Individual Frequency Channels Research Articles

РЕГУЛЮВАННЯ НАПРУГИ ТА РЕАКТИВНОЇ ПОТУЖНОСТІ В РОЗПОДІЛЬНИХ ЕЛЕКТРИЧНИХ МЕРЕЖАХ ШЛЯХОМ ВИКОРИСТАННЯ РОЗОСЕРЕДЖЕНИХ ВІДНОВЛЮВАНИХ ДЖЕРЕЛ ЕНЕРГІЇ

The problems of mode regulation of distribution networks in Ukraine are investigated in this paper. Authors propose to regulate the modes of distribution networks by the means of convertors of renewable energy sources (solar power plants etc.) connected to this networks according to the Smart Grid concept. The analysis of multicriteria mode optimization results of the distribution network was performed and the most perspective criterion were selected according to the features of structure and functioning of distribution networks in Ukraine. The target function of multicriteria optimization by the criteria of minimization of reactive power on the main section of the line and minimization of standard voltage deviations from the nominal value is formalized by the authors. To calculate the optimal value for the target function, the Multivariable extremum seeking control method was chosen, this method was improved by adding additional filters of individual frequency channels. An example of calculations is given in the paper; it illustrates the efficiency of the proposed method of modes regulating of the distribution networks. References 24, figures 3, tables 2.

Multi-Link Operation with Enhanced Synchronous Channel Access in IEEE 802.11be Wireless LANs: Coexistence Issue and Solutions.

Multi-link operation is a new feature of IEEE 802.11be Extremely High Throughput (EHT) that enables the utilization of multiple links using individual frequency channels to transmit and receive between EHT devices. This paper aims to illustrate enhanced multi-link channel access schemes, identify the associated coexistence challenge, and propose solutions. First, we describe the multi-link operation of IEEE 802.11be and how the asynchronous and synchronous channel access schemes facilitate multi-link utilization. Next, we describe the design variants of the synchronous channel access scheme and demonstrate the associated coexistence challenge. Subsequently, we propose four features to address this challenge by assigning penalties to multi-link devices (repicking a backoff count, doubling the contention window size, switching to another contention window set, and compensating the backoff count) as well as five coexistence solutions derived from combinations of these features. Comparative simulation results are provided and analyzed for dense single-spot and indoor random deployment scenarios, demonstrating that the throughput and latency gains of multi-link operation differ between schemes. At the same time, we investigate the coexistence performance of multi-link operation with and without the capability of simultaneous transmission and reception and demonstrate that the proposed solutions mitigate the coexistence problem. In particular, compensating the backoff count achieves the highest coexistence performance among the proposed solutions, with a marginal throughput decrease of multi-link devices. A metric for evaluating both the throughput and latency gains and the coexistence performance of a multi-link channel access scheme using a single value is also proposed.

Compendious Concurrent Dual-Band Receiver Based on Multiport Interferometric Architecture

A distinct usage of the conventional multiport architecture is introduced in this work to explore the compendious scheme of a concurrent dual-band interferometric receiver. Dual RF signals at individual frequency channels are received simultaneously, and only a single low-power local oscillator (LO) source is deployed for frequency translation or conversion to the same intermediate frequency (IF) band. Although these signals are spectrally overlapped, they can be extracted with a simple and efficient algorithm with good channel-to-channel isolations. Compared to the conventional multiport configuration, the power detectors are replaced by analog-to-digital converters (ADCs) to process the signals in this proposed scheme. The underlying physics of the concurrent receiving operation is explained and derived analytically. Some experiments are also presented to investigate various performance indexes, including signal linearity, noise behavior, interchannel interference, and so forth. Lastly, multiple M-quadratic-amplitude modulation (QAM) signals are applied to evaluate the communication behavior of the proposed receiver architecture. Distortions due to frequency drift, channel imbalance, and in-phase and quadrature (IQ) imbalance are studied, and bit-error-rates (BER) are measured and compared with their theoretical counterparts. All obtained results confirm that the proposed interferometric receiver provides good communication performances.

