Indoor Environmental Quality Research Articles

Operational performance of PCM embedded radiant chilled ceiling using a rule-based control strategy

The increasing energy demand for space cooling, projected to triple by mid-century and surpassing a quarter of today's global electricity usage, underscores the urgent need for innovative, more energy-efficient air-conditioning technologies. The research introduces phase change material (PCM) embedded radiant cooling (PCM-RCC) as a promising solution, offering enhanced energy efficiency and indoor environmental quality. Despite its potential, PCM-RCC remains in the developmental stage, requiring further research to fully unlock its benefits. This work aims to analyse the operational performance of PCM-RCC and develop an advanced rule-based control strategy to enhance its efficiency further. The analysis was conducted using a validated PCM-RCC transient system simulation model. To quantify the advantages of PCM-RCC over typical radiant cooling and evaluate the effectiveness of the proposed control strategy, two reference cases are defined: (1) basic-controlled PCM-RCC, and (2) radiant cooling without PCM. Results reveal that PCM-RCC with advanced control demonstrates higher load flexibility (∼93% off-peak time operation), 12% less electricity usage, a 5% coefficient of performance improvement, and a 30% decrease in operational costs compared to radiant cooling. Furthermore, the proposed system shows 9% lower energy usage with a 20% improvement in thermal comfort compared to basic-controlled PCM-RCC.

Environmental Quality bOX (EQ-OX): A Portable Device Embedding Low-Cost Sensors Tailored for Comprehensive Indoor Environmental Quality Monitoring.

The continuous monitoring of indoor environmental quality (IEQ) plays a crucial role in improving our understanding of the prominent parameters affecting building users' health and perception of their environment. In field studies, indoor environment monitoring often does not go beyond the assessment of air temperature, relative humidity, and CO2 concentration, lacking consideration of other important parameters due to budget constraints and the complexity of multi-dimensional signal analyses. In this paper, we introduce the Environmental Quality bOX (EQ-OX) system, which was designed for the simultaneous monitoring of quantities of some of the main IEQs with a low level of uncertainty and an affordable cost. Up to 15 parameters can be acquired at a time. The system embeds only low-cost sensors (LCSs) within a compact case, enabling vast-scale monitoring campaigns in residential and office buildings. The results of our laboratory and field tests show that most of the selected LCSs can match the accuracy required for indoor campaigns. A lightweight data processing algorithm has been used for the benchmark. Our intent is to estimate the correlation achievable between the detected quantities and reference measurements when a linear correction is applied. Such an approach allows for a preliminary assessment of which LCSs are the most suitable for a cost-effective IEQ monitoring system.

Labor camps in Dubai: implications of courtyard regulations on daylight performance

PurposeThe fundamental aim of the study is to investigate the implications of labor housing designs in Dubai, with a focus on courtyards and the governing building regulations, on daylight performance as an underlying factor impacting laborers’ indoor environmental quality. Several studies shed light on the subject of labor camps and labor migration in Dubai, but few have focused on the subject from the perspective of the environmental performance of these camps. A model that represents one of the labor camps was built using Rhinoceros 7.0 and Grasshopper software packages. Annual daylighting and glare simulations were carried out using the lighting modeling engine RADIANCE 5.0 in conjunction with the “ClimateStudio”.Design/methodology/approachThe construction sector has emerged as a significant economic development driver, attracting a diverse labor force from a variety of countries to Dubai. As a result, Dubai authorities have implemented several measures to ensure the provision of suitable housing facilities for its labor force. These measures contribute to the reduction of energy costs in labor housing by encouraging the use of renewable energy. While several studies shed light on the subject of labor camps and labor migration in Dubai, few have focused on the subject from the perspective of the environmental performance of these camps.FindingsThe study provided statistical evidence that the current regulations governing courtyards in labor housing resulted in significant changes in daylight levels across different floor levels of the labor housing units. It is suggested that both 2:3 and 3:4 Court Width-to-Height ratios would further contribute to a more consistent daylight Illuminance with marginal statistical differences between floor levels (p > 0.05). The 3:4 ratio, on the other hand, offers a consistent distribution across all floor levels in the North and South with negligible variances, although weakly significant differences can be yet expected between the first and fourth floors in the East and West orientations (p < 0.05). The results of Annual Sunlight Exposure (ASE) suggest excessive solar incidence and a high probability of glare, which remains a problem that must be addressed under the governing building regulations.Originality/valueThis study could serve as a framework for analyzing and contrasting the findings of other studies on labor accommodation, notably in the Gulf Cooperation Council (GCC) countries. Such an approach has the potential to enhance living conditions in labor accommodations in Dubai and other areas. It is necessary to meet people' physical and psychological well-being while also addressing sustainability and regulatory compliance.

