Initial Wavelength Research Articles

Polarization-controlled Brillouin scattering in elliptical optophononic resonators

The fast-growing development of optomechanical applications has motivated advancements in Brillouin scattering research. In particular, the study of high-frequency acoustic phonons at the nanoscale is interesting due to the large range of interactions with other excitations in matter. However, standard Brillouin spectroscopy schemes rely on fixed wavelength filtering, which limits their usefulness for the study of tunable optophononic resonators. It has been recently demonstrated that elliptical optophononic micropillar resonators induce different energy-dependent polarization states for the Brillouin and the elastic Rayleigh scattering and that a polarization filtering setup could be implemented to increase the contrast between the inelastic and elastic scattering of the light. An optimal filtering configuration can be reached when the polarization states of the laser and the Brillouin signal are orthogonal to each other. In this work, we theoretically investigate the parameters of such polarization-based filtering techniques to enhance the efficiency of Brillouin scattering detection. For the filtering optimization, we explore the initial wavelength and polarization state of the incident laser, as well as the ellipticity of the micropillars, and reach an almost optimal configuration for nearly background-free Brillouin detection. Our findings are one step forward in the efficient detection of Brillouin scattering in nanostructures for potential applications in fields such as optomechanics and quantum communication.

Miniature fiber optic SPR high sensitivity humidity sensor based on coated polyvinyl alcohol film

For the measurement of relative humidity, this study employed Surface Plasmon Resonance (SPR) technology, a sensor with a micro-conical fiber structure (sensing length is only 375 μm) was combined with Polyvinyl Alcohol (PVA) to create a humidity sensor that is highly sensitive, compact, dense, and exhibits good linearity. The humidity sensor is based on a gold film (thickness of about 40 nm) on the surface of the miniature fiber optic structure, and by applying PVA coating, the SPR humidity sensor shows resonance peaks in the transmission spectrum in ambient air, and as the number of layers of PVA coating (thickness) is added, the resonance peaks’ positions are red-shifted. The experimental findings demonstrated that this SPR humidity sensor’s sensitivity was 0.162 nm/%RH at an initial resonance wavelength of about 550 nm (one layer) and about 1.542 nm/%RH at an initial resonance wavelength of 656 nm (five layers) in the range of 46 %RH to 93 %RH. The wavelength and the relative humidity had a good linear connection. Temperature tests revealed the sensor has a −0.152 nm/°C temperature sensitivity between 20 °C and 50 °C and has a high linearity (0.999). Therefore, the sensor has potential applications in humidity measurement.

Unveiling the photocatalytic application of niobia based n-n heterojunction for degradation of tetracycline: A sustainable approach for water treatment

This study investigates the efficacy of a novel Nb2O5–MoO3 n-n heterojunction as a photocatalyst for the degradation of tetracycline in aqueous solution. The synthesized heterojunction shows remarkable photocatalytic activity attributed to the synergistic effect of niobium pentoxide (Nb2O5) and molybdenum trioxide (MoO3). Various characterization techniques, including X-ray diffraction, scanning electron microscopy and energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy etc., were employed to elucidate the structural and morphological features of the heterojunction. The band gap energy and surface area were observed to be 2.55 eV and 32.897 m2/g respectively. The photocatalytic degradation of tetracycline was systematically studied under various experimental conditions, including catalytic dosage, initial tetracycline concentration and wavelength of irradiation light. These results reveal the greater efficiency of Nb2O5–MoO3 heterojunction compared to that of pristine Nb2O5 with a complete degradation achieved in 60 min under visible region with a degradation rate of 4.9 × 102 min−1. Furthermore, the catalyst demonstrates excellent stability over multiple cycles of use.

Transition to plastic regime for Rayleigh-Taylor instability in soft solids.

