Inclination Measurements Research Articles

A Testbed for Tidal Migration: The 3D Architecture of an Eccentric Hot Jupiter HD 118203 b Accompanied by a Possibly Aligned Outer Giant Planet

Characterizing outer companions to hot Jupiters plays a crucial role in deciphering their origins. We present the discovery of a long-period giant planet, HD 118203 c ( mc=11.79−0.63+0.69MJ , ac=6.28−0.11+0.10 au) exterior to a close-in eccentric hot Jupiter HD 118203 b (P b = 6.135 days, m b = 2.14 ± 0.12 M J, r b = 1.14 ± 0.029 R J, e b = 0.31 ± 0.007) based on 20 yr radial velocities (RVs). Using Rossiter–McLaughlin (RM) observations from the Keck Planet Finder, we measured a low sky-projected spin–orbit angle λb=−11°7−10.0+7.6 for HD 118203 b and detected stellar oscillations in the host star, confirming its evolved status. Combining the RM observation with the stellar inclination measurement, we constrained the true spin–orbit angle of HD 118203 b as Ψ b < 33.°5 (2σ), indicating the orbit normal of the hot Jupiter nearly aligned with the stellar spin axis. Furthermore, by combining RVs and Hipparcos-Gaia astrometric acceleration, we constrained the line-of-sight mutual inclination between the hot Jupiter and the outer planet to be 9.°8−9.3+16.2 at the 2σ level. HD 118203 is one of first hot Jupiter systems where both the true spin–orbit angle of the hot Jupiter and the mutual inclination between inner and outer planets have been determined. Our results are consistent with a system-wide alignment, with low mutual inclinations between the outer giant planet, the inner hot Jupiter, and the host star. This alignment, along with the moderate eccentricity of HD 118203 c, implies that the system may have undergone coplanar high-eccentricity tidal migration. Under this framework, our dynamical analysis suggests an initial semimajor axis of 0.3–3.2 au for the proto–hot Jupiter.

Scapular morphology is associated with certain patterns of glenohumeral osteoarthritis, but not with full-thickness rotator cuff tears

BackgroundThe role of anatomic factors in rotator cuff (RC) pathology or in the development of shoulder osteoarthritis (OA) is not yet well understood or recognized. While two-dimensional imaging and measurements are easy to capture and interpret, three-dimensional (3D) methods provide a more thorough description and analysis of the scapula’s complex shape. The purpose of this study is to investigate whether scapular anatomy is associated with RC tears or glenohumeral OA using 3D statistical shape modelling (SSM). MethodsA total of 126 computed tomography (CT)-scans of complete scapulae were captured from three cohorts: RC pathology, OA, and control (C). The RC cohort included patients with posterosuperior RC tears, the OA cohort included patients with glenohumeral OA, and the C cohort included patients without shoulder pathology, imaged for other purposes. The RC and OA cohorts each included 55 patients matched by age and gender, while the C cohort included 16 patients, without a specific matching. A full segmentation of each scapula was manually created and 3D surfaces were reconstructed for input to a SSM analysis. SSM-based correspondence particles were analyzed using principal component analysis (PCA) and linear discriminant analysis (LDA). Various landmarks were manually identified on each scapula. From these landmarks, 3D measurements of glenoid version and inclination, critical shoulder angle (CSA), acromial angle, among others, were obtained. Measurements were compared between the three cohorts using ANOVA or Student’s T-test, as appropriate. ResultsThere were no statistically significant differences in mean age (RC:57±9, OA:58±8 and C:61±7 years) or gender proportion (males:RC:51%, OA:51% and C:75%) between the three cohorts. 13 PCA modes captured significant shape variation (83.3% of overall variation) of the scapula. The LDA was significantly different between OA and both RC and C (RC:1.0±1.4, OA: -1.0±1.9 and C:1.4±1.2). Compared to C, the OA cohort had smaller CSA (24.9±6.1° vs. 32.4±4.3°; p<0.001), larger acromion angle (65.4±9.3° vs. 57.4±9.5°; p=0.019), among other parameters. Compared to RC, the OA cohort also had less distance between coracoid and acromion (47.2±5.8° vs. 44.2±6.4°; p=0.026), as well as similar morphological differences as to the C cohort. There were no significant differences between RC and C cohort. ConclusionsPCA and LDA applied to manually segmented scapulae revealed statistically significant differences in scapular morphology between OA and control scapulae (a more superior and more horizontal acromion with a lower CSA), but only minimal differences between RC and control scapulae (except a more anterior anterolateral corner of the acromion).

