Indoor Sources Research Articles

Determining the Exposure Routes and Risk Assessment of Isocyanates in Indoor Environments.

Isocyanates are used as raw materials for polyurethane foams, paints, and building materials. The isocyanates can cause acute adverse health effects such as irritation of the respiratory tract, skin, and eyes, and induce asthma and sick house syndrome. However, investigations into the potential sources and risk assessments of indoor isocyanates are limited. Thus, this study aimed to determine the sources and exposure routes of isocyanates and to assess their risk in indoor environments. The results showed that household products, such as infant chairs, mattresses, and polyurethane foam spray, used in indoor environments are potential sources of atmospheric isocyanic acids (ICA). Toluene diisocyanate and methyl isocyanate pose relatively high risks to indoor environments. Total concentrations of isocyanates ranged from 38.2 to 1570ngg-1 in infant chairs, mattresses, and spray polyurethane foams. The indoor products can be indoor sources of ICA because emission rates of ICA from household products were observed in all products (0.0536-1.37ngg-1 d-1). Field observations showed that isocyanate concentrations in house-dust samples ranged from 0.194±0.126 (ethyl isocyanate) to 70.1±67.8 (ICA)ngg-1. Atmospheric isocyanate concentrations ranged from 0.0030±0.020 (propyl isocyanate) to 26.0±14.3 (ICA)ng m-3. An estimation of human exposure demonstrated that air inhalation was the major route of isocyanate exposure. The minimum margin of exposure values of methyl isocyanate and toluene diisocyanate were 523 and 655, respectively, for children, indicating that they may pose a relatively high risk.

Continuous measurement of the dynamics of residential indoor and outdoor NO2 and the contributions to human exposure

In residential environment, NO2 is an important air pollutant. Yet, the dynamics of indoor NO2 and source contributions to human exposure are not well understood. Here, we conducted a continuous NO2 measurement in and out of eight households in Guangzhou, China. Paired high time-resolution NO2 data sets indoors (kitchen, living room) and outdoors (balcony) were obtained with NO2 monitors. We summarized the indoor and outdoor NO2 levels, identified temporal variation patterns, analyzed indoor-outdoor relationships, and quantified source contributions to indoor NO2 exposure. Indoor NO2 were overall higher than outdoor NO2, and in most cases, the highest NO2 levels were observed in the kitchen. NO2 in the kitchen was characterized by multiple spikes associated with use of gas stoves, while NO2 in the living room was also elevated but the peaks were generally smaller. The indoor-outdoor correlations were stronger in winter than in summer, and were stronger in nighttime than daytime. The sources contributing to indoor NO2 were separated with a conceptual model. Overall, the outdoor NO2 source contributed 73% – 76% of the NO2 in the kitchen, and 76% – 85% in the living room. The source pattern was quite different: outdoor NO2 sources were present indoors all the time; by contrast, indoor NO2 sources were present sporadically but with a very high contribution. This has important implication to the exposure assessment that indoor NO2 sources lead to short-term high exposure, and deserves attention regarding acute health effects.

Sources and determinants of exposure to indoor air pollutants in schools and hospitals: a review

Abstract Background Indoor Air Quality (IAQ) is an important determinant of health. This study aimed to review the available scientific evidence about indoor pollutants and determinants of exposure in several settings, in the scope of the K-HEALTHinAIR project. Methods The systematic review was performed for the sources, concentrations, and determinants of pollutants in schools in the European region for 2013-2023. Articles were selected for data extraction if they were epidemiological studies, reported primary data for indoor air and pollutant levels, and, identified sources and determinants of exposure. Results The main pollutants affecting IAQ in schools and hospitals were carbon dioxide, volatile organic compounds (e.g., formaldehyde, terpenes), particulate matter, nitrogen dioxide, radon, ozone, and carbon monoxide. Besides the outdoor environment, several important indoor sources of emissions were identified such as occupancy, resuspension, cleaning products. Ventilation was the main determinant influencing the indoor levels of pollutants, stressing the importance of good planning, installation, and maintenance of mechanical ventilation systems in buildings. Other determinants were the number of occupants and their activities, and the building characteristics (e.g., type of floor, location, etc). Conclusions Results revealed indoor air quality as a public health concern since several pollutants are present in indoor settings. The identification of sources and determinants of exposure is fundamental for determining preventive measures in a public health perspective. Acknowledgments: K-HEALTHinAIR team for screening and data extraction: Mariana Corda, Jose Fermoso, Alicia Aguado, Sandra Rodriguez, Hanns Moshammer, Mireia Ferri, Belén Costa, Leticia Pérez, Wojciech Hanke, Artur Badyda, Piotr Kepa, Katarzyna Affek, Nina Doskocz, Laura Martín, Oguz Mulayim, Cesar Mediavilla Martinez, Alba Gómez, Ruben González, Isaac Cano, Josep Roca, Simon de Leede.