Rayleigh-Taylor instability (RTI) is observed in soft materials that have significant resistance to yield. Estimating the instability threshold is critical to several engineering applications and has been the topic of several studies in past decades. However, limited attention has been given to the elastic-to-plastic (EP) transition threshold, where material properties vary significantly. This study explores the phase transition between the pure elastic and stable plastic regimes in RTI in a soft solid (mayonnaise) using a rotating wheel experimental setup with a time-varying acceleration profile. The material properties of the soft solid are characterized using rheological techniques. Different initial perturbation wavelength and amplitude combinations are used to analyze their role in the EP transition threshold and the subsequent maximum fully recoverable elastic strain. The effects of the initial perturbation dimensions, the steepness of the perturbation, and the mass of the perturbation on the stability of the samples, the EP transition thresholds, and the maximum fully recoverable elastic strains are analyzed. The samples with the largest full elastic recovery potentials and the parameters governing this phenomenon are identified, and the physics behind it is discussed. It is observed that increasing the initial perturbation wavelength decreases the required phase transition acceleration while increasing the maximum fully recoverable elastic strain. Finally, nondimensional parameters that involve the perturbation dimensions, as well as the mechanical properties of the material, are introduced to provide a generalized approach to the problem.

Crossflow Instability on a Swept Fin–Cone with Variable Nose Bluntness in Mach 6 Flow

Experiments and computational analysis have been conducted to study instabilities in the boundary layer over a swept fin–cone geometry in hypersonic flow. Experiments were carried out at the United States Air Force Academy’s Mach 6 Ludwieg Tube. Infrared thermography was employed to assess the surface temperature distribution, particularly the thermal striations on the fin that indicated a crossflow-dominated transition. Increasing the unit Reynolds number increased heating and moved the crossflow-transition front closer to the fin leading edge. Stability analysis based on the linear parabolized stability equations identified unstable stationary crossflow modes across the range of tested unit Reynolds numbers, and the most amplified disturbances were found to have wavelengths of 2–4 mm. The experimentally observed thermal striations were analyzed and found to have initial wavelengths of 2–5 mm but eventually formed higher-amplitude structures with a wavelength of approximately 10 mm. Discrete roughness elements of different diameters and spacings were implemented near the fin leading edge. Boundary-layer transition onset was found to be delayed with a subsequent lowering of the fin surface heating, with discrete roughness elements having a wavelength of 13.33 mm.

Mid‐Air Collisions Control the Wavelength of Aeolian Sand Ripples

AbstractThe wavelength of aeolian sand ripples increases with wind velocity, but the cause for this increase remained unclear until now. Using numerical simulations, we find that the relationship between the wind strength and the initial wavelength disappears without mid‐air collisions, which means that mid‐air collisions crucially contribute to the initial wavelength of ripples. As wind strength increases, the average hop length of non‐colliding particles decreases. Affected by the bed surface topography and the non‐uniform mid‐air colliding probability along the wavy surface, non‐colliding particles cause a surface modulated erosion/deposition flux. The first order contribution of the flux fluctuation destabilizes the original bed surface and has a wind‐dependent phase shift with respect to the surface profile. This phase shift leads to an initial wavelength that increases with wind velocity. Based on these findings we derive the scaling law for the initial wavelength of aeolian sand ripples, which agrees well with experimental results. A weak non‐linear relationship between ripple wavelength and wind velocity has been found, especially for large wind strengths.

Dual ligands synergy enables thermal and moisture stability-enhanced blue quasi-2D perovskite for efficient light-emitting diodes

Quasi-2D metal halide perovskite is rising for efficient blue light-emitting diodes due to strong quantum confinement and tunable emission, while a challenge remains in its poor stability of n-phase distribution under external stresses. Herein, the stable blue quasi-2D perovskite under heat and moisture conditions is achieved by dual ligand engineering. The Lewis base moieties − SO3− from taurine (3S) bind tightly with perovskite edges, inhibiting Ostwald ripening of the perovskite phase caused by the heat, and 3, 3-diphenylpropylamine (DPPA) provides a strong hydrophobicity to the perovskite film, suppressing phase disproportionation induced by the moisture. Accordingly, the blue perovskite film, modified synergistically by the 3S and DPPA dual ligands, maintains its initial photoluminescence quantum yield (PLQY) after over 200 h with 70 °C heating, and only exhibiting a redshift in PL peak wavelength less than 10 nm. Exposing under environment condition of 20 % relative humidity for 300 h, the blue perovskite film still retains its initial PL peak wavelength with PLQY exceeding 50 % of the initial value. This achievement establishes a notable strategy for enhancing both the thermal and moisture stability of blue quasi-2D perovskite. Furthermore, the light-emitting diodes based on the perovskite films display the enhanced operating stability. This work offers an efficient strategy for stabilizing blue quasi-2D perovskite and the corresponding devices for the display application.

