Intermolecular Research Articles

EXPERIMENTAL AND THEORETICAL INTERPRETATIONS OF STRUCTURAL, OPTICAL, MECHANICAL AND THERMAL PROPERTIES OF 2 AMINOPYRIDINIUM PHTHALATE SINGLE CRYSTALS

Nonlinear optical good quality single crystals of 2-aminopyridinium phthalate single crystals are synthesized by solution growth technique. Structural parameters are elucidated by Single Crystal X-ray diffraction method which reveals that the material crystallizes in non-centrosymmetric crystalline framework. Vibrational assignments are interpreted by Fourier Transform Infrared spectral analysis. The thermal, mechanical and laser stability are explored by TG/DTA, microhardness and Laser Damage threshold analysis. The material has good emission nature in the violet emission region. The linear optical properties are elucidated with the help of UV-visible spectral analysis. The intermolecular charge transfer interactions are analyzed by HOMO-LUMO and MESP maps by using Gaussian ’09 software program. The second harmonic generation efficiency of the synthesized material are predicted by Kurtz Perry powder technique.

Yolk-shell microspheres perovskite Gd/Fe oxides with rich oxygen vacancies for ultra-sensitive properties in acetone detection

Acetone as a toxic and hazardous gas is widely appeared in life. In this paper, p-type Gd/Fe oxide yolk-shell microspheres were prepared by a one-step hydrothermal method. Characterization and test results shows that perovskite Gd/Fe oxides with yolk-shell microspheres possess abundant oxygen vacancies, which presents excellent acetone gas-sensitive performance. Among the obtained sensor, the optimal operating temperature of the S-4 (Gd0.77/Fe) sensor is reduced to 200 ℃, and the response value (S = 20) to 100 ppm acetone is improved by 5 times (compare to S-1). The lowest detection limit can be as low as 0.5 ppm, furthermore the sensor presents resist-humidity. Electron paramagnetic resonance (EPR) and x-ray photoelectron spectroscopy (XPS) results reveal that the ratio of Gd/Fe has a strong correlation with the content of oxygen vacancies. The rich oxygen vacancies control theory is the main reason for improving gas sensing performance in this work. The presence of oxygen vacancies effectively increases the active sites and further promotes intermolecular interactions. Overall, the sensor S-4 (Gd0.77/Fe) has an important potential in the detection of acetone in human breath with high response and low detection limit under high humidity environment.

A novel dynamic simulation method for investigating the hygroscopicity of Ammonium perchlorate

Ammonium perchlorate (AP) is a widely used oxidizer, extensively employed in solid propellants with excellent combustion properties. Ultrafine AP has better combustion properties, but its strong hygroscopicity and high sensitivity hinder its application. To safely and efficiently explore the hygroscopicity of ultrafine AP, this paper proposes a novel molecular dynamics (MD) simulation approach. By analyzing the movement of water molecules, fluctuations in average hydrogen bond strength, and the influence of non-covalent intermolecular forces throughout the moisture absorption process, this study presents a comprehensive overview of the hygroscopic properties of ultrafine AP across relative humidity (RH) levels spanning from 10 % to 100 %, and temperatures ranging between 273 K and 373 K. It was found that temperature has a more significant impact on the hygroscopicity of AP compared to RH. During the hygroscopic process of AP, Van der Waals interactions hindered the water absorption of AP, while electrostatic forces promoted its hygroscopic properties. The hygroscopicity of AP reached a maximum when the temperature exceeded 333 K, and plateaued as the increase of RH. The proposed moisture simulation method facilitates the secure and effective forecasting of moisture absorption in AP-based materials across various temperature and RH environments, thereby greatly expediting research on enhancing the moisture resistance of ultrafine AP.

Transparent, flexible, and eco-friendly starch-based films for reversible optoelectronic noses for food spoilage monitoring in smart packaging.

Areversible optoelectronic nose is presentedconsisting of ten acid-base indicators incorporated into a starch-based film, covering a wide pHrange. The starch substrate is odorless, biocompatible, flexible, and exhibits high tensile resistance. This optical artificial olfaction system was used to detect the early stages of food decomposition by exposing it to the volatile compounds produced during the spoialge process of three food products (beef, chicken, and pork).A smartphone was used to capture the color changes caused by intermolecular interactions between each dye and the emitted volatiles over time. Digital images were processed to generate a differential color map, which uses the observed color shifts to create a unique signature for each food product. To effectively discriminate among different samples and exposure times, we employed chemometric tools, including hierarchical cluster analysis (HCA) and principal component analysis (PCA). This approach detects food deterioration in a practical, cost-effective, and user-friendly manner, making it suitable for smart packaging. Additionally, the use of starch-based films in the food industry is preferable due to their biocompatibility and biodegradability characteristics.