E-MICE: Energy-Efficient Concurrent Exploitation of Multiple Wi-Fi Radios

The concurrent use of multiple Wi-Fi radios in individual frequency channels is a solution readily available today to the increase of a mobile station’s communication capacity, but at the expense of occasional performance deterioration (when the heterogeneity of capacity between interfaces gets severe) and additional power consumption. This paper proposes a mobile-side solution for the concurrent use of multiple radios in a performance-aware and energy-efficient manner, with which a mobile station activates and deactivates radio interfaces dynamically according to traffic demands and a predicted capacity gain. To this end, the proposed solution is composed of multiple prediction algorithms and a control algorithm. Prediction when activating an additional radio interface is relatively difficult since no information of the disabled interface’s current status (and the corresponding frequency channel’s) is available at the time of prediction. Our experiments show that, despite different types and used channels, different radio interfaces have a strong correlation of received signal strengths and used PHY rates between them. Based on this observation, the proposed solution learns a correlation pattern between interfaces whenever multiple interfaces are active and makes prediction of the coverage, expected PHY rate and capacity impact of an inactive interface based on the learned correlation with a currently active interface. The design of the prediction algorithms are based on a simple or machine-learning technique (SVM). The control algorithm then keeps monitoring the utilization of active interfaces and, if any of them has utilization over a threshold, checks if each inactive interface is within coverage and a valid rate range based on an active interface’s received signal strength. Finally, an action of a configuration change (either activation, deactivation, or no change) selected based on the prediction of the resulting capacity is applied. Testbed experiments using COTS dual-band Wi-Fi interfaces demonstrate that the solution can enhance throughput by up to 29.6 percent (in a close distance to AP) and at most halve power consumption compared to legacy aggregation while the gain varies depending on the location and traffic conditions.

Finding a faint polarized signal in wide-band radio data

We develop two algorithms, based on maximum likelihood (ML) inference, for estimating the parameters of polarized radio sources which emit at a single rotation measure (RM), e.g., pulsars. These algorithms incorporate the flux density spectrum of the source, either a power law or a scaled version of the Stokes I spectrum, and a variation in sensitivity across the observing band. We quantify the detection significance and measurement uncertainties in the fitted parameters, and we derive weighted versions of the RM synthesis algorithm which, under certain conditions, maximize the likelihood. We use Monte Carlo simulations to compare injected and recovered source parameters for a range of signal-to-noise ratios, investigate the quality of standard methods for estimating measurement uncertainties, and search for statistical biases. These simulations consider one frequency band each for the Australia Telescope Compact Array (ATCA), the Square Kilometre Array (SKA), and the Low Frequency Array (LOFAR). We find that results obtained for one frequency band cannot be easily generalized, and that methods which were developed in the past for correcting bias in individual frequency channels do not apply to wide-band data sets. The standard method for estimating the measurement uncertainty in RM is not accurate for sources with non-zero spectral indices. Furthermore, dividing Stokes Q and U by Stokes I to correct for spectral index effects, in combination with RM synthesis, does not maximize the likelihood.

Attention selectively modulates cortical entrainment in different regions of the speech spectrum

Recent studies have uncovered a neural response that appears to track the envelope of speech, and have shown that this tracking process is mediated by attention. It has been argued that this tracking reflects a process of phase-locking to the fluctuations of stimulus energy, ensuring that this energy arrives during periods of high neuronal excitability. Because all acoustic stimuli are decomposed into spectral channels at the cochlea, and this spectral decomposition is maintained along the ascending auditory pathway and into auditory cortex, we hypothesized that the overall stimulus envelope is not as relevant to cortical processing as the individual frequency channels; attention may be mediating envelope tracking differentially across these spectral channels. To test this we reanalyzed data reported by Horton et al. (2013), where high-density EEG was recorded while adults attended to one of two competing naturalistic speech streams. In order to simulate cochlear filtering, the stimuli were passed through a gammatone filterbank, and temporal envelopes were extracted at each filter output. Following Horton et al. (2013), the attended and unattended envelopes were cross-correlated with the EEG, and local maxima were extracted at three different latency ranges corresponding to distinct peaks in the cross-correlation function (N1, P2, and N2). We found that the ratio between the attended and unattended cross-correlation functions varied across frequency channels in the N1 latency range, consistent with the hypothesis that attention differentially modulates envelope-tracking activity across spectral channels.

