Initial Charge Transfer Research Articles

(Invited) Influence of Vibronic Interaction of Charge Transfer Excitons in PTB7/BTA-Based Nonfullerene Organic Solar Cells

For the design of rational D/A interfaces, it is important to elucidate the dynamic processes of excitons generated at the D/A stacking structure interface and the photoelectric conversion mechanism. We predict that the charge-transfer excitons initially formed are weakly bound electron-hole polaron pairs, which dissociate without relaxing to the charge-transfer state and diffuse as free electron polarons and hole polarons. We consider this to be a nonadiabatic process due to oscillatory interactions in the initial charge-transfer excitonic state. In this study, we use time-dependent DFT to investigate the electronic structure, electron-hole distance, electron coupling in charge transfer state generated by photoexcitaion and the Huang- Rhys factors of the D/A complex BTAx, PCTBT/BTAx and PDCBT/BTAx (x = 1, 3)) in the excited state and the exciton-phonon coupling and nonadiabatic process. Based on the above, we aim to elucidate the role of vibronic interactions in CT excitonic states and the control of JSC and electron-hole recombination.

Simultaneous organic wastewater treatment and bioelectricity production in a dual chamber microbial fuel cell with Scenedesmus obliquus biocathode

Algal biocathode MFCs (ABMs) are recently being heavily studied due to their advantage over abiotic cathode MFCs (ACMs) as dissolved oxygen (DO) generated by algal growth in the cathodic chamber is directly utilized in cathodic oxidant reduction. In this work growth of pure algae species Scenedesmus obliquus used in the cathode chamber has been studied under a photoperiod of 24 h illumination to supplement oxygen for continual MFC operation without any external supply of air or carbon dioxide and treatment of synthetic wastewater having chemical oxygen demand (COD) equivalent to medium strength domestic wastewater (5.35 g/L COD). Results of ABM showed the highest continuous current density generation of 23.93 mA/m2 and the highest continuous volumetric power density generation of 13.24 mW/m3 were around 120 h with COD removal efficiency of 92.52 % and coulombic efficiency (CE) of 41.88 %. Initial ohmic (Roh) and charge transfer (Rct) resistance values of ABM were found to be 8.3 Ω and Rct of 22.5 Ω which after 216 h of algal growth got reduced to 1 Ω and 15.1 Ω respectively. 16S microbiome profiling of the mixed microbial sludge inoculum used in the anodic chamber showed dominance of Xanthomonadaceae stenotrophomonas (9.7 %), Chitinophaga flexibacter (8.65 %), Sphingomonadaceae sphingomonas (6.82 %), Sphingobacterium multivorum (6.55 %), Dyadobacter fermentans (6.05 %), and Alcaligenaceae achromobacter (5.51 %). Elemental investigation of the bioanode’s and biocathode’s surface carried out using EDS analysis also shows that oxygen was generated in the cathodic chamber by pure Scenedesmus obliquus species.

Excited Charge Transfer Promoted Electron Transfer in all Perylenediimide Derived, Wide-Band Capturing Conjugates: A Mimicry of the Early Events of Natural Photosynthesis.

Fundamental discoveries in electron transfer advance scientific and technological advancements. It is suggested that in plant and bacterial photosynthesis, the primary donor, a chlorophyll or bacteriochlorophyll dimer, forms an initial excited symmetry-breaking charge transfer state (1CT*) upon photoexcitation that subsequently promotes sequential electron transfer (ET) events. This is unlike monomeric photosensitizer-bearing donor-acceptor dyads where ET occurs from the excited donor or acceptor (1D* or 1A*). In the present study, we successfully demonstrated the former photochemical event using an excited charge transfer molecule as a donor. Electron-deficient perylenediimide (PDI) is functionalized with three electron-rich piperidine entities at the bay positions, resulting in a far-red emitting CT molecule (DCT). Further, this molecule is covalently linked to another PDI (APDI) carrying no substituents at the bay positions, resulting in wide-band capturing DCT-APDI conjugates. Selective excitation of the CT band of DCT in these conjugates leads to an initial 1DCT* that undergoes subsequent ET involving APDI, resulting in DCT +-APDI - charge separation product (kCS~109 s-1). Conversely, when APDI was directly excited, ultrafast energy transfer (ENT) from 1APDI* to DCT (kENT~1011 s-1) followed by ET from 1DCT* to PDI is witnessed. While increasing solvent polarity improved kCS rates, for a given solvent, the magnitude of the kCS values was almost the same, irrespective of the excitation wavelengths. The present findings demonstrate ET from an initial CT state to an acceptor is key to understanding the intricate ET events in complex natural and bacterial photosynthetic systems possessing multiple redox- and photoactive entities.