Model-based optimal control strategy for multizone VAV air-conditioning systems for neutralizing room pressure and minimizing fan energy consumption

Control strategies for variable air volume (VAV) air-conditioning systems play a pivotal role in ensuring indoor environmental quality and energy efficiency. However, conventional approaches, such as static pressure reset (SPR) control, focus on managing indoor air temperature without considering the room pressure, which can lead to unbalanced room pressure and undesirable air leakage. Moreover, with the application of prevalent building pressure control strategies, such as airflow tracking control, to multizone VAV systems, neutralization of the room pressure is difficult across multiple zones in VAV systems. Therefore, this study introduces a model-based optimal control strategy for multizone VAV air-conditioning systems. The proposed strategy uses a multiobjective optimization framework to regulate fan frequencies and damper openings on both the supply and return sides. This holistic approach facilitates the simultaneous control of the indoor air temperature and room pressure while minimizing fan energy consumption. To assess the effectiveness of the proposed strategy, four control strategies were tested using a Python-based simulation testbed. The results demonstrate that the proposed strategy effectively maintains the indoor air temperature, neutralizes room pressure, and reduces fan energy consumption, thereby contributing to the overall efficiency of the VAV system. Moreover, the results highlight the limitations associated with combining airflow tracking control with SPR control for room pressure regulation in multizone VAV systems. This highlights the importance of adopting a model-based approach to address the complexities of concurrent room pressure and indoor air temperature control.

A Review of Metaheuristic Optimization Techniques for Effective Energy Conservation in Buildings

The built environment is a significant contributor to global energy consumption and greenhouse gas emissions. Advancements in the adoption of environmentally friendly building technology have become crucial in promoting sustainable development. These advancements play a crucial role in conserving energy. The aim is to achieve an optimal design by balancing various interrelated factors. The emergence of innovative techniques to address energy conservation have been witnessed in the built environment. This review examines existing research articles that explore different metaheuristic optimization techniques (MOTs) for energy conservation in buildings. The focus is on evaluating the simplicity and stochastic nature of these optimization techniques. The findings of the review present theoretical and mathematical models for each algorithm and assess their effectiveness in problem solving. A systematic analysis of selected algorithms using MOT is conducted, considering factors that influence wellbeing, occupant health, and indoor environmental quality. The study examines the variations among swarm intelligence MOTs based on complexity, advantages, and disadvantages. The algorithms’ performances are based on the concept of uncertainty in consistently providing optimal solutions. The paper highlights the application of each technique in achieving energy conservation in buildings.

Driving forces behind the adoption of IEQ principles in building design: evidence from Nigerian quantity surveying firms

PurposeThe main objective of this study is to evaluate the driving forces behind the adoption of indoor environmental quality (IEQ) principles in building designs from the perspectives of Nigerian quantity surveying firms.Design/methodology/approachA quantitative approach was used which involved administering a well-structured questionnaire to a sample of 114 quantity surveyors. The collected data were analyzed using various statistical methods, including frequencies, percentages, mean item scores, Kruskal–Wallis test and exploratory factor analysis.FindingsThe top five ranked drivers were climate change mitigation, conservation of natural resources, reduction of waste and pollution, use of sustainable building materials and development of new materials and building systems. Based on the factor analysis, the study identified five clusters of drivers: (1) health and well-being drivers (2) economic drivers (3) environmental drivers (4) innovation and technology drivers and (5) regulatory drivers.Practical implicationsThe findings from this study suggest that to effectively integrate IEQ principles, quantity surveying firms should consider developing comprehensive guidelines and checklists that align with the identified drivers and clustered categories. These resources can serve as practical tools for project teams, facilitating a structured and holistic approach to the incorporation of IEQ factors throughout the project lifecycle.Originality/valueThe study’s identification of the top drivers and the subsequent clustering of these drivers into five distinct categories contributes to the existing body of knowledge on IEQ. This approach provides a structured framework for comprehensively understanding the factors influencing IEQ adoption, offering a valuable tool for researchers, policymakers and industry practitioners.