An Enhanced Seamless Localization Framework Using Spatial-temporal Uncertainty Predictor Under Obscured Indoor and Outdoor Scenes

Abstract. Uncertainty modelling is regarded as one of the core components in the field of urban navigation, that can affect the performance of indoor and outdoor location information acquisition, especially under obscured scenarios. Existing multi-source fusion-based seamless positioning algorithms are subjected to random and highly dynamic human motion characteristics and changeable observation errors caused by the dynamic occlusions of human and buildings under urban scenes, which lead to the insufficient spatiotemporal correlation and poor accuracy of final multi-source fusion structure. To fill in this gap, this paper proposes an enhanced seamless localization framework using spatial-temporal uncertainty predictor under obscured indoor and outdoor scenes (ESL-STUP), that takes into account both temporal correlation and spatial correlation of trajectories provided by Wi-Fi, GNSS, and sensor-originated motion information. An iPDR-based trajectory estimation structure is proposed, using the integration of INS/PDR mechanizations, magnetic observations, and deep-learning based speed estimation to enhance the performance of traditional PDR algorithm. A period of human motion features extracted from hybrid location sources are modelled instead of only one or adjacent location points to realize time-varying measured uncertainty errors prediction, and the predicted uncertainty errors of different indoor and outdoor location sources are integrated with iPDR to realize robust seamless positioning performance. Comprehensive experiments indicate that compared with existing multi-source fusion-based seamless positioning structure, the proposed ESL-STUP realizes much better performance under different scenes.

Air pollution and respiratory health in patients with COPD: should we focus on indoor or outdoor sources?

IntroductionWhile associations between ambient air pollution and respiratory health in chronic obstructive pulmonary disease (COPD) patients are well studied, little is known about individuals’ personal exposure to pollution and associated...

Concurrent measurements of atmospheric Hg in outdoor and indoor at a megacity in Southeast Asia: First insights from the region

Atmospheric mercury (Hg) is a critical indoor (ID) air pollutant and necessitates stringent monitoring. However, studies have primarily focused on Hg outdoors (OD) compared to ID, with no investigations conducted within the Southeast Asia (SEA) region. In this study, total gaseous Hg (TGM) concentrations and human exposure levels were investigated across various site characteristics in Ho Chi Minh City (HCMC), a megacity in SEA. The measured TGM concentrations for OD and ID were 5.12 ± 6.87 ng m−3 (1.20–48.7 ng m−3) and 34.5 ± 60.3 ng m−3 (1.26–271.9 ng m−3). The overall ID/OD ratio was 5.01 (0.77–9.3), signifying markedly elevated ID TGM concentrations. This ratio increases in the following order: shopping malls (1.50) < hospitals (3.21) < chemical laboratories (5.76) < households (11.7). Notably, sites associated with Hg incidents and the utilization of Hg-contained chemicals demonstrate notably high ID/OD levels, ranging from 8.0 to 40.1. The use of Hg-containing chemicals within the chemical laboratory serves as a significant contributor to heightened ID TGM levels. Non-combustion Hg sources, therefore, play an important role in inducing the ID TGM level. The hazard index (HQ) values observed for ID and OD were 0.1 and 0.01, respectively, indicating a negligible risk of exposure to TGM within the study area. However, HQ values recorded within laboratory environments employing Hg-associated chemicals and dental hospitals were 1–17 times greater compared to other sites. The present work provides new insight into the non-combustion ID source of TGM and was helpful for upcoming studies in exploring potential sources of TGM in megacities.