Doping/breath figure method triggered reversible diethylchlorophosphate vapor sensing

Aggregation-caused quenching (ACQ) is the key reason why thin-film fluorescence sensing studies have lagged. A facile two-step strategy combining doping with breath figure method (BF) is capable to suppress the ACQ effect without sacrificing the sensing property of the molecule. In this work, two long-wavelength fluorescent probes, Me4BOPHY-1 and Me4BOPHY-2, were synthesized by introducing one or two diethylaminophenyl group in the α-position of Me4BOPHY. Upon addition diethylchlorophosphate (DCP) to the solution of the probes, the initial intramolecular charge transfer (ICT) process is restrained. Thus, the intense fluorescence from Me4BOPHY core was released together with a dramatical color change. As the typical ACQ probes, Me4BOPHY-1 and Me4BOPHY-2 can’t be used in vapor-detection directly due to their weak fluorescence in the solid-phase. By means of being doped with polystyrene solution and being spin-coated under the optimal relative humidity conditions, porous films for DCP vapor detection were prepared with a high detection performance of a 162-ppb low detection limit. Moreover, it is exciting that these films show two outstanding characters of anti-interference to HCl gas and reversibility, which have not been reported in previous studies. This work breaks the application boundary of ACQ materials and provides an inspiration for the development of thin-film fluorescence sensors.

Test of the orbital-based LI3 index as a predictor of the height of the [formula omitted]MLCT [formula omitted][formula omitted]MC transition-state barrier for gas-phase [Ru(N[formula omitted]N)[formula omitted]][formula omitted] polypyridine complexes

Ruthenium(II) polypyridine compounds often luminesce, with ligand-dependant lifetimes. This is the third in a series of papers devoted to finding orbital-based luminescence indices (LI) for predicting luminescence lifetimes. The third attempt (LI3) was based upon a frontier molecular orbital (FMO) like estimate of the height of the barrier to conversion from an initial phosophorescent triplet metal-ligand charge transfer (3MLCT) state to a nonluminescent triplet metal-centered (3MC) state which decays nonradiatively. A linear correlation was found between LI3 and extracted empirical average 3MLCT →3MC transition state (TS) barrier heights (Eaves) which were not believed to be quantitative but which were believed to capture the trends in the true barrier heights correctly. As it is known that Eave is a large underestimate of the true 3MLCT →3MC TS barrier height in the case of the trisbipyridine ruthenium(II) cation { [Ru(bpy)3]2+ }, but accurate TS barrier heights are difficult to obtain experimentally, it was judged useful to verify the ideas used to derive the LI3 index in the present work by calculating the energetics of the gas-phase 3MLCT →3MC reaction for a series of ruthenium(II) tris bipyridine complexes using the same density functional and basis sets used in calculating LI3. Specifically, four closely-related bipyridine complexes { [Ru(N∧N)3]2+ with N∧N = bpy (6), 4,4’-dm-bpy (70), 4,4’-dph-bpy (73), and 4,4’-DTB-bpy (74) } were used for these calculations. In the process, we examined the gas-phase trans dissociation mechanism in greater detail than has been previously done and uncovered a two part mechanism. In the first part, the electron is transferred to a single ligand rather than symmetrically to all three ligands. It is the two Ru-N bonds to this ligand which are equally elongated in the transition state. The intrinsic reaction coordinate then continues down a ridge in hyperspace and bifurcates into one of two symmetry-equivalent 3MC structures with elongated trans bonds. Interestingly, no significant difference is found for the TS barriers for the four complexes treated here. Instead, LI3 is linearly correlated with the energy difference ΔE=E(3MLCT)−E(3MC), different from what was originally intended but still consistent with the FMO arguments underlying the derivation of LI3.

