Initial Oxidation Step Research Articles

Reaxff MD Analysis of Substrate Material Properties into Oxide Films during Thermal Oxidation Process of Group IV Semiconductor Materials

Oxide films used in semiconductor devices have attracted much attention because they can protect substrate surfaces from impurities and suppress current loss. In recent years, there have been growing expectations for oxide film formation on Ge substrate materials, which have a uniquely high hole mobility among group IV semiconductor materials. We have investigated an efficient oxide film formation method using reactive molecular dynamics (ReaxFF MD) simulation. We focused on dissociation, the initial step of oxidation, and confirmed how easily dissociation occurs. To search for conditions that promote dissociation, we checked the dangling bound density and adsorption angle on the substrate surface. The wider space between dimers on the Ge substrate may result in a shallower O2 adsorption angle. This increases the dissociation rate because each of the two O2 atoms is more likely to bond to the substrate.

Toward the Use of Methyl-Coenzyme M Reductase for Methane Bioconversion Applications.

ConspectusAs the main component of natural gas and renewable biogas, methane is an abundant, affordable fuel. Thus, there is interest in converting these methane reserves into liquid fuels and commodity chemicals, which would contribute toward mitigating climate change, as well as provide potentially sustainable routes to chemical production. Unfortunately, specific activation of methane for conversion into other molecules is a difficult process due to the unreactive nature of methane C-H bonds. The use of methane activating enzymes, such as methyl-coenzyme M reductase (MCR), may offer a solution. MCR catalyzes the methane-forming step of methanogenesis in methanogenic archaea (methanogens), as well as the initial methane oxidation step during the anaerobic oxidation of methane (AOM) in anaerobic methanotrophic archaea (ANME). In this Account, we highlight our contributions toward understanding MCR catalysis and structure, focusing on features that may tune the catalytic activity. Additionally, we discuss some key considerations for biomanufacturing approaches to MCR-based production of useful compounds.MCR is a complex enzyme consisting of a dimer of heterotrimers with several post-translational modifications, as well as the nickel-hydrocorphin prosthetic group, known as coenzyme F430. Since MCR is difficult to study in vitro, little information is available regarding which MCRs have ideal catalytic properties. To investigate the role of the MCR active site electronic environment in promoting methane synthesis, we performed electric field calculations based on molecular dynamics simulations with a MCR from Methanosarcina acetivorans and an ANME-1 MCR. Interestingly, the ANME-1 MCR active site better optimizes the electric field with methane formation substrates, indicating that it may have enhanced catalytic efficiency. Our lab has also worked toward understanding the structures and functions of modified F430 coenzymes, some of which we have discovered in methanogens. We found that methanogens produce modified F430s under specific growth conditions, and we hypothesize that these modifications serve to fine-tune the activity of MCR.Due to the complexity of MCR, a methanogen host is likely the best near-term option for biomanufacturing platforms using methane as a C1 feedstock. M. acetivorans has well-established genetic tools and has already been used in pilot methane oxidation studies. To make methane oxidation energetically favorable, extracellular electron acceptors are employed. This electron transfer can be facilitated by carbon-based materials. Interestingly, our analyses of AOM enrichment cultures and pure methanogen cultures revealed the biogenic production of an amorphous carbon material with similar characteristics to activated carbon, thus highlighting the potential use of such materials as conductive elements to enhance extracellular electron transfer.In summary, the possibilities for sustainable MCR-based methane conversions are exciting, but there are still some challenges to tackle toward understanding and utilizing this complex enzyme in efficient methane oxidation biomanufacturing processes. Additionally, further work is necessary to optimize bioengineered MCR-containing host organisms to produce large quantities of desired chemicals.