The Impact of Indoor Environmental Quality on Occupant Satisfaction in Commercial Buildings: A Comparison of Building Expert Opinions and Residents’ Experiences

This paper investigates the Indoor Environmental Quality (IEQ) factors influencing occupant satisfaction in commercial buildings in Iran, contrasting the views of building experts (architects and engineers) with those of building occupants. Employing the fuzzy analytical hierarchy process (FAHP), this study focuses on the four primary IEQ factors: thermal comfort, indoor air quality, visual comfort, and acoustic comfort. The study aims to bridge the gap between expert evaluations and occupant perceptions of IEQ factors in commercial buildings in Iran. By examining the disparities in prioritising IEQ factors between these two groups, the study sheds light on the complexities of IEQ assessment and highlights the importance of considering diverse perspectives in optimising indoor environments. Our methodology includes a survey conducted among 30 building experts (15 architects and 15 building engineers) and 102 occupants, employing FAHP to derive the relative importance weights of each IEQ factor. The results highlight significant disparities between architects, engineers, and occupants in prioritising these factors. Architects emphasise visual comfort (42%), while engineers and occupants view thermal comfort (53% and 41%) as the most crucial factor for occupant satisfaction. The study underscores the complexity of IEQ in commercial buildings and the diverse perspectives influencing its assessment. It contributes to the broader discourse on optimising IEQ, emphasising the need for a comprehensive approach that encompasses both technical expertise and occupant experience.

Leadership in Energy and Environmental Design Commercial Interior Version 4 (LEED-CI v4) Gold-Certified Office Space Projects: A Pairwise Comparative Analysis between Three Mediterranean Countries

Over the past five years, Leadership in Energy and Environmental Design Commercial Interior version 4 (LEED-CI v4)-certified office projects have been intensively studied in the USA and China, but they have not yet been studied in the Mediterranean region. The purpose of this study was to explore office building certification strategies for LEED-CI v4-certified projects in the Mediterranean region. The study design included pairwise comparative analyses between Spain (number of projects (n) n1 = 14), Türkiye (n2 = 13), and Israel (n3 = 11). Cliff’s δ and exact Wilcoxon–Mann–Whitney tests were used to process ordinal and discrete data, while the natural logarithm of the odds ratio and 2 × 2 Fisher’s exact tests were used to handle dichotomous data. It was found that Spain and Türkiye outperformed Israel in the Location and Transportation (LT) category due to their desire to reduce the use of private transport. Spain and Türkiye were ahead of Israel in the LTc5 “reduced parking footprint” credit (p = 0.008 and 0.0005, respectively). Israel outperformed Spain and Türkiye in the Energy and Atmosphere (EA) category due to the sum of all six EA credits (p = 0.086 and 0.010). Spain overtook Türkiye and Israel in the Materials and Resources (MRs) category due to Spain’s increased use of environmental product declarations. Spain and Türkiye were ahead of Israel in the following four MRs credits: MRc1 “long-term commitment” (p = 0.030), MRc2 “interiors life cycle impact reduction” (p = 0.037), MRc3 “building product disclosure and optimization—environmental product declarations” (p = 0.029), and MRc5 “building product disclosure and optimization—material ingredients” (p = 0.034). Spain, Türkiye, and Israel showed similarly low levels of achievement in the Indoor Environmental Quality (EQ) category (p ≥ 0.405). However, Spain and Türkiye outperformed Israel in the following two credits: EQc1 “enhanced indoor air quality strategies” and EQc2 “low-emitting materials” (p = 0.001 and 0.060, respectively). In parallel, Israel outperformed Türkiye in the EQc3 “construction indoor air quality management plan” (p = 0.026), and Israel outperformed Spain in the EQc8 “quality views” credit (p = 0.066). As a result, a pairwise comparison of the three Mediterranean countries showed that each country has a unique LEED certification strategy. Knowledge of the above green building strategies will be helpful for LEED professionals.

Assessing the post-COVID interaction between indoor environmental quality and occupants within educational buildings: A structural equation modeling approach

It is well-acknowledged that indoor environmental quality (IEQ) affects different aspects of occupants' lives, such as satisfaction, performance, and well-being. This acknowledgement is a result of extensive studies investigating IEQ interaction with occupants within different spaces, such as offices, commercial buildings, and homes. What is still missing are two aspects that IEQ studies should consider: (a) the post-COVID-19 era and the resulting anti-measures (COVID measures) and (b) the interaction of IEQ with occupants in academic libraries. This study aims to analyze the effects of COVID measures on the relationship between IEQ and occupants' satisfaction (learning performance), as well as their visiting habits at one of the largest academic libraries in Asia. To this end, two scenarios are developed to compare the effects of IEQ on occupants with and without COVID measures. This paper aims to address how COVID measures will shape the relationship between the IEQ of an academic library and its users’ satisfaction and visiting habits. This relationship is investigated using structural equation modeling based on 509 face-to-face surveys completed over the course of 4 months. Results suggest that COVID measures will produce a significant relationship between IEQ and satisfaction; however, higher satisfaction is reported when COVID measures are not applied. Both models show no significant relationship between IEQ and visiting habits. The proposed model will help in defining construction guidelines for libraries and educational buildings that promote IEQ conditions in the post-COVID era.