Evidence-driven indoor air quality improvement: An innovative and interdisciplinary approach to improving indoor air quality.

Indoor air pollution is a recognized emerging threat, claiming millions of lives annually. People are constantly exposed to ambient and indoor air pollution. The latest research shows that people in developed countries spend up to 90% of their time indoors and almost 70% at home. Although impaired IAQ represents a significant health risk, it affects people differently, and specific populations are more vulnerable: children, the elderly, and people with respiratory illnesses are more sensitive to these environmental risks. Despite rather extensive research on IAQ, most of the current understanding about the subject, which includes pollution sources, indoor-outdoor relationships, and ventilation/filtration, is still quite limited, mainly because air quality monitoring in the EU is primarily focused on ambient air quality and regulatory requirements are lacking for indoor environments. Therefore, the EDIAQI project aims to improve guidelines and awareness for advancing the IAQ in Europe and beyond by allowing user-friendly access to information about indoor air pollution exposures, sources, and related risk factors. The solution proposed with EDIAQI consists of conducting a characterization of sources and routes of exposure and dispersion of chemical, biological, and emerging indoor air pollution in multiple cities in the EU. The project will deploy cost-effective/user-friendly monitoring solutions to create new knowledge on sources, exposure routes, and indoor multipollutant body burdens. The EDIAQI project brings together 18 organizations from 11 different European countries that provide interdisciplinary skills and expertise in various fields, including environmental science and technology, medicine, and toxicology, as well as policy design and public engagement.

An analytical model to predict the mass loading of air cleaners in typical indoor environments and to estimate the service interval from standardized filter loading tests

For indoor air cleaners, especially those using electret filters, it is known that the clean air delivery rate (CADR) can strongly decrease over time due to loading of the filters with particles. Standardized tests like in GB/T 18801 are used to determine the mass of test aerosol particles leading to a reduction of the initial CADR by 50 % (cumulative clean mass), but this method does not allow to draw conclusions on when this reduction is reached in a typical indoor environment. However, a good estimate would help manufactures to give reasonable recommendations in which intervals a service of the air cleaner becomes necessary. Therefore, we developed an analytical model including the most relevant parameters of a typical indoor environment and assumed different courses for the time-dependent decay of the CADR. We show that consistent estimates for the service interval can be derived, which do only slightly depend on the exact choice of the model. However, we partially find pronounced differences between scenarios dominated by either indoor or outdoor sources. We compare the new model to the model of GB/T 18801 and show that the standard overestimates the service interval for a given set of parameters by about 30 %. We finally propose a method for estimating the service interval from only one loading and one discharging step and give perspectives for further applications of the model.

Simulation of indoor space thermal energy circulation in architectural environment design detail features based on visual object tracking algorithm

The heat circulation of interior space plays a crucial role in the design of the built environment, affecting energy efficiency and residential comfort. With the development of science and technology, visual target tracking algorithm provides a new possibility for optimizing thermal energy cycle. The purpose of this paper is to study the simulation method of indoor space thermal energy cycle based on visual target tracking algorithm to improve the efficiency of thermal energy management in building environment design and ensure indoor comfort. The research uses laboratory Settings, combined with high-performance cameras and advanced visual target tracking algorithms, to monitor indoor heat source distribution and personnel movement in real time. Through data acquisition and analysis, the indoor heat cycle model was constructed and simulated by computational fluid dynamics (CFD) software to evaluate the influence of different design parameters on the heat cycle. Through the optimization of the design scheme, the efficiency of indoor heat use is significantly improved, and the comfort score of residents is significantly improved. Therefore, the simulation of indoor space thermal energy cycle based on visual target tracking algorithm provides an effective tool for building environment design, which can realize efficient energy management and improve living comfort.