Hidden phonon highways promote photoinduced interlayer energy transfer in twisted transition metal dichalcogenide heterostructures.

Vertically stacked van der Waals (vdW) heterostructures exhibit unique electronic, optical, and thermal properties that can be manipulated by twist-angle engineering. However, the weak phononic coupling at a bilayer interface imposes a fundamental thermal bottleneck for future two-dimensional devices. Using ultrafast electron diffraction, we directly investigated photoinduced nonequilibrium phonon dynamics in MoS2/WS2 at 4° twist angle and WSe2/MoSe2 heterobilayers with twist angles of 7°, 16°, and 25°. We identified an interlayer heat transfer channel with a characteristic timescale of ~20 picoseconds, about one order of magnitude faster than molecular dynamics simulations assuming initial intralayer thermalization. Atomistic calculations involving phonon-phonon scattering suggest that this process originates from the nonthermal phonon population following the initial interlayer charge transfer and scattering. Our findings present an avenue for thermal management in vdW heterostructures by tailoring nonequilibrium phonon populations.

β-Pyrrole Functionalized Push or Pull Porphyrins: Excited Charge Transfer Promoted Singlet Oxygen Generation.

Singlet oxygen (1O2) producing photosensitizers are highly sought for developing new photodynamic therapy agents and facilitating 1O2-involved chemical reactions. Often singlet oxygen is produced by the reaction of triplet-excited photosensitizers with dioxygen via an energy transfer mechanism. In the present study, we demonstrate a charge transfer mechanism to produce singlet oxygen involving push or pull functionalized porphyrins. For this, 20 β-pyrrole functionalized porphyrins carrying either an electron-rich push or electron-deficient pull group have been newly synthesized. Photoexcitation of these push-pull porphyrins has been shown to produce high-energy MPδ+-Aδ- or MPδ--Dδ+ charge transfer states. Subsequent charge recombination results in populating the triplet excited states of extended lifetimes in the case of the push group containing porphyrins that eventually react with dioxygen to produce the reactive singlet oxygen of relatively higher quantum yields. The effect of the push and pull groups on the porphyrin periphery in governing initial charge transfer, the population of triplet excited states and their lifetimes, and resulting in improved singlet oxygen quantum yields are systematically probed. The improved performance of 1O2 generation by porphyrins carrying push groups is borne out from this study.

Combining PEDOT:PSS Polymer Coating with Metallic 3D Nanowires Electrodes to Achieve High Electrochemical Performances for Neuronal Interfacing Applications.

This study presents a novel approach to improve the performance of microelectrode arrays (MEAs) used for electrophysiological studies of neuronal networks. The integration of 3D nanowires (NWs) with MEAs increases the surface-to-volume ratio, which enables subcellular interactions and high-resolution neuronal signal recording. However, these devices suffer from high initial interface impedance and limited charge transfer capacity due to their small effective area. To overcome these limitations, the integration of conductive polymer coatings, poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is investigated as a mean of improving the charge transfer capacity and biocompatibility of MEAs. The study combines platinum silicide-based metallic 3D nanowires electrodes with electrodeposited PEDOT:PSS coatings to deposit ultra-thin (<50 nm) layers of conductive polymer onto metallic electrodes with very high selectivity. The polymer-coated electrodeswerefully characterized electrochemically and morphologically to establish a direct relationship between synthesis conditions, morphology, and conductive features. Results show that PEDOT-coated electrodes exhibit thickness-dependent improved stimulation and recording performances, offering new perspectives for neuronal interfacing with optimal cell engulfment to enable the study of neuronal activity with acute spatial and signal resolution at the sub-cellular level.

Photo-Uncaging by C(sp3)-C(sp3) Bond Cleavage Restores β-Lapachone Activity.

