (CTS) coated-HGNPs loaded with RDB, causing an increase in fluorescence intensity due to the leakage of RDB. The method demonstrated specific detection of the target analyte, achieving a detection limit (LOD) of 1 ppb and a broad linear dynamic range spanning from 2 to 1000 ppb. The aptasensor was able to accurately measure the concentration of Pb2+ in human serum, low-fat milk, and mineral water samples. The suggested biosensor, which offers the benefits of simplicity, user-friendliness, affordability, and high sensitivity, is well-suited for use with complex samples such as environmental and clinical samples.

Hollow Gold-Silver Nanorods-A New, Very Efficient Nanomaterial for Surface-Enhanced Raman Scattering (SERS) Measurements.

Anisotropic plasmonic nanoparticles usually generate SERS enhancement factors that are significantly larger than those generated by spherical plasmonic nanostructures, so the former are usually preferred as substrates for SERS measurements. Gold nanorods are one of the most commonly used anisotropic nanomaterials for SERS experiments. Unfortunately, even a slight contamination of the surfactant used in the process of the synthesis of gold nanorods has a significant impact on the geometry of the resulting nanostructures. In this work, using easily formed silver nanorods as templates, hollow AuAg nanorods are formed by means of a silver-gold galvanic exchange reaction (in this process, nanostructures with a cavity inside form because one gold atom replaces three silver atoms). Hollow AuAg nanorods are highly active during SERS measurements-for shorter wavelengths of the excitation radiation, they display greater SERS activity than Au nanorods. To our knowledge, this is the first example of the use of hollow plasmonic nanorods for SERS measurements. Elemental mapping of the rods showed that the silver, some of which remained after the galvanic replacement, is mainly located close to the internal cavity that was formed, whereas the gold is mainly located at the outermost regions of the nanostructure. This explains the high chemical stability of these nanostructures.

Composite Polycaprolactone/Gelatin Nanofiber Membrane Scaffolds for Mesothelial Cell Culture and Delivery in Mesothelium Repair.

To repair damaged mesothelium tissue, which lines internal organs and cavities, a tissue engineering approach with mesothelial cells seeded to a functional nanostructured scaffold is a promising approach. Therefore, this study explored the uses of electrospun nanofiber membrane scaffolds (NMSs) as scaffolds for mesothelial cell culture and transplantation. We fabricated a composite NMS through electrospinning by blending polycaprolactone (PCL) with gelatin. The addition of gelatin enhanced the membrane's hydrophilicity while maintaining its mechanical strength and promoted cell attachment. The in vitro study demonstrated enhanced adhesion of mesothelial cells to the scaffold with improved morphology and increased phenotypic expression of key marker proteins calretinin and E-cadherin in PCL/gelatin compared to pure PCL NMSs. In vivo studies in rats revealed that only cell-seeded PCL/gelatin NMS constructs fostered mesothelial healing. Implantation of these constructs leads to the regeneration of new mesothelium tissue. The neo-mesothelium is similar to native mesothelium from hematoxylin and eosin (H&E) and immunohistochemical staining. Taken together, the PCL/gelatin NMSs can be a promising scaffold for mesothelial cell attachment, proliferation, and differentiation, and the cell/scaffold construct can be used in therapeutic applications to reconstruct a mesothelium layer.