Intermolecular Domain Interactions Research Articles

Revealing a Mutant-Induced Receptor Allosteric Mechanism for the Thyroid Hormone Resistance.

SummaryResistance to thyroid hormone (RTH) is a clinical disorder without specific and effective therapeutic strategy, partly due to the lack of structural mechanisms for the defective ligand binding by mutated thyroid hormone receptors (THRs). We herein uncovered the prescription drug roxadustat as a novel THRβ-selective ligand with therapeutic potentials in treating RTH, thereby providing a small molecule tool enabling the first probe into the structural mechanisms of RTH. Despite a wide distribution of the receptor mutation sites, different THRβ mutants induce allosteric conformational modulation on the same His435 residue, which disrupts a critical hydrogen bond required for the binding of thyroid hormones. Interestingly, roxadustat retains hydrophobic interactions with THRβ via its unique phenyl extension, enabling the rescue of the activity of the THRβ mutants. Our study thus reveals a critical receptor allosterism mechanism for RTH by mutant THRβ, providing a new and viable therapeutic strategy for the treatment of RTH.

NMR Studies of the Phosphorylation of the Mengovirus Leader Protein Reveal Stabilization of Intermolecular Domain Interactions

NMR Studies of the Phosphorylation of the Mengovirus Leader Protein Reveal Stabilization of Intermolecular Domain Interactions

Quantifying stickiness: thermodynamic characterization of intramolecular domain interactions to guide the design of förster resonance energy transfer sensors.

The introduction of weak, hydrophobic interactions between fluorescent protein domains (FPs) can substantially increase the dynamic range (DR) of Förster resonance energy transfer (FRET)-based sensor systems. Here we report a comprehensive thermodynamic characterization of the stability of a range of self-associating FRET pairs. A new method is introduced that allows direct quantification of the stability of weak FP interactions by monitoring intramolecular complex formation as a function of urea concentration. The commonly used S208F mutation stabilized intramolecular FP complex formation by 2.0 kCal/mol when studied in an enhanced cyan FP (ECFP)-linker-enhanced yellow FP (EYFP) fusion protein, whereas a significantly weaker interaction was observed for the homologous Cerulean/Citrine FRET pair (ΔG0(o-c) = 0.62 kCal/mol). The latter effect could be attributed to two mutations in Cerulean (Y145A and H148D) that destabilize complex formation with Citrine. Systematic analysis of the contribution of residues 125 and 127 at the dimerization interface in mOrange.linker.mCherry fusion proteins yielded a toolbox of new mOrange-mCherry combinations that allowed tuning of their intramolecular interaction from very weak (ΔG0(o-c) = .0.39 kCal/mol) to relatively stable (ΔG0(o-c) = 2.2 kCal/mol). The effects of these mutations were also studied by monitoring homodimerization of mCherry variants using fluorescence anisotropy. These mutations affected intramolecular and intermolecular domain interactions similarly, although FP interactions were found to be stronger in the latter. The knowledge thus obtained allowed successful construction of a red-shifted variant of the bile acid FRET sensor BAS-1 by replacement of the self-associating Cerulean-Citrine pair by mOrange.mCherry variants with a similar intramolecular affinity. Our findings thus allow a better understanding of the subtle but important role of intramolecular domain interactions in current FRET sensors and help guide the construction of new sensors using modular design strategies.

Amino acid screening based on structural modeling identifies critical residues for the function, ion selectivity and structure of Arabidopsis MTP1

Arabidopsis thaliana MTP1 is a vacuolar membrane Zn(2+)/H(+) antiporter of the cation diffusion facilitator family. Here we present a structure-function analysis of AtMTP1-mediated transport and its remarkable Zn(2+) selectivity by functional complementation tests of more than 50 mutant variants in metal-sensitive yeast strains. This was combined with homology modeling of AtMTP1 based on the crystal structure of the Escherichia coli broad-specificity divalent cation transporter YiiP. The Zn(2+)-binding sites of EcYiiP in the cytoplasmic C-terminus, and the pore formed by transmembrane helices TM2 and TM5, are conserved in AtMTP1. Although absent in EcYiiP, Cys31 and Cys36 in the extended N-terminal cytosolic domain of AtMTP1 are necessary for complementation of a Zn-sensitive yeast strain. On the cytosolic side of the active Zn(2+)-binding site inside the transmembrane pore, Ala substitution of either Asn258 in TM5 or Ser101 in TM2 non-selectively enhanced the metal tolerance conferred by AtMTP1. Modeling predicts that these residues obstruct the movement of cytosolic Zn(2+) into the intra-membrane Zn(2+)-binding site of AtMTP1. A conformational change in the immediately preceding His-rich cytosolic loop may displace Asn258 and permit Zn(2+) entry into the pore. This would allow dynamic coupling of Zn(2+) transport to the His-rich loop, thus acting as selectivity filter or sensor of cytoplasmic Zn(2+) levels. Individual mutations at diverse sites within AtMTP1 conferred Co and Cd tolerance in yeast, and included deletions in N-terminal and His-rich intra-molecular cytosolic domains, and mutations of single residues flanking the transmembrane pore or participating in intra- or inter-molecular domain interactions, all of which are not conserved in the non-selective EcYiiP.