Temporal characterization of a multi-wavelength Brillouin–erbium fiber laser

This paper provides the first detailed temporal characterization of a multi-wavelength-Brillouin–erbium fiber laser (MWBEFL) by measuring the optical intensity of the individual frequency channels with high temporal resolution. It is found that the power in each channel is highly unstable due to the excitation of several cavity modes for typical conditions of operation. Also provided is the real-time measurements of the MWBEFL output power for two configurations that were previously reported to emit phase-locked picosecond pulse trains, concluded from their autocorrelation measurements. Real-time measurements reveal a high degree of instability without the formation of a stable pulse train. Finally, we model the MWBEFL using coupled wave equations describing the evolution of the Brillouin pump, Stokes and acoustic waves in the presence of stimulated Brillouin scattering, and the optical Kerr effect. A good qualitative consistency between the simulation and experimental results is evident, in which the interference signal at the output shows strong instability as well as the chaotic behavior due to the dynamics of participating pump and Stokes waves.

Reverberation suppression in cochlear implants using a blind channel-selection strategy

Reverberation severely degrades speech intelligibility for cochlear implant (CI) users. The ideal reverberant mask (IRM), a binary mask for reverberation suppression which is computed using signal-to-reverberant ratio, was found to yield substantial intelligibility gains for CI users even in highly reverberant environments (e.g., T60 = 1.0 s). Motivated by the intelligibility improvements obtained from IRM, a monaural blind channel-selection criterion for reverberation suppression is proposed. The proposed channel-selection strategy is blind, meaning that prior knowledge of neither the room impulse response nor the anechoic signal is required. By the use of a residual signal obtained from linear prediction analysis of the reverberant signal, the residual-to-reverberant ratio (RRR) of individual frequency channels was employed as the channel-selection criterion. In each frame, the channels with RRR less than an adaptive threshold were retained while the rest were zeroed out. Performance of the proposed strategy was evaluated via intelligibility listening tests conducted with CI users in simulated rooms with two reverberation times of 0.6 and 0.8 s. The results indicate significant intelligibility improvements in both reverberant conditions (over 30 and 40 percentage points in T60 = 0.6 and 0.8 s, respectively). The improvement is comparable to that obtained with the IRM strategy.

DETECTION OF NEW POINT SOURCES INWMAP7 YEAR DATA USING INTERNAL TEMPLATES AND NEEDLETS

We have developed a new needlet based method to detect point sources in cosmic microwave background (CMB) maps and have applied it to the WMAP 7 year data. We use both the individual frequency channels as well as internal templates, the difference between pairs of frequency channels, with the advantage that the CMB component is eliminated. Using the area of the sky outside the Kq85 galactic mask, we detect a total of 2102 point sources at the $5\sigma$ level in either the frequency maps or the internal templates. Of these, 1116 are detected either at $5\sigma$ directly in the frequency channels or at $5\sigma$ in the internal templates and $\geq3\sigma$ at the corresponding position in the frequency channels. Of the 1116 sources, 603 are detections which have not been reported so far in WMAP data. We have made a catalogue of these sources available with position and flux estimated in the WMAP channels where they are seen. In total, we identified 1029 of the 1116 sources with counterparts at 5GHz and 69 at other frequencies.

Sound Texture Perception via Statistics of the Auditory Periphery: Evidence from Sound Synthesis

Rainstorms, insect swarms, and galloping horses produce "sound textures"--the collective result of many similar acoustic events. Sound textures are distinguished by temporal homogeneity, suggesting they could be recognized with time-averaged statistics. To test this hypothesis, we processed real-world textures with an auditory model containing filters tuned for sound frequencies and their modulations, and measured statistics of the resulting decomposition. We then assessed the realism and recognizability of novel sounds synthesized to have matching statistics. Statistics of individual frequency channels, capturing spectral power and sparsity, generally failed to produce compelling synthetic textures; however, combining them with correlations between channels produced identifiable and natural-sounding textures. Synthesis quality declined if statistics were computed from biologically implausible auditory models. The results suggest that sound texture perception is mediated by relatively simple statistics of early auditory representations, presumably computed by downstream neural populations. The synthesis methodology offers a powerful tool for their further investigation.

