Algal Growth Inhibition Research Articles

A multi-disciplinary approach based on chemical characterization of foreshore sediments, ecotoxicity assessment and statistical analyses for environmental monitoring of marine-coastal areas

The present work aims at providing a multi-disciplinary approach for environmental monitoring in marine-coastal areas. A monitoring campaign of 13 months (October 2022–October 2023) was carried out on sandy foreshore sediments (SFSs). The SFSs were analysed for potentially toxic elements (PTEs) and rare earth elements (REEs) content determination. In the investigated area, variable contamination trends were assessed through Friedman and Nemenyi tests. Further results also indicated the usefulness of statistical data elaboration in the identification of potential contamination sources. In fact, from Spearman test, significant positive correlations (between 0.650 and 0.981) were observed among PTEs of possible anthropogenic origin (such as Co, Cr, Cu, Pb, V, and Zn). For REEs, La and Nd showed strong correlations with Ce (0.909 and 0.920, respectively). The study also integrated luminescence inhibition (Aliivibrio fischeri), algal growth inhibition (Phaeodactylum tricornutum), and embryotoxicity assessment (Paracentrotus lividus) on sediment elutriates showing varying degrees of toxicity. Also these data were analysed through statistics in order to highlight possible correlations between contaminants and observed ecotoxicological effects on the involved bioindicators. The results outline an approach useful for more comprehensive monitoring of marine areas quality and identification of suitable environmental restoration strategies.

Potansiyel bisphenol-A ikameleri sucul yaşam için gerçekten güvenli mi? Birincil üreticiler üzerindeki etkisi

Bisphenol A threat to environmental health and human health and has been added to the Candidate List as Very High Concern Substances by the European Chemicals Agency. This led to the replacement of bisphenol A (BPA) with bisphenol analogues, which were considered "safer". However, there are very few scientific studies on the impact of BPA analogues on the environment. In this study, three analogues bisphenol B (BPB), bisphenol A diglycidyl ether (BADGE) and bisphenol F diglycidyl ether (BFDGE) were selected to investigate their ecotoxicological effects on the marine phytoplankton species Phaeodactylum tricornutum, which is representative of primary producers. Phaeodactylum tricornutum was exposed to different concentrations (0.5, 0.8, 1.0, 1.5, 2.0 mg/L) of BPB, BADGE and BFDGE analogues for 72 hours and the toxicity values of three BPA analogues were calculated by OECD 201 algal growth inhibition assay (IC50/EC50). In the light of the data obtained, algal growth inhibition (IC50/EC50) values for marine phytoplankton Phaeodactylum tricornutum were determined as 3.91 mg-BPA/L, 7.83 mg-BPB/L, 5.69 mg-BFDGE/L, 11.71 mg-BADGE/L. The results revealed that BPB, BFDGE and BADGE showed lower toxicity to Phaeodactylum tricornutum compared to BPA algal growth inhibition (3.91 mg-BPA/L). Therefore, it is necessary to share the results of the adverse effects of BPA analogues on aquatic organisms and to conduct ecotoxicological risk assessments.

Benzophenone-4 inhibition in marine diatoms: Physiological and molecular perspectives