A D-Shaped Polymer Optical Fiber Surface Plasmon Resonance Biosensor for Breast Cancer Detection Applications.

Fiber-optic biosensors have garnered significant attention and witnessed rapid development in recent years owing to their remarkable attributes such as high sensitivity, immunity to electromagnetic interference, and real-time monitoring. They have emerged as a potential tool in the realm of biomarker detection for low-concentration and small molecules. In this paper, a portable and cost-effective optical fiber biosensor based on surface plasmon resonance for the early detection of breast cancer is demonstrated. By utilizing the aptamer human epidermal growth factor receptor 2 (HER2) as a specific biomarker for breast cancer, the presence of the HER2 protein can be detected through an antigen-antibody binding technique. The detection method was accomplished by modifying a layer of HER2 aptamer on the flat surface of a gold-coated D-shaped polymer optical fiber (core/cladding diameter 120/490 μm), of which the residual thickness after side-polishing was about 245 μm, the thickness of the coated gold layer was 50 nm, and the initial wavelength in pure water was around 1200 nm. For low-concentration detection of the HER2 protein, the device exhibited a wavelength shift of ~1.37 nm with a concentration of 1 μg/mL (e.g., 5.5 nM), which corresponded to a limit of detection of ~5.28 nM. Notably, the response time of the biosensor was measured to be as fast as 5 s. The proposed biosensor exhibits the potential for early detection of HER2 protein in initial cancer serum and offers a pathway to early prevention of breast cancer.

Generation of Waves in the Gravitational Field of the Universe

The gravitational field naturally perturbs due to the wave (light, x-ray, infrared, etc.). The gravitational field encompasses everything. Wave formation, like to that of the natural world. In the natural world, when wood and plants burn, a chemical reaction produces CO2, CO, and other gases. During this chemical process, tiny particles (atoms, molecules, etc.) vibrate, and their vibrations get intense enough to cause the gravitational field to be disrupted. This kind of vibration creates waves in the surrounding gravitational field and propagates them forward with a specific initial power, wavelength, and amplitude.

Optimizations of performance in a spectral beam splitting photovoltaic/thermal system using ideal optical windows

Performance of a spectral beam splitting photovoltaic/thermal system depends on the characteristics of the splitting liquid. The ideal optical window directly guides the selection of splitting liquid. Most of the existing research established ideal optical windows in step function shapes and there is lack of systematic investigations. In this paper, the wavelength range to be studied is divided into discrete independent grids, thus introducing gridded transmissivity. A hypothetical liquid with unknown gridded transmissivity is used in a double-pass spectral beam splitting photovoltaic/thermal system model. Using particle swarm optimization algorithm, taking the best system performance as the target, the gridded transmissivity is determined. As the grid number increases, the determined distribution of gridded transmissivity converges to a step function. Based on the determined pattern, further optimizations are conducted. Moreover, considering the power consumption of the pump, the initial wavelengths, termination wavelengths, and flow rates to achieve the maximum efficiencies are also determined and discussed. Finally, metallic nanofluids are used to approach a determined ideal optical window. Combination of multiple kinds of metallic nanoparticles shows improvement over one kind in the system. A broadly tenable trend that being closer to the optimal window results in higher efficiency is also obtained.

KHg4Ga3S9: A Hg-Based Sulfide with Nonlinear-Optical Activity in the A-MII-MIII-Q (A = Alkali Metal; MII = d10 Metal; MIII = Ga, In; Q = S, Se) System.