Highly Efficient and Stable Organic Solar Cells Enabled by a Commercialized Simple Thieno[3,2-b]thiophene Additive.

Delicately manipulating nanomorphology is recognized as a vital and effective approach to enhancing the performance and stability of organic solar cells (OSCs). However, the complete removal of solvent additives with high boiling points is typically necessary to maintain the operational stability of the device. In this study, two commercially available organic intermediates, namely thieno[3,2-b]thiophene (TT) and 3,6-dibromothieno[3,2-b]thiophene (TTB) are introduced, as solid additives in OSCs. The theoretical simulations and experimental results indicate that TT and TTB may exhibit stronger intermolecular interactions with the acceptor Y6 and donor PM6, respectively. This suggests that the solid additives (SAs)can selectively intercalate between Y6 and PM6 molecules, thereby improving the packing order and crystallinity. As a result, the TT-treated PM6:Y6 system exhibits a favorable morphology, improved charge carrier mobility, and minimal charge recombination loss. These characteristics contribute to an impressive efficiency of 17.75%. Furthermore, the system demonstrates exceptional thermal stability (T80>2800h at 65°C) and outstanding photostability. The universal applicability of TT treatment is confirmed in OSCs employing D18:L8-BO, achieving a significantly higher PCE of 18.3%. These findings underscore the importance of using appropriate solid additives to optimize the blend morphology of OSCs, thereby improving photovoltaic performance and thermal stability.

Different Drug Mobilities in Hydrophobic Cavities of Host–Guest Complexes between β-Cyclodextrin and 5-Fluorouracil at Different Stoichiometries: A Molecular Dynamics Study in Water

Cyclodextrins (CDs) are cyclic oligosaccharides able to form noncovalent water-soluble complexes useful in many different applications for the solubilization, delivery, and greater bioavailability of hydrophobic drugs. The complexation of 5-fluorouracil (5-FU) with natural or synthetic cyclodextrins permits the solubilization of this poorly soluble anticancer drug. In this theoretical work, the complexes between β-CD and 5-FU are investigated using molecular mechanics (MM) and molecular dynamics (MD) simulations in water. The inclusion complexes are formed thanks to the favorable intermolecular interactions between β-CD and 5-FU. Both 1:1 and 1:2 β-CD/5-FU stoichiometries are investigated, providing insight into their interaction geometries and stability over time in water. In the 1:2 β-CD/5-FU complexes, the intermolecular interactions affect the drug’s mobility, suggesting a two-step release mechanism: a fast release for the more exposed and hydrated drug molecule, with greater freedom of movement near the β-CD rims, and a slow one for the less-hydrated and well-encapsulated and confined drug. MD simulations study the intermolecular interactions between drugs and specific carriers at the atomistic level, suggesting a possible release mechanism and highlighting the role of the impact of the drug concentration on the kinetics process in water. A comparison with experimental data in the literature provides further insights.

Revealing the Effect of Stereocontrol on Intermolecular Interactions between Abiotic, Sequence-Defined Polyurethanes and a Ligand.

The development of precision polymer synthesis has facilitated access to a diverse library of abiotic structures wherein chiral monomers are positioned at specific locations within macromolecular chains. These structures are anticipated to exhibit folding characteristics similar to those of biotic macromolecules and possess comparable functionalities. However, the extensive sequence space and numerous variables make selecting a sequence with the desired function challenging. Therefore, revealing sequence-function dependencies and developing practical tools are necessary to analyze their conformations and molecular interactions. In this study, we investigate the effect of stereochemistry, which dictates the spatial location of backbone and pendant groups, on the interaction between sequence-defined oligourethanes and bisphenol A ligands. Various methods are explored to analyze the receptor-like properties of model oligomers and the ligand. The accuracy of molecular dynamics simulations and experimental techniques is assessed to uncover the impact of discrete changes in stereochemical arrangements on the structures of the resulting complexes and their binding strengths. Detailed computational investigations providing atomistic details show that the formed complexes demonstrate significant structural diversity depending on the sequence of stereocenters, thus affecting the oligomer-ligand binding strength. Among the tested techniques, the fluorescence spectroscopy data, fitted to the Stern-Volmer equation, are consistently aligned with the calculations, thus validating the developed simulation methodology. The developed methodology opens a way to engineer the structure of sequence-defined oligomers with receptor-like functionality to explore their practical applications, e.g., as sensory materials.