Benzophenone-4 (BP-4), a widely utilized organic ultraviolet (UV) filter, is recognized as a pseudo-persistent contaminant in aquatic environments. To elucidate the effects and mechanisms of BP-4 on marine diatoms, an investigation was conducted on the growth rate, photosynthetic pigment content, photosynthetic parameters, antioxidant enzyme activity, malondialdehyde (MDA) levels, cellular structure, and transcriptome profile of the model species, Phaeodactylum tricornutum. The results showed a pronounced inhibition of algal growth upon exposure to BP-4, with a 144 h-EC50 value of 201 mg·L−1. In addition, BP-4 exposure resulted in a significant reduction in biomass, disruption of cell membrane integrity, and increased MDA accumulation, with levels escalating 3.57-fold at 125 mg·L−1 of BP-4. In the BP-4-treated samples, 1556 differentially expressed genes (DEGs) were identified, of which 985 were upregulated and 571 were downregulated. Gene ontology and KEGG pathway enrichment analysis revealed that the carbon fixation and carbon metabolism processes in P. tricornatum were disrupted in response to BP-4 exposure, along with excessive reactive oxygen species (ROS) production. The upregulation of genes associated with photosynthetic pigment (chlorophyll and carotenoids) synthesis, phospholipid synthesis, ribosome biogenesis, and translation-related pathways may be regarded as a component of P. tricornatum's tolerance mechanism towards BP-4. These results provide preliminary insights into the toxicity and tolerance mechanisms of BP-4 on P. tricornatum. They will contribute to a better understanding of the ecotoxicological impacts of BP-4 on the marine ecosystem and provide valuable information for elimination of BP-4 in aquatic environment by bioremediation.

Impact of weathered and virgin polyethylene terephthalate (PET) micro- and nanoplastics on growth dynamics and the production of extracellular polymeric substances (EPS) of microalgae

The ever-increasing plastic waste accumulation in the marine environment necessitates a deeper understanding of microalgae interactions with micro- and nanoplastics (MNP), and the role of extracellular polymeric substances (EPS). EPS, known for its adhesive properties and produced as an algal stress response, may facilitate aggregation of both algae and MNPs, thereby impacting ecological and hydrodynamic processes such as the trophic transfer or vertical transport of MNPs. Moreover, gaining a deeper understanding of the impact of weathering processes on the potential toxicological effects of plastic particles, and the comparative significance of plastic-specific effects relative to those of naturally occurring particles such as kaolin clay, is imperative. Therefore, this study investigated the impact of fragmented, polydisperse virgin polyethylene terephthalate (PET, Daverage = 910 nm) and weathered PET (Daverage = 1700 nm) on the growth and the production of EPS of Rhodomonas salina. Algae were exposed to a range of low MNP concentrations (10, 100 and 1000 and 10,000 MNPs ml-1) for 11 days. A natural particle control (kaolin, Daverage = 1600 nm) was deployed to differentiate particle effects from plastic effects. It was observed that exposure to both weathered PET and virgin PET resulted in initially increased growth rates (7.80 % and 7.28 % respectively), followed by significant decreases in algae cell density (−30.1 % and −11.2 % respectively). Furthermore, exposure to weathered PET caused a simultaneous elevation in cellular EPS production (76.51 %). The effects of plastics were significantly larger than the effect of kaolin. Also, the observed effects were amplified by the weathering of the plastics. These observations underscore the interactions between particle type, age and concentration, and their distinct impacts on algae density and growth inhibition. The observations indicate a role for EPS as an algal protection mechanism, potentially affecting the environmental fate of MNP – microalgae aggregates.

Systematization of a toxicity screening method based on a combination of chemical analysis and the delayed fluorescence algal growth inhibition test for use in emergency environmental surveys.

In recent years, heavy rainfall disasters linked to climate change have become more frequent, raising concerns about the release of chemicals stored in factories. Assessing chemical contamination during such emergencies therefore necessitates the development of a quick and easy method for evaluating hazardous contaminants in combination with toxicity testing. This study proposes a "toxicity screening" method that combines biological response testing and chemical analysis to systematically evaluate hazardous contaminants in emergency situations. The toxicity screening method evaluates the water quality in three steps, including water quality measurements and a delayed fluorescence (DF) assay, metal content measurements and a DF assay, and targeted screening analysis and a DF assay. The efficacy of this method was tested using industrial wastewater from 14 locations. Seven of the samples were non-toxic, while the other seven samples were toxic, displaying no observed effect concentration (NOEC) values ranging from 0.625 to 20%. Two toxic samples in the first phase possessed high total chlorine concentrations (0.4mg L-1) and conductivities (2200 mS m-1), indicating that the main sources of toxicity were residual chlorine and a high salt concentration. In the second phase, metal content analysis identified metals as the toxicity cause in four samples. In the third phase, the organic contaminants were analyzed, and tri-n-octyl phosphate (TNOP) was detected at a concentration of 0.00027mg L-1. The results of solid-phase extraction experiments and exposure tests with TNOP alone indicated that the contribution of TNOP to the toxicity was negligible and that chemicals not adsorbed on the solid-phase extraction cartridges were the cause of toxicity. The proposed method can therefore be considered effective for disaster-related water quality assessment, delivering results within 12days.