A channel-selection criterion for suppressing reverberation in cochlear implants

Little is known about the extent to which reverberation affects speech intelligibility by cochlear implant (CI) listeners. Experiment 1 assessed CI users' performance using Institute of Electrical and Electronics Engineers (IEEE) sentences corrupted with varying degrees of reverberation. Reverberation times of 0.30, 0.60, 0.80, and 1.0 s were used. Results indicated that for all subjects tested, speech intelligibility decreased exponentially with an increase in reverberation time. A decaying-exponential model provided an excellent fit to the data. Experiment 2 evaluated (offline) a speech coding strategy for reverberation suppression using a channel-selection criterion based on the signal-to-reverberant ratio (SRR) of individual frequency channels. The SRR reflects implicitly the ratio of the energies of the signal originating from the early (and direct) reflections and the signal originating from the late reflections. Channels with SRR larger than a preset threshold were selected, while channels with SRR smaller than the threshold were zeroed out. Results in a highly reverberant scenario indicated that the proposed strategy led to substantial gains (over 60 percentage points) in speech intelligibility over the subjects' daily strategy. Further analysis indicated that the proposed channel-selection criterion reduces the temporal envelope smearing effects introduced by reverberation and also diminishes the self-masking effects responsible for flattened formants.

Simultaneous grouping and auditory continuity

Are the conditions for illusory auditory continuity entirely local in frequency, or are judgments of continuity made on auditory objects? Listeners made continuous/pulsating judgments on a variety of complex tones that repeatedly alternated with a 100- to 500-Hz bandpass noise. A sufficiently quiet complex tone was heard as continuous when all its harmonics fell within the frequency range of the noise. Adding harmonics outside the noise's frequency range substantially reduced the impression of continuity, which was largely restored when these additional components were given a different fundamental frequency. Judgments of auditory continuity thus appear to be based on entire simultaneously grouped objects, rather than being determined solely by local criteria based on individual frequency channels.

Dependence of auditory brainstem response on click polarity and high-frequency sensorineural hearing loss.

An investigation is presented on the effect of click polarity upon the auditory brainstem response (ABR) in cases of simulated high-frequency hearing loss. A high-frequency hearing loss was stimulated in 12 normal subjects by applying a high-pass noise masker, the noise cutoff frequency being varied in half-octave steps through the range of audiometric frequencies. With this paradigm, the effects of click polarity on the ABR are similar to those reported in patients with high-frequency hearing loss, including changes in waveform morphology and substantial peak latency shifts. To evaluate the role of individual cochlear frequency channels in a more direct way, half-octave narrow-band responses were determined by pair-wise subtraction of the high-pass-noise-masked responses. As far as ABR peak latencies are concerned, stimulus polarity effects tend to increase towards the lower frequency bands. Thus, the selective elimination of the contribution to the ABR of cochlear high-frequency channels can be held responsible for the increased dependence of ABR on click polarity observed in high-frequency hearing loss. However, statistical evaluation of peak I, III and V latencies, both in high-pass-noise-masked and in narrow-band ABRs, reveals that the latency effects are not systematic between subjects. Mechanisms producing the observed rarefaction-condensation differences, possible explanations for the large intersubject variability and the consequences for clinical interpretation of ABR are discussed.

Sub-carrier discriminators for telemetry

Frequency Division Multiplexing systems require some form of sub-carrier discriminators to recover the data from the individual frequency channels. A four-channel FM/AM telemetry system has been designed and developed for use in rocket-borne instrumentation and for data analysis four sub-carrier discriminators have been made. An unbalanced trigger circuit type ot discriminator is found to be preferable to the conventional Foster-Seely discriminator or the counting type discriminator. The channel selection is carried out by using passive filters which have been designed for the required characteristics. The output is amplified by a D.G. amplifier and feeds directly a pen-recorder. Overall performance is quite satisfactory, with a dynamic input range of 30 db., and an inter-channel rejection of 40 db. Linearify is better than 2% in the channel. The performance can be considerably improved by the use of better filters which is actually the limiting factor now.