Self‐assembly aryl cyclopalladated imine film supported on the silicon surface—Fabrication, formation of active PdPd/PdO sites, and catalytic properties for Sonogashira cross‐coupling reaction

Tailoring the structure and arrangement of the organometallic catalyst are essential for the fundamental investigating and applications, and the impacting challenges, such as the size, active species distribution, and composition, as well as the orientation of catalyst, are critical for determining their activities and efficiencies. Herein, a series of aryl cyclopalladated catalysts containing different alkane chains were synthesized, and their self‐assembly films covalent binding to the silicon surface were fabricated and characterized with water drop contact angle, Raman, atomic force microscopy, scanning electron microscopy, and X‐ray photoelectron spectroscopy. The catalytic performances of these catalytic films were explored using Sonogashira cross‐coupling reaction as a template. One of these catalytic films exhibited a higher catalytic activity with a TON value of up to 68,333 h−1, which was 20 times higher than that of homogeneous catalyst due to the ordered arrangement of this catalyst on the silicon surface, and could be reused at least seven times. The catalytic mechanism was heterogeneous catalysis occurred at interface confirmed by hot filtration tests, poisoning tests, and ReactIR. The real active site was PdPd/PdO, and the synergistic effect between Pd and PdO in the active sites (PdPd/PdO) made the key initial oxidation step easily proceed, improving its catalytic activity. The loss of active sites and residues absorbed on the surface of catalytic film were the main reason for deactivation.

Inactivation of vitamin D2 metabolites by human CYP24A1

Vitamin D is found in two forms in humans, D3 produced in the skin and D2 solely from the diet. Both 25-hydroxyvitamin D (25(OH)D) and 1,25-dihydroxyvitamin D (1,25(OH)2D) are oxidised and inactivated by CYP24A1, a tightly regulated mitochondrial enzyme that controls serum levels of these secosteroids. The pathways of oxidation of 25(OH)D2 and 1,25(OH)2D2, particularly 25(OH)D2, by human CYP24A1 are not well characterized. The aim of this study was to further elucidate these pathways, and to compare the kinetics of metabolism of 25(OH)D2 and 1,25(OH)2D2 with their vitamin D3 counterparts. We used expressed and partially purified human CYP24A1 with substrates dissolved in the membrane of phospholipid vesicles, to mimic the inner mitochondrial membrane. We found that the major pathways for side chain oxidation of 25(OH)D2 and 1,25(OH)2D2 were identical and that predominant intermediates of 25(OH)D2 metabolism could be converted to the corresponding intermediates in the pathway of 1,25(OH)2D2 oxidation by 1α-hydroxylation by CYP27B1. The initial steps in the CYP24A1-mediated oxidation involved hydroxylation at the C24R position, and another unknown position where the alcohol was oxidised to an aldehyde. The 24R-hydroxylation was followed by hydroxylation at C26 or C28, or cleavage between C24 and C25 to produce the 24-oxo-25,26,27-trinor derivative. All of these products were further oxidised, with 24-oxo-25,26,27-trinor-1(OH)D2 giving a product tentatively identified as 24-oxo-25,26,27-trinor-1,28(OH)2D2. The catalytic efficiency (kcat/Km) of CYP24A1 for initial 25(OH)D2 hydroxylation was similar to that for 25(OH)D3, indicating that they have similar rates of inactivation at low substrate concentrations, supporting that vitamins D2 and D3 are equally effective in maintaining serum 25(OH)D concentrations. In contrast, the kcat/Km value for 1,25(OH)2D3 was almost double that for 1,25(OH)2D2 indicating a lower rate of inactivation of 1,25(OH)2D2 at a low substrate concentration, suggesting that it has increased metabolic stability in vivo.

Mechanistic Study of Glucose Photoreforming over TiO2-Based Catalysts for H2 Production.

