Interdimer Contacts Research Articles

Assessing nanobody interaction with SARS-CoV-2 Nsp9.

The interaction between SARS-CoV-2 non-structural protein Nsp9 and the nanobody 2NSP90 was investigated by NMR spectroscopy using the paramagnetic perturbation methodology PENELOP (Paramagnetic Equilibrium vs Nonequilibrium magnetization Enhancement or LOss Perturbation). The Nsp9 monomer is an essential component of the replication and transcription complex (RTC) that reproduces the viral gRNA for subsequent propagation. Therefore preventing Nsp9 recruitment in RTC would represent an efficient antiviral strategy that could be applied to different coronaviruses, given the Nsp9 relative invariance. The NMR results were consistent with a previous characterization suggesting a 4:4 Nsp9-to-nanobody stoichiometry with the occurrence of two epitope pairs on each of the Nsp9 units that establish the inter-dimer contacts of Nsp9 tetramer. The oligomerization state of Nsp9 was also analyzed by molecular dynamics simulations and both dimers and tetramers resulted plausible. A different distribution of the mapped epitopes on the tetramer surface with respect to the former 4:4 complex could also be possible, as well as different stoichiometries of the Nsp9-nanobody assemblies such as the 2:2 stoichiometry suggested by the recent crystal structure of the Nsp9 complex with 2NSP23 (PDB ID: 8dqu), a nanobody exhibiting essentially the same affinity as 2NSP90. The experimental NMR evidence, however, ruled out the occurrence in liquid state of the relevant Nsp9 conformational change observed in the same crystal structure.

Filament structure and subcellular organization of the bacterial intermediate filament–like protein crescentin

The protein crescentin is required for the crescent shape of the freshwater bacterium Caulobacter crescentus (vibrioides). Crescentin forms a filamentous structure on the inner, concave side of the curved cells. It shares features with eukaryotic intermediate filament (IF) proteins, including the formation of static filaments based on long and parallel coiled coils, the protein's length, structural roles in cell and organelle shape determination and the presence of a coiled coil discontinuity called the "stutter." Here, we have used electron cryomicroscopy (cryo-EM) to determine the structure of the full-length protein and its filament, exploiting a crescentin-specific nanobody. The filament is formed by two strands, related by twofold symmetry, that each consist of two dimers, resulting in an octameric assembly. Crescentin subunits form longitudinal contacts head-to-head and tail-to-tail, making the entire filament non-polar. Using in vivo site-directed cysteine cross-linking, we demonstrated that contacts observed in the in vitro filament structure exist in cells. Electron cryotomography (cryo-ET) of cells expressing crescentin showed filaments on the concave side of the curved cells, close to the inner membrane, where they form a band. When comparing with current models of IF proteins and their filaments, which are also built from parallel coiled coil dimers and lack overall polarity, it emerges that IF proteins form head-to-tail longitudinal contacts in contrast to crescentin and hence several inter-dimer contacts in IFs have no equivalents in crescentin filaments. Our work supports the idea that intermediate filament-like proteins achieve their shared polymerization and mechanical properties through a variety of filament architectures.

Molecular interactions underlying the phase separation of HP1α: role of phosphorylation, ligandand nucleic acid binding.

Heterochromatin protein 1α (HP1α) is a crucial element of chromatin organization. It has been proposed that HP1α functions through liquid-liquid phase separation (LLPS), which allows it to compact chromatin into transcriptionally repressed heterochromatin regions. In vitro, HP1α can undergo phase separation upon phosphorylation of its N-terminus extension (NTE) and/or through interactions with DNA and chromatin. Here, we combine computational and experimental approaches to elucidate the molecular interactions that drive these processes. In phosphorylation-driven LLPS, HP1α can exchange intradimer hinge-NTE interactions with interdimer contacts, which also leads to a structural change from a compacted to an extended HP1α dimer conformation. This process can be enhanced by the presence of positively charged HP1α peptide ligands and disrupted by the addition of negatively charged or neutral peptides. In DNA-driven LLPS, both positively and negatively charged peptide ligands can perturb phase separation. Our findings demonstrate the importance of electrostatic interactions in HP1α LLPS where binding partners can modulate the overall charge of the droplets and screen or enhance hinge region interactions through specific and non-specific effects. Our study illuminates the complex molecular framework that can fine-tune the properties of HP1α and that can contribute to heterochromatin regulation and function.