β-Lapachone is an ortho-naphthoquinone natural product with significant antiproliferative activity but suffers from adverse systemic toxicity. The use of photoremovable protecting groups to covalently inactivate a substrate and then enable controllable release with light in a spatiotemporal manner is an attractive prodrug strategy to limit toxicity. However, visible light-activatable photocages are nearly exclusively enabled by linkages to nucleophilic functional sites such as alcohols, amines, thiols, phosphates, and sulfonates. Herein, we report covalent inactivation of the electrophilic quinone moiety of β-lapachone via a C(sp3)-C(sp3) bond to a coumarin photocage. In contrast to β-lapachone, the designed prodrug remained intact in human whole blood and did not induce methemoglobinemia in the dark. Under light activation, the C-C bond cleaves to release the active quinone, recovering its biological activity when evaluated against the enzyme NQO1 and human cancer cells. Investigations into this report of a C(sp3)-C(sp3) photoinduced bond cleavage suggest a nontraditional, radical-based mechanism of release beginning with an initial charge-transfer excited state. Additionally, caging and release of the isomeric para-quinone, α-lapachone, are demonstrated. As such, we describe a photocaging strategy for the pair of quinones and report a unique light-induced cleavage of a C-C bond. We envision that this photocage strategy can be extended to quinones beyond β- and α-lapachone, thus expanding the chemical toolbox of photocaged compounds.

Two-Dimensional Electronic Spectroscopy Reveals Vibrational Modes Coupled to Charge Transfer in a Julolidine-BODIPY Dyad.

Understanding charge transfer (CT) dynamics in molecular donor-acceptor (D-A) dyads can provide insight into developing efficient D-A molecules for capturing solar energy. Here, we characterize the excited-state evolution of a julolidine-BODIPY (Jul-BD) D-A system with an emissive CT state using time-resolved fluorescence, femtosecond transient absorption, and two-dimensional electronic spectroscopies. Comparison of these results with those from phenyl-BODIPY (Ph-BD) allows us to identify the dynamics at play during CT state formation and its subsequent conversion to either a fully charge-separated or triplet state. Photoexcitation of Jul-BD in tetrahydrofuran results in the formation of an initial emissive CT state that relaxes before fully charge-separating. In contrast, Jul-BD in toluene exhibits similar CT state dynamics, albeit at slower timescales, before decaying to a terminal triplet species. Quantum beat analysis at early times in both solvents shows several vibronic modes, which are corroborated using density functional theory (DFT) calculations. For Ph-BD, a single 220 cm-1 compression mode about the single bond linking the phenyl to BODIPY modulates their orbital overlap. Three active vibronic modes, 147, 174, and 214 cm-1, are found in Jul-BD, regardless of the dielectric constant of the medium. These motions correspond to compression and torsional motions along the single bond joining Jul to BD and are responsible for the evolution of the spontaneous and stimulated emission features in the time-resolved spectroscopic data, which is further supported by time-dependent DFT calculations of the steady-state absorption spectrum of the Jul-BD as a function of increasing D-A dihedral core angle. These findings show how torsional and compression motions can play a pivotal role in intramolecular CT between a D and an A linked by a single bond.

Intraligand Charge Transfer Enables Visible-Light-Mediated Nickel-Catalyzed Cross-Coupling Reactions.

We demonstrate that several visible-light-mediated carbon-heteroatom cross-coupling reactions can be carried out using a photoactive NiII precatalyst that forms in situ from a nickel salt and a bipyridine ligand decorated with two carbazole groups (Ni(Czbpy)Cl2 ). The activation of this precatalyst towards cross-coupling reactions follows a hitherto undisclosed mechanism that is different from previously reported light-responsive nickel complexes that undergo metal-to-ligand charge transfer. Theoretical and spectroscopic investigations revealed that irradiation of Ni(Czbpy)Cl2 with visible light causes an initial intraligand charge transfer event that triggers productive catalysis. Ligand polymerization affords a porous, recyclable organic polymer for heterogeneous nickel catalysis of cross-coupling reactions. The heterogeneous catalyst shows stable performance in a packed-bed flow reactor during a week of continuous operation.