Improving the accuracy of dynamic inclination measurement by machine learning

With the diminishing availability of oil and gas resources, the Rotary Steerable System has become increasingly important. However, the vibrations and shocks during the drilling process pose challenges to the Measurement While Drilling. In recent years, the application of machine learning in the field of petroleum exploration has gradually expanded, especially in the estimation of geological parameters and lithology discrimination. However, there is still limited research on drilling tool attitude measurement. To address the above-mentioned issues, this study proposes a method that combines drilling tool attitude sensor data with artificial neural networks to improve the accuracy of dynamic inclination measurement. This method utilizes machine learning techniques, combining real-time z-axis acceleration signals and magnetic induction signals, and employs a deep learning model to invert the x and y-axis acceleration signals, thereby achieving high-precision measurement of dynamic inclination angles. Experimental results show that Long Short-Term Memory model, under simulated measurement conditions with different rotational speeds, yields dynamic inclination curve errors ranging from 0.4° to 0.7°, significantly reducing the errors compared to the original measurements. This method not only improves the accuracy of inclination angle measurement but also demonstrates strong adaptability to different rotational speeds, providing more accurate data support for drilling operations.

Precision, quantitative measurement of sunflower capitulum inclination: A trigonometry‐based approach

AbstractSunflower (Helianthus annuus) is a widely cultivated crop that exhibits a trait known as capitulum (or head) inclination at maturity. This trait is influenced by various structural factors, including head weight, stem traits, and plant height. A sunflower head should be at an angle at which the head faces the ground to avoid damage from the sun and birds. While this desired inclination range is known, current methods, including visual estimation and a model of measuring inclined length of the stem, fail to provide precise measurements of angle. This study introduces novel approaches to mathematically measure the head inclination angle. The research, which was conducted over the 2022 and 2023 growing seasons, involved an aluminum rod equipped with a ruler and a digital protractor to measure various height and angle components. Using the data collected, three methods were applied for measuring inclination: a previously published model as a control, a trigonometry‐based approach using angle and height measurements, and other model‐based approaches. A linear model resulted in a formula to calculate the head angle of any plant based solely on two height measurements, the highest point of the plant at both bloom (R5) and maturity (R9). Calculations of heritability and correlation suggest this method has created a precise alternative to existing estimation methods. The resulting formula has the potential to be paired with measurements from high‐throughput phenotyping methods, such as those facilitated with drones and ground robots, to fully automate the process of collecting head inclination data.

Preoperative Planning for Shoulder Arthroplasty is Feasible with Computed Tomography at Lower-Than-Conventional Radiation Doses

Computed tomography (CT) offers a detailed assessment of the shoulder for preoperative shoulder arthroplasty planning; however, this technique exposes the patient to ionizing radiation. The purpose of this study was to prospectively evaluate the practicality of reducing the CT radiation dose compared to conventional dose levels for manual and preoperative planning software measurements for shoulder arthroplasty. A total of 10 shoulder CT examinations were performed for preoperative planning purposes on a dual x-ray source CT scanner. A specialized dose-split scan technique was utilized to reconstruct CT images corresponding to 100%, 70%, and 30% radiation dose relative to our institution's standard of care imaging protocol. Glenoid version, inclination, and humeral head subluxation were measured manually by three authors and by commercially available software platforms. These measurements were analyzed for agreement between the 100%, 70%, and 30% dose levels for each patient. Tolerances of 5° of glenoid version, 5° of glenoid inclination, and 10% humeral head subluxation were used as equivalent for preoperative planning. Automated measurements of 70% dose images were within 5° of version, 5° of inclination, and 10% subluxation in 95.0% of cases. Manual measurements of 70% RD images were within 5° of version for 90.0% of cases, 5° of inclination in 86.7% of cases, and 10% subluxation in 100% of cases. Automated measurements from the 30% dose images were within 5° of version, 5° of inclination, and 10% subluxation for 100% of cases. Manual measurements from the 30% dose images were within 5° of version for 86.7% of cases, 5° of inclination in 76.7% of cases, and 10% subluxation in 100% of cases. The mean absolute difference in software measurement of glenoid version (p = 0.96), glenoid inclination (p = 0.64), or humeral head subluxation (p = 0.09) or in aggregated manual mean absolute difference of version (p = 0.22), inclination (p = 0.31), or humeral head subluxation (p = 0.56) was not significant. Good to excellent reliability was determined by interclass correlation coefficients among the manual observers and automatic software platforms for measurements at all doses (P<0.001) CONCLUSIONS: The results indicate that both preoperative planning software platforms and human observers produced similar measurements of glenoid version, inclination, and humeral head subluxation from reduced-dose images compared to standard of care doses. By implementing reduced dose techniques in preoperative shoulder CT, the potential risks associated with radiation exposure could be reduced for patients undergoing shoulder arthroplasty.