The crystal structure of yeast regulatory subunit reveals key evolutionary insights into Protein Kinase A oligomerization

Protein Kinase A (PKA) is a widespread enzyme that plays a key role in many signaling pathways from lower eukaryotes to metazoans. In mammals, the regulatory (R) subunits sequester and target the catalytic (C) subunits to proper subcellular locations. This targeting is accomplished by the dimerization and docking (D/D) domain of the R subunits. The activation of the holoenzyme depends on the binding of the second messenger cAMP. The only available structures of the D/D domain proceed from mammalian sources. Unlike dimeric mammalian counterparts, the R subunit from Saccharomyces cerevisiae (Bcy1) forms tetramers in solution. Here we describe the first high-resolution structure of a non-mammalian D/D domain. The tetramer in the crystals of the Bcy1 D/D domain is a dimer of dimers that retain the classical D/D domain fold. By using phylogenetic and structural analyses combined with site-directed mutagenesis, we found that fungal R subunits present an insertion of a single amino acid at the D/D domain that shifts the position of a downstream, conserved arginine. This residue participates in intra-dimer interactions in mammalian D/D domains, while due to this insertion it is involved in inter-dimer contacts in Bcy1, which are crucial for the stability of the tetramer. This surprising finding challenges well-established concepts regarding the oligomeric state within the PKAR protein family and provides important insights into the yet unexplored structural diversity of the D/D domains and the molecular determinants of R subunit oligomerization.

Tubulin mutations in neurodevelopmental disorders as a tool to decipher microtubule function.

Malformations of cortical development (MCDs) are a group of severe brain malformations associated with intellectual disability and refractory childhood epilepsy. Human missense heterozygous mutations in the 9 α-tubulin and 10 β-tubulin isoforms forming the heterodimers that assemble into microtubules (MTs) were found to cause MCDs. However, how a single mutated residue in a given tubulin isoform can perturb the entire microtubule population in a neuronal cell remains a crucial question. Here, we examined 85 MCD-associated tubulin mutations occurring in TUBA1A, TUBB2, and TUBB3 and their location in a three-dimensional (3D) microtubule cylinder. Mutations hitting residues exposed on the outer microtubule surface are likely to alter microtubule association with partners, while alteration of intradimer contacts may impair dimer stability and straightness. Other types of mutations are predicted to alter interdimer and lateral contacts, which are responsible for microtubule cohesion, rigidity, and dynamics. MCD-associated tubulin mutations surprisingly fall into all categories, thus providing unexpected insights into how a single mutation may impair microtubule function and elicit dominant effects in neurons.

The role of tubulin-tubulin lattice contacts in the mechanism of microtubule dynamic instability.

Microtubules form from longitudinally and laterally assembling tubulin α/β-dimers. The assembly induces strain in tubulin, resulting in cycles of microtubule catastrophe and regrowth. This so-called dynamic instability is governed by GTP hydrolysis that renders the microtubule lattice unstable, but it is unclear how. We used the human microtubule nucleating and stabilising neuronal protein doublecortin and high-resolution cryo-EM to capture tubulin’s elusive hydrolysis intermediate GDP.Pi state, alongside the pre-hydrolysis analogue GMPCPP state, and the post-hydrolysis GDP state with and without an anti-cancer drug Taxol®. GTP hydrolysis to GDP.Pi, followed by Pi release, constitute distinct structural transitions, causing unevenly distributed compressions of tubulin dimers, thereby tightening longitudinal and loosening lateral inter-dimer contacts. We conclude that microtubule catastrophe is triggered because the lateral contacts can no longer counteract the strain energy stored in the lattice, while reinforcement of the longitudinal contacts may support generation of force.