Indoor Environmental Quality Effect Analysis in Green and Non-green Office Building to Staff’s Performance and Satisfaction in Surabaya

The energy efficiency in an office building can decrease the company’s operational cost. Even so, the operational cost for staff is still larger than the cost for energy. It is important to reassure that the impact given by the building’s indoor environmental quality (IEQ) is positive to staff. This research focusses on two office building in Surabaya, one of them is designed using the green principles and calculations, and the other is not. The building’s IEQ aspects being inspected includes indoor air quality, thermal, lighting, acoustics and layout. A questionnaire survey was held to obtain the reaction from the full time staff regarding the building’s IEQ performance, their satisfaction to it and their self-assessed performance. There are IEQ aspects that affects staff’s performance and satisfaction significantly. The IEQ mean score differs significantly in green and non-green building, but the mean difference in satisfaction and performance were found not significant.

Editorial: Indoor environmental air quality in urban areas

Editorial: Indoor environmental air quality in urban areas

Emotion-oriented recommender system for personalized control of indoor environmental quality

Indoor Environmental Quality (IEQ) significantly influences health, cognitive abilities, and even moods. With the rise of smart homes and the Internet of Things (IoT), the need for personalized IEQ control has become paramount. Traditional systems, primarily focusing on explicit feedback (i.e., preference), often neglect the role of emotions in shaping this feedback. Therefore, this study presents the Emotion-oriented Recommender System for personalized control of IEQ (ERS-IEQ), based on the R-E-C-S ontology, focusing on (i) Recognizing user's continuous emotional states, (ii) Estimating emotional similarity between users, (iii) Collecting user's feedback on IEQ conditions, and (iv) Systemizing an emotion-oriented recommender system using a graph neural network. In order to confirm the predictive performance of the ERS-IEQ and verify its higher level of excellence compared to traditional recommender systems, a private dataset composed of IEQ conditions, users' explicit feedback, and users' emotional states was built via a human participant experiment using a climate chamber. As a result, the ERS-IEQ significantly enhances the recommender system's predictive performance, particularly in thermal preferences. The number of linguistic terms of emotional similarity has a profound effect on the system's predictions, with four terms proving most effective. In the near future, ERS-IEQ will play a role as a personal assistant in smart home automation, offering emotion-based recommendations. It addresses key challenges in traditional recommender systems, such as the cold start problem and rating sparsity, and ensures personalized adjustments to IEQ conditions in both private and public spaces.

Characterizing indoor environmental quality in Portuguese office buildings for designing an intervention program

Intervention studies have been explored to identify actions to effectively remediate indoor environmental quality (IEQ) problems and to improve people's health, well-being, comfort, and productivity. This study assessed a comprehensive set of IEQ indicators related to ventilation, air pollution, thermal comfort, illuminance, and noise for the first time in Portuguese office buildings. The purpose was to derive evidence-based corrective measures for a further environmental intervention program. The study monitored and surveyed 15 open-space offices from six modern office buildings in Porto (Portugal) during a workday between September and December 2022. Illuminance was of most concern among the assessed IEQ indicators since the measured levels were below the minimum limit required in 27% of the evaluated workplaces. For CO2, although mean concentrations were below 1000 ppm, absolute values exceeding that level were consistently registered in 20% of the offices during the afternoon period. Mean levels of PM2.5, PM10, and ultrafine particles exceeding the WHO guidelines were found in 13%, 7%, and 7% of the offices, respectively. The assessed thermal comfort levels were typically neutral, corresponding to an estimated mean of 6% of dissatisfied people. Based on the findings, an intervention plan was designed to be implemented in the further stages of this work. The priority interventions to test include relocation of printers (PM source removal), optimisation of ventilation rates (using real-time data from CO2 sensors), adjustment of desk positions to improve illuminance, and introduction of indoor plants.