Effect of interproximal enamel reduction on interradicular bone volume in clear aligner therapy: a three-dimensional cone-beam computed tomography study.

To assess the effect of inter-proximal enamel reduction (IPR) on interradicular bone volume and incisal inclination in patients undergoing clear aligner therapy (CAT). The study sample consisted of 60 cases which underwent orthodontic CAT, in a private clinic in Dammam, KSA. A total of 120 CBCT scans (60 pre-treatment and 60 post- treatment) were measured using the CS 3D Imaging software to examine bone volume (using height, width, and depth of the interproximal area) and incisal inclination. The corresponding ClinCheck models were collected to determine the amount and locations of interproximal reduction performed. Little's Irregularity Index values were measured using OrthoCAD software. Paired sample t-test was used to address the measurements of bone height, width, depth, bone volume, and inclination of upper and lower incisors before and after IPR. IPR did not affect the upper or lower bone volume except at LR3-2 and UL 2 - 1 where a significant difference between the bone volume with and without IPR was detected (p = 0.02 and p = 0.04 respectively). Upper and lower incisor inclination showed a statistically significant decrease after IPR. There was no correlation between IPR and bone volume difference between upper and lower teeth except at LR3-2 and UL 2 - 1. IPR had no significant effect on inter-radicular bone volume except at areas of lower right canine-lateral and at areas of upper left central-lateral. There was a positive correlation between the amount of IPR and incisal inclination. The current study findings suggest that while IPR has a minimal and localized effect on bone volume in certain areas, it plays a role in adjusting incisal inclination, highlighting its significance in the careful planning of orthodontic treatment using clear aligners.

Photogrammetry protocol in babies with congenital torticollis: part 1 – inter-arch intraoral assessment

Torticollis is defined as an imbalance of the sternocleidomastoid muscle (SCM), with less extension of the neck, resulting in a preference to turn the head more from one side to the other. The characteristics frequently found are: ear contralateral to the torticollis displaced forward, facial asymmetry, and contralateral occipital flattening, as well as a smaller ipsilateral eye, causing misalignment of the eyes. This condition can also cause mandibular inclination (MI), in the frontal plane, with a difference in opening between the maxilla and mandible from one side or the other. The diagnosis and treatment of torticollis are routinely carried out by the physiotherapist and the diagnosis of this mandibular inclination is traditionally through visual examination. This assessment of mandibular inclination, carried out by the dentist, in an objective manner, can contribute to the diagnosis and also to the monitoring of proposed treatments that should reduce mandibular asymmetries. The objective of this study was to create a protocol for objective measurement of the distance between the maxilla and mandible, on the right and left sides, using photogrammetry, to detect whether mandibular inclination can be observed by the shorter inter-arch distance on the side corresponding to the torticollis. Case reports of two babies (1 baby aged 9 months and another aged 1 year and 1 month), diagnosed with congenital torticollis. Photogrammetry was carried out: the babies were positioned on a dental stretcher and photographed in maximum opening, intermediate, and closing positions. Using the photos and the IMAGE J program, measurements between the maxilla and mandible were taken (see photogrammetry description). Results: The measurement protocol used in both babies confirmed the greater mandibular inclination by approaching the hemi-arch corresponding to the side of the torticollis, compared to the opposite side. Objective measurement of mandibular inclination can be part of the timely diagnosis for congenital torticollis. Studies with an adequate sample size and methodology are necessary to confirm this diagnostic tool.