Electrostatics Facilitates the Trimer-of-Dimers Formation of the Chemoreceptor Signaling Domain

Chemoreceptors are crucial components of the bacterial sensory system that modulates cellular motility. They detect changes in the environment and transmit information to CheA histidine kinase, which ultimately controls cellular flagellar motors. The prototypical Tsr chemoreceptor in E. coli is a homodimer containing two principle functional modules: (i) a periplasmic ligand-binding domain and (ii) a cytoplasmic signaling domain comprising an antiparallel, four-helix coiled-coil bundle. Receptor dimers are arranged into a trimer-of-dimers, which is a minimal physical unit essential for enhancing the CheA activity several hundredfold. Recent advances in cryo-electron tomography showed that trimers-of-dimers are arranged into highly ordered hexagon arrays at the cell pole; however, the mechanism underlying the trimer-of-dimer and higher order array formation remains unknown. Current evidence from structural and biochemical studies suggest that trimers-of-dimers are maintained exclusively by contacts at the chemoreceptor cytoplasmic tip. Here, using all-atom, microsecond-range MD simulation of the Tsr trimer-of-dimers crystal structure, we show that dimers within the trimer may interact throughout the entire length of the signaling domain. While inter-dimer contacts at the chemoreceptor tip occur via hydrophobic interactions, complete dimer “zipping” is facilitated by electrostatics, especially by the polar solvation component. We also show that many of the residues involved in establishing hydrogen bonds and salt bridges between dimers are evolutionary conserved.

Crystal Structure of the Maturation Protein from Bacteriophage Qβ

Virions of the single-stranded RNA bacteriophages contain a single copy of the maturation protein, which is bound to the phage genome and is required for the infectivity of the particles. The maturation protein mediates the adsorption of the virion to bacterial pili and the subsequent release and penetration of the genome into the host cell. Here, we report a crystal structure of the maturation protein from bacteriophage Qβ. The protein has a bent, highly asymmetric shape and spans 110Å in length. Apart from small local substructures, the overall fold of the maturation protein does not resemble that of other known proteins. The protein is organized in two distinct regions, an α-helical part with a four-helix core, and a β stranded part that contains a seven-stranded sheet in the central part and a five-stranded sheet at the tip of the protein. The Qβ maturation protein has two distinct, positively charged areas at opposite sides of the α-helical part, which are involved in genomic RNA binding. The maturation protein binds to each of the surrounding coat protein dimers in the capsid differently, and the interaction is considerably weaker compared to coat protein interdimer contacts. The coat protein- or RNA-binding residues are not preserved among different ssRNA phage maturation proteins; instead, the distal end of the α-helical part is the most evolutionarily conserved, suggesting the importance of this region for maintaining the functionality of the protein.

Deformability of Microtubules: An Atomistic Computational Study

Thanks to their material properties, microtubules can play complex variety of biological functions. Experimental studies have shown that mechanical characteristics of microtubules are length-dependent and anisotropic, however, the origin of this feature has not been traced down to the level of tubulin sequence yet. Here we use high-resolution elastic network model to show local deformations patterns in microtubule structure up to the level of individual amino acid residues. The mechanical strain within the molecular structure of a microtubule is, according to our results, localized to interdimer contacts with energetic preference of deformation in longitudinal contacts. These findings are in agreement with reported mechanical anisotropy of microtubules, i.e. higher Young's modulus in axial direction compared to radial direction. Our results contribute to understanding the origin of deformability of microtubules on the molecular level, which is important for prospective targeting of microtubules in medical therapeutic strategies.

Quaternary structure of Dioclea grandiflora lectin assessed by equilibrium sedimentation and crystallographic analysis of recombinant mutants

The structural basis of the pH dependency of the dimer–tetramer transition exhibited by Brinda’s type II Diocleinae lectins was investigated by equilibrium sedimentation and X-ray crystal structure determination of recombinant wild-type and site-directed single and double mutants of the pH-stable tetrameric Dioclea grandiflora lectin (r-αDGL). Releasing the peripheral site interdimeric contact between R60 and D78 rendered a mutant displaying dimer–tetramer equilibrium in the pH range equivalent to pKa±1 of the γ-COOH. Mutation of both histidines 51 and 131, but not the mutation of each His separately, abolished the formation of the Diocleinae canonical tetramer in the pH range 2.5–8.5. The X-ray structure of the double mutant r-αDGL H51G/H131N suggests that H131 plays a crucial role in networking loop 114–125 residues from all four subunits at the central cavity of the tetrameric lectin, and that H51 maintains the central cavity loops in a proper spatial orientation to make H131-mediated interdimer contacts.