Enhanced Stability and Solidification of Volatile Eugenol by Cyclodextrin-Metal Organic Framework for Nasal Powder Delivery.

Eugenol (Eug) holds potential as a treatment for bacterial rhinosinusitis by nasal powder drug delivery. To stabilization and solidification of volatile Eug, herein, nasal inhalable γ-cyclodextrin metal-organic framework (γ-CD-MOF) was investigated as a carrier by gas-solid adsorption method. The results showed that the particle size of Eug loaded by γ-CD-MOF (Eug@γ-CD-MOF) distributed in the range of 10-150μm well. In comparison to γ-CD and β-CD-MOF, γ-CD-MOF has higher thermal stability to Eug. And the intermolecular interactions between Eug and the carriers were verified by characterizations and molecular docking. Based on the bionic human nasal cavity model, Eug@γ-CD-MOF had a high deposition distribution (90.07 ± 1.58%). Compared with free Eug, the retention time Eug@γ-CD-MOF in the nasal cavity was prolonged from 5min to 60min. In addition, the cell viability showed that Eug@γ-CD-MOF (Eug content range 3.125-200µg/mL) was non-cytotoxic. And the encapsulation of γ-CD-MOF could not reduce the bacteriostatic effect of Eug. Therefore, the biocompatible γ-CD-MOF could be a potential and valuable carrier for nasal drug delivery to realize solidification and nasal therapeutic effects of volatile oils.

Adhesive Zwitterionic Poly(ionic liquid) with unprecedented Organic Solvent Resistance.

The resistance of adhesives to organic solvents is of paramount importance in diverse industries. Unfortunately, many currently available adhesives exhibit either weak intermolecular chain interactions, resulting in insufficient resistance to organic solvents, or possess a permanent covalent crosslinked network, impeding recyclability. This study introduces an innovative approach to address this challenge by formulating zwitterionic poly(ionic liquid) (ZPIL) derivatives with robust dipole-dipole interactions, incorporating sulfonic anions and imidazolium cations. Due to its unique dynamic and electrostatic self-crosslinking structure, the ZPIL exhibits significant adhesion to various substrates and demonstrates excellent recyclability even after multiple adhesion tests. Significantly, ZPIL exhibits exceptional adhesion stability across diverse non-polar and polar organic solvents, including ionic liquids, distinguishing itself from non-ionic polymers and conventional poly(ionic liquid)s. Its adhesive performance remains minimally affected even after prolonged exposure to soaking conditions. The study presents a promising solution for the design of highly organic solvent-resistant materials for plastics, coatings, and adhesives. This article is protected by copyright. All rights reserved.

Identification of a functional missense variant in the matrix metallopeptidase 10 (MMP10) gene in two families with premature myocardial infarction

A positive family history is a major independent risk factor for atherosclerosis, and genetic variation is an important aspect of cardiovascular disease research. We identified a heterozygous missense variant p.L245P in the MMP10 gene in two families with premature myocardial infarction using whole-exome sequencing. The aim of this study was to investigate the consequences of this variant using in-silico and functional in-vitro assays. Molecular dynamics simulations were used to analyze protein interactions, calculate free binding energy, and measure the volume of the substrate-binding cleft of MMP10-TIMP1 models. The p.L245P variant showed an altered protein surface, different intra- and intermolecular interactions of MMP10-TIMP1, a lower total free binding energy between MMP10-TIMP1, and a volume-minimized substrate-binding cleft of MMP10 compared to the wild-type. For the functional assays, human THP-1 cells were transfected with plasmids containing MMP10 cDNA carrying the p.L245P and wild-type variant and differentiated into macrophages. Macrophage adhesion and migration assays were then conducted, and pro-inflammatory chemokine levels were evaluated. The p.L245P variant led to macrophages that were more adherent, less migratory, and secreted higher levels of the pro-inflammatory chemokines CXCL1 and CXCL8 than wild-type macrophages. Thus, the p.L245P variant in MMP10 may influence the pathogenesis of atherosclerosis in families with premature myocardial infarction by altering protein - protein interactions, macrophage adhesion and migration, and expression of pro-inflammatory chemokines, which may increase plaque rupture. These results could contribute to the development of selective MMP10 inhibitors and reduce the risk of atherosclerosis in families with a history of premature myocardial infarction.