Intraligand Charge Transfer Enables Visible‐Light‐Mediated Nickel‐Catalyzed Cross‐Coupling Reactions**

AbstractWe demonstrate that several visible‐light‐mediated carbon−heteroatom cross‐coupling reactions can be carried out using a photoactive NiII precatalyst that forms in situ from a nickel salt and a bipyridine ligand decorated with two carbazole groups (Ni(Czbpy)Cl2). The activation of this precatalyst towards cross‐coupling reactions follows a hitherto undisclosed mechanism that is different from previously reported light‐responsive nickel complexes that undergo metal‐to‐ligand charge transfer. Theoretical and spectroscopic investigations revealed that irradiation of Ni(Czbpy)Cl2 with visible light causes an initial intraligand charge transfer event that triggers productive catalysis. Ligand polymerization affords a porous, recyclable organic polymer for heterogeneous nickel catalysis of cross‐coupling reactions. The heterogeneous catalyst shows stable performance in a packed‐bed flow reactor during a week of continuous operation.

Polyaniline encapsulated Ti-MOF/CoS for efficient photocatalytic hydrogen evolution

We report the study of conductive polyaniline (PANI) chain embedded Ti-MOF functionalized with CoS as a cocatalyst for hydrogen evolution reaction (HER) application. The post synthetically modified hybrid photocatalyst PANI/Ti-MOF/CoS greatly influences the redox and e− − h+ separation process and exhibits an impressive rate of HER (∼1322 μmol h−1g−1), suppressing the pristine Ti-MOF (∼62 μmol h−1g−1) with apparent quantum yield (AQY) of ∼3.2 and transient current response of ∼46.4 μA cm−2. In this system, Ti-MOF provides the circulation of Ti3+ and Ti4+ to the reaction of photocatalytic H2 generation, where the additional PANI and CoS amended the performance of H2 production through electron enrichment and thereby improving the stability and integrity of Ti-MOF. The Electrochemical studies demonstrated increased photocurrent by interweaving Ti-MOF crystal with PANI through cation-π interaction thereby enhancing interface connection and then promoting electron transfers. The charge dynamics revealed the initial charge transfer from photoexcited PANI to encapsulated MOF framework to boost the photocatalytic performance of the system. Further, the electron movement at the Ti-MOF/CoS interface is investigated through work function and electrochemical potential of electrons (Fermi level). DFT results demonstrate the importance of CoS in improving the photocatalytic performance of hybrid Ti-MOF catalyst, which leads to superior catalytic behaviour. These results establish that the encapsulation of catalytic active sites inside MOFs with desirable energy band gaps would be an ideal choice for the production of solar fuels.

Charge transfer vs. proton transfer in the excited-state dynamics of biomimetic pyranoflavylium cations

Pyranoflavylium cations are synthetic analogues of pyranoanthocyanin, colored pigments, formed from grape anthocyanins during the maturation of red wines. Studies of a series of monosubstituted pyranoflavylium cations, ranging from methoxy (PF+-OMe) to cyano (PF+-CN), have shown that they display fluorescence and form triplet states that sensitize singlet oxygen formation in acidified acetonitrile. In alcohol-water mixtures, they behave as photoacids, undergoing adiabatic excited state proton transfer (ESPT) to water on a picosecond timescale, as confirmed in this report by femtosecond pump-probe spectroscopy. In contrast, the corresponding dimethylamino substituted pyranoflavylium cation (PF+-NMe2) is virtually non-fluorescent under the same conditions and exhibits a long-wavelength absorption band that has been attributed to a charge-transfer (CT) transition. Indeed, pump-probe spectroscopy of PF+-NMe2 in acidified acetonitrile shows ultrafast (<1 ps) formation of a CT state that decays back to the ground state with a 12–13 ps lifetime. In acidified methanol, the initial Franck-Condon CT state (ca. 3 ps lifetime) converts to a 13 ps lifetime CT state analogous to that in acetonitrile. In 50:50 ethanol:water and 30:70 methanol:water mixtures, PF+-NMe2 exhibits a short-lived (3–8 ps) initial CT state, an intermediate lifetime (30 ps) CT state and a much longer lived (130 ps) species attributed to a twisted intramolecular CT state. Thus, in addition to demonstrating that the photophysics of PF+-NMe2 is dominated by CT rather than ESPT, pump-probe spectroscopy provides details of the solvent-dependent dynamics of the CT decay pathways.