Highly sensitive fiber-optic inclinometer utilizing a polymer waveguide-embedded interferometric sensor

A highly sensitive fiber-optic inclination sensor using a modal interferometer was proposed in the present study, which has a photopolymer embedded in a single-mode-few-mode-single-mode fiber (SMF-FMF-SMF) interferometric structure. The sensing component for inclination measurement consists of a cured ellipsoidal photopolymerized-waveguide (EPW) connecting the ends of the FMF and SMF. The effect of EPW on the transmission spectrum and sensitivity of the sensor is specifically investigated using simulation and experiment. In addition, during the preparation of the sensor, it was found that EPW affects the cladding pattern where the FMF is at a low frequency, and a more stable interference pattern can be obtained by modulating the FMF length. The results demonstrate a notable tilt sensitivity of 4.43 dB per degree within the range of 4.4° to 11.4°. Moreover, a change in inclination angle causes misalignment of the FMF and SMF cores, which results in a variation in fringe contrast (FC), allowing a one-to-one correspondence between fringe contrast and θ to be established over a wider range of 0° to 11.4° with an error of less than 3%. The proposed sensor has low temperature crosstalk and is able to cope with disturbances in complex environments. It is expected to be used for microdeformation monitoring of engineered structures.

When Games Influence Words: Gaming Addiction among College Students Increases Verbal Aggression through Risk-Biased Drifting in Decision-Making.

Increased aggression due to gaming addiction is a widespread and highly publicized problem. The underlying processes by which verbal aggression, a more harmful and persistent subcategory of aggression, is affected by gaming addiction may differ from other types of aggression. In this study, data came from 252 randomly recruited current university students (50.79% male, mean age 19.60 years, SD: 1.44 years, range 17 to 29 years). Participants reported gaming addiction and different types of aggression through questionnaires. In addition, two important explanatory processes, inhibitory control, and risk preference, were measured through behavioral experiments. A Bayesian hierarchical drift-diffusion model was employed to interpret the data from the risk preference task. In contrast to previous work, the study found that inhibitory control did not significantly correlate with either gaming addiction or any form of aggression However, the drift rate, a measure of decision-making inclination under risk, partially mediates the relationship between gaming addiction and verbal aggression (but not other forms of aggression). The findings illuminate risk preference under adverse conditions as a key predictor of verbal aggression, offering avenues for early intervention and suggesting game design modifications to mitigate verbal aggression by adjusting reward mechanisms.

Evaluation of Normal Ranges of Wrist Radiologic Indexes in Jordanian Population.

The wrist is a complex joint that plays a role in several everyday tasks. Various radiological indices have been created to assess the alignment and structure of the wrist using standard X-ray images. Nevertheless, these indicators may differ based on variables such as age, gender, ethnicity, handedness, and wrist position. This research aimed to assess the radiological indices of the wrist in a group of healthy people from Jordan and investigate the impact of age and gender on these indices. We obtained data from a sample of 385 patients who presented at our hospital with minor non-specific wrist pain and satisfied the specified criteria for inclusion. We conducted measurements of radial inclination, radial height, volar tilt, ulnar variance, and carpal height ratio using both anteroposterior and lateral views of the wrist. We used linear regression and independent sample t-test to examine the correlation between age, gender, and radiological indicators. The reliability of the measurements was assessed using the intraclass correlation coefficient (ICC). Our study revealed a negative correlation between age and carpal height ratio (r = -0.13, p = 0.03). However, no significant gender differences were seen in any of the radiological indices (p > 0.05). Our findings indicate that ulnar variance had the greatest level of reliability across observers, with an intra-observer intraclass correlation coefficient (ICC) of 0.95 and an inter-observer ICC of 0.8. Conversely, volar tilt exhibited the lowest inter-observer reliability, with an ICC of 0.1.Our results provide a valuable point of reference for the wrist morphology and alignment in the Jordanian population. Our suggestion is that the carpal height ratio might indicate alterations in the wrist joint due to aging, whereas ulnar variation may serve as a dependable indicator of wrist alignment. We suggest doing more research to investigate the biological and anatomical factors behind these results and to compare them with other demographic groups.