Inhibitory Effect of Combined Exposure to Copper Ions and Polystyrene Microplastics on the Growth of Skeletonema costatum

As two significant pollutants, the increased concentrations of copper ions and microplastics in coastal waters pose a substantial threat to the health of marine ecosystems. This study explored the individual and combined toxic effects of copper ions and microplastics on the marine diatom Skeletonema costatum. The results indicated that copper ions at a concentration of 0.05 mg/L exerted a negative impact on the growth of S. costatum; however, the influence of microplastics on algal cell growth was more complex: there was no significant inhibition of algal cell growth observed within the first 72 h of cultivation, but a pronounced negative effect on cell growth was noted between 72 and 96 h, with high concentrations (10.00 mg/L) of microplastics even causing a premature stagnation phase in algal cell growth. When both pollutants were present simultaneously, their impact on cell growth was similar to that of the microplastic pollution group, yet the growth condition was better than that of the copper ion pollution group. Through investigation of adsorption rates and toxicity mitigation rates, it was found that the adsorption of copper ions by microplastics was a significant reason for the improved growth condition of algal cells in the mixed pollution group compared to the copper ion pollution group. However, in the later stages of cultivation, the inhibitory effect of microspheres on algal cell growth counteracted their mitigating effect on copper ion toxicity. This study provides a reference for evaluating the impact of microplastics and heavy metals on coastal ecosystem health and for revealing the interactions between different pollutants.

Effects of Non-steroidal Anti-inflammatory Drugs (Ibuprofen and Diclofenac) and Their Mixtures on the Growth of Three Green Algae

Ibuprofen (IBU) and diclofenac (DFN) are the most widely consumed non-steroidal anti-inflammatory (NSAIDs) worldwide. Since they are not completely metabolized in the human body, the unaltered active ingredients can reach aquatic ecosystems through domestic effluents. The aim of this study was to analyse the toxic effects of IBU and DFN, individually and in mixtures, on three freshwater green algae strains, the international standard strain Raphidocelis subcapitata and two native strains, Ankistrodesmus fusiformis and Tetradesmus obliquus. Bioassays were carried out according to the 72-h algal growth inhibition test. The concentration-response curve of the mixture was compared to predicted effects based on both the concentration addition (CA) and the independent action (IA) models. The two drugs tested individually were toxic to all three algal strains, with EC50 values <100 mg L-1. According to these values, the most sensitive strain was R. subcapitata (IBU = 20 mg L-1 and DFN = 8 mg L-1). The most resistant strain was T. obliquus (IBU = 74.1 mg L-1 and DFN = 92.7 mg L-1) and the A. fusiformis strain showed intermediate sensitivity (IBU = 26.7 mg L-1 and DFN = 14.6 mg L-1). The mixtures showed a synergistic effect on R. subcapitata, an additive effect on A. fusiformis, and an antagonistic effect on T. obliquus. Neither the CA nor the IA model was appropriate for predicting the toxicity of the mixtures. In conclusion, IBU and DFN showed toxic effects on the algae growth at the concentrations tested. Individual and mixed toxicity was different according to the species. These differences could be species-specific, showing the importance of including native strains in ecotoxicological studies to evaluate the potential effects of pollutants in regional aquatic environments.