The Mechanism of the Formation of Nonadhesive Fibrinogen Matrices Examined by Atomic Force Microscopy

The plasma protein fibrinogen prevents adhesion of blood cells such as platelets and leukocytes to various surfaces, including fibrin gels. We have previously reported that the decrease in cell adhesion results from fibrinogen aggregation and the formation of an extensible multilayered matrix incapable of transducing strong mechanical forces through cellular integrins1,2. Here, using the various capabilities of Atomic Force Microscopy (AFM), we have examined the physical properties of matrices produced from human plasma fibrinogen (hFg) and two recombinant fibrinogens: recombinant normal fibrinogen (rFg) and fibrinogen with truncated αC domains (FgAα251). We have determined the thickness of matrices using AFM lithography, and also performed the high-resolution topographical visualization of single molecules within the matrices. With force spectroscopy, we have measured the extensibility, adhesion forces and the energy of AFM tip-fibrinogen matrix interactions. Our results indicate that hFg and rFg adsorbed at high concentrations form an extensible matrix containing 8-9 molecular layers. In contrast, FgAα251 forms only 2-3 molecular layers. These data indicate that the αC domains are critically involved in the formation of a fibrinogen multilayer. Furthermore, the inability of FgAα251 to form a thick multilayered matrix results in sustained cell adhesion, unlike hFg which completely prevents cell adhesion. To evaluate the contribution of the αC domains to the formation of multilayered matrices, we developed a model based on intermolecular domain interactions to simulate the adsorption process for hFg and FgAα251. These findings have implications for processes where deposition of fibrinogen occurs, such as thrombus formation and adsorption of fibrinogen on implanted biomaterials.1. Podolnikova, N. P. et al., Biochemistry, 49, 68-77 (2010).2. Yermolenko, I. S. et al., Langmuir, 26, 17269-17277 (2010).

Structure of Myxovirus Resistance Protein A Reveals Intra- and Intermolecular Domain Interactions Required for the Antiviral Function

Human myxovirus resistance protein 1 (MxA) is an interferon-induced dynamin-like GTPase that acts as a cell-autonomous host restriction factor against many viral pathogens including influenza viruses. To study the molecular principles of its antiviral activity, we determined the crystal structure of nucleotide-free MxA, which showed an extended three-domain architecture. The central bundle signaling element (BSE) connected the amino-terminal GTPase domain with the stalk via two hinge regions. MxA oligomerized in the crystal via the stalk and the BSE, which in turn interacted with the stalk of theneighboring monomer. We demonstrated that the intra- and intermolecular domain interplay between the BSE and stalk was essential for oligomerization and the antiviral function of MxA. Based on these results, we propose a structural model for the mechano-chemical coupling in ring-like MxA oligomers as the principle mechanism for this unique antiviral effector protein.

Intra- and intermolecular domain interactions among novel two-component system proteins coded by Rv0600c, Rv0601c and Rv0602c of Mycobacterium tuberculosis

Two-component signal transduction pathways comprising a histidine kinase and its cognate response regulator play a dominant role in the adaptation of Mycobacterium tuberculosis to its host, and its virulence, pathogenicity and latency. Autophosphorylation occurs at a conserved histidine of the histidine kinase and subsequently the phosphoryl group is transferred to the conserved aspartate of its cognate response regulator. Among the twelve two-component systems of M. tuberculosis, Rv0600c (HK1), Rv0601c (HK2) and Rv0602c (TcrA) are annotated as a unique three-protein two-component system. HK1 contains an ATP-binding domain, and HK2, a novel Hpt mono-domain protein, contains the conserved phosphorylable histidine residue. HK1 and HK2 complement each other's functions. Interactions among different domains of the HK1, HK2 and TcrA proteins were studied using a yeast two-hybrid system. Self-interaction was observed for HK2 but not for HK1 or TcrA. HK2 was found to interact reasonably well with both HK1 and TcrA, but HK1 interacted weakly with TcrA. The conserved aspartate-containing receiver domain of TcrA interacted well with HK2 but not with HK1. These results suggest the existence of a novel signalling mechanism amongst HK1-HK2-TcrA, and a model for this mechanism is proposed.