Glucose is a key intermediate in cellulose photoreforming for H2 production. This work presents a mechanistic investigation of glucose photoreforming over TiO2 and Pt/m-TiO2 catalysts. Analysis of the intermediates formed in the process confirmed the α-scission mechanism of glucose oxidation forming arabinose (Cn-1 sugar) and formic acid in the initial oxidation step. The selectivity to sugar products and formic acid differed over Pt/TiO2 and TiO2, with Pt/TiO2 showing the lower selectivity to formic acid due to enhanced adsorption/conversion of formic acid over Pt/TiO2. In situ ATR-IR spectroscopy of glucose photoreforming showed the presence of molecular formic acid and formate on the surface of both catalysts at low glucose conversions, suggesting that formic acid oxidation could dominate surface reactions in glucose photoreforming. Further in situ ATR-IR of formic acid photoreforming showed Pt-TiO2 interfacial sites to be key for formic acid oxidation as TiO2 was unable to convert adsorbed formic acid/formate. Isotopic studies of the photoreforming of formic acid in D2O (with different concentrations) showed that the source of the protons (to form H2 at Pt sites) was determined by the relative surface coverage of adsorbed water and formic acid.

Structural and functional insights into the flexible β-hairpin of glycerol dehydrogenase.

During glycerol metabolism, the initial step of glycerol oxidation is catalysed by glycerol dehydrogenase (GDH), which converts glycerol to dihydroxyacetone in a NAD+ -dependent manner via an ordered Bi-Bi kinetic mechanism. Structural studies conducted with GDH from various species have mainly elucidated structural details of the active site and ligand binding. However, the structure of the full GDH complex with both cofactor and substrate bound is not determined, and thus, the structural basis of the kinetic mechanism of GDH remains unclear. Here, we report the crystal structures of Escherichia coli GDH with a substrate analogue bound in the absence or presence of NAD+ . Structural analyses including molecular dynamics simulations revealed that GDH possesses a flexible β-hairpin, and that during the ordered progression of the kinetic mechanism, the flexibility of the β-hairpin is reduced after NAD+ binding. It was also observed that this alterable flexibility of the β-hairpin contributes to the cofactor binding and possibly to the catalytic efficiency of GDH. These findings suggest the importance of the flexible β-hairpin to GDH enzymatic activity and shed new light on the kinetic mechanism of GDH.

Stereoinversion via Alcohol Dehydrogenases Enables Complete Catabolism of β-1-Type Lignin-Derived Aromatic Isomers.

Sphingobium sp. strain SYK-6 is an efficient aromatic catabolic bacterium that can consume all four stereoisomers of 1,2-diguaiacylpropane-1,3-diol (DGPD), which is a ring-opened β-1-type dimer. Recently, LdpA-mediated catabolism of erythro-DGPD was reported in SYK-6, but the catabolic pathway for threo-DGPD was as yet unknown. Here, we elucidated the catabolism of threo-DGPD, which proceeds through conversion to erythro-DGPD. When threo-DGPD was incubated with SYK-6, the Cα hydroxy groups of threo-DGPD (DGPD I and II) were initially oxidized to produce the Cα carbonyl form (DGPD-keto I and II). This initial oxidation step is catalyzed by Cα-dehydrogenases, which belong to the short-chain dehydrogenase/reductase (SDR) family and are involved in the catabolism of β-O-4-type dimers. Analysis of seven candidate genes revealed that NAD+-dependent LigD and LigL are mainly involved in the conversion of DGPD I and II, respectively. Next, we found that DGPD-keto I and II were reduced to erythro-DGPD (DGPD III and IV) in the presence of NADPH. Genes involved in this reduction were sought from Cα-dehydrogenase and ldpA-neighboring SDR genes. The gene products of SLG_12690 (ldpC) and SLG_12640 (ldpB) catalyzed the NADPH-dependent conversion of DGPD-keto I to DGPD III and DGPD-keto II to DGPD IV, respectively. Mutational analysis further indicated that ldpC and ldpB are predominantly involved in the reduction of DGPD-keto. Together, these results demonstrate that SYK-6 harbors a comprehensive catabolic enzyme system to utilize all four β-1-type stereoisomers through successive oxidation and reduction reactions of the Cα hydroxy group of threo-DGPD with a net stereoinversion using multiple dehydrogenases. IMPORTANCE In many catalytic depolymerization processes of lignin polymers, aryl-ether bonds are selectively cleaved, leaving carbon-carbon bonds between aromatic units intact, including dimers and oligomers with β-1 linkages. Therefore, elucidating the catabolic system of β-1-type lignin-derived compounds will aid in the establishment of biological funneling of heterologous lignin-derived aromatic compounds to value-added products. Here, we found that threo-DGPD was converted by successive stereoselective oxidation and reduction at the Cα position by multiple alcohol dehydrogenases to erythro-DGPD, which is further catabolized. This system is very similar to that developed to obtain enantiopure alcohols from racemic alcohols by artificially combining two enantiocomplementary alcohol dehydrogenases. The results presented here demonstrate that SYK-6 has evolved to catabolize all four stereoisomers of DGPD by incorporating this stereoinversion system into its native β-1-type dimer catabolic system.