The Relationship between Structure of the Wrist and Function in a Japanese and Caucasian Population.

Background: Factors such as age and joint structure affect normal wrist motion. The midcarpal joint participates in flexion/extension, radial-ulnar/deviation (RUD), and since lunate/wrist type-2 is likely more stable than a lunate/wrist type-1, we suggest that midcarpal joint structure will affect wrist motion. Our purpose was to compare wrist motion in Caucasian and Japanese populations and to associate motion with midcarpal joint morphology. We hypothesised that radiographic structure would correlate with wrist motion. Methods: A total of 164 patients with normal wrist radiographs were included. Clinical measurements included wrist extension, flexion and RUD. Radiographic measurements included the radiocarpal joint: ulnar variance, radial height, radial inclination, volar inclination and carpal joint measurements: lunate type, capitate circumference and each of its joints contact measured and calculated as a proportion of capitate circumference. Results: The groups differed in wrist motion and in multiple radiographic measurements. When the two populations were analysed together, there were no significant associations between midcarpal joint type and wrist motion. The radiocarpal joint: ulnar variance was correlated with extension and radial deviation. Radial height was directly related to flexion, and both radial height and radial inclination were directly correlated with ulnar deviation. The intracarpal measurements: The main measurement affecting motion was the contact between the capitate and the scaphoid (as a proportion of capitate circumference) with lesser correlations of the contact of the capitate with the trapezoid and hamate. The most significant measurement associated with a lunate type-2 was scaphoid contact with the capitate p = 0.01. Logistic regression demonstrated that the measurements most associated with wrist motion were scaphoid contact with the capitate/capitate circumference and hamate contact with the capitate/capitate. Conclusions: This study supports discrepancies in wrist motion amongst different racial cohorts, and a relationship between bone/joint structure in the wrist and wrist motion. This can help treat wrist pathology. Level of Evidence: Level III (Diagnostic).

Predictive Probability of Localization Curves (P-POL) for Structures with Changing Environmental Conditions

One of the fundamental challenges in structural health monitoring (SHM) is the lack of data from the damaged state, which is required to verify the automated damage detection algorithms. In this paper, a recently developed approach is presented that allows one to assess the detectability of damages before they occur. The approach is based on so-called probability of detection curves that can be evaluated based on data and a model from the undamaged structure, in a “predictive” way. The method is based on four fundamental assumptions: the damage-sensitive features can be approximated through a normal distribution, the variance in the measurement remains constant for different damage scenarios, an analytical model of the examined structure is available for the sensitivity computation, and the relationship between measurements and structural changes can be linearized for small structural changes. In previous publications, this approach has already been applied to natural frequency and mode shape monitoring as well as ultrasonic testing. In this paper, it is applied to strain and inclination measurements from numerical case studies for the first time, demonstrating the universality of the method. Moreover, it is analyzed how changes in the environmental and operational variables (EOVs) affect the predicted POD. The results demonstrate that the predicted POD are valid even in the presence of environmental changes, but they depend on the user-defined hyperparameters of the algorithms that remove the environmental effects from the measurements. Therefore, the hyperparameter selection is critically discussed and an optimal monitoring strategy is outlined.