Unraveling the complexities: Impacts of energy burden on the built environment challenges among assistance-dependent populations in the United Kingdom

The intricate relationship between energy burden (EB) and indoor environmental quality (IEQ) is vital for human well-being within the built environment. While previous studies have focused on vulnerable groups, individuals with health concerns have received limited attention. This interdisciplinary study delves into the disparities and cumulative impacts of EB, the built environment, and social demographics, with a particular focus on assistance-dependent populations (ADPs). Based on 2588 online respondents in the U.K. during the COVID-19 pandemic, our research unveils significant relationships between EB, heating insecurity, and perceived thermal discomfort. ADPs reported an average EB of 5.5% and poorer housing quality than their counterparts, with inadequate temperatures emerging as a primary concern. The correlation analysis highlights a strong connection between the perception of thermal discomfort and energy-saving behaviors. We also explored the interactions of EB, homeownership, and assistance-dependent status to uncover concentrated disadvantages in housing issues and identified vulnerable groups. Notably, irrespective of their EB, ADPs face more challenges than non-ADPs, highlighting the greater predictive significance of assistance-dependent status over EB. Moreover, our findings suggest that assistance-dependent renters constitute the most vulnerable group. Considering that ADPs already contend with preexisting physical illnesses, the revelation that they are more prone to experiencing higher EB and residing in inferior conditions is of utmost importance. It underscores the urgency of mitigating these additional health risks and ensuring the availability of a healthy and safe living environment for vulnerable demographics, thereby advancing the goal of equity within the built environment for overall well-being.

Indoor environmental comfort in an antarctic research station: A case study

The indoor environmental quality of research stations requires attention and constant improvement due to the harsh polar climatic conditions. We conducted a case study at an Antarctic research station from March 2021 to November 2022. Indoor and outdoor condition monitoring and questionnaire surveys with the occupants were conducted to obtain environmental parameters and subjective evaluations. Twenty-six participants were surveyed, and 355 sets of measurement data and subjective questionnaires were obtained. An analysis of environmental evaluations and adaptation behaviors demonstrated that more than 80% of the participants expected the indoor temperature to remain unchanged, and over 40% desired improvements in humidity, air quality, and overall environmental quality. Opening windows was the most common environmental adaptation behavior made by participants. However, they had high expectations for the overall environment, indicating the demand for diverse and effective environmental adaptive options in interior design. Moreover, we analyzed the weighting coefficients of the influence of various environmental evaluations on overall environmental perceptions and the correlations between them. The results revealed the importance of the thermal environment and air quality on overall evaluations. Regressions yielded thermal neutral temperature ranges of 18.4–21.3 °C and acceptable temperature ranges, at which 90% of participants were satisfied, of 21.6–26.7 °C. These results could guide future assessments of the indoor environmental comfort at Antarctic stations and help create polar building environments suitable for work and life.

Analysis of Thermal Comfort Among Workshop Users: At TVET Technical Institution

Thermal comfort is a part of indoor environmental quality that should be considered to ensure the occupants' well-being. Unconducive buildings not only bring occupants discomfort but also tend to affect health, disrupt the process of teaching and learning, and reduce work productivity. Thus, this study determines the thermal condition of existing workshop buildings used in Technical and Vocational Education and Training (TVET) implementation. ASHRAE Standard 55 (2017) is referred to in the determination of thermal comfort involving objective measurements and subjective measurements. Observation methods of environmental variables such as air temperature, radiant temperature, air velocity, relative humidity is observed. Evaluations of comfort are based on occupant surveys and environmental measurements. A total of 257 people completed a questionnaire distributed at three technical institutions in Kedah, Malaysia. According to the findings, the average thermal sensation vote is 1.85, which leads to 66.5% of respondents feeling discomfort. Meanwhile, the adaptive model analysis showed that the workshop environmental conditions were out of the comfort zone and did not comply with the ASHRAE 55 standard. Hence, the thermal discomfort factors from the occupants' perspective were identified and widely discussed. As a result, the research findings will benefit parties involved in new building construction or existing building renovations to improve indoor air quality.

