The most susceptible area of a structural member, where the most inelastic rotation would take place, is the plastic hinge. At this stage, flexural elements in particular achieve their maximal bending flexibility. This study uses finite element analysis (FEA) and experimental inquiry to analyze and test the effects of carbon fiber mesh jacketing and steel fiber reinforcement at the concrete beam’s plastic hinge length subjected to a vertical monotonic load. The compressive strength, split tensile strength, and flexural strength tests are used to evaluate the mechanical qualities, such as compressive strength and tensile strength, of M25 grade concrete that is used to cast specimens. While conducting this analysis, seven different parameters are taken into account. After the conventional concrete beam has been cast, the steel-fiber reinforced beam is cast. Several empirical formulas drawn from Baker, Sawyer, Corley, Mattock, Paulay, Priestley, and Park’s methods were used to calculate the length of the beam’s plastic hinge. Finally, the steel fiber was inserted independently at 150 mm into the concrete beam’s plastic hinge length mechanism using the techniques described by Paulay and Priestley. The analytical and experimental results are compared. The results obtained from the investigations by applying monotonic loads to the beam show that fibers used at specific plastic hinge lengths show a 41 kN ultimate load with 11.63 mm displacement, which is similar to that of conventional beam displacement, and performance. Meanwhile, the carbon fiber mesh wrapped throughout the beam behaves better than other members, showing an ultimate load of 64 kN with a 15.95 mm deflection. The fibers provided at the plastic hinge length of the beam perform similarly to those of a conventional beam; eventually, they become economical without sacrificing strength.
Read full abstract
Jun 21, 2024
Moritz Hupfauf + 1
Open Access