Controlling algal growth using ultrasonic technology and conceptual implementation in the real-life system

ABSTRACT The present work reports a study on the interactive response of algae and other microorganisms coexisting in a natural water body to ultrasonic treatment for effective algal growth inhibition using ultrasonic treatments. The cellular damage caused by treatment was also visualised through SEM imaging. For an ultrasonic exposure of 10–30 min at 30 kHz frequency with ultrasonic power dissipated in the range of 4.2–12.5 W, the reduction in the algal cell density was changed from 37.82 to –52.73% after 7 days of observation period. The gradual decrease in the chlorophyll concentration signified the reduced photosynthetic activity after treatment. The damage created on the cell membrane by ultrasound was evaluated through the increased permeability of electrolytes from the cells and the rise in the conductivity of water. Following the lab-scale experimental studies and interpretation of the results obtained, field trials were carried out at a local natural pond (40*35 sq. metre) for 6 months and secondary clarifier in a local industry (20 m diameter) for 2 months, with some system working based on low power ultrasonic transmitters (power ∼ 25 W/h and frequency 20–40 kHz) and promising improvement in water quality could be observed with 85% and more than 95% algae removal efficiency, respectively.

Microbial adhesion and nanocomposite‐loaded antifouling applications of insulating polymers in transmission lines‐a review

AbstractIn regions characterised by high humidity and abundant vegetation, the external insulation materials utilised in high‐voltage transmission and transformation are frequently fouled with a multitude of microorganisms, thereby jeopardising the reliable operation of the power grid. A comprehensive overview of the periodic growth regulation of parasitic algae is presented upon insulating composites across various regions of the world. Additionally, it highlights the methods for quantitative evaluation and accurate prediction of algae coverage degree. Also, the biological contaminates coating process and the artificial flashover test method are summarised, and the effects of algae on the reliability of inorganic and organic materials used for external insulation are compared. It emphasises the dynamic hygroscopic characteristics and cytoelectronegativity of cell secretions as the critical factors that negatively affect the hydrophobicity and flashover performance of silicone rubber insulators by algae. Furthermore, valuable insights into the long‐term inhibition of algae growth on polymeric insulators are provided using eco‐friendly antibiotic‐loaded silica aerogel nanocomposites.

Effects of clarithromycin exposure on the growth of Microcystis aeruginosa and the production of algal dissolved organic matter

Antibiotics are commonly found in the aquatic environment, which can affect microbial community compositions and activities, and even have potential adverse impacts on human and ecosystem health. The current understanding of the effects of antibiotics on microalgae growth and algal dissolved organic matter (DOM) remains indistinct. To understand the toxic effects of antibiotics on the microalgae, Microcystis aeruginosa was exposed to clarithromycin (CLA) in this study. Cell density determination, chlorophyll content determination, and organic spectrum analysis were conducted to show the effect of CLA exposure on the growth, photosynthetic activity, and organic metabolic processes of Microcystis aeruginosa. The findings revealed that the physiological status of algae could be significantly influenced by CLA exposure in aquatic environments. Specifically, exposure to 1 μg/L CLA stimulated the growth and photosynthetic activity of algal cells. Conversely, CLA above 10 μg/L led to the inhibition of algal cell growth and photosynthesis. Notably, the inhibitory effects intensified with the increasing concentration of CLA. The molecular weight of DOM produced by Microcystis aeruginosa increased when exposed to CLA. Under the exposure of 60 μg/L CLA, a large number of algal cells ruptured and died, and the intracellular organic matter was released into the algal liquid. This resulted in an increase in high molecular weight substances and soluble microbial-like products in the DOM. Exposure to 1 and 10 μg/L CLA stimulated Microcystis aeruginosa to produce more humic acid-like substances, which may be a defense mechanism against CLA. The results were useful for assessing the effects of antibiotic pollution on the stability of the microalgae population and endogenous DOM characteristics in aquatic ecosystems.