Energy consumption and environmental parameters in Madrid social housing. Performance in the face of extreme weather events

Housing energy rehabilitation is currently a priority in Europe. In vulnerable neighbourhoods, improving energy efficiency and comfort conditions has an important impact on people living conditions. Rehabilitation strategies are usually designed according to standard scenarios, without taking into account variations related to the users or the type of building. Monitoring this type of housing offers valuable information to be able to select the best strategies based on a diagnosis of their real performance.In this paper we present one year data on energy consumption, hygrothermal comfort and CO2 monitored for 22 dwellings in Madrid, located in six different vulnerable locations. In addition to normal periods, the monitoring campaign includes periods of extreme heat and cold, and two exceptional situations, the “Filomena" snowfall and the COVID pandemic period.The results report poor indoor environmental quality in these dwellings, both in the main rooms and in the bedrooms. Also poor building quality is observed. The recorded energy consumption is lower than that given as a reference in the standards or models, at the cost of a worse indoor environment. The analisys supports the importance of retrofit strategies that take into account the composition of the household, such as single-person households or those with children, the higher vulnerability of dwellings with higher demand, the subjective perception and the role of users, and the need to incorporate improvements in indoor air renewal.

Exploring occupant detection model generalizability for residential buildings using supervised learning with IEQ sensors

This study explores two modeling approaches for occupancy detection at room level for residential buildings in Denmark. The aim is to assess the performance and generalizability of occupant detection models using XGBoost method trained on a rich dataset comprising indoor environmental quality (IEQ) variables and occupancy ground truth. A global approach (all rooms) and a room-specific approach are considered. After a thorough feature- selection and importance analysis process, the occupancy detection models (ODMs) are trained and tested in a nested cross-validation schema. The time of the day, indoor CO2 concentration, and feature transforms related to short-term IEQ dynamics were found to be the most important features of the ODMs. Both the global and room-specific models show good occupancy prediction performance, especially for bedrooms. When tested for generalizability with an unseen dataset from a different residential building, the ODMs maintain very good performance for the bedroom but not for the office room. This discrepancy could be explained by significant differences in occupancy and ventilation patterns, and large air infiltration from adjacent rooms. Although currently limited in terms of generalizability, XGBoost-based ODMs using IEQ data have the potential to provide robust and scalable occupancy detection for occupant-centric control and occupant-aware building performance assessments. The IEQ dataset with occupancy ground truth collected for this study is made available in open access.

Exploring green office buildings at Sebelas Maret University: A study on students’ perception

Indoor environmental quality (IEQ) can positively influence occupant satisfaction levels in green-rated buildings. IEQ determines how occupants perceive the interior environment. This study investigated students’ perceptions of green office buildings at Sebelas Maret University. Sixty-eight respondents were involved, consisting of 15 male and 53 female students. Four green office building indicators, namely building features, financial support and commitment, health and well-being, and image and branding, were used as predictor variables, while corporate social responsibility was the dependent variable. Pearson correlation was used for the validation test, and Cronbach’s alpha was used for the reliability test (α = .05). The data were analyzed using multiple regression, taking into account prerequisite tests including normality, linearity, heteroscedasticity, multicollinearity, and autocorrelation. All items were valid and reliable, and all prerequisite tests were met. The results showed that the four independent variables simultaneously have a significant influence on corporate social responsibility (F = 25.78, p < .05). Partially, three predictor variables have significant correlations with the dependent variable: building features (t = 2.86, p < .05), health and well-being (t = 2.03, p < .05), and image and brand (t = 5.16, p < .05). The variables of financial support and commitment have no significant effect on the dependent variable (t = -.32, p > .05). The adjusted R squared value is 0.60, which means that the four independent variables affect the dependent variable by 60%, and 40% is influenced by other variables not included in this study.

The Influence of Visitors on Heritage Conservation: The Case of the Church of San Juan del Hospital, Valencia, Spain

One of the greatest challenges in heritage management is to find a balance between the demands of visitor access and heritage conservation. The income generated prevents decay and benefits the conservation of buildings. At the same time, cultural tourism can accelerate the deterioration of buildings from increased use and an increase in agents harmful to conservation. This unique research analyses the influence of building use at San Juan del Hospital, the oldest church in the city of Valencia. Its architectural characteristics and the climate of the city mean that visits to the building put the conservation of its heritage assets at risk. Monitoring data from the summer months were put into a digital twin generated from a heritage building information model (HBIM), and the modelling of visitor numbers and the impact on indoor environmental quality was conducted. Monitoring and simulations confirmed that visitor numbers need to be reduced or mechanical conditioning systems need to be installed to prevent damage to the heritage artefacts within the building. This research provides building managers with information to make informed decisions about the preventive maintenance of heritage buildings. This research also demonstrates for the first time the value of using monitoring and a digital twin for conservation management.