Measurement of the Acetabular Cup Orientation After Total Hip Arthroplasty Based on 3-Dimensional Reconstruction From a Single X-Ray Image Using Generative Adversarial Networks

BackgroundThe purpose of this study was to reconstruct 3-dimensional (3D) computed tomography (CT) images from single anteroposterior (AP) postoperative total hip arthroplasty (THA) X-ray images using a deep learning algorithm known as generative adversarial networks (GANs) and to validate the accuracy of cup angle measurement on GAN-generated CT. MethodsWe used 2 GAN-based models, CycleGAN and X2CT-GAN, to generate 3D CT images from X-ray images of 386 patients who underwent primary THAs using a cementless cup. The training dataset consisted of 522 CT images and 2,282 X-ray images. The image quality was validated using the peak signal-to-noise ratio and the structural similarity index measure. The cup anteversion and inclination measurements on the GAN-generated CT images were compared with the actual CT measurements. Statistical analyses of absolute measurement errors were performed using Mann–Whitney U tests and nonlinear regression analyses. ResultsThe study successfully achieved 3D reconstruction from single AP postoperative THA X-ray images using GANs, exhibiting excellent peak signal-to-noise ratio (37.40) and structural similarity index measure (0.74). The median absolute difference in radiographic anteversion was 3.45° and the median absolute difference in radiographic inclination was 3.25°, respectively. Absolute measurement errors tended to be larger in cases with cup malposition than in those with optimal cup orientation. ConclusionsThis study demonstrates the potential of GANs for 3D reconstruction from single AP postoperative THA X-ray images to evaluate cup orientation. Further investigation and refinement of this model are required to improve its performance.

Research and application of a flexible measuring array for deep displacement of landslides

Abstract. The multidimensional and multi-sliding surface measurement of deep-seated displacement on landslides poses a significant technical challenge in landslide monitoring and early warning. The fixed-borehole inclinometer serves as an important measurement method based on drilling for this purpose. In this study, a novel flexible measurement array for deep-seated landslide displacement and its installation and measurement processes were developed, enabling higher accuracy in full-hole multidimensional deformation measurement. The measurement array consists of individual measurement probes as basic units, connected in series through coaxial cables and high-pressure rubber hoses, forming a flexible measurement array. Each probe is equipped with acceleration and magnetic field sensors, allowing for the measurement of borehole inclination and azimuth angles and providing a more comprehensive understanding of the deformation of deep-seated landslides. This flexible measurement array resolves the limitations of traditional fixed inclinometers, such as limited probe quantity or inaccurate installation positions that fail to reflect the deformation trend of the landslide body. Moreover, it eliminates the need for auxiliary installation accessories like pulleys and inclinometer pipes, simplifying the mechanical structure and installation process, which represents an advancement in methodology and an improvement in measurement techniques. This array provides a more comprehensive and improved monitoring tool for disaster prevention and mitigation, thereby enhancing the level of geological hazard monitoring and early warning technology.

Perception of maxillary incisor inclination and its correlation with dental cephalometric measurements.

To correlate the clinical perception of maxillary incisor inclination from photographs of the smiling face with cephalometric measurements, using conventional incisor axis reference points and crown reference points. Cross-sectional study. Department of Orthodontics, School of Dentistry, University of Lisbon (Portugal). Eight orthodontists. The perception of maxillary incisor inclination of 47 female patients (mean age 23.4 ± 1.5 years) was evaluated by eight orthodontists. The participants' photographs (smiling frontal, smiling three-quarter and smiling profile) were shown to each assessor and a continuous visual analogue rating scale was used to assess the perception of maxillary incisor inclination. Pearson's correlation and linear regression were calculated between each cephalometric measurement and the perception of incisor inclination. Anatomical crown inclination measurements U1ac-FH (r = 0.854; P < 0.01) and U1ac-SN (r = 0.845; P < 0.01) had the highest correlation values with the assessors' perception of maxillary incisor inclination. Conventional incisor axis measurements showed the lowest correlation values (r = 0.668-0.756). Cephalometric measurements of the labial surface of the anatomical crown of the maxillary incisors showed the strongest correlations with the clinical perception of maxillary incisor inclination from photographs. For optimal aesthetics, the inclination of the labial surface of maxillary incisor crown should be evaluated.

