Interferometric Rayleigh Scattering Research Articles

Turbulence Analysis From Long-Exposure-Time Acquisitions With Interferometric Rayleigh Scattering

This study focuses on the analysis of long-exposure-time interferograms obtained with an Interferometric Rayleigh Scattering (IRS) set-up pointing at a high subsonic isothermal jet flow. The objectives are twofold: retrieve from seeding-free optical measurements the mean characteristics of this flow - in particular the mean velocity profile in the jet shear-layer - and determine higher order statistics for the flow velocity in the shear layer. The results are compared to those obtained on the same test bench by use of hot wire anemometry, and conclusions about the relevancy of the approach together with potential improvements are deduced therefrom.

Multi-beam interferometric Rayleigh scattering technique for simultaneous 2-D quantitative measurement of multi-parameters in high speed flow field

In order to diagnose the high-speed compressible turbulent flow field, a two-dimensional (2-D) multi-parameters measurement method based on multi-beam interferometric Rayleigh scattering (IRS) technique was proposed. Under the beam splitting of etalon, the Rayleigh scattering signals generated by the interaction between multi-beam laser probes and the flow field gas molecules formed 2-D interference measurement lattice. Each measurement point contained the thermodynamic and velocity information of the flow field corresponding to a specific spatial location. By calibrating the effective finesse and transmittance of the etalon at different incident angles, the measurement accuracy of temperature and density of high-order interferometric points was improved. A 2-D IRS measurement system was established by combining multi-beam laser probes, amplification imaging system and solid quartz etalon. A high speed jet was used to verify the technology. The distributions of temperature, density and velocity at different positions along the radial direction and axial direction of the nozzle were obtained. The results shown that the technique could be used to simultaneously measure the 2-D multi-parameter information of the flow field.

100-kHz Interferometric Rayleigh Scattering for multi-parameter flow measurements.

Simultaneous multi-point multi-parameter flow measurement using Interferometric Rayleigh scattering (IRS) at 100-kHz repetition rate is demonstrated. Using a burst-mode laser and an un-intensified high-speed camera, interferograms are obtained that contain spatial, temporal and scattered light frequency information. The method of analysis of these interferograms to obtain simultaneous multi-point flow velocity and temperature measurements is described. These methods are demonstrated in a 100-kHz-rate study of a choked, under-expanded jet flow discharged by a convergent nozzle. Measurement results and uncertainties are discussed. The 100-kHz IRS technique with un-intensified imaging is applicable in large-scale wind tunnels for the study of unsteady and turbulent flows.

High-repetition-rate interferometric Rayleigh scattering for flow-velocity measurements.

High-repetition-rate interferometric-Rayleigh-scattering (IRS) velocimetry is implemented and demonstrated for non-intrusive, high-speed flow-velocity measurements. High temporal resolution is obtained with a quasi-continuous burst-mode laser that is capable of providing bursts of 10-msec duration with pulse widths of 10-100 nsec, pulse energy > 100 mJ at 532 nm, and repetition rates of 10-100 kHz. Coupled with a high-speed camera system, the IRS method is based on imaging the flow field though an etalon with 8-GHz free spectral range and capturing the Doppler shift of the Rayleigh-scattered light from the flow at multiple points having constructive interference. The seed-laser linewidth permits delivery of a laser linewidth of < 150 MHz at 532 nm The technique is demonstrated in a high-speed jet, and high-repetition-rate image sequences are shown.