Polychlorinated alkanes in indoor environment: A review of levels, sources, exposure, and health implications for chlorinated paraffin mixtures

Polychlorinated n-alkanes (PCAs) are the main components of chlorinated paraffins (CPs) mixtures, that have been commonly grouped into short-chain (SCCPs, C10–13), medium-chain (MCCPs, C14–17), and long-chain (LCCPs, C18-30) CPs. PCAs pose a significant risk to human health as they are broadly present in indoor environments and are potentially persistent, bioaccumulative, and toxic. The lack of specific terminology and harmonization in analytical methodologies for PCA analysis complicates direct comparisons between studies. The present work summarizes the different methodologies applied for the analysis of PCAs in indoor dust, air, and organic films. The large variability between the reviewed studies points to the difficulties to assess PCA contamination in these matrices and to mitigate risks associated with indoor exposure. Based on our review of physicochemical properties of PCAs and previously reported sum of measurable S/M/LCCPs levels, the homologue groups PCAs–C10–13 are found to be mostly present in the gas phase, PCAs–C14–17 in particulate matter and organic films, and PCAs–C≥18 in settled dust. However, we emphasized that mapping PCA sources and distribution in the indoors is highly dependent on the individual homologues. To further comprehend indoor PCA distribution, we described the uses of PCA in building materials and household products to apportion important indoor sources of emissions and pathways for human exposure. The greatest risk for indoor PCAs were estimated to arise from dermal absorption and ingestion through contact with dust and CP containing products. In addition, there are several factors affecting indoor PCA levels and exposure in different regions, including legislation, presence of specific products, cleaning routines, and ventilation frequency. This review provides comprehensive analysis of available indoor PCA data, the physicochemical properties, applied analytical methods, possible interior sources, variables affecting the levels, human exposure to PCAs, as well as need for more information, thereby providing perspectives for future research studies.

Parental stress interaction with environmental factors in childhood allergic asthma: Early life significance

Although stress and indoor/outdoor environments have been independently linked with asthma, their interactions on childhood physician-diagnosed allergic asthma (PDAA) remain undisclosed. We aimed to research the effect of parental stress and their interactions with indoor/outdoor environmental factors on childhood PDAA. A retrospective cohort study was undertaken of preschoolers at Changsha, a city in central China. We collected information on parental stress levels and various indoor environmental exposures, through questionnaire surveys. Outdoor air pollution exposure was obtained from ten ambient pollution monitoring stations in Changsha, and individual pollution exposure were calculated. Using logistic regression models, we assessed the individual and synergistic impacts of parental stress and indoor/outdoor factors on childhood PDAA. We found that preschoolers' PDAA showed a significant association with high parental gross annual income and psychological stress indicators including fatigue, headache, and inattention, with ORs = 2.10 (1.31–3.35), 1.38 (1.04–1.82), 1.33 (1.07–1.65), and 1.42 (1.14–1.76), respectively. Furthermore, in preschoolers with high parental economic stress, the association between indoor mold/moisture spots and PDAA was notably more pronounced. Significantly stronger association between outdoor SO2 exposure in the past year in preschoolers with socially stressed parents. Parental headache and inattention exacerbated the effects of PM2.5-10 and PM10 exposure during the 7-9th months before pregnancy and throughout the pregnancy on PDAA. Preschoolers with high parental psychological stress and high exposure to outdoor atmospheric pollutants showed an increased likelihood of developing PDAA. Our research suggests that both parental stress and its interaction with hazardous environments from indoor sources and atmospheric pollutants contribute to PDAA.

Dynamics of indoor volatile organic compounds and seasonal ventilation strategies for residential buildings in Northeast China

This study utilized a questionnaire survey to collect data from 265 residents in Changchun, encompassing building characteristics, ventilation frequency and overall satisfaction with the indoor environment. Statistical analysis revealed significant disparities in ventilation frequency and satisfaction with indoor temperature. The survey results indicate that the primary mode of indoor air exchange amongst Changchun residents is window ventilation, accounting for 93%. Field tracking was conducted to measure indoor air concentrations of volatile organic compounds (VOCs) in residential buildings during winter and summer seasons. The study revealed a significant increase in the average indoor/outdoor (I/O) ratio of the targeted 25 VOC concentrations in winter, rising from 10.8 to 17.7. The findings underscore indoor sources as predominant contributors to the measured VOCs. Temperature, humidity and room functions are the main factors affecting VOC concentration. Higher temperatures and increased relative humidity both contributed to elevated indoor VOC levels. This study recommended the opening of more windows during high temperature and high humidity in summer, to maintain good indoor air quality and effectively age the emission of VOCs from furniture. This study contributes to the enhancement of the database on indoor air quality and effective ventilation strategies in cold regions for safeguarding public health.