Volar fixed plating of distal radius fractures: optimizing plate position for enhanced clinical outcomes

BackgroundThe precise influence of plate position on clinical outcomes in the context of volar fixed-angle plating for distal radius fractures is not fully understood. This article aims to investigate the influence of plate position on clinical results, and functional outcomes in patients treated with volar fixed plating for distal radius fractures.MethodsA total of 58 patients with 64 distal radius fractures were included in the study. Patient demographics, fracture characteristics, surgical details, and radiographic data were collected. Post-operative AP and Lat views of all patients taken on the first day after surgery were evaluated. Volar Tilt, Radial Inclination and Radial Height measurements were used as reduction criteria. In the follow-up, the patients were called for their last control, flexion and extension angles of the wrist and Mayo Wrist Scores, the distance of the plate to the joint line and the angle between the plate and the radial shaft were measured and recorded.ResultsA total of 64 distal radius fractures, with a mean age of 46.9 years, and the mean follow-up period 24.9 months were included in this study. There was a significant relationship between the Radial Inclination and Plate-Shaft Angle variables and the Mayo Wrist Score at a 99% confidence interval. Additionally, a relationship was observed between the Radial Height variable and the Mayo Score at a 90% confidence interval. A significant positive association was observed between radial inclination and achieving a Good-to-Excellent Mayo score (OR = 1.28, 95% CI [1.08–1.51], p = 0.004). Plate distance to joint line demonstrated a marginally significant positive association with a Good-to-Excellent Mayo score (OR = 1.31, 95% CI [0.97–1.77], p = 0.077). Univariate analysis revealed a significant negative association between plate-shaft angle and achieving a Good-to-Excellent Mayo score (OR = 0.71, 95% CI [0.52–0.99], p = 0.045). This negative association remained statistically significant in the multivariate analysis (p = 0.016).ConclusionRadial inclination, plate distance to joint line, and angle between plate and radius shaft were identified as significant factors associated with improved Mayo Wrist Scores.

Early Radiographic and Clinical Outcomes of an Additive-Manufactured Acetabular Component

BackgroundAdditive manufacturing has recently gained popularity and is widely adopted in the orthopaedic industry. However, there is a paucity of literature on the radiographic and clinical outcomes of these relatively novel components. The aim of this study was to assess the 2-year clinical and radiographic outcomes of a specific additive-manufactured acetabular component in primary total hip arthroplasty. MethodsWe performed a retrospective review of 60 patients who underwent primary total hip arthroplasty with the use of the Stryker’s TRIDENT II acetabular component. Evaluation of radiographs was performed at 6 weeks, 1 year, and 2 years postoperatively. Radiographs were evaluated for radiolucencies in Charnley and DeLee zones, signs of biologic fixation, and acetabular inclination and anteversion measurements. Patient-reported outcomes and complications were also obtained. ResultsThere were no cases of component loosening or changes in component position during follow-up, with an average follow-up time of 1.7 years. A radiolucent line was identified in one patient in zone 1 at 6 weeks; this was absent at 1 year. Radiographic signs of cup biologic fixation were present in 85% of cases by final follow-up. The average inclination was 45.1 (SD = 4.0), and the average anteversion was 26.9 (SD = 5.2). Patient-Reported Outcomes Measurement Information System scores significantly increased at the final follow-up, and there were no complications in this cohort. ConclusionsThis study demonstrated excellent radiographic and clinical outcomes with this novel additive-manufactured acetabular component at early follow-up. Although longer-term follow-up is warranted, this additively manufactured highly porous titanium acetabular component demonstrated excellent biologic fixation and reliable fixation at mid-term follow-up.

Relation between Photogrammetry and Spinal Mouse for Lumbopelvic Assessment in Adolescents with Thoracic Kyphosis.

The evaluation of the lumbopelvic region is a crucial point during postural assessment in childhood and adolescence. Photogrammetry (PG) and Spinal Mouse (SM) are two of the most debated tools to properly analyze postural alignment and avoid misleading data. This study aims to find out the best linear regression model that could relate the analytic measurements of the SM with one or more PG parameters in adolescents with kyphotic postures. Thirty-nine adolescents (female = 35.9%) with structural and non-structural kyphosis were analyzed (13.2 ± 1.8 years; 1.59 ± 0.12 m; 47.6 ± 11.8 kg) using the SM and PG on the sagittal plane in a standing and forward-bending position, allowing for the measurement of body vertical inclination, lumbar and pelvic alignment, trunk flexion, sacral inclination during bending, and hip position during bending. Lordosis lumbar angles (SM) were significantly (r = -0.379, r = -0.328) correlated with the SIPS-SIAS angle (PG) during upright standing, while in the bending position, the highest correlation appeared among the sacral-hip (SM) and the sacral tangent (ST_PG; r = -0.72) angles. The stepwise backward procedure was assessed to estimate the SM variability in the bending and standing positions. Only in the bending position did the linear regression model reach high goodness-of-fit values with two regressors (ST_PG η2=0.504, BMI η2=0.252; adjusted- R2 =0.558, p < 0.001, CCC = 0.972, r = 0.763). Despite gold-standard methods reducing error evaluation, physicians and kinesiologists may consider photogrammetry as a good method for spinal curve prediction.