Structural basis for drug resistance conferred by β-tubulin mutations: a molecular modeling study on native and mutated tubulin complexes with epothilone B

Using molecular modeling, we have investigated the structure and dynamic properties of epothilone B–tubulin complexes with wild-type and mutated tubulin, aimed at identifying the molecular factors involved in the emergence of drug resistance induced by four protein mutations at Phe270Val, Thr274Ile, Arg282Gln, and Gln292Glu. Our results revealed that tubulin mutations render significant changes in the protein conformation in regions involved either in the binding of the ligand or in interdimer contacts that are relevant to the assembly of stable microtubules. In addition, point mutations induce drastic changes in the binding pose of the ligand and in the interaction networks responsible for the epothilone–tubulin association. Large ligand displacements inside the binding pocket and an overall decrease in the strength of drug-receptor polar contacts suggest a looser binding of the ligand in tubulin mutants. These results explain the loss of activity for epothilone B against cancer cells that contain tubulin mutants and provide valuable information to enhance the understanding of the atomic source of epothilones’ activity, which can be helpful to conduct further research on the rational design of more potent therapeutic tubulin-binding agents.

Assessment of differences in the conformational flexibility of hepatitis B virus core‐antigen and e‐antigen by hydrogen deuterium exchange‐mass spectrometry

Hepatitis B virus core-antigen (capsid protein) and e-antigen (an immune regulator) have almost complete sequence identity, yet the dimeric proteins (termed Cp149d and Cp(-10)149d , respectively) adopt quite distinct quaternary structures. Here we use hydrogen deuterium exchange-mass spectrometry (HDX-MS) to study their structural properties. We detect many regions that differ substantially in their HDX dynamics. Significantly, whilst all regions in Cp(-10)149d exchange by EX2-type kinetics, a number of regions in Cp149d were shown to exhibit a mixture of EX2- and EX1-type kinetics, hinting at conformational heterogeneity in these regions. Comparison of the HDX of the free Cp149d with that in assembled capsids (Cp149c ) indicated increased resistance to exchange at the C-terminus where the inter-dimer contacts occur. Furthermore, evidence of mixed exchange kinetics were not observed in Cp149c , implying a reduction in flexibility upon capsid formation. Cp(-10)149d undergoes a drastic structural change when the intermolecular disulphide bridge is reduced, adopting a Cp149d -like structure, as evidenced by the detected HDX dynamics being more consistent with Cp149d in many, albeit not all, regions. These results demonstrate the highly dynamic nature of these similar proteins. To probe the effect of these structural differences on the resulting antigenicity, we investigated binding of the antibody fragment (Fab E1) that is known to bind a conformational epitope on the four-helix bundle. Whilst Fab E1 binds to Cp149c and Cp149d , it does not bind non-reduced and reduced Cp(-10)149d , despite unhindered access to the epitope. These results imply a remarkable sensitivity of this epitope to its structural context.

Structure and properties of G84R and L99M mutants of human small heat shock protein HspB1 correlating with motor neuropathy

Some properties of G84R and L99M mutants of HspB1 associated with peripheral distal neuropathies were investigated. Homooligomers formed by these mutants are larger than those of the wild type HspB1. Large oligomers of G84R and L99M mutants have compromised stability and tend to dissociate at low protein concentration. G84R and L99M mutations promote phosphorylation-dependent dissociation of HspB1 oligomers without affecting kinetics of HspB1 phosphorylation by MAPKAP2 kinase. Both mutants weakly interact with HspB6 forming small heterooligomers and being unable to form large heterooligomers characteristic for the wild type HspB1. G84R and L99M mutants possess lower chaperone-like activity than the wild type HspB1 with several model substrates. We suggest that G84R mutation affects mobility and accessibility of the N-terminal domain thus modifying interdimer contacts in HspB1 oligomers. The L99M mutation is located within the hydrophobic core of the α-crystallin domain close to the key R140 residue, and could affect the dimer stability.

The state of the guanosine nucleotide allosterically affects the interfaces of tubulin in protofilament

The dynamics of microtubules is essential for many microtubule-dependent cellular functions such as the mitosis. It has been recognized for a long time that GTP hydrolysis in αβ-tubulin polymers plays a critical role in this dynamics. However, the effects of the changes in the nature of the guanosine nucleotide at the E-site in β-tubulin on microtubule structure and stability are still not well understood. In the present work, we performed all-atom molecular dynamics simulations of a αβα-tubulin heterotrimer harboring a guanosine nucleotide in three different states at the E-site: GTP, GDP-Pi and GDP. We found that changes in the nucleotide state is associated with significant conformational variations at the α-tubulin N- and β-tubulin M-loops which impact the interactions between tubulin protofilaments. The results also show that GTP hydrolysis reduces αβ-tubulin interdimer contacts in favor of intradimer interface. From an atomistic point view, we propose a role for α-tubulin glutamate residue 254 in catalytic magnesium coordination and identified a water molecule in the nucleotide binding pocket which is most probably required for nucleotide hydrolysis. Finally, the results are discussed with reference to the role of taxol in microtubule stability and the recent tubulin-sT2R crystal structures.