Size-segregated content of heavy metals and polycyclic aromatic hydrocarbons in airborne particles emitted by indoor sources

Indoor air quality is negatively affected by the emission of different combustion sources releasing airborne particles and related particle-bound toxic compounds (e.g., heavy metals and polycyclic aromatic hydrocarbons). To date, very few studies focused on the chemical characterization of the airborne particles emitted by indoor sources were carried out; moreover, no data on their size-resolved chemical compositions are available. In the present study, an experimental analysis aimed at determining the size-segregated content of heavy metals and polycyclic aromatic hydrocarbons in airborne particles (including sub-micrometric ones) emitted by widely-used indoor combustion sources (i.e., incenses, candles, mosquito-coils, and cooking activities) was carried out. To this purpose, airborne particles were collected through an electric low-pressure impactor and were post-analyzed by means of chromatography–mass spectrometry and atomic emission spectrometry techniques. Results of the analyses showed that the chemical composition of the emitted particles is not invariant to the particle size, indeed, an important contribution of sub-micrometric particle range to the total mass of chemical compounds emitted by the sources was noticed. These findings also demonstrated that significant underestimations of particle-bound compounds depositing in the lungs could occur if size-dependent compositions are not adopted.

Feasibility Study on the Use of NO2 and PM2.5 Sensors for Exposure Assessment and Indoor Source Apportionment at Fixed Locations.

Recent advances in sensor technology for air pollution monitoring open new possibilities in the field of environmental epidemiology. The low spatial resolution of fixed outdoor measurement stations and modelling uncertainties currently limit the understanding of personal exposure. In this context, air quality sensor systems (AQSSs) offer significant potential to enhance personal exposure assessment. A pilot study was conducted to investigate the feasibility of the NO2 sensor model B43F and the particulate matter (PM) sensor model OPC-R1, both from Alphasense (UK), for use in epidemiological studies. Seven patients with chronic obstructive pulmonary disease (COPD) or asthma had built-for-purpose sensor systems placed inside and outside of their homes at fixed locations for one month. Participants documented their indoor activities, presence in the house, window status, and symptom severity and performed a peak expiratory flow test. The potential inhaled doses of PM2.5 and NO2 were calculated using different data sources such as outdoor data from air quality monitoring stations, indoor data from AQSSs, and generic inhalation rates (IR) or activity-specific IR. Moreover, the relation between indoor and outdoor air quality obtained with AQSSs, an indoor source apportionment study, and an evaluation of the suitability of the AQSS data for studying the relationship between air quality and health were investigated. The results highlight the value of the sensor data and the importance of monitoring indoor air quality and activity patterns to avoid exposure misclassification. The use of AQSSs at fixed locations shows promise for larger-scale and/or long-term epidemiological studies.

Microplastics comparison of indoor and outdoor air and ventilation rate effect in outskirts of the Seoul metropolitan city

Microplastics in the air are becoming a concern, especially in indoor environments. Outdoor microplastics can travel from far spaces while indoor ones remain suspended and recirculate in the indoor environment. In this study, we collected air samples from the same buildings indoors and outdoors and observed the indoor microplastic concentration was 1.8 times higher than the outdoor. 24-hour sampling was performed with a mini-volume air sampler at the rate of 5 L/min. In this study, along with a comparison of indoor and outdoor concentrations, we also studied the microplastics' type size, and shape. We found that fiber-type microplastics account for nearly 90 % of the total and synthetic fibers. We also reported the 10 highest present microplastics are Polyethylene, Polyethersulfone, Polyamide, Polystyrene, Acrylic, Polyvinyl Chloride, Polytetrafluoroethylene, Alkyd, and Polyurethane. It is also observed the indoor ventilation rate plays a major role in the microplastic concentrations, long and periodic ventilation resulted in the lower concentration of the indoor microplastics. This study resulted in higher indoor air concentrations than outdoor and even in the outskirts of the metropolitan city which shows that indoor air concentrations are dependent on indoor sources and human activity.