Regulation of Peptide Liquid-Liquid Phase Separation by Aromatic Amino Acid Composition.

Membraneless organelles are cellular biomolecular condensates that are formed by liquid-liquid phase separation (LLPS) of proteins and nucleic acids. LLPS is driven by multiple weak attractive forces, including intermolecular interactions mediated by aromatic amino acids. Considering the contribution of π-electron bearing side chains to protein-RNA LLPS, systematically study sought to how the composition of aromatic amino acids affects the formation of heterotypic condensates and their physical properties. For this, a library of minimalistic peptide building blocks is designed containing varying number and compositions of aromatic amino acids. It is shown that the number of aromatics in the peptide sequence affect LLPS propensity, material properties and (bio)chemical stability of peptide/RNA heterotypic condensates. The findings shed light on the contribution of aromatics' composition to the formation of heterotypic condensates. These insights can be applied for regulation of condensate material properties and improvement of their (bio)chemical stability, for various biomedical and biotechnological applications.

Enhanced Fill Factor and Efficiency of Ternary Organic Solar Cells by a New Asymmetric Non-Fullerene Small Molecule Acceptor.

Asymmetric non-fullerene small molecules acceptor (as-NF-SMAs) exhibit greater vitality in photovoltaic materials compared to their symmetric counterparts due to their larger dipole moments and stronger intermolecular interactions, which facilitate exciton dissociation and charge transmission in organic solar cells (OSCs). Here, we introduced a new as-NF-SMAs, named IDT-TNIC, as the third component in ternary organic solar cells (TOSCs). The asymmetric IDT-TNIC used indacenodithiophene (IDT) as the central core, alkylthio-thiophene as a unilateral π-bridge and extended end groups as electron-withdrawing. Due to the non-covalent conformational lock (NCL) established between O···S and S···S, the IDT-TNIC molecule preserves its coplanar structure effectively. Furthermore, IDT-TNIC exhibits complementary absorption and excellent compatibility with donor and acceptor materials, as well as optimized ladder energy level arrangement, resulting in a higher and more balanced μh/μe value, more homogeneous and suitable phase separation morphology in TOSCs. Thus, the PCE of the TOSCs reached 17% when the weight ratio of PM6:Y6:IDT-TNIC was 1:1.1:0.1, and it is noteworthy that when the device area was increased to 1 cm2, the PCE could still be maintained at over 14%. Detailed studies and analysis indicate that IDT-TNIC has great potential as a third component in OSCs and for large-scale printing in the future.

Dispersion-driven cooperativity in alkyl perylenediimide oligomers: insights from densityfunctional theory.

The cooperative mechanism is of paramount importance in the synthesis of supramolecular polymers with desired characteristics, including molecular mass, polydispersity, and morphology. It is primarily driven by the presence of intermolecular interactions, which encompass strong hydrogen bonding, metal-ligand interactions, and dipole-dipole interactions. In this study, we utilize density functional theory and energy decomposition analysis to investigate the cooperative behavior of perylene diimide (PDI) oligomers with alkyl chains at their imide positions, which lack the previously mentioned interactions. Our systematic examination reveals that dispersion interactions originating from the alkyl side-chain substituents play an important role in promoting cooperativity within these PDIs. This influence becomes even more pronounced for alkyl chain lengths beyond hexyl groups. The energy decomposition analysis reveals that the delicate balance between dispersion energy and Pauli repulsion energy is the key driver of cooperative behavior in PDIs. Additionally, we have developed a mathematical model capable of predicting the saturated binding energies for PDI oligomers of varying sizes and alkyl chain lengths. Overall, our findings emphasize the previously undervalued significance of dispersion forces in cooperative supramolecular polymerization, enhancing our overall understanding of the cooperative mechanism.

How Does Mg2+(aq) Interact with ATP(aq)? Biomolecular Structure through the Lens of Liquid-Jet Photoemission Spectroscopy.

