Increase In Anisotropy Parameter Research Articles

Nonlinear oscillations of electrically driven aniso-visco-hyperelastic dielectric elastomer minimum energy structures

In view of their unique shape morphing behaviour, dielectric elastomer-based minimum energy structures (DEMES) have received an increasing attention in the technology of electroactive soft transduction. Because several of them undergo a time-dependent motion during their operation, understanding their nonlinear dynamic behaviour is crucial to their effective design. Additionally, in the recent past, there has been a growing scientific interest in imparting anisotropy to the material behaviour of dielectric elastomers in view of ameliorating their actuation performance. Spurred with these ongoing efforts, this paper presents an analytical framework for investigating the nonlinear dynamic behaviour of aniso-visco-hyperelastic DEMES actuator with an elementary rectangular geometry. We use a rheological model comprising two Maxwell elements connected in parallel with two single spring elements for modelling the material behaviour of the DE membrane. The governing equations of motion for the underlying non-conservative system are then derived using the Euler–Lagrange equation. The proposed model is used for building insights into the attainable equilibrium states, periodicity of the response as well as the resonant behaviour of the DEMES actuator over a feasible range of anisotropy and viscosity parameters. Our results reveal that the DEMES with hyperelastic material properties exhibits a supercritical pitchfork bifurcation of equilibrium state which is further accelerated in terms of attained equilibrium angle due to membrane anisotropy. A significant enhancement in the equilibrium angle attained by the structure with the extent of membrane anisotropy parameter is observed, indicating a favourable impact of material anisotropy. Poincare maps and phase-portraits are presented for assessing the periodicity of the nonlinear oscillations. The frequency response of the actuator for a combined DC and AC load indicates an upsurge in the resonant frequency with an increase in anisotropy parameter. The underlying analytical model and the trends presented in this study can find their potential use in the design and development of the futuristic anisotropic DEMES actuators subjected to time-dependent actuation.

Instabilities in viscosity-stratified two-fluid channel flow over an anisotropic-inhomogeneous porous bottom

A linear stability analysis of a pressure driven, incompressible, fully developed laminar Poiseuille flow of immiscible two-fluids of stratified viscosity and density in a horizontal channel bounded by a porous bottom supported by a rigid wall, with anisotropic and inhomogeneous permeability, and a rigid top is examined. The generalized Darcy model is used to describe the flow in the porous medium with the Beavers-Joseph condition at the liquid-porous interface. The formulation is within the framework of modified Orr-Sommerfeld analysis, and the resulting coupled eigenvalue problem is numerically solved using a spectral collocation method. A detailed parametric study has revealed the different active and coexisting unstable modes: porous mode (manifests as a minimum in the neutral boundary in the long wave regime), interface mode (triggered by viscosity-stratification across the liquid-liquid interface), fluid layer mode [existing in moderate or O(1) wave numbers], and shear mode at high Reynolds numbers. As a result, there is not only competition for dominance among the modes but also coalescence of the modes in some parameter regimes. In this study, the features of instability due to two-dimensional disturbances of porous and interface modes in isodense fluids are explored. The stability features are highly influenced by the directional and spatial variations in permeability for different depth ratios of the porous medium, permeability and ratio of thickness of the fluid layers, and viscosity-stratification. The two layer flow in a rigid channel which is stable to long waves when a highly viscous fluid occupies a thicker lower layer can become unstable at higher permeability (porous mode) to long waves in a channel with a homogeneous and isotropic/anisotropic porous bottom and a rigid top. The critical Reynolds number for the dominant unstable mode exhibits a nonmonotonic behaviour with respect to depth ratio. However, it increases with an increase in anisotropy parameter ξ indicating its stabilizing role. Switching of dominance of modes which arises due to variations in inhomogeneity of the porous medium is dependent on the permeability and the depth ratio. Inhomogeneity arising due to an increase in vertical variations in permeability renders short wave modes to become more unstable by enlarging the unstable region. This is in contrast to the anisotropic modulations causing stabilization by both increasing the critical Reynolds number and shrinking the unstable region. A decrease in viscosity-stratification of isodense fluids makes the configuration hosting a less viscous fluid in a thinner lower layer adjacent to a homogeneous, isotropic porous bottom to be more unstable than the one hosting a highly viscous fluid in a thicker lower layer. An increase in relative volumetric flow rate results in switching the dominant mode from the interface to fluid layer mode. It is evident from the results that it is possible to exercise more control on the stability characteristics of a two-fluid system overlying a porous medium in a confined channel by manipulating the various parameters governing the flow configurations. This feature can be effectively exploited in relevant applications by enhancing/suppressing instability where it is desirable/undesirable.

Shear dynamics in higher dimensional FLRW cosmology

We study the shear dynamics of higher dimensional Friedmann-Lema\^{i}tre-Robertson-Walker (FLRW) cosmology by considering a non-perfect fluid which exerts different pressure in the normal and extra dimensions. We generalise the definition of shear tensor for higher dimensional space-time and prove it to be consistent with the evolution equation for shear tensor obtained from the Ricci identities. The evolution of shear tensor is investigated numerically. The role of extra dimensions and other parameters involved in shear dynamics is discussed in detail. We find that with increase in anisotropy parameter, time of decay of shear increases while with increase in number of extra dimensions, shear tends to decay early.

Anisotropic Fluid Star Model in Isotropic Coordinates

We present a spherically symmetric solution of the general relativistic field equations in isotropic coordinates for anisotropic neutral fluid, compatible with a super dense star modeling by considering a specific choice of anisotropy factor  that includes a positive constant “” defined as anisotropy parameter, which varies the relation between the radial and tangential pressure. Further, we have constructed a super-dense star model with all degree of suitability. We have found that the maximum mass decreases with the increase of anisotropy parameter (α). The robustness of our result is that it matches with the recent discoveries.

Thermohaline convection with cross-diffusion in an anisotropic porous medium

Using normal mode technique it has been shown that (i) values of the anisotropy parameter are important in deciding the mode of convection in a doubly diffusive fluid saturating a porous medium. (ii) Depending on the values of the Soret and Dufour parameters, an increase in anisotropy parameter either promotes or inhibits instability, (iii) cross-diffusion induces instability even in a potentially stable set-up and (iv) for certain values of the Dufour and Soret parameters there is a discontinuity in the critical thermal Rayleigh number, which disappears if the porous medium has horizontal isotropy.

Equilibrium properties of hard non-sphere fluids

Derivation of the thermodynamic properties of fluids of hard non-spherical molecules of arbitrary symmetry is based on the decoupling approximation. Theoretical expressions are given and calculations made for the equation of state and virial coefficients for hard ellipsoids. These results are compared with Monte Carlo values and show fair agreement in all cases. The theoretical predictions for the equation of state for binary mixtures are compared with the Monte Carlo results for hard spheres and hard prolate spherocylinders. Theoretical expressions for the first order quantum correction to the free energy, pressure and virial coefficients are also given. The quantum effects increase with increase of density and with increase of anisotropy parameter.