Phase distribution and probabilistic risk assessment of polycyclic aromatic hydrocarbons in indoor air of coffee shops at Zahedan, Iran

Polycyclic aromatic hydrocarbons (PAHs) are a class of hydrocarbons, some of which are established human carcinogens. Human exposure to these chemicals is complex and originates from both indoor and outdoor sources. This study measured the concentration of PAHs in the gaseous and particulate phases during the cold months of 2022 using XAD-2 sorbent tubes and Polytetrafluoroethylene (PTFE) filters in the indoor air of coffee shops in Zahedan, Iran (n = 23). The average concentrations of particulate-bound PAHs and gaseous PAHs were 13,411.86 ± 6517.24 ng/m³ and 6432.76 ± 4311.72 ng/m³, respectively. Source apportionment analyses indicated that the primary sources of PAHs in coffee shops were fossil fuel combustion and environmental tobacco smoke (ETS), commonly referred to as second and third-hand smoke. The lifetime cancer risk (LTCR) of inhaled PAHs was calculated using the Monte Carlo simulation method. The mean LTCR for adults and children from inhaling these substances were 9.43 × 10-6 ± 5.06 × 10-6 and 5.34 × 10-6 ± 2.87 × 10-6, respectively. The hazard quotient (HQ) of PAHs exceeded 1. These findings highlight the need to reduce PAHs exposure in public spaces through proper health warning labels and regulated indoor smoking policies.

Link between Wi-Fi, cordless devices, mobile phone usage patterns, and behavioral problems among Japanese children: A prospective cohort study

BackgroundWith the recent advent of technology, it is important to confirm the health and safety of the youth. This study aimed to prospectively evaluate the relationship between Wi-Fi, cordless phones, and mobile phone usage patterns and behavioral problems. MethodsThis study involved 2465 children aged 8–17 years from the Hokkaido Study on Environment and Children’s Health from October 2020 to January 2021, with a follow-up from September 2021 to March 2022. The mother–child dyad provided information on the presence of residential Wi-Fi and cordless phones, cordless phone call duration, and mobile phone usage pattern (duration of calls using mobile network and internet, online audio streaming, online video streaming, and playing online games) via a baseline questionnaire. Based on the scores on Strength and Difficulties Questionnaire at baseline and follow-up, the children were categorized into four groups: normal, persistent, improved, and concurrent. ResultsNo significant association was found between Wi-Fi, mobile phone calls via mobile networks, and behavioral problems. Cordless phone at home had higher odds for improvement in total difficulty scores, and cordless phone for calling more than 4 min per week had lower odds of persistent problematic prosocial behavior. Longer duration of mobile phone calling via the internet (>40 min/week) had higher odds of concurrent total difficulties. Mobile phone calling via mobile network for <5 min per week had higher odds for improved total difficulty scores. Audio streaming via mobile phones for 60–120 min had lower odds of persistent total difficulties. ConclusionOur results showed sporadic findings between residential RF-EMF indoor sources and mobile phone usage pattern. These observed findings could be affected by residual confounding and chance findings. Ongoing follow-up studies are necessary to further explore this association through detailed exposure assessment and addressing the potential limitations of our study.

Distribution assessment and source apportionment of particulate bound-PAHs in indoor air of south Asian precinct using IDW and PMF receptor model: A comprehensivestudy