Intrinsic Bending of Microtubule Protofilaments

The complex polymerization dynamics of the microtubule (MT) plus end are closely linked to the hydrolysis of the GTP nucleotide bound to the β-tubulin. The destabilization is thought to be associated with the conformational change of the tubulin dimers from the straight conformation in the MT lattice to a curved conformation. It remains under debate whether this transformation is directly related to the nucleotide state, or a consequence of the longitudinal or lateral contacts in the MT lattice. Here, we present large-scale atomistic simulations of short tubulin protofilaments with both nucleotide states, starting from both extreme conformations. Our simulations indicate that both interdimer and intradimer contacts in both GDP and GTP-bound tubulin dimers and protofilaments in solution bend. There are no observable differences between the mesoscopic properties of the contacts in GTP and GDP-bound tubulin or the intradime and interdimer interfaces.

Crystal Structure of the Nitrogenase-like Dark Operative Protochlorophyllide Oxidoreductase Catalytic Complex (ChlN/ChlB)2

During (bacterio)chlorophyll biosynthesis of many photosynthetically active organisms, dark operative protochlorophyllide oxidoreductase (DPOR) catalyzes the two-electron reduction of ring D of protochlorophyllide to form chlorophyllide. DPOR is composed of the subunits ChlL, ChlN, and ChlB. Homodimeric ChlL(2) bearing an intersubunit [4Fe-4S] cluster is an ATP-dependent reductase transferring single electrons to the heterotetrameric (ChlN/ChlB)(2) complex. The latter contains two intersubunit [4Fe-4S] clusters and two protochlorophyllide binding sites, respectively. Here we present the crystal structure of the catalytic (ChlN/ChlB)(2) complex of DPOR from the cyanobacterium Thermosynechococcus elongatus at a resolution of 2.4 A. Subunits ChlN and ChlB exhibit a related architecture of three subdomains each built around a central, parallel beta-sheet surrounded by alpha-helices. The (ChlN/ChlB)(2) crystal structure reveals a [4Fe-4S] cluster coordinated by an aspartate oxygen alongside three cysteine ligands. Two equivalent substrate binding sites enriched in aromatic residues for protochlorophyllide substrate binding are located at the interface of each ChlN/ChlB half-tetramer. The complete octameric (ChlN/ChlB)(2)(ChlL(2))(2) complex of DPOR was modeled based on the crystal structure and earlier functional studies. The electron transfer pathway via the various redox centers of DPOR to the substrate is proposed.

Distinct Pose of Discodermolide in Taxol Binding Pocket Drives a Complementary Mode of Microtubule Stabilization

The microtubule cytoskeleton has proven to be an effective target for cancer therapeutics. One class of drugs, known as microtubule stabilizing agents (MSAs), binds to microtubule polymers and stabilizes them against depolymerization. The prototype of this group of drugs, Taxol, is an effective chemotherapeutic agent used extensively in the treatment of human ovarian, breast, and lung carcinomas. Although electron crystallography and photoaffinity labeling experiments determined that the binding site for Taxol is in a hydrophobic pocket in beta-tubulin, little was known about the effects of this drug on the conformation of the entire microtubule. A recent study from our laboratory utilizing hydrogen-deuterium exchange (HDX) in concert with various mass spectrometry (MS) techniques has provided new information on the structure of microtubules upon Taxol binding. In the current study we apply this technique to determine the binding mode and the conformational effects on chicken erythrocyte tubulin (CET) of another MSA, discodermolide, whose synthetic analogues may have potential use in the clinic. We confirmed that, like Taxol, discodermolide binds to the taxane binding pocket in beta-tubulin. However, as opposed to Taxol, which has major interactions with the M-loop, discodermolide orients itself away from this loop and toward the N-terminal H1-S2 loop. Additionally, discodermolide stabilizes microtubules mainly via its effects on interdimer contacts, specifically on the alpha-tubulin side, and to a lesser extent on interprotofilament contacts between adjacent beta-tubulin subunits. Also, our results indicate complementary stabilizing effects of Taxol and discodermolide on the microtubules, which may explain the synergy observed between the two drugs in vivo.