Liquid-jet photoemission spectroscopy (LJ-PES) allows for a direct probing of electronic structure in aqueous solutions. We show the applicability of the approach to biomolecules in a complex environment, exploring site-specific information on the interaction of adenosine triphosphate in the aqueous phase (ATP(aq)) with magnesium (Mg2+(aq)), highlighting the synergy brought about by the simultaneous analysis of different regions in the photoelectron spectrum. In particular, we demonstrate intermolecular Coulombic decay (ICD) spectroscopy as a new and powerful addition to the arsenal of techniques for biomolecular structure investigation. We apply LJ-PES assisted by electronic-structure calculations to study ATP(aq) solutions with and without dissolved Mg2+. Valence photoelectron data reveal spectral changes in the phosphate and adenine features of ATP(aq) due to interactions with the divalent cation. Chemical shifts in Mg 2p, Mg 2s, P 2p, and P 2s core-level spectra as a function of the Mg2+/ATP concentration ratio are correlated to the formation of [Mg(ATP) 2]6-(aq), [MgATP]2-(aq), and [Mg2ATP](aq) complexes, demonstrating the element sensitivity of the technique to Mg2+-phosphate interactions. The most direct probe of the intermolecular interactions between ATP(aq) and Mg2+(aq) is delivered by the emerging ICD electrons following ionization of Mg 1s electrons. ICD spectra are shown to sensitively probe ligand exchange in the Mg2+-ATP(aq) coordination environment. In addition, we report and compare P 2s data from ATP(aq) and adenosine mono- and diphosphate (AMP(aq) and ADP(aq), respectively) solutions, probing the electronic structure of the phosphate chain and the local environment of individual phosphate units in ATP(aq). Our results provide a comprehensive view of the electronic structure of ATP(aq) and Mg2+-ATP(aq) complexes relevant to phosphorylation and dephosphorylation reactions that are central to bioenergetics in living organisms.

Highly selective and sensitive fluorescent probes for nitrofurazone and Hg2+ by two Zn (II)‐based coordination polymers

The self‐assembly of the π‐conjugated 1,4‐di(1H‐imidazol‐1‐yl)benzene (dib) and 4,4′‐di(1H‐imidazol‐1‐yl)‐1,1′‐biphenyl (dibp) ligands together with 4′‐(3,4‐ dicarboxylphenyloxy)‐4‐biphenylcarboxylic acid (H3L) reacts with metal Zn (II) salts to construct two new coordination polymers (CPs), namely [Zn (dib)(HL)(H2O)] (1) and [Zn (dibp)(HL)] (2). Fluorescence measurements reveal that 1 and 2 could display a highly sensitive fluorescence response toward Hg2+ and nitrofurazone (NFZ). Fluorescence investigations suggest that 1 and 2 are promising multi‐responsive sensing materials for detecting Hg2+ and NFZ through fluorescence quenching (turn‐off). The limits of detection toward Hg2+ ions are 0.221 μM and 0.124 μM, while the limits of detection toward NFZ are 0.757 μM and 0.960 for 1 and 2, respectively. Interestingly, these Hg2+ and NFZ selective sensing processes can even be completed by the reusable CPs detected by the naked eyes. Hirshfeld surfaces and fingerprint plots are extensively used to investigate intermolecular interactions, which play a crucial role in creating diverse supramolecular designs that can be compared.

Theoretical Study of Maxwell-Stefan Binary Diffusion Coefficients of n-alkanes-N2 at High Densities

ABSTRACT In this study, the Maxwell-Stefan binary diffusion coefficients ( D ij ) of C1-C6 n-alkanes-N2 are calculated using the Green-Kubo formula. The ratio of p ij at different pressures (from 1 to 1000 bar) to that at 1 atm (reference condition) is studied. It is found that the ratio p ij / p ij ref first decreases and then increases with increasing density, finally reaching 1.3 for n-C6H14-N2 at 1000 bar, 600 K. The gradual increase in molecular attraction at the beginning of the density increase results in a slower pressure increase compared to that of an ideal gas, contributing to the decreasing trend of p ij / p ij ref . As the density continues to increase, the enhanced molecular repulsion and the molecular volume exclusion effect accelerate the pressure increase beyond that of an ideal gas, leading to an increasing trend in p ij / p ij ref . Finally, the results obtained by the Green-Kubo method are compared with those obtained from empirical methods, and an equation for the refinement of D ij is formulated.