The search for new high-performance infrared (IR) nonlinear-optical (NLO) materials is a hot topic in the fields of laser chemistry and inorganic solid-state chemistry. Here, a new Hg-based sulfide KHg4Ga3S9 in the family of A-MII-MIII-Q (A = alkali metal; MII = d10 metal; MIII = Ga, In; Q = S, Se) was synthesized. It crystallizes in the orthogonal system of the C2221 structure, which is rare for IR NLO chalcogenides. Its anionic framework {[Hg4Ga3S9]-}∞ is constructed by two types of interconnected helical chains, viz., the inner layer ({[Hg6Ga2S29/3]4/3-}∞) and the outer layer ({[Hg2Ga4S25/3]2/3-}∞). It exhibits a moderate NLO response and a high laser-induced damage threshold. Theoretical calculations indicate that the HgS4 unit accounts for its much larger NLO response compared to RbCd4Ga3S9. The influence of alkali metals and d10 metals on the initial phase-matching wavelength is also discussed. This work provides inspiration for improving the properties of NLO materials' properties.

Investigation of Physiochemical Impact of Organic Molecule L-Lysine on Ammonium Dihydrogen Phosphate Single Crystal for Optoelectronics Applications

Ammonium dihydrogen phosphate (ADP) single crystals along with the incorporated 0.5 and 1% L-lysine, an organic molecule which possesses a good nonlinear response, were grown with the vision to meet the requirements of the optoelectronic industry. The inclusion of the L-lysine molecule in the crystal was confirmed by the XRD and EDX. The experiment not only confirms the inclusion level of the impurity but also the capability of the amino acid molecule to bond hydrogen within the crystal facet. A minor decrease in lattice parameters was reported for all ADP: L-lysine crystals compared with pure ADP. The structures of the grown crystals were identified as tetragonal with the space group I42d by the single-crystal XRD analysis. Vibrational signatures and functional groups were confirmed using FTIR spectroscopy. The thermal stability and decomposition temperatures of 0.5 and 1% L-lysine-added crystals were measured by TG/DTA and found to be 203 °C and 207 °C, respectively. The UV–visible transmission spectra prove a higher transparency for doped crystals as compared to pure crystals; therefore, these doped crystals can be considered the best option for the frequency doubling process in a broad range of visible and near-IR spectra. The improved hardness of the doped crystals was confirmed by the Vickers hardness data. The nonlinear optical (NLO) behaviour investigated using a second-harmonic generation (SHG) technique, indicating an efficient quadratic nonlinear coefficient of ADP: Lysine crystals at a 1064 nm initial wavelength, shows about 1.5-fold higher efficiency compared with undoped ADP.

High-Precision Wavelength Tuning of GeSn Nanobeam Lasers via Dynamically Controlled Strain Engineering.

The technology to develop a large number of identical coherent light sources on an integrated photonics platform holds the key to the realization of scalable optical and quantum photonic circuits. Herein, a scalable technique is presented to produce identical on-chip lasers by dynamically controlled strain engineering. By using localized laser annealing that can control the strain in the laser gain medium, the emission wavelengths of several GeSn one-dimensional photonic crystal nanobeam lasers are precisely matched whose initial emission wavelengths are significantly varied. The method changes the GeSn crystal structure in a region far away from the gain medium by inducing Sn segregation in a dynamically controllable manner, enabling the emission wavelength tuning of more than 10nm without degrading the laser emission properties such as intensity and linewidth. The authors believe that the work presents a new possibility to scale up the number of identical light sources for the realization of large-scale photonic-integrated circuits.

Two-temperature GRMHD simulations of black hole accretion flows with multiple magnetic loops