PAHs have been recognised as a major menace to living-beings as well as environment. Several researchers have extensively claimed regarding death-defying nature of PAHs and its derivatives. However, these studies have only considered the ambient air which is a composition of automobile exhausts, industrial emissions etc. as major source of harmful air pollutants. Indoor air quality (IAQ) is an overlooked area since, although many researchers in recent times have been working on the chemistry and composition of IAQ, yet, source determination and nature of pollutants is still a comprehensive area to be explored. With the above stated objective, the present study emphases on 16 USEPA specified PAHs which are allied with particulate matter. Both PM as well as PAHs are some very common and treacherous chemical contaminant accountable for more than a million death globally. PAHs are organic compound which are either attached to PM of various sizes or can exist in gaseous form. Current work precises the concentration of PAHs associated with fine PM i.e., PM2.5 in indoor environment of south Asian precinct, further, using receptor modelling technique for determination indoor sources responsible for the emanation of specific PAHs. The toxicity equivalent quotient i.e., TEQ evaluated in the study demonstrations that the highest toxicity among all PAHs is exhibited by BaP followed by InP, BKF, BbF. Seasonal variations in the concentration of PAHs and their respective sources were also established using PMF models, which depicted the domination of 3-ring PAHs in winter with 42% contribution in outdoors, whereas, four-ring PAHs dominion in indoors. Similarly, in summer two-ring accounted for 35% in outdoors, and three-ring PAHs contributed highest with 26.8% in indoors. In monsoon PAHs with two-ring contributed highest with 45.2% in outdoors, whereas, 2-ring PAHs contributed 38.3% in indoors. Also, IDW mapping and molecular diagnostic ratio were assessed for an intense study on distribution of PAHs in the locality and the source apportionment purpose respectively. To the best of our knowledge, the study is first of its kind in this part of the world where, majority of the countries are either developing or under-developed and hence at greater risk to the noxious effects which are often overlooked. The study will provide a clear picture regarding the indoor sources of the PAHs and further help the further professionals to build a credible and pragmatic mitigation technique accordingly.

Indoor Environmental Quality and Effectiveness of Portable Air Cleaners in Reducing Levels of Airborne Particles during Schools’ Reopening in the COVID-19 Pandemic

Educational buildings tend to fail in the contagion containment of airborne infectious diseases because of the high number of children, for several hours a day, inside enclosed environments that often have inadequate indoor air quality (IAQ) conditions. This study aimed to assess indoor environmental quality and test the effectiveness of portable air cleaners (PACs) in alleviating airborne particle levels in schools of Central–Southern Spain during the period of reopening after the lockdown due to the COVID-19 outbreak. To accomplish this, three sampling campaigns were organized from September to December 2020 to consistently monitor temperature and relative humidity, carbon dioxide, and particulate matter in nineteen classrooms (seven school buildings). Results showed that although the recommendation of maintaining the windows open throughout the day seemed to be effective in promoting, in general, proper ventilation conditions (based on CO2 levels). For the colder campaigns, this practice caused notorious thermal comfort impairment. In addition, a great number of the surveyed classrooms presented levels of PM2.5 and PM10, attributable to outdoor and indoor sources, which exceeded the current WHO guideline values. Moreover, considering the practice of having the windows opened, the installation of 1 unit of PACs per classroom was insufficient to ensure a reduction in particle concentration to safe levels. Importantly, it was also found that children of different ages at different education levels can be exposed to significantly different environmental conditions in their classrooms; thus, the corrective measures to employ in each individual educational setting should reflect the features and needs of the target space/building.

Chemical composition of indoor and outdoor PM2.5 in the eastern Arabian Peninsula

Water-soluble and trace metal species in fine particulate matter (PM2.5) were determined for indoor and outdoor environments in Doha, Qatar. During the study period, PM2.5 concentrations showed significant variability across several indoor locations ranging from 7.1 to 75.8 μg m−3, while the outdoor mass concentration range was 34.7–154.4 µg m−3. The indoor and outdoor PM2.5 levels did not exhibit statistically significant correlation, suggesting efficient building envelope protection against outdoor PM2.5 pollution. Rather than outdoor sources, human activities such as cooking, cleaning, and smoking were the most significant influence on chemical composition of indoor PM2.5. NH4+ concentration was insufficient to neutralize SO42− indoors and outdoors, indicating the predominant presence of NH4HSO4. The enrichment factors indicated that outdoor Fe, Mn, Co, Cr, and Ni in PM2.5 mostly originated from crustal sources. In contrast, the remaining outdoor trace metals (Cu, Zn, As, Cd, Pb, and V) were mainly derived from anthropogenic sources. The indoor/outdoor concentration ratios revealed significant indoor sources for NH4+ and Cu. The crustal matter, water-soluble ions, and sea salt explained 42%, 21%, and 1% of the indoor PM2.5 mass, respectively. The same groups sequentially constituted 41%, 16%, and 1% of the outdoor PM2.5 mass.