Insight into Different Stages of Steroid Degradation in Thermophilic Saccharopolyspora hirsuta VKM Ac-666T Strain.

Steroids are abundant molecules in nature, and various microorganisms evolved to utilize steroids. Thermophilic actinobacteria play an important role in such processes. However, very few thermophiles have so far been reported capable of degrading or modifying natural sterols. Recently, genes putatively involved in the sterol catabolic pathway have been revealed in the moderately thermophilic actinobacterium Saccharopolyspora hirsuta VKM Ac-666T, but peculiarities of strain activity toward sterols are still poorly understood. S. hirsuta catalyzed cholesterol bioconversion at a rate significantly inferior to that observed for mesophilic actinobacteria (mycobacteria and rhodococci). Several genes related to different stages of steroid catabolism increased their expression in response to cholesterol as was shown by transcriptomic studies and verified by RT-qPCR. Sequential activation of genes related to the initial step of cholesterol side chain oxidation (cyp125) and later steps of steroid core degradation (kstD3, kshA, ipdF, and fadE30) was demonstrated for the first time. The activation correlates with a low cholesterol conversion rate and intermediate accumulation by the strain. The transcriptomic analyses revealed that the genes involved in sterol catabolism are linked functionally, but not transcriptionally. The results contribute to the knowledge on steroid catabolism in thermophilic actinobacteria and could be used at the engineering of microbial catalysts.

DhDIT2 Encodes a Debaryomyces hansenii Cytochrome P450 Involved in Benzo(a)pyrene Degradation-A Proposal for Mycoremediation.

Pollutants, such as polycyclic aromatic hydrocarbons (PAHs), e.g., benzo(a)pyrene (BaP), are common components of contaminating mixtures. Such compounds are ubiquitous, extremely toxic, and they pollute soils and aquatic niches. The need for new microorganism-based remediation strategies prompted researchers to identify the most suitable organisms to eliminate pollutants without interfering with the ecosystem. We analyzed the effect caused by BaP on the growth properties of Candida albicans, Debaryomyces hansenii, Rhodotorula mucilaginosa, and Saccharomyces cerevisiae. Their ability to metabolize BaP was also evaluated. The aim was to identify an optimal candidate to be used as the central component of a mycoremediation strategy. The results show that all four yeast species metabolized BaP by more than 70%, whereas their viability was not affected. The best results were observed for D. hansenii. When an incubation was performed in the presence of a cytochrome P450 (CYP) inhibitor, no BaP degradation was observed. Thus, the initial oxidation step is mediated by a CYP enzyme. Additionally, this study identified the D. hansenii DhDIT2 gene as essential to perform the initial degradation of BaP. Hence, we propose that D. hansenii and a S. cerevisiae expressing the DhDIT2 gene are suitable candidates to degrade BaP in contaminated environments.

Wax worm saliva and the enzymes therein are the key to polyethylene degradation by Galleria mellonella

Plastic degradation by biological systems with re-utilization of the by-products could be a future solution to the global threat of plastic waste accumulation. Here, we report that the saliva of Galleria mellonella larvae (wax worms) is capable of oxidizing and depolymerizing polyethylene (PE), one of the most produced and sturdy polyolefin-derived plastics. This effect is achieved after a few hours’ exposure at room temperature under physiological conditions (neutral pH). The wax worm saliva can overcome the bottleneck step in PE biodegradation, namely the initial oxidation step. Within the saliva, we identify two enzymes, belonging to the phenol oxidase family, that can reproduce the same effect. To the best of our knowledge, these enzymes are the first animal enzymes with this capability, opening the way to potential solutions for plastic waste management through bio-recycling/up-cycling.