Exfoliatable Layered 2D Honeycomb Crystals of Host-guest Complexes Networked by CH-π Hydrogen Bonds.

Studies of graphene show that robust chemical bonds such as covalent bonds with trigonal-planar atoms afford layered atomic 2D crystals possessing unique properties. Although layered molecular crystals are of interest to diversify elements and structures of 2D materials, the structural diversity of molecules as well as weak intermolecular interactions inevitably makes the design to be one-off and individual. We herein report a versatile method to assemble layered molecular crystals. By developing a D3-symmetry host at vertices to form a honeycomb layer, a diverse range of layered 2D host-guest crystals were obtained. Substituents on the host, elements/structures of the guest, stereochemistries of the host and types of intercalants were diversified, which should allow for 6×32×3×2 combinations for structural diversification.

Functions of tensile and compressive strain on electronic and optical properties of B-doped monolayer arsenene.

The structurals stability, electronic structure, density of states (DOS), and optical properties of B-doped arsenene under biaxial tensile and compressive strains were investigated using density functional theory (DFT) calculations. The doping system was found to exhibit good stability. The introduction of B atom transformed the originally indirect band gap of arsenene into a direct band gap. Under compressive strain, the band gap remained direct, gradually decreasing in value. In contrast, under tensile strain, the direct band gap occurred a transition into an indirect band gap, of which value initially increasing and then decreasing with an increasing strain. The static dielectric constant was increased under both compressive and tensile strains, but compressive strain had a stronger effect. Compressive strain led to an increase in the imaginary peak of the dielectric function, while tensile strain resulted in a decrease. Moreover, as compressive strain increased, the absorption and loss function peak initially blue-shifted and then red-shifted, while tensile strain caused a gradual red-shift of the absorption peak. All DFT calculations were performed using Quantum Espresso software; the structures were optimized using generalized gradient approximation (GGA-PBE), and electronic structure and optical properties are performed using Heyd-Sceria-Ernzerhof (HSE06). The cut-off energy was set as 70 Ry, the Monkhorst-Pack grid was set to 10 × 10 × 1, the atomic convergence criterion was set as 1.0 × 10-6 Ry, and the convergence criterion of interatomic force was set as 1.0 × 10-4 Ry/Bohr.

Modulation of Intermolecular Interactions in Organic Emitters for Highly Efficient Organic Light-Emitting Diodes.

The adverse aggregated-caused quenching (ACQ) problem of most electroluminescent materials existing in highly doped thin films is one of the key factors impeding the commercialization ofhigh-efficiency organic light-emitting diodes (OLEDs) panel. Whereas, by delicately constructing and modulating moderate intermolecular interactions, some aggregates have been demonstrated to present distinct luminescent properties such as tunable emission spectra, improved photoluminescence quantum yields, different emission mechanism and enhanced horizontal transition dipole ratio (Θ) of emitting layer, providing feasible solution for ACQ problem. The luminescence from newly generated emissive state in aggregates is different from the traditional "isolated" molecules in organic electronics and will possess novel properties and applications. Herein, we summarize the different types of intermolecular interactions within emitter aggregates exhibiting distinct luminescent mechanisms, as well as their effects on photoluminescent and electroluminescent properties, offering reliable reference for the advancementof highly efficient OLEDs utilizing aggregated emitters.

Neuronal glutathione depletion elevates the Aβ42/Aβ40 ratio and tau aggregation in Alzheimer's disease mice.

Alzheimer's disease (AD) involves reduced glutathione levels, causing oxidative stress and contributing to neuronal cell death. Our prior research identified diminished glutamate-cysteine ligase catalytic subunit (GCLC) as linked to cell death. However, the effect of GCLC on AD features such as amyloid and tau pathology remained unclear. To address this, we investigated amyloid pathology and tau pathology in mice by combining neuron-specific conditional GCLC knockout mice with amyloid precursor protein (App) knockin (KI) or microtubule-associated protein tau (MAPT) KI mice. Intriguingly, GCLC knockout resulted in an increased Aβ42/40 ratio. Additionally, GCLC deficiency in MAPT KI mice accelerated the oligomerization of tau through intermolecular disulfide bonds. These findings suggest that the decline in glutathione levels, due to aging or AD pathology, may contribute to the progression of AD.