Algal growth inhibition test with TEMPO-oxidized cellulose nanofibers

Ecotoxicity data on cellulose nanofibers (CNFs) are limited despite their wide potential applications prospects, such as structural and packaging materials, filters, coatings, foods, and cosmetics. In this study, toxicity tests of 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized CNFs (TEMPO-CNFs), which are one of the major CNF products commercially available in Japan, on the green alga Raphidocelis subcapitata were conducted. As nanomaterials are considered difficult-to-test substances, the Organisation for Economic Co-operation and Development has released a guidance document that provides considerations regarding ecotoxicity tests of nanomaterials. In the algal growth inhibition tests of TEMPO-CNFs, there were specific issues to be examined, including the effects of medium components on the characteristics of TEMPO-CNFs, CNF interference with algal density measurements, algal interference with CNF measurements, and the effects of ion concentration changes in the test medium by the addition of CNFs on algal growth. To examine these issues, we conducted preliminary studies and established a suitable test method for algal growth inhibition tests of TEMPO-CNFs. We confirmed that the components in the medium for algal growth inhibition tests had negligible effects on the characteristics (zeta-potential, viscosity, and morphology) and concentration stability of TEMPO-CNFs and that in vitro and in vivo fluorescence measurements were applicable for estimating the algal densities, without interference by TEMPO-CNFs. In contrast, we observed that the grown algae interfered with the CNF concentration measurements. Therefore, we established a method to correct the measured CNF concentrations by estimating the algal contribution. Furthermore, we found that the nutrient salt concentrations in the medium changed due to interactions with CNFs; however, this change did not affect algal growth. Based on the results of the preliminary studies, algal growth inhibition tests of TEMPO-CNFs were conducted using in vitro and in vivo fluorescence measurements, along with measurements of CNFs and ion concentrations in the test dispersions. The test results showed that no growth inhibition was observed on growth rate or yield even at the maximum CNF concentration of 100 mg/L, suggesting that the ecological effect of TEMPO-CNFs on algae was relatively low. The results of this study will be valuable for conducting ecotoxicity assessments on additional CNFs and comparable nanomaterials in future studies.

Repeated Exposure Enhanced Toxicity of Clarithromycin on Microcystis aeruginosa Versus Single Exposure through Photosynthesis, Oxidative Stress, and Energy Metabolism Shift.

Antibiotics are being increasingly detected in aquatic environments, and their potential ecological risk is of great concern. However, most antibiotic toxicity studies involve single-exposure experiments. Herein, we studied the effects and mechanisms of repeated versus single clarithromycin (CLA) exposure on Microcystis aeruginosa. The 96 h effective concentration of CLA was 13.37 μg/L upon single exposure but it reduced to 6.90 μg/L upon repeated exposure. Single-exposure CLA inhibited algal photosynthesis by disrupting energy absorption, dissipation and trapping, reaction center activation, and electron transport, thereby inducing oxidative stress and ultrastructural damage. In addition, CLA upregulated glycolysis, pyruvate metabolism, and the tricarboxylic acid cycle. Repeated exposure caused stronger inhibition of algal growth via altering photosynthetic pigments, reaction center subunits biosynthesis, and electron transport, thereby inducing more substantial oxidative damage. Furthermore, repeated exposure reduced carbohydrate utilization by blocking the pentose phosphate pathway, consequently altering the characteristics of extracellular polymeric substances and eventually impairing the defense mechanisms of M. aeruginosa. Risk quotients calculated from repeated exposure were higher than 1, indicating significant ecological risks. This study elucidated the strong influence of repeated antibiotic exposure on algae, providing new insight into antibiotic risk assessment.

Toxic effects and action mechanism of metal-organic framework UiO-66-NH2 in Microcystisaeruginosa