Bax/Bak-Dependent Release of DDP/TIMM8a Promotes Drp1-Mediated Mitochondrial Fission and Mitoptosis during Programmed Cell Death

Mitochondrial morphology within cells is controlled by precisely regulated rates of fusion and fission . During programmed cell death (PCD), mitochondria undergo extensive fragmentation and ultimately caspase-independent elimination through a process known as mitoptosis . Though this increased fragmentation is due to increased fission through the recruitment of the dynamin-like GTPase Drp1 to mitochondria , as well as to a block in mitochondrial fusion , cellular mechanisms underlying these processes remain unclear. Here, we describe a mechanism for the increased mitochondrial Drp1 levels and subsequent stimulation of mitochondrial fission seen during PCD. We observed Bax/Bak-mediated release of DDP/TIMM8a, a mitochondrial intermembrane space (IMS) protein , into the cytoplasm, where it binds to and promotes the mitochondrial redistribution of Drp1, a mediator of mitochondrial fission. Using both loss- and gain-of-function assays, we also demonstrate that the Drp1- and DDP/TIMM8a-dependent mitochondrial fragmentation observed during PCD is an important step in mitoptosis, which in turn is involved in caspase-independent cell death. Thus, following Bax/Bak-mediated mitochondrial outer membrane permeabilization (MOMP), IMS proteins released comprise not only apoptogenic factors such as cytochrome c involved in caspase activation but also DDP/TIMM8a, which activates Drp1-mediated fission to promote mitochondrial fragmentation and subsequently elimination during PCD.

Lens Crystallins and Their Microbial Homologs: Structure, Stability, and Function

Referee: Franz Schmid, Biochemicshes Laboratorium, Universitaet Bayeuth, D-95440 Bayeuth, Germanyabg-Crystallins are the major protein components in the vertebrate eye lens — a as a molecular chaperone and b and g as structural proteins. Surprisingly, the latter two share some structural characteristics with a number of microbial stress proteins. The common denominator is not only the Greek key topology of their polypeptide chains but also their high intrinsic stability, which, in certain microbial crystallin homologs, is further enhanced by high-affinity Ca2+-binding. Recent studies of natural and mutant vertebrate bg-crystallins as well as spherulin 3a from Physarum polycephalum and Protein S from Myxococcus xanthus allowed the correlation of structure and stability of crystallins to be elucidated in some detail. From the thermo-dynamic point of view, stability increments come from (1) local interactions involved in the close packing of the cooperative units, (2) the all-b secondary structure of the Greek-key motif, (3) intramolecular interactions between domains, (4) intermolecular domain interactions, including 3D domain swapping and (v) excluded volume effects due to “molecular crowding” at the high cellular protein concentrations. Apart from these contributions to the Gibbs free energy of stability, significant kinetic stabilization originates from the high activation energy barrier determining the rate of unfolding from the native to the unfolded state. From the functional point of view, the high stability is responsible for the long-term transparency of the eye lens, on the one hand, and the stress resistance of the microorganisms in their dormant state on the other. Local structural perturbations due to chemical modification, wrong protein interactions, or other irreversible processes may lead to protein aggregation. A leading cataract hypothesis is that only after a-crystallin, a member of the small heat-shock protein family, is titrated out does pathological opacity occur. Understanding the structural basis of protein stability in the healthy eye lens is the route to solve the enormous medical and economical problem of cataract.

Eye lens βB2-crystallin: circular permutation does not influence the oligomerization state but enhances the conformational stability

The related vertebrate eye lens polypeptides, βB2- and γB-crystallin, each fold into two similar β-sheet domains. The main difference is the state of oligomerization resulting from intermolecular domain interactions in the oligomeric β-crystallins and intramolecular contacts in the monomeric γ-crystallins. The question arises whether it is possible to create a monomeric γB-like βB2-molecule by protein engineering methods. We wanted to produce such a molecule by circularly permuting the domains of βB2-crystallin. The new termini were created from the original connecting peptide, and the new linker from stumps of the original extensions, while the rest of the flexible extensions were deleted. As judged by circular dichroism and fluorescence, the permutation causes little change in the structure of the protein. The circularly permuted protein forms dimers as wild-type βB2-crystallin. On the other hand, cpβB2 shows a slightly enhanced stability against urea with a midpoint of transition of 2.1 M urea versus 1.9 M for the wild-type protein lacking N and C-terminal arms, thus indicating stronger domain interactions. To our knowledge this is the first circularly permuted protein which exhibits a higher stability than the corresponding wild-type protein.

Domain interactions and connecting peptides in lens crystallins

beta B2- and gamma B-crystallin from bovine eye-lens are closely related proteins, topologically distinct mainly by virtue of the linker peptide connecting the two domains in each polypeptide chain. In homodimeric beta B2-crystallin, the extended conformation of the connecting peptide has been suggested to force the beta B2-molecule to favor intermolecular domain interactions compared with intramolecular contacts in monomeric gamma B-crystallin. From this one may postulate that the conserved interdomain contacts are essential for the overall stability of crystallins. This was clearly confirmed for gamma B-crystallin, since its isolated C-terminal domain is significantly less stable than in the context of native gamma B. Exchanging the linker peptide of gamma B- for that of beta B2-crystallin yields a monomeric protein with stability characteristics identical to gamma B-crystallin. We conclude that the domain-interface itself rather than the connecting peptide determines the mode of domain association in crystallins, as the linker in the gamma B beta-mutant is evidently twisted to a turn similar to the one in natural gamma B-crystallin.