Unraveling the role of tungsten as a minor alloying element in the oxidation NiCr alloys

Ni-based superalloys offer a unique combination of mechanical properties, corrosion resistance and high temperature performance. Near ambient pressure X-ray photoelectron spectroscopy was used to study in operando the initial steps of oxidation for Ni-5Cr, Ni-15Cr, Ni-30Cr and Ni-15Cr-6W at 500 °C, p(O2)=10−6 mbar. The comparison of oxide evolution for these alloys quantifies the outsized impact of W in promoting chromia formation. For the binary alloys an increase in chromia due to Cr-surface enrichment is followed by NiO nucleation and growth thus seeding a dual-layer structure. The addition of W (Ni-15Cr-6W) shifts the reaction pathways towards chromia thus enhancing oxide quality. Density functional theory calculations confirm that W atoms adjacent to Cr create highly favorable oxygen adsorption sites. The addition of W supercharges the reactivity of Cr with oxygen essentially funneling oxygen atoms into Cr sites. The experimental results are discussed in the context of surface composition, chemistry, reactant fluxes, and microstructure.

Heat‐Triggered Ferri‐to‐Paramagnetic Transition Accelerates Redox Couple‐Mediated Electrocatalytic Water Oxidation

AbstractRedox couple oxidation as an initial step of water oxidation may be key for high electricity consumption in the electrochemical oxygen evolution reaction (OER). Here, a heat‐induced magnetic transition strategy is reported to speed up the oxidation kinetics of redox couples. The activation energy of Ni2+/Ni3+ redox couple oxidation is sharply decreased by heating the Ni0.67Fe0.33OxHy catalyst above a Curie temperature (Tc) of 70 °C. In such a strategy, heat instead of electricity drives the spin flipping of Ni2+/Ni3+ oxidation through heat‐sensitive ferri‐to‐paramagnetic spin state changes. As a result of magnetic transition‐assisted efficient heat‐electricity coupling, Ni0.67Fe0.33OxHy exhibits the lowest OER overpotential of 221 mV at 100 mA cm−2 at 90 °C in alkaline electrolytes, outperforming the benchmark IrO2 catalyst. The findings provide new insights into the design of efficient heat–electricity complementary OER devices.

Synthesis of Cyclophenacene- and Chiral-Type Cyclophenylene-Naphthylene Belts.

We report the synthesis of a [20]cyclophenacene-type cyclophenylene-naphthylene (CPN) belt and the enantioselective synthesis of chiral-type CPN belts (up to >99 % ee) by the cationic rhodium(I)-catalyzed intramolecular [2+2+2] cycloaddition of naphthalene-embedded cyclic polyynes. The synthesis of a depth-expanded CPN belt was also attempted, but the final intramolecular [2+2+2] cycloaddition was unsuccessful. Theoretical calculations clarified that the reactivity depends on the stability of the transition state in the initial oxidative cycloaddition step which is subject to molecular strain. The cylindrical structures of these CPN belts were confirmed by X-ray crystallographic analyses. As a result of π-extension through the introduction of naphthalenes in the chiral-type CPN belts, the anisotropy dissymmetry factors of electronic circular dichroism and circularly polarized luminescence are amplified compared with the corresponding zigzag-type chiral cyclophenylene belts.

Synthesis of Cyclophenacene‐ and Chiral‐Type Cyclophenylene‐Naphthylene Belts

AbstractWe report the synthesis of a [20]cyclophenacene‐type cyclophenylene‐naphthylene (CPN) belt and the enantioselective synthesis of chiral‐type CPN belts (up to >99 %ee) by the cationic rhodium(I)‐catalyzed intramolecular [2+2+2] cycloaddition of naphthalene‐embedded cyclic polyynes. The synthesis of a depth‐expanded CPN belt was also attempted, but the final intramolecular [2+2+2] cycloaddition was unsuccessful. Theoretical calculations clarified that the reactivity depends on the stability of the transition state in the initial oxidative cycloaddition step which is subject to molecular strain. The cylindrical structures of these CPN belts were confirmed by X‐ray crystallographic analyses. As a result of π‐extension through the introduction of naphthalenes in the chiral‐type CPN belts, the anisotropy dissymmetry factors of electronic circular dichroism and circularly polarized luminescence are amplified compared with the corresponding zigzag‐type chiral cyclophenylene belts.