The zirconium metal-organic framework UiO-66-NH2 has garnered considerable attention for their potentials of removing environmental contaminants from water. The production and application of UiO-66-NH2 make their releases into the aquatic environment inevitable. Nevertheless, little information is available regarding its potential risk to the environment and aquatic organisms, thus limiting the evaluation of its safe and sustainable use. In this study, the ecotoxicity of UiO-66-NH2 was evaluated, specifically its impacts on growth, extracellular organic matter release, and metabolomic changes of the model phytoplankton Microcystis aeruginosa (M. aeruginosa). UiO-66-NH2 exhibited moderate effects on algal physiology including growth, viability, and photosynthetic system. At concentrations below 20 mg/L, UiO-66-NH2 induced negligible inhibition of algal growth, algal viability, and photosynthesis. In contrast, UiO-66-NH2 boosted the release of extracellular organic matter even at concentration as low as 0.02 mg/L. These findings indicated that, while no evident damage to algal cells was observed, UiO-66-NH2 was hazardous to the aquatic environment as it stimulated the release of algal toxins. Moreover, UiO-66-NH2 entered algal cells rather than adhering to the surface of M. aeruginosa as observed by the fluorescence imaging. Based on metabolic analysis, UiO-66-NH2 influenced the cyanobacteria mainly through interference with purine metabolism and ABC transporter. This study sheds light on the potential threat UiO-66-NH2 posing to microalgae, and has potential implications for its safe utilization in the environmental field.

Toxic Effects of Copper Oxide Nanoparticles on Chlorella vulgaris

Abstract Aim: Exploitation of nano-based materials has increased the disposal of nanoparticles into the environment. Toxic nanomaterials pose their adverse effects and severely impact the human and environmental health. The aim of this study was to explore the toxic effects of chemically-synthesized copper oxide nanoparticles (CuO-NPs) on Chlorella vulgaris using an algal growth inhibition assay. Materials and Methods: Nanoparticles were synthesized using cupric sulfate and sodium hydroxide. Synthesized nanoparticles were characterized by Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible (UV-vis) spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy. C. vulgaris culture was exposed to various concentrations of CuO-NPs at intervals of 3, 6, 12, and 24 h. Growth inhibition assay of algal culture was estimated via the spectroscopic method and cell enumeration was done by Neubauer hemocytometry. Results: The average diameter of CuO-NPs was ~35.85 nm. UV-Vis spectroscopy was used to confirm the configuration of CuO-NPs. Therefore, FTIR results has indicated high purity of synthesized CuO-NPs. Size of the CuO-NPs was determined by XRD. Results showed that growth of C. vulgaris microalgae was notably affected by the exposure of 2 mg/L CuO-NPs concentration exposure for 6 h. Conclusion: The current work showed that CuO-NPs have significant toxic to Chlorella sp. Data analysis showed NPs have broad effects on growth of C. vulgaris and there is a correlation between nanoparticles concentration as well as their toxicity on the microalgae.

Assessing the genotoxic potential of wastewater effluents from three wastewater treatment plants in South Africa.

Wastewater treatment plants are mainly monitored for quality in terms of their biological oxygen demand and microbiological constituents as stipulated in the specific discharge permit. Wastewater influents and effluents were taken from three WWTPs in South Africa over the summer and winter seasons. Previous toxicity tests such as the Vibrio fischeri bioluminescence assay and the Selenastrum capricornutum algal growth inhibition test have shown that the effluents displayed acute toxicity. To further investigate the quality of the effluent, the genotoxic potential was determined using the SOS Chromosome and UMU Chromosome test. The SOS Chromotest demonstrated induction factor values of above 1.5 for influents during both seasons indicating that the influents were genotoxic (p < 0.05). Effluents discharged during winter and summer also had induction factors greater than 1.5 (p < 0.05). A range of induction factors was detected with the UMU-Chromotest for influents and effluents (1.98 ± 0.38 and 2.40 ± 0.51, respectively). Findings show point sources in the area can lead to influents and effluents that are potentially genotoxic. Designing a monitoring programme that encompasses testing of both the regulatory determinants with additional specialized tests can provide a more holistic view of wastewater quality and the efficiency of WWTP to reduce the discharge of hazards.