Charge Transfer in Ternary Solar Cells Employing Two Fullerene Derivatives: Where do Electrons Go?

AbstractEarlier reports demonstrated that ternary organic solar cells (OSC) made of donor polymers (D) blended with different mixtures of fullerene acceptors (A : A) performed very similarly. This finding is surprising, as the corresponding fullerene LUMO levels are slightly different, which might result in decisive differences in the charge transfer step. We investigate ternary OSC (D : A : A) made of the donor polymer P3HT with stoichiometric mixtures of different fullerene derivatives, PC60BM : PC70BM and PC70BM : IC60BA, respectively. Using quantitative electron paramagnetic resonance (EPR) we can distinguish between positive and negative polarons, localized on the specific molecules. We found that after the initial charge transfer step, the electrons are re‐distributed over two nearby acceptors in agreement with their stoichiometry and their relative LUMO energy difference. Remarkably, the measured ΔLUMO differences in fullerene mixtures are reduced by an order of magnitude compared to that of the pristine materials, i. e., below 1 meV for PC60BM : PC70BM and (20±5) meV for PC70BM : IC60BA. Furthermore, we found that this reduced ΔLUMO explains the shift in open circuit voltage for D : A : A organic solar cells. We attribute these findings to hybridization, leading to an effective fullerene LUMO. Consequently, multi‐acceptor blends are indeed a viable option for photodetectors and solar cells, as they combine the best electron acceptor and light absorbing properties.

Identifying the Intermediate Free-Carrier Dynamics Across the Charge Separation in Monolayer MoS2/ReSe2 Heterostructures.

Van der Waals heterostructures composed of different two-dimensional films offer a unique platform for engineering and promoting photoelectric performances, which highly demands the understanding of photocarrier dynamics. Herein, large-scale vertically stacked heterostructures with MoS2 and ReSe2 monolayers are fabricated. Correspondingly, the carrier dynamics have been thoroughly investigated using different ultrafast spectroscopies, including Terahertz (THz) emission spectroscopy, time-resolved THz spectroscopy (TRTS), and near-infrared optical pump-probe spectroscopy (OPPS), providing complementary dynamic information for the out-of-plane charge separation and in-plane charge transport at different stages. The initial charge transfer (CT) within the first 170 fs, generating a transient directional current, is directly demonstrated by the THz emissions. Furthermore, the TRTS explicitly unveils an intermediate free-carrier relaxation pathway, featuring a pronounced augmentation of THz photoconductivity compared to the isolated ReSe2 layer, which likely contains the evolution from immigrant hot charged free carriers to bounded interlayer excitons (∼0.7 ps) and the surface defect trapping (∼13 ps). In addition, the OPPS reveals a distinct enhancement in the saturable absorption along with long-lived dynamics (∼365 ps), which originated from the CT and interlayer exciton recombination. Our work provides comprehensive insight into the photocarrier dynamics across the charge separation and will help with the development of optoelectronic devices based on ReSe2-MoS2 heterostructures.