New insights for the catalytic oxidation of cyclohexane to K-A oil

Au-based catalysts have been reported to be active in the cyclohexane oxidation to K-A oil, but they showed some limitiations in terms of productivity, selectivity and required reaction conditions. The possibility to overcome some of these limits has been explored coupling Au with Cu, which can be suitable for undergoing the electron-switch in the initial step of the cyclohexane oxidation. Hence, a bimetallic 2 wt% AuCu/Al2O3 catalyst was tested in the oxidation of cyclohexane, working at mild conditions of 120 °C and 4 bar of O2. The combination of the catalyst with a very small amount of benzaldehyde used as cheaper and non-toxic radical initiator allowed to obtain a very high productivity of cyclohexanol and cyclohexanone (45 mmol*mL/mgmet*h) with a selectivity of 94%. Moreover, comparing the catalysed reaction with the non-catalysed one, the role of the catalyst has been disclosed.

A novel method combining stable isotopic labeling and high-resolution mass spectrometry to trace the quinone reaction products in wines

Quinone formation is a key initial step of wine oxidation. Nucleophiles sacrificially react with quinones to sustain color and aroma, but due to the complexity of wine, determining the identity of the constitutive nucleophile has been challenging. Here we apply a novel stable-isotope labelling approach combined with high-resolution mass spectrometry, using 13C6-labelled ortho-quinone. This allows for the specific detection of quinone reaction products with M and M + 6x peak feature-pairs in real wines. Analysis using MetExtract II successfully identified 225 quinone reaction suspects in negative mode in Sauvignon blanc wine, and 120 in Cabernet Sauvignon. Ten quinone reaction products with the most abundant peak areas were tentatively identified using a mass/structure workflow. It appears that sulfides largely quench quinones in white wines, whereas flavonoids are the dominant reactants in red wines. The latter result demonstrates how skin/seed extraction preserves red wine.

Rates and Yields of Unimolecular Reactions Producing Highly Oxidized Peroxy Radicals in the OH-Induced Autoxidation of α-Pinene, β-Pinene, and Limonene.

Recent ambient atmospheric measurements have detected highly oxygenated organic molecules (HOMs) at many sites and are a consequence of autoxidation processes occurring at ambient temperatures. Monoterpenes in particular have a propensity to autoxidize although they exhibit a wide range of HOM yields, which may be due to a variety of reasons including reactions with different oxidants like OH and O3, differing hydrogen (H) atom transfer or peroxy radical cyclization rates, numbers of available reaction pathways, and/or energy loss processes for activated HO-monoterpene or O3-monoterpene adducts. In this work, the autoxidation mechanisms of (+)-α-pinene, (+)-β-pinene, and (+)-limonene following initial OH oxidation and three successive O2 additions are examined using density functional theory (DFT) to understand what accounts for the disparity. Rates of different potential autoxidation pathways initiated by OH addition or abstraction reactions are quantified using transition-state theory (TST) and master equation approaches using the lowest-energy conformers. OH abstraction reactions do not appreciably influence HOM production in the pinenes and limit autoxidation for limonene because the subsequent autoxidation reactions are slow while OH addition reactions are found to be the main route to HOMs for all three monoterpenes. Generally, faster autoxidation rates are computed in later unimolecular reactions that produce RO7 radicals after OH addition (∼10 s-1 or greater) than rates for RO5 peroxy radical production (0.2-7 s-1). Mechanistic pathways that form RO7 peroxy radicals are similar for all three monoterpenes with a particular bicyclo RO7 radical involving a five-membered peroxide ring being favored for all three monoterpenes. The molar yields of RO7 radicals are 4.6% (+10.0/-2.4), 3.8% (+9.1/-2.6), and 7.6% (+13.1/-4.9) for α-pinene, β-pinene, and limonene, respectively, at 298 K and 1 ppb of NO and only significantly decline at NO concentrations exceeding 10 ppb. The higher yield for limonene relative to the pinenes is predominantly a consequence of the initial oxidation step: OH adducts of the bicyclic pinenes have to use the excess energy after OH addition to break one of the rings and make the molecule more flexible for autoxidation although this process is inefficient, while one of the prominent OH adducts for monocyclic limonene does not have to do this and may add O2 immediately before autoxidizing further. These insights may be used to guide a better representation of these processes in atmospheric models because they affect particulate matter (PM), NOx, and ozone concentrations via enhanced production of low-volatility species, less early-generation NOx cycling, and altered organic nitrate production.