Investigation of toxic effects of BPA and BPA analogues (BPS and BPAF) on Spirulina sp., Desmodesmus subspicatus and Chlorella vulgaris

Bisphenols (BPs) are produced for many applications for used in industry. BPs have been found all part of aquatic environments such as sediment and surface water that is poses a risk to the aquatic ecosystem. Restricting the use of BPA, environmental concentrations of bisphenol S, and bisphenol AF begin to increase. The present study aims to indicate that toxicity BPA and BPA analogues (BPS and BPAF) by algal growth inhibition test for the green algae Chlorella vulgaris, Spirulina sp., Desmodesmus subspicatus. In this way, result of this study present the nominal effective concentrations of BPA analogues and the suitability of the species for use as a biomarker in ecotoxicology tests. IC50 values (growth rate inhibition by 50%, respectively) for three toxicants were determined separately. Results of this study showed the effects of these chemicals on photosynthesis (primer production). The result of algal growth inhibition test showed that BPAF (72h EC50 3.80 mg/L) was found to be more toxic than BPS (3d EC50 6.31 m L-1) for Spirulina sp. BPS (3d EC50 2.43 mg/L) showed the most toxic effect on the growth of C. vulgaris, followed by BPAF with 3d EC50 3.32 mg/L. BPS (3d EC50 0.88 mg/L) and BPAF (3d EC50 6.48 mg/L) were found to be toxic for D. subspicatus, respectively, from highest to lowest toxicity. These results indicate that bisphenol analogues are hazardous to primer production. Therefore, it is necessary to study their combined effects as well as to study how they act individually.

Effect-based monitoring of two rivers under urban and agricultural influence reveals a range of biological activities in sediment and water extracts

Chemical contaminants, such as pesticides, pharmaceuticals and industrial compounds are ubiquitous in surface water and sediment in areas subject to human activity. While targeted chemical analysis is typically used for water and sediment quality monitoring, there is growing interest in applying effect-based methods with in vitro bioassays to capture the effects of all active contaminants in a sample. The current study evaluated the biological effects in surface water and sediment from two contrasting catchments in Aotearoa New Zealand, the highly urbanised Whau River catchment in Tāmaki Makaurau (Auckland) and the urban and mixed agricultural Koreti (New River) Estuary catchment. Two complementary passive sampling devices, Chemcatcher for polar chemicals and polyethylene (PED) for non-polar chemicals, were applied to capture a wide range of contaminants in water, while composite sediment samples were collected at each sampling site. Bioassays indicative of induction of xenobiotic metabolism, receptor-mediated effects, genotoxicity, cytotoxicity and apical effects were applied to the water and sediment extracts. Most sediment extracts induced moderate to strong estrogenic and aryl hydrocarbon (AhR) activity, along with moderate toxicity to bacteria. The water extracts showed similar patterns to the sediment extracts, but with lower activity. Generally, the polar Chemcatcher extracts showed greater estrogenic activity, photosynthesis inhibition and algal growth inhibition than the non-polar PED extracts, though the PED extracts showed greater AhR activity. The observed effects in the water extracts were compared to available ecological effect-based trigger values (EBT) to evaluate the potential risk. For the polar extracts, most sites in both catchments exceeded the EBT for estrogenicity, with many sites exceeding the EBTs for AhR activity and photosynthesis inhibition. Of the wide range of endpoints considered, estrogenic activity, AhR activity and herbicidal activity appear to be the primary risk drivers in both the Whau and Koreti Estuary catchments.

Comparison on the formation and toxicity for chlorinated products during the oxidation of acetic acid (CH3COOH) by three widely used advanced oxidation processes (AOPs) at the presence of [formula omitted]

As a technology for industrial wastewater advanced treatment, there is a lack of relevant information the impacts of the treated effluents by advanced oxidation processes (AOPs) on ecological environment. Therefore, this study mainly compared the differences of the formation types and concentrations of chlorinated organic products（COPs）and active inorganic chlorine species (AICS) and toxicity changes in the oxidation of CH3COOH by three commonly used AOPs technologies as Fenton, ozone and electrochemical advanced oxidation process (EAOP) with the addition of Cl−. The results illustrate that in the EAOP process, trichloromethane (TCM) and Chloroacetic acids (CAAs) were the main COPs in the oxidation of CH3COOH by EAOP at 120 min. CCl4 was major COPs for the Fenton and ozone oxidation of CH3COOH, respectively. Through the algae growth inhibition experiment and the toxicity evaluation by using ECOTOX toxicity database, the toxicity of EAOP oxidation of CH3COOH to algae and fish were much higher than those from Fenton and ozone oxidation as the highest formation concentrations of inorganic by-products. Considering the toxic effects on the environment, when choosing the AOPs for the further treatment of wastewater containing Cl−, try to avoid the use of EAOP technology, and it is better to choose Fenton and ozone oxidation.