Solar Energy Conversion Schemes: Photon- and Charge-Management

In Nature, energy and electron transfer processes in the photosynthetic machinery following light absorption have been perfectionated. To mimic the aforementioned, that is, efficiently utilizing light to separate charges and, in turn, to generate solar fuels, a great variety of multicomponent artificial photosynthetic systems have been designed and synthesized. Incentives for the design build around molecules have been taken from Nature: For example, implementing suitable electrochemical gradients across arrays of several molecular building blocks have enabled the unidirectional transformation of solar energy into electrical energy. A key parameter is the right balance between the reduction / oxidation strengths of the individual building blocks and their spatial arrangements. Both affect the thermodynamic driving forces for each step and, in turn, the overall efficiency. Notably, acceptor-donor1-donor2 or acceptor-donor1-donor2-donor3 types of artificial photosynthetic systems have been reported. Besides an initial charge transfer, charge shifts take place via oxidative electron transfers from donor1 to donor2 and, eventually, to donor3.Considering the effectiveness of multicomponent systems, in which photoexcitation triggers a cascade of short range electron transfers, we report on two sets of novel multicomponent DA1A2s – Figure 2. These DA1A2 types feature electron transport chains with C60 and C70 of different electron acceptor strengths to create an electrochemical gradient. As a complement to electron accepting C60 / C70 either zinc porphyrins (ZnP) and zinc phthalocyanines (ZnPc) were employed. The motivation for our pump-probe investigations was to establish the role of ZnPc or ZnP as light harvester and electron donor to power unidirectional (reductive) charge shift reactions along a variety of electron transport chains.In summary, we will demonstrate the control over unidirectional charge shift along electron transport chains en route towards highly energetic, long-lived charge separated states. Key is, however, a charge shift mediating state, whose relative energy determines the overall efficiency. If the energy of the mediating state, on one hand, is higher than the charge separated state, resonance conditions enable efficiencies as high as 50%. If the energy, on the other hand, is lower than the charge separated state, deactivation to the ground state limits the efficiency to 10%.

Oxidative Damage of S‐Containing Amino Acids by the Environmental Radical NO3.: A Kinetic, Product and Computational Study

AbstractMethionine, cysteine and cystine, which were acetylated at the N‐terminus and methylated at the C‐terminus, react rapidly with the environmental nitrate radical (NO3.) with rate coefficients of 7.7×109, 3.4×109 and 2.0×109 M−1 s−1, respectively, in acetonitrile. Methionine (Ac−Met−OMe) is successively oxidized via the sulfoxide (Ac−MetO−Me) to the sulfone (Ac−MetO2−OMe), with the latter step being also extremely fast with a rate coefficient of 1.2×109 M−1 s−1. Computations predict formation of an initial charge transfer complex between NO3. and the S or SO moiety in Ac‐Met‐OMe, Ac‐MetO‐OMe and cystine (Ac−Cys(S−S)Cys‐OMe), respectively, which is followed by simultaneous S−O bond formation and NO2. expulsion. Calculations for the reaction of cysteine (Ac‐Cys‐OMe) with NO3. revealed side‐chain oxidation to give a thiyl radical or a sulfenic acid as likely pathways. These findings highlight the potential harmful impact of NO2./O3 pollution on S‐containing amino acid residues in peptides.

Strong Electronic Coupling-Induced Ultrafast Charge Transfer in Donor-Pyrene-Acceptor Systems.

In this study, we decipher the charge transfer (CT) processes in donor-pyrene-acceptor (DPA) molecules via various time-resolved spectroscopic measurements. It has been challenging to unravel the ultrafast CT dynamics in DPA molecules because they exhibit an initial CT emission in the same spectral range as the locally excited (LE) emission. However, we finally observed the CT rate of ∼200 fs in DPA molecules from the time-resolved fluorescence anisotropy decay profiles. Our measurements allow us to suggest that the LE and CT states of DPA systems have isoenergetic potential surfaces and that the introduction of the acceptor to the pyrene moiety gives rise to strong electronic coupling between the LE and CT states. Therefore, we determined that this solvent-independent ultrafast CT occurs through the adiabatic potential energy surface and that the CT characteristics are enhanced in DPA compared to the donor-pyrene-donor system.

Optimisation of discharge characteristics on fully screen-printed Zn|MnO2 batteries by electrode rearrangement

Electrical and electrochemical performance parameters of fully screen-printed primary zinc–manganese dioxide (Zn|MnO2) batteries were optimised by a simple electrode-rearrangement. Galvanostatic electrochemical impedance spectroscopy measurements were used to study the effect of an increased electrode interfacial area on battery impedances. Initial charge transfer resistances could be decreased from 150 Ω to 50 Ω. Constant current discharge experiments revealed maximum areal capacities on same scale (2.4–2.6 mAh cm−2) but improved voltage stability on optimised coplanar battery layouts. The rearrangement of electrodes enables screen printing of thin film batteries with improved discharge profiles, increased current rate capability, and reduced internal impedances.