Antiferromagnetic interactions through phenoxo bridges and lattice water: Synthesis, structure, and magnetic properties of new Mn(III) Schiff base complexes in combination with thiocyanate ligand

The Schiff base ligands, N,N′-bis(2-hydroxyacetophenone)-1,2-diaminoethane (acphenH 2) and N,N′-bis(2-hydroxyacetophenone)-1,3-diaminopropane (acphpnH 2), prepared in situ were used to synthesise two new Mn(III) complexes which were characterised by crystallography and variable temperature magnetic measurements. [Mn(acphen)NCS] 2 is a phenoxo-bridged dimeric compound with the thiocyanate coordinating in the usual bent mode (Mn–N–C angle, 152°) and is weakly antiferromagnetic. Since there are no significant inter-dimer contacts in the crystal, the low temperature magnetic behaviour is influenced by single ion zero-field splitting. Exact diagonalisation of the spin Hamiltonian was performed to derive the following parameters: J = −0.7 cm −1, D = −0.6 cm −1. Mn(acphpn)(H 2O)NCS is monomeric with an unusual linearly coordinated thiocyanate (Mn–N–C angle, 178°). Two lattice water molecules link the Mn(III) complex molecules through hydrogen bonds to form one-dimensional chains in the crystal. Magnetic exchange along the chain makes this compound also weakly antiferromagnetic with J ∼ –2 cm −1.

Crystal structure and magnetic behavior of decamethylferrocenium bis(2-thioxo-1,3-dithiole-4,5-diselenolato)nickelate(III)

The synthesis, crystal structure and magnetic properties of the charge transfer salt [Fe(Cp ∗) 2][Ni(dsit) 2], dsit = (2-thioxo-1,3-dithiole-4,5-diselenolato) are described. The crystal structure consists of layers composed by parallel chains, where side-by-side pairs of cations, alternate with face-to-face pairs of anions, ⋯D +D +A −A −D +D +A −A −⋯. The acceptors in the AA pairs are strongly dimerized through a Ni–Se bond. Short interdimer contacts (Se–Se and S–S) give rise to a porous 3D network, and the [Fe(Cp ∗) 2] +pairs are located in the cavities of the acceptors network. The [Fe(Cp ∗) 2] + donors are relatively isolated leading to weak DA and DD interactions and the magnetic behavior of this compound can be basically described as the sum of two contributions: one from nearly independent donors, and the second from the acceptors network, with strong AA AFM coupling, both intradimer and between dimers in adjacent chains.

Crystal structures of Cratylia floribunda seed lectin at acidic and basic pHs. Insights into the structural basis of the pH-dependent dimer–tetramer transition

Structural determinants underlaying the pH-dependent dimer–tetramer transition of Diocleinae lectins were investigated from the structures of Cratylia floribunda seed lectin crystallized in conditions where it exist as a dimer (pH 4.6) or as a tetramer (pH 8.5). The acidic (aCFL) and the basic (bCFL) tetramers superimpose with overall r.m.s.d. of 0.53 Å, though interdimer contacts are drastically reduced in aCFL, and the r.m.s.d. for the superposition of the 117–120 loops of aCFL vs. the bCFL tetramer is 1.29 Å. Our data support the view that His51 plays a role in determining the conformation of the central cavity loops and that interdimer contacts involving ordered loop residues stabilize the canonical, pH-dependent tetramer. In the bCFL tetramer, hydrogen bonds between Asn118 and Thr120 of monomers A and D and residues Ser66, Ser108, Ser110, and Thr49 of the opposite monomer stabilize the canonical, pH-dependent tetrameric lectin structure. In CFL, Asn131 makes intradimer contacts with Asn122 and Ala123. In comparison, His131 in Dioclea grandiflora lectin establishes a network of interdimer interactions bridging the four central loops of the pH-independent tetramer. Our data provide new insights into the participation of specific amino acid residues in the mechanism of the quaternary association of Diocleinae lectins.