ABSTRACT We have performed a series of two-dimensional two-temperature general relativistic magnetohydrodynamic simulations of magnetized accretion flows initiated from tori with different sizes and poloidal magnetic loop polarities. In these two-temperature simulations, we trace the process of heating electrons through turbulence and reconnection, most of the time these electrons are trapped in plasmoids. We found that the accretion process strongly depends on the size of the magnetic loops. The accretion flows never reach the magnetically arrested (MAD) regime in small loop cases. Interaction between magnetic field with different polarities dissipates and decreases the efficiency of magnetorotational instability. The dependence on the wavelength of the loops places a lower limit on the loop size. In the large loop cases, after reaching a quasi-steady phase, a transition from standard and normal evolution flow to MAD flow is observed. The transition of the accretion state and the transition time depends on the initial loop wavelength. The formation of plasmoids strongly depends on the size of the magnetic loops. The frequent magnetic reconnection between the magnetic loops is responsible for the formation of most of the plasmoids. For some plasmoids, Kelvin–Helmholtz and tearing instabilities are coexisting, showing another channel of plasmoid formation. The simulations present that electrons in the plasmoids are well-heated up by turbulent and magnetic reconnection. Different properties of plasmoid formation in different magnetic field configurations provide new insights for the understanding of flaring activity and electron thermodynamics in Sagittarius A*.

A Numerical Study on the Influence of Cerebrospinal Fluid Pressure on Brain Folding

AbstractOver the past decades, the buckling instability of layered materials has been the subject of analytical, experimental, and numerical research. These systems have traditionally been considered with stress-free surfaces, and the influence of surface pressure is understudied. In this study, we developed a finite element model of a bilayer experiencing compression, and found that it behaves differently under surface pressure. We investigated the onset of buckling, the initial wavelength, and the post-buckling behavior of a bilayer system under two modes of compression (externally applied and internally generated by growth). Across a wide range of stiffness ratios, 1 < μf/μs < 100, we observed decreased stability in the presence of surface pressure, especially in the low-stiffness-contrast regime, μf/μs < 10. Our results suggest the importance of pressure boundary conditions for the stability analysis of bilayered systems, especially in soft and living matter physics, such as folding of the cerebral cortex under cerebrospinal fluid pressure, where pressure may affect morphogenesis and buckling patterns.

Plastic Photonic Synapse Based on VCSOA for Self-Learning in Photonic Spiking Neural Network

We propose and demonstrate a plastic photonic synapse to achieve all-optical synaptic plasticity based on the potentiated and depressed dynamics in commercially available vertical-cavity semiconductor optical amplifier (VCSOA). The effects of presynaptic and postsynaptic spike powers, bias current, initial wavelength detuning between presynaptic spike and VCSOA on the potentiated and depressed time windows are investigated. The numerical results show that all-optical synaptic plasticity can be achieved successfully based on VCSOA with delayed self-feedback loop. The proof-of-concept experimental results show that plastic photonic synapse can be achieved based on the VCSOA with subsequent iterations. Besides, the curve of VCSOA gain in the potentiated and depressed time windows is similar to that of spike timing dependent plasticity. Furthermore, all-optical unsupervised self-learning and recognition of first spike timing of an input pattern are realized numerically in the photonic neural network including two proposed plastic photonic synapses. The plastic photonic synapse based on a VCSOA is interesting and valuable for the self-learning in all-optical neural networks. Moreover, the proposed plastic photonic synapse offers great potential for dense, high-performance neuromorphic photonic systems.

Freeze-out of perturbation growth of single-mode helium–air interface through reflected shock in Richtmyer–Meshkov flows

‘Freeze-out’ of amplitude growth, i.e. the amplitude growth stagnation of a shocked helium–air interface, is realized through a reflected shock, which produces baroclinic vorticity of the opposite sign to that deposited by the first shock. Theoretically, a model is constructed to calculate the relations among the initial parameters for achieving freeze-out. In particular, if the amplitude growth is within the linear regime at the arrival of the reflected shock, the time interval between the impacts of two shock waves is linearly related to the initial perturbation wavelength, and is independent of the initial perturbation amplitude. Experimentally, an air–SF $_6$ (or air–argon) plane interface is adopted to produce a weak reflected shock. Seven experimental runs with specific initial conditions are examined. For all cases, freeze-out is achieved after the reflected shock impact under the designed conditions.