The comparative effects of visible light and UV-A radiation on the combined toxicity of P25 TiO2 nanoparticles and polystyrene microplastics on Chlorella sp.

The ubiquitous presence of TiO2 nanoparticles (nTiO2) and microplastics (MPs) in marine ecosystems has raised serious concerns about their combined impact on marine biota. This study investigated the combined toxic effect of nTiO2 (1 mg/L) and NH2 and COOH surface functionalized polystyrene MPs (PSMPs) (2.5 and 10 mg/L) on Chlorella sp. All the experiments were carried out under both visible light and UV-A radiation conditions to elucidate the impact of light on the combined toxicity of these pollutants. Growth inhibition results indicated that pristine nTiO2 exhibited a more toxic effect (38%) under UV-A radiation when compared to visible light conditions (27%). However, no significant change in the growth inhibitory effects of pristine PSMPs was observed between visible light and UVA radiation conditions. The combined pollutants (nTiO2 + 10 mg/L PSMPs) under UV-A radiation exhibited more growth inhibition (nTiO2 + NH2 PSMPs 66%; nTiO2 + COOH PSMPs 50%) than under visible light conditions (nTiO2 + NH2 PSMPs 55%; TiO2 + COOH PSMPs 44%). Independent action modeling indicated that the mixture of nTiO2 with PSMPs (10 mg/L) exhibited an additive effect on the algal growth inhibition under both the light conditions. The photoactive nTiO2 promoted increased production of reactive oxygen species under UV-A exposure, resulting in cellular damage, lipid peroxidation, and impaired photosynthesis. The effects were more pronounced in case of the mixtures where PSMPs added to the oxidative stress. The toxic effects of the binary mixtures of nTiO2 and PSMPs were further confirmed through the field emission electron microscopy, revealing specific morphological abnormalities. This study provides valuable insights into the potential risks associated with the combination of nTiO2 and MPs in marine environments, considering the influence of environmentally relevant light conditions and the test medium.

Improved eutrophication model with flow velocity-influence function and application for algal bloom control in a reservoir in East China

Improving hydrodynamic conditions is considered an effective method for facilitating the eutrophication management. However, the effect of hydrodynamic conditions on algal growth has rarely been quantified. In this work, a eutrophication model was developed and flow velocity was introduced into the algae growth kinetic formula to simulate the dynamics of algae growth in a drinking water source reservoir in East China. Based on the previous research and model calibration, the flow velocity-influence function f(v) and its parameters were determined. Accordingly, the optimal flow velocity for the dominant algae growth and critical flow velocity for algal growth inhibition were presented to be 0.055 m/s and 0.200 m/s for the study reservoir. Modeled results considering f(v) agreed with better with observations and reproduced the algal overgrowth process more accurately. The spatial-temporal differences in chlorophyll a (Chl a) concentration distribution during the algal proliferation period were analyzed on the basis of simulation results, which corroborated the significant influence of flow velocity on algal growth. The established model was applied to investigate the effect of improvement in hydrodynamic conditions on algal bloom control in the reservoir, and the scenario simulation of the additional sluice was conducted. Results showed that the additional sluice operation inhibited algal overgrowth effectively, resulting in an average decrease of 24.8%, 3.3%, 43.0%, and 37.5% in modeled Chl a concentration upstream north, upstream south, midstream and downstream, respectively. The established model might serve as a practical tool for eutrophication management in the study reservoir and other water bodies with similar hydrological characteristics and geographical features.