Vacuum ultraviolet free-electron laser photoionization mass spectrometry of alpha-pinene ozonolysis

α-pinene is the most abundant monoterpene that represents an important family of volatile organic compounds. Molecular identification of key transient compounds during the α-pinene ozonolysis has been proven to be a challenging experimental target because of a large number of intermediates and products involved. Here we exploit the recently developed hybrid instruments that integrate aerosol mass spectrometry with a vacuum ultraviolet free-electron laser to study the α-pinene ozonolysis. The experiments of α-pinene ozonolysis are performed in an indoor smog chamber, with reactor having a volume of 2 m3 which is made of fluorinated ethylene propylene film. Distinct mass spectral peaks provide direct experimental signatures of previously unseen compounds produced from the reaction of α-pinene with O3. With the aid of quantum chemical calculations, plausible mechanisms for the formation of these new compounds are proposed. These findings provide crucial information on fundamental understanding of the initial steps of α-pinene oxidation and the subsequent processes of new particle formation.

Solvent- and Base-Free Oxidation of 5-Hydroxymethylfurfural over a PdO/AlPO4-5 Catalyst under Mild Conditions

A solvent-free method was proposed to upgrade the biomass-derived compound 5-hydroxymethylfurfural (HMF). The oxidation of HMF to produce 2,5-furandicarboxylic acid (FDCA) has been examined in the presence of O2 without the addition of solvent and base. Different from the conversion of the aldehyde group on HMF as the initial oxidation step in H2O solvent, the hydroxyl group on HMF was first oxidized and FDCA was finally generated without the addition of solvent. The role of O2 is to replenish the consumption of active oxygen species on the catalyst surface. The oxidation of HMF to FDCA proceeded due to the solvent-free effect. A 83.6% FDCA selectivity at 38.8% HMF conversion was measured with a PdO/AlPO4-5 catalyst at 80 °C for 5 h and the reaction mechanism was proposed.

Role of the solvent in the activation of Li2S as cathode material: a DFT study

Lithium–sulfur batteries are considered one of the possible next-generation energy-storage solutions, but to be commercially available many drawbacks have yet to be solved. One solution with great potentiality is the use of lithium sulfide as cathode material since it can be coupled to Li-free anodes, such as graphite, Si or Sn. Nevertheless, Li2S, like sulfur, is electronically and ionically insulating, with a high activation potential for its initial oxidation step. To overcome this issue, different strategies have been explored, one of them being the use of catalytic surfaces. In the present article, we study using first principles calculations the effect of the dielectric constant of the solvent on the activation energy of the cleavage reaction of Li2S on different catalytic surfaces. To the best of our knowledge, this is the first time that such a study is undertaken. We find that the effect of the solvent should be twofold: on one side, it should decrease the interaction between the Li2S molecule and the surface. On the other side, since the species arising in the dissociation reaction are charged, the solvent should decrease the activation barrier for the dissociation of the Li2S molecule, when compared with the reaction in vacuum. These theoretical findings are discussed in connection with experimental results from the literature, where the behaviour of the Li–S cathode is studied in different solvents.