Initial Drift Correction and Spectral Calibration of MarSCoDe Laser-Induced Breakdown Spectroscopy on the Zhurong Rover

The Mars Surface Composition Detector (MarSCoDe) carried by the Zhurong rover of China’s Tianwen-1 mission uses Laser-Induced Breakdown Spectroscopy (LIBS) to detect and analyze the material composition on Martian surfaces. As one extraterrestrial remote LIBS system, it is necessary to adopt effective and reliable preprocessing methods to correct the spectral drift caused by the changes in environmental conditions, to ensure the analysis accuracy of LIBS scientific data. This paper focuses on the initial spectral drift correction and estimates the accuracy of on-board wavelength calibration on the LIBS calibration target measured by the MarSCoDe LIBS. There may be two cases during the instrument launch and landing, as well as the long-term operation: (a) the initial wavelength calibration relationship can still apply to the on-board LIBS measurement; and (b) the initial wavelength calibration relationship has been changed, and a new on-board calibration is needed to establish the current relationship. An approach of matching based on global iterative registration (MGR) is presented in respect to case (a). It is also compared with the approach of particle swarm optimization (PSO) for case (b). Furthermore, their accuracy is estimated with the comparison to the National Institute of Standards and Technology (NIST) database. The experimental results show that the proposed approach can effectively correct the drift of the on-board LIBS spectrum. The the root-mean-square error (RMSE) of the internal accord accuracy for three channels is 0.292, 0.223 and 0.247 pixels, respectively, compared with the corrected Ti-alloy spectrum and the NIST database, and the RMSE of the external accord accuracy is 0.232, 0.316 and 0.229 pixels, respectively, for other samples. The overall correction accuracy of the three channels is better than one-third of the sampling interval.

High stability microfiber Sagnac loop liquid refractive index sensor with FBG mode selecting

As a high-resolution sensor, it is very important to improve the spectral stability of microfiber Sagnac loop interferometer. A fiber Bragg grating (FBG) mode selecting method is proposed and demonstrated. The method can filter out some cladding modes by FBG in the Sagnac loop and make working modes energy more concentrated, which shows that the interference spectrum becomes more uniform. At the same time, the sensitivity and linearity of the sensor can be improved slightly by this method. In our experiment, the resolution of sensor can get 1.41 × 10-5 ∼ 7.49 × 10-6 in the liquid refractive index range of 1.3330∼1.38481. Moreover, this method can effectively improve the spectral stability of the interferometer, which shows that the dip wavelength absolute error of time fluctuation is improved from ±0.358 nm to 0.021 nm and from ±0.116 nm to 0.000 nm at 1536.6 nm and 1559.9 nm initial dip wavelength, respectively. This method also has advantages of compact structure, good mechanical properties, and easy preparation. On this basis, the FBG also can be replaced by various modes filters to develop more multifunctional high stability interferometers according to the detection needs.

Investigation of Strain-Temperature Cross-Sensitivity of FBG Strain Sensors Embedded Onto Different Substrates

The strain-temperature cross-sensitivity problem easily occurs in the engineering strain monitoring of the self-sensing embedded with fiber Bragg grating (FBG) sensors. In this work, a theoretical investigation of the strain-temperature cross-sensitivity has been performed using the temperature reference grating method. To experimentally observe and theoretically verify the problem, the substrate materials, the preloading technique, and the FBG initial central wavelength were taken as main parameters. And a series of sensitivity coefficients calibration tests and temperature compensation tests have been designed and carried out. It was found that when the FBG sensors were embedded on different substrates, their coefficients of the temperature sensitivity were significantly changed. Besides, the larger the coefficients of thermal expansion (CTE) of substrates were, the higher the temperature sensitivity coefficients would be. On the other hand, the effect of the preloading technique and FBG initial wavelength was negligible on both the strain monitoring and temperature compensation. In the case of similar substrates, we did not observe any difference between temperature sensitivity coefficients of the temperature compensation FBG with one free end or two free ends. The curves of the force along with temperature were almost overlapped with minor differences (less than 1%) gained by FBG sensors and pressure sensors, which verified the accuracy of the temperature compensation method. We suggest that this work can provide efficient solutions to the strain-temperature cross-sensitivity for engineering strain monitoring with the self-sensing element embedded with FBG sensors.