Timescales of mafic magmatic fractionation documented by paleosecular variation in basaltic drill core, Snake River Plain volcanic province, Idaho, USA

The timescales over which fractional crystallization and recharge work in mafic volcano-plutonic provinces is subject to great uncertainty. Currently modeled processes are subject to the scale of measurement: monogenetic basaltic fields accumulate over hundreds of thousands of years, consistent with U-Th-Ra isotopic variations that imply 50% crystallization of basic magmas on timescales of 100,000 years or more, whereas crystal diffusion modeling implies phenocryst residence times of ∼1−1000 years. Monogenetic basalts of the Snake River Plain in southern Idaho, USA, are up to 2 km thick and postdate passage over the Yellowstone−Snake River Plain hotspot. Detailed lithologic and geophysical logging of core from deep drill holes, along with chemical stratigraphy and high-resolution paleomagnetic inclination measurements, document individual eruptive units, compound lava flows, and basaltic flow groups that accumulated over 1−6 m.y. Hiatuses are commonly marked by loess or fluvial interbeds that vary from ∼0.1 m thick to 20 m thick. Radiometric (40Ar-39Ar, detrital zircon U-Pb) and paleomagnetic timescale ages show that the deepest hole (Kimama drill hole, 1912 m total depth) accumulated over ∼6 m.y. Cycles of fractional crystallization and recharge are recognized in the chemical stratigraphy as up-section shifts in major and trace elements; these fractionation cycles commonly represent 40%−50% fractionation. Individual fractionation cycles may comprise 20−40 eruptive units (8−17 lava flows) with little to no change in paleomagnetic inclination (0°−1°), whereas adjacent cycles may differ by several degrees from one another or reflect changes in polarity. Rates of paleosecular variation in Holocene lavas and sediments dated using 14C document significant shifts in magnetic inclination over short timescales, ranging from ∼0.05° to 2°/decade, with an average of ∼0.5°/decade and a minimum rate of 0.05°/decade. This implies that fractionation cycles with ≤1° variation in magnetic inclination formed on timescales of a few decades up to a few centuries (20−200 years). Thus, the lavas collectively represent only a few thousand years of eruptive activity, with major flow groups separated in time by tens to hundreds of thousands of years. We suggest that the rates defined by paleosecular variation capture the timescales of magmatic chamber evolution (fractionation/recharge) in the seismically imaged mid-crustal sill complex; in contrast, we suggest that crystal diffusion modeling captures the residence times in shallow subvolcanic magmatic chambers that underlie individual monogenetic volcanoes.

Transmission line tower inclination measurement method based on three-dimensional laser scanning and inter frame difference

Abstract The purpose of this study is to propose a method based on three-dimensional laser scanning and frame difference technology to measure the inclination of transmission line towers, so as to realize accurate monitoring of transmission line structure. Firstly, the multi-scale Retinex algorithm is used to enhance and preprocess the transmission line tower image to improve the image quality. Secondly, the method of frame difference and background difference is combined to detect and identify the inclined tower. Finally, the point cloud data of inclined tower is obtained by using three-dimensional laser scanning technology, and the inclination of transmission line tower is calculated by coordinates. The experimental results show that this method has high accuracy and reliability, with an error of less than 0.15 × 10−5 and an inclination of less than 0.17°. It is proved that this method can improve the monitoring efficiency of transmission lines, has good effects in engineering practice, and can provide effective means for the safe operation of transmission line structures.